Paul Clements [Thu, 15 Apr 2021 21:17:57 +0000 (17:17 -0400)]
md/raid1: properly indicate failure when ending a failed write request
This patch addresses a data corruption bug in raid1 arrays using bitmaps.
Without this fix, the bitmap bits for the failed I/O end up being cleared.
Since we are in the failure leg of raid1_end_write_request, the request
either needs to be retried (R1BIO_WriteError) or failed (R1BIO_Degraded).
Fixes: eeba6809d8d5 ("md/raid1: end bio when the device faulty") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Paul Clements <paul.clements@us.sios.com> Signed-off-by: Song Liu <song@kernel.org>
Fixes: dbb64f8635f5d ("md-cluster: Fix adding of new disk with new reload code") Fixes: 659b254fa7392 ("md-cluster: remove a disk asynchronously from cluster environment") Cc: stable@vger.kernel.org Reviewed-by: Gang He <ghe@suse.com> Signed-off-by: Heming Zhao <heming.zhao@suse.com> Signed-off-by: Song Liu <song@kernel.org>
Merge tag 'nvme-5.13-2021-04-22' of git://git.infradead.org/nvme into for-5.13/drivers
Pull NVMe updates from Christoph:
"- add support for a per-namespace character device (Minwoo Im)
- various KATO fixes and cleanups (Hou Pu, Hannes Reinecke)
- APST fix and cleanup"
* tag 'nvme-5.13-2021-04-22' of git://git.infradead.org/nvme:
nvme: introduce generic per-namespace chardev
nvme: cleanup nvme_configure_apst
nvme: do not try to reconfigure APST when the controller is not live
nvme: add 'kato' sysfs attribute
nvme: sanitize KATO setting
nvmet: avoid queuing keep-alive timer if it is disabled
Minwoo Im [Wed, 21 Apr 2021 07:45:04 +0000 (16:45 +0900)]
nvme: introduce generic per-namespace chardev
Userspace has not been allowed to I/O to device that's failed to
be initialized. This patch introduces generic per-namespace character
device to allow userspace to I/O regardless the block device is there or
not.
The chardev naming convention will similar to the existing blkdev naming,
using a ng prefix instead of nvme, i.e.
- /dev/ngXnY
It also supports multipath which means it will not expose chardev for the
hidden namespace blkdevs (e.g., nvmeXcYnZ). If /dev/ngXnY is created for
a ns_head, then I/O request will be routed to a specific controller
selected by the iopolicy of the subsystem.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Javier González <javier.gonz@samsung.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Tested-by: Kanchan Joshi <joshi.k@samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove a level of indentation from the main code implementating the table
search by using a goto for the APST not supported case. Also move the
main comment above the function.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
nvme: do not try to reconfigure APST when the controller is not live
Do not call nvme_configure_apst when the controller is not live, given
that nvme_configure_apst will fail due the lack of an admin queue when
the controller is being torn down and nvme_set_latency_tolerance is
called from dev_pm_qos_hide_latency_tolerance.
Fixes: 510a405d945b("nvme: fix memory leak for power latency tolerance") Reported-by: Peng Liu <liupeng17@lenovo.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org>
Hannes Reinecke [Fri, 16 Apr 2021 11:46:21 +0000 (13:46 +0200)]
nvme: add 'kato' sysfs attribute
Add a 'kato' controller sysfs attribute to display the current
keep-alive timeout value (if any). This allows userspace to identify
persistent discovery controllers, as these will have a non-zero
KATO value.
Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
Hannes Reinecke [Fri, 16 Apr 2021 11:46:20 +0000 (13:46 +0200)]
nvme: sanitize KATO setting
According to the NVMe base spec the KATO commands should be sent
at half of the KATO interval, to properly account for round-trip
times.
As we now will only ever send one KATO command per connection we
can easily use the recommended values.
This also fixes a potential issue where the request timeout for
the KATO command does not match the value in the connect command,
which might be causing spurious connection drops from the target.
Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
While the maximum size of each ramdisk is defined either as a module
parameter, or compile time default, it's impossible to know how many pages
have currently been allocated by each ram%d device, since they're
allocated when used and never freed.
This patch creates a new directory at this location:
/sys/kernel/debug/ramdisk_pages/
which will contain a file named "ram%d" for each instantiated ramdisk on
the system. The file is read-only, and read() will output the number of
pages currently held by that ramdisk.
We lose track how much memory a ramdisk is using as pages once used are
simply recycled but never freed.
In instances where we exhaust the size of the ramdisk with a file that
exceeds it, encounter ENOSPC and delete the file for mitigation; df would
show decrease in used and increase in available blocks but the since we
have touched all pages, the memory footprint of the ramdisk does not
reflect the blocks used/available count
...
[root@localhost ~]# mkfs.ext2 /dev/ram15
mke2fs 1.45.6 (20-Mar-2020)
Creating filesystem with 4096 1k blocks and 1024 inodes
[root@localhost ~]# mount /dev/ram15 /mnt/ram15/
[root@localhost ~]# cat
/sys/kernel/debug/ramdisk_pages/ram15
58
[root@kerneltest008.06.prn3 ~]# df /dev/ram15
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/ram15 3963 31 3728 1% /mnt/ram15
[root@kerneltest008.06.prn3 ~]# dd if=/dev/urandom of=/mnt/ram15/test2
bs=1M count=5
dd: error writing '/mnt/ram15/test2': No space left on device
4+0 records in
3+0 records out 4005888 bytes (4.0 MB, 3.8 MiB) copied, 0.0446614 s, 89.7 MB/s
[root@kerneltest008.06.prn3 ~]# df /mnt/ram15/
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/ram15 3963 3960 0 100% /mnt/ram15
[root@kerneltest008.06.prn3 ~]# cat
/sys/kernel/debug/ramdisk_pages/ram15
1024
[root@kerneltest008.06.prn3 ~]# rm /mnt/ram15/test2
rm: remove regular file '/mnt/ram15/test2'? y
[root@kerneltest008.06.prn3 /var]# df /dev/ram15
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/ram15 3963 31 3728 1% /mnt/ram15
This debugfs counter will always reveal the accurate number of
permanently allocated pages to the ramdisk.
Signed-off-by: Calvin Owens <calvinowens@fb.com>
[cleaned up the !CONFIG_DEBUG_FS case and API changes for HEAD] Signed-off-by: Kyle McMartin <jkkm@fb.com>
[rebased] Signed-off-by: Saravanan D <saravanand@fb.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dan Carpenter [Wed, 21 Apr 2021 10:19:45 +0000 (13:19 +0300)]
ataflop: fix off by one in ataflop_probe()
Smatch complains that the "type > NUM_DISK_MINORS" should be >=
instead of >. We also need to subtract one from "type" at the start.
Fixes: bf9c0538e485 ("ataflop: use a separate gendisk for each media format") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dan Carpenter [Wed, 21 Apr 2021 10:18:35 +0000 (13:18 +0300)]
ataflop: potential out of bounds in do_format()
The function uses "type" as an array index:
q = unit[drive].disk[type]->queue;
Unfortunately the bounds check on "type" isn't done until later in the
function. Fix this by moving the bounds check to the start.
Fixes: bf9c0538e485 ("ataflop: use a separate gendisk for each media format") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple
of warnings by explicitly adding a break statement instead of just
letting the code fall through to the next, and by adding a fallthrough
pseudo-keyword in places whre the code is intended to fall through.
During checkpatch analyzing the following warning message was found:
WARNING:STRLCPY: Prefer strscpy over strlcpy - see:
https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Fix it by using strscpy calls instead of strlcpy.
Signed-off-by: Dima Stepanov <dmitrii.stepanov@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Link: https://lore.kernel.org/r/20210419073722.15351-20-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
block/rnbd-clt-sysfs: Remove copy buffer overlap in rnbd_clt_get_path_name
cppcheck report the following error:
rnbd/rnbd-clt-sysfs.c:522:36: error: The variable 'buf' is used both
as a parameter and as destination in snprintf(). The origin and
destination buffers overlap. Quote from glibc (C-library)
documentation
(http://www.gnu.org/software/libc/manual/html_mono/libc.html#Formatted-Output-Functions):
"If copying takes place between objects that overlap as a result of a
call to sprintf() or snprintf(), the results are undefined."
[sprintfOverlappingData]
Fix it by initializing the buf variable in the first snprintf call.
Fixes: 91f4acb2801c ("block/rnbd-clt: support mapping two devices") Signed-off-by: Dima Stepanov <dmitrii.stepanov@ionos.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Link: https://lore.kernel.org/r/20210419073722.15351-19-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jack Wang [Mon, 19 Apr 2021 07:37:20 +0000 (09:37 +0200)]
block/rnbd-clt: Remove max_segment_size
We always map with SZ_4K, so do not need max_segment_size.
Cc: Leon Romanovsky <leonro@nvidia.com> Cc: linux-rdma@vger.kernel.org Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Reviewed-by: Md Haris Iqbal <haris.iqbal@ionos.com> Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20210419073722.15351-18-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
block/rnbd-clt: Generate kobject_uevent when the rnbd device state changes
When an RTRS session state changes, the transport layer generates an event
to RNBD. Then RNBD will change the state of the RNBD client device
accordingly.
This commit add kobject_uevent when the RNBD device state changes. With
this udev rules can be configured to react accordingly.
Gioh Kim [Mon, 19 Apr 2021 07:37:16 +0000 (09:37 +0200)]
block/rnbd-clt: Support polling mode for IO latency optimization
RNBD can make double-queues for irq-mode and poll-mode.
For example, on 4-CPU system 8 request-queues are created,
4 for irq-mode and 4 for poll-mode.
If the IO has HIPRI flag, the block-layer will call .poll function
of RNBD. Then IO is sent to the poll-mode queue.
Add optional nr_poll_queues argument for map_devices interface.
To support polling of RNBD, RTRS client creates connections
for both of irq-mode and direct-poll-mode.
For example, on 4-CPU system it could've create 5 connections:
con[0] => user message (softirq cq)
con[1:4] => softirq cq
After this patch, it can create 9 connections:
con[0] => user message (softirq cq)
con[1:4] => softirq cq
con[5:8] => DIRECT-POLL cq
Cc: Leon Romanovsky <leonro@nvidia.com> Cc: linux-rdma@vger.kernel.org Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com> Signed-off-by: Jack Wang <jinpu.wang@ionos.com> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20210419073722.15351-14-gi-oh.kim@ionos.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
rnbd-clt.c:1212:11: warning: Branch condition evaluates to a
garbage value
else if (!first)
^~~~~~
This is triggered in the find_and_get_or_create_sess() call
because the variable first is not initialized and the
earlier check is specifically for
if (sess == ERR_PTR(-ENOMEM))
This is false positive.
But the if-check can be reduced by initializing first to
false and then returning if the call to find_or_creat_sess()
does not set it to true. When it remains false, either
sess will be valid or not. The not case is caught by
find_and_get_or_create_sess()'s caller rnbd_clt_map_device()
sess = find_and_get_or_create_sess(...);
if (IS_ERR(sess))
return ERR_CAST(sess);
Since find_and_get_or_create_sess() initializes first to false
setting it in find_or_create_sess() is not needed.
Gioh Kim [Mon, 19 Apr 2021 07:37:13 +0000 (09:37 +0200)]
block/rnbd-srv: Remove force_close file after holding a lock
We changed the rnbd_srv_sess_dev_force_close to use try-lock
because rnbd_srv_sess_dev_force_close and process_msg_close
can generate a deadlock.
Now rnbd_srv_sess_dev_force_close would do nothing
if it fails to get the lock. So removing the force_close
file should be moved to after the lock. Or the force_close
file is removed but the others are not removed.
Gioh Kim [Mon, 19 Apr 2021 07:37:12 +0000 (09:37 +0200)]
block/rnbd-srv: Prevent a deadlock generated by accessing sysfs in parallel
We got a warning message below.
When server tries to close one session by force, it locks the sysfs
interface and locks the srv_sess lock.
The problem is that client can send a request to close at the same time.
By close request, server locks the srv_sess lock and locks the sysfs
to remove the sysfs interfaces.
The simplest way to prevent that situation could be just use
mutex_trylock.
[ 234.153965] ======================================================
[ 234.154093] WARNING: possible circular locking dependency detected
[ 234.154219] 5.4.84-storage #5.4.84-1+feature+linux+5.4.y+dbg+20201216.1319+b6b887b~deb10 Tainted: G O
[ 234.154381] ------------------------------------------------------
[ 234.154531] kworker/1:1H/618 is trying to acquire lock:
[ 234.154651] ffff8887a09db0a8 (kn->count#132){++++}, at: kernfs_remove_by_name_ns+0x40/0x80
[ 234.154819]
but task is already holding lock:
[ 234.154965] ffff8887ae5f6518 (&srv_sess->lock){+.+.}, at: rnbd_srv_rdma_ev+0x144/0x1590 [rnbd_server]
[ 234.155132]
which lock already depends on the new lock.
Colin Ian King [Thu, 15 Apr 2021 13:00:20 +0000 (14:00 +0100)]
floppy: remove redundant assignment to variable st
The variable st is being assigned a value that is never read and
it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Denis Efremov <efremov@linux.com> Acked-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20210415130020.1959951-1-colin.king@canonical.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.13/drivers
Pull MD updates from Song:
"1. mddev_find_or_alloc() clean up, from Christoph.
2. Fix NULL pointer deref with external bitmap, from Sudhakar."
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md/bitmap: wait for external bitmap writes to complete during tear down
md: do not return existing mddevs from mddev_find_or_alloc
md: refactor mddev_find_or_alloc
md: factor out a mddev_alloc_unit helper from mddev_find
Merge tag 'nvme-5.13-2021-04-15' of git://git.infradead.org/nvme into for-5.13/drivers
Pull NVMe updates from Christoph:
"nvme updates for Linux 5.13
- refactor the ioctl code
- fix a segmentation fault during io parsing error in nvmet-tcp
(Elad Grupi)
- fix NULL derefence in nvme_ctrl_fast_io_fail_tmo_show/store
(Gopal Tiwari)
- properly respect the sgl_threshold flag in nvme-pci (Niklas Cassel)
- misc cleanups (Niklas Cassel, Amit Engel, Minwoo Im, Colin Ian King)"
* tag 'nvme-5.13-2021-04-15' of git://git.infradead.org/nvme:
nvme: fix NULL derefence in nvme_ctrl_fast_io_fail_tmo_show/store
nvme: let namespace probing continue for unsupported features
nvme: factor out nvme_ns_open and nvme_ns_release helpers
nvme: move nvme_ns_head_ops to multipath.c
nvme: factor out a nvme_tryget_ns_head helper
nvme: move the ioctl code to a separate file
nvme: don't bother to look up a namespace for controller ioctls
nvme: simplify block device ioctl handling for the !multipath case
nvme: simplify the compat ioctl handling
nvme: factor out a nvme_ns_ioctl helper
nvme: pass a user pointer to nvme_nvm_ioctl
nvme: cleanup setting the disk name
nvme: add a nvme_ns_head_multipath helper
nvme: remove single trailing whitespace
nvme-multipath: remove single trailing whitespace
nvme-pci: remove single trailing whitespace
nvme-pci: don't simple map sgl when sgls are disabled
nvmet: fix a spelling mistake "nubmer" -> "number"
nvmet-fc: simplify nvmet_fc_alloc_hostport
nvmet-tcp: fix a segmentation fault during io parsing error
bio in the above stack is a bitmap write whose completion is invoked after
the tear down sequence sets the mddev structure to NULL in rdev.
During tear down, there is an attempt to flush the bitmap writes, but for
external bitmaps, there is no explicit wait for all the bitmap writes to
complete. For instance, md_bitmap_flush() is called to flush the bitmap
writes, but the last call to md_bitmap_daemon_work() in md_bitmap_flush()
could generate new bitmap writes for which there is no explicit wait to
complete those writes. The call to md_bitmap_update_sb() will return
simply for external bitmaps and the follow-up call to md_update_sb() is
conditional and may not get called for external bitmaps. This results in a
kernel panic when the completion routine, super_written() is called which
tries to reference mddev in the rdev that has been set to
NULL(in unbind_rdev_from_array() by tear down sequence).
The solution is to call md_super_wait() for external bitmaps after the
last call to md_bitmap_daemon_work() in md_bitmap_flush() to ensure there
are no pending bitmap writes before proceeding with the tear down.
Cc: stable@vger.kernel.org Signed-off-by: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com> Reviewed-by: Zhao Heming <heming.zhao@suse.com> Signed-off-by: Song Liu <song@kernel.org>
md: do not return existing mddevs from mddev_find_or_alloc
Instead of returning an existing mddev, just for it to be discarded
later directly return -EEXIST. Rename the function to mddev_alloc now
that it doesn't find an existing mddev.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
nvme: let namespace probing continue for unsupported features
Instead of failing to scan the namespace entirely when unsupported
features are detected, just mark the gendisk hidden but allow other
access like the upcoming per-namespace character device.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Javier González <javier.gonz@samsung.com>
nvme: don't bother to look up a namespace for controller ioctls
Don't bother to look up a namespace just to drop if after retreiving the
controller for the multipath case. Just look up a live controller for
the subsystem directly.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Javier González <javier.gonz@samsung.com>
Don't bother defining a separate compat_ioctl handler, and just handle
the NVME_IOCTL_SUBMIT_IO32 case inline. Also only defined it for those
ABIs (currently just i386 vs x86_64) that are affected.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Javier González <javier.gonz@samsung.com>
Return false from nvme_set_disk_name and let the caller set the
non-multipath name instead of duplicating the naming information in two
places. Also remove the pointless local variables for the disk name
and flags and the not needed ctrl argument.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Javier González <javier.gonz@samsung.com>
Minwoo Im [Wed, 7 Apr 2021 15:49:29 +0000 (17:49 +0200)]
nvme: add a nvme_ns_head_multipath helper
Move the multipath gendisk out of #ifdef CONFIG_NVME_MULTIPATH and add
a new nvme_ns_head_multipath that uses it to check if a ns_head has
a multipath device associated with it.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
[hch: added the IS_ENABLED, converted a few existing users] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Javier González <javier.gonz@samsung.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
There is a single trailing whitespace in core.c.
Since this is just a single whitespace, the chances of this affecting
backports to stable should be quite low, so let's just remove it.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
There is a single trailing whitespace in multipath.c.
Since this is just a single whitespace, the chances of this affecting
backports to stable should be quite low, so let's just remove it.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
There is a single trailing whitespace in pci.c.
Since this is just a single whitespace, the chances of this affecting
backports to stable should be quite low, so let's just remove it.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Colin Ian King [Wed, 7 Apr 2021 11:10:20 +0000 (12:10 +0100)]
nvmet: fix a spelling mistake "nubmer" -> "number"
There is a spelling mistake in a pr_err error message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Amit Engel [Mon, 22 Mar 2021 19:57:17 +0000 (21:57 +0200)]
nvmet-fc: simplify nvmet_fc_alloc_hostport
Once a host is already created, avoid allocate additional hostports that
will be thrown away. add an helper function to handle host search.
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Amit Engel <amit.engel@dell.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Elad Grupi [Wed, 31 Mar 2021 09:13:14 +0000 (17:13 +0800)]
nvmet-tcp: fix a segmentation fault during io parsing error
In case there is an io that contains inline data and it goes to
parsing error flow, command response will free command and iov
before clearing the data on the socket buffer.
This will delay the command response until receive flow is completed.
Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver") Signed-off-by: Elad Grupi <elad.grupi@dell.com> Signed-off-by: Hou Pu <houpu.main@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
lightnvm: deprecated OCSSD support and schedule it for removal in Linux 5.15
Lightnvm was an innovative idea to expose more low-level control over SSDs.
But it failed to get properly standardized and remains a non-standarized
extension to NVMe that requires vendor specific quirks for a few now mostly
obsolete SSD devices. The standardized ZNS command set for NVMe has take
over a lot of the approaches and allows for fully standardized operation.
Remove the Linux code to support open channel SSDs as the few production
deployments of the above mentioned SSDs are using userspace driver stacks
instead of the fairly limited Linux support.
Max Gurtovoy [Mon, 12 Apr 2021 09:55:23 +0000 (09:55 +0000)]
null_blk: add option for managing virtual boundary
This will enable changing the virtual boundary of null blk devices. For
now, null blk devices didn't have any restriction on the scatter/gather
elements received from the block layer. Add a module parameter and a
configfs option that will control the virtual boundary. This will
enable testing the efficiency of the block layer bounce buffer in case
a suitable application will send discontiguous IO to the given device.
In file included from /builds/linux/include/linux/scatterlist.h:9,
from /builds/linux/include/linux/dma-mapping.h:10,
from /builds/linux/drivers/cdrom/gdrom.c:16:
/builds/linux/drivers/cdrom/gdrom.c: In function 'gdrom_readdisk_dma':
/builds/linux/drivers/cdrom/gdrom.c:586:61: error: 'rq' undeclared
(first use in this function)
586 | __raw_writel(page_to_phys(bio_page(req->bio)) + bio_offset(rq->bio),
| ^~
Coly Li [Sun, 11 Apr 2021 13:43:16 +0000 (21:43 +0800)]
bcache: fix a regression of code compiling failure in debug.c
The patch "bcache: remove PTR_CACHE" introduces a compiling failure in
debug.c with following error message,
In file included from drivers/md/bcache/bcache.h:182:0,
from drivers/md/bcache/debug.c:9:
drivers/md/bcache/debug.c: In function 'bch_btree_verify':
drivers/md/bcache/debug.c:53:19: error: 'c' undeclared (first use in
this function)
bio_set_dev(bio, c->cache->bdev);
^
This patch fixes the regression by replacing c->cache->bdev by b->c->
cache->bdev.
Cast multiple variables to (int64_t) in order to give the compiler
complete information about the proper arithmetic to use. Notice that
these variables are being used in contexts that expect expressions of
type int64_t (64 bit, signed). And currently, such expressions are
being evaluated using 32-bit arithmetic.
building with 'make W=1' shows a harmless warning for each user of the
EBUG_ON() macro:
drivers/md/bcache/bset.c: In function 'bch_btree_sort_partial':
drivers/md/bcache/util.h:30:55: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body]
30 | #define EBUG_ON(cond) do { if (cond); } while (0)
| ^
drivers/md/bcache/bset.c:1312:9: note: in expansion of macro 'EBUG_ON'
1312 | EBUG_ON(oldsize >= 0 && bch_count_data(b) != oldsize);
| ^~~~~~~
Zhiqiang Liu [Sun, 11 Apr 2021 13:43:10 +0000 (21:43 +0800)]
bcache: reduce redundant code in bch_cached_dev_run()
In bch_cached_dev_run(), free(env[1])|free(env[2])|free(buf)
show up three times. This patch introduce out tag in
which free(env[1])|free(env[2])|free(buf) are only called
one time. If we need to call free() when errors occur,
we can set error code to ret, and then goto out tag directly.
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-5.13/drivers
Pull MD updates from Song:
"These patches fix a race condition with md_release() and md_open()."
* 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: split mddev_find
md: factor out a mddev_find_locked helper from mddev_find
md: md_open returns -EBUSY when entering racing area
Split mddev_find into a simple mddev_find that just finds an existing
mddev by the unit number, and a more complicated mddev_find that deals
with find or allocating a mddev.
This turns out to fix this bug reported by Zhao Heming.
----------------------------- snip ------------------------------
commit d3374825ce57 ("md: make devices disappear when they are no longer
needed.") introduced protection between mddev creating & removing. The
md_open shouldn't create mddev when all_mddevs list doesn't contain
mddev. With currently code logic, there will be very easy to trigger
soft lockup in non-preempt env.
*** env ***
kvm-qemu VM 2C1G with 2 iscsi luns
kernel should be non-preempt
*** script ***
about trigger 1 time with 10 tests
`1 node1="15sp3-mdcluster1"
2 node2="15sp3-mdcluster2"
3
4 mdadm -Ss
5 ssh ${node2} "mdadm -Ss"
6 wipefs -a /dev/sda /dev/sdb
7 mdadm -CR /dev/md0 -b clustered -e 1.2 -n 2 -l mirror /dev/sda \
/dev/sdb --assume-clean
8
9 for i in {1..100}; do
10 echo ==== $i ====;
11
12 echo "test ...."
13 ssh ${node2} "mdadm -A /dev/md0 /dev/sda /dev/sdb"
14 sleep 1
15
16 echo "clean ....."
17 ssh ${node2} "mdadm -Ss"
18 done
`
I use mdcluster env to trigger soft lockup, but it isn't mdcluster
speical bug. To stop md array in mdcluster env will do more jobs than
non-cluster array, which will leave enough time/gap to allow kernel to
run md_open.
"mdadm -A" (or other array assemble commands) will start a daemon "mdadm
--monitor" by default. When "mdadm -Ss" is running, the stop action will
wakeup "mdadm --monitor". The "--monitor" daemon will immediately get
info from /proc/mdstat. This time mddev in kernel still exist, so
/proc/mdstat still show md device, which makes "mdadm --monitor" to open
/dev/md0.
The previously "mdadm -Ss" is removing action, the "mdadm --monitor"
open action will trigger md_open which is creating action. Racing is
happening.
`<thread 1>: "mdadm -Ss"
md_release
mddev_put deletes mddev from all_mddevs
queue_work for mddev_delayed_delete
at this time, "/dev/md0" is still available for opening
<thread 2>: "mdadm --monitor ..."
md_open
+ mddev_find can't find mddev of /dev/md0, and create a new mddev and
| return.
+ trigger "if (mddev->gendisk != bdev->bd_disk)" and return
-ERESTARTSYS.
`
In non-preempt kernel, <thread 2> is occupying on current CPU. and
mddev_delayed_delete which was created in <thread 1> also can't be
schedule.
In preempt kernel, it can also trigger above racing. But kernel doesn't
allow one thread running on a CPU all the time. after <thread 2> running
some time, the later "mdadm -A" (refer above script line 13) will call
md_alloc to alloc a new gendisk for mddev. it will break md_open
statement "if (mddev->gendisk != bdev->bd_disk)" and return 0 to caller,
the soft lockup is broken.
------------------------------ snip ------------------------------
Cc: stable@vger.kernel.org Fixes: d3374825ce57 ("md: make devices disappear when they are no longer needed.") Reported-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
md: factor out a mddev_find_locked helper from mddev_find
Factor out a self-contained helper to just lookup a mddev by the dev_t
"unit".
Cc: stable@vger.kernel.org Reviewed-by: Heming Zhao <heming.zhao@suse.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org>
md: md_open returns -EBUSY when entering racing area
commit d3374825ce57 ("md: make devices disappear when they are no longer
needed.") introduced protection between mddev creating & removing. The
md_open shouldn't create mddev when all_mddevs list doesn't contain
mddev. With currently code logic, there will be very easy to trigger
soft lockup in non-preempt env.
This patch changes md_open returning from -ERESTARTSYS to -EBUSY, which
will break the infinitely retry when md_open enter racing area.
This patch is partly fix soft lockup issue, full fix needs mddev_find
is split into two functions: mddev_find & mddev_find_or_alloc. And
md_open should call new mddev_find (it only does searching job).
For more detail, please refer with Christoph's "split mddev_find" patch
in later commits.
*** env ***
kvm-qemu VM 2C1G with 2 iscsi luns
kernel should be non-preempt
I use mdcluster env to trigger soft lockup, but it isn't mdcluster
speical bug. To stop md array in mdcluster env will do more jobs than
non-cluster array, which will leave enough time/gap to allow kernel to
run md_open.
"mdadm -A" (or other array assemble commands) will start a daemon "mdadm
--monitor" by default. When "mdadm -Ss" is running, the stop action will
wakeup "mdadm --monitor". The "--monitor" daemon will immediately get
info from /proc/mdstat. This time mddev in kernel still exist, so
/proc/mdstat still show md device, which makes "mdadm --monitor" to open
/dev/md0.
The previously "mdadm -Ss" is removing action, the "mdadm --monitor"
open action will trigger md_open which is creating action. Racing is
happening.
```
<thread 1>: "mdadm -Ss"
md_release
mddev_put deletes mddev from all_mddevs
queue_work for mddev_delayed_delete
at this time, "/dev/md0" is still available for opening
<thread 2>: "mdadm --monitor ..."
md_open
+ mddev_find can't find mddev of /dev/md0, and create a new mddev and
| return.
+ trigger "if (mddev->gendisk != bdev->bd_disk)" and return
-ERESTARTSYS.
```
In non-preempt kernel, <thread 2> is occupying on current CPU. and
mddev_delayed_delete which was created in <thread 1> also can't be
schedule.
In preempt kernel, it can also trigger above racing. But kernel doesn't
allow one thread running on a CPU all the time. after <thread 2> running
some time, the later "mdadm -A" (refer above script line 13) will call
md_alloc to alloc a new gendisk for mddev. it will break md_open
statement "if (mddev->gendisk != bdev->bd_disk)" and return 0 to caller,
the soft lockup is broken.
Cc: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Zhao Heming <heming.zhao@suse.com> Signed-off-by: Song Liu <song@kernel.org>
swim3 only uses the virtual address of a bio to stash it into the data
transfer using virt_to_bus. But the ppc32 virt_to_bus just uses the
physical address with an offset. Replace virt_to_bus with a local hack
that performs the equivalent transformation and stop asking for block
layer bounce buffering.
Always use the track buffer that is already used for addresses outside
the 16MB address capability of the floppy controller. This allows to
remove a lot of code that relies on kernel virtual addresses. With
this gone there is just a single place left that looks at the bio,
which can be converted to memcpy_{from,to}_page, thus removing the need
for the extra block-layer bounce buffering for highmem pages.
The gdrom driver only has a single reference to the virtual address of
the bio data, and uses that only to get the physical address. Switch
to deriving the physical address from the page directly and thus avoid
bounce buffering highmem data.
from drivers/block/drbd/drbd_nl.c:24:
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’:
drivers/block/drbd/drbd_nl.c:1968:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
drivers/block/drbd/drbd_nl.c:930: warning: Function parameter or member 'flags' not described in 'drbd_determine_dev_size'
drivers/block/drbd/drbd_nl.c:930: warning: Function parameter or member 'rs' not described in 'drbd_determine_dev_size'
drivers/block/drbd/drbd_nl.c:1148: warning: Function parameter or member 'dc' not described in 'drbd_check_al_size'
Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210312105530.2219008-12-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lee Jones [Fri, 12 Mar 2021 10:55:29 +0000 (10:55 +0000)]
block: xen-blkfront: Demote kernel-doc abuses
Fixes the following W=1 kernel build warning(s):
drivers/block/xen-blkfront.c:1960: warning: Function parameter or member 'dev' not described in 'blkfront_probe'
drivers/block/xen-blkfront.c:1960: warning: Function parameter or member 'id' not described in 'blkfront_probe'
drivers/block/xen-blkfront.c:1960: warning: expecting prototype for Allocate the basic(). Prototype was for blkfront_probe() instead
drivers/block/xen-blkfront.c:2085: warning: Function parameter or member 'dev' not described in 'blkfront_resume'
drivers/block/xen-blkfront.c:2085: warning: expecting prototype for or a backend(). Prototype was for blkfront_resume() instead
drivers/block/xen-blkfront.c:2444: warning: wrong kernel-doc identifier on line:
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: xen-devel@lists.xenproject.org Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Roger Pau Monné <roger.pau@citrix.com> Link: https://lore.kernel.org/r/20210312105530.2219008-11-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lee Jones [Fri, 12 Mar 2021 10:55:28 +0000 (10:55 +0000)]
block: drbd: drbd_receiver: Demote less than half complete kernel-doc header
Fixes the following W=1 kernel build warning(s):
drivers/block/drbd/drbd_receiver.c:1641: warning: Function parameter or member 'op' not described in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:1641: warning: Function parameter or member 'op_flags' not described in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:1641: warning: Function parameter or member 'fault_type' not described in 'drbd_submit_peer_request'
Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210312105530.2219008-10-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lee Jones [Fri, 12 Mar 2021 10:55:27 +0000 (10:55 +0000)]
block: drbd: drbd_main: Fix a bunch of function documentation discrepancies
Fixes the following W=1 kernel build warning(s):
drivers/block/drbd/drbd_main.c:278: warning: Function parameter or member 'connection' not described in 'tl_clear'
drivers/block/drbd/drbd_main.c:278: warning: Excess function parameter 'device' description in 'tl_clear'
drivers/block/drbd/drbd_main.c:489: warning: Function parameter or member 'cpu_mask' not described in 'drbd_calc_cpu_mask'
drivers/block/drbd/drbd_main.c:528: warning: Excess function parameter 'device' description in 'drbd_thread_current_set_cpu'
drivers/block/drbd/drbd_main.c:549: warning: Function parameter or member 'connection' not described in 'drbd_header_size'
drivers/block/drbd/drbd_main.c:1204: warning: Function parameter or member 'device' not described in 'send_bitmap_rle_or_plain'
drivers/block/drbd/drbd_main.c:1204: warning: Function parameter or member 'c' not described in 'send_bitmap_rle_or_plain'
drivers/block/drbd/drbd_main.c:1335: warning: Function parameter or member 'peer_device' not described in '_drbd_send_ack'
drivers/block/drbd/drbd_main.c:1335: warning: Excess function parameter 'device' description in '_drbd_send_ack'
drivers/block/drbd/drbd_main.c:1379: warning: Function parameter or member 'peer_device' not described in 'drbd_send_ack'
drivers/block/drbd/drbd_main.c:1379: warning: Excess function parameter 'device' description in 'drbd_send_ack'
drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'connection' not described in 'drbd_send_all'
drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'sock' not described in 'drbd_send_all'
drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'buffer' not described in 'drbd_send_all'
drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'size' not described in 'drbd_send_all'
drivers/block/drbd/drbd_main.c:1892: warning: Function parameter or member 'msg_flags' not described in 'drbd_send_all'
drivers/block/drbd/drbd_main.c:3525: warning: Function parameter or member 'flags' not described in 'drbd_queue_bitmap_io'
drivers/block/drbd/drbd_main.c:3563: warning: Function parameter or member 'flags' not described in 'drbd_bitmap_io'
Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210312105530.2219008-9-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lee Jones [Fri, 12 Mar 2021 10:55:26 +0000 (10:55 +0000)]
block: drbd: drbd_nl: Make conversion to 'enum drbd_ret_code' explicit
Fixes the following W=1 kernel build warning(s):
from drivers/block/drbd/drbd_nl.c:24:
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_set_role’:
drivers/block/drbd/drbd_nl.c:793:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
drivers/block/drbd/drbd_nl.c:795:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_attach’:
drivers/block/drbd/drbd_nl.c:1965:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_connect’:
drivers/block/drbd/drbd_nl.c:2690:10: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
drivers/block/drbd/drbd_nl.c: In function ‘drbd_adm_disconnect’:
drivers/block/drbd/drbd_nl.c:2803:11: warning: implicit conversion from ‘enum drbd_state_rv’ to ‘enum drbd_ret_code’ [-Wenum-conversion]
Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210312105530.2219008-8-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lee Jones [Fri, 12 Mar 2021 10:55:25 +0000 (10:55 +0000)]
block: drbd: drbd_main: Remove duplicate field initialisation
[P_RETRY_WRITE] is initialised more than once.
Fixes the following W=1 kernel build warning(s):
drivers/block/drbd/drbd_main.c: In function ‘cmdname’:
drivers/block/drbd/drbd_main.c:3660:22: warning: initialized field overwritten [-Woverride-init]
drivers/block/drbd/drbd_main.c:3660:22: note: (near initialization for ‘cmdnames[44]’)
Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210312105530.2219008-7-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
drivers/block/drbd/drbd_receiver.c:265: warning: Function parameter or member 'peer_device' not described in 'drbd_alloc_pages'
drivers/block/drbd/drbd_receiver.c:265: warning: Excess function parameter 'device' description in 'drbd_alloc_pages'
drivers/block/drbd/drbd_receiver.c:1362: warning: Function parameter or member 'connection' not described in 'drbd_may_finish_epoch'
drivers/block/drbd/drbd_receiver.c:1362: warning: Excess function parameter 'device' description in 'drbd_may_finish_epoch'
drivers/block/drbd/drbd_receiver.c:1451: warning: Function parameter or member 'resource' not described in 'drbd_bump_write_ordering'
drivers/block/drbd/drbd_receiver.c:1451: warning: Function parameter or member 'bdev' not described in 'drbd_bump_write_ordering'
drivers/block/drbd/drbd_receiver.c:1451: warning: Excess function parameter 'connection' description in 'drbd_bump_write_ordering'
drivers/block/drbd/drbd_receiver.c:1643: warning: Function parameter or member 'op' not described in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:1643: warning: Function parameter or member 'op_flags' not described in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:1643: warning: Function parameter or member 'fault_type' not described in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:1643: warning: Excess function parameter 'rw' description in 'drbd_submit_peer_request'
drivers/block/drbd/drbd_receiver.c:3055: warning: Function parameter or member 'peer_device' not described in 'drbd_asb_recover_0p'
drivers/block/drbd/drbd_receiver.c:3138: warning: Function parameter or member 'peer_device' not described in 'drbd_asb_recover_1p'
drivers/block/drbd/drbd_receiver.c:3195: warning: Function parameter or member 'peer_device' not described in 'drbd_asb_recover_2p'
drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'peer_device' not described in 'receive_bitmap_plain'
drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'size' not described in 'receive_bitmap_plain'
drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'p' not described in 'receive_bitmap_plain'
drivers/block/drbd/drbd_receiver.c:4684: warning: Function parameter or member 'c' not described in 'receive_bitmap_plain'
drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'peer_device' not described in 'recv_bm_rle_bits'
drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'p' not described in 'recv_bm_rle_bits'
drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'c' not described in 'recv_bm_rle_bits'
drivers/block/drbd/drbd_receiver.c:4738: warning: Function parameter or member 'len' not described in 'recv_bm_rle_bits'
drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'peer_device' not described in 'decode_bitmap_c'
drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'p' not described in 'decode_bitmap_c'
drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'c' not described in 'decode_bitmap_c'
drivers/block/drbd/drbd_receiver.c:4807: warning: Function parameter or member 'len' not described in 'decode_bitmap_c'
Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210312105530.2219008-6-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lee Jones [Fri, 12 Mar 2021 10:55:23 +0000 (10:55 +0000)]
block: drbd: drbd_state: Fix some function documentation issues
Fixes the following W=1 kernel build warning(s):
drivers/block/drbd/drbd_state.c:913: warning: Function parameter or member 'connection' not described in 'is_valid_soft_transition'
drivers/block/drbd/drbd_state.c:913: warning: Excess function parameter 'device' description in 'is_valid_soft_transition'
drivers/block/drbd/drbd_state.c:1054: warning: Function parameter or member 'warn' not described in 'sanitize_state'
drivers/block/drbd/drbd_state.c:1054: warning: Excess function parameter 'warn_sync_abort' description in 'sanitize_state'
drivers/block/drbd/drbd_state.c:1703: warning: Function parameter or member 'state_change' not described in 'after_state_ch'
Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210312105530.2219008-5-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lee Jones [Fri, 12 Mar 2021 10:55:22 +0000 (10:55 +0000)]
block: mtip32xx: mtip32xx: Mark debugging variable 'start' as __maybe_unused
Fixes the following W=1 kernel build warning(s):
drivers/block/mtip32xx/mtip32xx.c: In function ‘mtip_standby_immediate’:
drivers/block/mtip32xx/mtip32xx.c:1216:16: warning: variable ‘start’ set but not used [-Wunused-but-set-variable]
Lee Jones [Fri, 12 Mar 2021 10:55:21 +0000 (10:55 +0000)]
block: drbd: drbd_interval: Demote some kernel-doc abuses and fix another header
Fixes the following W=1 kernel build warning(s):
drivers/block/drbd/drbd_interval.c:11: warning: Function parameter or member 'node' not described in 'interval_end'
drivers/block/drbd/drbd_interval.c:26: warning: Function parameter or member 'root' not described in 'drbd_insert_interval'
drivers/block/drbd/drbd_interval.c:26: warning: Function parameter or member 'this' not described in 'drbd_insert_interval'
drivers/block/drbd/drbd_interval.c:70: warning: Function parameter or member 'root' not described in 'drbd_contains_interval'
drivers/block/drbd/drbd_interval.c:96: warning: Function parameter or member 'root' not described in 'drbd_remove_interval'
drivers/block/drbd/drbd_interval.c:96: warning: Function parameter or member 'this' not described in 'drbd_remove_interval'
drivers/block/drbd/drbd_interval.c:113: warning: Function parameter or member 'root' not described in 'drbd_find_overlap'
Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: drbd-dev@lists.linbit.com Cc: linux-block@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210312105530.2219008-3-lee.jones@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge tag 'nvme-5.13-2021-04-06' of git://git.infradead.org/nvme into for-5.13/drivers
Pull NVMe updates from Christoph:
"nvme updates for Linux 5.13
- fix handling of very large MDTS values (Bart Van Assche)
- retrigger ANA log update if group descriptor isn't found
(Hannes Reinecke)
- fix locking contexts in nvme-tcp and nvmet-tcp (Sagi Grimberg)
- return proper error code from discovery ctrl (Hou Pu)
- verify the SGLS field in nvmet-tcp and nvmet-fc (Max Gurtovoy)
- disallow passthru cmd from targeting a nsid != nsid of the block dev
(Niklas Cassel)
- do not allow model_number exceed 40 bytes in nvmet (Noam Gottlieb)
- enable optional queue idle period tracking in nvmet-tcp
(Mark Wunderlich)
- various cleanups and optimizations (Chaitanya Kulkarni, Kanchan Joshi)
- expose fast_io_fail_tmo in sysfs (Daniel Wagner)
- implement non-MDTS command limits (Keith Busch)
- reduce warnings for unhandled command effects (Keith Busch)
- allocate storage for the SQE as part of the nvme_request (Keith Busch)"
* tag 'nvme-5.13-2021-04-06' of git://git.infradead.org/nvme: (33 commits)
nvme: fix handling of large MDTS values
nvme: implement non-mdts command limits
nvme: disallow passthru cmd from targeting a nsid != nsid of the block dev
nvme: retrigger ANA log update if group descriptor isn't found
nvme: export fast_io_fail_tmo to sysfs
nvme: remove superfluous else in nvme_ctrl_loss_tmo_store
nvme: use sysfs_emit instead of sprintf
nvme-fc: check sgl supported by target
nvme-tcp: check sgl supported by target
nvmet-tcp: enable optional queue idle period tracking
nvmet-tcp: fix incorrect locking in state_change sk callback
nvme-tcp: block BH in sk state_change sk callback
nvmet: return proper error code from discovery ctrl
nvme: warn of unhandled effects only once
nvme: use driver pdu command for passthrough
nvme-pci: allocate nvme_command within driver pdu
nvmet: do not allow model_number exceed 40 bytes
nvmet: remove unnecessary ctrl parameter
nvmet-fc: update function documentation
nvme-fc: fix the function documentation comment
...
Instead of triggering an integer overflow and undefined behavior if MDTS is
large, set max_hw_sectors to UINT_MAX.
Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Keith Busch <kbusch@kernel.org>
[hch: rebased to account for the new nvme_mps_to_sectors helper] Signed-off-by: Christoph Hellwig <hch@lst.de>
Keith Busch [Wed, 24 Mar 2021 23:18:05 +0000 (16:18 -0700)]
nvme: implement non-mdts command limits
Commands that access LBA contents without a data transfer between the
host historically have not had a spec defined upper limit. The driver
set the queue constraints for such commands to the max data transfer
size just to be safe, but this artificial constraint frequently limits
devices below their capabilities.
The NVMe Workgroup ratified TP4040 defines how a controller may
advertise their non-MDTS limits. Use these if provided and default to
the current constraints if not. Since the Dataset Management command
limits are defined in logical blocks, but without a namespace to tell us
the logical block size, the code defaults to the safe 512b size.
Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
projects / kernel.git / log