cgroup: use irqsave in cgroup_rstat_flush_locked().
All callers of cgroup_rstat_flush_locked() acquire cgroup_rstat_lock
either with spin_lock_irq() or spin_lock_irqsave().
cgroup_rstat_flush_locked() itself acquires cgroup_rstat_cpu_lock which
is a raw_spin_lock. This lock is also acquired in
cgroup_rstat_updated() in IRQ context and therefore requires _irqsave()
locking suffix in cgroup_rstat_flush_locked().
Since there is no difference between spin_lock_t and raw_spin_lock_t on
!RT lockdep does not complain here. On RT lockdep complains because the
interrupts were not disabled here and a deadlock is possible.
Acquire the raw_spin_lock_t with disabled interrupts.
Link: https://lkml.kernel.org/r/20220301122143.1521823-2-bigeasy@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Tejun Heo <tj@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zefan Li <lizefan.x@bytedance.com>
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Subject: cgroup: add a comment to cgroup_rstat_flush_locked().
Add a comment why spin_lock_irq() -> raw_spin_lock_irqsave() is needed.
Link: https://lkml.kernel.org/r/Yh+DOK73hfVV5ThX@linutronix.de Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Tejun Heo <tj@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Helge Deller [Wed, 23 Mar 2022 23:06:26 +0000 (16:06 -0700)]
fat: use pointer to simple type in put_user()
The put_user(val,ptr) macro wants a pointer to a simple type, but in
fat_ioctl_filldir() the d_name field references an "array of chars". Be
more accurate and explicitly give the pointer to the first character of
the d_name[] array.
I noticed that issue while trying to optimize the parisc put_user()
macro and used an intermediate variable to store the pointer. In that
case I got this error:
In file included from include/linux/uaccess.h:11,
from include/linux/compat.h:17,
from fs/fat/dir.c:18:
fs/fat/dir.c: In function `fat_ioctl_filldir':
fs/fat/dir.c:725:33: error: invalid initializer
725 | if (put_user(0, d2->d_name) || \
| ^~
include/asm/uaccess.h:152:33: note: in definition of macro `__put_user'
152 | __typeof__(ptr) __ptr = ptr; \
| ^~~
fs/fat/dir.c:759:1: note: in expansion of macro `FAT_IOCTL_FILLDIR_FUNC'
759 | FAT_IOCTL_FILLDIR_FUNC(fat_ioctl_filldir, __fat_dirent)
Andreas Schwab <schwab@linux-m68k.org> suggested to use
__typeof__(&*(ptr)) __ptr = ptr;
instead. This works, but nevertheless it's probably reasonable to fix
the original caller too.
Link: https://lkml.kernel.org/r/Ygo+A9MREmC1H3kr@p100 Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: David Laight <David.Laight@aculab.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qinghua Jin [Wed, 23 Mar 2022 23:06:23 +0000 (16:06 -0700)]
minix: fix bug when opening a file with O_DIRECT
Testcase:
1. create a minix file system and mount it
2. open a file on the file system with O_RDWR|O_CREAT|O_TRUNC|O_DIRECT
3. open fails with -EINVAL but leaves an empty file behind. All other
open() failures don't leave the failed open files behind.
It is hard to check the direct_IO op before creating the inode. Just as
ext4 and btrfs do, this patch will resolve the issue by allowing to
create the file with O_DIRECT but returning error when writing the file.
Link: https://lkml.kernel.org/r/20220107133626.413379-1-qhjin.dev@gmail.com Signed-off-by: Qinghua Jin <qhjin.dev@gmail.com> Reported-by: Colin Ian King <colin.king@intel.com> Reviewed-by: Jan Kara <jack@suse.cz> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrei Vagin [Wed, 23 Mar 2022 23:06:20 +0000 (16:06 -0700)]
fs/pipe.c: local vars have to match types of proper pipe_inode_info fields
head, tail, ring_size are declared as unsigned int, so all local
variables that operate with these fields have to be unsigned to avoid
signed integer overflow.
Right now, it isn't an issue because the maximum pipe size is limited by
1U<<31.
Link: https://lkml.kernel.org/r/20220106171946.36128-1-avagin@gmail.com Signed-off-by: Andrei Vagin <avagin@gmail.com> Suggested-by: Dmitry Safonov <0x7f454c46@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrei Vagin [Wed, 23 Mar 2022 23:06:17 +0000 (16:06 -0700)]
fs/pipe: use kvcalloc to allocate a pipe_buffer array
Right now, kcalloc is used to allocate a pipe_buffer array. The size of
the pipe_buffer struct is 40 bytes. kcalloc allows allocating reliably
chunks with sizes less or equal to PAGE_ALLOC_COSTLY_ORDER (3). It
means that the maximum pipe size is 3.2MB in this case.
In CRIU, we use pipes to dump processes memory. CRIU freezes a target
process, injects a parasite code into it and then this code splices
memory into pipes. If a maximum pipe size is small, we need to do many
iterations or create many pipes.
kvcalloc attempt to allocate physically contiguous memory, but upon
failure, fall back to non-contiguous (vmalloc) allocation and so it
isn't limited by PAGE_ALLOC_COSTLY_ORDER.
The maximum pipe size for non-root users is limited by the
/proc/sys/fs/pipe-max-size sysctl that is 1MB by default, so only the
root user will be able to trigger vmalloc allocations.
Link: https://lkml.kernel.org/r/20220104171058.22580-1-avagin@gmail.com Signed-off-by: Andrei Vagin <avagin@gmail.com> Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Wed, 23 Mar 2022 23:06:11 +0000 (16:06 -0700)]
init.h: improve __setup and early_param documentation
Igor noted in [1] that there are quite a few __setup() handling
functions that return incorrect values. Doing this can be harmless, but
it can also cause strings to be added to init's argument or environment
list, polluting them.
Since __setup() handling and return values are not documented, first add
documentation for that. Also add more documentation for early_param()
handling and return values.
For __setup() functions, returning 0 (not handled) has questionable
value if it is just a malformed option value, as in
rodata=junk
since returning 0 would just cause "rodata=junk" to be added to init's
environment unnecessarily:
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
splash=native
rodata=junk
Also, there are no recommendations on whether to print a warning when an
unknown parameter value is seen. I am not addressing that here.
Sagar Patel [Wed, 23 Mar 2022 23:06:05 +0000 (16:06 -0700)]
checkpatch: use python3 to find codespell dictionary
Commit ef51bd5cf6f8 ("checkpatch: get default codespell dictionary path
from package location") introduced the ability to search for the
codespell dictionary rather than hardcoding its path.
codespell requires Python 3.6 or above, but on some systems, the python
executable is a Python 2.7 interpreter. In this case, searching for the
dictionary fails, subsequently making codespell fail:
No codespell typos will be found - file '/usr/share/codespell/dictionary.txt': No such file or directory
So, use python3 to remove ambiguity.
In addition, when searching for dictionary.txt, do not check if the
codespell executable exists since,
- checkpatch.pl only uses dictionary.txt, not the codespell
executable.
- codespell can be installed via a Python package manager, in which
case the codespell executable may not be present in a typical $PATH,
but a dictionary does exist.
Link: https://lkml.kernel.org/r/20220309180048.147672-1-sagarmp@cs.unc.edu Signed-off-by: Sagar Patel <sagarmp@cs.unc.edu> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Wed, 23 Mar 2022 23:05:53 +0000 (16:05 -0700)]
lib: bitmap: fix many kernel-doc warnings
Fix kernel-doc warings in lib/bitmap.c:
lib/bitmap.c:498: warning: Function parameter or member 'buf' not described in 'bitmap_print_to_buf'
lib/bitmap.c:498: warning: Function parameter or member 'maskp' not described in 'bitmap_print_to_buf'
lib/bitmap.c:498: warning: Function parameter or member 'nmaskbits' not described in 'bitmap_print_to_buf'
lib/bitmap.c:498: warning: Function parameter or member 'off' not described in 'bitmap_print_to_buf'
lib/bitmap.c:498: warning: Function parameter or member 'count' not described in 'bitmap_print_to_buf'
lib/bitmap.c:561: warning: contents before sections
lib/bitmap.c:606: warning: Function parameter or member 'buf' not described in 'bitmap_print_list_to_buf'
lib/bitmap.c:606: warning: Function parameter or member 'maskp' not described in 'bitmap_print_list_to_buf'
lib/bitmap.c:606: warning: Function parameter or member 'nmaskbits' not described in 'bitmap_print_list_to_buf'
lib/bitmap.c:606: warning: Function parameter or member 'off' not described in 'bitmap_print_list_to_buf'
lib/bitmap.c:606: warning: Function parameter or member 'count' not described in 'bitmap_print_list_to_buf'
lib/bitmap.c:819: warning: missing initial short description on line:
* bitmap_parselist_user()
This still leaves 15 warnings for function return values not described,
similar to this one:
bitmap.c:890: warning: No description found for return value of 'bitmap_parse'
Link: https://lkml.kernel.org/r/20220306065823.5153-1-rdunlap@infradead.org Fixes: 4654a45d1895 ("cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list") Fixes: 715c34972a84 ("bitmap, irq: add smp_affinity_list interface to /proc/irq") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Yury Norov <yury.norov@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: Mike Travis <mike.travis@hpe.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Feng Tang [Wed, 23 Mar 2022 23:05:50 +0000 (16:05 -0700)]
lib/Kconfig.debug: add ARCH dependency for FUNCTION_ALIGN option
0Day robots reported there is compiling issue for 'csky' ARCH when
CONFIG_DEBUG_FORCE_DATA_SECTION_ALIGNED is enabled [1]:
All errors (new ones prefixed by >>):
{standard input}: Assembler messages:
>> {standard input}:2277: Error: pcrel offset for branch to .LS000B too far (0x3c)
Which was discussed in [2]. And as there is no solution for csky yet, add
some dependency for this config to limit it to several ARCHs which have no
compiling issue so far.
Andy Shevchenko [Wed, 23 Mar 2022 23:05:47 +0000 (16:05 -0700)]
bitfield: add explicit inclusions to the example
It's not obvious that bitfield.h doesn't guarantee the bits.h inclusion
and the example in the former is confusing. Some developers think that
it's okay to just include bitfield.h to get it working. Change example
to explicitly include necessary headers in order to avoid confusion.
Link: https://lkml.kernel.org/r/20220207123341.47533-1-andriy.shevchenko@linux.intel.com Fixes: e8332df9b5e2 ("add basic register-field manipulation macros")
Depends-on: 0ad8be0919e5 ("locking/atomics, asm-generic: Move some macros from <linux/bitops.h> to a new <linux/bits.h> file") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Jan Dąbroś <jsd@semihalf.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christophe Leroy [Wed, 23 Mar 2022 23:05:44 +0000 (16:05 -0700)]
ilog2: force inlining of __ilog2_u32() and __ilog2_u64()
Building a kernel with CONFIG_CC_OPTIMISE_FOR_SIZE leads to
__ilog2_u32() being duplicated 50 times and __ilog2_u64() 3 times in
vmlinux on a tiny powerpc32 config.
__ilog2_u32() being 2 instructions it is not worth being kept out of
line, so force inlining. Allthough the u64 version is a bit bigger,
there is still a small benefit in keeping it inlined. On a 64 bits
config there's a real benefit.
With this change the size of vmlinux text is reduced by 1 kbytes, which
is approx 50% more than the size of the removed functions.
Rasmus Villemoes [Wed, 23 Mar 2022 23:05:41 +0000 (16:05 -0700)]
include: drop pointless __compiler_offsetof indirection
(1) compiler_types.h is unconditionally included via an -include flag
(see scripts/Makefile.lib), and it defines __compiler_offsetof
unconditionally. So testing for definedness of __compiler_offsetof is
mostly pointless.
(2) Every relevant compiler provides __builtin_offsetof (even sparse
has had that for 14 years), and if for whatever reason one would end
up picking up the poor man's fallback definition (C file compiler with
completely custom CFLAGS?), newer clang versions won't treat the
result as an Integer Constant Expression, so if used in place where
such is required (static initializer or static_assert), one would get
errors like
t.c:11:16: error: static_assert expression is not an integral constant expression
t.c:11:16: note: cast that performs the conversions of a reinterpret_cast is not allowed in a constant expression
t.c:4:33: note: expanded from macro 'offsetof'
#define offsetof(TYPE, MEMBER) ((size_t)&((TYPE *)0)->MEMBER)
So just define offsetof unconditionally and directly in terms of
__builtin_offsetof.
Link: https://lkml.kernel.org/r/20220202102147.326672-1-linux@rasmusvillemoes.dk Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook [Wed, 23 Mar 2022 23:05:38 +0000 (16:05 -0700)]
Kconfig.debug: make DEBUG_INFO selectable from a choice
Currently it's not possible to enable DEBUG_INFO for an all*config
build, since it is marked as "depends on !COMPILE_TEST".
This generally makes sense because a debug build of an all*config target
ends up taking much longer and the output is much larger. Having this
be "default off" makes sense.
However, there are cases where enabling DEBUG_INFO for such builds is
useful for doing treewide A/B comparisons of build options, etc.
Make DEBUG_INFO selectable from any of the DWARF version choice options,
with DEBUG_INFO_NONE being the default for COMPILE_TEST.
The mutually exclusive relationship between DWARF5 and BTF must be
inverted, but the result remains the same. Additionally moves
DEBUG_KERNEL and DEBUG_MISC up to the top of the menu because they were
enabling features _above_ it, making it weird to navigate menuconfig.
Bjorn Helgaas [Wed, 23 Mar 2022 23:05:32 +0000 (16:05 -0700)]
Documentation/sparse: add hints about __CHECKER__
Several attributes depend on __CHECKER__, but previously there was no
clue in the tree about when __CHECKER__ might be defined. Add hints at
the most common places (__kernel, __user, __iomem, __bitwise) and in the
sparse documentation.
Link: https://lkml.kernel.org/r/20220310220927.245704-3-helgaas@kernel.org Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: "Michael S . Tsirkin" <mst@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a spelling problem to remove warnings found by running
scripts/kernel-doc, which is caused by using 'make W=1'.
fs/proc/vmcore.c:492: warning: Function parameter or member 'size' not described in 'vmcore_alloc_buf'
fs/proc/vmcore.c:492: warning: Excess function parameter 'sizez' description in 'vmcore_alloc_buf'
Link: https://lkml.kernel.org/r/20220129011449.105278-1-yang.lee@linux.alibaba.com Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reported-by: Abaci Robot <abaci@linux.alibaba.com> Acked-by: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
proc/vmcore: fix possible deadlock on concurrent mmap and read
Lockdep noticed that there is chance for a deadlock if we have concurrent
mmap, concurrent read, and the addition/removal of a callback.
As nicely explained by Boqun:
"Lockdep warned about the above sequences because rw_semaphore is a
fair read-write lock, and the following can cause a deadlock:
TASK 1 TASK 2 TASK 3
====== ====== ======
down_write(mmap_lock);
down_read(vmcore_cb_rwsem)
down_write(vmcore_cb_rwsem); // blocked
down_read(vmcore_cb_rwsem); // cannot get the lock because of the fairness
down_read(mmap_lock); // blocked
IOW, a reader can block another read if there is a writer queued by
the second reader and the lock is fair"
To fix this, convert to srcu to make this deadlock impossible. We need
srcu as our callbacks can sleep. With this change, I cannot trigger any
lockdep warnings.
======================================================
WARNING: possible circular locking dependency detected
5.17.0-0.rc0.20220117git0c947b893d69.68.test.fc36.x86_64 #1 Not tainted
------------------------------------------------------
makedumpfile/542 is trying to acquire lock: ffffffff832d2eb8 (vmcore_cb_rwsem){.+.+}-{3:3}, at: mmap_vmcore+0x340/0x580
but task is already holding lock: ffff8880af226438 (&mm->mmap_lock#2){++++}-{3:3}, at: vm_mmap_pgoff+0x84/0x150
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
Hao Lee [Wed, 23 Mar 2022 23:05:20 +0000 (16:05 -0700)]
proc: alloc PATH_MAX bytes for /proc/${pid}/fd/ symlinks
It's not a standard approach that use __get_free_page() to alloc path
buffer directly. We'd better use kmalloc and PATH_MAX.
PAGE_SIZE is different on different archs. An unlinked file
with very long canonical pathname will readlink differently
because "(deleted)" eats into a buffer. --adobriyan
Linus Torvalds [Sun, 20 Mar 2022 16:27:52 +0000 (09:27 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"Two driver fixes:
- a fix for zinitix touchscreen to properly report contacts
- a fix for aiptek tablet driver to be more resilient to devices with
incorrect descriptors"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: aiptek - properly check endpoint type
Input: zinitix - do not report shadow fingers
Borislav Petkov [Wed, 16 Mar 2022 21:05:52 +0000 (22:05 +0100)]
kvm/emulate: Fix SETcc emulation function offsets with SLS
The commit in Fixes started adding INT3 after RETs as a mitigation
against straight-line speculation.
The fastop SETcc implementation in kvm's insn emulator uses macro magic
to generate all possible SETcc functions and to jump to them when
emulating the respective instruction.
However, it hardcodes the size and alignment of those functions to 4: a
three-byte SETcc insn and a single-byte RET. BUT, with SLS, there's an
INT3 that gets slapped after the RET, which brings the whole scheme out
of alignment:
15: 0f 90 c0 seto %al
18: c3 ret
19: cc int3
1a: 0f 1f 00 nopl (%rax)
1d: 0f 91 c0 setno %al
20: c3 ret
21: cc int3
22: 0f 1f 00 nopl (%rax)
25: 0f 92 c0 setb %al
28: c3 ret
29: cc int3
Raise the alignment value when SLS is enabled and use a macro for that
instead of hard-coding naked numbers.
Fixes: da5b4b99b70c ("x86: Add straight-line-speculation mitigation") Reported-by: Jamie Heilman <jamie@audible.transient.net> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Jamie Heilman <jamie@audible.transient.net> Link: https://lore.kernel.org/r/YjGzJwjrvxg5YZ0Z@audible.transient.net
[Add a comment and a bit of safety checking, since this is going to be changed
again for IBT support. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sat, 19 Mar 2022 23:36:32 +0000 (16:36 -0700)]
Merge tag 'soc-fixes-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fix from Arnd Bergmann:
"Here is one last regression fix for 5.17, reverting a patch that went
into 5.16 as a cleanup that ended up breaking external interrupts on
Layerscape chips.
The revert makes it work again, but also reintroduces a build time
warning about the nonstandard DT binding that will have to be dealt
with in the future"
* tag 'soc-fixes-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
Revert "arm64: dts: freescale: Fix 'interrupt-map' parent address cells"
Linus Torvalds [Sat, 19 Mar 2022 22:56:43 +0000 (15:56 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small(ish) fixes, both in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fnic: Finish scsi_cmnd before dropping the spinlock
scsi: mpt3sas: Page fault in reply q processing
Linus Torvalds [Sat, 19 Mar 2022 18:04:10 +0000 (11:04 -0700)]
Merge tag 'perf-tools-fixes-for-v5.17-2022-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Avoid iterating empty evlist, fixing a segfault with 'perf stat --null'
- Ignore case in topdown.slots check, fixing issue with Intel Icelake
JSON metrics.
- Fix symbol size calculation condition for fixing up corner case
symbol end address obtained from Kallsyms.
* tag 'perf-tools-fixes-for-v5.17-2022-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf parse-events: Ignore case in topdown.slots check
perf evlist: Avoid iteration for empty evlist.
perf symbols: Fix symbol size calculation condition
Linus Torvalds [Sat, 19 Mar 2022 17:21:34 +0000 (10:21 -0700)]
Merge tag 'char-misc-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fix from Greg KH:
"Here is a single driver fix for 5.17-final that has been submitted
many times but I somehow missed it in my patch queue:
- fix for counter sysfs code for reported problem
This has been in linux-next all week with no reported issues"
* tag 'char-misc-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
counter: Stop using dev_get_drvdata() to get the counter device
Linus Torvalds [Sat, 19 Mar 2022 17:16:33 +0000 (10:16 -0700)]
Merge tag 'usb-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small remaining USB fixes for 5.17-final.
They include:
- two USB gadget driver fixes for reported problems
- usbtmc driver fix for syzbot found issues
- musb patch partial revert to resolve a reported regression.
All of these have been in linux-next this week with no reported
problems"
* tag 'usb-5.17-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: gadget: Fix use-after-free bug by not setting udc->dev.driver
usb: usbtmc: Fix bug in pipe direction for control transfers
partially Revert "usb: musb: Set the DT node on the child device"
usb: gadget: rndis: prevent integer overflow in rndis_set_response()
Michael Petlan [Thu, 17 Mar 2022 13:55:36 +0000 (14:55 +0100)]
perf symbols: Fix symbol size calculation condition
Before this patch, the symbol end address fixup to be called, needed two
conditions being met:
if (prev->end == prev->start && prev->end != curr->start)
Where
"prev->end == prev->start" means that prev is zero-long
(and thus needs a fixup)
and
"prev->end != curr->start" means that fixup hasn't been applied yet
However, this logic is incorrect in the following situation:
In this case, prev->start == prev->end == curr->start == curr->end,
thus the condition above thinks that "we need a fixup due to zero
length of prev symbol, but it has been probably done, since the
prev->end == curr->start", which is wrong.
After the patch, the execution path proceeds to arch__symbols__fixup_end
function which fixes up the size of prev symbol by adding page_size to
its end offset.
Fixes: d7291137178e8707 ("perf symbols: Improve kallsyms symbol end addr calculation") Signed-off-by: Michael Petlan <mpetlan@redhat.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Link: http://lore.kernel.org/lkml/20220317135536.805-1-mpetlan@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Fri, 18 Mar 2022 19:32:59 +0000 (12:32 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
"Fix two compiler warnings introduced by recent commits: pointer
arithmetic and double initialisation of struct field"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: errata: avoid duplicate field initializer
arm64: fix clang warning about TRAMP_VALIAS
Linus Torvalds [Fri, 18 Mar 2022 19:22:15 +0000 (12:22 -0700)]
Merge tag '5.17-rc8-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fix from Steve French:
"Small fix for regression in multiuser mounts.
The additional improvements suggested by Ronnie to make the server and
session status handling code easier to read can wait for the 5.18
merge window."
* tag '5.17-rc8-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix incorrect session setup check for multiuser mounts
Linus Torvalds [Fri, 18 Mar 2022 19:15:56 +0000 (12:15 -0700)]
Merge tag 'block-5.17-2022-03-18' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Revert of a nvme target feature (Hannes)
- Fix a memory leak with rq-qos (Ming)
* tag 'block-5.17-2022-03-18' of git://git.kernel.dk/linux-block:
nvmet: revert "nvmet: make discovery NQN configurable"
block: release rq qos structures for queue without disk
* tag 'drm-fixes-2022-03-18' of git://anongit.freedesktop.org/drm/drm:
drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS
drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings
drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()
drm/mgag200: Fix PLL setup for g200wb and g200ew
Arnd Bergmann [Wed, 16 Mar 2022 18:38:18 +0000 (19:38 +0100)]
arm64: fix clang warning about TRAMP_VALIAS
The newly introduced TRAMP_VALIAS definition causes a build warning
with clang-14:
arch/arm64/include/asm/vectors.h:66:31: error: arithmetic on a null pointer treated as a cast from integer to pointer is a GNU extension [-Werror,-Wnull-pointer-arithmetic]
return (char *)TRAMP_VALIAS + SZ_2K * slot;
Change the addition to something clang does not complain about.
Dave Airlie [Fri, 18 Mar 2022 03:30:30 +0000 (13:30 +1000)]
Merge tag 'drm-misc-fixes-2022-03-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* drm/imx: Don't test bus flags in atomic check
* drm/mgag200: Fix PLL setup on some models
* drm/panel: Fix bpp settings on Innolux G070Y2-L01; Fix DRM_PANEL_EDP
Kconfig dependencies
Linus Torvalds [Thu, 17 Mar 2022 19:40:59 +0000 (12:40 -0700)]
Merge tag 'acpi-5.17-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert recent commit that caused multiple systems to misbehave due to
firmware issues"
* tag 'acpi-5.17-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: scan: Do not add device IDs from _CID if _HID is not valid"
Rework to add the header files to LOCAL_HDRS before including ../lib.mk,
since the dependency is evaluated in '$(OUTPUT)/%:%.c $(LOCAL_HDRS)' in
file lib.mk.
Link: https://lkml.kernel.org/r/20220304000645.1888133-1-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joseph Qi [Wed, 16 Mar 2022 23:15:09 +0000 (16:15 -0700)]
ocfs2: fix crash when initialize filecheck kobj fails
Once s_root is set, genric_shutdown_super() will be called if
fill_super() fails. That means, we will call ocfs2_dismount_volume()
twice in such case, which can lead to kernel crash.
Fix this issue by initializing filecheck kobj before setting s_root.
Link: https://lkml.kernel.org/r/20220310081930.86305-1-joseph.qi@linux.alibaba.com Fixes: 2b4fefa9896a ("ocfs2: add kobject for online file check") Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Wed, 16 Mar 2022 23:15:06 +0000 (16:15 -0700)]
configs/debug: restore DEBUG_INFO=y for overriding
Previously, I failed to realize that Kees' patch [1] has not been merged
into the mainline yet, and dropped DEBUG_INFO=y too eagerly from the
mainline. As the results, "make debug.config" won't be able to flip
DEBUG_INFO=n from the existing .config. This should close the gaps of a
few weeks before Kees' patch is there, and work regardless of their
merging status anyway.
The reason for the livelock is that swapcache_prepare() always returns
EEXIST, indicating that SWAP_HAS_CACHE has not been cleared, so that it
cannot jump out of the loop. We suspect that the task that clears the
SWAP_HAS_CACHE flag never gets a chance to run. We try to lower the
priority of the task stuck in a livelock so that the task that clears
the SWAP_HAS_CACHE flag will run. The results show that the system
returns to normal after the priority is lowered.
In our testing, multiple real-time tasks are bound to the same core, and
the task in the livelock is the highest priority task of the core, so
the livelocked task cannot be preempted.
Although cond_resched() is used by __read_swap_cache_async, it is an
empty function in the preemptive system and cannot achieve the purpose
of releasing the CPU. A high-priority task cannot release the CPU
unless preempted by a higher-priority task. But when this task is
already the highest priority task on this core, other tasks will not be
able to be scheduled. So we think we should replace cond_resched() with
schedule_timeout_uninterruptible(1), schedule_timeout_interruptible will
call set_current_state first to set the task state, so the task will be
removed from the running queue, so as to achieve the purpose of giving
up the CPU and prevent it from running in kernel mode for too long.
(akpm: ugly hack becomes uglier. But it fixes the issue in a
backportable-to-stable fashion while we hopefully work on something
better)
Link: https://lkml.kernel.org/r/20220221111749.1928222-1-cgel.zte@gmail.com Signed-off-by: Guo Ziliang <guo.ziliang@zte.com.cn> Reported-by: Zeal Robot <zealci@zte.com.cn> Reviewed-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Reviewed-by: Jiang Xuexin <jiang.xuexin@zte.com.cn> Reviewed-by: Yang Yang <yang.yang29@zte.com.cn> Acked-by: Hugh Dickins <hughd@google.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Roger Quadros <rogerq@kernel.org> Cc: Ziliang Guo <guo.ziliang@zte.com.cn> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ivan Vecera [Thu, 17 Mar 2022 10:45:24 +0000 (11:45 +0100)]
iavf: Fix hang during reboot/shutdown
Recent commit 2d25b6bf5966 ("iavf: Add waiting so the port is
initialized in remove") adds a wait-loop at the beginning of
iavf_remove() to ensure that port initialization is finished
prior unregistering net device. This causes a regression
in reboot/shutdown scenario because in this case callback
iavf_shutdown() is called and this callback detaches the device,
makes it down if it is running and sets its state to __IAVF_REMOVE.
Later shutdown callback of associated PF driver (e.g. ice_shutdown)
is called. That callback calls among other things sriov_disable()
that calls indirectly iavf_remove() (see stack trace below).
As the adapter state is already __IAVF_REMOVE then the mentioned
loop is end-less and shutdown process hangs.
The patch fixes this by checking adapter's state at the beginning
of iavf_remove() and skips the rest of the function if the adapter
is already in remove state (shutdown is in progress).
Reproducer:
1. Create VF on PF driven by ice or i40e driver
2. Ensure that the VF is bound to iavf driver
3. Reboot
Vladimir Oltean [Wed, 16 Mar 2022 19:21:17 +0000 (21:21 +0200)]
net: mscc: ocelot: fix backwards compatibility with single-chain tc-flower offload
ACL rules can be offloaded to VCAP IS2 either through chain 0, or, since
the blamed commit, through a chain index whose number encodes a specific
PAG (Policy Action Group) and lookup number.
The chain number is translated through ocelot_chain_to_pag() into a PAG,
and through ocelot_chain_to_lookup() into a lookup number.
The problem with the blamed commit is that the above 2 functions don't
have special treatment for chain 0. So ocelot_chain_to_pag(0) returns
filter->pag = 224, which is in fact -32, but the "pag" field is an u8.
So we end up programming the hardware with VCAP IS2 entries having a PAG
of 224. But the way in which the PAG works is that it defines a subset
of VCAP IS2 filters which should match on a packet. The default PAG is
0, and previous VCAP IS1 rules (which we offload using 'goto') can
modify it. So basically, we are installing filters with a PAG on which
no packet will ever match. This is the hardware equivalent of adding
filters to a chain which has no 'goto' to it.
Restore the previous functionality by making ACL filters offloaded to
chain 0 go to PAG 0 and lookup number 0. The choice of PAG is clearly
correct, but the choice of lookup number isn't "as before" (which was to
leave the lookup a "don't care"). However, lookup 0 should be fine,
since even though there are ACL actions (policers) which have a
requirement to be used in a specific lookup, that lookup is 0.
Doug Berger [Thu, 17 Mar 2022 01:28:12 +0000 (18:28 -0700)]
net: bcmgenet: skip invalid partial checksums
The RXCHK block will return a partial checksum of 0 if it encounters
a problem while receiving a packet. Since a 1's complement sum can
only produce this result if no bits are set in the received data
stream it is fair to treat it as an invalid partial checksum and
not pass it up the stack.
Fixes: 27aaaa638a5b ("net: bcmgenet: use CHECKSUM_COMPLETE for NETIF_F_RXCSUM") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220317012812.1313196-1-opendmb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Manish Chopra [Wed, 16 Mar 2022 21:46:13 +0000 (14:46 -0700)]
bnx2x: fix built-in kernel driver load failure
Commit 5e51c4e97a36 ("bnx2x: Utilize firmware 7.13.21.0")
added request_firmware() logic in probe() which caused
load failure when firmware file is not present in initrd (below),
as access to firmware file is not feasible during probe.
Direct firmware load for bnx2x/bnx2x-e2-7.13.15.0.fw failed with error -2
Direct firmware load for bnx2x/bnx2x-e2-7.13.21.0.fw failed with error -2
This patch fixes this issue by -
1. Removing request_firmware() logic from the probe()
such that .ndo_open() handle it as it used to handle
it earlier
2. Given request_firmware() is removed from probe(), so
driver has to relax FW version comparisons a bit against
the already loaded FW version (by some other PFs of same
adapter) to allow different compatible/close enough FWs with which
multiple PFs may run with (in different environments), as the
given PF who is in probe flow has no idea now with which firmware
file version it is going to initialize the device in ndo_open()
drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS
Fix a number of undefined references to drm_kms_helper.ko in
drm_dp_helper.ko:
arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_duplicate_state':
drm_dp_mst_topology.c:(.text+0x2df0): undefined reference to `__drm_atomic_helper_private_obj_duplicate_state'
arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_delayed_destroy_work':
drm_dp_mst_topology.c:(.text+0x370c): undefined reference to `drm_kms_helper_hotplug_event'
arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_up_req_work':
drm_dp_mst_topology.c:(.text+0x7938): undefined reference to `drm_kms_helper_hotplug_event'
arm-suse-linux-gnueabi-ld: drivers/gpu/drm/dp/drm_dp_mst_topology.o: in function `drm_dp_mst_link_probe_work':
drm_dp_mst_topology.c:(.text+0x82e0): undefined reference to `drm_kms_helper_hotplug_event'
This happens if panel-edp.ko has been configured with
DRM_PANEL_EDP=y
DRM_DP_HELPER=y
DRM_KMS_HELPER=m
which builds DP helpers into the kernel and KMS helpers sa a module.
Making DRM_PANEL_EDP select DRM_KMS_HELPER resolves this problem.
To avoid a resulting cyclic dependency with DRM_PANEL_BRIDGE, don't
make the latter depend on DRM_KMS_HELPER and fix the one DRM bridge
drivers that doesn't already select DRM_KMS_HELPER. As KMS helpers
cannot be selected directly by the user, config symbols should avoid
depending on it anyway.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 4a5f1dc12237 ("drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP") Acked-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Brian Masney <bmasney@redhat.com> Reported-by: kernel test robot <lkp@intel.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Linux Kernel Functional Testing <lkft@linaro.org> Cc: Lyude Paul <lyude@redhat.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: dri-devel@lists.freedesktop.org Cc: Dave Airlie <airlied@redhat.com> Cc: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/478296/
Steve French [Thu, 17 Mar 2022 03:08:43 +0000 (22:08 -0500)]
smb3: fix incorrect session setup check for multiuser mounts
A recent change to how the SMB3 server (socket) and session status
is managed regressed multiuser mounts by changing the check
for whether session setup is needed to the socket (TCP_Server_info)
structure instead of the session struct (cifs_ses). Add additional
check in cifs_setup_sesion to fix this.
Fixes: 6714757eb215 ("cifs: maintain a state machine for tcp/smb/tcon sessions") Reported-by: Ronnie Sahlberg <lsahlber@redhat.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
This reverts commit bbff5b072192211d33e6d784999a8a4ae75abc98. That
updated the expected device tree binding format for the ls-extirq
driver, without also updating the parsing code (ls_extirq_parse_map)
to the new format.
The context is that the ls-extirq driver uses the standard
"interrupt-map" OF property in a non-standard way, as suggested by
Rob Herring during review:
https://lore.kernel.org/lkml/20190927161118.GA19333@bogus/
This has turned out to be problematic, as Marc Zyngier discovered
through commit 0fe4b28cfe5c ("of/irq: Allow matching of an interrupt-map
local to an interrupt controller"), later fixed through commit 5759363bd08a ("of/irq: Add a quirk for controllers with their own
definition of interrupt-map"). Marc's position, expressed on multiple
opportunities, is that:
(a) [ making private use of the reserved "interrupt-map" name in a
driver ] "is wrong, by the very letter of what an interrupt-map
means. If the interrupt map points to an interrupt controller,
that's the target for the interrupt."
https://lore.kernel.org/lkml/87k0g8jlmg.wl-maz@kernel.org/
(b) [ updating the driver's bindings to accept a non-reserved name for
this property, as an alternative, is ] "is totally pointless. These
machines have been in the wild for years, and existing DTs will be
there *forever*."
https://lore.kernel.org/lkml/87ilvrk1r0.wl-maz@kernel.org/
Considering the above, the Linux kernel has quirks in place to deal with
the ls-extirq's non-standard use of the "interrupt-map". These quirks
may be needed in other operating systems that consume this device tree,
yet this is seen as the only viable solution.
Therefore, the premise of the patch being reverted here is invalid.
It doesn't matter whether the driver, in its non-standard use of the
property, complies to the standard format or not, since this property
isn't expected to be used for interrupt translation by the core.
This change restores LS1088A, LS2088A/LS2085A and LX2160A to their
previous bindings, which allows these systems to continue to use
external interrupt lines with the correct polarity.
1) Fix a kernel-info-leak in pfkey.
From Haimin Zhang.
2) Fix an incorrect check of the return value of ipv6_skip_exthdr.
From Sabrina Dubroca.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
esp6: fix check on ipv6_skip_exthdr's return value
af_key: add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register
====================
Jakub Kicinski [Wed, 16 Mar 2022 18:08:09 +0000 (11:08 -0700)]
Merge tag 'wireless-2022-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v5.17
Third set of fixes for v5.17. We have only one revert to fix an ath10k
regression.
* tag 'wireless-2022-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
Revert "ath10k: drop beacon and probe response which leak from other channel"
====================
drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()
If display timings were read from the devicetree using
of_get_display_timing() and pixelclk-active is defined
there, the flag DISPLAY_FLAGS_SYNC_POSEDGE/NEGEDGE is
automatically generated. Through the function
drm_bus_flags_from_videomode() e.g. called in the
panel-simple driver this flag got into the bus flags,
but then in imx_pd_bridge_atomic_check() the bus flag
check failed and will not initialize the display. The
original commit 987955a397f8 does not explain why this
check was introduced. So remove the bus flags check,
because it stops the initialization of the display with
valid bus flags.
Fixes: 987955a397f8 ("drm/imx: pd: Use bus format/flags provided by the bridge when available") Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Marek Vasut <marex@denx.de> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org
To: dri-devel@lists.freedesktop.org Tested-by: Max Krummenacher <max.krummenacher@toradex.com> Acked-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Marek Vasut <marex@denx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220201113643.4638-1-cniedermaier@dh-electronics.com Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
I was reported privately that this commit breaks AP and mesh mode on QCA9984
(firmware 10.4-3.9.0.2-00156). So revert the commit to fix the regression.
There was a conflict due to cfg80211 API changes but that was easy to fix.
Revert "ACPI: scan: Do not add device IDs from _CID if _HID is not valid"
Revert commit 1f4f5d3fe133 ("ACPI: scan: Do not add device IDs from _CID
if _HID is not valid"), because it has introduced regressions on
multiple systems, even though it only has effect on clearly invalid
firmware.
Reported-by: Pierre-Louis Bossart <notifications@github.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Jiasheng Jiang [Mon, 14 Mar 2022 02:01:25 +0000 (10:01 +0800)]
hv_netvsc: Add check for kvmalloc_array
As the potential failure of the kvmalloc_array(),
it should be better to check and restore the 'data'
if fails in order to avoid the dereference of the
NULL pointer.
Fix double free possibility in iavf_disable_vf, as crit_lock is
freed in caller, iavf_reset_task. Add kernel-doc for iavf_disable_vf.
Remove mutex_unlock in iavf_disable_vf.
Without this patch there is double free scenario, when calling
iavf_reset_task.
Fixes: c4569c809d75 ("iavf: Fix deadlock in iavf_reset_task") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice: fix NULL pointer dereference in ice_update_vsi_tx_ring_stats()
It is possible to do NULL pointer dereference in routine that updates
Tx ring stats. Currently only stats and bytes are updated when ring
pointer is valid, but later on ring is accessed to propagate gathered Tx
stats onto VSI stats.
Change the existing logic to move to next ring when ring is NULL.
Fixes: 8015762f94a4 ("ice: split ice_ring onto Tx/Rx separate structs") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Uwe Kleine-König [Fri, 11 Mar 2022 00:18:09 +0000 (19:18 -0500)]
counter: Stop using dev_get_drvdata() to get the counter device
dev_get_drvdata() returns NULL since commit fb79586fb982 ("counter: Use
container_of instead of drvdata to track counter_device") which wrongly
claimed there were no users of drvdata. Convert to container_of() to
fix a null pointer dereference.
David Jeffery [Fri, 11 Mar 2022 18:43:59 +0000 (13:43 -0500)]
scsi: fnic: Finish scsi_cmnd before dropping the spinlock
When aborting a SCSI command through fnic, there is a race with the fnic
interrupt handler which can result in the SCSI command and its request
being completed twice. If the interrupt handler claims the command by
setting CMD_SP to NULL first, the abort handler assumes the interrupt
handler has completed the command and returns SUCCESS, causing the request
for the scsi_cmnd to be re-queued.
But the interrupt handler may not have finished the command yet. After it
drops the spinlock protecting CMD_SP, it does memory cleanup before finally
calling scsi_done() to complete the scsi_cmnd. If the call to scsi_done
occurs after the abort handler finishes and re-queues the request, the
completion of the scsi_cmnd will advance and try to double complete a
request already queued for retry.
This patch fixes the issue by moving scsi_done() and any other use of
scsi_cmnd to before the spinlock is released by the interrupt handler.
Link: https://lore.kernel.org/r/20220311184359.2345319-1-djeffery@redhat.com Reviewed-by: Laurence Oberman <loberman@redhat.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Although the bug manifested in the driver core, the real cause was a
race with the gadget core. dev_uevent() does:
if (dev->driver)
add_uevent_var(env, "DRIVER=%s", dev->driver->name);
and between the test and the dereference of dev->driver, the gadget
core sets dev->driver to NULL.
The race wouldn't occur if the gadget core registered its devices on
a real bus, using the standard synchronization techniques of the
driver core. However, it's not necessary to make such a large change
in order to fix this bug; all we need to do is make sure that
udc->dev.driver is always NULL.
In fact, there is no reason for udc->dev.driver ever to be set to
anything, let alone to the value it currently gets: the address of the
gadget's driver. After all, a gadget driver only knows how to manage
a gadget, not how to manage a UDC.
This patch simply removes the statements in the gadget core that touch
udc->dev.driver.
This commit - while attempting to fix a regression - has caused a number
of other problems. As the fallout from it is more significant than the
initial problem itself, revert it for now before we find a correct
solution.
partially Revert "usb: musb: Set the DT node on the child device"
This reverts the omap2430 changes of
commit 7bf05b48ba2c ("usb: musb: Set the DT node on the child device")
Since v5.17-rc1, musb is broken on the gta04 and openpandora devices
(omap3530/dm3730). BeagleBone Black (am335x) seems to work.
Symptoms of this bug are
a) main symptom
[ 21.336517] using random host ethernet address
[ 21.341430] using host ethernet address: 32:70:05:18:ff:78
[ 21.341461] using self ethernet address: 46:10:3a:b3:af:d9
[ 21.358184] usb0: HOST MAC 32:70:05:18:ff:78
[ 21.376678] usb0: MAC 46:10:3a:b3:af:d9
[ 21.388305] using random self ethernet address
[ 21.393371] using random host ethernet address
[ 21.398162] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 21.421081] g_ether gadget: g_ether ready
[ 21.492156] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 21.691345] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 21.803192] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 21.819427] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 22.124450] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 22.168518] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 22.179382] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.213592] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
[ 23.221832] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.227905] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.239440] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.401000] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.407073] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.426361] musb-hdrc musb-hdrc.1.auto: Could not enable: -22
[ 23.734466] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
[ 23.742462] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
[ 23.750396] musb-hdrc musb-hdrc.1.auto: pm runtime get failed in musb_gadget_queue
... (repeats with high frequency)
This stops if the USB cable is unplugged and restarts if it is plugged in again.
b) also found in the log
[ 6.498107] ------------[ cut here ]------------
[ 6.502960] WARNING: CPU: 0 PID: 868 at arch/arm/mach-omap2/omap_hwmod.c:1885 _enable+0x50/0x234
[ 6.512207] omap_hwmod: usb_otg_hs: enabled state can only be entered from initialized, idle, or disabled state
[ 6.522766] Modules linked in: omap2430(+) bmp280_i2c bmp280 itg3200 at24 tsc2007 leds_tca6507 bma180 hmc5843_i2c hmc5843_core industrialio_triggered_buffer lis3lv02d_i2c kfifo_buf lis3lv02d phy_twl4030_usb snd_soc_omap_mcbsp snd_soc_ti_sdma musb_hdrc snd_soc_twl4030 gnss_sirf twl4030_vibra twl4030_madc twl4030_charger twl4030_pwrbutton gnss industrialio ehci_omap omapdrm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm drm_panel_orientation_quirks cec
[ 6.566436] CPU: 0 PID: 868 Comm: udevd Not tainted 5.16.0-rc5-letux+ #8251
[ 6.573730] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[ 6.580322] [<c010ed30>] (unwind_backtrace) from [<c010a1d0>] (show_stack+0x10/0x14)
[ 6.588470] [<c010a1d0>] (show_stack) from [<c0897c14>] (dump_stack_lvl+0x40/0x4c)
[ 6.596405] [<c0897c14>] (dump_stack_lvl) from [<c0130cc4>] (__warn+0xb4/0xdc)
[ 6.604003] [<c0130cc4>] (__warn) from [<c0130d5c>] (warn_slowpath_fmt+0x70/0x9c)
[ 6.611846] [<c0130d5c>] (warn_slowpath_fmt) from [<c011f4d4>] (_enable+0x50/0x234)
[ 6.619903] [<c011f4d4>] (_enable) from [<c012081c>] (omap_hwmod_enable+0x28/0x40)
[ 6.627838] [<c012081c>] (omap_hwmod_enable) from [<c0120ff4>] (omap_device_enable+0x4c/0x78)
[ 6.636779] [<c0120ff4>] (omap_device_enable) from [<c0121030>] (_od_runtime_resume+0x10/0x3c)
[ 6.645812] [<c0121030>] (_od_runtime_resume) from [<c05c688c>] (__rpm_callback+0x3c/0xf4)
[ 6.654510] [<c05c688c>] (__rpm_callback) from [<c05c6994>] (rpm_callback+0x50/0x54)
[ 6.662628] [<c05c6994>] (rpm_callback) from [<c05c66b0>] (rpm_resume+0x448/0x4e4)
[ 6.670593] [<c05c66b0>] (rpm_resume) from [<c05c6784>] (__pm_runtime_resume+0x38/0x50)
[ 6.678985] [<c05c6784>] (__pm_runtime_resume) from [<bf14ab20>] (musb_init_controller+0x350/0xa5c [musb_hdrc])
[ 6.689727] [<bf14ab20>] (musb_init_controller [musb_hdrc]) from [<c05bccb8>] (platform_probe+0x58/0xa8)
[ 6.699737] [<c05bccb8>] (platform_probe) from [<c05badf0>] (really_probe+0x170/0x2fc)
[ 6.708068] [<c05badf0>] (really_probe) from [<c05bb040>] (__driver_probe_device+0xc4/0xd8)
[ 6.716827] [<c05bb040>] (__driver_probe_device) from [<c05bb084>] (driver_probe_device+0x30/0xac)
[ 6.726226] [<c05bb084>] (driver_probe_device) from [<c05bb3d0>] (__device_attach_driver+0x94/0xb4)
[ 6.735717] [<c05bb3d0>] (__device_attach_driver) from [<c05b93f8>] (bus_for_each_drv+0xa0/0xb4)
[ 6.744934] [<c05b93f8>] (bus_for_each_drv) from [<c05bb248>] (__device_attach+0xc0/0x134)
[ 6.753631] [<c05bb248>] (__device_attach) from [<c05b9fcc>] (bus_probe_device+0x28/0x80)
[ 6.762207] [<c05b9fcc>] (bus_probe_device) from [<c05b7e40>] (device_add+0x5fc/0x788)
[ 6.770507] [<c05b7e40>] (device_add) from [<c05bd240>] (platform_device_add+0x70/0x1bc)
[ 6.779022] [<c05bd240>] (platform_device_add) from [<bf177830>] (omap2430_probe+0x260/0x2d4 [omap2430])
[ 6.789001] [<bf177830>] (omap2430_probe [omap2430]) from [<c05bccb8>] (platform_probe+0x58/0xa8)
[ 6.798309] [<c05bccb8>] (platform_probe) from [<c05badf0>] (really_probe+0x170/0x2fc)
[ 6.806610] [<c05badf0>] (really_probe) from [<c05bb040>] (__driver_probe_device+0xc4/0xd8)
[ 6.815399] [<c05bb040>] (__driver_probe_device) from [<c05bb084>] (driver_probe_device+0x30/0xac)
[ 6.824798] [<c05bb084>] (driver_probe_device) from [<c05bb4b4>] (__driver_attach+0xc4/0xd8)
[ 6.833648] [<c05bb4b4>] (__driver_attach) from [<c05b9308>] (bus_for_each_dev+0x64/0xa0)
[ 6.842224] [<c05b9308>] (bus_for_each_dev) from [<c05ba248>] (bus_add_driver+0x148/0x1a4)
[ 6.850891] [<c05ba248>] (bus_add_driver) from [<c05bbd1c>] (driver_register+0xb4/0xf8)
[ 6.859313] [<c05bbd1c>] (driver_register) from [<c0101f54>] (do_one_initcall+0x90/0x1c8)
[ 6.867889] [<c0101f54>] (do_one_initcall) from [<c0893968>] (do_init_module+0x4c/0x204)
[ 6.876373] [<c0893968>] (do_init_module) from [<c01b4c30>] (load_module+0x13f0/0x1928)
[ 6.884796] [<c01b4c30>] (load_module) from [<c01b53a0>] (sys_finit_module+0xa0/0xc0)
[ 6.893005] [<c01b53a0>] (sys_finit_module) from [<c0100080>] (ret_fast_syscall+0x0/0x54)
[ 6.901580] Exception stack(0xc2807fa8 to 0xc2807ff0)
[ 6.906890] 7fa0: b6e517d40005206800000006b6e509f800000000b6e5131c
[ 6.915466] 7fc0: b6e517d400052068cd7180000000017b0002000000037f780005004800063368
[ 6.924011] 7fe0: bed8fef0bed8fee0b6e4ac4bb6f55a42
[ 6.929321] ---[ end trace d715ff121b58763c ]---
c) git bisect result on testing for "musb-hdrc" in the console log:
The musb glue drivers just copy the glue resources to the musb child device.
Instead, set the musb child device's DT node pointer to the parent device's
node so that platform_get_irq_byname() can find the resources in the DT.
This removes the need for statically populating the IRQ resources from the
DT which has been deprecated for some time.
Hannes Reinecke [Tue, 15 Mar 2022 09:14:36 +0000 (10:14 +0100)]
nvmet: revert "nvmet: make discovery NQN configurable"
Revert commit 019eb8184fef ("nvmet: make discovery NQN configurable");
the interface was deemed incorrect and will be replaced with a different
one.
Fixes: 019eb8184fef ("nvmet: make discovery NQN configurable") Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
Eric Dumazet [Sat, 12 Mar 2022 23:29:58 +0000 (15:29 -0800)]
net/packet: fix slab-out-of-bounds access in packet_recvmsg()
syzbot found that when an AF_PACKET socket is using PACKET_COPY_THRESH
and mmap operations, tpacket_rcv() is queueing skbs with
garbage in skb->cb[], triggering a too big copy [1]
Presumably, users of af_packet using mmap() already gets correct
metadata from the mapped buffer, we can simply make sure
to clear 12 bytes that might be copied to user space later.
BUG: KASAN: stack-out-of-bounds in memcpy include/linux/fortify-string.h:225 [inline]
BUG: KASAN: stack-out-of-bounds in packet_recvmsg+0x56c/0x1150 net/packet/af_packet.c:3489
Write of size 165 at addr ffffc9000385fb78 by task syz-executor233/3631
Michael Walle [Sat, 12 Mar 2022 22:41:40 +0000 (23:41 +0100)]
net: mdio: mscc-miim: fix duplicate debugfs entry
This driver can have up to two regmaps. If the second one is registered
its debugfs entry will have the same name as the first one and the
following error will be printed:
[ 3.833521] debugfs: Directory 'e200413c.mdio' with parent 'regmap' already present!
Give the second regmap a name to avoid this.
Fixes: ec4bd430fec2 ("net: mdio: mscc-miim: convert to a regmap implementation") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220312224140.4173930-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is caused by mpt3sas_base_sync_reply_irqs() using an invalid reply_q
pointer outside of the list_for_each_entry() loop. At the end of the full
list traversal the pointer is invalid.
Move the _base_process_reply_queue() call inside of the loop.
Link: https://lore.kernel.org/r/d625deae-a958-0ace-2ba3-0888dd0a415b@ddn.com Fixes: 1e3ddfbb1455 ("scsi: mpt3sas: Postprocessing of target and LUN reset") Cc: stable@vger.kernel.org Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by: Matt Lupfer <mlupfer@ddn.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pavel Skripkin [Mon, 14 Mar 2022 05:56:32 +0000 (22:56 -0700)]
Input: aiptek - properly check endpoint type
Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. There was a check for the number of endpoints, but not
for the type of endpoint.
Fix it by replacing old desc.bNumEndpoints check with
usb_find_common_endpoints() helper for finding endpoints
Fail log:
usb 5-1: BOGUS urb xfer, pipe 1 != type 3
WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
Modules linked in:
CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Workqueue: usb_hub_wq hub_event
...
Call Trace:
<TASK>
aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830
input_open_device+0x1bb/0x320 drivers/input/input.c:629
kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593
Fixes: dec280780d3f ("Input: aiptek - fix crash on detecting device without endpoints") Reported-and-tested-by: syzbot+75cccf2b7da87fb6f84b@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20220308194328.26220-1-paskripkin@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The following patchset contains Netfilter fixes for net coming late
in the 5.17-rc process:
1) Revert port remap to mitigate shadowing service ports, this is causing
problems in existing setups and this mitigation can be achieved with
explicit ruleset, eg.
... tcp sport < 16386 tcp dport >= 32768 masquerade random
This patches provided a built-in policy similar to the one described above.
2) Disable register tracking infrastructure in nf_tables. Florian reported
two issues:
- Existing expressions with no implemented .reduce interface
that causes data-store on register should cancel the tracking.
- Register clobbering might be possible storing data on registers that
are larger than 32-bits.
This might lead to generating incorrect ruleset bytecode. These two
issues are scheduled to be addressed in the next release cycle.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: disable register tracking
Revert "netfilter: conntrack: tag conntracks picked up in local out hook"
Revert "netfilter: nat: force port remap to prevent shadowing well-known ports"
====================
Kurt Cancemi [Sat, 12 Mar 2022 20:15:13 +0000 (15:15 -0500)]
net: phy: marvell: Fix invalid comparison in the resume and suspend functions
This bug resulted in only the current mode being resumed and suspended when
the PHY supported both fiber and copper modes and when the PHY only supported
copper mode the fiber mode would incorrectly be attempted to be resumed and
suspended.
Fixes: bd1de38ec57a ("Marvell phy: add functions to suspend and resume both interfaces: fiber and copper links.") Signed-off-by: Kurt Cancemi <kurt@x64architecture.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220312201512.326047-1-kurt@x64architecture.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ming Lei [Mon, 14 Mar 2022 04:30:18 +0000 (12:30 +0800)]
block: release rq qos structures for queue without disk
blkcg_init_queue() may add rq qos structures to request queue, previously
blk_cleanup_queue() calls rq_qos_exit() to release them, but commit 7786af00b12a ("block: drain file system I/O on del_gendisk")
moves rq_qos_exit() into del_gendisk(), so memory leak is caused
because queues may not have disk, such as un-present scsi luns, nvme
admin queue, ...
Fixes the issue by adding rq_qos_exit() to blk_cleanup_queue() back.
BTW, v5.18 won't need this patch any more since we move
blkcg_init_queue()/blkcg_exit_queue() into disk allocation/release
handler, and patches have been in for-5.18/block.
Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org Fixes: 7786af00b12a ("block: drain file system I/O on del_gendisk") Reported-by: syzbot+b42749a851a47a0f581b@syzkaller.appspotmail.com Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220314043018.177141-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sabrina Dubroca [Thu, 10 Mar 2022 10:49:00 +0000 (11:49 +0100)]
esp6: fix check on ipv6_skip_exthdr's return value
Commit e2980f7adaa9 ("ipv6: check return value of ipv6_skip_exthdr")
introduced an incorrect check, which leads to all ESP packets over
either TCPv6 or UDPv6 encapsulation being dropped. In this particular
case, offset is negative, since skb->data points to the ESP header in
the following chain of headers, while skb->network_header points to
the IPv6 header:
IPv6 | ext | ... | ext | UDP | ESP | ...
That doesn't seem to be a problem, especially considering that if we
reach esp6_input_done2, we're guaranteed to have a full set of headers
available (otherwise the packet would have been dropped earlier in the
stack). However, it means that the return value will (intentionally)
be negative. We can make the test more specific, as the expected
return value of ipv6_skip_exthdr will be the (negated) size of either
a UDP header, or a TCP header with possible options.
In the future, we should probably either make ipv6_skip_exthdr
explicitly accept negative offsets (and adjust its return value for
error cases), or make ipv6_skip_exthdr only take non-negative
offsets (and audit all callers).
Fixes: e2980f7adaa9 ("ipv6: check return value of ipv6_skip_exthdr") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Brian Masney [Thu, 10 Mar 2022 23:24:59 +0000 (18:24 -0500)]
crypto: qcom-rng - ensure buffer for generate is completely filled
The generate function in struct rng_alg expects that the destination
buffer is completely filled if the function returns 0. qcom_rng_read()
can run into a situation where the buffer is partially filled with
randomness and the remaining part of the buffer is zeroed since
qcom_rng_generate() doesn't check the return value. This issue can
be reproduced by running the following from libkcapi:
The generated OUTFILE will have three huge sections that contain all
zeros, and this is caused by the code where the test
'val & PRNG_STATUS_DATA_AVAIL' fails.
Let's fix this issue by ensuring that qcom_rng_read() always returns
with a full buffer if the function returns success. Let's also have
qcom_rng_generate() return the correct value.
Here's some statistics from the ent project
(https://www.fourmilab.ch/random/) that shows information about the
quality of the generated numbers:
Optimum compression would reduce the size
of this 9000000 byte file by 2 percent.
Chi square distribution for 9000000 samples is 9329962.81, and
randomly would exceed this value less than 0.01 percent of the
times.
Arithmetic mean value of data bytes is 119.3731 (127.5 = random).
Monte Carlo value for Pi is 3.197293333 (error 1.77 percent).
Serial correlation coefficient is 0.159130 (totally uncorrelated =
0.0).
Without this patch, the results of the chi-square test is 0.01%, and
the numbers are certainly not random according to ent's project page.
The results improve with this patch:
Optimum compression would reduce the size
of this 9000000 byte file by 0 percent.
Chi square distribution for 9000000 samples is 258.77, and randomly
would exceed this value 42.24 percent of the times.
Arithmetic mean value of data bytes is 127.5006 (127.5 = random).
Monte Carlo value for Pi is 3.141277333 (error 0.01 percent).
Serial correlation coefficient is 0.000468 (totally uncorrelated =
0.0).
This change was tested on a Nexus 5 phone (msm8974 SoC).
Signed-off-by: Brian Masney <bmasney@redhat.com> Fixes: 27cf8a929790 ("crypto: qcom-rng - Add Qcom prng driver") Cc: stable@vger.kernel.org # 4.19+ Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Jocelyn Falempe [Tue, 8 Mar 2022 17:43:21 +0000 (18:43 +0100)]
drm/mgag200: Fix PLL setup for g200wb and g200ew
commit d6e562a9097a ("drm/mgag200: Split PLL setup into compute and
update functions") introduced a regression for g200wb and g200ew.
The PLLs are not set up properly, and VGA screen stays
black, or displays "out of range" message.
MGA1064_WB_PIX_PLLC_N/M/P was mistakenly replaced with
MGA1064_PIX_PLLC_N/M/P which have different addresses.
Linus Torvalds [Sun, 13 Mar 2022 17:36:38 +0000 (10:36 -0700)]
Merge tag 'x86_urgent_for_v5.17_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Free shmem backing storage for SGX enclave pages when those are
swapped back into EPC memory
- Prevent do_int3() from being kprobed, to avoid recursion
- Remap setup_data and setup_indirect structures properly when
accessing their members
- Correct the alternatives patching order for modules too
* tag 'x86_urgent_for_v5.17_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Free backing memory after faulting the enclave page
x86/traps: Mark do_int3() NOKPROBE_SYMBOL
x86/boot: Add setup_indirect support in early_memremap_is_setup_data()
x86/boot: Fix memremap of setup_indirect structures
x86/module: Fix the paravirt vs alternative order
Linus Torvalds [Sat, 12 Mar 2022 18:29:25 +0000 (10:29 -0800)]
Merge tag 'perf-tools-fixes-for-v5.17-2022-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix event parser error for hybrid systems
- Fix NULL check against wrong variable in 'perf bench' and in the
parsing code
- Update arm64 KVM headers from the kernel sources
- Sync cpufeatures header with the kernel sources
* tag 'perf-tools-fixes-for-v5.17-2022-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf parse: Fix event parser error for hybrid systems
perf bench: Fix NULL check against wrong variable
perf parse-events: Fix NULL check against wrong variable
tools headers cpufeatures: Sync with the kernel sources
tools kvm headers arm64: Update KVM headers from the kernel sources
projects / kernel.git / log