Linus Torvalds [Thu, 27 May 2021 18:39:05 +0000 (08:39 -1000)]
Merge tag 'acpi-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a recent ACPI power management regression causing boot issues to
occur on some systems due to attempts to turn off ACPI power resources
that are already off (which should work according to the ACPI
specification)"
* tag 'acpi-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: power: Refine turning off unused power resources
Linus Torvalds [Thu, 27 May 2021 18:06:36 +0000 (08:06 -1000)]
Merge tag 'iommu-fixes-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Important fix for the AMD IOMMU driver in the recently added
page-specific invalidation code to fix a calculation.
- Fix a NULL-ptr dereference in the AMD IOMMU driver when a device
switches domain types.
- Fixes for the Intel VT-d driver to check for allocation failure and
do correct cleanup.
- Another fix for Intel VT-d to not allow supervisor page requests from
devices when using second level page translation.
- Add a MODULE_DEVICE_TABLE to the VIRTIO IOMMU driver
* tag 'iommu-fixes-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix sysfs leak in alloc_iommu()
iommu/vt-d: Use user privilege for RID2PASID translation
iommu/vt-d: Check for allocation failure in aux_detach_device()
iommu/virtio: Add missing MODULE_DEVICE_TABLE
iommu/amd: Fix wrong parentheses on page-specific invalidations
iommu/amd: Clear DMA ops when switching domain
Linus Torvalds [Thu, 27 May 2021 03:44:49 +0000 (17:44 -1000)]
Merge tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.13-rc4, including fixes from bpf, netfilter,
can and wireless trees. Notably including fixes for the recently
announced "FragAttacks" WiFi vulnerabilities. Rather large batch,
touching some core parts of the stack, too, but nothing hair-raising.
Current release - regressions:
- tipc: make node link identity publish thread safe
- dsa: felix: re-enable TAS guard band mode
- stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid()
- stmmac: fix system hang if change mac address after interface
ifdown
Current release - new code bugs:
- mptcp: avoid OOB access in setsockopt()
- bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers
- mac80211: do not accept/forward invalid EAPOL frames
- mptcp: avoid potential error message floods
- bpf, ringbuf: deny reserve of buffers larger than ringbuf to
prevent out of buffer writes
- bpf: forbid trampoline attach for functions with variable arguments
- bpf: add deny list of functions to prevent inf recursion of tracing
programs
- tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT
- can: isotp: prevent race between isotp_bind() and
isotp_setsockopt()
- netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check,
fallback to non-AVX2 version
Misc:
- bpf: add kconfig knob for disabling unpriv bpf by default"
* tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits)
net: phy: Document phydev::dev_flags bits allocation
mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
mptcp: avoid error message on infinite mapping
mptcp: drop unconditional pr_warn on bad opt
mptcp: avoid OOB access in setsockopt()
nfp: update maintainer and mailing list addresses
net: mvpp2: add buffer header handling in RX
bnx2x: Fix missing error code in bnx2x_iov_init_one()
net: zero-initialize tc skb extension on allocation
net: hns: Fix kernel-doc
sctp: fix the proc_handler for sysctl encap_port
sctp: add the missing setting for asoc encap_port
bpf, selftests: Adjust few selftest result_unpriv outcomes
bpf: No need to simulate speculative domain for immediates
bpf: Fix mask direction swap upon off reg sign change
bpf: Wrap aux data inside bpf_sanitize_info container
bpf: Fix BPF_LSM kconfig symbol dependency
selftests/bpf: Add test for l3 use of bpf_redirect_peer
bpftool: Add sock_release help info for cgroup attach/prog load command
net: dsa: microchip: enable phy errata workaround on 9567
...
Document the phydev::dev_flags bit allocation to allow bits 15:0 to
define PHY driver specific behavior, bits 23:16 to be reserved for now,
and bits 31:24 to hold generic PHY driver flags.
Davide Caratti [Tue, 25 May 2021 21:23:13 +0000 (14:23 -0700)]
mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer
when Linux receives an echo-ed ADD_ADDR, it checks the IP address against
the list of "announced" addresses. In case of a positive match, the timer
that handles retransmissions is stopped regardless of the 'Address Id' in
the received packet: this behaviour does not comply with RFC8684 3.4.1.
Fix it by validating the 'Address Id' in received echo-ed ADD_ADDRs.
Tested using packetdrill, with the following captured output:
unpatched kernel:
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 3013740213], length 0
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0xfd2e62517888fe29,mptcp dss ack 3007449509], length 0
In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 3013740213], length 0
^^^ retransmission is stopped here, but 'Address Id' is 90
patched kernel:
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 1.2.3.4,mptcp dss ack 1672384568], length 0
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 90 198.51.100.2,mptcp dss ack 1672384568], length 0
Out <...> Flags [.], ack 1, win 256, options [mptcp add-addr v1 id 1 198.51.100.2 hmac 0x1cf372d59e05f4b8,mptcp dss ack 3007449509], length 0
In <...> Flags [.], ack 1, win 257, options [mptcp add-addr v1-echo id 1 198.51.100.2,mptcp dss ack 1672384568], length 0
^^^ retransmission is stopped here, only when both 'Address Id' and 'IP Address' match
Fixes: bdcb4edaab8d ("mptcp: retransmit ADD_ADDR when timeout") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Tue, 25 May 2021 21:23:12 +0000 (14:23 -0700)]
mptcp: avoid error message on infinite mapping
Another left-over. Avoid flooding dmesg with useless text,
we already have a MIB for that event.
Fixes: 70105a1bbb51 ("mptcp: Implement MPTCP receive path") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Tue, 25 May 2021 21:23:11 +0000 (14:23 -0700)]
mptcp: drop unconditional pr_warn on bad opt
This is a left-over of early day. A malicious peer can flood
the kernel logs with useless messages, just drop it.
Fixes: 2c14519745b2 ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Tue, 25 May 2021 21:23:10 +0000 (14:23 -0700)]
mptcp: avoid OOB access in setsockopt()
We can't use tcp_set_congestion_control() on an mptcp socket, as
such function can end-up accessing a tcp-specific field -
prior_ssthresh - causing an OOB access.
To allow propagating the correct ca algo on subflow, cache the ca
name at initialization time.
Additionally avoid overriding the user-selected CA (if any) at
clone time.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/182 Fixes: 6ac9686a978f ("mptcp: sockopt: add TCP_CONGESTION and TCP_INFO") Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Tue, 25 May 2021 15:47:04 +0000 (17:47 +0200)]
nfp: update maintainer and mailing list addresses
Some of Netronome's activities and people have moved over to Corigine,
including NFP driver maintenance and myself.
Signed-off-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Chulski [Tue, 25 May 2021 16:04:41 +0000 (19:04 +0300)]
net: mvpp2: add buffer header handling in RX
If Link Partner sends frames larger than RX buffer size, MAC mark it
as oversize but still would pass it to the Packet Processor.
In this scenario, Packet Processor scatter frame between multiple buffers,
but only a single buffer would be returned to the Buffer Manager pool and
it would not refill the poll.
Patch add handling of oversize error with buffer header handling, so all
buffers would be returned to the Buffer Manager pool.
Fixes: decc8a74c68c ("ethernet: Add new driver for Marvell Armada 375 network unit") Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vlad Buslov [Tue, 25 May 2021 13:21:52 +0000 (16:21 +0300)]
net: zero-initialize tc skb extension on allocation
Function skb_ext_add() doesn't initialize created skb extension with any
value and leaves it up to the user. However, since extension of type
TC_SKB_EXT originally contained only single value tc_skb_ext->chain its
users used to just assign the chain value without setting whole extension
memory to zero first. This assumption changed when TC_SKB_EXT extension was
extended with additional fields but not all users were updated to
initialize the new fields which leads to use of uninitialized memory
afterwards. UBSAN log:
Fix the issue by providing new function tc_skb_ext_alloc() that allocates
tc skb extension and initializes its memory to 0 before returning it to the
caller. Change all existing users to use new API instead of calling
skb_ext_add() directly.
Fixes: e4f617a63f8d ("net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct") Fixes: 903b260bafc1 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Acked-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Li [Tue, 25 May 2021 10:52:47 +0000 (18:52 +0800)]
net: hns: Fix kernel-doc
Fix function name in hns_ethtool.c kernel-doc comment
to remove these warnings found by clang_w1.
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:202: warning: expecting
prototype for hns_nic_set_link_settings(). Prototype was for
hns_nic_set_link_ksettings() instead.
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:837: warning: expecting
prototype for get_ethtool_stats(). Prototype was for
hns_get_ethtool_stats() instead.
drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:894: warning:
expecting prototype for get_strings(). Prototype was for
hns_get_strings() instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 'commit ae347099a451 ("net: ethernet: hisilicon: hns: use phydev
from struct net_device")' Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 25 May 2021 02:49:42 +0000 (22:49 -0400)]
sctp: fix the proc_handler for sysctl encap_port
proc_dointvec() cannot do min and max check for setting a value
when extra1/extra2 is set, so change it to proc_dointvec_minmax()
for sysctl encap_port.
Fixes: 2ecd78d3dc7a ("sctp: add encap_port for netns sock asoc and transport") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Tue, 25 May 2021 02:49:24 +0000 (22:49 -0400)]
sctp: add the missing setting for asoc encap_port
This patch is to add the missing setting back for asoc encap_port.
Fixes: 283343abc37b ("sctp: add SCTP_REMOTE_UDP_ENCAPS_PORT sockopt") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Kees Cook [Tue, 25 May 2021 19:37:35 +0000 (12:37 -0700)]
proc: Check /proc/$pid/attr/ writes against file opener
Fix another "confused deputy" weakness[1]. Writes to /proc/$pid/attr/
files need to check the opener credentials, since these fds do not
transition state across execve(). Without this, it is possible to
trick another process (which may have different credentials) to write
to its own /proc/$pid/attr/ files, leading to unexpected and possibly
exploitable behaviors.
Daniel Borkmann [Tue, 4 May 2021 08:58:25 +0000 (08:58 +0000)]
bpf, selftests: Adjust few selftest result_unpriv outcomes
Given we don't need to simulate the speculative domain for registers with
immediates anymore since the verifier uses direct imm-based rewrites instead
of having to mask, we can also lift a few cases that were previously rejected.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Tue, 4 May 2021 08:58:25 +0000 (08:58 +0000)]
bpf: No need to simulate speculative domain for immediates
In 52336fa0dc06 ("bpf: Fix leakage of uninitialized bpf stack under
speculation") we replaced masking logic with direct loads of immediates
if the register is a known constant. Given in this case we do not apply
any masking, there is also no reason for the operation to be truncated
under the speculative domain.
Therefore, there is also zero reason for the verifier to branch-off and
simulate this case, it only needs to do it for unknown but bounded scalars.
As a side-effect, this also enables few test cases that were previously
rejected due to simulation under zero truncation.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 21 May 2021 10:19:22 +0000 (10:19 +0000)]
bpf: Fix mask direction swap upon off reg sign change
Masking direction as indicated via mask_to_left is considered to be
calculated once and then used to derive pointer limits. Thus, this
needs to be placed into bpf_sanitize_info instead so we can pass it
to sanitize_ptr_alu() call after the pointer move. Piotr noticed a
corner case where the off reg causes masking direction change which
then results in an incorrect final aux->alu_limit.
Fixes: fa685a28cdec ("bpf: Tighten speculative pointer arithmetic mask") Reported-by: Piotr Krysiuk <piotras@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Fri, 21 May 2021 10:17:36 +0000 (10:17 +0000)]
bpf: Wrap aux data inside bpf_sanitize_info container
Add a container structure struct bpf_sanitize_info which holds
the current aux info, and update call-sites to sanitize_ptr_alu()
to pass it in. This is needed for passing in additional state
later on.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Piotr Krysiuk <piotras@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Tue, 25 May 2021 18:35:29 +0000 (20:35 +0200)]
bpf: Fix BPF_LSM kconfig symbol dependency
Similarly as 7f144c40c3ae ("bpf: Fix BPF_JIT kconfig symbol dependency") we
need to detangle the hard BPF_LSM dependency on NET. This was previously
implicit by its dependency on BPF_JIT which itself was dependent on NET (but
without any actual/real hard dependency code-wise). Given the latter was
lifted, so should be the former as BPF_LSMs could well exist on net-less
systems. This therefore also fixes a randconfig build error recently reported
by Randy:
ld: kernel/bpf/bpf_lsm.o: in function `bpf_lsm_func_proto':
bpf_lsm.c:(.text+0x1a0): undefined reference to `bpf_sk_storage_get_proto'
ld: bpf_lsm.c:(.text+0x1b8): undefined reference to `bpf_sk_storage_delete_proto'
[...]
Fixes: d3aa74e57244 ("bpf, kconfig: Add consolidated menu entry for bpf with core options") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org>
Linus Torvalds [Tue, 25 May 2021 17:31:49 +0000 (07:31 -1000)]
Merge tag 'netfs-lib-fixes-20200525' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfs fixes from David Howells:
"A couple of fixes to the new netfs lib:
- Pass the AOP flags through from netfs_write_begin() into
grab_cache_page_write_begin().
- Automatically enable in Kconfig netfs lib rather than presenting an
option for manual enablement"
* tag 'netfs-lib-fixes-20200525' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Make CONFIG_NETFS_SUPPORT auto-selected rather than manual
netfs: Pass flags through to grab_cache_page_write_begin()
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple
warnings by explicitly adding multiple fallthrough pseudo-keywords in
places where the code is intended to fall through to the next case.
Jussi Maki [Tue, 25 May 2021 10:29:55 +0000 (10:29 +0000)]
selftests/bpf: Add test for l3 use of bpf_redirect_peer
Add a test case for using bpf_skb_change_head() in combination with
bpf_redirect_peer() to redirect a packet from a L3 device to veth and back.
The test uses a BPF program that adds L2 headers to the packet coming
from a L3 device and then calls bpf_redirect_peer() to redirect the packet
to a veth device. The test fails as skb->mac_len is not set properly and
thus the ethernet headers are not properly skb_pull'd in cls_bpf_classify(),
causing tcp_v4_rcv() to point the TCP header into middle of the IP header.
Liu Jian [Tue, 25 May 2021 01:41:39 +0000 (09:41 +0800)]
bpftool: Add sock_release help info for cgroup attach/prog load command
The help information was not added at the time when the function got added.
Fix this and add the missing information to its cli, documentation and bash
completion.
Fixes: fe86e80eba72 ("bpftool: Add support for BPF_CGROUP_INET_SOCK_RELEASE") Signed-off-by: Liu Jian <liujian56@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20210525014139.323859-1-liujian56@huawei.com
Linus Torvalds [Tue, 25 May 2021 02:03:24 +0000 (16:03 -1000)]
Merge tag 'perf-tools-fixes-for-v5.13-2021-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tool fixes from Arnaldo Carvalho de Melo:
- Fix 'perf script' decoding of Intel PT traces for abort handling and
sample instruction bytes.
- Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-Exit to Intel PT
'perf script' decoder.
- Fixes for the python based Intel PT trace viewer GUI.
- Sync UAPI copies (unwire quotactl_path, some comment fixes).
- Fix handling of missing kernel software events, such as the recently
added 'cgroup-switches', and add the trivial glue for it in the
tooling side, since it was added in this merge window.
- Add missing initialization of zstd_data in 'perf buildid-list',
detected with valgrind's memcheck.
- Remove needless event enable/disable when all events uses BPF.
- Fix libpfm4 support (63) test error for nested event groups.
* tag 'perf-tools-fixes-for-v5.13-2021-05-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf stat: Skip evlist__[enable|disable] when all events uses BPF
perf script: Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-Exit
perf scripts python: exported-sql-viewer.py: Fix warning display
perf scripts python: exported-sql-viewer.py: Fix Array TypeError
perf scripts python: exported-sql-viewer.py: Fix copy to clipboard from Top Calls by elapsed Time report
tools headers UAPI: Sync files changed by the quotactl_path unwiring
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
tools headers UAPI: Sync linux/fs.h with the kernel sources
perf parse-events: Check if the software events array slots are populated
perf tools: Add 'cgroup-switches' software event
perf intel-pt: Remove redundant setting of ptq->insn_len
perf intel-pt: Fix sample instruction bytes
perf intel-pt: Fix transaction abort handling
perf test: Fix libpfm4 support (63) test error for nested event groups
tools arch kvm: Sync kvm headers with the kernel sources
perf buildid-list: Initialize zstd_data
net: dsa: microchip: enable phy errata workaround on 9567
Also enable phy errata workaround on 9567 since has the same errata as
the 9477 according to the manufacture's documentation.
Signed-off-by: George McCollister <george.mccollister@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: 1f4fa502fc00 ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver") Cc: stable@kernel.vger.org Reported-and-tested-by: syzbot+b558506ba8165425fee2@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Commit acde5a9ed9ba ("net: hsr: check skb can contain struct hsr_ethhdr
in fill_frame_info") added the following which resulted in -EINVAL
always being returned:
if (skb->mac_len < sizeof(struct hsr_ethhdr))
return -EINVAL;
mac_len was not being set correctly so this check completely broke
HSR/PRP since it was always 14, not 20.
Set mac_len correctly and modify the mac_len checks to test in the
correct places since sometimes it is legitimately 14.
Fixes: acde5a9ed9ba ("net: hsr: check skb can contain struct hsr_ethhdr in fill_frame_info") Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: appletalk: cops: Fix data race in cops_probe1
In cops_probe1(), there is a write to dev->base_addr after requesting an
interrupt line and registering the interrupt handler cops_interrupt().
The handler might be called in parallel to handle an interrupt.
cops_interrupt() tries to read dev->base_addr leading to a potential
data race. So write to dev->base_addr before calling request_irq().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Saubhik Mukherjee <saubhik.mukherjee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 24 May 2021 20:20:24 +0000 (13:20 -0700)]
Merge branch 'sja1105-fixes'
Vladimir Oltean says:
====================
Fixes for SJA1105 DSA driver
This series contains some minor fixes in the sja1105 driver:
- improved error handling in the probe path
- rejecting an invalid phy-mode specified in the device tree
- register access fix for SJA1105P/Q/R/S for the virtual links through
the dynamic reconfiguration interface
- handling 2 bridge VLANs where the second is supposed to overwrite the
first
- making sure that the lack of a pvid results in the actual dropping of
untagged traffic
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 24 May 2021 09:25:27 +0000 (12:25 +0300)]
net: dsa: sja1105: update existing VLANs from the bridge VLAN list
When running this sequence of operations:
ip link add br0 type bridge vlan_filtering 1
ip link set swp4 master br0
bridge vlan add dev swp4 vid 1
We observe the traffic sent on swp4 is still untagged, even though the
bridge has overwritten the existing VLAN entry:
port vlan ids
swp4 1 PVID
br0 1 PVID Egress Untagged
This happens because we didn't consider that the 'bridge vlan add'
command just overwrites VLANs like it's nothing. We treat the 'vid 1
pvid untagged' and the 'vid 1' as two separate VLANs, and the first
still has precedence when calling sja1105_build_vlan_table. Obviously
there is a disagreement regarding semantics, and we end up doing
something unexpected from the PoV of the bridge.
Let's actually consider an "existing VLAN" to be one which is on the
same port, and has the same VLAN ID, as one we already have, and update
it if it has different flags than we do.
The first blamed commit is the one introducing the bug, the second one
is the latest on top of which the bugfix still applies.
Fixes: bf0171d38a71 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Fixes: 48b7c09d85c4 ("net: dsa: tag_8021q: add a context structure") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 24 May 2021 09:25:26 +0000 (12:25 +0300)]
net: dsa: sja1105: use 4095 as the private VLAN for untagged traffic
One thing became visible when writing the blamed commit, and that was
that STP and PTP frames injected by net/dsa/tag_sja1105.c using the
deferred xmit mechanism are always classified to the pvid of the CPU
port, regardless of whatever VLAN there might be in these packets.
So a decision needed to be taken regarding the mechanism through which
we should ensure that delivery of STP and PTP traffic is possible when
we are in a VLAN awareness mode that involves tag_8021q. This is because
tag_8021q is not concerned with managing the pvid of the CPU port, since
as far as tag_8021q is concerned, no traffic should be sent as untagged
from the CPU port. So we end up not actually having a pvid on the CPU
port if we only listen to tag_8021q, and unless we do something about it.
The decision taken at the time was to keep VLAN 1 in the list of
priv->dsa_8021q_vlans, and make it a pvid of the CPU port. This ensures
that STP and PTP frames can always be sent to the outside world.
However there is a problem. If we do the following while we are in
the best_effort_vlan_filtering=true mode:
ip link add br0 type bridge vlan_filtering 1
ip link set swp2 master br0
bridge vlan del dev swp2 vid 1
Then untagged and pvid-tagged frames should be dropped. But we observe
that they aren't, and this is because of the precaution we took that VID
1 is always installed on all ports.
So clearly VLAN 1 is not good for this purpose. What about VLAN 0?
Well, VLAN 0 is managed by the 8021q module, and that module wants to
ensure that 802.1p tagged frames are always received by a port, and are
always transmitted as VLAN-tagged (with VLAN ID 0). Whereas we want our
STP and PTP frames to be untagged if the stack sent them as untagged -
we don't want the driver to just decide out of the blue that it adds
VID 0 to some packets.
So what to do?
Well, there is one other VLAN that is reserved, and that is 4095:
$ ip link add link swp2 name swp2.4095 type vlan id 4095
Error: 8021q: Invalid VLAN id.
$ bridge vlan add dev swp2 vid 4095
Error: bridge: Vlan id is invalid.
After we made this change, VLAN 1 is indeed forwarded and/or dropped
according to the bridge VLAN table, there are no further alterations
done by the sja1105 driver.
Fixes: bf0171d38a71 ("net: dsa: sja1105: save/restore VLANs using a delta commit method") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 24 May 2021 09:25:25 +0000 (12:25 +0300)]
net: dsa: sja1105: error out on unsupported PHY mode
The driver continues probing when a port is configured for an
unsupported PHY interface type, instead it should stop.
Fixes: d6439dcd9177 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 24 May 2021 09:25:24 +0000 (12:25 +0300)]
net: dsa: sja1105: add error handling in sja1105_setup()
If any of sja1105_static_config_load(), sja1105_clocking_setup() or
sja1105_devlink_setup() fails, we can't just return in the middle of
sja1105_setup() or memory will leak. Add a cleanup path.
Fixes: 7e0f84434f45 ("net: dsa: sja1105: move devlink param code to sja1105_devlink.c") Fixes: d6439dcd9177 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Mon, 24 May 2021 09:25:23 +0000 (12:25 +0300)]
net: dsa: sja1105: call dsa_unregister_switch when allocating memory fails
Unlike other drivers which pretty much end their .probe() execution with
dsa_register_switch(), the sja1105 does some extra stuff. When that
fails with -ENOMEM, the driver is quick to return that, forgetting to
call dsa_unregister_switch(). Not critical, but a bug nonetheless.
Fixes: 672aeccd6f63 ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Fixes: 8efe3eff501b ("net: dsa: Make deferred_xmit private to sja1105") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
So in order to pack/unpack the command bits into the buffer,
sja1105_vl_lookup_cmd_packing must first advance the buffer pointer by
the length of the entry. This is similar to what the other *cmd_packing
functions do.
This bug exists because the command packing function for P/Q/R/S was
copied from the E/T generation, and on E/T, the command was actually
embedded within the entry buffer itself.
Fixes: 7bedc7650e7d ("net: dsa: sja1105: add static tables for virtual links") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Mon, 24 May 2021 09:25:11 +0000 (11:25 +0200)]
net: hso: fix control-request directions
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Fix the tiocmset and rfkill requests which erroneously used
usb_rcvctrlpipe().
Fixes: a3f20b1d831b ("HSO: add option hso driver") Cc: stable@vger.kernel.org # 2.6.27 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang [Mon, 24 May 2021 06:49:42 +0000 (14:49 +0800)]
r8152: check the informaton of the device
Verify some fields of the USB descriptor to make sure the driver
could be used by the device.
Besides, remove the check of endpoint number in rtl8152_probe().
usb_find_common_endpoints() includes it.
BugLink: https://syzkaller.appspot.com/bug?id=912c9c373656996801b4de61f1e3cb326fe940aa Reported-by: syzbot+95afd23673f5dd295c57@syzkaller.appspotmail.com Fixes: 87ca94975e4b ("r8152: search the configuration of vendor mode") Signed-off-by: Hayes Wang <hayeswang@realtek.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Sun, 23 May 2021 14:38:53 +0000 (14:38 +0000)]
sch_dsmark: fix a NULL deref in qdisc_reset()
If Qdisc_ops->init() is failed, Qdisc_ops->reset() would be called.
When dsmark_init(Qdisc_ops->init()) is failed, it possibly doesn't
initialize dsmark_qdisc_data->q. But dsmark_reset(Qdisc_ops->reset())
uses dsmark_qdisc_data->q pointer wihtout any null checking.
So, panic would occur.
Test commands:
sysctl net.core.default_qdisc=dsmark -w
ip link add dummy0 type dummy
ip link add vw0 link dummy0 type virt_wifi
ip link set vw0 up
Linus Torvalds [Mon, 24 May 2021 17:22:41 +0000 (07:22 -1000)]
Merge tag 'spi-fix-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's some device specific fixes here but also an unusually large
number of fixes for the core, including both fixes for breakage
introduced on ACPI systems while fixing the long standing confusion
about the polarity of GPIO chip selects specified through DT, and
fixes for ordering issues on unregistration which have been exposed
through the wider usage of devm_."
* tag 'spi-fix-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sc18is602: implement .max_{transfer,message}_size() for the controller
spi: sc18is602: don't consider the chip select byte in sc18is602_check_transfer
MAINTAINERS: Add Alain Volmat as STM32 SPI maintainer
dt-bindings: spi: spi-mux: rename flash node
spi: Don't have controller clean up spi device before driver unbind
spi: Assume GPIO CS active high in ACPI case
spi: sprd: Add missing MODULE_DEVICE_TABLE
spi: Switch to signed types for *_native_cs SPI controller fields
spi: take the SPI IO-mutex in the spi_set_cs_timing method
spi: spi-fsl-dspi: Fix a resource leak in an error handling path
spi: spi-zynq-qspi: Fix stack violation bug
spi: spi-zynq-qspi: Fix kernel-doc warning
spi: altera: Make SPI_ALTERA_CORE invisible
spi: Fix spi device unregister flow
Zhen Lei [Mon, 24 May 2021 08:29:43 +0000 (16:29 +0800)]
cgroup: fix spelling mistakes
Fix some spelling mistakes in comments:
hierarhcy ==> hierarchy
automtically ==> automatically
overriden ==> overridden
In absense of .. or ==> In absence of .. and
assocaited ==> associated
taget ==> target
initate ==> initiate
succeded ==> succeeded
curremt ==> current
udpated ==> updated
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Tejun Heo <tj@kernel.org>
ACPI: power: Refine turning off unused power resources
Commit 8f4d7aafe632 ("ACPI: power: Turn off unused power resources
unconditionally") dropped the power resource state check from
acpi_turn_off_unused_power_resources(), because according to the
ACPI specification (e.g. ACPI 6.4, Section 7.2.2) the OS "may run
the _OFF method repeatedly, even if the resource is already off".
However, it turns out that some systems do not follow the
specification in this particular respect and that commit introduced
boot issues on them, so refine acpi_turn_off_unused_power_resources()
to only turn off power resources without any users after device
enumeration and restore its previous behavior in the system-wide
resume path.
NFC: nfcmrvl: fix kernel-doc syntax in file headers
The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for drivers/nfc/nfcmrvl follows this syntax, but the content
inside does not comply with kernel-doc.
This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc.
For e.g., running scripts/kernel-doc -none on drivers/nfc/nfcmrvl/spi.c
causes warning:
warning: expecting prototype for Marvell NFC(). Prototype was for SPI_WAIT_HANDSHAKE() instead
Provide a simple fix by replacing such occurrences with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
DENG Qingfang [Sun, 23 May 2021 14:51:54 +0000 (22:51 +0800)]
net: dsa: mt7530: fix VLAN traffic leaks
PCR_MATRIX field was set to all 1's when VLAN filtering is enabled, but
was not reset when it is disabled, which may cause traffic leaks:
ip link add br0 type bridge vlan_filtering 1
ip link add br1 type bridge vlan_filtering 1
ip link set swp0 master br0
ip link set swp1 master br1
ip link set br0 type bridge vlan_filtering 0
ip link set br1 type bridge vlan_filtering 0
# traffic in br0 and br1 will start leaking to each other
As port_bridge_{add,del} have set up PCR_MATRIX properly, remove the
PCR_MATRIX write from mt7530_port_set_vlan_aware.
Fixes: aaf9e358e672 ("net: dsa: mediatek: add VLAN support for MT7530") Signed-off-by: DENG Qingfang <dqfext@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 24 May 2021 00:16:09 +0000 (17:16 -0700)]
Merge branch 'fq_pie-fixes'
Davide Caratti says:
====================
two fixes for the fq_pie scheduler
- patch 1/2 restores the possibility to use 65536 flows with fq_pie,
preserving the fix for an endless loop in the control plane
- patch 2/2 fixes an OOB access that can be observed in the traffic
path of fq_pie scheduler, when the classification selects a flow
beyond the allocated space.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Memory state around the buggy address: ffff888171306800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff888171306880: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
>ffff888171306900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^ ffff888171306980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff888171306a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fix fq_pie traffic path to avoid selecting 'q->flows + q->flows_cnt' as a
valid flow: it's an address beyond the allocated memory.
Fixes: 614b84da5c15 ("net: sched: add Flow Queue PIE packet scheduler") CC: stable@vger.kernel.org Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Sat, 22 May 2021 13:14:45 +0000 (15:14 +0200)]
net/sched: fq_pie: re-factor fix for fq_pie endless loop
the patch that fixed an endless loop in_fq_pie_init() was not considering
that 65535 is a valid class id. The correct bugfix for this infinite loop
is to change 'idx' to become an u32, like Colin proposed in the past [1].
Fix this as follows:
- restore 65536 as maximum possible values of 'flows_cnt'
- use u32 'idx' when iterating on 'q->flows'
- fix the TDC selftest
CC: Colin Ian King <colin.king@canonical.com> CC: stable@vger.kernel.org Fixes: d17f5f1e9ca0 ("net/sched: fix infinite loop in sch_fq_pie") Fixes: 614b84da5c15 ("net: sched: add Flow Queue PIE packet scheduler") Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Zong Li [Sat, 22 May 2021 09:16:11 +0000 (17:16 +0800)]
net: macb: ensure the device is available before accessing GEMGXL control registers
If runtime power menagement is enabled, the gigabit ethernet PLL would
be disabled after macb_probe(). During this period of time, the system
would hang up if we try to access GEMGXL control registers.
We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of
sleep inside atomic section (74f79195a4d06cf9 ("sh_eth: Fix sleeping
function called from invalid context"). Add netif_running checking to
ensure the device is available before accessing GEMGXL device.
Changed in v2:
- Use netif_running instead of its own flag
Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Roese [Sat, 22 May 2021 07:56:30 +0000 (09:56 +0200)]
net: ethernet: mtk_eth_soc: Fix packet statistics support for MT7628/88
The MT7628/88 SoC(s) have other (limited) packet counter registers than
currently supported in the mtk_eth_soc driver. This patch adds support
for reading these registers, so that the packet statistics are correctly
updated.
Additionally the defines for the non-MT7628 variant packet counter
registers are added and used in this patch instead of using hard coded
values.
Signed-off-by: Stefan Roese <sr@denx.de> Fixes: 0307026ae73a ("net: ethernet: mediatek: Add MT7628/88 SoC support") Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Reto Schneider <code@reto-schneider.ch> Cc: Reto Schneider <reto.schneider@husqvarnagroup.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
MAINTAINERS: Add entries for CBS, ETF and taprio qdiscs
Add Vinicius Costa Gomes as maintainer for these qdiscs.
These qdiscs are all TSN (Time Sensitive Networking) related.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 23 May 2021 16:32:40 +0000 (06:32 -1000)]
Merge tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Two perf fixes:
- Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as
this can cause malfunction when TOS is not supported
- Allocate the LBR XSAVE buffers along with the DS buffers upfront
because allocating them when adding an event can deadlock"
* tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context
perf/x86: Avoid touching LBR_TOS MSR for Arch LBR
Linus Torvalds [Sun, 23 May 2021 16:30:08 +0000 (06:30 -1000)]
Merge tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two locking fixes:
- Invoke the lockdep tracepoints in the correct place so the ordering
is correct again
- Don't leave the mutex WAITER bit stale when the last waiter is
dropping out early due to a signal as that forces all subsequent
lock operations needlessly into the slowpath until it's cleaned up
again"
* tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal
locking/lockdep: Correct calling tracepoints
Linus Torvalds [Sun, 23 May 2021 16:28:20 +0000 (06:28 -1000)]
Merge tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A few fixes for irqchip drivers:
- Allocate interrupt descriptors correctly on Mainstone PXA when
SPARSE_IRQ is enabled; otherwise the interrupt association fails
- Make the APPLE AIC chip driver depend on APPLE
- Remove redundant error output on devm_ioremap_resource() failure"
* tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Remove redundant error printing
irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
ARM: PXA: Fix cplds irqdesc allocation when using legacy mode
Linus Torvalds [Sun, 23 May 2021 16:12:25 +0000 (06:12 -1000)]
Merge tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix how SEV handles MMIO accesses by forwarding potential page faults
instead of killing the machine and by using the accessors with the
exact functionality needed when accessing memory.
- Fix a confusion with Clang LTO compiler switches passed to the it
- Handle the case gracefully when VMGEXIT has been executed in
userspace
* tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev-es: Use __put_user()/__get_user() for data accesses
x86/sev-es: Forward page-faults which happen during emulation
x86/sev-es: Don't return NULL from sev_es_get_ghcb()
x86/build: Fix location of '-plugin-opt=' flags
x86/sev-es: Invalidate the GHCB after completing VMGEXIT
x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch
Linus Torvalds [Sun, 23 May 2021 16:07:33 +0000 (06:07 -1000)]
Merge tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix breakage of strace (and other ptracers etc.) when using the new
scv ABI (Power9 or later with glibc >= 2.33).
- Fix early_ioremap() on 64-bit, which broke booting on some machines.
Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and
Christophe Leroy.
* tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls
powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls
powerpc: Fix early setup to make early_ioremap() work
Linus Torvalds [Sun, 23 May 2021 01:20:20 +0000 (15:20 -1000)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"10 patches.
Subsystems affected by this patch series: mm (pagealloc, gup, kasan,
and userfaultfd), ipc, selftests, watchdog, bitmap, procfs, and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
userfaultfd: hugetlbfs: fix new flag usage in error path
lib: kunit: suppress a compilation warning of frame size
proc: remove Alexey from MAINTAINERS
linux/bits.h: fix compilation error with GENMASK
watchdog: reliable handling of timestamps
kasan: slab: always reset the tag in get_freepointer_safe()
tools/testing/selftests/exec: fix link error
ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry
Revert "mm/gup: check page posion status for coredump."
mm/shuffle: fix section mismatch warning
Mike Kravetz [Sun, 23 May 2021 00:42:11 +0000 (17:42 -0700)]
userfaultfd: hugetlbfs: fix new flag usage in error path
In commit f667fc083633 ("hugetlb: use page.private for hugetlb specific
page flags") the use of PagePrivate to indicate a reservation count
should be restored at free time was changed to the hugetlb specific flag
HPageRestoreReserve. Changes to a userfaultfd error path as well as a
VM_BUG_ON() in remove_inode_hugepages() were overlooked.
Users could see incorrect hugetlb reserve counts if they experience an
error with a UFFDIO_COPY operation. Specifically, this would be the
result of an unlikely copy_huge_page_from_user error. There is not an
increased chance of hitting the VM_BUG_ON.
Link: https://lkml.kernel.org/r/20210521233952.236434-1-mike.kravetz@oracle.com Fixes: f667fc083633 ("hugetlb: use page.private for hugetlb specific page flags") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mina Almasry <almasry.mina@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mina Almasry <almasrymina@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhen Lei [Sun, 23 May 2021 00:42:08 +0000 (17:42 -0700)]
lib: kunit: suppress a compilation warning of frame size
lib/bitfield_kunit.c: In function `test_bitfields_constants':
lib/bitfield_kunit.c:93:1: warning: the frame size of 7456 bytes is larger than 2048 bytes [-Wframe-larger-than=]
}
^
As the description of BITFIELD_KUNIT in lib/Kconfig.debug, it "Only useful
for kernel devs running the KUnit test harness, and not intended for
inclusion into a production build". Therefore, it is not worth modifying
variable 'test_bitfields_constants' to clear this warning. Just suppress
it.
Rikard Falkeborn [Sun, 23 May 2021 00:42:02 +0000 (17:42 -0700)]
linux/bits.h: fix compilation error with GENMASK
GENMASK() has an input check which uses __builtin_choose_expr() to
enable a compile time sanity check of its inputs if they are known at
compile time.
However, it turns out that __builtin_constant_p() does not always return
a compile time constant [0]. It was thought this problem was fixed with
gcc 4.9 [1], but apparently this is not the case [2].
Switch to use __is_constexpr() instead which always returns a compile time
constant, regardless of its inputs.
Petr Mladek [Sun, 23 May 2021 00:41:59 +0000 (17:41 -0700)]
watchdog: reliable handling of timestamps
Commit f0b5eaf1388b ("watchdog: cleanup handling of false positives")
tried to handle a virtual host stopped by the host a more
straightforward and cleaner way.
But it introduced a risk of false softlockup reports. The virtual host
might be stopped at any time, for example between
kvm_check_and_clear_guest_paused() and is_softlockup(). As a result,
is_softlockup() might read the updated jiffies and detects a softlockup.
A solution might be to put back kvm_check_and_clear_guest_paused() after
is_softlockup() and detect it. But it would put back the cycle that
complicates the logic.
In fact, the handling of all the timestamps is not reliable. The code
does not guarantee when and how many times the timestamps are read. For
example, "period_ts" might be touched anytime also from NMI and re-read in
is_softlockup(). It works just by chance.
Fix all the problems by making the code even more explicit.
1. Make sure that "now" and "period_ts" timestamps are read only once.
They might be changed at anytime by NMI or when the virtual guest is
stopped by the host. Note that "now" timestamp does this implicitly
because "jiffies" is marked volatile.
2. "now" time must be read first. The state of "period_ts" will
decide whether it will be used or the period will get restarted.
3. kvm_check_and_clear_guest_paused() must be called before reading
"period_ts". It touches the variable when the guest was stopped.
As a result, "now" timestamp is used only when the watchdog was not
touched and the guest not stopped in the meantime. "period_ts" is
restarted in all other situations.
Link: https://lkml.kernel.org/r/YKT55gw+RZfyoFf7@alley Fixes: f0b5eaf1388b79f7384814 ("watchdog: cleanup handling of false positives") Signed-off-by: Petr Mladek <pmladek@suse.com> Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yang Yingliang [Sun, 23 May 2021 00:41:53 +0000 (17:41 -0700)]
tools/testing/selftests/exec: fix link error
Fix the link error by adding '-static':
gcc -Wall -Wl,-z,max-page-size=0x1000 -pie load_address.c -o /home/yang/linux/tools/testing/selftests/exec/load_address_4096
/usr/bin/ld: /tmp/ccopEGun.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `stderr@@GLIBC_2.17' which may bind externally can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: /tmp/ccopEGun.o(.text+0x158): unresolvable R_AARCH64_ADR_PREL_PG_HI21 relocation against symbol `stderr@@GLIBC_2.17'
/usr/bin/ld: final link failed: bad value
collect2: error: ld returned 1 exit status
make: *** [Makefile:25: tools/testing/selftests/exec/load_address_4096] Error 1
Link: https://lkml.kernel.org/r/20210514092422.2367367-1-yangyingliang@huawei.com Fixes: a8aaabc51348 ("tools/testing/selftests: add self-test for verifying load alignment") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Cc: Chris Kennelly <ckennelly@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Varad Gautam [Sun, 23 May 2021 00:41:49 +0000 (17:41 -0700)]
ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry
do_mq_timedreceive calls wq_sleep with a stack local address. The
sender (do_mq_timedsend) uses this address to later call pipelined_send.
This leads to a very hard to trigger race where a do_mq_timedreceive
call might return and leave do_mq_timedsend to rely on an invalid
address, causing the following crash:
1. do_mq_timedreceive calls wq_sleep with the address of `struct
ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it
holds a valid `struct ext_wait_queue *` as long as the stack has not
been overwritten.
2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and
do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call
__pipelined_op.
3. Sender calls __pipelined_op::smp_store_release(&this->state,
STATE_READY). Here is where the race window begins. (`this` is
`ewq_addr`.)
4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it
will see `state == STATE_READY` and break.
5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed
to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's
stack. (Although the address may not get overwritten until another
function happens to touch it, which means it can persist around for an
indefinite time.)
6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a
`struct ext_wait_queue *`, and uses it to find a task_struct to pass to
the wake_q_add_safe call. In the lucky case where nothing has
overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct.
In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a
bogus address as the receiver's task_struct causing the crash.
do_mq_timedsend::__pipelined_op() should not dereference `this` after
setting STATE_READY, as the receiver counterpart is now free to return.
Change __pipelined_op to call wake_q_add_safe on the receiver's
task_struct returned by get_task_struct, instead of dereferencing `this`
which sits on the receiver's stack.
As Manfred pointed out, the race potentially also exists in
ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare. Fix
those in the same way.
Link: https://lkml.kernel.org/r/20210510102950.12551-1-varad.gautam@suse.com Fixes: cf43efb7049ccb ("ipc/mqueue.c: update/document memory barriers") Fixes: bdd791370103c4 ("ipc/sem.c: document and update memory barriers") Fixes: 1778dd1c747cc2 ("ipc/msg.c: update and document memory barriers") Signed-off-by: Varad Gautam <varad.gautam@suse.com> Reported-by: Matthias von Faber <matthias.vonfaber@aox-tech.de> Acked-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Manfred Spraul <manfred@colorfullife.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Sun, 23 May 2021 00:41:46 +0000 (17:41 -0700)]
Revert "mm/gup: check page posion status for coredump."
While reviewing [1] I came across commit 88629ba9446f ("mm/gup: check
page posion status for coredump.") and noticed that this patch is broken
in two ways. First it doesn't really prevent hwpoison pages from being
dumped because hwpoison pages can be marked asynchornously at any time
after the check. Secondly, and more importantly, the patch introduces a
ref count leak because get_dump_page takes a reference on the page which
is not released.
It also seems that the patch was merged incorrectly because there were
follow up changes not included as well as discussions on how to address
the underlying problem [2]
Arnd Bergmann [Sun, 23 May 2021 00:41:43 +0000 (17:41 -0700)]
mm/shuffle: fix section mismatch warning
clang sometimes decides not to inline shuffle_zone(), but it calls a
__meminit function. Without the extra __meminit annotation we get this
warning:
WARNING: modpost: vmlinux.o(.text+0x2a86d4): Section mismatch in reference from the function shuffle_zone() to the function .meminit.text:__shuffle_zone()
The function shuffle_zone() references
the function __meminit __shuffle_zone().
This is often because shuffle_zone lacks a __meminit
annotation or the annotation of __shuffle_zone is wrong.
shuffle_free_memory() did not show the same problem in my tests, but it
could happen in theory as well, so mark both as __meminit.
Link: https://lkml.kernel.org/r/20210514135952.2928094-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tag 'block-5.13-2021-05-22' of git://git.kernel.dk/linux-block:
block: fix a race between del_gendisk and BLKRRPART
block: prevent block device lookups at the beginning of del_gendisk
nvme-fc: clear q_live at beginning of association teardown
nvme-tcp: rerun io_work if req_list is not empty
nvme-tcp: fix possible use-after-completion
nvme-loop: fix memory leak in nvme_loop_create_ctrl()
nvmet: fix memory leak in nvmet_alloc_ctrl()
Linus Torvalds [Sat, 22 May 2021 17:33:09 +0000 (07:33 -1000)]
Merge tag 'for-linus-5.13b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a fix for a boot regression when running as PV guest on hardware
without NX support
- a small series fixing a bug in the Xen pciback driver when
configuring a PCI card with multiple virtual functions
* tag 'for-linus-5.13b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-pciback: reconfigure also from backend watch handler
xen-pciback: redo VF placement in the virtual topology
x86/Xen: swap NX determination and GDT setup on BSP
Linus Torvalds [Fri, 21 May 2021 23:24:12 +0000 (13:24 -1000)]
Merge tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes:
- fix unaligned compressed writes in zoned mode
- fix false positive lockdep warning when cloning inline extent
- remove wrong BUG_ON in tree-log error handling"
* tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix parallel compressed writes
btrfs: zoned: pass start block to btrfs_use_zone_append
btrfs: do not BUG_ON in link_to_fixup_dir
btrfs: release path before starting transaction when cloning inline extent
Linus Torvalds [Fri, 21 May 2021 23:12:51 +0000 (13:12 -1000)]
Merge tag '5.13-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Seven smb3 fixes: one for stable, three others fix problems found in
testing handle leases, and a compounded request fix"
* tag '5.13-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6:
Fix KASAN identified use-after-free issue.
Defer close only when lease is enabled.
Fix kernel oops when CONFIG_DEBUG_ATOMIC_SLEEP is enabled.
cifs: Fix inconsistent indenting
cifs: fix memory leak in smb2_copychunk_range
SMB3: incorrect file id in requests compounded with open
cifs: remove deadstore in cifs_close_all_deferred_files()
ipv6: record frag_max_size in atomic fragments in input path
Commit dff483bc8459 ("ipv6: on reassembly, record frag_max_size")
filled the frag_max_size field in IP6CB in the input path.
The field should also be filled in case of atomic fragments.
Fixes: dff483bc8459 ('ipv6: on reassembly, record frag_max_size') Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Íñigo Huguet [Fri, 21 May 2021 14:38:35 +0000 (16:38 +0200)]
net:sfc: fix non-freed irq in legacy irq mode
SFC driver can be configured via modparam to work using MSI-X, MSI or
legacy IRQ interrupts. In the last one, the interrupt was not properly
released on module remove.
It was not freed because the flag irqs_hooked was not set during
initialization in the case of using legacy IRQ.
Example of (trimmed) trace during module remove without this fix:
Rao Shoaib [Fri, 21 May 2021 18:08:06 +0000 (11:08 -0700)]
RDS tcp loopback connection can hang
When TCP is used as transport and a program on the
system connects to RDS port 16385, connection is
accepted but denied per the rules of RDS. However,
RDS connections object is left in the list. Next
loopback connection will select that connection
object as it is at the head of list. The connection
attempt will hang as the connection object is set
to connect over TCP which is not allowed
The issue can be reproduced easily, use rds-ping
to ping a local IP address. After that use any
program like ncat to connect to the same IP
address and port 16385. This will hang so ctrl-c out.
Now try rds-ping, it will hang.
To fix the issue this patch adds checks to disallow
the connection object creation and destroys the
connection object.
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In a situation where memory allocation or dma mapping fails, an
invalid address is programmed into the descriptor. This can lead
to memory corruption. If the memory allocation fails, DMA should
reuse the previous skb and mapping and drop the packet. This patch
also increments rx drop counter.
Fixes: 2db54a9ba722 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver ") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Fainelli [Fri, 21 May 2021 17:46:14 +0000 (10:46 -0700)]
net: dsa: bcm_sf2: Fix bcm_sf2_reg_rgmii_cntrl() call for non-RGMII port
We cannot call bcm_sf2_reg_rgmii_cntrl() for a port that is not RGMII,
yet we do that in bcm_sf2_sw_mac_link_up() irrespective of the port's
interface. Move that read until we have properly qualified the PHY
interface mode. This avoids triggering a warning on 7278 platforms that
have GMII ports.
Fixes: 76d507f6c955 ("net: dsa: bcm_sf2: add function finding RGMII register") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Roese [Thu, 20 May 2021 08:43:18 +0000 (10:43 +0200)]
net: ethernet: mtk_eth_soc: Fix DIM support for MT7628/88
When updating to latest mainline for some testing on the GARDENA smart
gateway based on the MT7628, I noticed that ethernet does not work any
more. Commit 053dd128b4fe ("net: ethernet: mtk_eth_soc: implement
dynamic interrupt moderation") introduced this problem, as it missed the
RX_DIM & TX_DIM configuration for this SoC variant. This patch fixes
this by calling mtk_dim_rx() & mtk_dim_tx() in this case as well.
Signed-off-by: Stefan Roese <sr@denx.de> Fixes: 053dd128b4fe ("net: ethernet: mtk_eth_soc: implement dynamic interrupt moderation") Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Reto Schneider <code@reto-schneider.ch> Cc: Reto Schneider <reto.schneider@husqvarnagroup.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Song Liu [Wed, 12 May 2021 06:51:16 +0000 (23:51 -0700)]
perf stat: Skip evlist__[enable|disable] when all events uses BPF
When all events of a perf-stat session use BPF, it is not necessary to
call evlist__enable() and evlist__disable(). Skip them when
all_counters_use_bpf is true.
Signed-off-by: Song Liu <song@kernel.org> Reported-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Deprecation warnings are useful only for the developer, not an end user.
Display warnings only when requested using the python -W option. This
stops the display of warnings like:
tools/perf/scripts/python/exported-sql-viewer.py:5102: DeprecationWarning:
an integer is required (got type PySide2.QtCore.Qt.AlignmentFlag).
Implicit conversion to integers using __int__ is deprecated, and
may be removed in a future version of Python.
err = app.exec_()
Since the warning can be fixed only in PySide2, we must wait for it to
be finally fixed there.
The 'Array' class is present in more than one python standard library.
In some versions of Python 3, the following error occurs:
Traceback (most recent call last):
File "tools/perf/scripts/python/exported-sql-viewer.py", line 4702, in <lambda>
reports_menu.addAction(CreateAction(label, "Create a new window displaying branch events", lambda a=None,x=dbid: self.NewBranchView(x), self))
File "tools/perf/scripts/python/exported-sql-viewer.py", line 4727, in NewBranchView
BranchWindow(self.glb, event_id, ReportVars(), self)
File "tools/perf/scripts/python/exported-sql-viewer.py", line 3208, in __init__
self.model = LookupCreateModel(model_name, lambda: BranchModel(glb, event_id, report_vars.where_clause))
File "tools/perf/scripts/python/exported-sql-viewer.py", line 343, in LookupCreateModel
model = create_fn()
File "tools/perf/scripts/python/exported-sql-viewer.py", line 3208, in <lambda>
self.model = LookupCreateModel(model_name, lambda: BranchModel(glb, event_id, report_vars.where_clause))
File "tools/perf/scripts/python/exported-sql-viewer.py", line 3124, in __init__
self.fetcher = SQLFetcher(glb, sql, prep, self.AddSample)
File "tools/perf/scripts/python/exported-sql-viewer.py", line 2658, in __init__
self.buffer = Array(c_char, self.buffer_size, lock=False)
TypeError: abstract class
This apparently happens because Python can be inconsistent about which
class of the name 'Array' gets imported. Fix by importing explicitly by
name so that only the desired 'Array' gets imported.
Fixes: a1bc88e19b5aa ("perf scripts python: exported-sql-viewer.py: Add ability to display all the database tables") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20210521092053.25683-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
Cc: Jan Kara <jack@suse.cz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools headers UAPI: Sync linux/perf_event.h with the kernel sources
To pick the trivial change in:
863886d0f0bad29d ("signal: Deliver all of the siginfo perf data in _perf")
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
projects / kernel.git / log