Jiri Kosina [Tue, 23 Feb 2021 10:30:01 +0000 (11:30 +0100)]
Merge branch 'for-5.12/core' into for-linus
- improved handling of generic HID keyboard (no more splitting system
and consumer controls away), in order to make it easier for userspace
to figure out the details of the device easier. From Dmitry Torokhov.
- report data sanitization fixes from Will McVicker and Randy Dunlap
Jason Gerecke [Tue, 16 Feb 2021 19:41:54 +0000 (11:41 -0800)]
HID: wacom: Ignore attempts to overwrite the touch_max value from HID
The `wacom_feature_mapping` function is careful to only set the the
touch_max value a single time, but this care does not extend to the
`wacom_wac_finger_event` function. In particular, if a device sends
multiple HID_DG_CONTACTMAX items in a single feature report, the
driver will end up retaining the value of last item.
The HID descriptor for the Cintiq Companion 2 does exactly this. It
incorrectly sets a "Report Count" of 2, which will cause the driver
to process two HID_DG_CONTACTCOUNT items. The first item has the actual
count, while the second item should have been declared as a constant
zero. The constant zero is the value the driver ends up using, however,
since it is the last HID_DG_CONTACTCOUNT in the report.
Report ID (16),
Usage (Contact Count Maximum), ; Contact count maximum (55h, static value)
Report Count (2),
Logical Maximum (10),
Feature (Variable),
To address this, we add a check that the touch_max is not already set
within the `wacom_wac_finger_event` function that processes the
HID_DG_TOUCHMAX item. We emit a warning if the value is set and ignore
the updated value.
This could potentially cause problems if there is a tablet which has
a similar issue but requires the last item to be used. This is unlikely,
however, since it would have to have a different non-zero value for
HID_DG_CONTACTMAX earlier in the same report, which makes no sense
except in the case of a firmware bug. Note that cases where the
HID_DG_CONTACTMAX items are in different reports is already handled
(and similarly ignored) by `wacom_feature_mapping` as mentioned above.
Link: https://github.com/linuxwacom/input-wacom/issues/223 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Hans de Goede [Sat, 6 Feb 2021 20:53:27 +0000 (21:53 +0100)]
HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch 10E
The Acer Aspire Switch 10E (SW3-016)'s keyboard-dock uses the same USB-ids
as the Acer One S1003 keyboard-dock. Yet they are not entirely the same:
1. The S1003 keyboard-dock has the same report descriptors as the
S1002 keyboard-dock (which has different USB-ids)
2. The Acer Aspire Switch 10E's keyboard-dock has different
report descriptors from the S1002/S1003 keyboard docks and it
sends 0x00880078 / 0x00880079 usage events when the touchpad is
toggled on/off (which is handled internally).
This means that all Acer kbd-docks handled by the hid-ite.c drivers
report their touchpad being toggled on/off through these custom
usage-codes with the exception of the S1003 dock, which likely is
a bug of that dock.
Add a QUIRK_TOUCHPAD_ON_OFF_REPORT quirk for the Aspire Switch 10E / S1003
usb-id so that the touchpad toggling will get reported to userspace on
the Aspire Switch 10E.
Since the Aspire Switch 10E's kbd-dock has different report-descriptors,
this also requires adding support for fixing those to ite_report_fixup().
Setting the quirk will also cause ite_report_fixup() to hit the
S1002/S1003 descriptors path on the S1003. Since the S1003 kbd-dock
never generates any input-reports for the fixed up part of the
descriptors this does not matter; and if there are versions out there
which do actually send input-reports for the touchpad-toggle then the
fixup should actually help to make things work.
This was tested on both an Acer Aspire Switch 10E and on an Acer One S1003.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Elia Devito [Fri, 22 Jan 2021 21:24:37 +0000 (22:24 +0100)]
HID: Ignore battery for Elan touchscreen on HP Spectre X360 15-df0xxx
Battery status is reported for the HP Spectre X360 Convertible 15-df0xxx
even if it does not have a battery. Prevent it to always report the
battery as low.
Filipe Laíns [Sat, 23 Jan 2021 18:02:20 +0000 (18:02 +0000)]
HID: logitech-dj: add support for the new lightspeed connection iteration
This new connection type is the new iteration of the Lightspeed
connection and will probably be used in some of the newer gaming
devices. It is currently use in the G Pro X Superlight.
This patch should be backported to older versions, as currently the
driver will panic when seing the unsupported connection. This isn't
an issue when using the receiver that came with the device, as Logitech
has been using different PIDs when they change the connection type, but
is an issue when using a generic receiver (well, generic Lightspeed
receiver), which is the case of the one in the Powerplay mat. Currently,
the only generic Ligthspeed receiver we support, and the only one that
exists AFAIK, is ther Powerplay.
As it stands, the driver will panic when seeing a G Pro X Superlight
connected to the Powerplay receiver and won't send any input events to
userspace! The kernel will warn about this so the issue should be easy
to identify, but it is still very worrying how hard it will fail :(
[915977.398471] logitech-djreceiver 0003:046D:C53A.0107: unusable device of type UNKNOWN (0x0f) connected on slot 1
Signed-off-by: Filipe Laíns <lains@riseup.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Filipe Laíns [Fri, 5 Feb 2021 14:34:44 +0000 (14:34 +0000)]
HID: logitech-dj: add support for keyboard events in eQUAD step 4 Gaming
In e400071a805d6229223a98899e9da8c6233704a1 I added support for the
receiver that comes with the G602 device, but unfortunately I screwed up
during testing and it seems the keyboard events were actually not being
sent to userspace.
This resulted in keyboard events being broken in userspace, please
backport the fix.
The receiver uses the normal 0x01 Logitech keyboard report descriptor,
as expected, so it is just a matter of flagging it as supported.
Reported in
https://github.com/libratbag/libratbag/issues/1124
Fixes: e400071a805d6 ("HID: logitech-dj: add the G602 receiver") Cc: <stable@vger.kernel.org> Signed-off-by: Filipe Laíns <lains@riseup.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Nicolas Boichat [Fri, 15 Jan 2021 05:42:16 +0000 (13:42 +0800)]
HID: google: Get HID report on probe to confirm tablet switch state
This forces reading the base folded state anytime the device is
probed, to make sure it's in sync.
This is useful after a reboot, if the device re-enumerates for
any reason (e.g. ESD shock), or if the driver is unbound/rebound
(debugging/testing).
Without this, the tablet switch state is only synchronized after a
key is pressed (since the device would then send a report that
includes the switch state), leading to strange UX (e.g. UI
mode changes when a key is pressed after reboot).
This is not a problem on detachable base attach, as the device,
by itself, sends a report after it is booted up.
Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Dmitry Torokhov [Thu, 14 Jan 2021 06:24:13 +0000 (22:24 -0800)]
HID: hid-input: avoid splitting keyboard, system and consumer controls
A typical USB keyboard usually splits its keys into several reports:
- one for the basic alphanumeric keys, modifier keys, F<n> keys, six pack
keys and keypad. This report's application is normally listed as
GenericDesktop.Keyboard
- a GenericDesktop.SystemControl report for the system control keys, such
as power and sleep
- Consumer.ConsumerControl report for multimedia (forward, rewind,
play/pause, mute, etc) and other extended keys.
- additional output, vendor specific, and feature reports
Splitting each report into a separate input device is wasteful and even
hurts userspace as it makes it harder to determine the true capabilities
(set of available keys) of a keyboard, so let's adjust application
matching to merge system control and consumer control reports with
keyboard report, if one has already been processed.
Linus Torvalds [Thu, 28 Jan 2021 17:18:05 +0000 (09:18 -0800)]
Merge tag 'media/v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- a V4L2 core regression at videobuf2 when checking for single-plane
dmabuf
- a change at uAPI header v4l2-subdev.h, fixing a breakage as BIT()
macro is not available in userspace
- fix some regressions at RC core due to the usage of microseconds
everywhere on it
- a fix for a race condition at RC core
- a rename on a newly-introduced kAPI symbol (v4l2_get_link_rate),
currently used only by a single driver
- Regression fixes for rcar-vin, cedrus, ite-cir, hantro, css, venus,
and cec drivers.
* tag 'media/v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: hantro: Fix reset_raw_fmt initialization
media: cec: add stm32 driver
media: cedrus: Fix H264 decoding
media: v4l2-subdev.h: BIT() is not available in userspace
media: Revert "media: videobuf2: Fix length check for single plane dmabuf queueing"
media: rc: ite-cir: fix min_timeout calculation
media: venus: core: Fix platform driver shutdown
media: rc: fix timeout handling after switch to microsecond durations
media: v4l: common: Fix naming of v4l2_get_link_rate
media: rcar-vin: fix return, use ret instead of zero
media: ccs: Get static data version minor correctly
media: ccs-pll: Fix link frequency for C-PHY
media: rc: ensure that uevent can be read directly after rc device register
Linus Torvalds [Thu, 28 Jan 2021 17:14:58 +0000 (09:14 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"A handful of clk driver fixes:
- Build fix for CONFIG_PM=n in the mmp2 driver
- Kconfig warning for unmet dependencies in the i.MX driver
- Make the camera AHB clk always be enabled on qcom sc7180
- Use rate round down semantics for qcom sm8250 SD clks"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: mmp2: fix build without CONFIG_PM
clk: qcom: gcc-sm250: Use floor ops for sdcc clks
clk: imx: fix Kconfig warning for i.MX SCU clk
clk: qcom: gcc-sc7180: Mark the camera abh clock always ON
Linus Torvalds [Thu, 28 Jan 2021 17:06:52 +0000 (09:06 -0800)]
Merge tag 'sound-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Although the incoming fixes haven't settled down yet, all changes here
are small and mostly device-specific fixes, so nothing look worrisome.
- Yet another USB-audio regression fixes
- HD-audio ID fix and device-specific quirks
- SOF Intel / SoundWire fixes including topology
- ASoC Qualcomm and Mediatek fixes"
* tag 'sound-5.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda/via: Apply the workaround generically for Clevo machines
ASoC: Intel: sof_sdw: set proper flags for Dell TGL-H SKU 0A5E
ASoC: qcom: lpass: Fix out-of-bounds DAI ID lookup
ASoC: mediatek: mt8192-mt6359: add format constraints for RT5682
ASoC: ak4458: correct reset polarity
ASoC: SOF: SND_INTEL_DSP_CONFIG dependency
ASoC: SOF: Intel: soundwire: fix select/depend unmet dependencies
ALSA: hda: intel-dsp-config: add PCI id for TGL-H
ALSA: usb-audio: workaround for iface reset issue
ALSA: pcm: One more dependency for hw constraints
ALSA: hda/realtek: Enable headset of ASUS B1400CEPE with ALC256
ASoC: Intel: Skylake: Zero snd_ctl_elem_value
ASoC: Intel: Skylake: skl-topology: Fix OOPs ib skl_tplg_complete
ASoC: qcom: Fix number of HDMI RDMA channels on sc7180
ASoC: mediatek: mt8183-da7219: ignore TDM DAI link by default
ASoC: mediatek: mt8183-mt6358: ignore TDM DAI link by default
ASoC: topology: Properly unregister DAI on removal
ASoC: topology: Fix memory corruption in soc_tplg_denum_create_values()
ASoC: qcom: lpass-ipq806x: fix bitwidth regmap field
ASoC: AMD Renoir - refine DMI entries for some Lenovo products
...
Linus Torvalds [Wed, 27 Jan 2021 19:06:15 +0000 (11:06 -0800)]
Merge branch 'parisc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"Two small fixes:
- Fix linking error with 64-bit kernel when modules are disabled,
reported by kernel test robot
- Remove leftover reference to power_tasklet, by Davidlohr Bueso"
* 'parisc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Enable -mlong-calls gcc option by default when !CONFIG_MODULES
parisc: Remove leftover reference to the power_tasklet
Remove the magical "repo-abbrev" comment added when this file was
introduced in e0ab1ec9fcd3 ([PATCH] add .mailmap for proper
git-shortlog output, 2007-02-14).
It's been an undocumented feature of git-shortlog(1), originally added
to git for Linus's use. Since then he's no longer using it[1], and
I've removed the feature in git.git's 4e168333a87 (shortlog: remove
unused(?) "repo-abbrev" feature, 2021-01-12). It's on the "master"
branch, but not yet in a release version.
Let's also remove it from linux.git, both as a heads-up to any
potential users of it in linux.git whose use would be broken sooner
than later by git itself, and because it'll eventually be entirely
redundant.
Helge Deller [Tue, 26 Jan 2021 19:16:21 +0000 (20:16 +0100)]
parisc: Enable -mlong-calls gcc option by default when !CONFIG_MODULES
When building a kernel without module support, the CONFIG_MLONGCALL option
needs to be enabled in order to reach symbols which are outside of a 22-bit
branch.
This patch changes the autodetection in the Kconfig script to always enable
CONFIG_MLONGCALL when modules are disabled and uses a far call to
preempt_schedule_irq() in intr_do_preempt() to reach the symbol in all cases.
Linus Torvalds [Tue, 26 Jan 2021 19:10:14 +0000 (11:10 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- x86 bugfixes
- Documentation fixes
- Avoid performance regression due to SEV-ES patches
- ARM:
- Don't allow tagged pointers to point to memslots
- Filter out ARMv8.1+ PMU events on v8.0 hardware
- Hide PMU registers from userspace when no PMU is configured
- More PMU cleanups
- Don't try to handle broken PSCI firmware
- More sys_reg() to reg_to_encoding() conversions
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: allow KVM_REQ_GET_NESTED_STATE_PAGES outside guest mode for VMX
KVM: x86: Revert "KVM: x86: Mark GPRs dirty when written"
KVM: SVM: Unconditionally sync GPRs to GHCB on VMRUN of SEV-ES guest
KVM: nVMX: Sync unsync'd vmcs02 state to vmcs12 on migration
kvm: tracing: Fix unmatched kvm_entry and kvm_exit events
KVM: Documentation: Update description of KVM_{GET,CLEAR}_DIRTY_LOG
KVM: x86: get smi pending status correctly
KVM: x86/pmu: Fix HW_REF_CPU_CYCLES event pseudo-encoding in intel_arch_events[]
KVM: x86/pmu: Fix UBSAN shift-out-of-bounds warning in intel_pmu_refresh()
KVM: x86: Add more protection against undefined behavior in rsvd_bits()
KVM: Documentation: Fix spec for KVM_CAP_ENABLE_CAP_VM
KVM: Forbid the use of tagged userspace addresses for memslots
KVM: arm64: Filter out v8.1+ events on v8.0 HW
KVM: arm64: Compute TPIDR_EL2 ignoring MTE tag
KVM: arm64: Use the reg_to_encoding() macro instead of sys_reg()
KVM: arm64: Allow PSCI SYSTEM_OFF/RESET to return
KVM: arm64: Simplify handling of absent PMU system registers
KVM: arm64: Hide PMU registers from userspace when not available
Linus Torvalds [Tue, 26 Jan 2021 18:59:01 +0000 (10:59 -0800)]
Merge tag 'regulator-fix-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"The main thing here is a change to make sure that we don't try to
double resolve the supply of a regulator if we have two probes going
on simultaneously, plus an incremental fix on top of that to resolve a
lockdep issue it introduced.
There's also a patch from Dmitry Osipenko adding stubs for some
functions to avoid build issues in consumers in some configurations"
* tag 'regulator-fix-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Fix lockdep warning resolving supplies
regulator: consumer: Add missing stubs to regulator/consumer.h
regulator: core: avoid regulator_resolve_supply() race condition
Jernej Skrabec [Wed, 23 Dec 2020 11:06:59 +0000 (12:06 +0100)]
media: cedrus: Fix H264 decoding
During H264 API overhaul subtle bug was introduced Cedrus driver.
Progressive references have both, top and bottom reference flags set.
Cedrus reference list expects only bottom reference flag and only when
interlaced frames are decoded. However, due to a bug in Cedrus check,
exclusivity is not tested and that flag is set also for progressive
references. That causes "jumpy" background with many videos.
Fix that by checking that only bottom reference flag is set in control
and nothing else.
Takashi Iwai [Tue, 26 Jan 2021 16:56:03 +0000 (17:56 +0100)]
ALSA: hda/via: Apply the workaround generically for Clevo machines
We've got another report indicating a similar problem wrt the
power-saving behavior with VIA codec on Clevo machines. Let's apply
the existing workaround generically to all Clevo devices with VIA
codecs to cover all in once.
Randy Dunlap [Tue, 19 Jan 2021 20:07:23 +0000 (12:07 -0800)]
HID: correct kernel-doc notation in hid-quirks.c
Use correct kernel-doc notation for functions.
Add notation (comments) where it is missing.
Use the documented "Return:" notation for function return values.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: linux-input@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Randy Dunlap [Tue, 19 Jan 2021 20:07:22 +0000 (12:07 -0800)]
HID: correct kernel-doc notation in <linux/hid*.h>
Correct kernel-doc notation in HID header files (include/linux/hid*.h).
Add notation (comments) where it is missing.
Use the documented "Return:" notation for function return values.
Fix a few typos/spellos.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: linux-input@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Jason Gerecke [Thu, 21 Jan 2021 18:46:49 +0000 (10:46 -0800)]
HID: wacom: Correct NULL dereference on AES pen proximity
The recent commit to fix a memory leak introduced an inadvertant NULL
pointer dereference. The `wacom_wac->pen_fifo` variable was never
intialized, resuling in a crash whenever functions tried to use it.
Since the FIFO is only used by AES pens (to buffer events from pen
proximity until the hardware reports the pen serial number) this would
have been easily overlooked without testing an AES device.
This patch converts `wacom_wac->pen_fifo` over to a pointer (since the
call to `devres_alloc` allocates memory for us) and ensures that we assign
it to point to the allocated and initalized `pen_fifo` before the function
returns.
Paolo Bonzini [Fri, 8 Jan 2021 16:43:08 +0000 (11:43 -0500)]
KVM: x86: allow KVM_REQ_GET_NESTED_STATE_PAGES outside guest mode for VMX
VMX also uses KVM_REQ_GET_NESTED_STATE_PAGES for the Hyper-V eVMCS,
which may need to be loaded outside guest mode. Therefore we cannot
WARN in that case.
However, that part of nested_get_vmcs12_pages is _not_ needed at
vmentry time. Split it out of KVM_REQ_GET_NESTED_STATE_PAGES handling,
so that both vmentry and migration (and in the latter case, independent
of is_guest_mode) do the parts that are needed.
KVM: x86: Revert "KVM: x86: Mark GPRs dirty when written"
Revert the dirty/available tracking of GPRs now that KVM copies the GPRs
to the GHCB on any post-VMGEXIT VMRUN, even if a GPR is not dirty. Per
commit de3cd117ed2f ("KVM: x86: Omit caching logic for always-available
GPRs"), tracking for GPRs noticeably impacts KVM's code footprint.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210122235049.3107620-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SVM: Unconditionally sync GPRs to GHCB on VMRUN of SEV-ES guest
Drop the per-GPR dirty checks when synchronizing GPRs to the GHCB, the
GRPs' dirty bits are set from time zero and never cleared, i.e. will
always be seen as dirty. The obvious alternative would be to clear
the dirty bits when appropriate, but removing the dirty checks is
desirable as it allows reverting GPR dirty+available tracking, which
adds overhead to all flavors of x86 VMs.
Note, unconditionally writing the GPRs in the GHCB is tacitly allowed
by the GHCB spec, which allows the hypervisor (or guest) to provide
unnecessary info; it's the guest's responsibility to consume only what
it needs (the hypervisor is untrusted after all).
The guest and hypervisor can supply additional state if desired but
must not rely on that additional state being provided.
Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Fixes: 291bd20d5d88 ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT") Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210122235049.3107620-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Maxim Levitsky [Thu, 14 Jan 2021 20:54:47 +0000 (22:54 +0200)]
KVM: nVMX: Sync unsync'd vmcs02 state to vmcs12 on migration
Even when we are outside the nested guest, some vmcs02 fields
may not be in sync vs vmcs12. This is intentional, even across
nested VM-exit, because the sync can be delayed until the nested
hypervisor performs a VMCLEAR or a VMREAD/VMWRITE that affects those
rarely accessed fields.
However, during KVM_GET_NESTED_STATE, the vmcs12 has to be up to date to
be able to restore it. To fix that, call copy_vmcs02_to_vmcs12_rare()
before the vmcs12 contents are copied to userspace.
Fixes: 7952d769c29ca ("KVM: nVMX: Sync rarely accessed guest fields only when needed") Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210114205449.8715-2-mlevitsk@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Lorenzo Brescia [Wed, 23 Dec 2020 14:45:07 +0000 (14:45 +0000)]
kvm: tracing: Fix unmatched kvm_entry and kvm_exit events
On VMX, if we exit and then re-enter immediately without leaving
the vmx_vcpu_run() function, the kvm_entry event is not logged.
That means we will see one (or more) kvm_exit, without its (their)
corresponding kvm_entry, as shown here:
It also seems possible for a kvm_entry event to be logged, but then
we leave vmx_vcpu_run() right away (if vmx->emulation_required is
true). In this case, we will have a spurious kvm_entry event in the
trace.
Fix these situations by moving trace_kvm_entry() inside vmx_vcpu_run()
(where trace_kvm_exit() already is).
A trace obtained with this patch applied looks like this:
call kvm_vcpu_ioctl_smi() and
kvm_make_request(KVM_REQ_SMI, vcpu);
Step2:
kvm_vcpu_ioctl(cpu, KVM_RUN, 0)
call process_smi() if
kvm_check_request(KVM_REQ_SMI, vcpu) is
true, mark vcpu->arch.smi_pending = true;
The vcpu->arch.smi_pending will be set true in step2, unfortunately if
vcpu paused between step1 and step2, the kvm_run->immediate_exit will be
set and vcpu has to exit to Qemu immediately during step2 before mark
vcpu->arch.smi_pending true.
During VM migration, Qemu will get the smi pending status from KVM using
KVM_GET_VCPU_EVENTS ioctl at the downtime, then the smi pending status
will be lost.
Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com> Signed-off-by: Shengen Zhuang <zhuangshengen@huawei.com>
Message-Id: <20210118084720.1585-1-jianjay.zhou@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Like Xu [Mon, 18 Jan 2021 02:58:00 +0000 (10:58 +0800)]
KVM: x86/pmu: Fix UBSAN shift-out-of-bounds warning in intel_pmu_refresh()
Since we know vPMU will not work properly when (1) the guest bit_width(s)
of the [gp|fixed] counters are greater than the host ones, or (2) guest
requested architectural events exceeds the range supported by the host, so
we can setup a smaller left shift value and refresh the guest cpuid entry,
thus fixing the following UBSAN shift-out-of-bounds warning:
shift exponent 197 is too large for 64-bit type 'long long unsigned int'
KVM: x86: Add more protection against undefined behavior in rsvd_bits()
Add compile-time asserts in rsvd_bits() to guard against KVM passing in
garbage hardcoded values, and cap the upper bound at '63' for dynamic
values to prevent generating a mask that would overflow a u64.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210113204515.3473079-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 25 Jan 2021 23:52:01 +0000 (18:52 -0500)]
Merge tag 'kvmarm-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.11, take #2
- Don't allow tagged pointers to point to memslots
- Filter out ARMv8.1+ PMU events on v8.0 hardware
- Hide PMU registers from userspace when no PMU is configured
- More PMU cleanups
- Don't try to handle broken PSCI firmware
- More sys_reg() to reg_to_encoding() conversions
Johannes Berg [Mon, 25 Jan 2021 09:16:15 +0000 (10:16 +0100)]
fs/pipe: allow sendfile() to pipe again
After commit 36e2c7421f02 ("fs: don't allow splice read/write
without explicit ops") sendfile() could no longer send data
from a real file to a pipe, breaking for example certain cgit
setups (e.g. when running behind fcgiwrap), because in this
case cgit will try to do exactly this: sendfile() to a pipe.
Fix this by using iter_file_splice_write for the splice_write
method of pipes, as suggested by Christoph.
Cc: stable@vger.kernel.org Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sami Tolvanen [Mon, 25 Jan 2021 19:09:25 +0000 (11:09 -0800)]
Commit 9bb48c82aced ("tty: implement write_iter") converted the tty
layer to use write_iter. Fix the redirected_tty_write declaration
also in n_tty and change the comparisons to use write_iter instead of
write.
[ Also moved the declaration of redirected_tty_write() to the proper
location in a header file. The reason for the bug was the bogus extern
declaration in n_tty.c silently not matching the changed definition in
tty_io.c, and because it wasn't in a shared header file, there was no
cross-checking of the declaration.
Sami noticed because Clang's Control Flow Integrity checking ended up
incidentally noticing the inconsistent declaration. - Linus ]
Linus Torvalds [Mon, 25 Jan 2021 18:19:40 +0000 (10:19 -0800)]
Merge tag 'printk-for-5.11-urgent-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
"The fix of a potential buffer overflow in 5.11-rc5 introduced another
one. The trailing '\0' might be written up to the message "len" past
the buffer. Fortunately, it is not that easy to hit.
Most readers use 1kB buffers for a single message. Typical messages
fit into the temporary buffer with enough reserve.
Also readers do not rely on the '\0'. It is related to the previous
fix. Some readers required the space for the trailing '\0'. We decided
to write it there to avoid such regressions in the future.
The most realistic victims are dumpers using kmsg_dump_get_buffer().
They are filling the entire buffer with as many messages as possible.
They are typically used when handling panic()"
* tag 'printk-for-5.11-urgent-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: fix string termination for record_print_text()
Mark Brown [Mon, 25 Jan 2021 14:15:12 +0000 (14:15 +0000)]
Merge series "ASoC: SOF: partial fix to Kconfig issues" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
We've had several reports of broken dependencies. The 'right' fix is
to revisit the module dependencies as suggested by Arnd Bergmann. This
is WIP at https://github.com/thesofproject/linux/pull/2683. Since this
is taking longer than expected, I am only sharing quick fixes for now.
Libin Yang [Mon, 25 Jan 2021 08:11:17 +0000 (10:11 +0200)]
ASoC: Intel: sof_sdw: set proper flags for Dell TGL-H SKU 0A5E
Add flag "SOF_RT711_JD_SRC_JD2", flag "SOF_RT715_DAI_ID_FIX"
and "SOF_SDW_FOUR_SPK" to the Dell TGL-H based SKU "0A5E".
Signed-off-by: Libin Yang <libin.yang@intel.com> Co-developed-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Hui Wang <hui.wang@canonical.com> Reviewed-by: Bard Liao <bard.liao@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20210125081117.814488-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
Stephan Gerhold [Mon, 25 Jan 2021 10:44:42 +0000 (11:44 +0100)]
ASoC: qcom: lpass: Fix out-of-bounds DAI ID lookup
The "dai_id" given into LPAIF_INTFDMA_REG(...) is already the real
DAI ID, not an index into v->dai_driver. Looking it up again seems
entirely redundant.
For IPQ806x (and SC7180 since commit 09a4f6f5d21c
("ASoC: dt-bindings: lpass: Fix and common up lpass dai ids") this is
now often an out-of-bounds read because the indexes in the "dai_driver"
array no longer match the actual DAI ID.
Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: 7cb37b7bd0d3 ("ASoC: qcom: Add support for lpass hdmi driver") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210125104442.135899-1-stephan@gerhold.net Signed-off-by: Mark Brown <broonie@kernel.org>
Tzung-Bi Shih [Mon, 25 Jan 2021 06:14:53 +0000 (14:14 +0800)]
ASoC: mediatek: mt8192-mt6359: add format constraints for RT5682
MT8192 determines the I2S clock rates according to the sampling rates.
There is only 1 set of I2S in between MT8192 and RT5682. If playing and
capturing via RT5682 in different sampling rates, the I2S data will be
corrupted.
Adds format constraints to the corresponding DAI links to make sure the
sampling rates are symmetric.
The sof-pci-dev driver fails to link when built into the kernel
and CONFIG_SND_INTEL_DSP_CONFIG is set to =m:
arm-linux-gnueabi-ld: sound/soc/sof/sof-pci-dev.o: in function `sof_pci_probe':
sof-pci-dev.c:(.text+0x1c): undefined reference to `snd_intel_dsp_driver_probe'
As a temporary fix, use IS_REACHABLE to prevent the problem from
happening. A more complete solution is to move this code to
Intel-specific parts, restructure the drivers and Kconfig as discussed
with Arnd Bergmann and Takashi Iwai.
This comes from having tristates being configured independently, when
in practice the CONFIG_SOUNDWIRE needs to be aligned with the SOF
choices: when the SOF code is compiled as built-in, the
CONFIG_SOUNDWIRE also needs to be 'y'.
The easiest fix is to replace the 'depends' with a 'select' and have a
single user selection to activate SoundWire on Intel platforms. This
still allows regmap to be compiled independently as a module.
This is just a temporary fix, the select/depend usage will be
revisited and the SOF Kconfig re-organized, as suggested by Arnd
Bergman.
John Ogness [Sun, 24 Jan 2021 20:27:28 +0000 (21:33 +0106)]
printk: fix string termination for record_print_text()
Commit f0e386ee0c0b ("printk: fix buffer overflow potential for
print_text()") added string termination in record_print_text().
However it used the wrong base pointer for adding the terminator.
This led to a 0-byte being written somewhere beyond the buffer.
Use the correct base pointer when adding the terminator.
Fixes: f0e386ee0c0b ("printk: fix buffer overflow potential for print_text()") Reported-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210124202728.4718-1-john.ogness@linutronix.de
Kai-Heng Feng [Mon, 18 Jan 2021 13:45:23 +0000 (21:45 +0800)]
HID: multitouch: Apply MT_QUIRK_CONFIDENCE quirk for multi-input devices
Palm ejection stops working on some Elan and Synaptics touchpad after
commit 40d5bb87377a ("HID: multitouch: enable multi-input as a quirk for
some devices").
The commit changes the mt_class from MT_CLS_WIN_8 to
MT_CLS_WIN_8_FORCE_MULTI_INPUT, so MT_QUIRK_CONFIDENCE isn't applied
anymore.
So also apply the quirk since MT_CLS_WIN_8_FORCE_MULTI_INPUT is
essentially MT_CLS_WIN_8.
Fixes: 40d5bb87377a ("HID: multitouch: enable multi-input as a quirk for some devices") Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Linus Torvalds [Sun, 24 Jan 2021 20:30:14 +0000 (12:30 -0800)]
Merge tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Still need a final cancelation fix that isn't quite done done,
expected in the next day or two. That said, this contains:
- Wakeup fix for IOPOLL requests
- SQPOLL split close op handling fix
- Ensure that any use of io_uring fd itself is marked as inflight
- Short non-regular file read fix (Pavel)
- Fix up bad false positive warning (Pavel)
- SQPOLL fixes (Pavel)
- In-flight removal fix (Pavel)"
* tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
io_uring: account io_uring internal files as REQ_F_INFLIGHT
io_uring: fix sleeping under spin in __io_clean_op
io_uring: fix short read retries for non-reg files
io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state
io_uring: fix skipping disabling sqo on exec
io_uring: fix uring_flush in exit_files() warning
io_uring: fix false positive sqo warning on flush
io_uring: iopoll requests should also wake task ->in_idle state
Linus Torvalds [Sun, 24 Jan 2021 20:24:35 +0000 (12:24 -0800)]
Merge tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- fix a status code in nvmet (Chaitanya Kulkarni)
- avoid double completions in nvme-rdma/nvme-tcp (Chao Leng)
- fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen)
- fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar)
- fix a double DMA unmap in nvme-pci
* tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
lightnvm: fix memory leak when submit fails
nvme-pci: fix error unwind in nvme_map_data
nvme-pci: refactor nvme_unmap_data
md: Set prev_flush_start and flush_bio in an atomic way
nvmet: set right status on error in id-ns handler
nvme-pci: allow use of cmb on v1.4 controllers
nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout
nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout
nvme: check the PRINFO bit before deciding the host buffer length
Linus Torvalds [Sun, 24 Jan 2021 20:16:34 +0000 (12:16 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"18 patches.
Subsystems affected by this patch series: mm (pagealloc, memcg, kasan,
memory-failure, and highmem), ubsan, proc, and MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: add a couple more files to the Clang/LLVM section
proc_sysctl: fix oops caused by incorrect command parameters
powerpc/mm/highmem: use __set_pte_at() for kmap_local()
mips/mm/highmem: use set_pte() for kmap_local()
mm/highmem: prepare for overriding set_pte_at()
sparc/mm/highmem: flush cache and TLB
mm: fix page reference leak in soft_offline_page()
ubsan: disable unsigned-overflow check for i386
kasan, mm: fix resetting page_alloc tags for HW_TAGS
kasan, mm: fix conflicts with init_on_alloc/free
kasan: fix HW_TAGS boot parameters
kasan: fix incorrect arguments passing in kasan_add_zero_shadow
kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow
mm: fix numa stats for thp migration
mm: memcg: fix memcg file_dirty numa stat
mm: memcg/slab: optimize objcg stock draining
mm: fix initialization of struct page for holes in memory layout
x86/setup: don't remove E820_TYPE_RAM for pfn 0
Linus Torvalds [Sun, 24 Jan 2021 19:26:46 +0000 (11:26 -0800)]
Merge tag 'char-misc-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.11-rc5:
- habanalabs driver fixes
- phy driver fixes
- hwtracing driver fixes
- rtsx cardreader driver fix
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx: init value of aspm_enabled
habanalabs: disable FW events on device removal
habanalabs: fix backward compatibility of idle check
habanalabs: zero pci counters packet before submit to FW
intel_th: pci: Add Alder Lake-P support
stm class: Fix module init return on allocation failure
habanalabs: prevent soft lockup during unmap
habanalabs: fix reset process in case of failures
habanalabs: fix dma_addr passed to dma_mmap_coherent
phy: mediatek: allow compile-testing the dsi phy
phy: cpcap-usb: Fix warning for missing regulator_disable
PHY: Ingenic: fix unconditional build of phy-ingenic-usb
Linus Torvalds [Sun, 24 Jan 2021 19:02:01 +0000 (11:02 -0800)]
Merge tag 'staging-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are some IIO driver fixes for 5.11-rc5 to resolve some reported
problems.
Nothing major, just a few small fixes, all of these have been in
linux-next for a while and full details are in the shortlog"
* tag 'staging-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
iio: ad5504: Fix setting power-down state
counter:ti-eqep: remove floor
drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
iio: sx9310: Off by one in sx9310_read_thresh()
Linus Torvalds [Sun, 24 Jan 2021 18:56:45 +0000 (10:56 -0800)]
Merge tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are three small tty/serial fixes for 5.11-rc5 to resolve reported
problems:
- two patches to fix up writing to ttys with splice
- mvebu-uart driver fix for reported problem
All of these have been in linux-next with no reported problems"
* tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: fix up hung_up_tty_write() conversion
tty: implement write_iter
serial: mvebu-uart: fix tx lost characters at power off
Linus Torvalds [Sun, 24 Jan 2021 18:54:54 +0000 (10:54 -0800)]
Merge tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.11-rc5. They resolve:
- xhci issues for some reported problems
- ehci driver issue for one specific device
- USB gadget fixes for some reported problems
- cdns3 driver fixes for issues reported
- MAINTAINERS file update
- thunderbolt minor fix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: bdc: Make bdc pci driver depend on BROKEN
xhci: tegra: Delay for disabling LFPS detector
xhci: make sure TRB is fully written before giving it to the controller
usb: udc: core: Use lock when write to soft_connect
USB: gadget: dummy-hcd: Fix errors in port-reset handling
usb: gadget: aspeed: fix stop dma register setting.
USB: ehci: fix an interrupt calltrace error
ehci: fix EHCI host controller initialization sequence
MAINTAINERS: update Peter Chen's email address
thunderbolt: Drop duplicated 0x prefix from format string
MAINTAINERS: Update address for Cadence USB3 driver
usb: cdns3: imx: improve driver .remove API
usb: cdns3: imx: fix can't create core device the second time issue
usb: cdns3: imx: fix writing read-only memory issue
Xiaoming Ni [Sun, 24 Jan 2021 05:02:16 +0000 (21:02 -0800)]
proc_sysctl: fix oops caused by incorrect command parameters
The process_sysctl_arg() does not check whether val is empty before
invoking strlen(val). If the command line parameter () is incorrectly
configured and val is empty, oops is triggered.
For example:
"hung_task_panic=1" is incorrectly written as "hung_task_panic", oops is
triggered. The call stack is as follows:
Kernel command line: .... hung_task_panic
......
Call trace:
__pi_strlen+0x10/0x98
parse_args+0x278/0x344
do_sysctl_args+0x8c/0xfc
kernel_init+0x5c/0xf4
ret_from_fork+0x10/0x30
To fix it, check whether "val" is empty when "phram" is a sysctl field.
Error codes are returned in the failure branch, and error logs are
generated by parse_args().
Link: https://lkml.kernel.org/r/20210118133029.28580-1-nixiaoming@huawei.com Fixes: 3db978d480e2843 ("kernel/sysctl: support setting sysctl parameters from kernel command line") Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> [5.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Gleixner [Sun, 24 Jan 2021 05:02:11 +0000 (21:02 -0800)]
powerpc/mm/highmem: use __set_pte_at() for kmap_local()
The original PowerPC highmem mapping function used __set_pte_at() to
denote that the mapping is per CPU. This got lost with the conversion
to the generic implementation.
Override the default map function.
Link: https://lkml.kernel.org/r/20210112170411.281464308@linutronix.de Fixes: 47da42b27a56 ("powerpc/mm/highmem: Switch to generic kmap atomic") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Gleixner [Sun, 24 Jan 2021 05:02:02 +0000 (21:02 -0800)]
mm/highmem: prepare for overriding set_pte_at()
The generic kmap_local() map function uses set_pte_at(), but MIPS requires
set_pte() and PowerPC wants __set_pte_at().
Provide arch_kmap_local_set_pte() and default it to set_pte_at().
Link: https://lkml.kernel.org/r/20210112170411.056306194@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Sun, 24 Jan 2021 05:01:52 +0000 (21:01 -0800)]
mm: fix page reference leak in soft_offline_page()
The conversion to move pfn_to_online_page() internal to
soft_offline_page() missed that the get_user_pages() reference taken by
the madvise() path needs to be dropped when pfn_to_online_page() fails.
Note the direct sysfs-path to soft_offline_page() does not perform a
get_user_pages() lookup.
When soft_offline_page() is handed a pfn_valid() && !pfn_to_online_page()
pfn the kernel hangs at dax-device shutdown due to a leaked reference.
Link: https://lkml.kernel.org/r/161058501210.1840162.8108917599181157327.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: feec24a6139d ("mm, soft-offline: convert parameter to pfn") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Qian Cai <cai@lca.pw> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Konovalov [Sun, 24 Jan 2021 05:01:43 +0000 (21:01 -0800)]
kasan, mm: fix resetting page_alloc tags for HW_TAGS
A previous commit added resetting KASAN page tags to
kernel_init_free_pages() to avoid false-positives due to accesses to
metadata with the hardware tag-based mode.
That commit did reset page tags before the metadata access, but didn't
restore them after. As the result, KASAN fails to detect bad accesses
to page_alloc allocations on some configurations.
Fix this by recovering the tag after the metadata access.
Link: https://lkml.kernel.org/r/02b5bcd692e912c27d484030f666b350ad7e4ae4.1611074450.git.andreyknvl@google.com Fixes: aa1ef4d7b3f6 ("kasan, mm: reset tags when accessing metadata") Signed-off-by: Andrey Konovalov <andreyknvl@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Marco Elver <elver@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Branislav Rankov <Branislav.Rankov@arm.com> Cc: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrey Konovalov [Sun, 24 Jan 2021 05:01:38 +0000 (21:01 -0800)]
kasan, mm: fix conflicts with init_on_alloc/free
A few places where SLUB accesses object's data or metadata were missed
in a previous patch. This leads to false positives with hardware
tag-based KASAN when bulk allocations are used with init_on_alloc/free.
Fix the false-positives by resetting pointer tags during these accesses.
(The kasan_reset_tag call is removed from slab_alloc_node, as it's added
into maybe_wipe_obj_freeptr.)
Andrey Konovalov [Sun, 24 Jan 2021 05:01:34 +0000 (21:01 -0800)]
kasan: fix HW_TAGS boot parameters
The initially proposed KASAN command line parameters are redundant.
This change drops the complex "kasan.mode=off/prod/full" parameter and
adds a simpler kill switch "kasan=off/on" instead. The new parameter
together with the already existing ones provides a cleaner way to
express the same set of features.
The full set of parameters with this change:
kasan=off/on - whether KASAN is enabled
kasan.fault=report/panic - whether to only print a report or also panic
kasan.stacktrace=off/on - whether to collect alloc/free stack traces
Lecopzer Chen [Sun, 24 Jan 2021 05:01:25 +0000 (21:01 -0800)]
kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow
During testing kasan_populate_early_shadow and kasan_remove_zero_shadow,
if the shadow start and end address in kasan_remove_zero_shadow() is not
aligned to PMD_SIZE, the remain unaligned PTE won't be removed.
0xffffffbf80000000 ~ 0xffffffbfbdf80000 will not be removed because in
kasan_remove_pud_table(), kasan_pmd_table(*pud) is true but the next
address is 0xffffffbfbdf80000 which is not aligned to PUD_SIZE.
In the correct condition, this should fallback to the next level
kasan_remove_pmd_table() but the condition flow always continue to skip
the unaligned part.
Fix by correcting the condition when next and addr are neither aligned.
Link: https://lkml.kernel.org/r/20210103135621.83129-1-lecopzer@gmail.com Fixes: 0207df4fa1a86 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN") Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: YJ Chiang <yj.chiang@mediatek.com> Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 24 Jan 2021 18:17:03 +0000 (10:17 -0800)]
Merge tag 'objtool_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Adjust objtool to handle a recent binutils change to not generate
unused symbols anymore.
- Revert the fail-the-build-on-fatal-errors objtool strategy for now
due to the ever-increasing matrix of supported toolchains/plugins and
them causing too many such fatal errors currently.
- Do not add empty symbols to objdump's rbtree to accommodate clang
removing section symbols.
* tag 'objtool_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Don't fail on missing symbol table
objtool: Don't fail the kernel build on fatal errors
objtool: Don't add empty symbols to the rbtree
Linus Torvalds [Sun, 24 Jan 2021 18:09:20 +0000 (10:09 -0800)]
Merge tag 'sched_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Correct the marking of kthreads which are supposed to run on a
specific, single CPU vs such which are affine to only one CPU, mark
per-cpu workqueue threads as such and make sure that marking
"survives" CPU hotplug. Fix CPU hotplug issues with such kthreads.
- A fix to not push away tasks on CPUs coming online.
- Have workqueue CPU hotplug code use cpu_possible_mask when breaking
affinity on CPU offlining so that pending workers can finish on newly
arrived onlined CPUs too.
- Dump tasks which haven't vacated a CPU which is currently being
unplugged.
- Register a special scale invariance callback which gets called on
resume from RAM to read out APERF/MPERF after resume and thus make
the schedutil scaling governor more precise.
* tag 'sched_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Relax the set_cpus_allowed_ptr() semantics
sched: Fix CPU hotplug / tighten is_per_cpu_kthread()
sched: Prepare to use balance_push in ttwu()
workqueue: Restrict affinity change to rescuer
workqueue: Tag bound workers with KTHREAD_IS_PER_CPU
kthread: Extract KTHREAD_IS_PER_CPU
sched: Don't run cpu-online with balance_push() enabled
workqueue: Use cpu_possible_mask instead of cpu_active_mask to break affinity
sched/core: Print out straggler tasks in sched_cpu_dying()
x86: PM: Register syscore_ops for scale invariance
Linus Torvalds [Sun, 24 Jan 2021 17:46:05 +0000 (09:46 -0800)]
Merge tag 'x86_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a new Intel model number for Alder Lake
- Differentiate which aspects of the FPU state get saved/restored when
the FPU is used in-kernel and fix a boot crash on K7 due to early
MXCSR access before CR4.OSFXSR is even set.
- A couple of noinstr annotation fixes
- Correct die ID setting on AMD for users of topology information which
need the correct die ID
- A SEV-ES fix to handle string port IO to/from kernel memory properly
* tag 'x86_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add another Alder Lake CPU to the Intel family
x86/mmx: Use KFPU_387 for MMX string operations
x86/fpu: Add kernel_fpu_begin_mask() to selectively initialize state
x86/topology: Make __max_die_per_package available unconditionally
x86: __always_inline __{rd,wr}msr()
x86/mce: Remove explicit/superfluous tracing
locking/lockdep: Avoid noinstr warning for DEBUG_LOCKDEP
locking/lockdep: Cure noinstr fail
x86/sev: Fix nonistr violation
x86/entry: Fix noinstr fail
x86/cpu/amd: Set __max_die_per_package on AMD
x86/sev-es: Handle string port IO to kernel memory properly
Linus Torvalds [Sun, 24 Jan 2021 17:40:51 +0000 (09:40 -0800)]
Merge tag 'powerpc-5.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a bad interaction between the scv handling and the fallback L1D
flush, which could lead to user register corruption. Only affects
people using scv (~no one) on machines with old firmware that are
missing the L1D flush.
- Two small selftest fixes.
Thanks to Eirik Fuller, Libor Pechacek, Nicholas Piggin, Sandipan Das,
and Tulio Magno Quites Machado Filho.
* tag 'powerpc-5.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s: fix scv entry fallback flush vs interrupt
selftests/powerpc: Only test lwm/stmw on big endian
selftests/powerpc: Fix exit status of pkey tests
Linus Torvalds [Sun, 24 Jan 2021 17:35:28 +0000 (09:35 -0800)]
Merge tag 'for-linus-2021-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull misc fixes from Christian Brauner:
- Jann reported sparse complaints because of a missing __user
annotation in a helper we added way back when we added
pidfd_send_signal() to avoid compat syscall handling. Fix it.
- Yanfei replaces a reference in a comment to the _do_fork() helper I
removed a while ago with a reference to the new kernel_clone()
replacement
- Alexander Guril added a simple coding style fix
* tag 'for-linus-2021-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
kthread: remove comments about old _do_fork() helper
Kernel: fork.c: Fix coding style: Do not use {} around single-line statements
signal: Add missing __user annotation to copy_siginfo_from_user_any
Linus Torvalds [Sun, 24 Jan 2021 17:27:14 +0000 (09:27 -0800)]
Merge tag '5.11-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"An important signal handling patch for stable, and two small cleanup
patches"
* tag '5.11-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: do not fail __smb_send_rqst if non-fatal signals are pending
fs/cifs: Simplify bool comparison.
fs/cifs: Assign boolean values to a bool variable
Shakeel Butt [Sun, 24 Jan 2021 05:01:15 +0000 (21:01 -0800)]
mm: fix numa stats for thp migration
Currently the kernel is not correctly updating the numa stats for
NR_FILE_PAGES and NR_SHMEM on THP migration. Fix that.
For NR_FILE_DIRTY and NR_ZONE_WRITE_PENDING, although at the moment
there is no need to handle THP migration as kernel still does not have
write support for file THP but to be more future proof, this patch adds
the THP support for those stats as well.
Link: https://lkml.kernel.org/r/20210108155813.2914586-2-shakeelb@google.com Fixes: e71769ae52609 ("mm: enable thp migration for shmem thp") Signed-off-by: Shakeel Butt <shakeelb@google.com> Acked-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shakeel Butt [Sun, 24 Jan 2021 05:01:11 +0000 (21:01 -0800)]
mm: memcg: fix memcg file_dirty numa stat
The kernel updates the per-node NR_FILE_DIRTY stats on page migration
but not the memcg numa stats.
That was not an issue until recently the commit 5f9a4f4a7096 ("mm:
memcontrol: add the missing numa_stat interface for cgroup v2") exposed
numa stats for the memcg.
So fix the file_dirty per-memcg numa stat.
Link: https://lkml.kernel.org/r/20210108155813.2914586-1-shakeelb@google.com Fixes: 5f9a4f4a7096 ("mm: memcontrol: add the missing numa_stat interface for cgroup v2") Signed-off-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Yang Shi <shy828301@gmail.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Sun, 24 Jan 2021 05:01:07 +0000 (21:01 -0800)]
mm: memcg/slab: optimize objcg stock draining
Imran Khan reported a 16% regression in hackbench results caused by the
commit f2fe7b09a52b ("mm: memcg/slab: charge individual slab objects
instead of pages"). The regression is noticeable in the case of a
consequent allocation of several relatively large slab objects, e.g.
skb's. As soon as the amount of stocked bytes exceeds PAGE_SIZE,
drain_obj_stock() and __memcg_kmem_uncharge() are called, and it leads
to a number of atomic operations in page_counter_uncharge().
The corresponding call graph is below (provided by Imran Khan):
Instead of directly uncharging the accounted kernel memory, it's
possible to refill the generic page-sized per-cpu stock instead. It's a
much faster operation, especially on a default hierarchy. As a bonus,
__memcg_kmem_uncharge_page() will also get faster, so the freeing of
page-sized kernel allocations (e.g. large kmallocs) will become faster.
A similar change has been done earlier for the socket memory by the
commit 475d0487a2ad ("mm: memcontrol: use per-cpu stocks for socket
memory uncharging").
Link: https://lkml.kernel.org/r/20210106042239.2860107-1-guro@fb.com Fixes: f2fe7b09a52b ("mm: memcg/slab: charge individual slab objects instead of pages") Signed-off-by: Roman Gushchin <guro@fb.com> Reported-by: Imran Khan <imran.f.khan@oracle.com> Tested-by: Imran Khan <imran.f.khan@oracle.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Michal Koutn <mkoutny@suse.com> Cc: Michal Koutný <mkoutny@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / kernel.git / log