Linus Torvalds [Fri, 3 Jun 2022 21:20:28 +0000 (14:20 -0700)]
Merge tag 'arm-multiplatform-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull yet more ARM multiplatform updates from Arnd Bergmann:
"This is the third and final bit of the multiplatform conversion for
ARMv5, finishing off OMAP1. One patch enables the common-clk
interface, and the other ones does the Kconfig change.
These were waiting on a few dependencies to trickle in for common-clk,
and the last one of those was in the USB tree"
* tag 'arm-multiplatform-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: omap1: enable multiplatform
ARM: OMAP1: clock: Convert to CCF
Linus Torvalds [Fri, 3 Jun 2022 21:09:21 +0000 (14:09 -0700)]
Merge tag 'loongarch-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull initial Loongarch architecture code from Arnd Bergmann:
"This is the majority of the loongarch architecture code, including the
final system call interface and all core functionality.
It still misses three sets of peripheral but vital patches to add
support for other subsystems, which have yet to pass review:
- The drivers/firmware/efi stub for booting from a standard UEFI
firmware implementation. Both the original custom boot interface
and a draft implementation of the EFI stub did not make it, so it
is currently impossible to boot the kernel, until the loongarch
specific portions get accepted into the UEFI subsystem
- The drivers/irqchip/irq-loongson-*.c drivers are shared with the
the MIPS port, but currently lack support for ACPI based booting,
which will get merged through the irqchip subsystem.
- Similarly, the drivers/pci/controller/pci-loongson.c needs to be
modified for ACPI support, which will be merged through the PCI
subsystem.
While the port cannot actually be used before all the above are
merged, having it in 5.19 helps to establish the user space ABI for
the libc ports to build on, and to help any treewide changes in the
mainline kernel get applied here as well.
A gcc-12 based tool chains for build testing is now included in
Original description from Huacai Chen:
"LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.
LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit
version (LA32S) and a 64-bit version (LA64). LoongArch use ACPI as its
boot protocol LoongArch-specific interrupt controllers (similar to APIC)
are already added in the next revision of ACPI Specification (current
revision is 6.4).
This patchset is adding basic LoongArch support in mainline kernel, we
can see a complete snapshot here:
Link: https://lore.kernel.org/lkml/20220603072053.35005-1-chenhuacai@loongson.cn/
* tag 'loongarch-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
MAINTAINERS: Add maintainer information for LoongArch
LoongArch: Add Loongson-3 default config file
LoongArch: Add Non-Uniform Memory Access (NUMA) support
LoongArch: Add multi-processor (SMP) support
LoongArch: Add VDSO and VSYSCALL support
LoongArch: Add some library functions
LoongArch: Add misc common routines
LoongArch: Add ELF and module support
LoongArch: Add signal handling support
LoongArch: Add system call support
LoongArch: Add memory management
LoongArch: Add process management
LoongArch: Add exception/interrupt handling
LoongArch: Add boot and setup routines
LoongArch: Add other common headers
LoongArch: Add atomic/locking headers
LoongArch: Add CPU definition headers
LoongArch: Add build infrastructure
LoongArch: Add writecombine support for drm
LoongArch: Add ELF-related definitions
...
- Skip SVE kselftest if not sufficient vector lengths supported"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
kselftest/arm64: signal: Skip SVE signal test if not enough VLs supported
arm64: Initialize jump labels before setup_machine_fdt()
arm64: hibernate: Fix syntax errors in comments
arm64: Remove the __user annotation for the restore_za_context() argument
ftrace/fgraph: fix increased missing-prototypes warnings
Linus Torvalds [Fri, 3 Jun 2022 21:01:43 +0000 (14:01 -0700)]
Merge tag 'riscv-for-linus-5.19-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
"This is mostly some DT updates, but also a handful of cleanups and
some fixes. The most user-visible of those are:
- A device tree for the Sundance Polarberry, along with a handful of
fixes and clenups to the PolarFire SOC device trees and bindings.
- The memfd_secret syscall number is now visible to userspace,
- Some improvements to the vm layout dump, which really should have
followed shortly after the sv48 patches but I missed"
* tag 'riscv-for-linus-5.19-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Move alternative length validation into subsection
riscv: mm: init: make pt_ops_set_[early|late|fixmap] static
riscv: move errata/ and kvm/ builds to arch/riscv/Kbuild
RISC-V: Mark IORESOURCE_EXCLUSIVE for reserved mem instead of IORESOURCE_BUSY
riscv: Wire up memfd_secret in UAPI header
riscv: Fix irq_work when SMP is disabled
riscv: Improve virtual kernel memory layout dump
riscv: Initialize thread pointer before calling C functions
Documentation: riscv: Add sv48 description to VM layout
RISC-V: Only default to spinwait on SBI-0.1 and M-mode
riscv: dts: icicle: sort nodes alphabetically
riscv: microchip: icicle: readability fixes
riscv: dts: microchip: add the sundance polarberry
dt-bindings: riscv: microchip: add polarberry compatible string
dt-bindings: vendor-prefixes: add Sundance DSP
riscv: dts: microchip: make the fabric dtsi board specific
dt-bindings: riscv: microchip: document icicle reference design
riscv: dts: microchip: remove soc vendor from filenames
riscv: dts: microchip: move sysctrlr out of soc bus
riscv: dts: microchip: remove icicle memory clocks
Linus Torvalds [Fri, 3 Jun 2022 20:57:50 +0000 (13:57 -0700)]
Merge tag 's390-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
"Just a couple of small improvements, bug fixes and cleanups:
- Add Eric Farman as maintainer for s390 virtio drivers.
- Improve machine check handling, and avoid incorrectly injecting a
machine check into a kvm guest.
- Add cond_resched() call to gmap page table walker in order to avoid
possible huge latencies. Also use non-quiesing sske instruction to
speed up storage key handling.
- Add __GFP_NORETRY to KEXEC_CONTROL_MEMORY_GFP so s390 behaves
similar like common code.
- Get sie control block address from correct stack slot in perf event
code. This fixes potential random memory accesses.
- Change uaccess code so that the exception handler sets the result
of get_user() and __get_kernel_nofault() to zero in case of a
fault. Until now this was done via input parameters for inline
assemblies. Doing it via fault handling is what most or even all
other architectures are doing.
- Couple of other small cleanups and fixes"
* tag 's390-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/stack: add union to reflect kvm stack slot usages
s390/stack: merge empty stack frame slots
s390/uaccess: whitespace cleanup
s390/uaccess: use __noreturn instead of __attribute__((noreturn))
s390/uaccess: use exception handler to zero result on get_user() failure
s390/uaccess: use symbolic names for inline assembler operands
s390/mcck: isolate SIE instruction when setting CIF_MCCK_GUEST flag
s390/mm: use non-quiescing sske for KVM switch to keyed guest
s390/gmap: voluntarily schedule during key setting
MAINTAINERS: Update s390 virtio-ccw
s390/kexec: add __GFP_NORETRY to KEXEC_CONTROL_MEMORY_GFP
s390/Kconfig.debug: fix indentation
s390/Kconfig: fix indentation
s390/perf: obtain sie_block from the right address
s390: generate register offsets into pt_regs automatically
s390: simplify early program check handler
s390/crypto: fix scatterwalk_unmap() callers in AES-GCM
Linus Torvalds [Fri, 3 Jun 2022 20:39:30 +0000 (13:39 -0700)]
Merge tag 'efi-next-for-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull more EFI updates from Ard Biesheuvel:
"Follow-up tweaks for EFI changes - they mostly address issues
introduced this merge window, except for Heinrich's patch:
- fix new DXE service invocations for mixed mode
- use correct Kconfig symbol when setting PE header flag
- clean up the drivers/firmware/efi Kconfig dependencies so that
features that depend on CONFIG_EFI are hidden from the UI when the
symbol is not enabled.
Also included is a RISC-V bugfix from Heinrich to avoid read-write
mappings of read-only firmware regions in the EFI page tables"
* tag 'efi-next-for-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: clean up Kconfig dependencies on CONFIG_EFI
efi/x86: libstub: Make DXE calls mixed mode safe
efi: x86: Fix config name for setting the NX-compatibility flag in the PE header
riscv: read-only pages should not be writable
Saravana Kannan [Fri, 3 Jun 2022 11:31:38 +0000 (13:31 +0200)]
driver core: Set default deferred_probe_timeout back to 0.
Since we had to effectively reverted
commit a0d279236f01 ("driver core: Ensure wait_for_device_probe() waits
until the deferred_probe_timeout fires") in an earlier patch, a non-zero
deferred_probe_timeout will break NFS rootfs mounting [1] again. So, set
the default back to zero until we can fix that.
Mounting NFS rootfs was timing out when deferred_probe_timeout was
non-zero [1]. This was because ip_auto_config() initcall times out
waiting for the network interfaces to show up when
deferred_probe_timeout was non-zero. While ip_auto_config() calls
wait_for_device_probe() to make sure any currently running deferred
probe work or asynchronous probe finishes, that wasn't sufficient to
account for devices being deferred until deferred_probe_timeout.
Commit a0d279236f01 ("driver core: Ensure wait_for_device_probe() waits
until the deferred_probe_timeout fires") tried to fix that by making
sure wait_for_device_probe() waits for deferred_probe_timeout to expire
before returning.
However, if wait_for_device_probe() is called from the kernel_init()
context:
- Before deferred_probe_initcall() [2], it causes the boot process to
hang due to a deadlock.
- After deferred_probe_initcall() [3], it blocks kernel_init() from
continuing till deferred_probe_timeout expires and beats the point of
deferred_probe_timeout that's trying to wait for userspace to load
modules.
Neither of this is good. So revert the changes to
wait_for_device_probe().
Arnd Bergmann [Mon, 30 May 2022 12:46:17 +0000 (14:46 +0200)]
ARM: omap1: enable multiplatform
With all the header files out of the way, and the clock driver
converted to the common framework, nothing stops us from building
OMAP together with the other platforms.
As usual, the decompressor support is a victim here, and is
only available when CONFIG_DEBUG_LL is configured for the
particular board.
Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
OMAP1 still uses its own implementation of standard clock API defined in
include/linux/clk.h. Internals of that implementation are not visible
outside OMAP1 directory. As a consequence, device drivers are not able to
register clocks potentially provided by peripheral devices.
Drop OMAP1 implementation of the clock API and enable common clock
framework. Modify the remaining low level code to be compatible with
clock provider API and register the clocks with CCF.
Move initialisation of clocks to omap1_timer_init() to avoid memory
allocation issues at early setup phase from where omap1_init_early() is
called. Register the clocks after initialization of clock I/O registers,
local clock pointers used by OMAP1 clock ops, and local .rate fields of
clocks with no local implementation of .recalc ops, so CCF structures are
populated with correct data during clock registration. Instead of
enabling some of the registered clocks, flag them for CCF as critical.
Introduce .is_enabled op using code that verifies hardware status of clock
enablement, split out from implementation of .disable_unused op, so the
latter is actually called by CCF for not requested but hardware enabled
clocks. Add .round_rate ops where missing so .set_rate ops are called by
CCF as expected. Since CCF allows parallel execution of .enable/.disable
and .set_rate ops, protect registers shared among those groups of ops from
concurrent access with spinlocks. Drop local debugfs support in favor of
that provided by CCF.
v2: flag tc2_ck as CLK_IS_CRITICAL (Aaro)
v3: rebase on top of soc/omap1-multiplatform-5.18,
- drop no longer needed includes from arch/arm/mach-omap1/io.c
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Torvalds [Fri, 3 Jun 2022 18:48:47 +0000 (11:48 -0700)]
Merge tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the set of driver core changes for 5.19-rc1.
Lots of tiny driver core changes and cleanups happened this cycle, but
the two major things are:
- firmware_loader reorganization and additions including the ability
to have XZ compressed firmware images and the ability for userspace
to initiate the firmware load when it needs to, instead of being
always initiated by the kernel. FPGA devices specifically want this
ability to have their firmware changed over the lifetime of the
system boot, and this allows them to work without having to come up
with yet-another-custom-uapi interface for loading firmware for
them.
- physical location support added to sysfs so that devices that know
this information, can tell userspace where they are located in a
common way. Some ACPI devices already support this today, and more
bus types should support this in the future.
Smaller changes include:
- driver_override api cleanups and fixes
- error path cleanups and fixes
- get_abi script fixes
- deferred probe timeout changes.
It's that last change that I'm the most worried about. It has been
reported to cause boot problems for a number of systems, and I have a
tested patch series that resolves this issue. But I didn't get it
merged into my tree before 5.18-final came out, so it has not gotten
any linux-next testing.
I'll send the fixup patches (there are 2) as a follow-on series to this
pull request.
All have been tested in linux-next for weeks, with no reported issues
other than the above-mentioned boot time-outs"
* tag 'driver-core-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
driver core: fix deadlock in __device_attach
kernfs: Separate kernfs_pr_cont_buf and rename_lock.
topology: Remove unused cpu_cluster_mask()
driver core: Extend deferred probe timeout on driver registration
MAINTAINERS: add Russ Weight as a firmware loader maintainer
driver: base: fix UAF when driver_attach failed
test_firmware: fix end of loop test in upload_read_show()
driver core: location: Add "back" as a possible output for panel
driver core: location: Free struct acpi_pld_info *pld
driver core: Add "*" wildcard support to driver_async_probe cmdline param
driver core: location: Check for allocations failure
arch_topology: Trace the update thermal pressure
kernfs: Rename kernfs_put_open_node to kernfs_unlink_open_file.
export: fix string handling of namespace in EXPORT_SYMBOL_NS
rpmsg: use local 'dev' variable
rpmsg: Fix calling device_lock() on non-initialized device
firmware_loader: describe 'module' parameter of firmware_upload_register()
firmware_loader: Move definitions from sysfs_upload.h to sysfs.h
firmware_loader: Fix configs for sysfs split
selftests: firmware: Add firmware upload selftests
...
Linus Torvalds [Fri, 3 Jun 2022 18:36:34 +0000 (11:36 -0700)]
Merge tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / other smaller driver subsystem updates from Greg KH:
"Here is the large set of char, misc, and other driver subsystem
updates for 5.19-rc1. The merge request for this has been delayed as I
wanted to get lots of linux-next testing due to some late arrivals of
changes for the habannalabs driver.
Highlights of this merge are:
- habanalabs driver updates for new hardware types and fixes and
other updates
- IIO driver tree merge which includes loads of new IIO drivers and
cleanups and additions
- PHY driver tree merge with new drivers and small updates to
existing ones
- interconnect driver tree merge with fixes and updates
- soundwire driver tree merge with some small fixes
- coresight driver tree merge with small fixes and updates
- mhi bus driver tree merge with lots of updates and new device
support
- firmware driver updates
- fpga driver updates
- lkdtm driver updates (with a merge conflict, more on that below)
- extcon driver tree merge with small updates
- lots of other tiny driver updates and fixes and cleanups, full
details in the shortlog.
All of these have been in linux-next for almost 2 weeks with no
reported problems"
* tag 'char-misc-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (387 commits)
habanalabs: use separate structure info for each error collect data
habanalabs: fix missing handle shift during mmap
habanalabs: remove hdev from hl_ctx_get args
habanalabs: do MMU prefetch as deferred work
habanalabs: order memory manager messages
habanalabs: return -EFAULT on copy_to_user error
habanalabs: use NULL for eventfd
habanalabs: update firmware header
habanalabs: add support for notification via eventfd
habanalabs: add topic to memory manager buffer
habanalabs: handle race in driver fini
habanalabs: add device memory scrub ability through debugfs
habanalabs: use unified memory manager for CB flow
habanalabs: unified memory manager new code for CB flow
habanalabs/gaudi: set arbitration timeout to a high value
habanalabs: add put by handle method to memory manager
habanalabs: hide memory manager page shift
habanalabs: Add separate poll interval value for protocol
habanalabs: use get_task_pid() to take PID
habanalabs: add prefetch flag to the MAP operation
...
Linus Torvalds [Fri, 3 Jun 2022 18:17:49 +0000 (11:17 -0700)]
Merge tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for
the USB core, but there are the usual "hot spots" of development
activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes.
It seems this driver will never be finished given that the IP core
is showing up in zillions of new devices and each implementation
decides to do something different with it...
- uvc gadget driver updates as more devices start to use and rely on
this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems"
* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
USB: new quirk for Dell Gen 2 devices
usb: dwc3: core: Add error log when core soft reset failed
usb: dwc3: gadget: Move null pinter check to proper place
usb: hub: Simplify error and success path in port_over_current_notify
usb: cdns3: allocate TX FIFO size according to composite EP number
usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
usb: Probe EHCI, OHCI controllers asynchronously
usb: isp1760: Fix out-of-bounds array access
xhci: Don't defer primary roothub registration if there is only one roothub
USB: serial: option: add Quectel BG95 modem
USB: serial: pl2303: fix type detection for odd device
xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
xhci: Remove quirk for over 10 year old evaluation hardware
xhci: prevent U2 link power state if Intel tier policy prevented U1
xhci: use generic command timer for stop endpoint commands.
usb: host: xhci-plat: omit shared hcd if either root hub has no ports
usb: host: xhci-plat: prepare operation w/o shared hcd
usb: host: xhci-plat: create shared hcd after having added main hcd
xhci: prepare for operation w/o shared hcd
xhci: factor out parts of xhci_gen_setup()
...
Linus Torvalds [Fri, 3 Jun 2022 17:44:43 +0000 (10:44 -0700)]
Merge tag 'staging-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 5.19-rc1.
Lots of forward progress happened this development cycle, one driver
(wfx wireless driver) got merged into the real portion of the kernel,
and another one (unisys) was removed as no one is around anymore to
take care of it and no one has the hardware. Combined with loads of
tiny driver cleanups overall we removed 13k lines of code from the
tree, a nice improvement.
Other than the wfx and unisys driver changes the major points of this
merge is:
- r8188eu driver cleanups. So many cleanups. It's amazing just how
many things have been cleaned up here, and yet, how many remain to
go. Lots of work happened here, and it doesn't look to slow down
any time soon.
- other wifi driver cleanups. Not as many as the r8188eu driver, but
still pretty impressive from a janitorial point of view.
- bcm2853 driver cleanups
- other very minor driver cleanups
All of these have been in the linux-next tree for weeks with no
reported issues"
* tag 'staging-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (363 commits)
staging: r8188eu: remove include/rtw_debug.h
staging: r8188eu: prevent ->Ssid overflow in rtw_wx_set_scan()
staging: r8188eu: delete rtw_wx_read/write32()
staging: r8188eu: Remove multiple assignments
staging: r8188eu: add check for kzalloc
staging: r8188eu: fix warnings in rtw_wlan_util
staging: r8188eu: fix warnings in rtw_pwrctrl
staging: r8188eu: fix warnings in rtw_p2p
staging: rtl8712: fix uninit-value in r871xu_drv_init()
staging: rtl8712: fix uninit-value in usb_read8() and friends
staging: rtl8712: add error handler in r8712_usbctrl_vendorreq()
staging: r8188eu: remove _drv_ defines from include/rtw_debug.h
staging: vc04_services: remove unused macro
staging: rtl8192u: remove null check after call container_of()
staging: rtl8192e: remove null check after call container_of()
staging: ks7010: remove null check after call container_of()
staging: r8188eu: remove HW_VAR_AC_PARAM_BE from SetHwReg8188EU()
staging: r8188eu: assoc_rsp and assoc_rsp_len are not used
staging: r8188eu: last_rx_mgnt_pkts is set but not used
staging: r8188eu: simplify error handling in recv_func_prehandle
...
Linus Torvalds [Fri, 3 Jun 2022 17:34:34 +0000 (10:34 -0700)]
Merge tag 'spdx-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull SPDX updates from Greg KH:
"Here are some SPDX license marker changes.
The SPDX-labeling effort has started to pick up again, so here are
some changes for various parts of the tree that are related to this
effort.
Included in here are:
- freevxfs license updates
- spihash.c license cleanups
- spdxcheck script updates to make things easier to work with going
forward
All of the license updates came from the original authors/copyright
holders of the code involved.
All of these have been in linux-next for weeks with no reported
issues"
* tag 'spdx-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
siphash: add SPDX tags as sole licensing authority
scripts/spdxcheck: Exclude top-level README
scripts/spdxcheck: Exclude MAINTAINERS/CREDITS
scripts/spdxcheck: Exclude config directories
scripts/spdxcheck: Put excluded files and directories into a separate file
scripts/spdxcheck: Add option to display files without SPDX
scripts/spdxcheck: Add [sub]directory statistics
scripts/spdxcheck: Add directory statistics
scripts/spdxcheck: Add percentage to statistics
freevxfs: relicense to GPLv2 only
Linus Torvalds [Fri, 3 Jun 2022 17:25:56 +0000 (10:25 -0700)]
Merge tag 'for-5.19/drivers-2022-06-02' of git://git.kernel.dk/linux-block
Pull more block driver updates from Jens Axboe:
"A collection of stragglers that were late on sending in their changes
and just followup fixes.
- NVMe fixes pull request via Christoph:
- set controller enable bit in a separate write (Niklas Cassel)
- disable namespace identifiers for the MAXIO MAP1001 (Christoph)
- fix a comment typo (Julia Lawall)"
- MD fixes pull request via Song:
- Remove uses of bdevname (Christoph Hellwig)
- Bug fixes (Guoqing Jiang, and Xiao Ni)
- bcache fixes series (Coly)
- null_blk zoned write fix (Damien)
- nbd fixes (Yu, Zhang)
- Fix for loop partition scanning (Christoph)"
* tag 'for-5.19/drivers-2022-06-02' of git://git.kernel.dk/linux-block: (23 commits)
block: null_blk: Fix null_zone_write()
nvmet: fix typo in comment
nvme: set controller enable bit in a separate write
nvme-pci: disable namespace identifiers for the MAXIO MAP1001
bcache: avoid unnecessary soft lockup in kworker update_writeback_rate()
nbd: use pr_err to output error message
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
nbd: fix io hung while disconnecting device
nbd: don't clear 'NBD_CMD_INFLIGHT' flag if request is not completed
nbd: fix race between nbd_alloc_config() and module removal
nbd: call genl_unregister_family() first in nbd_cleanup()
md: bcache: check the return value of kzalloc() in detached_dev_do_request()
bcache: memset on stack variables in bch_btree_check() and bch_sectors_dirty_init()
block, loop: support partitions without scanning
bcache: avoid journal no-space deadlock by reserving 1 journal bucket
bcache: remove incremental dirty sector counting for bch_sectors_dirty_init()
bcache: improve multithreaded bch_sectors_dirty_init()
bcache: improve multithreaded bch_btree_check()
md: fix double free of io_acct_set bioset
md: Don't set mddev private to NULL in raid0 pers->free
...
Linus Torvalds [Fri, 3 Jun 2022 17:21:43 +0000 (10:21 -0700)]
Merge tag 'for-5.19/block-exec-2022-06-02' of git://git.kernel.dk/linux-block
Pull block request execute cleanups from Jens Axboe:
"This change was advertised in the initial core block pull request, but
didn't actually make that branch as we deferred it to a post-merge
pull request to avoid a bunch of cross branch issues.
This series cleans up the block execute path quite nicely"
* tag 'for-5.19/block-exec-2022-06-02' of git://git.kernel.dk/linux-block:
blk-mq: remove the done argument to blk_execute_rq_nowait
blk-mq: avoid a mess of casts for blk_end_sync_rq
blk-mq: remove __blk_execute_rq_nowait
Linus Torvalds [Fri, 3 Jun 2022 17:14:48 +0000 (10:14 -0700)]
Merge tag 'for-5.19/block-2022-06-02' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Just a collection of fixes that have been queued up since the initial
merge window pull request, the majority of which are targeted for
stable as well.
One bio_set fix that fixes an issue with the dm adoption of cached bio
structs that got introduced in this merge window"
* tag 'for-5.19/block-2022-06-02' of git://git.kernel.dk/linux-block:
block: Fix potential deadlock in blk_ia_range_sysfs_show()
block: fix bio_clone_blkg_association() to associate with proper blkcg_gq
block: remove useless BUG_ON() in blk_mq_put_tag()
blk-mq: do not update io_ticks with passthrough requests
block: make bioset_exit() fully resilient against being called twice
block: use bio_queue_enter instead of blk_queue_enter in bio_poll
block: document BLK_STS_AGAIN usage
block: take destination bvec offsets into account in bio_copy_data_iter
blk-iolatency: Fix inflight count imbalances and IO hangs on offline
blk-mq: don't touch ->tagset in blk_mq_get_sq_hctx
Linus Torvalds [Fri, 3 Jun 2022 17:10:38 +0000 (10:10 -0700)]
Merge tag 'io_uring-5.19-2022-06-02' of git://git.kernel.dk/linux-block
Pull more io_uring updates from Jens Axboe:
- A small series with some prep patches for the upcoming 5.20 split of
the io_uring.c file. No functional changes here, just minor bits that
are nice to get out of the way now (me)
- Fix for a memory leak in high numbered provided buffer groups,
introduced in the merge window (me)
- Wire up the new socket opcode for allocated direct descriptors,
making it consistent with the other opcodes that can instantiate a
descriptor (me)
- Fix for the inflight tracking, should go into 5.18-stable as well
(me)
- Fix for a deadlock for io-wq offloaded file slot allocations (Pavel)
- Direct descriptor failure fput leak fix (Xiaoguang)
- Fix for the direct descriptor allocation hinting in case of
unsuccessful install (Xiaoguang)
* tag 'io_uring-5.19-2022-06-02' of git://git.kernel.dk/linux-block:
io_uring: reinstate the inflight tracking
io_uring: fix deadlock on iowq file slot alloc
io_uring: let IORING_OP_FILES_UPDATE support choosing fixed file slots
io_uring: defer alloc_hint update to io_file_bitmap_set()
io_uring: ensure fput() called correspondingly when direct install fails
io_uring: wire up allocated direct descriptors for socket
io_uring: fix a memory leak of buffer group list on exit
io_uring: move shutdown under the general net section
io_uring: unify calling convention for async prep handling
io_uring: add io_op_defs 'def' pointer in req init and issue
io_uring: make prep and issue side of req handlers named consistently
io_uring: make timeout prep handlers consistent with other prep handlers
Linus Torvalds [Fri, 3 Jun 2022 17:02:52 +0000 (10:02 -0700)]
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"vhost,virtio and vdpa features, fixes, and cleanups:
- mac vlan filter and stats support in mlx5 vdpa
- irq hardening in virtio
- performance improvements in virtio crypto
- polling i/o support in virtio blk
- ASID support in vhost
- fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits)
vdpa: ifcvf: set pci driver data in probe
vdpa/mlx5: Add RX MAC VLAN filter support
vdpa/mlx5: Remove flow counter from steering
vhost: rename vhost_work_dev_flush
vhost-test: drop flush after vhost_dev_cleanup
vhost-scsi: drop flush after vhost_dev_cleanup
vhost_vsock: simplify vhost_vsock_flush()
vhost_test: remove vhost_test_flush_vq()
vhost_net: get rid of vhost_net_flush_vq() and extra flush calls
vhost: flush dev once during vhost_dev_stop
vhost: get rid of vhost_poll_flush() wrapper
vhost-vdpa: return -EFAULT on copy_to_user() failure
vdpasim: Off by one in vdpasim_set_group_asid()
virtio: Directly use ida_alloc()/free()
virtio: use WARN_ON() to warning illegal status value
virtio: harden vring IRQ
virtio: allow to unbreak virtqueue
virtio-ccw: implement synchronize_cbs()
virtio-mmio: implement synchronize_cbs()
virtio-pci: implement synchronize_cbs()
...
Linus Torvalds [Fri, 3 Jun 2022 16:56:53 +0000 (09:56 -0700)]
Merge tag 'sound-fix-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 5.19 merge window. Nothing particular
stands out, as most changes are device-specific fixes and quirks"
* tag 'sound-fix-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
selftests: alsa: Handle pkg-config failure more gracefully
ALSA: usb-audio: Optimize TEAC clock quirk
ASoC: da7219: cancel AAD related work earlier for jack removal
ASoC: da7219: Fix pole orientation detection on certain headsets
ASoC: Intel: avs: Fix build error on arc, m68k and sparc
ALSA: hda/realtek - Fix microphone noise on ASUS TUF B550M-PLUS
ALSA: hda/via: Delete does not require return
ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9520 laptop
ASoC: Intel: common: fix typo for tplg naming
ALSA: usb-audio: Cancel pending work at closing a MIDI substream
ALSA: usb-audio: Add mixer mapping for Gigabyte B450/550 Mobos
ASoC: rt5640: Do not manipulate pin "Platform Clock" if the "Platform Clock" is not in the DAPM
ASoC: SOF: amd: Fixed Build error
ASoC: fsl_sai: Fix FSL_SAI_xDR/xFR definition
ASoC: soc-pcm: fix BE transition for TRIGGER_START
Linus Torvalds [Fri, 3 Jun 2022 16:49:29 +0000 (09:49 -0700)]
Merge tag 'drm-next-2022-06-03-1' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Dave Airlie:
"This is mostly regular fixes, msm and amdgpu. There is a tegra patch
that is bit of prep work for a 5.20 feature to avoid some inter-tree
syncs, and a couple of late addition amdgpu uAPI changes but best to
get those in early, and the userspace pieces are ready.
msm:
- Limiting WB modes to max sspp linewidth
- Fixing the supported rotations to add 180 back for IGT
- Fix to handle pm_runtime_get_sync() errors to avoid unclocked
access in the bind() path for dpu driver
- Fix the irq_free() without request issue which was a big-time
hitter in the CI-runs.
amdgpu:
- Update fdinfo to the common drm format
- uapi:
- Add VM_NOALLOC GPUVM attribute to prevent buffers for going
into the MALL
- Add AMDGPU_GEM_CREATE_DISCARDABLE flag to create buffers that
can be discarded on eviction
- Mesa code which uses these:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/16466
- Link training fixes
- DPIA fixes
- Misc code cleanups
- Aux fixes
- Hotplug fixes
- More FP clean up
- Misc GFX9/10 fixes
- Fix a possible memory leak in SMU shutdown
- SMU 13 updates
- RAS fixes
- TMZ fixes
- GC 11 updates
- SMU 11 metrics fixes
- Fix coverage blend mode for overlay plane
- Note DDR vs LPDDR memory
- Fuzz fix for CS IOCTL
- Add new PCI DID
amdkfd:
- Clean up hive setup
- Misc fixes
tegra:
- add some prelim 5.20 work to avoid inter-tree mess"
* tag 'drm-next-2022-06-03-1' of git://anongit.freedesktop.org/drm/drm: (57 commits)
drm/msm/dpu: Move min BW request and full BW disable back to mdss
drm/msm/dpu: Fix pointer dereferenced before checking
drm/msm/dpu: Remove unused code
drm/msm/disp/dpu1: remove superfluous init
drm/msm/dp: Always clear mask bits to disable interrupts at dp_ctrl_reset_irq_ctrl()
gpu: host1x: Add context bus
drm/amdgpu: add drm-client-id to fdinfo v2
drm/amdgpu: Convert to common fdinfo format v5
drm/amdgpu: bump minor version number
drm/amdgpu: add AMDGPU_VM_NOALLOC v2
drm/amdgpu: add AMDGPU_GEM_CREATE_DISCARDABLE
drm/amdgpu: add beige goby PCI ID
drm/amd/pm: Return auto perf level, if unsupported
drm/amdkfd: fix typo in comment
drm/amdgpu/gfx: fix typos in comments
drm/amdgpu/cs: make commands with 0 chunks illegal behaviour.
drm/amdgpu: differentiate between LP and non-LP DDR memory
drm/amdgpu: Resolve pcie_bif RAS recovery bug
drm/amdgpu: clean up asd on the ta_firmware_header_v2_0
drm/amdgpu/discovery: validate VCN and SDMA instances
...
Huacai Chen [Tue, 31 May 2022 10:04:12 +0000 (18:04 +0800)]
LoongArch: Add Non-Uniform Memory Access (NUMA) support
Add Non-Uniform Memory Access (NUMA) support for LoongArch. LoongArch
has 48-bit physical address, but the HyperTransport I/O bus only support
40-bit address, so we need a custom phys_to_dma() and dma_to_phys() to
extract the 4-bit node id (bit 44~47) from Loongson-3's 48-bit physical
address space and embed it into 40-bit. In the 40-bit dma address, node
id offset can be read from the LS7A_DMA_CFG register.
Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Tue, 31 May 2022 10:04:11 +0000 (18:04 +0800)]
LoongArch: Add misc common routines
Add some misc common routines for LoongArch, including: asm-offsets
routines, futex functions, i/o memory access functions, frame-buffer
functions, procfs information display, etc.
Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Tue, 31 May 2022 10:04:11 +0000 (18:04 +0800)]
LoongArch: Add signal handling support
Add ucontext/sigcontext definition and signal handling support for
LoongArch.
Cc: Eric Biederman <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Tue, 31 May 2022 10:04:11 +0000 (18:04 +0800)]
LoongArch: Add system call support
Add system call support and related uaccess.h for LoongArch.
Q: Why keep _ARCH_WANT_SYS_CLONE definition while there is clone3:
A: The latest glibc release has some basic support for clone3 but it is
not complete. E.g., pthread_create() and spawni() have converted to
use clone3 but fork() will still use clone. Moreover, some seccomp
related applications can still not work perfectly with clone3. E.g.,
Chromium sandbox cannot work at all and there is no solution for it,
which is more terrible than the fork() story [1].
Huacai Chen [Tue, 31 May 2022 10:04:11 +0000 (18:04 +0800)]
LoongArch: Add boot and setup routines
Add basic boot, setup and reset routines for LoongArch. Now, LoongArch
machines use UEFI-based firmware. The firmware passes configuration
information to the kernel via ACPI and DMI/SMBIOS.
Currently an existing interface between the kernel and the bootloader
is implemented. Kernel gets 2 values from the bootloader, passed in
registers a0 and a1; a0 is an "EFI boot flag" distinguishing UEFI and
non-UEFI firmware, while a1 is a pointer to an FDT with systable,
memmap, cmdline and initrd information.
The standard UEFI boot protocol (EFISTUB) will be added later.
Cc: linux-efi@vger.kernel.org Cc: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Yun Liu <liuyun@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Tue, 31 May 2022 10:04:10 +0000 (18:04 +0800)]
LoongArch: Add writecombine support for drm
LoongArch maintains cache coherency in hardware, but its WUC attribute
(Weak-ordered UnCached, which is similar to WC) is out of the scope of
cache coherency machanism. This means WUC can only used for write-only
memory regions.
Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add some basic documentation (zh_CN version) for LoongArch. LoongArch is
a new RISC ISA, which is a bit like MIPS or RISC-V. LoongArch includes a
reduced 32-bit version (LA32R), a standard 32-bit version (LA32S) and a
64-bit version (LA64).
Reviewed-by: Alex Shi <alexs@kernel.org> Reviewed-by: Yanteng Si <siyanteng@loongson.cn> Reviewed-by: Guo Ren <guoren@kernel.org> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add some basic documentation for LoongArch. LoongArch is a new RISC ISA,
which is a bit like MIPS or RISC-V. LoongArch includes a reduced 32-bit
version (LA32R), a standard 32-bit version (LA32S) and a 64-bit version
(LA64).
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Co-developed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Tue, 31 May 2022 10:04:10 +0000 (18:04 +0800)]
irqchip: Adjust Kconfig for Loongson
HTVEC will be shared by both MIPS-based and LoongArch-based Loongson
processors (not only Loongson-3), so we adjust its description. HTPIC is
only used by MIPS-based Loongson, so we add a MIPS dependency.
Acked-by: Marc Zyngier <maz@kernel.org> Reviewed-by: WANG Xuerui <git@xen0n.name> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Damien Le Moal [Fri, 3 Jun 2022 02:19:05 +0000 (11:19 +0900)]
block: Fix potential deadlock in blk_ia_range_sysfs_show()
When being read, a sysfs attribute is already protected against removal
with the kobject node active reference counter. As a result, in
blk_ia_range_sysfs_show(), there is no need to take the queue sysfs
lock when reading the value of a range attribute. Using the queue sysfs
lock in this function creates a potential deadlock situation with the
disk removal, something that a lockdep signals with a splat when the
device is removed:
Dave Airlie [Fri, 3 Jun 2022 01:35:46 +0000 (11:35 +1000)]
Merge tag 'drm/tegra/for-5.19-prep-work' of https://gitlab.freedesktop.org/drm/tegra into drm-next
drm/tegra: Preparatory work for v5.19
This contains a single patch from a series that's ready to go for v5.10
but is also a shared build-time dependency for an IOMMU series that is
planned for v5.20. The idea is to take this into v5.19 to fulfill that
dependency and remove the need for close coordination for the two
series.
Dave Airlie [Fri, 3 Jun 2022 01:19:11 +0000 (11:19 +1000)]
Merge tag 'msm-next-5.19-fixes-06-01' of https://gitlab.freedesktop.org/abhinavk/msm into drm-next
5.19 fixes for msm-next
- Fix to add minimum ICC vote in the msm_mdss pm_resume path to address
bootup splats
- Fix to avoid dereferencing without checking in WB encoder
- Fix to avoid crash during suspend in DP driver by ensuring interrupt
mask bits are updated
- Remove unused code from dpu_encoder_virt_atomic_check()
- Fix to remove redundant init of dsc variable
riscv: Move alternative length validation into subsection
After commit ffd5e501a635 ("riscv: prevent compressed instructions in
alternatives"), builds with LLVM's integrated assembler fail:
In file included from arch/riscv/mm/init.c:10:
In file included from ./include/linux/mm.h:29:
In file included from ./include/linux/pgtable.h:6:
In file included from ./arch/riscv/include/asm/pgtable.h:108:
./arch/riscv/include/asm/tlbflush.h:23:2: error: expected assembly-time absolute expression
ALT_FLUSH_TLB_PAGE(__asm__ __volatile__ ("sfence.vma %0" : : "r" (addr) : "memory"));
^
./arch/riscv/include/asm/errata_list.h:33:5: note: expanded from macro 'ALT_FLUSH_TLB_PAGE'
asm(ALTERNATIVE("sfence.vma %0", "sfence.vma", SIFIVE_VENDOR_ID, \
^
./arch/riscv/include/asm/alternative-macros.h:187:2: note: expanded from macro 'ALTERNATIVE'
_ALTERNATIVE_CFG(old_content, new_content, vendor_id, errata_id, CONFIG_k)
^
./arch/riscv/include/asm/alternative-macros.h:113:2: note: expanded from macro '_ALTERNATIVE_CFG'
__ALTERNATIVE_CFG(old_c, new_c, vendor_id, errata_id, IS_ENABLED(CONFIG_k))
^
./arch/riscv/include/asm/alternative-macros.h:110:2: note: expanded from macro '__ALTERNATIVE_CFG'
ALT_NEW_CONTENT(vendor_id, errata_id, enable, new_c)
^
./arch/riscv/include/asm/alternative-macros.h:99:3: note: expanded from macro 'ALT_NEW_CONTENT'
".org . - (889b - 888b) + (887b - 886b)\n" \
^
<inline asm>:26:6: note: instantiated into assembly here
.org . - (889b - 888b) + (887b - 886b)
^
This error happens because LLVM's integrated assembler has a one-pass
design, which means it cannot figure out the instruction lengths when
the .org directive is outside of the subsection that contains the
instructions, which was changed by the .option directives added by the
above change.
Move the .org directives before the .previous directive so that these
directives are always within the same subsection, which resolves the
failures and does not introduce any new issues with GNU as. This was
done for arm64 in commit 4bf14e31bafd ("arm64/alternatives: move length
validation inside the subsection") and commit 95d14243743d ("arm64:
alternatives: Move length validation in alternative_{insn, endif}").
While there is no error from the assembly versions of the macro, they
appear to have the same problem so just make the same change there as
well so that there are no problems in the future.
Linus Torvalds [Thu, 2 Jun 2022 22:36:06 +0000 (15:36 -0700)]
Merge tag 'docs-5.19-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of late-arriving documentation fixes and the addition of an
SVG tux logo which, I'm assured, we're going to want"
* tag 'docs-5.19-2' of git://git.lwn.net/linux:
documentation: Format button_dev as a pointer.
docs: add SVG version of the Linux logo
docs: move Linux logo into a new `images` folder
docs: blockdev: change title to match section content
docs/conf.py: Cope with removal of language=None in Sphinx 5.0.0
Linus Torvalds [Thu, 2 Jun 2022 22:32:26 +0000 (15:32 -0700)]
Merge tag 'asm-generic-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"The header cleanup series from Masahiro Yamada ended up causing some
regressions in the ABI because of an ambigous uid_t type.
This was only caught after the original patches got merged, but at
least the fixes are trivial and hopefully complete"
* tag 'asm-generic-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
binder: fix sender_euid type in uapi header
sparc: fix mis-use of __kernel_{uid,gid}_t in uapi/asm/stat.h
powerpc: use __kernel_{uid,gid}32_t in uapi/asm/stat.h
mips: use __kernel_{uid,gid}32_t in uapi/asm/stat.h
Linus Torvalds [Thu, 2 Jun 2022 22:27:44 +0000 (15:27 -0700)]
Merge tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"This is the second part of the general SoC updates, containing
everything that did not make it in the initial pull request, or that
came in as a bugfix later.
- Devicetree updates for SoCFPGA, ASPEED, AT91 and Rockchip,
including a new machine using an ASPEED BMC.
- More DT fixes from Krzysztof Kozlowski across platforms
- A new SoC platform for the GXP baseboard management controller,
used in current server products from HPE"
* tag 'arm-late-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (56 commits)
ARM: configs: Enable more audio support for i.MX
tee: optee: Pass a pointer to virt_addr_valid()
arm64: dts: rockchip: rename Quartz64-A bluetooth gpios
arm64: dts: rockchip: add clocks property to cru node rk3368
arm64: dts: rockchip: add clocks property to cru node rk3308
arm64: dts: rockchip: add clocks to rk356x cru
ARM: dts: rockchip: add clocks property to cru node rk3228
ARM: dts: rockchip: add clocks property to cru node rk3036
ARM: dts: rockchip: add clocks property to cru node rk3066a/rk3188
ARM: dts: rockchip: add clocks property to cru node rk3288
ARM: dts: rockchip: Remove "amba" bus nodes from rv1108
ARM: dts: rockchip: add clocks property to cru node rv1108
arm64: dts: sprd: use new 'dma-channels' property
ARM: dts: da850: use new 'dma-channels' property
ARM: dts: pxa: use new 'dma-channels/requests' properties
soc: ixp4xx/qmgr: Fix unused match warning
ARM: ep93xx: Make ts72xx_register_flash() static
ARM: configs: enable support for Kontron KSwitch D10
ep93xx: clock: Do not return the address of the freed memory
arm64: dts: intel: add device tree for n6000
...
Linus Torvalds [Thu, 2 Jun 2022 22:23:54 +0000 (15:23 -0700)]
Merge tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM multiplatform updates from Arnd Bergmann:
"The second part of the multiplatform changes now converts the
Intel/Marvell PXA platform along with the rest. The patches went
through several rebases before the merge window as bugs were found, so
they remained separate.
This has to touch a lot of drivers, in particular the touchscreen,
pcmcia, sound and clk bits, to detach the driver files from the
platform and board specific header files"
* tag 'arm-multiplatform-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (48 commits)
ARM: pxa/mmp: remove traces of plat-pxa
ARM: pxa: convert to multiplatform
ARM: pxa/sa1100: move I/O space to PCI_IOBASE
ARM: pxa: remove support for MTD_XIP
ARM: pxa: move mach/*.h to mach-pxa/
ARM: PXA: fix multi-cpu build of xsc3
ARM: pxa: move plat-pxa to drivers/soc/
ARM: mmp: rename pxa_register_device
ARM: mmp: remove tavorevb board support
ARM: pxa: remove unused mach/bitfield.h
ARM: pxa: move clk register definitions to driver
ARM: pxa: move smemc register access from clk to platform
cpufreq: pxa3: move clk register access to clk driver
ARM: pxa: remove get_clk_frequency_khz()
ARM: pxa: pcmcia: move smemc configuration back to arch
ASoC: pxa: i2s: use normal MMIO accessors
ASoC: pxa: ac97: use normal MMIO accessors
ASoC: pxa: use pdev resource for FIFO regs
Input: wm97xx - get rid of irq_enable method in wm97xx_mach_ops
Input: wm97xx - switch to using threaded IRQ
...
Jisheng Zhang [Mon, 16 May 2022 14:32:04 +0000 (22:32 +0800)]
riscv: mm: init: make pt_ops_set_[early|late|fixmap] static
These three functions are only used in init.c, so make them static.
Fix W=1 warnings like below:
arch/riscv/mm/init.c:721:13: warning: no previous prototype for function
'pt_ops_set_early' [-Wmissing-prototypes]
void __init pt_ops_set_early(void)
^
- Revert "net: af_key: add check for pfkey_broadcast in function
pfkey_process"
- tcp: fix tcp_mtup_probe_success vs wrong snd_cwnd
- nf_tables: disallow non-stateful expression in sets earlier
- nft_limit: clone packet limits' cost value
- nf_tables: double hook unregistration in netns path
- ping6: fix ping -6 with interface name
Previous releases - always broken:
- sched: fix memory barriers to prevent skbs from getting stuck in
lockless qdiscs
- neigh: set lower cap for neigh_managed_work rearming, avoid
constantly scheduling the probe work
- bpf: fix probe read error on big endian in ___bpf_prog_run()
- amt: memory leak and error handling fixes
Misc:
- ipv6: expand & rename accept_unsolicited_na to accept_untracked_na"
* tag 'net-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
net/af_packet: make sure to pull mac header
net: add debug info to __skb_pull()
net: CONFIG_DEBUG_NET depends on CONFIG_NET
stmmac: intel: Add RPL-P PCI ID
net: stmmac: use dev_err_probe() for reporting mdio bus registration failure
tipc: check attribute length for bearer name
ice: fix access-beyond-end in the switch code
nfp: remove padding in nfp_nfdk_tx_desc
ax25: Fix ax25 session cleanup problems
net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline
sfc/siena: fix wrong tx channel offset with efx_separate_tx_channels
sfc/siena: fix considering that all channels have TX queues
socket: Don't use u8 type in uapi socket.h
net/sched: act_api: fix error code in tcf_ct_flow_table_fill_tuple_ipv6()
net: ping6: Fix ping -6 with interface name
macsec: fix UAF bug for real_dev
octeontx2-af: fix error code in is_valid_offset()
wifi: mac80211: fix use-after-free in chanctx code
bonding: guard ns_targets by CONFIG_IPV6
tcp: tcp_rtx_synack() can be called from process context
...
Saravana Kannan [Thu, 2 Jun 2022 03:56:52 +0000 (20:56 -0700)]
module: Fix prefix for module.sig_enforce module param
Commit 13c100fcaa1c ("module: Move all into module/") changed the prefix
of the module param by moving/renaming files. A later commit also moves
the module_param() into a different file, thereby changing the prefix
yet again.
This would break kernel cmdline compatibility and also userspace
compatibility at /sys/module/module/parameters/sig_enforce.
So, set the prefix back to "module.".
Fixes: 13c100fcaa1c ("module: Move all into module/") Link: https://lore.kernel.org/lkml/20220602034111.4163292-1-saravanak@google.com/ Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Aaron Tomlin <atomlin@redhat.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cristian Marussi [Tue, 24 May 2022 10:31:49 +0000 (11:31 +0100)]
kselftest/arm64: signal: Skip SVE signal test if not enough VLs supported
On platform where SVE is supported but there are less than 2 VLs available
the signal SVE change test should be skipped instead of failing.
Reported-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220524103149.2802-1-cristian.marussi@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stephen Boyd [Thu, 2 Jun 2022 02:21:09 +0000 (19:21 -0700)]
arm64: Initialize jump labels before setup_machine_fdt()
A static key warning splat appears during early boot on arm64 systems
that credit randomness from devicetrees that contain an "rng-seed"
property. This is because setup_machine_fdt() is called before
jump_label_init() during setup_arch(). Let's swap the order of these two
calls so that jump labels are initialized before the devicetree is
unflattened and the rng seed is credited.
Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Fixes: 8f20d58ba28b ("random: use static branch for crng_ready()") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20220602022109.780348-1-swboyd@chromium.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Linus Torvalds [Thu, 2 Jun 2022 19:11:25 +0000 (12:11 -0700)]
Merge tag 'pci-v5.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fixes from Bjorn Helgaas:
- Revert brcmstb patches that broke booting on Raspberry Pi Compute
Module 4 (Bjorn Helgaas)
- Fix bridge_d3_blacklist[] error that overwrote the existing Gigabyte
X299 entry instead of adding a new one (Bjorn Helgaas)
- Update Lorenzo Pieralisi's email address in MAINTAINERS (Lorenzo
Pieralisi)
* tag 'pci-v5.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Update Lorenzo Pieralisi's email address
PCI/PM: Fix bridge_d3_blacklist[] Elo i2 overwrite of Gigabyte X299
Revert "PCI: brcmstb: Split brcm_pcie_setup() into two funcs"
Revert "PCI: brcmstb: Add mechanism to turn on subdev regulators"
Revert "PCI: brcmstb: Add control of subdevice voltage regulators"
Revert "PCI: brcmstb: Do not turn off WOL regulators on suspend"
Fixes: e0133f99cf15 ("net/af_packet: add VLAN support for AF_PACKET SOCK_RAW GSO") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net: stmmac: use dev_err_probe() for reporting mdio bus registration failure
I have a board where these two lines are always printed during boot:
imx-dwmac 30bf0000.ethernet: Cannot register the MDIO bus
imx-dwmac 30bf0000.ethernet: stmmac_dvr_probe: MDIO bus (id: 1) registration failed
It's perfectly fine, and the device is successfully (and silently, as
far as the console goes) probed later.
Use dev_err_probe() instead, which will demote these messages to debug
level (thus removing the alarming messages from the console) when the
error is -EPROBE_DEFER, and also has the advantage of including the
error code if/when it happens to be something other than -EPROBE_DEFER.
While here, add the missing \n to one of the format strings.
Linus Torvalds [Thu, 2 Jun 2022 15:59:39 +0000 (08:59 -0700)]
Merge tag 'ceph-for-5.19-rc1' of https://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"A big pile of assorted fixes and improvements for the filesystem with
nothing in particular standing out, except perhaps that the fact that
the MDS never really maintained atime was made official and thus it's
no longer updated on the client either.
We also have a MAINTAINERS update: Jeff is transitioning his
filesystem maintainership duties to Xiubo"
* tag 'ceph-for-5.19-rc1' of https://github.com/ceph/ceph-client: (23 commits)
MAINTAINERS: move myself from ceph "Maintainer" to "Reviewer"
ceph: fix decoding of client session messages flags
ceph: switch TASK_INTERRUPTIBLE to TASK_KILLABLE
ceph: remove redundant variable ino
ceph: try to queue a writeback if revoking fails
ceph: fix statfs for subdir mounts
ceph: fix possible deadlock when holding Fwb to get inline_data
ceph: redirty the page for writepage on failure
ceph: try to choose the auth MDS if possible for getattr
ceph: disable updating the atime since cephfs won't maintain it
ceph: flush the mdlog for filesystem sync
ceph: rename unsafe_request_wait()
libceph: use swap() macro instead of taking tmp variable
ceph: fix statx AT_STATX_DONT_SYNC vs AT_STATX_FORCE_SYNC check
ceph: no need to invalidate the fscache twice
ceph: replace usage of found with dedicated list iterator variable
ceph: use dedicated list iterator variable
ceph: update the dlease for the hashed dentry when removing
ceph: stop retrying the request when exceeding 256 times
ceph: stop forwarding the request when exceeding 256 times
...
Linus Torvalds [Thu, 2 Jun 2022 15:55:01 +0000 (08:55 -0700)]
Merge tag 'livepatching-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching cleanup from Petr Mladek:
- Remove duplicated livepatch code [Christophe]
* tag 'livepatching-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Remove klp_arch_set_pc() and asm/livepatch.h
Carlos Llamas [Wed, 1 Jun 2022 01:00:17 +0000 (01:00 +0000)]
binder: fix sender_euid type in uapi header
The {pid,uid}_t fields of struct binder_transaction were recently
replaced to use kernel types in commit d7f56adb0d49 ("android/binder.h:
add linux/android/binder(fs).h to UAPI compile-test coverage").
However, using __kernel_uid_t here breaks backwards compatibility in
architectures using 16-bits for this type, since glibc and some others
still expect a 32-bit uid_t. Instead, let's use __kernel_uid32_t which
avoids this compatibility problem.
Fixes: d7f56adb0d49 ("android/binder.h: add linux/android/binder(fs).h to UAPI compile-test coverage") Reported-by: Christopher Ferris <cferris@google.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Acked-by: Todd Kjos <tkjos@google.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Linus Torvalds [Thu, 2 Jun 2022 15:46:30 +0000 (08:46 -0700)]
Merge tag 'memblock-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock test suite updates from Mike Rapoport:
"Comment updates for memblock test suite
Update comments in the memblock tests so that they will have
consistent style"
* tag 'memblock-v5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: remove completed TODO item
memblock tests: update style of comments for memblock_free_*() functions
memblock tests: update style of comments for memblock_remove_*() functions
memblock tests: update style of comments for memblock_reserve_*() functions
memblock tests: update style of comments for memblock_add_*() functions
Dan Carpenter [Thu, 2 Jun 2022 11:02:18 +0000 (14:02 +0300)]
i2c: ismt: prevent memory corruption in ismt_access()
The "data->block[0]" variable comes from the user and is a number
between 0-255. It needs to be capped to prevent writing beyond the end
of dma_buffer[].
Fixes: 3fa315911c01 ("i2c: ismt: Adding support for I2C_SMBUS_BLOCK_PROC_CALL") Reported-and-tested-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masahiro Yamada [Wed, 1 Jun 2022 18:19:40 +0000 (03:19 +0900)]
powerpc: use __kernel_{uid,gid}32_t in uapi/asm/stat.h
Commit 0b6c56d4c7a6 ("powerpc: add asm/stat.h to UAPI compile-test
coverage") converted as follows:
uid_t --> __kernel_uid_t
gid_t --> __kernel_gid_t
The bit width of __kernel_{uid,gid}_t is 16 or 32-bits depending on
architectures.
PPC uses 32-bits for them as in include/uapi/asm-generic/posix_types.h,
so the previous conversion is probably fine, but let's stick to the
arch-independent conversion just in case.
The safe replacements across all architectures are:
Masahiro Yamada [Wed, 1 Jun 2022 18:19:39 +0000 (03:19 +0900)]
mips: use __kernel_{uid,gid}32_t in uapi/asm/stat.h
Commit 8a2fce5b2795 ("mips: add asm/stat.h to UAPI compile-test
coverage") converted as follows:
uid_t --> __kernel_uid_t
gid_t --> __kernel_gid_t
The bit width of __kernel_{uid,gid}_t is 16 or 32-bits depending on
architectures.
MIPS uses 32-bits for them as in include/uapi/asm-generic/posix_types.h,
so the previous conversion is probably fine, but let's stick to the
arch-independent conversion just in case.
The safe replacements across all architectures are:
Damien Le Moal [Thu, 2 Jun 2022 12:03:44 +0000 (21:03 +0900)]
block: null_blk: Fix null_zone_write()
The bio and rq fields of struct nullb_cmd are now overlapping in a
union. So we cannot use a test on ->bio being non-NULL to detect the
NULL_Q_BIO queue mode. null_zone_write() use such broken test to set the
sector position of a zone append write in the command bio or request.
When the null_blk device uses the NULL_Q_MQ queue mode,
null_zone_write() wrongly end up setting the bio sector position,
resulting in the command request to be broken and random crashes
following.
Fix this by testing the device queue mode directly.
Fixes: dd65a191c047 ("null-blk: save memory footprint for struct nullb_cmd") Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20220602120344.1365329-1-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Catalin Marinas [Wed, 1 Jun 2022 17:13:38 +0000 (18:13 +0100)]
arm64: Remove the __user annotation for the restore_za_context() argument
The struct user_ctx *user pointer passed to restore_za_context() is not
a user point but a structure containing several __user pointers. Remove
the __user annotation.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Fixes: f723cd5fcf09 ("arm64/sme: Implement ZA signal handling") Reported-by: kernel test robot <lkp@intel.com> Cc: Mark Brown <broonie@kernel.org> Reviewed-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220601171338.2143625-1-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Global `-Warray-bounds` enablement revealed some problems, one of
which is the way we define and use AQC rules messages.
In fact, they have a shared header, followed by the actual message,
which can be of one of several different formats. So it is
straightforward enough to define that header as a separate struct
and then embed it into message structures as needed, but currently
all the formats reside in one union coupled with the header. Then,
the code allocates only the memory needed for a particular message
format, leaving the union potentially incomplete.
There are no actual reads or writes beyond the end of an allocated
chunk, but at the same time, the whole implementation is fragile and
backed by an equilibrium rather than strong type and memory checks.
Define the structures the other way around: one for the common
header and the rest for the actual formats with the header embedded.
There are no places where several union members would be used at the
same time anyway. This allows to use proper struct_size() and let
the compiler know what is going to be done.
Finally, unsilence `-Warray-bounds` back for ice_switch.c.
Other little things worth mentioning:
* &ice_sw_rule_vsi_list_query is not used anywhere, remove it. It's
weird anyway to talk to hardware with purely kernel types
(bitmaps);
* expand the ICE_SW_RULE_*_SIZE() macros to pass a structure
variable name to struct_size() to let it do strict typechecking;
* rename ice_sw_rule_lkup_rx_tx::hdr to ::hdr_data to keep ::hdr
for the header structure to have the same name for it constistenly
everywhere;
* drop the duplicate of %ICE_SW_RULE_RX_TX_NO_HDR_SIZE residing in
ice_switch.h.
Fixes: 82c554ac97bf ("ice: Add support for switch filter programming") Fixes: 06bf9186a43b ("ice: replace single-element array used for C struct hack") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Acked-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220601105924.2841410-1-alexandr.lobakin@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fei Qin [Wed, 1 Jun 2022 08:34:49 +0000 (10:34 +0200)]
nfp: remove padding in nfp_nfdk_tx_desc
NFDK firmware supports 48-bit dma addressing and
parses 16 high bits of dma addresses.
In nfp_nfdk_tx_desc, dma related structure and tso
related structure are union. When "mss" be filled
with nonzero value due to enable tso, the memory used
by "padding" may be also filled. Then, firmware may
parse wrong dma addresses which causes TX watchdog
timeout problem.
This patch removes padding and unifies the dma_addr_hi
bits with the one in firmware. nfp_nfdk_tx_desc_set_dma_addr
is also added to match this change.
Fixes: 2c359c6702e5 ("nfp: add support for NFDK data path") Signed-off-by: Fei Qin <fei.qin@corigine.com> Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220601083449.50556-1-simon.horman@corigine.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Duoming Zhou [Mon, 30 May 2022 15:21:58 +0000 (23:21 +0800)]
ax25: Fix ax25 session cleanup problems
There are session cleanup problems in ax25_release() and
ax25_disconnect(). If we setup a session and then disconnect,
the disconnected session is still in "LISTENING" state that
is shown below.
Active AX.25 sockets
Dest Source Device State Vr/Vs Send-Q Recv-Q
DL9SAU-4 DL9SAU-3 ??? LISTENING 000/000 0 0
DL9SAU-3 DL9SAU-4 ??? LISTENING 000/000 0 0
The first reason is caused by del_timer_sync() in ax25_release().
The timers of ax25 are used for correct session cleanup. If we use
ax25_release() to close ax25 sessions and ax25_dev is not null,
the del_timer_sync() functions in ax25_release() will execute.
As a result, the sessions could not be cleaned up correctly,
because the timers have stopped.
In order to solve this problem, this patch adds a device_up flag
in ax25_dev in order to judge whether the device is up. If there
are sessions to be cleaned up, the del_timer_sync() in
ax25_release() will not execute. What's more, we add ax25_cb_del()
in ax25_kill_by_device(), because the timers have been stopped
and there are no functions that could delete ax25_cb if we do not
call ax25_release(). Finally, we reorder the position of
ax25_list_lock in ax25_cb_del() in order to synchronize among
different functions that call ax25_cb_del().
The second reason is caused by improper check in ax25_disconnect().
The incoming ax25 sessions which ax25->sk is null will close
heartbeat timer, because the check "if(!ax25->sk || ..)" is
satisfied. As a result, the session could not be cleaned up properly.
In order to solve this problem, this patch changes the improper
check to "if(ax25->sk && ..)" in ax25_disconnect().
What`s more, the ax25_disconnect() may be called twice, which is
not necessary. For example, ax25_kill_by_device() calls
ax25_disconnect() and sets ax25->state to AX25_STATE_0, but
ax25_release() calls ax25_disconnect() again.
In order to solve this problem, this patch add a check in
ax25_release(). If the flag of ax25->sk equals to SOCK_DEAD,
the ax25_disconnect() in ax25_release() should not be executed.
Fixes: 436f7cf8995f ("ax25: Fix UAF bugs in ax25 timers") Fixes: 5b4710ff3f23 ("ax25: Fix segfault after sock connection timeout") Reported-and-tested-by: Thomas Osterried <thomas@osterried.de> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220530152158.108619-1-duoming@zju.edu.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jan Kara [Thu, 2 Jun 2022 08:12:42 +0000 (10:12 +0200)]
block: fix bio_clone_blkg_association() to associate with proper blkcg_gq
Commit 6092cda078f8 ("block: really clone the block cgroup in
bio_clone_blkg_association") changed bio_clone_blkg_association() to
just clone bio->bi_blkg reference from source to destination bio. This
is however wrong if the source and destination bios are against
different block devices because struct blkcg_gq is different for each
bdev-blkcg pair. This will result in IOs being accounted (and throttled
as a result) multiple times against the same device (src bdev) while
throttling of the other device (dst bdev) is ignored. In case of BFQ the
inconsistency can even result in crashes in bfq_bic_update_cgroup().
Fix the problem by looking up correct blkcg_gq for the cloned bio.
Reported-by: Logan Gunthorpe <logang@deltatee.com> Reported-and-tested-by: Donald Buczek <buczek@molgen.mpg.de> Fixes: 6092cda078f8 ("block: really clone the block cgroup in bio_clone_blkg_association") CC: stable@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220602081242.7731-1-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
Damien Le Moal [Thu, 2 Jun 2022 07:51:59 +0000 (16:51 +0900)]
block: remove useless BUG_ON() in blk_mq_put_tag()
Since the if condition in blk_mq_put_tag() checks that the tag to put is
not a reserved one, the BUG_ON() check in the else branch checking if
the tag is indeed a reserved one is useless. Remove it.
Jens Axboe [Thu, 2 Jun 2022 07:48:35 +0000 (01:48 -0600)]
Merge tag 'nvme-5.19-2022-06-02' of git://git.infradead.org/nvme into for-5.19/drivers
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.19
- set controller enable bit in a separate write (Niklas Cassel)
- disable namespace identifiers for the MAXIO MAP1001 (me)
- fix a comment typo (Julia Lawall)"
* tag 'nvme-5.19-2022-06-02' of git://git.infradead.org/nvme:
nvmet: fix typo in comment
nvme: set controller enable bit in a separate write
nvme-pci: disable namespace identifiers for the MAXIO MAP1001
Jens Axboe [Thu, 2 Jun 2022 05:57:02 +0000 (23:57 -0600)]
io_uring: reinstate the inflight tracking
After some debugging, it was realized that we really do still need the
old inflight tracking for any file type that has io_uring_fops assigned.
If we don't, then trivial circular references will mean that we never get
the ctx cleaned up and hence it'll leak.
Just bring back the inflight tracking, which then also means we can
eliminate the conditional dropping of the file when task_work is queued.
Fixes: 26da70d7ddb8 ("io_uring: drop the old style inflight file tracking") Signed-off-by: Jens Axboe <axboe@kernel.dk>
Xianting Tian [Wed, 18 May 2022 01:34:28 +0000 (09:34 +0800)]
RISC-V: Mark IORESOURCE_EXCLUSIVE for reserved mem instead of IORESOURCE_BUSY
Commit 545c1cf7974b ("RISC-V: Add kernel image sections to the resource tree")
marked IORESOURCE_BUSY for reserved memory, which caused resource map
failed in subsequent operations of related driver, so remove the
IORESOURCE_BUSY flag. In order to prohibit userland mapping reserved
memory, mark IORESOURCE_EXCLUSIVE for it.
The code to reproduce the issue,
dts:
mem0: memory@a0000000 {
reg = <0x0 0xa0000000 0 0x1000000>;
no-map;
};
&test {
status = "okay";
memory-region = <&mem0>;
};
code:
np = of_parse_phandle(pdev->dev.of_node, "memory-region", 0);
ret = of_address_to_resource(np, 0, &r);
base = devm_ioremap_resource(&pdev->dev, &r);
// base = -EBUSY
Tobias Klauser [Thu, 5 May 2022 08:18:15 +0000 (10:18 +0200)]
riscv: Wire up memfd_secret in UAPI header
Move the __ARCH_WANT_MEMFD_SECRET define added in commit 3d8293a004df
("arch, mm: wire up memfd_secret system call where relevant") to
<uapi/asm/unistd.h> so __NR_memfd_secret is defined when including
<unistd.h> in userspace.
This allows the memfd_secret selftest to pass on riscv.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Link: https://lore.kernel.org/r/20220505081815.22808-1-tklauser@distanz.ch Fixes: 3d8293a004df ("arch, mm: wire up memfd_secret system call where relevant") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Samuel Holland [Sat, 30 Apr 2022 03:00:23 +0000 (22:00 -0500)]
riscv: Fix irq_work when SMP is disabled
irq_work is triggered via an IPI, but the IPI infrastructure is not
included in uniprocessor kernels. As a result, irq_work never runs.
Fall back to the tick-based irq_work implementation on uniprocessor
configurations.
Fixes: e386de31464a ("riscv: Support irq_work via self IPIs") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20220430030025.58405-1-samuel@sholland.org Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Alexandre Ghiti [Mon, 6 Dec 2021 10:46:54 +0000 (11:46 +0100)]
riscv: Improve virtual kernel memory layout dump
With the arrival of sv48 and its large address space, it would be
cumbersome to statically define the unit size to use to print the different
portions of the virtual memory layout: instead, determine it dynamically.
Alexandre Ghiti [Mon, 6 Dec 2021 10:46:56 +0000 (11:46 +0100)]
riscv: Initialize thread pointer before calling C functions
Because of the stack canary feature that reads from the current task
structure the stack canary value, the thread pointer register "tp" must
be set before calling any C function from head.S: by chance, setup_vm
and all the functions that it calls does not seem to be part of the
functions where the canary check is done, but in the following commits,
some functions will.
RISC-V: Only default to spinwait on SBI-0.1 and M-mode
The spinwait boot method has been superseded by the SBI HSM extension
for some time now, but it still enabled by default. This causes some
issues on large hart count systems, which will hang if a physical hart
exists that is larger than NR_CPUS.
Users on modern SBI implementation don't need spinwait, and while it's
probably possible to deal with some of the spinwait issues let's just
restrict the default to systems that are likely to actually use it.
At slot 0, an internal node with 2 leaves could not be folded into the
node, because there was only one available slot (slot 0). Thus, the
internal node was retained. At slot 1, the node had one leaf, and was
able to be folded in successfully. The remaining nodes had no leaves,
and so were removed. By the end of the compression stage, there were 14
free slots, and only 3 leaf nodes. The tree was ascended and then its
parent node was compressed. When this node was seen, it could not be
folded, due to the internal node it contained.
The invariant for compression in this function is: whenever
nr_leaves_on_branch < ASSOC_ARRAY_FAN_OUT, the node should contain all
leaf nodes. The compression step currently cannot guarantee this, given
the corner case shown above.
To fix this issue, retry compression whenever we have retained a node,
and yet nr_leaves_on_branch < ASSOC_ARRAY_FAN_OUT. This second
compression will then allow the node in slot 1 to be folded in,
satisfying the invariant. Below is the output of the reproducer once the
fix is applied:
Slark Xiao [Wed, 1 Jun 2022 04:05:31 +0000 (12:05 +0800)]
net: usb: qmi_wwan: Add support for Cinterion MV31 with new baseline
Adding support for Cinterion device MV31 with Qualcomm
new baseline. Use different PIDs to separate it from
previous base line products.
All interfaces settings keep same as previous.
Jakub Kicinski [Thu, 2 Jun 2022 01:04:40 +0000 (18:04 -0700)]
Merge tag 'mlx5-fixes-2022-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-05-31
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
* tag 'mlx5-fixes-2022-05-31' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix mlx5_get_next_dev() peer device matching
net/mlx5e: Update netdev features after changing XDP state
net/mlx5: correct ECE offset in query qp output
net/mlx5e: Disable softirq in mlx5e_activate_rq to avoid race condition
net/mlx5: CT: Fix header-rewrite re-use for tupels
net/mlx5e: TC NIC mode, fix tc chains miss table
net/mlx5: Don't use already freed action pointer
====================
====================
sfc/siena: fix some efx_separate_tx_channels errors
Trying to load sfc driver with modparam efx_separate_tx_channels=1
resulted in errors during initialization and not being able to use the
NIC. This patches fix a few bugs and make it work again.
This has been already done for sfc, do it also for sfc_siena.
====================
projects / kernel.git / log