Ian Kent [Thu, 3 Jan 2019 23:27:33 +0000 (15:27 -0800)]
autofs: improve ioctl sbi checks
Al Viro made some suggestions to improve the implementation of commit 3aa60e2f25 ("fix autofs_sbi() does not check super block type").
The check is unnecessary in all cases except for ioctl usage so placing
the check in the super block accessor function adds a small overhead to
the common case where it isn't needed.
So it's sufficient to do this in the ioctl code only.
Also the check in the ioctl code is needlessly complex.
[akpm@linux-foundation.org: declare autofs_fs_type in .h, not .c] Link: http://lkml.kernel.org/r/154296970987.9889.1597442413573683096.stgit@pluto-themaw-net Signed-off-by: Ian Kent <raven@themaw.net> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Thu, 3 Jan 2019 23:27:26 +0000 (15:27 -0800)]
fs/epoll: deal with wait_queue only once
There is no reason why we rearm the waitiqueue upon every fetch_events
retry (for when events are found yet send_events() fails). If nothing
else, this saves four lock operations per retry, and furthermore reduces
the scope of the lock even further.
[akpm@linux-foundation.org: restore code to original position, fix and reflow comment] Link: http://lkml.kernel.org/r/20181114182532.27981-2-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Thu, 3 Jan 2019 23:27:22 +0000 (15:27 -0800)]
fs/epoll: rename check_events label to send_events
It is currently called check_events because it, well, did exactly that.
However, since the lockless ep_events_available() call, the label no
longer checks, but just sends the events. Rename as such.
Link: http://lkml.kernel.org/r/20181114182532.27981-1-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Thu, 3 Jan 2019 23:27:19 +0000 (15:27 -0800)]
fs/epoll: avoid barrier after an epoll_wait(2) timeout
Upon timeout, we can just exit out of the loop, without the cost of the
changing the task's state with an smp_store_mb call. Just exit out of
the loop and be done - setting the task state afterwards will be, of
course, redundant.
Davidlohr Bueso [Thu, 3 Jan 2019 23:27:15 +0000 (15:27 -0800)]
fs/epoll: reduce the scope of wq lock in epoll_wait()
This patch aims at reducing ep wq.lock hold times in epoll_wait(2). For
the blocking case, there is no need to constantly take and drop the
spinlock, which is only needed to manipulate the waitqueue.
The call to ep_events_available() is now lockless, and only exposed to
benign races. Here, if false positive (returns available events and
does not see another thread deleting an epi from the list) we call into
send_events and then the list's state is correctly seen. Otoh, if a
false negative and we don't see a list_add_tail(), for example, from irq
callback, then it is rechecked again before blocking, which will see the
correct state.
In order for more accuracy to see concurrent list_del_init(), use the
list_empty_careful() variant -- of course, this won't be safe against
insertions from wakeup.
For the overflow list we obviously need to prevent load/store tearing as
we don't want to see partial values while the ready list is disabled.
Davidlohr Bueso [Thu, 3 Jan 2019 23:27:09 +0000 (15:27 -0800)]
fs/epoll: drop ovflist branch prediction
The ep->ovflist is a secondary ready-list to temporarily store events
that might occur when doing sproc without holding the ep->wq.lock. This
accounts for every time we check for ready events and also send events
back to userspace; both callbacks, particularly the latter because of
copy_to_user, can account for a non-trivial time.
As such, the unlikely() check to see if the pointer is being used, seems
both misleading and sub-optimal. In fact, we go to an awful lot of
trouble to sync both lists, and populating the ovflist is far from an
uncommon scenario.
For example, profiling a concurrent epoll_wait(2) benchmark, with
CONFIG_PROFILE_ANNOTATED_BRANCHES shows that for a two threads a 33%
incorrect rate was seen; and when incrementally increasing the number of
epoll instances (which is used, for example for multiple queuing load
balancing models), up to a 90% incorrect rate was seen.
Similarly, by deleting the prediction, 3% throughput boost was seen
across incremental threads.
Link: http://lkml.kernel.org/r/20181108051006.18751-4-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current logic is a bit convoluted. Lets simplify this with a
standard list_for_each_entry_safe() loop instead and just break out
after maxevents is reached.
While at it, remove an unnecessary indentation level in the loop when
there are in fact ready events.
Link: http://lkml.kernel.org/r/20181108051006.18751-3-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Davidlohr Bueso [Thu, 3 Jan 2019 23:27:02 +0000 (15:27 -0800)]
fs/epoll: remove max_nests argument from ep_call_nested()
Patch series "epoll: some miscellaneous optimizations".
The following are some incremental optimizations on some of the epoll
core. Each patch has the details, but together, the series is seen to
shave off measurable cycles on a number of systems and workloads.
For example, on a 40-core IB, a pipetest as well as parallel
epoll_wait() benchmark show around a 20-30% increase in raw operations
per second when the box is fully occupied (incremental thread counts),
and up to 15% performance improvement with lower counts.
Passes ltp epoll related testcases.
This patch(of 6):
All callers pass the EP_MAX_NESTS constant already, so lets simplify
this a tad and get rid of the redundant parameter for nested eventpolls.
Link: http://lkml.kernel.org/r/20181108051006.18751-2-dave@stgolabs.net Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Thu, 3 Jan 2019 23:26:59 +0000 (15:26 -0800)]
checkpatch: warn on const char foo[] = "bar"; declarations
These declarations should generally be static const to avoid poor
compilation and runtime performance where compilers tend to initialize
the const declaration for every call instead of using .rodata for the
string.
Miscellanea:
- Convert spaces to tabs for indentation in 2 adjacent checks
huang.zijiang [Thu, 3 Jan 2019 23:26:55 +0000 (15:26 -0800)]
drivers/firmware/memmap.c: modify memblock_alloc to memblock_alloc_nopanic
memblock_alloc() never returns NULL because panic never returns.
Link: http://lkml.kernel.org/r/1545640882-42009-1-git-send-email-huang.zijiang@zte.com.cn Signed-off-by: huang.zijiang <huang.zijiang@zte.com.cn> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Yi Wang <wang.yi59@zte.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Huang Shijie [Thu, 3 Jan 2019 23:26:51 +0000 (15:26 -0800)]
lib/genalloc.c: use vzalloc_node() to allocate the bitmap
Some devices may have big memory on chip, such as over 1G. In some
cases, the nbytes maybe bigger then 4M which is the bounday of the
memory buddy system (4K default).
So use vzalloc_node() to allocate the bitmap. Also use vfree to free
it.
Yury Norov [Thu, 3 Jan 2019 23:26:48 +0000 (15:26 -0800)]
lib/find_bit_benchmark.c: align test_find_next_and_bit with others
Contrary to other tests, test_find_next_and_bit() test uses tab
formatting in output and get_cycles() instead of ktime_get().
get_cycles() is not supported by some arches, so ktime_get() fits better
in generic code.
Fix it and minor style issues, so the output looks like this:
Alexey Skidanov [Thu, 3 Jan 2019 23:26:44 +0000 (15:26 -0800)]
lib/genalloc.c: fix allocation of aligned buffer from non-aligned chunk
gen_pool_alloc_algo() uses different allocation functions implementing
different allocation algorithms. With gen_pool_first_fit_align()
allocation function, the returned address should be aligned on the
requested boundary.
If chunk start address isn't aligned on the requested boundary, the
returned address isn't aligned too. The only way to get properly
aligned address is to initialize the pool with chunks aligned on the
requested boundary. If want to have an ability to allocate buffers
aligned on different boundaries (for example, 4K, 1MB, ...), the chunk
start address should be aligned on the max possible alignment.
This happens because gen_pool_first_fit_align() looks for properly
aligned memory block without taking into account the chunk start address
alignment.
To fix this, we provide chunk start address to
gen_pool_first_fit_align() and change its implementation such that it
starts looking for properly aligned block with appropriate offset
(exactly as is done in CMA).
Matthew Wilcox [Thu, 3 Jan 2019 23:26:41 +0000 (15:26 -0800)]
fls: change parameter to unsigned int
When testing in userspace, UBSAN pointed out that shifting into the sign
bit is undefined behaviour. It doesn't really make sense to ask for the
highest set bit of a negative value, so just turn the argument type into
an unsigned int.
Some architectures (eg ppc) already had it declared as an unsigned int,
so I don't expect too many problems.
Link: http://lkml.kernel.org/r/20181105221117.31828-1-willy@infradead.org Signed-off-by: Matthew Wilcox <willy@infradead.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa [Thu, 3 Jan 2019 23:26:31 +0000 (15:26 -0800)]
kernel/hung_task.c: break RCU locks based on jiffies
check_hung_uninterruptible_tasks() is currently calling rcu_lock_break()
for every 1024 threads. But check_hung_task() is very slow if printk()
was called, and is very fast otherwise.
If many threads within some 1024 threads called printk(), the RCU grace
period might be extended enough to trigger RCU stall warnings.
Therefore, calling rcu_lock_break() for every some fixed jiffies will be
safer.
Link: http://lkml.kernel.org/r/1544800658-11423-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Liu, Chuansheng [Thu, 3 Jan 2019 23:26:27 +0000 (15:26 -0800)]
kernel/hung_task.c: force console verbose before panic
Based on commit 8d8429b66d43 ("kernel/hung_task.c: show all hung tasks
before panic"), we could get the call stack of hung task.
However, if the console loglevel is not high, we still can not see the
useful panic information in practice, and in most cases users don't set
console loglevel to high level.
This patch is to force console verbose before system panic, so that the
real useful information can be seen in the console, instead of being
like the following, which doesn't have hung task information.
INFO: task init:1 blocked for more than 120 seconds.
Tainted: G U W 4.19.0-quilt-2e5dc0ac-g51b6c21d76cc #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Kernel panic - not syncing: hung_task: blocked tasks
CPU: 2 PID: 479 Comm: khungtaskd Tainted: G U W 4.19.0-quilt-2e5dc0ac-g51b6c21d76cc #1
Call Trace:
dump_stack+0x4f/0x65
panic+0xde/0x231
watchdog+0x290/0x410
kthread+0x12c/0x150
ret_from_fork+0x35/0x40
reboot: panic mode set: p,w
Kernel Offset: 0x34000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Link: http://lkml.kernel.org/r/27240C0AC20F114CBF8149A2696CBE4A6015B675@SHSMSX101.ccr.corp.intel.com Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masahiro Yamada [Thu, 3 Jan 2019 23:26:23 +0000 (15:26 -0800)]
build_bug.h: remove most of dummy BUILD_BUG_ON stubs for Sparse
The introduction of these dummy BUILD_BUG_ON stubs dates back to commmit 15ee80e909b7 ("sparse: define dummy BUILD_BUG_ON definition for
sparse").
At that time, BUILD_BUG_ON() was implemented with the negative array
trick *and* the link-time trick, like this:
extern int __build_bug_on_failed;
#define BUILD_BUG_ON(condition) \
do { \
((void)sizeof(char[1 - 2*!!(condition)])); \
if (condition) __build_bug_on_failed = 1; \
} while(0)
Sparse is more strict about the negative array trick than GCC because
Sparse requires the array length to be really constant.
Here is the simple test code for the macro above:
static const int x = 0;
BUILD_BUG_ON(x);
GCC is absolutely fine with it (-Wvla was enabled only very recently),
but Sparse warns like this:
error: bad constant expression
error: cannot size expression
(If you are using a newer version of Sparse, you will see a different
warning message, "warning: Variable length array is used".)
Anyway, Sparse was producing many false positives, and noisier than it
should be at that time.
With the previous commit, the leftover negative array trick is gone.
Sparse is fine with the current BUILD_BUG_ON(), which is implemented by
using the 'error' attribute.
I am keeping the stub for BUILD_BUG_ON_ZERO(). Otherwise, Sparse would
complain about the following code, which GCC is fine with:
static const int x = 0;
int y = BUILD_BUG_ON_ZERO(x);
Link: http://lkml.kernel.org/r/1542856462-18836-3-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masahiro Yamada [Thu, 3 Jan 2019 23:26:20 +0000 (15:26 -0800)]
build_bug.h: remove negative-array fallback for BUILD_BUG_ON()
The kernel can only be compiled with an optimization option (-O2, -Os,
or the currently proposed -Og). Hence, __OPTIMIZE__ is always defined
in the kernel source.
The fallback for the -O0 case is just hypothetical and pointless.
Moreover, commit 091879a91829 ("Makefile: Globally enable VLA warning")
enabled -Wvla warning. The use of variable length arrays is banned.
Link: http://lkml.kernel.org/r/1542856462-18836-2-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are three processing functions dealing with digital parameters,
__do_proc_dointvec/__do_proc_douintvec/__do_proc_doulongvec_minmax.
This patch deals with __do_proc_doulongvec_minmax, just as
__do_proc_dointvec does, adding a check for parameters 'left'. In
__do_proc_douintvec, its code implementation explicitly does not support
multiple inputs.
static int __do_proc_douintvec(...){
...
/*
* Arrays are not supported, keep this simple. *Do not* add
* support for them.
*/
if (vleft != 1) {
*lenp = 0;
return -EINVAL;
}
...
}
So, just __do_proc_doulongvec_minmax has the problem. And most use of
proc_doulongvec_minmax/proc_doulongvec_ms_jiffies_minmax just have one
parameter.
Link: http://lkml.kernel.org/r/1544081775-15720-1-git-send-email-cheng.lin130@zte.com.cn Signed-off-by: Cheng Lin <cheng.lin130@zte.com.cn> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Eric Biggers [Thu, 3 Jan 2019 23:26:00 +0000 (15:26 -0800)]
fs/proc/util.c: include fs/proc/internal.h for name_to_int()
name_to_int() is defined in fs/proc/util.c and declared in
fs/proc/internal.h, but the declaration isn't included at the point of
the definition. Include the header to enforce that the definition
matches the declaration.
This addresses a gcc warning when -Wmissing-prototypes is enabled.
Link: http://lkml.kernel.org/r/20181115001833.49371-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Benjamin Gordon [Thu, 3 Jan 2019 23:25:56 +0000 (15:25 -0800)]
fs/proc/base.c: use ns_capable instead of capable for timerslack_ns
Access to timerslack_ns is controlled by a process having CAP_SYS_NICE
in its effective capability set, but the current check looks in the root
namespace instead of the process' user namespace. Since a process is
allowed to do other activities controlled by CAP_SYS_NICE inside a
namespace, it should also be able to adjust timerslack_ns.
Link: http://lkml.kernel.org/r/20181030180012.232896-1-bmgordon@google.com Signed-off-by: Benjamin Gordon <bmgordon@google.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: John Stultz <john.stultz@linaro.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: "Serge E. Hallyn" <serge@hallyn.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Oren Laadan <orenl@cellrox.com> Cc: Ruchi Kandoi <kandoiruchi@google.com> Cc: Rom Lemarchand <romlem@android.com> Cc: Todd Kjos <tkjos@google.com> Cc: Colin Cross <ccross@android.com> Cc: Nick Kralevich <nnk@google.com> Cc: Dmitry Shmidt <dimitrysh@google.com> Cc: Elliott Hughes <enh@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 3 Jan 2019 02:56:59 +0000 (18:56 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
"A tiny pull request this merge window unfortunately, should get more
material in for the next release:
- new driver for Raspberry Pi's touchscreen (firmware interface)
- miscellaneous input driver fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - add ACPI ID for touchpad in ASUS Aspire F5-573G
Input: atmel_mxt_ts - don't try to free unallocated kernel memory
Input: drv2667 - fix indentation issues
Input: touchscreen - fix coding style issue
Input: add official Raspberry Pi's touchscreen driver
Input: nomadik-ske-keypad - fix a loop timeout test
Input: rotary-encoder - don't log EPROBE_DEFER to kernel log
Input: olpc_apsp - remove set but not used variable 'np'
Input: olpc_apsp - enable the SP clock
Input: olpc_apsp - check FIFO status on open(), not probe()
Input: olpc_apsp - drop CONFIG_OLPC dependency
clk: mmp2: add SP clock
dt-bindings: marvell,mmp2: Add clock id for the SP clock
Input: ad7879 - drop platform data support
Linus Torvalds [Thu, 3 Jan 2019 02:54:45 +0000 (18:54 -0800)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio/vhost updates from Michael Tsirkin:
"Features, fixes, cleanups:
- discard in virtio blk
- misc fixes and cleanups"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost: correct the related warning message
vhost: split structs into a separate header file
virtio: remove deprecated VIRTIO_PCI_CONFIG()
vhost/vsock: switch to a mutex for vhost_vsock_hash
virtio_blk: add discard and write zeroes support
Linus Torvalds [Thu, 3 Jan 2019 02:49:58 +0000 (18:49 -0800)]
Merge tag 'for-4.21/block-20190102' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
- Dead code removal for loop/sunvdc (Chengguang)
- Mark BIDI support for bsg as deprecated, logging a single dmesg
warning if anyone is actually using it (Christoph)
- blkcg cleanup, killing a dead function and making the tryget_closest
variant easier to read (Dennis)
- Floppy fixes, one fixing a regression in swim3 (Finn)
- lightnvm use-after-free fix (Gustavo)
- gdrom leak fix (Wenwen)
- a set of drbd updates (Lars, Luc, Nathan, Roland)
* tag 'for-4.21/block-20190102' of git://git.kernel.dk/linux-block: (28 commits)
block/swim3: Fix regression on PowerBook G3
block/swim3: Fix -EBUSY error when re-opening device after unmount
block/swim3: Remove dead return statement
block/amiflop: Don't log error message on invalid ioctl
gdrom: fix a memory leak bug
lightnvm: pblk: fix use-after-free bug
block: sunvdc: remove redundant code
block: loop: remove redundant code
bsg: deprecate BIDI support in bsg
blkcg: remove unused __blkg_release_rcu()
blkcg: clean up blkg_tryget_closest()
drbd: Change drbd_request_detach_interruptible's return type to int
drbd: Avoid Clang warning about pointless switch statment
drbd: introduce P_ZEROES (REQ_OP_WRITE_ZEROES on the "wire")
drbd: skip spurious timeout (ping-timeo) when failing promote
drbd: don't retry connection if peers do not agree on "authentication" settings
drbd: fix print_st_err()'s prototype to match the definition
drbd: avoid spurious self-outdating with concurrent disconnect / down
drbd: do not block when adjusting "disk-options" while IO is frozen
drbd: fix comment typos
...
Linus Torvalds [Thu, 3 Jan 2019 02:43:57 +0000 (18:43 -0800)]
Merge tag 'devprop-4.21-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework fixes from Rafael Wysocki:
"Fix two potential NULL pointer dereferences found by Coverity in the
software nodes code introduced recently (Colin Ian King)"
* tag 'devprop-4.21-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
drivers: base: swnode: check if swnode is NULL before dereferencing it
drivers: base: swnode: check if pointer p is NULL before dereferencing it
Linus Torvalds [Thu, 3 Jan 2019 02:41:38 +0000 (18:41 -0800)]
Merge tag 'mailbox-v4.21' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- Introduce device-managed registration
devm_mbox_controller_un/register and convert drivers to use it
- Introduce flush api to support clients that must busy-wait in atomic
context
- Support multiple controllers per device
- Hi3660: a bugfix and constify ops structure
- TI-MsgMgr: off by one bugfix.
- BCM: switch to spdx license
- Tegra-HSP: support for shared mailboxes and suspend/resume.
* tag 'mailbox-v4.21' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (30 commits)
mailbox: tegra-hsp: Use device-managed registration API
mailbox: tegra-hsp: use devm_kstrdup_const()
mailbox: tegra-hsp: Add suspend/resume support
mailbox: tegra-hsp: Add support for shared mailboxes
dt-bindings: tegra186-hsp: Add shared mailboxes
mailbox: Allow multiple controllers per device
mailbox: Support blocking transfers in atomic context
mailbox: ti-msgmgr: Use device-managed registration API
mailbox: stm32-ipcc: Use device-managed registration API
mailbox: rockchip: Use device-managed registration API
mailbox: qcom-apcs: Use device-managed registration API
mailbox: platform-mhu: Use device-managed registration API
mailbox: omap: Use device-managed registration API
mailbox: mtk-cmdq: Remove needless devm_kfree() calls
mailbox: mtk-cmdq: Use device-managed registration API
mailbox: xgene-slimpro: Use device-managed registration API
mailbox: sti: Use device-managed registration API
mailbox: altera: Use device-managed registration API
mailbox: imx: Use device-managed registration API
mailbox: hi6220: Use device-managed registration API
...
Linus Torvalds [Thu, 3 Jan 2019 02:39:22 +0000 (18:39 -0800)]
Merge branch 'for-linus-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- DISCARD support for our block device driver
- Many TLB flush optimizations
- Various smaller fixes
- And most important, Anton agreed to help me maintaining UML
* 'for-linus-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Remove obsolete reenable_XX calls
um: writev needs <sys/uio.h>
Add Anton Ivanov to UML maintainers
um: remove redundant generic-y
um: Optimize Flush TLB for force/fork case
um: Avoid marking pages with "changed protection"
um: Skip TLB flushing where not needed
um: Optimize TLB operations v2
um: Remove unnecessary faulted check in uaccess.c
um: Add support for DISCARD in the UBD Driver
um: Remove unsafe printks from the io thread
um: Clean-up command processing in UML UBD driver
um: Switch to block-mq constants in the UML UBD driver
um: Make GCOV depend on !KCOV
um: Include sys/uio.h to have writev()
um: Add HAVE_DEBUG_BUGVERBOSE
um: Update maintainers file entry
Linus Torvalds [Thu, 3 Jan 2019 02:37:01 +0000 (18:37 -0800)]
Merge tag 's390-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Martin Schwidefsky:
- A larger update for the zcrypt / AP bus code:
+ Update two inline assemblies in the zcrypt driver to make gcc happy
+ Add a missing reply code for invalid special commands for zcrypt
+ Allow AP device reset to be triggered from user space
+ Split the AP scan function into smaller, more readable functions
- Updates for vfio-ccw and vfio-ap
+ Add maintainers and reviewer for vfio-ccw
+ Include facility.h in vfio_ap_drv.c to avoid fragile include chain
+ Simplicy vfio-ccw state machine
- Use the common code version of bust_spinlocks
- Make use of the DEFINE_SHOW_ATTRIBUTE
- Fix three incorrect file permissions in the DASD driver
- Remove bit spin-lock from the PCI interrupt handler
- Fix GFP_ATOMIC vs GFP_KERNEL in the PCI code
* tag 's390-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: rework ap scan bus code
s390/zcrypt: make sysfs reset attribute trigger queue reset
s390/pci: fix sleeping in atomic during hotplug
s390/pci: remove bit_lock usage in interrupt handler
s390/drivers: fix proc/debugfs file permissions
s390: convert to DEFINE_SHOW_ATTRIBUTE
MAINTAINERS/vfio-ccw: add Farhan and Eric, make Halil Reviewer
vfio: ccw: Merge BUSY and BOXED states
s390: use common bust_spinlocks()
s390/zcrypt: improve special ap message cmd handling
s390/ap: rework assembler functions to use unions for in/out register variables
s390: vfio-ap: include <asm/facility> for test_facility()
Linus Torvalds [Thu, 3 Jan 2019 00:35:23 +0000 (16:35 -0800)]
Merge tag 'nfs-for-4.21-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"Stable bugfixes:
- xprtrdma: Yet another double DMA-unmap # v4.20
Features:
- Allow some /proc/sys/sunrpc entries without CONFIG_SUNRPC_DEBUG
- Per-xprt rdma receive workqueues
- Drop support for FMR memory registration
- Make port= mount option optional for RDMA mounts
Other bugfixes and cleanups:
- Remove unused nfs4_xdev_fs_type declaration
- Fix comments for behavior that has changed
- Remove generic RPC credentials by switching to 'struct cred'
- Fix crossing mountpoints with different auth flavors
- Various xprtrdma fixes from testing and auditing the close code
- Fixes for disconnect issues when using xprtrdma with krb5
- Clean up and improve xprtrdma trace points
- Fix NFS v4.2 async copy reboot recovery"
* tag 'nfs-for-4.21-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (63 commits)
sunrpc: convert to DEFINE_SHOW_ATTRIBUTE
sunrpc: Add xprt after nfs4_test_session_trunk()
sunrpc: convert unnecessary GFP_ATOMIC to GFP_NOFS
sunrpc: handle ENOMEM in rpcb_getport_async
NFS: remove unnecessary test for IS_ERR(cred)
xprtrdma: Prevent leak of rpcrdma_rep objects
NFSv4.2 fix async copy reboot recovery
xprtrdma: Don't leak freed MRs
xprtrdma: Add documenting comment for rpcrdma_buffer_destroy
xprtrdma: Replace outdated comment for rpcrdma_ep_post
xprtrdma: Update comments in frwr_op_send
SUNRPC: Fix some kernel doc complaints
SUNRPC: Simplify defining common RPC trace events
NFS: Fix NFSv4 symbolic trace point output
xprtrdma: Trace mapping, alloc, and dereg failures
xprtrdma: Add trace points for calls to transport switch methods
xprtrdma: Relocate the xprtrdma_mr_map trace points
xprtrdma: Clean up of xprtrdma chunk trace points
xprtrdma: Remove unused fields from rpcrdma_ia
xprtrdma: Cull dprintk() call sites
...
Linus Torvalds [Thu, 3 Jan 2019 00:21:50 +0000 (16:21 -0800)]
Merge tag 'nfsd-4.21' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Thanks to Vasily Averin for fixing a use-after-free in the
containerized NFSv4.2 client, and cleaning up some convoluted
backchannel server code in the process.
Otherwise, miscellaneous smaller bugfixes and cleanup"
* tag 'nfsd-4.21' of git://linux-nfs.org/~bfields/linux: (25 commits)
nfs: fixed broken compilation in nfs_callback_up_net()
nfs: minor typo in nfs4_callback_up_net()
sunrpc: fix debug message in svc_create_xprt()
sunrpc: make visible processing error in bc_svc_process()
sunrpc: remove unused xpo_prep_reply_hdr callback
sunrpc: remove svc_rdma_bc_class
sunrpc: remove svc_tcp_bc_class
sunrpc: remove unused bc_up operation from rpc_xprt_ops
sunrpc: replace svc_serv->sv_bc_xprt by boolean flag
sunrpc: use-after-free in svc_process_common()
sunrpc: use SVC_NET() in svcauth_gss_* functions
nfsd: drop useless LIST_HEAD
lockd: Show pid of lockd for remote locks
NFSD remove OP_CACHEME from 4.2 op_flags
nfsd: Return EPERM, not EACCES, in some SETATTR cases
sunrpc: fix cache_head leak due to queued request
nfsd: clean up indentation, increase indentation in switch statement
svcrdma: Optimize the logic that selects the R_key to invalidate
nfsd: fix a warning in __cld_pipe_upcall()
nfsd4: fix crash on writing v4_end_grace before nfsd startup
...
Linus Torvalds [Wed, 2 Jan 2019 20:11:01 +0000 (12:11 -0800)]
Merge tag '9p-for-4.21' of git://github.com/martinetd/linux
Pull 9p updates from Dominique Martinet:
"Missing prototype warning fix and a syzkaller fix when a 9p server
advertises a too small msize"
* tag '9p-for-4.21' of git://github.com/martinetd/linux:
9p/net: put a lower bound on msize
net/9p: include trans_common.h to fix missing prototype warning.
Linus Torvalds [Wed, 2 Jan 2019 20:08:29 +0000 (12:08 -0800)]
Merge tag '4.21-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
- four fixes for stable
- improvements to DFS including allowing failover to alternate targets
- some small performance improvements
* tag '4.21-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: (39 commits)
cifs: update internal module version number
cifs: we can not use small padding iovs together with encryption
cifs: Minor Kconfig clarification
cifs: Always resolve hostname before reconnecting
cifs: Add support for failover in cifs_reconnect_tcon()
cifs: Add support for failover in smb2_reconnect()
cifs: Only free DFS target list if we actually got one
cifs: start DFS cache refresher in cifs_mount()
cifs: Use GFP_ATOMIC when a lock is held in cifs_mount()
cifs: Add support for failover in cifs_reconnect()
cifs: Add support for failover in cifs_mount()
cifs: remove set but not used variable 'sep'
cifs: Make use of DFS cache to get new DFS referrals
cifs: minor updates to documentation
cifs: check kzalloc return
cifs: remove set but not used variable 'server'
cifs: Use kzfree() to free password
cifs: Fix to use kmem_cache_free() instead of kfree()
cifs: update for current_kernel_time64() removal
cifs: Add DFS cache routines
...
Linus Torvalds [Wed, 2 Jan 2019 19:05:43 +0000 (11:05 -0800)]
Merge branch 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull TPM updates from James Morris:
- Support for partial reads of /dev/tpm0.
- Clean up for TPM 1.x code: move the commands to tpm1-cmd.c and make
everything to use the same data structure for building TPM commands
i.e. struct tpm_buf.
* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (25 commits)
tpm: add support for partial reads
tpm: tpm_ibmvtpm: fix kdoc warnings
tpm: fix kdoc for tpm2_flush_context_cmd()
tpm: tpm_try_transmit() refactor error flow.
tpm: use u32 instead of int for PCR index
tpm1: reimplement tpm1_continue_selftest() using tpm_buf
tpm1: reimplement SAVESTATE using tpm_buf
tpm1: rename tpm1_pcr_read_dev to tpm1_pcr_read()
tpm1: implement tpm1_pcr_read_dev() using tpm_buf structure
tpm: tpm1: rewrite tpm1_get_random() using tpm_buf structure
tpm: tpm-space.c remove unneeded semicolon
tpm: tpm-interface.c drop unused macros
tpm: add tpm_auto_startup() into tpm-interface.c
tpm: factor out tpm_startup function
tpm: factor out tpm 1.x pm suspend flow into tpm1-cmd.c
tpm: move tpm 1.x selftest code from tpm-interface.c tpm1-cmd.c
tpm: factor out tpm1_get_random into tpm1-cmd.c
tpm: move tpm_getcap to tpm1-cmd.c
tpm: move tpm1_pcr_extend to tpm1-cmd.c
tpm: factor out tpm_get_timeouts()
...
Linus Torvalds [Wed, 2 Jan 2019 18:46:03 +0000 (10:46 -0800)]
block: don't use un-ordered __set_current_state(TASK_UNINTERRUPTIBLE)
This mostly reverts commit 39f3f4e69ba8 ("block: avoid ordered task
state change for polled IO"). It was wrongly claiming that the ordering
wasn't necessary. The memory barrier _is_ necessary.
If something is truly polling and not going to sleep, it's the whole
state setting that is unnecessary, not the memory barrier. Whenever you
set your state to a sleeping state, you absolutely need the memory
barrier.
Note that sometimes the memory barrier can be elsewhere. For example,
the ordering might be provided by an external lock, or by setting the
process state to sleeping before adding yourself to the wait queue list
that is used for waking up (where the wait queue lock itself will
guarantee that any wakeup will correctly see the sleeping state).
But none of those cases were true here.
NOTE! Some of the polling paths may indeed be able to drop the state
setting entirely, at which point the memory barrier also goes away.
(Also note that this doesn't revert the TASK_RUNNING cases: there is no
race between a wakeup and setting the process state to TASK_RUNNING,
since the end result doesn't depend on ordering).
Linus Torvalds [Wed, 2 Jan 2019 17:48:13 +0000 (09:48 -0800)]
Merge branch 'next-seccomp' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull seccomp updates from James Morris:
- Add SECCOMP_RET_USER_NOTIF
- seccomp fixes for sparse warnings and s390 build (Tycho)
* 'next-seccomp' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
seccomp, s390: fix build for syscall type change
seccomp: fix poor type promotion
samples: add an example of seccomp user trap
seccomp: add a return code to trap to userspace
seccomp: switch system call argument type to void *
seccomp: hoist struct seccomp_data recalculation higher
Linus Torvalds [Wed, 2 Jan 2019 17:43:14 +0000 (09:43 -0800)]
Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull integrity updates from James Morris:
"In Linux 4.19, a new LSM hook named security_kernel_load_data was
upstreamed, allowing LSMs and IMA to prevent the kexec_load syscall.
Different signature verification methods exist for verifying the
kexec'ed kernel image. This adds additional support in IMA to prevent
loading unsigned kernel images via the kexec_load syscall,
independently of the IMA policy rules, based on the runtime "secure
boot" flag. An initial IMA kselftest is included.
In addition, this pull request defines a new, separate keyring named
".platform" for storing the preboot/firmware keys needed for verifying
the kexec'ed kernel image's signature and includes the associated IMA
kexec usage of the ".platform" keyring.
(David Howell's and Josh Boyer's patches for reading the
preboot/firmware keys, which were previously posted for a different
use case scenario, are included here)"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
integrity: Remove references to module keyring
ima: Use inode_is_open_for_write
ima: Support platform keyring for kernel appraisal
efi: Allow the "db" UEFI variable to be suppressed
efi: Import certificates from UEFI Secure Boot
efi: Add an EFI signature blob parser
efi: Add EFI signature data types
integrity: Load certs to the platform keyring
integrity: Define a trusted platform keyring
selftests/ima: kexec_load syscall test
ima: don't measure/appraise files on efivarfs
x86/ima: retry detecting secure boot mode
docs: Extend trusted keys documentation for TPM 2.0
x86/ima: define arch_get_ima_policy() for x86
ima: add support for arch specific policies
ima: refactor ima_init_policy()
ima: prevent kexec_load syscall based on runtime secureboot flag
x86/ima: define arch_ima_get_secureboot
integrity: support new struct public_key_signature encoding field
Multipathing: In case of NFSv3, rpc_clnt_test_and_add_xprt() adds
the xprt to xprt switch (i.e. xps) if rpc_call_null_helper() returns
success. But in case of NFSv4.1, it needs to do EXCHANGEID to verify
the path along with check for session trunking.
Add the xprt in nfs4_test_session_trunk() only when
nfs4_detect_session_trunking() returns success. Also release refcount
hold by rpc_clnt_setup_test_and_add_xprt().
J. Bruce Fields [Thu, 20 Dec 2018 15:42:36 +0000 (10:42 -0500)]
sunrpc: convert unnecessary GFP_ATOMIC to GFP_NOFS
It's OK to sleep here, we just don't want to recurse into the filesystem
as a writeout could be waiting on this.
Future work: the documentation for GFP_NOFS says "Please try to avoid
using this flag directly and instead use memalloc_nofs_{save,restore} to
mark the whole scope which cannot/shouldn't recurse into the FS layer
with a short explanation why. All allocation requests will inherit
GFP_NOFS implicitly."
But I'm not sure where to do this. Should the workqueue be arranging
that for us in the case of workqueues created with WQ_MEM_RECLAIM?
Reported-by: Trond Myklebust <trondmy@hammer.space> Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
J. Bruce Fields [Thu, 20 Dec 2018 15:35:11 +0000 (10:35 -0500)]
sunrpc: handle ENOMEM in rpcb_getport_async
If we ignore the error we'll hit a null dereference a little later.
Reported-by: syzbot+4b98281f2401ab849f4b@syzkaller.appspotmail.com Signed-off-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Fri, 7 Dec 2018 16:11:44 +0000 (11:11 -0500)]
xprtrdma: Prevent leak of rpcrdma_rep objects
If a reply has been processed but the RPC is later retransmitted
anyway, the req->rl_reply field still contains the only pointer to
the old rpcrdma rep. When the next reply comes in, the reply handler
will stomp on the rl_reply field, leaking the old rep.
A trace event is added to capture such leaks.
This problem seems to be worsened by the restructuring of the RPC
Call path in v4.20. Fully addressing this issue will require at
least a re-architecture of the disconnect logic, which is not
appropriate during -rc.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Original commit (6ff973cc549c "NFS recover from destination server
reboot for copies") used memcmp() and then it was changed to use
nfs4_stateid_match_other() but that function returns opposite of
memcmp. As the result, recovery can't find the copy leading
to copy hanging.
Fixes: 93050c4597bb ("NFSv4: Split out NFS v4.2 copy completion functions") Fixes: aeddfe2c9e35 ("NFS: Split out the body of nfs4_reclaim_open_state") Signed-of-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 16:00:32 +0000 (11:00 -0500)]
xprtrdma: Replace outdated comment for rpcrdma_ep_post
Since commit b26c40b92a5a ("xprtrdma: Move Receive posting to
Receive handler"), rpcrdma_ep_post is no longer responsible for
posting Receive buffers. Update the documenting comment to reflect
this change.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 16:00:27 +0000 (11:00 -0500)]
xprtrdma: Update comments in frwr_op_send
Commit 5b579bda0b95 ("xprtrdma: Chain Send to FastReg WRs") was
written before commit c87dd00fd5a7 ("xprtrdma: Replace all usage of
"frmr" with "frwr""), but was merged afterwards. Thus it still
refers to FRMR and MWs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 16:00:11 +0000 (11:00 -0500)]
NFS: Fix NFSv4 symbolic trace point output
These symbolic values were not being displayed in string form.
TRACE_DEFINE_ENUM was missing in many cases. It also turns out that
__print_symbolic wants an unsigned long in the first field...
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 15:59:33 +0000 (10:59 -0500)]
xprtrdma: Simplify locking that protects the rl_allreqs list
Clean up: There's little chance of contention between the use of
rb_lock and rb_reqslock, so merge the two. This avoids having to
take both in some (possibly future) cases.
Transport tear-down is already serialized, thus there is no need for
locking at all when destroying rpcrdma_reqs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 15:59:23 +0000 (10:59 -0500)]
xprtrdma: Remove request_module from backchannel
Since commit e89042e0abf1 ("rpcrdma: Merge svcrdma and xprtrdma
modules into one"), the forward and backchannel components are part
of the same kernel module. A separate request_module() call in the
backchannel code is no longer necessary.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 15:59:17 +0000 (10:59 -0500)]
xprtrdma: Recognize XDRBUF_SPARSE_PAGES
Commit 6d7ded6b7123 ("SUNRPC: Add a label for RPC calls that require
allocation on receive") didn't update similar logic in rpc_rdma.c.
I don't think this is a bug, per-se; the commit just adds more
careful checking for broken upper layer behavior.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 15:59:12 +0000 (10:59 -0500)]
NFS: Make "port=" mount option optional for RDMA mounts
Having to specify "proto=rdma,port=20049" is cumbersome.
RFC 8267 Section 6.3 requires NFSv4 clients to use "the alternative
well-known port number", which is 20049. Make the use of the well-
known port number automatic, just as it is for NFS/TCP and port
2049.
For NFSv2/3, Section 4.2 allows clients to simply choose 20049 as
the default or use rpcbind. I don't know of an NFS/RDMA server
implementation that registers it's NFS/RDMA service with rpcbind,
so automatically choosing 20049 seems like the better choice. The
other widely-deployed NFS/RDMA client, Solaris, also uses 20049
as the default port.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 15:59:07 +0000 (10:59 -0500)]
xprtrdma: Plant XID in on-the-wire RDMA offset (FRWR)
Place the associated RPC transaction's XID in the upper 32 bits of
each RDMA segment's rdma_offset field. There are two reasons to do
this:
- The R_key only has 8 bits that are different from registration to
registration. The XID adds more uniqueness to each RDMA segment to
reduce the likelihood of a software bug on the server reading from
or writing into memory it's not supposed to.
- On-the-wire RDMA Read and Write requests do not otherwise carry
any identifier that matches them up to an RPC. The XID in the
upper 32 bits will act as an eye-catcher in network captures.
Suggested-by: Tom Talpey <ttalpey@microsoft.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 15:59:01 +0000 (10:59 -0500)]
xprtrdma: Remove rpcrdma_memreg_ops
Clean up: Now that there is only FRWR, there is no need for a memory
registration switch. The indirect calls to the memreg operations can
be replaced with faster direct calls.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 15:58:56 +0000 (10:58 -0500)]
xprtrdma: Remove support for FMR memory registration
FMR is not supported on most recent RDMA devices. It is also less
secure than FRWR because an FMR memory registration can expose
adjacent bytes to remote reading or writing. As discussed during the
RDMA BoF at LPC 2018, it is time to remove support for FMR in the
NFS/RDMA client stack.
Note that NFS/RDMA server-side uses either local memory registration
or FRWR. FMR is not used.
There are a few Infiniband/RoCE devices in the kernel tree that do
not appear to support MEM_MGT_EXTENSIONS (FRWR), and therefore will
not support client-side NFS/RDMA after this patch. These are:
- mthca
- qib
- hns (RoCE)
Users of these devices can use NFS/TCP on IPoIB instead.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 15:58:51 +0000 (10:58 -0500)]
xprtrdma: Reduce max_frwr_depth
Some devices advertise a large max_fast_reg_page_list_len
capability, but perform optimally when MRs are significantly smaller
than that depth -- probably when the MR itself is no larger than a
page.
By default, the RDMA R/W core API uses max_sge_rd as the maximum
page depth for MRs. For some devices, the value of max_sge_rd is
1, which is also not optimal. Thus, when max_sge_rd is larger than
1, use that value. Otherwise use the value of the
max_fast_reg_page_list_len attribute.
I've tested this with CX-3 Pro, FastLinq, and CX-5 devices. It
reproducibly improves the throughput of large I/Os by several
percent.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 15:58:45 +0000 (10:58 -0500)]
xprtrdma: Fix ri_max_segs and the result of ro_maxpages
With certain combinations of krb5i/p, MR size, and r/wsize, I/O can
fail with EMSGSIZE. This is because the calculated value of
ri_max_segs (the max number of MRs per RPC) exceeded
RPCRDMA_MAX_HDR_SEGS, which caused Read or Write list encoding to
walk off the end of the transport header.
Once that was addressed, the ro_maxpages result has to be corrected
to account for the number of MRs needed for Reply chunks, which is
2 MRs smaller than a normal Read or Write chunk.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 15:58:40 +0000 (10:58 -0500)]
xprtrdma: Don't wake pending tasks until disconnect is done
Transport disconnect processing does a "wake pending tasks" at
various points.
Suppose an RPC Reply is being processed. The RPC task that Reply
goes with is waiting on the pending queue. If a disconnect wake-up
happens before reply processing is done, that reply, even if it is
good, is thrown away, and the RPC has to be sent again.
This window apparently does not exist for socket transports because
there is a lock held while a reply is being received which prevents
the wake-up call until after reply processing is done.
To resolve this, all RPC replies being processed on an RPC-over-RDMA
transport have to complete before pending tasks are awoken due to a
transport disconnect.
Callers that already hold the transport write lock may invoke
->ops->close directly. Others use a generic helper that schedules
a close when the write lock can be taken safely.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 15:58:35 +0000 (10:58 -0500)]
xprtrdma: No qp_event disconnect
After thinking about this more, and auditing other kernel ULP imple-
mentations, I believe that a DISCONNECT cm_event will occur after a
fatal QP event. If that's the case, there's no need for an explicit
disconnect in the QP event handler.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 15:58:29 +0000 (10:58 -0500)]
xprtrdma: Replace rpcrdma_receive_wq with a per-xprt workqueue
To address a connection-close ordering problem, we need the ability
to drain the RPC completions running on rpcrdma_receive_wq for just
one transport. Give each transport its own RPC completion workqueue,
and drain that workqueue when disconnecting the transport.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 15:58:24 +0000 (10:58 -0500)]
xprtrdma: Refactor Receive accounting
Clean up: Divide the work cleanly:
- rpcrdma_wc_receive is responsible only for RDMA Receives
- rpcrdma_reply_handler is responsible only for RPC Replies
- the posted send and receive counts both belong in rpcrdma_ep
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Chuck Lever [Wed, 19 Dec 2018 15:58:13 +0000 (10:58 -0500)]
xprtrdma: Yet another double DMA-unmap
While chasing yet another set of DMAR fault reports, I noticed that
the frwr recycler conflates whether or not an MR has been DMA
unmapped with frwr->fr_state. Actually the two have only an indirect
relationship. It's in fact impossible to guess reliably whether the
MR has been DMA unmapped based on its fr_state field, especially as
the surrounding code and its assumptions have changed over time.
A better approach is to track the DMA mapping status explicitly so
that the recycler is less brittle to unexpected situations, and
attempts to DMA-unmap a second time are prevented.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: stable@vger.kernel.org # v4.20 Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Linus Torvalds [Tue, 1 Jan 2019 23:55:29 +0000 (15:55 -0800)]
Merge tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU updates from Joerg Roedel:
- Page table code for AMD IOMMU now supports large pages where smaller
page-sizes were mapped before. VFIO had to work around that in the
past and I included a patch to remove it (acked by Alex Williamson)
- Patches to unmodularize a couple of IOMMU drivers that would never
work as modules anyway.
- Work to unify the the iommu-related pointers in 'struct device' into
one pointer. This work is not finished yet, but will probably be in
the next cycle.
- NUMA aware allocation in iommu-dma code
- Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver
- Scalable mode support for the Intel VT-d driver
- PM runtime improvements for the ARM-SMMU driver
- Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom
- Various smaller fixes and improvements
* tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits)
iommu: Check for iommu_ops == NULL in iommu_probe_device()
ACPI/IORT: Don't call iommu_ops->add_device directly
iommu/of: Don't call iommu_ops->add_device directly
iommu: Consolitate ->add/remove_device() calls
iommu/sysfs: Rename iommu_release_device()
dmaengine: sh: rcar-dmac: Use device_iommu_mapped()
xhci: Use device_iommu_mapped()
powerpc/iommu: Use device_iommu_mapped()
ACPI/IORT: Use device_iommu_mapped()
iommu/of: Use device_iommu_mapped()
driver core: Introduce device_iommu_mapped() function
iommu/tegra: Use helper functions to access dev->iommu_fwspec
iommu/qcom: Use helper functions to access dev->iommu_fwspec
iommu/of: Use helper functions to access dev->iommu_fwspec
iommu/mediatek: Use helper functions to access dev->iommu_fwspec
iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec
iommu/dma: Use helper functions to access dev->iommu_fwspec
iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec
ACPI/IORT: Use helper functions to access dev->iommu_fwspec
iommu: Introduce wrappers around dev->iommu_fwspec
...
Linus Torvalds [Tue, 1 Jan 2019 23:45:48 +0000 (15:45 -0800)]
Merge tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
"This includes a new driver, removes R-Mobile APE6 as it is no longer
used, sprd cyclic dma support, last batch of dma_slave_config
direction removal and random updates to bunch of drivers.
Summary:
- New driver for UniPhier MIO DMA controller
- Remove R-Mobile APE6 support
- Sprd driver updates and support for cyclic link-list
- Remove dma_slave_config direction usage from rest of drivers
- Minor updates to dmatest, dw-dmac, zynqmp and bcm dma drivers"
* tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (48 commits)
dmaengine: qcom_hidma: convert to DEFINE_SHOW_ATTRIBUTE
dmaengine: pxa: remove DBGFS_FUNC_DECL()
dmaengine: mic_x100_dma: convert to DEFINE_SHOW_ATTRIBUTE
dmaengine: amba-pl08x: convert to DEFINE_SHOW_ATTRIBUTE
dmaengine: Documentation: Add documentation for multi chan testing
dmaengine: dmatest: Add transfer_size parameter
dmaengine: dmatest: Add alignment parameter
dmaengine: dmatest: Use fixed point div to calculate iops
dmaengine: dmatest: Add support for multi channel testing
dmaengine: rcar-dmac: Document R8A774C0 bindings
dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0
dmaengine: zynqmp_dma: replace spin_lock_bh with spin_lock_irqsave
dmaengine: sprd: Add me as one of the module authors
dmaengine: sprd: Support DMA 2-stage transfer mode
dmaengine: sprd: Support DMA link-list cyclic callback
dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma channel
dmaengine: sprd: Fix the last link-list configuration
dmaengine: sprd: Get transfer residue depending on the transfer direction
dmaengine: sprd: Remove direction usage from struct dma_slave_config
dmaengine: dmatest: fix a small memory leak in dmatest_func()
...
Linus Torvalds [Tue, 1 Jan 2019 23:38:14 +0000 (15:38 -0800)]
Merge tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson:
"Mostly clean ups although while Doug's was chasing down a odd lockdep
warning he also did some work to improved debugger resilience when
some CPUs fail to respond to the round up request.
The main changes are:
- Fixing a lockdep warning on architectures that cannot use an NMI
for the round up plus related changes to make CPU round up and all
CPU backtrace more resilient.
- Constify the arch ops tables
- A couple of other small clean ups
Two of the three patchsets here include changes that spill over into
arch/. Changes in the arch space are relatively narrow in scope (and
directly related to kgdb). Didn't get comprehensive acks but all
impacted maintainers were Cc:ed in good time"
* tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb/treewide: constify struct kgdb_arch arch_kgdb_ops
mips/kgdb: prepare arch_kgdb_ops for constness
kdb: use bool for binary state indicators
kdb: Don't back trace on a cpu that didn't round up
kgdb: Don't round up a CPU that failed rounding up before
kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function()
kgdb: Remove irq flags from roundup
Linus Torvalds [Tue, 1 Jan 2019 21:24:31 +0000 (13:24 -0800)]
Merge tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- new %ptR printk format
- rename core files
- allow registration of multiple nvmem devices
New driver:
- i.MX system controller RTC
Driver updates:
- abx80x: handle voltage ioctls, correct binding doc
- m41t80: correct month in alarm reads
- pcf85363: add pcf85263 support
- pcf8523: properly handle battery low flag
- s3c: limit alarm to one year in the future as ALMYEAR is broken
- sun6i: rework clock output binding"
* tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits)
rtc: rename core files
rtc: nvmem: fix possible use after free
rtc: add i.MX system controller RTC support
dt-bindings: fsl: scu: add rtc binding
rtc: pcf2123: Add Microcrystal rv2123
rtc: class: reimplement devm_rtc_device_register
rtc: enforce rtc_timer_init private_data type
rtc: abx80x: Implement RTC_VL_READ,CLR ioctls
rtc: pcf85363: Add support for NXP pcf85263 rtc
dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock
rtc: pcf8523: don't return invalid date when battery is low
dt-bindings: rtc: use a generic node name for ds1307
PM: Switch to use %ptR
m68k/mac: Switch to use %ptR
Input: hp_sdc_rtc - Switch to use %ptR
rtc: tegra: Switch to use %ptR
rtc: s5m: Switch to use %ptR
rtc: s3c: Switch to use %ptR
rtc: rx8025: Switch to use %ptR
rtc: rx6110: Switch to use %ptR
...
Linus Torvalds [Tue, 1 Jan 2019 21:19:16 +0000 (13:19 -0800)]
Merge tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have no core changes but lots of incremental development in drivers
all over the place: Renesas, NXP, Mediatek and Actions Semiconductor
keep churning out new SoCs.
I have some subtree maintainers for Renesas and Intel helping out to
keep down the load, it's been working smoothly (Samsung also have a
subtree but it was not used this cycle.)
New drivers:
- NXP (ex Freescale) i.MX 8 QXP SoC driver.
- Mediatek MT6797 SoC driver.
- Mediatek MT7629 SoC driver.
- Actions Semiconductor S700 SoC driver.
- Renesas RZ/A2 SoC driver.
- Allwinner sunxi suniv F1C100 SoC driver.
- Qualcomm PMS405 PMIC driver.
- Microsemi Ocelot Jaguar2 SoC driver.
Improvements:
- Some RT improvements (using raw spinlocks where appropriate).
- A lot of new pin sets on the Renesas PFC pin controllers.
- GPIO hogs now work on the Qualcomm SPMI/SSBI pin controller GPIO
chips, and Xway.
- Major modernization of the Intel pin control drivers.
- STM32 pin control driver will now synchronize usage of pins with
another CPU using a hardware spinlock"
* tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (145 commits)
dt-bindings: arm: fsl-scu: add imx8qm pinctrl support
pinctrl: freescale: Break dependency on SOC_IMX8MQ for i.MX8MQ
pinctrl: imx-scu: Depend on IMX_SCU
pinctrl: ocelot: Add dependency on HAS_IOMEM
pinctrl: ocelot: add MSCC Jaguar2 support
pinctrl: bcm: ns: support updated DT binding as syscon subnode
dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon
MAINTAINERS: merge at91 pinctrl entries
pinctrl: imx8qxp: break the dependency on SOC_IMX8QXP
pinctrl: uniphier: constify uniphier_pinctrl_socdata
pinctrl: mediatek: improve Kconfig dependencies
pinctrl: msm: mark PM functions as __maybe_unused
dt-bindings: pinctrl: sunxi: Add supply properties
pinctrl: meson: meson8b: add the missing GPIO_GROUPs for BOOT and CARD
pinctrl: meson: meson8: add the missing GPIO_GROUPs for BOOT and CARD
pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs"
pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins
pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins
pinctrl: sh-pfc: Make pinmux_cfg_reg.var_field_width[] variable-length
...
Linus Torvalds [Tue, 1 Jan 2019 21:16:45 +0000 (13:16 -0800)]
Merge tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add TQ-Systems TQMX86 watchdog driver
- add Qualcomm PM8916 watchdog driver
- w83627hf_wdt: add quirk for Inves system
- renesas_wdt: several improvements and document r8a774c0 support
- mena21_wdt, mtx-1: Convert to use GPIO descriptor
- bcm281xx, ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
- documentation: add PM usage and kernel-api: don't reference removed functions
- update bindings for MT7629 SoC
- several small fixes
* tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog: (22 commits)
watchdog: tqmx86: Add watchdog driver for the IO controller
dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support
watchdog: docs: kernel-api: don't reference removed functions
watchdog: add documentation for PM usage
watchdog: mtx-1: Convert to use GPIO descriptor
watchdog: mena21_wdt: Convert to GPIO descriptors
dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
watchdog: Add pm8916 watchdog driver
dt-bindings: watchdog: update bindings for MT7629 SoC
watchdog: renesas_wdt: don't keep timer value during suspend/resume
watchdog: ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE
watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE
watchdog: asm9260_wdt: make array mode_name static, shrinks object size
watchdog/hpwdt: Update driver version.
watchdog/hpwdt: Do not claim unsupported hardware
watchdog/hpwdt: Exclude via blacklist
Watchdog: remove outdated comment
watchdog: w83627hf_wdt: Add quirk for Inves system
watchdog: cpwd: add of_node_put()
watchdog: renesas_wdt: don't set divider while watchdog is running
...
Eric Biggers [Sat, 3 Nov 2018 17:30:35 +0000 (10:30 -0700)]
KEYS: fix parsing invalid pkey info string
We need to check the return value of match_token() for Opt_err before
doing anything with it.
[ Not only did the old "-1" value for Opt_err cause problems for the
__test_and_set_bit(), as fixed in commit bb22a623fd6a ("security:
don't use a negative Opt_err token index"), but accessing
"args[0].from" is invalid for the Opt_err case, as pointed out by Eric
later. - Linus ]
Reported-by: syzbot+a22e0dc07567662c50bc@syzkaller.appspotmail.com Fixes: d6d9537d1824 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]") Signed-off-by: Eric Biggers <ebiggers@google.com> Cc: stable@kernel.org # 4.20 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 1 Jan 2019 01:40:14 +0000 (17:40 -0800)]
Merge tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC defconfig updates from Olof Johansson:
"Most changes here are to enable new drivers and platforms in the
various configs that affect them. Most of these have been covered and
described in the other branches, we mostly keep defconfig separate to
avoid conflicts between SoC/dt/driver updates that they otherwise
would be grouped with.
One thing worth mentioning here is that OMAP changes from using their
own UART driver, to 8250, for the multi_v7_defconfig shared config on
32-bit. This means that the console is now named ttyS* instead of
ttyO*. This change was already done for omap2_defconfig a while back,
so most users of these configs have either already updated, or can
easily follow the same patterns as they did at that time. This makes
platform support slightly easier for distros, since they no longer
need to keep track of a separate console prefix for these platforms"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits)
Revert "arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO"
arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO
arm64: defconfig: Replace PINCTRL_MT7622 with PINCTRL_MTK_MOORE
arm64: defconfig: Regenerate for v4.20
ARM: multi_v7_defconfig: Add TOSHIBA TC358764 bridge driver
ARM: multi_v7_defconfig: Add MAX8952 regulator driver
ARM: exynos_defconfig: Add TOSHIBA TC358764 bridge driver
ARM: exynos_defconfig: Add MAX8952 regulator driver
ARM: exynos_defconfig: Add MAX8998 RTC and charger drivers
ARM: imx_v6_v7_defconfig: add imx7ulp support
ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX
ARM: multi_v7_defconfig: enable STM32 analog & timer drivers
arm64: defconfig: Enable GCC and PINCTRL for MSM8998
arm64: defconfig: Enable core Qualcomm SDM845 options
ARM: defconfig: Enable the PL111 DRM driver on vexpress
ARM: defconfig: Update the vexpress defconfig
arm64: defconfig: Enable some qcom remoteproc configs
arm64: defconfig: Enable QCS404 configs
ARM: imx_v6_v7_defconfig: Enable USB_ANNOUNCE_NEW_DEVICES
ARM: imx_v6_v7_defconfig: Enable BT_BNEP
...
Linus Torvalds [Tue, 1 Jan 2019 01:36:02 +0000 (17:36 -0800)]
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM Device-tree updates from Olof Johansson:
"As usual, this is where the bulk of our changes end up landing each
merge window.
The individual updates are too many to enumerate, many many platforms
have seen additions of device descriptions such that they are
functionally more complete (in fact, this is often the bulk of updates
we see).
Instead I've mostly focused on highlighting the new platforms below as
they are introduced. Sometimes the introduction is of mostly a
fragment, that later gets filled in on later releases, and in some
cases it's near-complete platform support. The latter is more common
for derivative platforms that already has similar support in-tree.
Two SoCs are slight outliers from the usual range of additions.
Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping
in the Lychee Pi Nano platform. At the other end is NXP Layerscape
LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O
aimed at infrastructure/networking.
TI updates stick out in the diff stats too, in particular because they
have moved the description of their L4 on-chip interconnect to
devicetree, which opens up for removal of even more of their
platform-specific 'hwmod' description tables over the next few
releases.
Linus Torvalds [Tue, 1 Jan 2019 01:32:35 +0000 (17:32 -0800)]
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson:
"Misc driver updates for platforms, many of them power related.
- Rockchip adds power domain support for rk3066 and rk3188
- Amlogic adds a power measurement driver
- Allwinner adds SRAM support for three platforms (F1C100, H5, A64
C1)
- Wakeup and ti-sysc (platform bus) fixes for OMAP/DRA7
- Broadcom fixes suspend/resume with Thumb2 kernels, and improves
stability of a handful of firmware/platform interfaces
- PXA completes their conversion to dmaengine framework
- Renesas does a bunch of PM cleanups across many platforms
- Tegra adds support for suspend/resume on T186/T194, which includes
some driver cleanups and addition of wake events
- Tegra also adds a driver for memory controller (EMC) on Tegra2
- i.MX tweaks power domain bindings, and adds support for i.MX8MQ in
GPC
- Atmel adds identifiers and LPDDR2 support for a new SoC, SAM9X60
and misc cleanups across several platforms"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (73 commits)
ARM: at91: add support in soc driver for new SAM9X60
ARM: at91: add support in soc driver for LPDDR2 SiP
memory: omap-gpmc: Use of_node_name_eq for node name comparisons
bus: ti-sysc: Check for no-reset and no-idle flags at the child level
ARM: OMAP2+: Check also the first dts child for hwmod flags
soc: amlogic: meson-clk-measure: Add missing REGMAP_MMIO dependency
soc: imx: gpc: Increase GPC_CLK_MAX to 7
soc: renesas: rcar-sysc: Fix power domain control after system resume
soc: renesas: rcar-sysc: Merge PM Domain registration and linking
soc: renesas: rcar-sysc: Remove rcar_sysc_power_{down,up}() helpers
soc: renesas: r8a77990-sysc: Fix initialization order of 3DG-{A,B}
dt-bindings: sram: sunxi: Add compatible for the A64 SRAM C1
dt-bindings: sram: sunxi: Add bindings for the H5 with SRAM C1
dt-bindings: sram: Add Allwinner suniv F1C100s
soc: sunxi: sram: Add support for the H5 SoC system control
soc: sunxi: sram: Enable EMAC clock access for H3 variant
soc: imx: gpcv2: add support for i.MX8MQ SoC
soc: imx: gpcv2: move register access table to domain data
soc: imx: gpcv2: prefix i.MX7 specific defines
dmaengine: pxa: make the filter function internal
...
Linus Torvalds [Tue, 1 Jan 2019 01:27:54 +0000 (17:27 -0800)]
Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm SoC platform updates from Olof Johansson:
"SoC updates, mostly refactorings and cleanups of old legacy platforms,
but also a few more things:
New SoC support this release:
- NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc)
- Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core
Cleanups of various platforms:
- OMAP1 ams-delta does some GPIO cleanups
- Davinci removes of at24 platform data
- Samsung cleans up old wakeup, PM debug and secondary core boot code
- Renesas moves around config options and PM code to drivers/soc for
sharing with 64-bit and more consistency
- i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug
console setups
- SoCFPGA adds explicit selection of ARM errata and removes some
unused code
This also contains a few patches that I had queued up as fixes for
4.20 but didn't send in before the release"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits)
arm64: dts: renesas: draak: Fix CVBS input
ARM: omap2: avoid section mismatch warning
ARM: tegra: avoid section mismatch warning
ARM: ks8695: fix section mismatch warning
ARM: pxa: avoid section mismatch warning
ARM: mmp: fix pxa168_device_usb_phy use on aspenite
ARM: mmp: fix timer_init calls
ARM: OMAP1: fix USB configuration for device-only setups
ARM: OMAP1: add MMC configuration for Palm Tungsten E
ARM: imx: fix dependencies on imx7ulp
ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
MAINTAINERS: add drivers/soc/amlogic/ to amlogic list
ARM: imx: add initial support for imx7ulp
ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed
ARM: dts: Fix OMAP4430 SDP Ethernet startup
ARM: dts: am335x-pdu001: Fix polarity of card detection input
ARM: OMAP1: ams-delta: Fix audio permanently muted
ARM: dts: omap5: Fix dual-role mode on Super-Speed port
arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
ARM: davinci: da850-evm: remove unnecessary include
...
Linus Torvalds [Mon, 31 Dec 2018 19:46:59 +0000 (11:46 -0800)]
Merge tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Rework of the kprobe/uprobe and synthetic events to consolidate all
the dynamic event code. This will make changes in the future easier.
- Partial rewrite of the function graph tracing infrastructure. This
will allow for multiple users of hooking onto functions to get the
callback (return) of the function. This is the ground work for having
kprobes and function graph tracer using one code base.
- Clean up of the histogram code that will facilitate adding more
features to the histograms in the future.
- Addition of str_has_prefix() and a few use cases. There currently is
a similar function strstart() that is used in a few places, but only
returns a bool and not a length. These instances will be removed in
the future to use str_has_prefix() instead.
- A few other various clean ups as well.
* tag 'trace-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
tracing: Use the return of str_has_prefix() to remove open coded numbers
tracing: Have the historgram use the result of str_has_prefix() for len of prefix
tracing: Use str_has_prefix() instead of using fixed sizes
tracing: Use str_has_prefix() helper for histogram code
string.h: Add str_has_prefix() helper function
tracing: Make function ‘ftrace_exports’ static
tracing: Simplify printf'ing in seq_print_sym
tracing: Avoid -Wformat-nonliteral warning
tracing: Merge seq_print_sym_short() and seq_print_sym_offset()
tracing: Add hist trigger comments for variable-related fields
tracing: Remove hist trigger synth_var_refs
tracing: Use hist trigger's var_ref array to destroy var_refs
tracing: Remove open-coding of hist trigger var_ref management
tracing: Use var_refs[] for hist trigger reference checking
tracing: Change strlen to sizeof for hist trigger static strings
tracing: Remove unnecessary hist trigger struct field
tracing: Fix ftrace_graph_get_ret_stack() to use task and not current
seq_buf: Use size_t for len in seq_buf_puts()
seq_buf: Make seq_buf_puts() null-terminate the buffer
arm64: Use ftrace_graph_get_ret_stack() instead of curr_ret_stack
...
Linus Torvalds [Mon, 31 Dec 2018 17:57:14 +0000 (09:57 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha architecture updates from Matt Turner:
"A few small changes for alpha as well as the new system call table
generation support from Firoz Khan"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: Remove some unused variables
alpha: rtc: simplify alpha_rtc_init
alpha: Fix a typo on ptrace.h
alpha: fix spelling mistake QSD_PORT_ACTUVE -> QSD_PORT_ACTIVE
alpha: generate uapi header and syscall table header files
alpha: add system call table generation support
alpha: add __NR_syscalls along with NR_SYSCALLS
alpha: remove CONFIG_OSF4_COMPAT flag from syscall table
alpha: move __IGNORE* entries to non uapi header
Linus Torvalds [Mon, 31 Dec 2018 17:54:17 +0000 (09:54 -0800)]
Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
"This is a revert for a lockup in cgroups-intense workloads - the real
fixes will come later"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix infinite loop in update_blocked_averages() by reverting 69f73c884db3
projects / kernel.git / log