Dave Airlie [Wed, 11 Aug 2021 23:43:38 +0000 (09:43 +1000)]
Merge tag 'drm-intel-gt-next-2021-08-06-1' of ssh://git.freedesktop.org/git/drm/drm-intel into drm-next
UAPI Changes:
- Add I915_MMAP_OFFSET_FIXED
On devices with local memory `I915_MMAP_OFFSET_FIXED` is the only valid
type. On devices without local memory, this caching mode is invalid.
As caching mode when specifying `I915_MMAP_OFFSET_FIXED`, WC or WB will
be used, depending on the object placement on creation. WB will be used
when the object can only exist in system memory, WC otherwise.
- Initial workarounds for ADL-P (Clint)
- Preliminary code for XeHP/DG2 (Stuart, Umesh, Matt R, Prathap, Ram,
Venkata, Akeem, Tvrtko, John, Lucas)
- Fix ADL-S DMA mask size to 39 bits (Tejas)
- Remove code for CNL (Lucas)
- Add ADL-P GuC/HuC firmwares (John)
- Update HuC to 7.9.3 for TGL/ADL-S/RKL (John)
- Fix -EDEADLK handling regression (Ville)
- Implement Wa_1508744258 for DG1 and Gen12 iGFX (Jose)
- Extend Wa_1406941453 to ADL-S (Jose)
- Drop unnecessary workarounds per stepping for SKL/BXT/ICL (Matt R)
- Use fuse info to enable SFC on Gen12 (Venkata)
- Unconditionally flush the pages on acquire on EHL/JSL (Matt A)
- Probe existence of backing struct pages upon userptr creation (Chris, Matt A)
- Add an intermediate GEM proto-context to delay real context creation (Jason)
- Implement SINGLE_TIMELINE with a syncobj (Jason)
- Set the watchdog timeout directly in intel_context_set_gem (Jason)
- Disallow userspace from creating contexts with too many engines (Jason)
- Revert "drm/i915/gem: Asynchronous cmdparser" (Jason)
- Revert "drm/i915: Propagate errors on awaiting already signaled fences" (Jason)
- Revert "drm/i915: Skip over MI_NOOP when parsing" (Jason)
- Revert "drm/i915: Shrink the GEM kmem_caches upon idling" (Daniel)
- Always let TTM handle object migration (Jason)
- Correct the locking and pin pattern for dma-buf (Thomas H, Michael R, Jason)
- Migrate to system at dma-buf attach time (Thomas, Michael R)
- MAJOR refactoring of the GuC backend code to allow for enabling on Gen11+
(Matt B, John, Michal Wa., Fernando, Daniele, Vinay)
- Update GuC firmware interface to v62.0.0 (John, Michal Wa., Matt B)
- Add GuCRC feature to hand over the control of HW RC6 to the GuC on
Gen12+ when GuC submission is enabled (Vinay, Sujaritha, Daniele,
John, Tvrtko)
- Use the correct IRQ during resume and eliminate DRM IRQ midlayer (Thomas Z)
- Add pipelined page migration and clearing (Chris, Thomas H)
- Use TTM for system memory on discrete (Thomas H)
- Implement object migration for display vs. dma-buf (Thomas H)
- Perform execbuffer object locking as a separate step (Thomas H)
- Add support for explicit L3BANK steering (Matt, Daniele)
- Remove duplicated call to ops->pread (Daniel)
- Fix pagefault disabling in the first execbuf slowpath (Daniel)
- Simplify userptr locking (Thomas H)
- Improvements to the GuC CTB code (Matt B, John)
- Make GT workaround upper bounds exclusive (Matt R)
- Check for nomodeset in i915_init() first (Daniel)
- Delete now unused gpu reloc code (Daniel)
- Document RFC plans for GuC submission, DRM scheduler and new parallel
submit uAPI (Matt B)
- Reintroduce buddy allocator this time with TTM (Matt A)
- Support forcing page size with LMEM (Matt A)
- Add i915_sched_engine to abstract a submission queue between backends (Matt B)
- Use accelerated move in TTM (Ram)
- Fix memory leaks from TTM backend (Thomas H)
- Introduce WW transaction helper (Thomas H)
- Improve debug Kconfig texts a bit (Daniel)
- Unify user object creation code (Jason)
- Use a table for i915_init/exit (Jason)
- Move slabs to module init/exit (Daniel)
- Remove now unused i915_globals (Daniel)
- Extract i915_module.c (Daniel)
- Consistently use adl-p/adl-s in WA comments (Jose)
- Finish INTEL_GEN and friends conversion (Lucas)
- Correct variable/function namings (Lucas)
- Code checker fixes (Wan, Matt A)
- Tracepoint improvements (Matt B)
- Kerneldoc improvements (Tvrtko, Jason, Matt A, Maarten)
- Selftest improvements (Chris, Matt A, Tejas, Thomas H, John, Matt B,
Rahul, Vinay)
Felix Kuehling [Sat, 17 Jul 2021 02:46:21 +0000 (22:46 -0400)]
drm/amdkfd: Allow querying SVM attributes that are clear
Currently the SVM get_attr call allows querying, which flags are set
in the entire address range. Add the opposite query, which flags are
clear in the entire address range. Both queries can be combined in a
single get_attr call, which allows answering questions such as, "is
this address range coherent, non-coherent, or a mix of both"?
Proposed userspace for UAPI:
https://github.com/RadeonOpenCompute/ROCR-Runtime/tree/memory_model_queries
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Philip Yand <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Colin Ian King [Fri, 6 Aug 2021 11:16:15 +0000 (12:16 +0100)]
drm/amd/display: Remove redundant initialization of variable eng_id
The variable eng_id is being initialized with a value that is never
read, it is being re-assigned on the next statment. The assignment
is redundant and can be removed.
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dan Carpenter [Fri, 6 Aug 2021 15:05:18 +0000 (18:05 +0300)]
drm/amdgpu: check for allocation failure in amdgpu_vkms_sw_init()
Check whether the kcalloc() fails and return -ENOMEM if it does.
Fixes: 84ec374bd58036 ("drm/amdgpu: create amdgpu_vkms (v4)") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kenneth Feng [Fri, 6 Aug 2021 02:28:04 +0000 (10:28 +0800)]
drm/amd/pm: bug fix for the runtime pm BACO
In some systems only MACO is supported. This is to fix the problem
that runtime pm is enabled but BACO is not supported. MACO will be
handled seperately.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Jack Gui <Jack.Gui@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Add preferred mode in modeset when freesync video mode's enabled.
[Why]
With kernel module parameter "freesync_video" is enabled, if the mode
is changed to preferred mode(the mode with highest rate), then Freesync
fails because the preferred mode is treated as one of freesync video
mode, and then be configurated as freesync video mode(fixed refresh
rate).
[How]
Skip freesync fixed rate configurating when modeset to preferred mode.
Signed-off-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/pm: Fix a memory leak in an error handling path in 'vangogh_tables_init()'
'watermarks_table' must be freed instead 'clocks_table', because
'clocks_table' is known to be NULL at this point and 'watermarks_table' is
never freed if the last kzalloc fails.
Fixes: c98ee89736b8 ("drm/amd/pm: add the fine grain tuning function for vangogh") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixed braces, an unnecessary if statement and added a missing space.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Sergio Miguéns Iglesias <sergio@lony.xyz> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhenneng Li [Thu, 5 Aug 2021 10:45:57 +0000 (18:45 +0800)]
drm/radeon: Update pitch for page flip
When primary bo is updated, crtc's pitch may
have not been updated, this will lead to show
disorder content when user changes display mode,
we update crtc's pitch in page flip to avoid
this bug.
This refers to amdgpu's pageflip.
v1->v2:
Update all of the pitch in all of the page_flip functions
in radeon rather than just the evergreen one.
v2->v3:
Update pitch set method for r100 according to
radeon_legacy_crtc.c
Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Zhenneng Li <lizhenneng@kylinos.cn> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Graham Sider [Mon, 12 Jul 2021 17:50:33 +0000 (13:50 -0400)]
drm/amdkfd: Expose GFXIP engine version to sysfs
Add u32 gfx_target_version field to kfd_node_properties and
kfd_device_info. Populate <asic>_device_info structs accordingly and
expose to sysfs.
This allows eliminating device-ID-based lookup tables in user mode for
future ASICs.
Signed-off-by: Graham Sider <Graham.Sider@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tuo Li [Wed, 4 Aug 2021 01:51:32 +0000 (18:51 -0700)]
drm/amdgpu: drop redundant null-pointer checks in amdgpu_ttm_tt_populate() and amdgpu_ttm_tt_unpopulate()
The varialbe gtt in the function amdgpu_ttm_tt_populate() and
amdgpu_ttm_tt_unpopulate() is guaranteed to be not NULL in the context.
Thus the null-pointer checks are redundant and can be dropped.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Tuo Li <islituo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Mon, 2 Aug 2021 14:03:30 +0000 (10:03 -0400)]
drm/amdgpu: don't enable baco on boco platforms in runpm
If the platform uses BOCO, don't use BACO in runtime suspend.
We could end up executing the BACO path if the platform supports
both.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1669 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the MODE register into the per-wave debug information.
This register holds state such as FP rounding and denorm
modes, which exceptions are enabled, and active clamping
modes.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous logic is recording the amount of valid vcn instances
to use them on SRIOV, it is a hard task due to the vcn accessment is
based on the index of the vcn instance.
Check if the vcn instance enabled before do instance init.
Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com> Reviewed-by: Monk Liu <monk.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
John Clements [Tue, 3 Aug 2021 08:18:14 +0000 (16:18 +0800)]
drm/amdgpu: update PSP BL cmd IDs
resolved bug with incorrect PSP BL cmd IDs
Signed-off-by: John Clements <john.clements@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Tue, 23 Mar 2021 16:22:45 +0000 (12:22 -0400)]
drm/amd/amdgpu: add regCP_MEx_INT_STAT_DEBUG for Aldebaran debugging
Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shirish S [Tue, 3 Aug 2021 08:33:44 +0000 (14:03 +0530)]
drm/amdgpu/display: fix DMUB firmware version info
DMUB firmware info is printed before it gets initialized.
Correct this order to ensure true value is conveyed.
Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add DC_FP helper to check FPU state
To fully isolate FPU operations in a single place, we must avoid
situations where compilers spill FP values to registers due to FP enable
in a specific C file. Note that even if we isolate all FPU functions in
a single file and call its interface from other files, the compiler
might enable the use of FPU before we call DC_FP_START. Nevertheless, it
is the programmer's responsibility to invoke DC_FP_START/END in the
correct place. To highlight situations where developers forgot to use
the FP protection before calling the DC FPU interface functions, we
introduce a helper that checks if the function is invoked under FP
protection. If not, it will trigger a kernel warning.
Changes cince V3:
- Rebase
Changes cince V2 (Christian):
- Do not use this_cpu_* between get/put_cpu_ptr().
- In the kernel documentation, better describe restrictions.
- Make dc_assert_fp_enabled trigger the ASSERT message.
Changes since V1:
- Remove fp_enable variables
- Rename dc_is_fp_enabled to dc_assert_fp_enabled
- Replace wrong variable type
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Add control mechanism for FPU utilization
DC invokes DC_FPU_START/END in multiple parts of the code; this can
create a situation where we invoke this FPU operation in a nested way or
exit too early. For avoiding this situation, this commit adds a
mechanism where dc_fpu_begin/end manages the access to
kernel_fpu_begin/end.
Change since V3:
- Rebase
Change since V2:
- Christian: Do not use this_cpu_* between get/put_cpu_ptr().
Change since V1:
- Use a better variable names
- Use get_cpu_ptr and put_cpu_ptr to better balance preemption enable
and disable
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC invokes DC_FPU_START/END in multiple parts of the code; this can
create a situation where we invoke this FPU operation in a nested way or
exit too early. For avoiding this situation, this commit adds a
mechanism where dc_fpu_begin/end manages the access to
kernel_fpu_begin/end.
Change since V3:
- Christian: Move PPC64 code to dc_fpu_begin/end.
Change since V2:
- Christian: Do not use this_cpu_* between get/put_cpu_ptr().
Change since V1:
- Use a better variable names
- Use get_cpu_ptr and put_cpu_ptr to better balance preemption enable
and disable
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: Move specific DCN2x code that uses FPU to DML
The display core files rely on FPU, which requires to be compiled with
special flags. Ideally, we don't want these FPU operations spread around
the DC code; nevertheless, it happens in the current source. This commit
introduces a new directory inside DML for centralizing shared DCN
functions that require FPU and have been used outside DML. For
illustrating this process of transferring FPU functions to the DML
folder, this commit moves one of the functions
dcn20_populate_dml_writeback_from_context) that require FPU access to a
single shared file. Notice that this is the first part of the work, and
it does not fix the FPU issue yet; we still need other patches for
achieving the complete FPU isolation.
Changes since V3:
- Jun: Instead of creating a new directory to keep the FPU code, let's
make the DML folder the only part that requires FPU access. Drop
fpu_operation folder.
- Christian: Fix function code style.
Changes since V2:
- Christian: Remove unnecessary wrapper.
- lkp: Add missing prototype.
- Only compile the FPU operations if the DCN option is enabled.
Change since V1:
- Update documentation and rebase.
Cc: Harry Wentland <harry.wentland@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amd/display: workaround for hard hang on HPD on native DP
[Why]
HPD disable and enable sequences are not mutually exclusive
on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s),
part of the disable sequence (specifically, a request to SMU
to lower refclk) could come right before the call to PHY
enable, causing DMUB to access an unresponsive PHY
and thus a hard hang on the system.
drm/amd/display: Add check for validating unsupported ODM plus MPO case
[Why]
We do not currently support ODM plus MPO on only one side of the
screen. This unsupported case causes validation calculations to
divide by zero due to invalid viewport values.
[How]
Add stopgap for the validation of ODM plus MPO on one side of
screen case.
drm/amd/display: Fix resetting DCN3.1 HW when resuming from S4
[Why] On S4 resume we also need to fix detection of when to reload DMCUB
firmware because we're currently using the VBIOS version which isn't
compatible with the driver version.
[How] Update the hardware init check for DCN31 since it's the ASIC that
has this issue.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Jude Shih <jude.shih@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
For DCN31 onward, LTTPR is to be enabled and set to Transparent by
VBIOS. Driver is to assume that VBIOS has done this without needing to
check the VBIOS interop bit.
[HOW]
Add LTTPR enable and interop VBIOS bits into dc->caps, and force-set the
interop bit to true for DCN31+.
Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Candice Li [Tue, 27 Jul 2021 12:40:18 +0000 (20:40 +0800)]
drm/amd/amdgpu: remove redundant host to psp cmd buf allocations
Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ryan Taylor [Fri, 18 Jun 2021 20:16:37 +0000 (13:16 -0700)]
drm/amdgpu: replace dce_virtual with amdgpu_vkms (v3)
Move dce_virtual into amdgpu_vkms and update all references to
dce_virtual with amdgpu_vkms.
v2: Removed more references to dce_virtual.
v3: Restored display modes from previous implementation.
Signed-off-by: Ryan Taylor <Ryan.Taylor@amd.com> Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ryan Taylor [Fri, 18 Jun 2021 20:03:35 +0000 (13:03 -0700)]
drm/amdgpu: cleanup dce_virtual
Remove obsolete functions and variables from dce_virtual.
Signed-off-by: Ryan Taylor <Ryan.Taylor@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ryan Taylor [Mon, 7 Jun 2021 18:53:06 +0000 (11:53 -0700)]
drm/amdgpu: create amdgpu_vkms (v4)
Modify the VKMS driver into an api that dce_virtual can use to create
virtual displays that obey drm's atomic modesetting api.
v2: Made local functions static.
v3: Switched vkms_output kzalloc for kcalloc.
Cleanup patches by moving display mode fixes to this patch.
v4: Update atomic_check and atomic_update to comply with new kms api.
Signed-off-by: Ryan Taylor <Ryan.Taylor@amd.com> Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: avoid over-handle of fence driver fini in s3 test (v2)
In amdgpu_fence_driver_hw_fini, no need to call drm_sched_fini to stop
scheduler in s3 test, otherwise, fence related failure will arrive
after resume. To fix this and for a better clean up, move drm_sched_fini
from fence_hw_fini to fence_sw_fini, as it's part of driver shutdown, and
should never be called in hw_fini.
v2: rename amdgpu_fence_driver_init to amdgpu_fence_driver_sw_init,
to keep sw_init and sw_fini paired.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1668 Fixes: 8d35a2596164c1 ("drm/amdgpu: adjust fence driver enable sequence") Suggested-by: Christian König <christian.koenig@amd.com> Tested-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/amdgpu: Fix channel_index table layout for Aldebaran
Fix the channel_index table layout to fetch the correct
channel_index when calculating physical address from
normalized address during page retirement.
Also, fix the number of UMC instances and number of channels
within each UMC instance for Aldebaran.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-By: John Clements <john.clements@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Randy Dunlap [Fri, 30 Jul 2021 03:03:47 +0000 (20:03 -0700)]
drm/amdgpu: fix checking pmops when PM_SLEEP is not enabled
'pm_suspend_target_state' is only available when CONFIG_PM_SLEEP
is set/enabled. OTOH, when both SUSPEND and HIBERNATION are not set,
PM_SLEEP is not set, so this variable cannot be used.
../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c: In function ‘amdgpu_acpi_is_s0ix_active’:
../drivers/gpu/drm/amd/amdgpu/amdgpu_acpi.c:1046:11: error: ‘pm_suspend_target_state’ undeclared (first use in this function); did you mean ‘__KSYM_pm_suspend_target_state’?
return pm_suspend_target_state == PM_SUSPEND_TO_IDLE;
^~~~~~~~~~~~~~~~~~~~~~~
__KSYM_pm_suspend_target_state
Also use shorter IS_ENABLED(CONFIG_foo) notation for checking the
2 config symbols.
Fixes: 91e273712ab8dd ("drm/amdgpu: Check pmops for desired suspend state") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: linux-next@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Dave Airlie [Thu, 5 Aug 2021 20:55:58 +0000 (06:55 +1000)]
Merge tag 'drm-misc-next-2021-08-05' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Assorted docbook updates.
- Unbreak damage selftests.
- Define DRM_FORMAT_MAX_PLANES, maximum planes for a planar format.
- Add gem fb vmap/vunmap helpers, use them in gud and vkms drivers.
Driver Changes:
- Bridge fixes for ti-sn65dsi86.
- Use a full-featured driver for ATNA33XC20 to get backlight right,
instead of the simple panel driver.
- Assorted fixes to pl111,.
- Support E Ink VB3300-KCA panel.
- Add support for Gopher 2b LCD and ilitek ili9341 panels.
Matt Roper [Thu, 29 Jul 2021 16:59:55 +0000 (09:59 -0700)]
drm/i915/dg2: Add SQIDI steering
Although DG2_G10 platforms will always have all SQIDI's present and
don't need steering for registers in a SQIDI MMIO range, this isn't true
for DG2_G11 platforms; only SQIDI's 2 and 3 can be used on those.
We handle SQIDI ranges a bit differently from other types of explicit
steering. The SQIDI ranges belong to either the MCFG unit or the SF
unit, both of which have their own dedicated steering registers and do
not use the typical 0xFDC steering control that all other types of
ranges use. Thus we only need to worry about picking a valid initial
value for the MCFG and SF steering registers (0xFD0 and 0xFD8
respectively) at driver init; they won't change after we set them up so
we don't need to worry about re-steering them explicitly at runtime.
Given that any SQIDI value should work fine for DG2-G10 and XeHP SDV,
while only values of 2 and 3 are valid for DG2-G11, we'll just
initialize the MCFG and SF steering registers to a constant value of "2"
for all XeHP-based platforms for simplicity --- that will work in all
cases.
Matt Roper [Thu, 29 Jul 2021 16:59:54 +0000 (09:59 -0700)]
drm/i915/dg2: Update steering tables
DG2's replicated register ranges are almost the same at XeHP SDV with
the exception of one LNCF sub-range that switches to gslice steering.
We can re-use the XeHP SDV mslice steering table and just provide a
DG2-specific LNCF steering table.
Xe_HP is more modular than its predecessors and as a consequence it has
more types of replicated registers. As with l3bank regions on previous
platforms, we may need to explicitly re-steer accesses to these new
types of ranges at runtime if we can't find a single default steering
value that satisfies the fusing of all types.
v2:
- Add a local 'i915' variable to reduce gt->i915 usage. (Caz)
- Drop unused 'intel_gt_read_register' prototype. (Caz)
v3:
- Drop unnecessary comment text. (Lucas)
- Drop unused register bit definition. (Lucas)
Bspec: 66534 Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Caz Yokoyama <caz.yokoyama@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-2-matthew.d.roper@intel.com
Chris Wilson [Fri, 23 Jul 2021 11:34:05 +0000 (12:34 +0100)]
drm/i915/userptr: Probe existence of backing struct pages upon creation
Jason Ekstrand requested a more efficient method than userptr+set-domain
to determine if the userptr object was backed by a complete set of pages
upon creation. To be more efficient than simply populating the userptr
using get_user_pages() (as done by the call to set-domain or execbuf),
we can walk the tree of vm_area_struct and check for gaps or vma not
backed by struct page (VM_PFNMAP). The question is how to handle
VM_MIXEDMAP which may be either struct page or pfn backed...
With discrete we are going to drop support for set_domain(), so offering
a way to probe the pages, without having to resort to dummy batches has
been requested.
v2:
- add new query param for the PROBE flag, so userspace can easily
check if the kernel supports it(Jason).
- use mmap_read_{lock, unlock}.
- add some kernel-doc.
v3:
- In the docs also mention that PROBE doesn't guarantee that the pages
will remain valid by the time they are actually used(Tvrtko).
- Add a small comment for the hole finding logic(Jason).
- Move the param next to all the other params which just return true.
Testcase: igt/gem_userptr_blits/probe Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Jason Ekstrand <jason@jlekstrand.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ramalingam C <ramalingam.c@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Kenneth Graunke <kenneth@whitecape.org> Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210723113405.427004-1-matthew.auld@intel.com
Dillon Min [Sat, 24 Jul 2021 03:44:03 +0000 (11:44 +0800)]
drm/panel: Add ilitek ili9341 panel driver
This driver combines tiny/ili9341.c mipi_dbi_interface driver
with mipi_dpi_interface driver, can support ili9341 with serial
mode and parallel rgb interface mode by different dts bindings.
Artjom Vejsel [Wed, 4 Aug 2021 00:23:53 +0000 (03:23 +0300)]
drm/panel-simple: add Gopher 2b LCD panel
The Gopher 2b LCD panel is used in Gopher 2b handhelds.
It's simple panel with NewVision NV3047 driver, but SPI lines are not
connected. It has no specific name, since it's unique to that handheld.
lot name at AliExpress: 4.3 inch 40PIN TFT LCD Screen COG NV3047 Drive
IC 480(RGB)*272 No Touch 24Bit RGB Interface
This code just disables gpu relocations, leaving the garbage
collection for later patches and more importantly, much less confusing
diff. Also given how much headaches this code has caused in the past,
letting this soak for a bit seems justified.
Acked-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Jason Ekstrand <jason@jlekstrand.net> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210803124833.3817354-1-daniel.vetter@ffwll.ch
Matthew Auld [Thu, 29 Jul 2021 16:59:58 +0000 (09:59 -0700)]
drm/i915/xehp: Changes to ss/eu definitions
Xe_HP no longer has "slices" in the same way that old platforms did.
There are new concepts (gslices, cslices, mslices) that apply in various
contexts, but for the purposes of fusing slices no longer exist and we
just have one large pool of dual-subslices (DSS) to work with.
Furthermore, the meaning of the DSS fuse is inverted compared to past
platforms --- it now specifies which DSS are enabled rather than which
ones are disabled.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Stuart Summers <stuart.summers@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Prasad Nallani <prasad.nallani@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210729170008.2836648-9-matthew.d.roper@intel.com
Matt Roper [Thu, 29 Jul 2021 16:59:53 +0000 (09:59 -0700)]
drm/i915/dg2: Add forcewake table
The DG2 forcewake table is very similar to the one used by XeHP SDV (and
both platforms are even presented as a single table in the bspec). For
the most part DG2 starts using a few additional ranges that were
'reserved' on XeHP SDV and stops using some others. However there is a
single range (0xd800-0xd87f) that needs to be handled differently
between the two platforms (it needs GT wake on XeHP SDV, but render wake
on DG2) so unless we want to wake both domains (which could waste power)
or define new types of forcewake domains for this special case we need
to have separate tables for the two platforms. Let's define the ranges
for both platforms with a parameterized macro so that we don't actually
need to duplicate everything in the code.
It should be fine for DG2 to re-use the Xe_HP shadow register list so we
can continue to use the 'xehpsdv' MMIO write functions and don't need to
spin up a separate DG2 instance.
This feature hands over the control of HW RC6 to the GuC.
GuC decides when to put HW into RC6 based on it's internal
busyness algorithms.
GuCRC needs GuC submission to be enabled, and only
supported on Gen12+ for now.
When GuCRC is enabled, do not set HW RC6. Use a H2G message
to tell GuC to enable GuCRC. When disabling RC6, tell GuC to
revert RC6 control back to KMD. KMD is still responsible for
enabling everything related to Coarse Power Gating though.
v2: Address comments (Michal W)
v3: Don't set hysterisis values when GuCRC is used (Matt Roper)
v4: checkpatch()
Update the get/set min/max freq hooks to work for
SLPC case as well. Consolidate helpers for requested/min/max
frequency get/set to intel_rps where the proper action can
be taken depending on whether SLPC is enabled.
v2: Add wrappers for getting rp0/1/n frequencies, update
softlimits in set min/max SLPC functions. Also check for
boundary conditions before setting them.
v3: Address review comments (Michal W)
v4: Add helper for host part of intel_rps_set_freq helpers (Michal W)
v5: checkpatch()
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Acked-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730202119.23810-13-vinay.belgaumkar@intel.com
drm/i915/guc/slpc: Cache platform frequency limits
Cache rp0, rp1 and rpn platform limits into SLPC structure
for range checking while setting min/max frequencies.
Also add "soft" limits which keep track of frequency changes
made from userland. These are initially set to platform min
and max.
v2: Address review comments (Michal W)
v3: Formatting (Michal W)
v4: Add separate function to parse rp values (Michal W)
v5: Perform range checking for set min/max (Michal W)
v6: checkpatch() and rename static functions (Michal W)
v7: check ret code while setting SLPC limits (Michal W)
This interrupt is enabled during RPS initialization, and
now needs to be done by SLPC code. It allows ARAT timer
expiry interrupts to get forwarded to GuC.
Add helpers to read the min/max frequency being used
by SLPC. This is done by send a H2G command which forces
SLPC to update the shared data struct which can then be
read. These helpers will be used in a sysfs patch later
on.
v2: Address review comments (Michal W)
v3: Return err in case of query failure (Michal W)
v4: Move decode_min/max_freq to this patch
drm/i915/guc/slpc: Remove BUG_ON in guc_submission_disable
The assumption when it was added was that GT would not be
holding any gt_pm references. However, uc_init is called
from gt_init_hw, which holds a forcewake ref. If SLPC
enable fails, we will still be holding this ref, which will
result in the BUG_ON.
drm/i915/guc/slpc: Enable SLPC and add related H2G events
Add methods for interacting with GuC for enabling SLPC. Enable
SLPC after GuC submission has been established. GuC load will
fail if SLPC cannot be successfully initialized. Add various
helper methods to set/unset the parameters for SLPC. They can
be set using H2G calls or directly setting bits in the shared
data structure.
v2: Address several review comments, add new helpers for
decoding the SLPC min/max frequencies. Use masks instead of hardcoded
constants. (Michal W)
v3: Split global_state_to_string function, and check for positive
non-zero return value from intel_guc_send() (Michal W)
v4: Optimize the stringify function and other comments (Michal W)
v5: Enable slpc as well before declaring GuC submission status (Michal W)
drm/i915/guc/slpc: Allocate, initialize and release SLPC
Allocate data structures for SLPC and functions for
initializing on host side.
v2: Address review comments (Michal W)
v3: Remove unnecessary header includes (Michal W)
v4: Rebase
v5: Move allocation of shared data into slpc_init() (Michal W)
drm/i915/guc/slpc: Gate Host RPS when SLPC is enabled
Also ensure uc_init is called before we initialize RPS so that we
can check for SLPC support. We do not need to enable up/down
interrupts when SLPC is enabled. However, we still need the ARAT
interrupt, which will be enabled separately later.
v2: Explicitly return from intel_rps_enable with slpc check (Matthew B)
Eric Huang [Wed, 14 Jul 2021 18:44:53 +0000 (14:44 -0400)]
drm/amdkfd: Only apply heavy-weight TLB flush on Aldebaran
It is to workaround HW bug on other Asics and based on
reverting two commits back:
drm/amdkfd: Add heavy-weight TLB flush after unmapping
drm/amdkfd: Add memory sync before TLB flush on unmap
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
xinhui pan [Tue, 27 Jul 2021 09:43:37 +0000 (17:43 +0800)]
drm/amdgpu: Fix out-of-bounds read when update mapping
If one GTT BO has been evicted/swapped out, it should sit in CPU domain.
TTM only alloc struct ttm_resource instead of struct ttm_range_mgr_node
for sysMem.
Now when we update mapping for such invalidated BOs, we might walk out
of bounds of struct ttm_resource.
Three possible fix:
1) Let sysMem manager alloc struct ttm_range_mgr_node, like
ttm_range_manager does.
2) Pass pages_addr to update_mapping function too, but need memset
pages_addr[] to zero when unpopulate.
3) Init amdgpu_res_cursor directly.
bug is detected by kfence.
==================================================================
BUG: KFENCE: out-of-bounds read in amdgpu_vm_bo_update_mapping+0x564/0x6e0
Out-of-bounds read at 0x000000008ea93fe9 (64B right of kfence-#167):
amdgpu_vm_bo_update_mapping+0x564/0x6e0 [amdgpu]
amdgpu_vm_bo_update+0x282/0xa40 [amdgpu]
amdgpu_vm_handle_moved+0x19e/0x1f0 [amdgpu]
amdgpu_cs_vm_handling+0x4e4/0x640 [amdgpu]
amdgpu_cs_ioctl+0x19e7/0x23c0 [amdgpu]
drm_ioctl_kernel+0xf3/0x180 [drm]
drm_ioctl+0x2cb/0x550 [drm]
amdgpu_drm_ioctl+0x5e/0xb0 [amdgpu]
Signed-off-by: xinhui pan <xinhui.pan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm/vkms: Map output framebuffer BOs with drm_gem_fb_vmap()
Abstract the framebuffer details by mappings its BOs with a call
to drm_gem_fb_vmap(). Unmap with drm_gem_fb_vunamp().
Before, the output address with stored as raw pointer in the priv
field of struct drm_writeback_job. Introduce the new type
struct vkms_writeback_job, which holds the output mappings addresses
while the writeback job is active.
The patchset also cleans up some internal casting an setup of the
output addresses. No functional changes.
v3:
* free instances of struct vkms_writeback_job on cleanup
or errors
drm/gem: Clear mapping addresses for unused framebuffer planes
Set the returned mapping address to NULL if a framebuffer plane does
not have a BO associated with it. Likewise, ignore mappings of NULL
during framebuffer unmap operations. Allows users of the functions to
perform unmap operations of certain BOs by themselfes.
Move framebuffer vmap code from shadow-buffered plane state into the new
interfaces drm_gem_fb_vmap() and drm_gem_fb_vunmap(). These functions
provide mappings of a framebuffer's BOs into kernel address space. No
functional changes.
v4:
* remove duplicated blank line
v2:
* using [static N] for array parameters enables compile-time checks
* include <drm/drm_fourcc.h> for DRM_FORMAT_MAX_PLANES (kernel
test robot)
DRM uses a magic number of 4 for the maximum number of planes per color
format. Declare this constant via DRM_FORMAT_MAX_PLANES and update the
related code. Some code depends on the length of arrays that are now
declared with DRM_FORMAT_MAX_PLANES. Convert it from '4' to ARRAY_SIZE.
v2:
* mention usage of ARRAY_SIZE() in the commit message (Maxime)
* also fix error handling in drm_gem_fb_init_with_funcs()
(kernel test robot)
* include <drm/drm_fourcc.h> for DRM_FORMAT_MAX_PLANES
Simon Ser [Mon, 2 Aug 2021 07:28:35 +0000 (07:28 +0000)]
drm: document drm_mode_get_property
It's not obvious what the fields mean and how they should be used.
The most important detail is the link to drm_property.flags, which
describes how property types work.
v2: document enum drm_mode_property_enum, add ref to "Modeset Base
Object Abstraction" (Daniel)
Daniel Vetter [Fri, 30 Jul 2021 09:52:51 +0000 (11:52 +0200)]
drm: Fix oops in damage self-tests by mocking damage property
I've added a new check to make sure that drivers which insepct the
damage property have it set up correctly, but somehow missed that this
borke the damage selftest in the CI result noise.
Fix it up by mocking enough of drm_device and drm_plane so we can call
drm_plane_enable_fb_damage_clips() to make the new check happy.
Since there's a lot of duplicated mock code already copy-pasted into
each test I've also refactored this a bit to trim it down.
v2: Squash in fixup from 0day for
drivers/gpu/drm/selftests/test-drm_damage_helper.c:15:19: warning: symbol 'mock_device' was not declared. Should it be static?
drivers/gpu/drm/selftests/test-drm_damage_helper.c:16:30: warning: symbol 'mock_obj_props' was not declared. Should it be static?
drivers/gpu/drm/selftests/test-drm_damage_helper.c:17:18: warning: symbol 'mock_plane' was not declared. Should it be static?
drivers/gpu/drm/selftests/test-drm_damage_helper.c:18:21: warning: symbol 'mock_prop' was not declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: kernel test robot <lkp@intel.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Fixes: c7fcbf251397 ("drm/plane: check that fb_damage is set up when used") Cc: José Roberto de Souza <jose.souza@intel.com> (v1) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210730095251.4343-1-daniel.vetter@ffwll.ch Link: https://patchwork.freedesktop.org/patch/msgid/20210730141948.GA11955@243d74413310
Gregory Williams [Sat, 31 Jul 2021 00:53:28 +0000 (20:53 -0400)]
DRM: ast: Fixed coding style issues of ast_mode.c
Removed space before comma, fixed if statements by putting trailing
statements on new line, fixed unsigned int declaration, and removed
not needed else statement after return.
projects / kernel.git / log