Merge tag 'x86_urgent_for_v5.19_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
"A couple more retbleed fallout fixes.
It looks like their urgency is decreasing so it seems like we've
managed to catch whatever snafus the limited -rc testing has exposed.
Maybe we're getting ready... :)
- Make retbleed mitigations 64-bit only (32-bit will need a bit more
work if even needed, at all).
- Prevent return thunks patching of the LKDTM modules as it is not
needed there
- Avoid writing the SPEC_CTRL MSR on every kernel entry on eIBRS
parts
- Enhance error output of apply_returns() when it fails to patch a
return thunk
- A sparse fix to the sev-guest module
- Protect EFI fw calls by issuing an IBPB on AMD"
* tag 'x86_urgent_for_v5.19_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Make all RETbleed mitigations 64-bit only
lkdtm: Disable return thunks in rodata.c
x86/bugs: Warn when "ibrs" mitigation is selected on Enhanced IBRS parts
x86/alternative: Report missing return thunk details
virt: sev-guest: Pass the appropriate argument type to iounmap()
x86/amd: Use IBPB for firmware calls
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Check for invalid flags to KVM_CAP_X86_USER_SPACE_MSR
- Fix use of sched_setaffinity in selftests
- Sync kernel headers to tools
- Fix KVM_STATS_UNIT_MAX
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Protect the unused bits in MSR exiting flags
tools headers UAPI: Sync linux/kvm.h with the kernel sources
KVM: selftests: Fix target thread to be migrated in rseq_test
KVM: stats: Fix value for KVM_STATS_UNIT_MAX for boolean stats
Ben Hutchings [Sat, 23 Jul 2022 15:22:47 +0000 (17:22 +0200)]
x86/speculation: Make all RETbleed mitigations 64-bit only
The mitigations for RETBleed are currently ineffective on x86_32 since
entry_32.S does not use the required macros. However, for an x86_32
target, the kconfig symbols for them are still enabled by default and
/sys/devices/system/cpu/vulnerabilities/retbleed will wrongly report
that mitigations are in place.
Make all of these symbols depend on X86_64, and only enable RETHUNK by
default on X86_64.
Fixes: 3b1385b85104 ("x86/retbleed: Add fine grained Kconfig knobs") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/YtwSR3NNsWp1ohfV@decadent.org.uk
Merge tag 'spi-fix-v5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few more small driver specific fixes"
* tag 'spi-fix-v5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-rspi: Fix PIO fallback on RZ platforms
spi: spi-cadence: Fix SPI NO Slave Select macro definition
spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers
Merge tag 'riscv-for-linus-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- Two kexec-related build fixes
- A DTS update to make the GPIO nodes match the upcoming dtschema
- A fix that passes -mno-relax directly to the assembler when building
modules, to work around compilers that fail to do so
* tag 'riscv-for-linus-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: add as-options for modules with assembly compontents
riscv: dts: align gpio-key node names with dtschema
RISC-V: kexec: Fix build error without CONFIG_KEXEC
RISCV: kexec: Fix build error without CONFIG_MODULES
Merge tag 'acpi-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix yet another piece of ACPI CPPC changes fallout on AMD platforms
(Mario Limonciello)"
* tag 'acpi-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Don't require flexible address space if X86_FEATURE_CPPC is supported
Merge tag 'io_uring-5.19-2022-07-21' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Fix for a bad kfree() introduced in this cycle, and a quick fix for
disabling buffer recycling for IORING_OP_READV.
The latter will get reworked for 5.20, but it gets the job done for
5.19"
* tag 'io_uring-5.19-2022-07-21' of git://git.kernel.dk/linux-block:
io_uring: do not recycle buffer in READV
io_uring: fix free of unallocated buffer list
Merge tag 'i2c-for-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Two driver bugfixes and a typo fix"
* tag 'i2c-for-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: cadence: Change large transfer count reset logic to be unconditional
i2c: imx: fix typo in comment
i2c: mlxcpld: Fix register setting for 400KHz frequency
Merge tag 'gpio-fixes-for-v5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix several regmap usage issues in gpio-pca953x
- fix out-of-tree build for GPIO selftests
- fix integer overflow in gpio-xilinx
* tag 'gpio-fixes-for-v5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: gpio-xilinx: Fix integer overflow
selftests: gpio: fix include path to kernel headers for out of tree builds
gpio: pca953x: use the correct register address when regcache sync during init
gpio: pca953x: use the correct range when do regmap sync
gpio: pca953x: only use single read/write for No AI mode
Merge tag 'pinctrl-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Only driver fixes:
- NULL check for the ralink and sunplus drivers
- Add Jacky Bai as maintainer for the Freescale pin controllers
- Fix pin config ops for the Ocelot LAN966x and SparX5
- Disallow AMD pin control to be a module: the GPIO lines need to be
active in early boot, so no can do
- Fix the Armada 37xx to use raw spinlocks in the interrupt handler
path to avoid wait context"
* tag 'pinctrl-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: armada-37xx: use raw spinlocks for regmap to avoid invalid wait context
pinctrl: armada-37xx: make irq_lock a raw spinlock to avoid invalid wait context
pinctrl: Don't allow PINCTRL_AMD to be a module
pinctrl: ocelot: Fix pincfg
pinctrl: ocelot: Fix pincfg for lan966x
MAINTAINERS: Update freescale pin controllers maintainer
pinctrl: sunplus: Add check for kcalloc
pinctrl: ralink: Check for null return of devm_kcalloc
Merge tag 'sound-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Only undoes the Rockchip BCLK changes to address a regression"
* tag 'sound-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: rockchip-i2s: Undo BCLK pinctrl changes
ASoC: rockchip: i2s: Fix NULL pointer dereference when pinctrl is not found
Merge tag 'drm-fixes-2022-07-22' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Fixes for this week.
The main one is the i915 firmware fix for the phoronix reported issue.
I've written some firmware guidelines as a result, should land in
-next soon. Otherwise a few amdgpu fixes, a scheduler fix, ttm fix and
two other minor ones.
scheduler:
- scheduling while atomic fix
ttm:
- locking fix
edp:
- variable typo fix
i915:
- add back support for v69 firmware on ADL-P
amdgpu:
- Drop redundant buffer cleanup that can lead to a segfault
- Add a bo_list mutex to avoid possible list corruption in CS
- dmub notification fix
imx:
- fix error path"
* tag 'drm-fixes-2022-07-22' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu: Protect the amdgpu_bo_list list with a mutex v2
drm/imx/dcss: Add missing of_node_put() in fail path
drm/i915/guc: support v69 in parallel to v70
drm/i915/guc: Support programming the EU priority in the GuC descriptor
drm/panel-edp: Fix variable typo when saving hpd absent delay from DT
drm/amdgpu: Remove one duplicated ef removal
drm/ttm: fix locking in vmap/vunmap TTM GEM helpers
drm/scheduler: Don't kill jobs in interrupt context
drm/amd/display: Fix new dmub notification enabling in DM
Merge tag 'rcu-urgent.2022.07.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This contains a pair of commits that fix 203182ec86fb ("srcu: Prevent
expedited GPs and blocking readers from consuming CPU"), which was
itself a fix to an SRCU expedited grace-period problem that could
prevent kernel live patching (KLP) from completing.
That SRCU fix for KLP introduced large (as in minutes) boot-time
delays to embedded Linux kernels running on qemu/KVM. These delays
were due to the emulation of certain MMIO operations controlling
memory layout, which were emulated with one expedited grace period per
access. Common configurations required thousands of boot-time MMIO
accesses, and thus thousands of boot-time expedited SRCU grace
periods.
In these configurations, the occasional sleeps that allowed KLP to
proceed caused excessive boot delays. These commits preserve enough
sleeps to permit KLP to proceed, but few enough that the virtual
embedded kernels still boot reasonably quickly.
This represents a regression introduced in the v5.19 merge window, and
the bug is causing significant inconvenience"
* tag 'rcu-urgent.2022.07.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
srcu: Make expedited RCU grace periods block even less frequently
srcu: Block less aggressively for expedited grace periods
mmu_gather: fix the CONFIG_MMU_GATHER_NO_RANGE case
Sudip reports that alpha doesn't build properly, with errors like
include/asm-generic/tlb.h:401:1: error: redefinition of 'tlb_update_vma_flags'
401 | tlb_update_vma_flags(struct mmu_gather *tlb, struct vm_area_struct *vma)
| ^~~~~~~~~~~~~~~~~~~~
include/asm-generic/tlb.h:372:1: note: previous definition of 'tlb_update_vma_flags' with type 'void(struct mmu_gather *, struct vm_area_struct *)'
372 | tlb_update_vma_flags(struct mmu_gather *tlb, struct vm_area_struct *vma) { }
the cause being that We have this odd situation where some architectures
were never converted to the newer TLB flushing interfaces that have a
range for the flush. Instead people left them alone, and we have them
select the MMU_GATHER_NO_RANGE config option to make the tlb header
files account for this.
Peter Zijlstra cleaned some of these nasty header file games up in
commits
a31d3b946386 ("mmu_gather: Remove per arch tlb_{start,end}_vma()") 35167b29df34 ("mmu_gather: Let there be one tlb_{start,end}_vma() implementation")
but tlb_update_vma_flags() was left alone, and then commit ab18087539e8
("mmu_gather: Force tlb-flush VM_PFNMAP vmas") ended up removing only
_one_ of the two stale duplicate dummy inline functions.
This removes the other stale one.
Somebody braver than me should try to remove MMU_GATHER_NO_RANGE
entirely, but it requires fixing up the oddball architectures that use
it: alpha, m68k, microblaze, nios2 and openrisc.
The fixups should be fairly straightforward ("fix the build errors it
exposes by adding the appropriate range arguments"), but the reason this
wasn't done in the first place is that so few people end up working on
those architectures. But it could be done one architecture at a time,
hint, hint.
Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com> Fixes: ab18087539e8 ("mmu_gather: Force tlb-flush VM_PFNMAP vmas") Link: https://lore.kernel.org/all/YtpXh0QHWwaEWVAY@debian/ Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <npiggin@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ben Dooks [Sun, 29 May 2022 15:22:00 +0000 (16:22 +0100)]
riscv: add as-options for modules with assembly compontents
When trying to load modules built for RISC-V which include assembly files
the kernel loader errors with "unexpected relocation type 'R_RISCV_ALIGN'"
due to R_RISCV_ALIGN relocations being generated by the assembler.
The R_RISCV_ALIGN relocations can be removed at the expense of code space
by adding -mno-relax to gcc and as. In commit e7612f54d25ba96
("RISC-V: Fixes to module loading") -mno-relax is added to the build
variable KBUILD_CFLAGS_MODULE. See [1] for more info.
The issue is that when kbuild builds a .S file, it invokes gcc with
the -mno-relax flag, but this is not being passed through to the
assembler. Adding -Wa,-mno-relax to KBUILD_AFLAGS_MODULE ensures that
the assembler is invoked correctly. This may have now been fixed in
gcc[2] and this addition should not stop newer gcc and as from working.
* tag 'mtd/fixes-for-5.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: gpmi: Set WAIT_FOR_READY timeout based on program/erase times
- eth: iavf: fix handling of dummy receive descriptors
- eth: lan966x: fix issues with MAC table
- eth: stmmac: dwmac-mediatek: fix clock issue
Misc:
- dsa: update documentation"
* tag 'net-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
mlxsw: spectrum_router: Fix IPv4 nexthop gateway indication
net/sched: cls_api: Fix flow action initialization
tcp: Fix data-races around sysctl_tcp_max_reordering.
tcp: Fix a data-race around sysctl_tcp_abort_on_overflow.
tcp: Fix a data-race around sysctl_tcp_rfc1337.
tcp: Fix a data-race around sysctl_tcp_stdurg.
tcp: Fix a data-race around sysctl_tcp_retrans_collapse.
tcp: Fix data-races around sysctl_tcp_slow_start_after_idle.
tcp: Fix a data-race around sysctl_tcp_thin_linear_timeouts.
tcp: Fix data-races around sysctl_tcp_recovery.
tcp: Fix a data-race around sysctl_tcp_early_retrans.
tcp: Fix data-races around sysctl knobs related to SYN option.
udp: Fix a data-race around sysctl_udp_l3mdev_accept.
ip: Fix data-races around sysctl_ip_prot_sock.
ipv4: Fix data-races around sysctl_fib_multipath_hash_fields.
ipv4: Fix data-races around sysctl_fib_multipath_hash_policy.
ipv4: Fix a data-race around sysctl_fib_multipath_use_neigh.
can: rcar_canfd: Add missing of_node_put() in rcar_canfd_probe()
can: mcp251xfd: fix detection of mcp251863
Documentation: fix udp_wmem_min in ip-sysctl.rst
...
Peter Zijlstra [Fri, 8 Jul 2022 07:18:06 +0000 (09:18 +0200)]
mmu_gather: Force tlb-flush VM_PFNMAP vmas
Jann reported a race between munmap() and unmap_mapping_range(), where
unmap_mapping_range() will no-op once unmap_vmas() has unlinked the
VMA; however munmap() will not yet have invalidated the TLBs.
Therefore unmap_mapping_range() will complete while there are still
(stale) TLB entries for the specified range.
Mitigate this by force flushing TLBs for VM_PFNMAP ranges.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Fri, 8 Jul 2022 07:18:05 +0000 (09:18 +0200)]
mmu_gather: Let there be one tlb_{start,end}_vma() implementation
Now that architectures are no longer allowed to override
tlb_{start,end}_vma() re-arrange code so that there is only one
implementation for each of these functions.
This much simplifies trying to figure out what they actually do.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Zijlstra [Fri, 8 Jul 2022 07:18:03 +0000 (09:18 +0200)]
mmu_gather: Remove per arch tlb_{start,end}_vma()
Scattered across the archs are 3 basic forms of tlb_{start,end}_vma().
Provide two new MMU_GATHER_knobs to enumerate them and remove the per
arch tlb_{start,end}_vma() implementations.
- MMU_GATHER_NO_FLUSH_CACHE indicates the arch has flush_cache_range()
but does *NOT* want to call it for each VMA.
- MMU_GATHER_MERGE_VMAS indicates the arch wants to merge the
invalidate across multiple VMAs if possible.
With these it is possible to capture the three forms:
1) empty stubs;
select MMU_GATHER_NO_FLUSH_CACHE and MMU_GATHER_MERGE_VMAS
Obviously, if the architecture does not have flush_cache_range() then
it also doesn't need to select MMU_GATHER_NO_FLUSH_CACHE.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the command 'lx-symbols' in gdb exits with the error`Function
"do_init_module" not defined in "kernel/module.c"`. This occurs because
the file kernel/module.c was moved to kernel/module/main.c.
Fix this breakage by changing the path to "kernel/module/main.c" in
LoadModuleBreakpoint.
Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Fixes: 2c85ee92a950 ("module: Move all into module/") Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sedat Dilek noticed that I had an extraneous semicolon at the end of a
line in the previous patch.
It's harmless, but unintentional, and while compilers just treat it as
an extra empty statement, for all I know some other tooling might warn
about it. So clean it up before other people notice too ;)
Biju Das [Thu, 21 Jul 2022 14:34:49 +0000 (15:34 +0100)]
spi: spi-rspi: Fix PIO fallback on RZ platforms
RSPI IP on RZ/{A, G2L} SoC's has the same signal for both interrupt
and DMA transfer request. Setting DMARS register for DMA transfer
makes the signal to work as a DMA transfer request signal and
subsequent interrupt requests to the interrupt controller
are masked.
PIO fallback does not work as interrupt signal is disabled.
This patch fixes this issue by re-enabling the interrupts by
calling dmaengine_synchronize().
Juri Lelli [Thu, 14 Jul 2022 15:19:08 +0000 (17:19 +0200)]
sched/deadline: Fix BUG_ON condition for deboosted tasks
Tasks the are being deboosted from SCHED_DEADLINE might enter
enqueue_task_dl() one last time and hit an erroneous BUG_ON condition:
since they are not boosted anymore, the if (is_dl_boosted()) branch is
not taken, but the else if (!dl_prio) is and inside this one we
BUG_ON(!is_dl_boosted), which is of course false (BUG_ON triggered)
otherwise we had entered the if branch above. Long story short, the
current condition doesn't make sense and always leads to triggering of a
BUG.
Fix this by only checking enqueue flags, properly: ENQUEUE_REPLENISH has
to be present, but additional flags are not a problem.
Fixes: 88847a48d5b7 ("sched/deadline: Don't replenish from a !SCHED_DEADLINE entity") Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20220714151908.533052-1-juri.lelli@redhat.com
drm/amdgpu: Protect the amdgpu_bo_list list with a mutex v2
Protect the struct amdgpu_bo_list with a mutex. This is used during command
submission in order to avoid buffer object corruption as recorded in
the link below.
v2 (chk): Keep the mutex looked for the whole CS to avoid using the
list from multiple CS threads at the same time.
Suggested-by: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Cc: Vitaly Prosyak <Vitaly.Prosyak@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2048 Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Tested-by: Luben Tuikov <luben.tuikov@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
watchqueue: make sure to serialize 'wqueue->defunct' properly
When the pipe is closed, we mark the associated watchqueue defunct by
calling watch_queue_clear(). However, while that is protected by the
watchqueue lock, new watchqueue entries aren't actually added under that
lock at all: they use the pipe->rd_wait.lock instead, and looking up
that pipe happens without any locking.
The watchqueue code uses the RCU read-side section to make sure that the
wqueue entry itself hasn't disappeared, but that does not protect the
pipe_info in any way.
So make sure to actually hold the wqueue lock when posting watch events,
properly serializing against the pipe being torn down.
On a machine with the LBR format LBR_FORMAT_EIP_FLAGS2, when the TSX is
disabled, a TSX quirk is required to access LBR from registers.
The lbr_from_signext_quirk_needed() is introduced to determine whether
the TSX quirk should be applied. However, the
lbr_from_signext_quirk_needed() is invoked before the
intel_pmu_lbr_init(), which parses the LBR format information. Without
the correct LBR format information, the TSX quirk never be applied.
Move the lbr_from_signext_quirk_needed() into the intel_pmu_lbr_init().
Checking x86_pmu.lbr_has_tsx in the lbr_from_signext_quirk_needed() is
not required anymore.
Both LBR_FORMAT_EIP_FLAGS2 and LBR_FORMAT_INFO have LBR_TSX flag, but
only the LBR_FORMAT_EIP_FLAGS2 requirs the quirk. Update the comments
accordingly.
Fixes: 0dbfde4f576f ("perf/x86/intel/lbr: Support LBR format V7") Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20220714182630.342107-1-kan.liang@linux.intel.com
WARNING: CPU: 0 PID: 0 at arch/x86/kernel/alternative.c:557 apply_returns (arch/x86/kernel/alternative.c:557 (discriminator 1))
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.19.0-rc4-00008-gee88d363d156 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-4 04/01/2014
RIP: 0010:apply_returns (arch/x86/kernel/alternative.c:557 (discriminator 1))
Code: ff ff 74 cb 48 83 c5 04 49 39 ee 0f 87 81 fe ff ff e9 22 ff ff ff 0f 0b 48 83 c5 04 49 39 ee 0f 87 6d fe ff ff e9 0e ff ff ff <0f> 0b 48 83 c5 04 49 39 ee 0f 87 59 fe ff ff e9 fa fe ff ff 48 89
The warning happened when apply_returns() failed to convert "JMP
__x86_return_thunk" to RET. It was instead a JMP to nowhere, due to the
thunk relocation not getting resolved.
That rodata.o code is objcopy'd to .rodata, and later memcpy'd, so
relocations don't work (and are apparently silently ignored).
LKDTM is only used for testing, so the naked RET should be fine. So
just disable return thunks for that file.
While at it, disable objtool and KCSAN for the file.
Fixes: 84b05c840851 ("x86/retpoline: Use -mfunction-return") Reported-by: kernel test robot <oliver.sang@intel.com> Debugged-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/lkml/Ys58BxHxoDZ7rfpr@xsang-OptiPlex-9020/
x86/bugs: Warn when "ibrs" mitigation is selected on Enhanced IBRS parts
IBRS mitigation for spectre_v2 forces write to MSR_IA32_SPEC_CTRL at
every kernel entry/exit. On Enhanced IBRS parts setting
MSR_IA32_SPEC_CTRL[IBRS] only once at boot is sufficient. MSR writes at
every kernel entry/exit incur unnecessary performance loss.
When Enhanced IBRS feature is present, print a warning about this
unnecessary performance loss.
Eric Snowberg [Wed, 20 Jul 2022 16:40:27 +0000 (12:40 -0400)]
lockdown: Fix kexec lockdown bypass with ima policy
The lockdown LSM is primarily used in conjunction with UEFI Secure Boot.
This LSM may also be used on machines without UEFI. It can also be
enabled when UEFI Secure Boot is disabled. One of lockdown's features
is to prevent kexec from loading untrusted kernels. Lockdown can be
enabled through a bootparam or after the kernel has booted through
securityfs.
If IMA appraisal is used with the "ima_appraise=log" boot param,
lockdown can be defeated with kexec on any machine when Secure Boot is
disabled or unavailable. IMA prevents setting "ima_appraise=log" from
the boot param when Secure Boot is enabled, but this does not cover
cases where lockdown is used without Secure Boot.
To defeat lockdown, boot without Secure Boot and add ima_appraise=log to
the kernel command line; then:
spi: bcm2835: bcm2835_spi_handle_err(): fix NULL pointer deref for non DMA transfers
In case a IRQ based transfer times out the bcm2835_spi_handle_err()
function is called. Since commit c3ad4e82d4ce ("spi: bcm2835: Drop
dma_pending flag") the TX and RX DMA transfers are unconditionally
canceled, leading to NULL pointer derefs if ctlr->dma_tx or
ctlr->dma_rx are not set.
Fix the NULL pointer deref by checking that ctlr->dma_tx and
ctlr->dma_rx are valid pointers before accessing them.
Kent Gibson [Tue, 19 Jul 2022 11:06:01 +0000 (19:06 +0800)]
selftests: gpio: fix include path to kernel headers for out of tree builds
When building selftests out of the kernel tree the gpio.h the include
path is incorrect and the build falls back to the system includes
which may be outdated.
Add the KHDR_INCLUDES to the CFLAGS to include the gpio.h from the
build tree.
Fixes: 1fb08349f95c ("selftests: gpio: restore CFLAGS options") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
mlxsw needs to distinguish nexthops with a gateway from connected
nexthops in order to write the former to the adjacency table of the
device. The check used to rely on the fact that nexthops with a gateway
have a 'link' scope whereas connected nexthops have a 'host' scope. This
is no longer correct after commit 4be009aa4a33 ("ip: fix dflt addr
selection for connected nexthop").
Fix that by instead checking the address family of the gateway IP. This
is a more direct way and also consistent with the IPv6 counterpart in
mlxsw_sp_rt6_is_gateway().
Cc: stable@vger.kernel.org Fixes: 4be009aa4a33 ("ip: fix dflt addr selection for connected nexthop") Fixes: 4b16068d4069 ("nexthop: Add support for IPv4 nexthops") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
The cited commit refactored the flow action initialization sequence to
use an interface method when translating tc action instances to flow
offload objects. The refactored version skips the initialization of the
generic flow action attributes for tc actions, such as pedit, that allocate
more than one offload entry. This can cause potential issues for drivers
mapping flow action ids.
Populate the generic flow action fields for all the flow action entries.
Fixes: e80d8428e414 ("flow_offload: add ops to tc_action_ops for flow action setup") Signed-off-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com>
----
v1 -> v2:
- coalese the generic flow action fields initialization to a single loop Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
tcp: Fix data-races around sysctl_tcp_max_reordering.
While reading sysctl_tcp_max_reordering, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: 272888d08277 ("tcp: allow for bigger reordering level") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
tcp: Fix data-races around sysctl_tcp_slow_start_after_idle.
While reading sysctl_tcp_slow_start_after_idle, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: 10e7863a3141 ("[TCP]: Add tcp_slow_start_after_idle sysctl.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
tcp: Fix a data-race around sysctl_tcp_thin_linear_timeouts.
While reading sysctl_tcp_thin_linear_timeouts, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 0abed800963b ("net: TCP thin linear timeouts") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
While reading sysctl_tcp_recovery, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its readers.
Fixes: 7e0a80dae3ff ("tcp: use RACK to detect losses") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
tcp: Fix a data-race around sysctl_tcp_early_retrans.
While reading sysctl_tcp_early_retrans, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: c3b2487f9ff9 ("tcp: early retransmit") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
udp: Fix a data-race around sysctl_udp_l3mdev_accept.
While reading sysctl_udp_l3mdev_accept, it can be changed concurrently.
Thus, we need to add READ_ONCE() to its reader.
Fixes: 51e08476ae24 ("net: Avoid receiving packets with an l3mdev on unbound UDP sockets") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
sysctl_ip_prot_sock is accessed concurrently, and there is always a chance
of data-race. So, all readers and writers need some basic protection to
avoid load/store-tearing.
Fixes: e140ccaf7253 ("Introduce a sysctl that modifies the value of PROT_SOCK.") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ipv4: Fix data-races around sysctl_fib_multipath_hash_fields.
While reading sysctl_fib_multipath_hash_fields, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: 8b705ab1431e ("ipv4: Add a sysctl to control multipath hash fields") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ipv4: Fix data-races around sysctl_fib_multipath_hash_policy.
While reading sysctl_fib_multipath_hash_policy, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its readers.
Fixes: 71219452e6f1 ("net: ipv4: add support for ECMP hash policy choice") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ipv4: Fix a data-race around sysctl_fib_multipath_use_neigh.
While reading sysctl_fib_multipath_use_neigh, it can be changed
concurrently. Thus, we need to add READ_ONCE() to its reader.
Fixes: 372c9ef1123b ("net: ipv4: Consider failed nexthops in multipath routes") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In commit e583c00d7447 ("can: mcp251xfd: add support for mcp251863")
support for the mcp251863 was added. However it was not taken into
account that the auto detection of the chip model cannot distinguish
between mcp2518fd and mcp251863 and would lead to a warning message if
the firmware specifies a mcp251863.
Fix auto detection: If a mcp2518fd compatible chip is found, keep the
mcp251863 if specified by firmware, use mcp2518fd instead.
Liang He [Thu, 14 Jul 2022 08:13:37 +0000 (16:13 +0800)]
drm/imx/dcss: Add missing of_node_put() in fail path
In dcss_dev_create() and dcss_dev_destroy(), we should call of_node_put()
in fail path or before the dcss's destroy as of_graph_get_port_by_id() has
increased the refcount.
This patch re-introduces support for GuC v69 in parallel to v70. As this
is a quick fix, v69 has been re-introduced as the single "fallback" guc
version in case v70 is not available on disk and only for platforms that
are out of force_probe and require the GuC by default. All v69 specific
code has been labeled as such for easy identification, and the same was
done for all v70 functions for which there is a separate v69 version,
to avoid accidentally calling the wrong version via the unlabeled name.
When the fallback mode kicks in, a drm_notice message is printed in
dmesg to inform the user of the required update. The existing
logging of the fetch function has also been updated so that we no
longer complain immediately if we can't find a fw and we only throw an
error if the fetch of both the base and fallback blobs fails.
The plan is to follow this up with a more complex rework to allow for
multiple different GuC versions to be supported at the same time.
v2: reduce the fallback to platform that require it, switch to
firmware_request_nowarn(), improve logs.
Matthew Brost [Wed, 4 May 2022 23:46:36 +0000 (16:46 -0700)]
drm/i915/guc: Support programming the EU priority in the GuC descriptor
In GuC submission mode the EU priority must be updated by the GuC rather
than the driver as the GuC owns the programming of the context descriptor.
Given that the GuC code uses the GuC priorities, we can't use a generic
function using i915 priorities for both execlists and GuC submission.
The existing function has therefore been pushed to the execlists
back-end while a new one has been added for GuC.
Jakub Kicinski [Wed, 20 Jul 2022 00:43:02 +0000 (17:43 -0700)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-07-18
This series contains updates to iavf driver only.
Przemyslaw fixes handling of multiple VLAN requests to account for
individual errors instead of rejecting them all. He removes incorrect
implementations of ETHTOOL_COALESCE_MAX_FRAMES and
ETHTOOL_COALESCE_MAX_FRAMES_IRQ.
He also corrects an issue with NULL pointer caused by improper handling of
dummy receive descriptors. Finally, he corrects debug prints reporting an
unknown state.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix missing state logs
iavf: Fix handling of dummy receive descriptors
iavf: Disallow changing rx/tx-frames and rx/tx-frames-irq
iavf: Fix VLAN_V2 addition/rejection
====================
Xin Long [Mon, 18 Jul 2022 17:56:59 +0000 (13:56 -0400)]
Documentation: fix udp_wmem_min in ip-sysctl.rst
UDP doesn't support tx memory accounting, and sysctl udp_wmem_min
is not really used anywhere. So we should fix the description in
ip-sysctl.rst accordingly.
Lorenzo Bianconi [Mon, 18 Jul 2022 09:51:53 +0000 (11:51 +0200)]
net: ethernet: mtk_ppe: fix possible NULL pointer dereference in mtk_flow_get_wdma_info
odev pointer can be NULL in mtk_flow_offload_replace routine according
to the flower action rules. Fix possible NULL pointer dereference in
mtk_flow_get_wdma_info.
Hayes Wang [Mon, 18 Jul 2022 08:21:20 +0000 (16:21 +0800)]
r8152: fix a WOL issue
This fixes that the platform is waked by an unexpected packet. The
size and range of FIFO is different when the device enters S3 state,
so it is necessary to correct some settings when suspending.
Regardless of jumbo frame, set RMS to 1522 and MTPS to MTPS_DEFAULT.
Besides, enable MCU_BORW_EN to update the method of calculating the
pointer of data. Then, the hardware could get the correct data.
drm/panel-edp: Fix variable typo when saving hpd absent delay from DT
The value read from the "hpd-absent-delay-ms" property in DT was being
saved to the wrong variable, overriding the hpd_reliable delay. Fix the
typo.
Fixes: 52f0245b6f0e ("drm/panel-edp: Implement generic "edp-panel"s probed by EDID") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: André Almeida <andrealmeid@igalia.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220719203857.1488831-4-nfraprado@collabora.com
srcu: Make expedited RCU grace periods block even less frequently
The purpose of commit 203182ec86fb ("srcu: Prevent expedited GPs
and blocking readers from consuming CPU") was to prevent a long
series of never-blocking expedited SRCU grace periods from blocking
kernel-live-patching (KLP) progress. Although it was successful, it also
resulted in excessive boot times on certain embedded workloads running
under qemu with the "-bios QEMU_EFI.fd" command line. Here "excessive"
means increasing the boot time up into the three-to-four minute range.
This increase in boot time was due to the more than 6000 back-to-back
invocations of synchronize_rcu_expedited() within the KVM host OS, which
in turn resulted from qemu's emulation of a long series of MMIO accesses.
Commit 640a7d37c3f4 ("srcu: Block less aggressively for expedited grace
periods") did not significantly help this particular use case.
Zhangfei Gao and Shameerali Kolothum Thodi did experiments varying the
value of SRCU_MAX_NODELAY_PHASE with HZ=250 and with various values
of non-sleeping per phase counts on a system with preemption enabled,
and observed the following boot times:
Analysis on the experiment results show additional improvements with
CPU-bound delays approaching one jiffy in duration. This improvement was
also seen when number of per-phase iterations were scaled to one jiffy.
This commit therefore scales per-grace-period phase number of non-sleeping
polls so that non-sleeping polls extend for about one jiffy. In addition,
the delay-calculation call to srcu_get_delay() in srcu_gp_end() is
replaced with a simple check for an expedited grace period. This change
schedules callback invocation immediately after expedited grace periods
complete, which results in greatly improved boot times. Testing done
by Marc and Zhangfei confirms that this change recovers most of the
performance degradation in boottime; for CONFIG_HZ_250 configuration,
specifically, boot times improve from 3m50s to 41s on Marc's setup;
and from 2m40s to ~9.7s on Zhangfei's setup.
In addition to the changes to default per phase delays, this
change adds 3 new kernel parameters - srcutree.srcu_max_nodelay,
srcutree.srcu_max_nodelay_phase, and srcutree.srcu_retry_check_delay.
This allows users to configure the srcu grace period scanning delays in
order to more quickly react to additional use cases.
Fixes: 640a7d37c3f4 ("srcu: Block less aggressively for expedited grace periods") Fixes: 203182ec86fb ("srcu: Prevent expedited GPs and blocking readers from consuming CPU") Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org> Reported-by: yueluck <yueluck@163.com> Signed-off-by: Neeraj Upadhyay <quic_neeraju@quicinc.com> Tested-by: Marc Zyngier <maz@kernel.org> Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org> Link: https://lore.kernel.org/all/20615615-0013-5adc-584f-2b1d5c03ebfc@linaro.org/ Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Paul E. McKenney [Sun, 12 Jun 2022 22:00:06 +0000 (15:00 -0700)]
srcu: Block less aggressively for expedited grace periods
Commit 203182ec86fb ("srcu: Prevent expedited GPs and blocking readers
from consuming CPU") fixed a problem where a long-running expedited SRCU
grace period could block kernel live patching. It did so by giving up
on expediting once a given SRCU expedited grace period grew too old.
Unfortunately, this added excessive delays to boots of virtual embedded
systems specifying "-bios QEMU_EFI.fd" to qemu. This commit therefore
makes the transition away from expediting less aggressive, increasing
the per-grace-period phase number of non-sleeping polls of readers from
one to three and increasing the required grace-period age from one jiffy
(actually from zero to one jiffies) to two jiffies (actually from one
to two jiffies).
Fixes: 203182ec86fb ("srcu: Prevent expedited GPs and blocking readers from consuming CPU") Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org> Reported-by: chenxiang (M)" <chenxiang66@hisilicon.com> Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Neeraj Upadhyay <quic_neeraju@quicinc.com> Link: https://lore.kernel.org/all/20615615-0013-5adc-584f-2b1d5c03ebfc@linaro.org/
Aaron Lewis [Thu, 14 Jul 2022 16:13:15 +0000 (16:13 +0000)]
KVM: x86: Protect the unused bits in MSR exiting flags
The flags for KVM_CAP_X86_USER_SPACE_MSR and KVM_X86_SET_MSR_FILTER
have no protection for their unused bits. Without protection, future
development for these features will be difficult. Add the protection
needed to make it possible to extend these features in the future.
Signed-off-by: Aaron Lewis <aaronlewis@google.com>
Message-Id: <20220714161314.1715227-1-aaronlewis@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 19 Jul 2022 13:16:53 +0000 (09:16 -0400)]
tools headers UAPI: Sync linux/kvm.h with the kernel sources
Silence this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: selftests: Fix target thread to be migrated in rseq_test
In rseq_test, there are two threads, which are vCPU thread and migration
worker separately. Unfortunately, the test has the wrong PID passed to
sched_setaffinity() in the migration worker. It forces migration on the
migration worker because zeroed PID represents the calling thread, which
is the migration worker itself. It means the vCPU thread is never enforced
to migration and it can migrate at any time, which eventually leads to
failure as the following logs show.
host# uname -r
5.19.0-rc6-gavin+
host# # cat /proc/cpuinfo | grep processor | tail -n 1
processor : 223
host# pwd
/home/gavin/sandbox/linux.main/tools/testing/selftests/kvm
host# for i in `seq 1 100`; do \
echo "--------> $i"; ./rseq_test; done
--------> 1
--------> 2
--------> 3
--------> 4
--------> 5
--------> 6
==== Test Assertion Failure ====
rseq_test.c:265: rseq_cpu == cpu
pid=3925 tid=3925 errno=4 - Interrupted system call
1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2)
2 0x0000ffffb044affb: ?? ??:0
3 0x0000ffffb044b0c7: ?? ??:0
4 0x0000000000401a6f: _start at ??:?
rseq CPU = 4, sched CPU = 27
Fix the issue by passing correct parameter, TID of the vCPU thread, to
sched_setaffinity() in the migration worker.
Fixes: 3bd616c79b1f ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs") Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220719020830.3479482-1-gshan@redhat.com> Reviewed-by: Andrew Jones <andrew.jones@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
====================
amt: fix validation and synchronization bugs
There are some synchronization issues in the amt module.
Especially, an amt gateway doesn't well synchronize its own variables
and status(amt->status).
It tries to use a workqueue for handles in a single thread.
A global lock is also good, but it would occur complex locking complex.
In this patchset, only the gateway uses workqueue.
The reason why only gateway interface uses workqueue is that gateway
should manage its own states and variables a little bit statefully.
But relay doesn't need to manage tunnels statefully, stateless is okay.
So, relay side message handlers are okay to be called concurrently.
But it doesn't mean that no lock is needed.
Only amt multicast data message type will not be processed by the work
queue because It contains actual multicast data.
So, it should be processed immediately.
When any amt gateway events are triggered(sending discovery message by
delayed_work, sending request message by delayed_work and receiving
messages), it stores event and skb into the event queue(amt->events[16]).
Then, workqueue processes these events one by one.
The first patch is to use the work queue.
The second patch is to remove unnecessary lock due to a previous patch.
The third patch is to use READ_ONCE() in the amt module.
Even if the amt module uses a single thread, some variables (ready4,
ready6, amt->status) can be accessed concurrently.
The fourth patch is to add missing nonce generation logic when it sends a
new request message.
The fifth patch is to drop unexpected advertisement messages.
advertisement message should be received only after the gateway sends
a discovery message first.
So, the gateway should drop advertisement messages if it has never
sent a discovery message and it also should drop duplicate advertisement
messages.
Using nonce is good to distinguish whether a received message is an
expected message or not.
The sixth patch is to drop unexpected query messages.
This is the same behavior as the fourth patch.
Query messages should be received only after the gateway sends a request
message first.
The nonce variable is used to distinguish whether it is a reply to a
previous request message or not.
amt->ready4 and amt->ready6 are used to distinguish duplicate messages.
The seventh patch is to drop unexpected multicast data.
AMT gateway should not receive multicast data message type before
establish between gateway and relay.
In order to drop unexpected multicast data messages, it checks amt->status.
The last patch is to fix a locking problem on the relay side.
amt->nr_tunnels variable is protected by amt->lock.
But amt_request_handler() doesn't protect this variable.
v2:
- Use local_bh_disable() instead of rcu_read_lock_bh() in
amt_membership_query_handler.
- Fix using uninitialized variables.
- Fix unexpectedly start the event_wq after stopping.
- Fix possible deadlock in amt_event_work().
- Add a limit variable in amt_event_work() to prevent infinite working.
- Rename amt_queue_events() to amt_queue_event().
====================
amt->nr_tunnels is protected by amt->lock.
But, amt_request_handler() has been using this variable without the
amt->lock.
So, it expands context of amt->lock in the amt_request_handler() to
protect amt->nr_tunnels variable.
Fixes: 19284cc854b3 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
AMT gateway interface should not receive unexpected multicast data.
Multicast data message type should be received after sending an update
message, which means all establishment between gateway and relay is
finished.
So, amt_multicast_data_handler() checks amt->status.
Fixes: 19284cc854b3 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
AMT gateway interface should not receive unexpected query messages.
In order to drop unexpected query messages, it checks nonce.
And it also checks ready4 and ready6 variables to drop duplicated messages.
Fixes: 19284cc854b3 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
AMT gateway interface should not receive unexpected advertisement messages.
In order to drop these packets, it should check nonce and amt->status.
Fixes: 19284cc854b3 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
amt: add missing regeneration nonce logic in request logic
When AMT gateway starts sending a new request message, it should
regenerate the nonce variable.
Fixes: 19284cc854b3 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are some data races in the amt module.
amt->ready4, amt->ready6, and amt->status can be accessed concurrently
without locks.
So, it uses READ_ONCE() and WRITE_ONCE().
Fixes: 19284cc854b3 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
By the previous patch, amt gateway handlers are changed to worked by
a single thread.
So, most locks for gateway are not needed.
So, it removes.
Fixes: 19284cc854b3 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
amt: use workqueue for gateway side message handling
There are some synchronization issues(amt->status, amt->req_cnt, etc)
if the interface is in gateway mode because gateway message handlers
are processed concurrently.
This applies a work queue for processing these messages instead of
expanding the locking context.
So, the purposes of this patch are to fix exist race conditions and to make
gateway to be able to validate a gateway status more correctly.
When the AMT gateway interface is created, it tries to establish to relay.
The establishment step looks stateless, but it should be managed well.
In order to handle messages in the gateway, it saves the current
status(i.e. AMT_STATUS_XXX).
This patch makes gateway code to be worked with a single thread.
Now, all messages except the multicast are triggered(received or
delay expired), and these messages will be stored in the event
queue(amt->events).
Then, the single worker processes stored messages asynchronously one
by one.
The multicast data message type will be still processed immediately.
Now, amt->lock is only needed to access the event queue(amt->events)
if an interface is the gateway mode.
Fixes: 19284cc854b3 ("amt: add data plane of amt interface") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fixes: c7c9cc561a47 ("spi: Check we have a spi_device_id for each DT compatible") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220717135831.2492844-2-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add spi_device_id entries to silent following warnings:
SPI driver sja1105 has no spi_device_id for nxp,sja1105e
SPI driver sja1105 has no spi_device_id for nxp,sja1105t
SPI driver sja1105 has no spi_device_id for nxp,sja1105p
SPI driver sja1105 has no spi_device_id for nxp,sja1105q
SPI driver sja1105 has no spi_device_id for nxp,sja1105r
SPI driver sja1105 has no spi_device_id for nxp,sja1105s
SPI driver sja1105 has no spi_device_id for nxp,sja1110a
SPI driver sja1105 has no spi_device_id for nxp,sja1110b
SPI driver sja1105 has no spi_device_id for nxp,sja1110c
SPI driver sja1105 has no spi_device_id for nxp,sja1110d
Fixes: c7c9cc561a47 ("spi: Check we have a spi_device_id for each DT compatible") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220717135831.2492844-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
be2net: Fix buffer overflow in be_get_module_eeprom
be_cmd_read_port_transceiver_data assumes that it is given a buffer that
is at least PAGE_DATA_LEN long, or twice that if the module supports SFF
8472. However, this is not always the case.
Fix this by passing the desired offset and length to
be_cmd_read_port_transceiver_data so that we only copy the bytes once.
gpio: pca953x: use the correct range when do regmap sync
regmap will sync a range of registers, here use the correct range
to make sure the sync do not touch other unexpected registers.
Find on pca9557pw on imx8qxp/dxl evk board, this device support
8 pin, so only need one register(8 bits) to cover all the 8 pins's
property setting. But when sync the output, we find it actually
update two registers, output register and the following register.
projects / kernel.git / log