Linus Torvalds [Sun, 22 Mar 2020 17:46:50 +0000 (10:46 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"10 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
x86/mm: split vmalloc_sync_all()
mm, slub: prevent kmalloc_node crashes and memory leaks
mm/mmu_notifier: silence PROVE_RCU_LIST warnings
epoll: fix possible lost wakeup on epoll_ctl() path
mm: do not allow MADV_PAGEOUT for CoW pages
mm, memcg: throttle allocators based on ancestral memory.high
mm, memcg: fix corruption on 64-bit divisor in memory.high throttling
page-flags: fix a crash at SetPageError(THP_SWAP)
mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case
memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event
Joerg Roedel [Sun, 22 Mar 2020 01:22:41 +0000 (18:22 -0700)]
x86/mm: split vmalloc_sync_all()
Commit 7729f4cc5e73 ("mm/vmalloc: Sync unmappings in
__purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in
the vunmap() code-path. While this change was necessary to maintain
correctness on x86-32-pae kernels, it also adds additional cycles for
architectures that don't need it.
Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported
severe performance regressions in micro-benchmarks because it now also
calls the x86-64 implementation of vmalloc_sync_all() on vunmap(). But
the vmalloc_sync_all() implementation on x86-64 is only needed for newly
created mappings.
To avoid the unnecessary work on x86-64 and to gain the performance
back, split up vmalloc_sync_all() into two functions:
* vmalloc_sync_mappings(), and
* vmalloc_sync_unmappings()
Most call-sites to vmalloc_sync_all() only care about new mappings being
synchronized. The only exception is the new call-site added in the
above mentioned commit.
Shile Zhang directed us to a report of an 80% regression in reaim
throughput.
Fixes: 7729f4cc5e73 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()") Reported-by: kernel test robot <oliver.sang@intel.com> Reported-by: Shile Zhang <shile.zhang@linux.alibaba.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Borislav Petkov <bp@suse.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [GHES] Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/ Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This only happens with a mmotm patch "mm/memcontrol.c: allocate
shrinker_map on appropriate NUMA node" [2] which effectively calls
kmalloc_node for each possible node. SLUB however only allocates
kmem_cache_node on online N_NORMAL_MEMORY nodes, and relies on
node_to_mem_node to return such valid node for other nodes since commit 4539765395ae ("slub: fall back to node_to_mem_node() node if allocating
on memoryless node"). This is however not true in this configuration
where the _node_numa_mem_ array is not initialized for nodes 0 and 2-31,
thus it contains zeroes and get_partial() ends up accessing
non-allocated kmem_cache_node.
A related issue was reported by Bharata (originally by Ramachandran) [3]
where a similar PowerPC configuration, but with mainline kernel without
patch [2] ends up allocating large amounts of pages by kmalloc-1k
kmalloc-512. This seems to have the same underlying issue with
node_to_mem_node() not behaving as expected, and might probably also
lead to an infinite loop with CONFIG_SLUB_CPU_PARTIAL [4].
This patch should fix both issues by not relying on node_to_mem_node()
anymore and instead simply falling back to NUMA_NO_NODE, when
kmalloc_node(node) is attempted for a node that's not online, or has no
usable memory. The "usable memory" condition is also changed from
node_present_pages() to N_NORMAL_MEMORY node state, as that is exactly
the condition that SLUB uses to allocate kmem_cache_node structures.
The check in get_partial() is removed completely, as the checks in
___slab_alloc() are now sufficient to prevent get_partial() being
reached with an invalid node.
Qian Cai [Sun, 22 Mar 2020 01:22:34 +0000 (18:22 -0700)]
mm/mmu_notifier: silence PROVE_RCU_LIST warnings
It is safe to traverse mm->notifier_subscriptions->list either under
SRCU read lock or mm->notifier_subscriptions->lock using
hlist_for_each_entry_rcu(). Silence the PROVE_RCU_LIST false positives,
for example,
Signed-off-by: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Link: http://lkml.kernel.org/r/20200317175640.2047-1-cai@lca.pw Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Penyaev [Sun, 22 Mar 2020 01:22:30 +0000 (18:22 -0700)]
epoll: fix possible lost wakeup on epoll_ctl() path
This fixes possible lost wakeup introduced by commit fbb40e37cc41.
Originally modifications to ep->wq were serialized by ep->wq.lock, but
in commit fbb40e37cc41 ("epoll: use rwlock in order to reduce
ep_poll_callback() contention") a new rw lock was introduced in order to
relax fd event path, i.e. callers of ep_poll_callback() function.
After the change ep_modify and ep_insert (both are called on epoll_ctl()
path) were switched to ep->lock, but ep_poll (epoll_wait) was using
ep->wq.lock on wqueue list modification.
The bug doesn't lead to any wqueue list corruptions, because wake up
path and list modifications were serialized by ep->wq.lock internally,
but actual waitqueue_active() check prior wake_up() call can be
reordered with modifications of ep ready list, thus wake up can be lost.
And yes, can be healed by explicit smp_mb():
list_add_tail(&epi->rdlink, &ep->rdllist);
smp_mb();
if (waitqueue_active(&ep->wq))
wake_up(&ep->wp);
But let's make it simple, thus current patch replaces ep->wq.lock with
the ep->lock for wqueue modifications, thus wake up path always observes
activeness of the wqueue correcty.
Fixes: fbb40e37cc41 ("epoll: use rwlock in order to reduce ep_poll_callback() contention") Reported-by: Max Neunhoeffer <max@arangodb.com> Signed-off-by: Roman Penyaev <rpenyaev@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Max Neunhoeffer <max@arangodb.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Christopher Kohlhoff <chris.kohlhoff@clearpool.io> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Jes Sorensen <jes.sorensen@gmail.com> Cc: <stable@vger.kernel.org> [5.1+] Link: http://lkml.kernel.org/r/20200214170211.561524-1-rpenyaev@suse.de
References: https://bugzilla.kernel.org/show_bug.cgi?id=205933 Bisected-by: Max Neunhoeffer <max@arangodb.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Sun, 22 Mar 2020 01:22:26 +0000 (18:22 -0700)]
mm: do not allow MADV_PAGEOUT for CoW pages
Jann has brought up a very interesting point [1]. While shared pages
are excluded from MADV_PAGEOUT normally, CoW pages can be easily
reclaimed that way. This can lead to all sorts of hard to debug
problems. E.g. performance problems outlined by Daniel [2].
There are runtime environments where there is a substantial memory
shared among security domains via CoW memory and a easy to reclaim way
of that memory, which MADV_{COLD,PAGEOUT} offers, can lead to either
performance degradation in for the parent process which might be more
privileged or even open side channel attacks.
The feasibility of the latter is not really clear to me TBH but there is
no real reason for exposure at this stage. It seems there is no real
use case to depend on reclaiming CoW memory via madvise at this stage so
it is much easier to simply disallow it and this is what this patch
does. Put it simply MADV_{PAGEOUT,COLD} can operate only on the
exclusively owned memory which is a straightforward semantic.
Chris Down [Sun, 22 Mar 2020 01:22:23 +0000 (18:22 -0700)]
mm, memcg: throttle allocators based on ancestral memory.high
Prior to this commit, we only directly check the affected cgroup's
memory.high against its usage. However, it's possible that we are being
reclaimed as a result of hitting an ancestor memory.high and should be
penalised based on that, instead.
This patch changes memory.high overage throttling to use the largest
overage in its ancestors when considering how many penalty jiffies to
charge. This makes sure that we penalise poorly behaving cgroups in the
same way regardless of at what level of the hierarchy memory.high was
breached.
Fixes: d5e7ccefdea7 ("mm, memcg: throttle allocators when failing reclaim over memory.high") Reported-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> [5.4.x+] Link: http://lkml.kernel.org/r/8cd132f84bd7e16cdb8fde3378cdbf05ba00d387.1584036142.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Chris Down [Sun, 22 Mar 2020 01:22:20 +0000 (18:22 -0700)]
mm, memcg: fix corruption on 64-bit divisor in memory.high throttling
Commit d5e7ccefdea7 had a bunch of fixups to use the right division
method. However, it seems that after all that it still wasn't right --
div_u64 takes a 32-bit divisor.
The headroom is still large (2^32 pages), so on mundane systems you
won't hit this, but this should definitely be fixed.
Fixes: d5e7ccefdea7 ("mm, memcg: throttle allocators when failing reclaim over memory.high") Reported-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Chris Down <chris@chrisdown.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nathan Chancellor <natechancellor@gmail.com> Cc: <stable@vger.kernel.org> [5.4.x+] Link: http://lkml.kernel.org/r/80780887060514967d414b3cd91f9a316a16ab98.1584036142.git.chris@chrisdown.name Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Qian Cai [Sun, 22 Mar 2020 01:22:17 +0000 (18:22 -0700)]
page-flags: fix a crash at SetPageError(THP_SWAP)
Commit 3c1dfa94c0b9 ("mm, THP, swap: delay splitting THP after swapped
out") supported writing THP to a swap device but forgot to upgrade an
older commit eba0ec0f4113 ("page-flags: define behavior of FS/IO-related
flags on compound pages") which could trigger a crash during THP
swapping out with DEBUG_VM_PGFLAGS=y,
Baoquan He [Sun, 22 Mar 2020 01:22:13 +0000 (18:22 -0700)]
mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case
In section_deactivate(), pfn_to_page() doesn't work any more after
ms->section_mem_map is resetting to NULL in SPARSEMEM|!VMEMMAP case. It
causes a hot remove failure:
Chunguang Xu [Sun, 22 Mar 2020 01:22:10 +0000 (18:22 -0700)]
memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event
An eventfd monitors multiple memory thresholds of the cgroup, closes them,
the kernel deletes all events related to this eventfd. Before all events
are deleted, another eventfd monitors the memory threshold of this cgroup,
leading to a crash:
We can reproduce this problem in the following ways:
1. We create a new cgroup subdirectory and a new eventfd, and then we
monitor multiple memory thresholds of the cgroup through this eventfd.
2. closing this eventfd, and __mem_cgroup_usage_unregister_event ()
will be called multiple times to delete all events related to this
eventfd.
The first time __mem_cgroup_usage_unregister_event() is called, the
kernel will clear all items related to this eventfd in thresholds->
primary.
Since there is currently only one eventfd, thresholds-> primary becomes
empty, so the kernel will set thresholds-> primary and hresholds-> spare
to NULL. If at this time, the user creates a new eventfd and monitor
the memory threshold of this cgroup, kernel will re-initialize
thresholds-> primary.
Then when __mem_cgroup_usage_unregister_event () is called for the
second time, because thresholds-> primary is not empty, the system will
access thresholds-> spare, but thresholds-> spare is NULL, which will
trigger a crash.
In general, the longer it takes to delete all events related to this
eventfd, the easier it is to trigger this problem.
The solution is to check whether the thresholds associated with the
eventfd has been cleared when deleting the event. If so, we do nothing.
[akpm@linux-foundation.org: fix comment, per Kirill] Fixes: 78d99f1a569c ("cgroups: make cftype.unregister_event() void-returning") Signed-off-by: Chunguang Xu <brookxu@tencent.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/077a6f67-aefa-4591-efec-f2f3af2b0b02@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 21 Mar 2020 19:08:26 +0000 (12:08 -0700)]
Merge tag 'block-5.6-20200320' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Just two NVMe fabrics fixes that should go into 5.6"
* tag 'block-5.6-20200320' of git://git.kernel.dk/linux-block:
nvmet-tcp: set MSG_MORE only if we actually have more to send
nvme-rdma: Avoid double freeing of async event data
Linus Torvalds [Sat, 21 Mar 2020 18:54:47 +0000 (11:54 -0700)]
Merge tag 'io_uring-5.6-20200320' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Two different fixes in here:
- Fix for a potential NULL pointer deref for links with async or
drain marked (Pavel)
- Fix for not properly checking RLIMIT_NOFILE for async punted
operations.
This affects openat/openat2, which were added this cycle, and
accept4. I did a full audit of other cases where we might check
current->signal->rlim[] and found only RLIMIT_FSIZE for buffered
writes and fallocate. That one is fixed and queued for 5.7 and
marked stable"
* tag 'io_uring-5.6-20200320' of git://git.kernel.dk/linux-block:
io_uring: make sure accept honor rlimit nofile
io_uring: make sure openat/openat2 honor rlimit nofile
io_uring: NULL-deref for IOSQE_{ASYNC,DRAIN}
Linus Torvalds [Sat, 21 Mar 2020 18:50:36 +0000 (11:50 -0700)]
Merge branch 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
"Update to turbostat v20.03.20.
These patches unlock the full turbostat features for some new
machines, plus a couple other minor tweaks"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: update version
tools/power turbostat: Print cpuidle information
tools/power turbostat: Fix 32-bit capabilities warning
tools/power turbostat: Fix missing SYS_LPI counter on some Chromebooks
tools/power turbostat: Support Elkhart Lake
tools/power turbostat: Support Jasper Lake
tools/power turbostat: Support Ice Lake server
tools/power turbostat: Support Tiger Lake
tools/power turbostat: Fix gcc build warnings
tools/power turbostat: Support Cometlake
Linus Torvalds [Sat, 21 Mar 2020 15:51:45 +0000 (08:51 -0700)]
Merge tag 'powerpc-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two fixes for bugs introduced this cycle:
- fix a crash when shutting down a KVM PR guest (our original style
of KVM which doesn't use hypervisor mode)
- fix for the recently added 32-bit KASAN_VMALLOC support
Thanks to: Christophe Leroy, Greg Kurz, Sean Christopherson"
* tag 'powerpc-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Fix kernel crash with PR KVM
powerpc/kasan: Fix shadow memory protection with CONFIG_KASAN_VMALLOC
Jens Axboe [Sat, 21 Mar 2020 01:14:16 +0000 (19:14 -0600)]
Merge branch 'nvme-5.6-rc6' of git://git.infradead.org/nvme into block-5.6
Pull NVMe fixes from Keith:
"Two late nvme fabrics fixes for 5.6: a double free with the rdma
transport, and a regression fix for tcp; please pull."
* 'nvme-5.6-rc6' of git://git.infradead.org/nvme:
nvmet-tcp: set MSG_MORE only if we actually have more to send
nvme-rdma: Avoid double freeing of async event data
Sagi Grimberg [Thu, 12 Mar 2020 23:06:38 +0000 (16:06 -0700)]
nvmet-tcp: set MSG_MORE only if we actually have more to send
When we send PDU data, we want to optimize the tcp stack
operation if we have more data to send. So when we set MSG_MORE
when:
- We have more fragments coming in the batch, or
- We have a more data to send in this PDU
- We don't have a data digest trailer
- We optimize with the SUCCESS flag and omit the NVMe completion
(used if sq_head pointer update is disabled)
This addresses a regression in QD=1 with SUCCESS flag optimization
as we unconditionally set MSG_MORE when we didn't actually have
more data to send.
Fixes: d0b9db9d3604 ("nvmet-tcp: implement C2HData SUCCESS optimization") Reported-by: Mark Wunderlich <mark.wunderlich@intel.com> Tested-by: Mark Wunderlich <mark.wunderlich@intel.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
Linus Torvalds [Fri, 20 Mar 2020 16:28:25 +0000 (09:28 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Fix panic() when it occurs during secondary CPU startup
- Fix "kpti=off" when KASLR is enabled
- Fix howler in compat syscall table for vDSO clock_getres() fallback
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: compat: Fix syscall number of compat_clock_getres
arm64: kpti: Fix "kpti=off" when KASLR is enabled
arm64: smp: fix crash_smp_send_stop() behaviour
arm64: smp: fix smp_send_stop() behaviour
Linus Torvalds [Fri, 20 Mar 2020 16:24:22 +0000 (09:24 -0700)]
Merge tag 'char-misc-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small different driver fixes for 5.6-rc7:
- binderfs fix, yet again
- slimbus new device id added
- hwtracing bugfixes for reported issues and a new device id
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
intel_th: pci: Add Elkhart Lake CPU support
intel_th: Fix user-visible error codes
intel_th: msu: Fix the unexpected state warning
stm class: sys-t: Fix the use of time_after()
slimbus: ngd: add v2.1.0 compatible
binderfs: use refcount for binder control devices too
Linus Torvalds [Fri, 20 Mar 2020 16:20:38 +0000 (09:20 -0700)]
Merge tag 'staging-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are a number of small staging and IIO driver fixes for 5.6-rc7
Nothing major here, just resolutions for some reported problems:
- iio bugfixes for a number of different drivers
- greybus loopback_test fixes
- wfx driver fixes
All of these have been in linux-next with no reported issues"
* tag 'staging-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8188eu: Add device id for MERCUSYS MW150US v2
staging: greybus: loopback_test: fix potential path truncations
staging: greybus: loopback_test: fix potential path truncation
staging: greybus: loopback_test: fix poll-mask build breakage
staging: wfx: fix RCU usage between hif_join() and ieee80211_bss_get_ie()
staging: wfx: fix RCU usage in wfx_join_finalize()
staging: wfx: make warning about pending frame less scary
staging: wfx: fix lines ending with a comma instead of a semicolon
staging: wfx: fix warning about freeing in-use mutex during device unregister
staging/speakup: fix get_word non-space look-ahead
iio: ping: set pa_laser_ping_cfg in of_ping_match
iio: chemical: sps30: fix missing triggered buffer dependency
iio: st_sensors: remap SMO8840 to LIS2DH12
iio: light: vcnl4000: update sampling periods for vcnl4040
iio: light: vcnl4000: update sampling periods for vcnl4200
iio: accel: adxl372: Set iio_chan BE
iio: magnetometer: ak8974: Fix negative raw values in sysfs
iio: trigger: stm32-timer: disable master mode when stopping
iio: adc: stm32-dfsdm: fix sleep in atomic context
iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
Linus Torvalds [Fri, 20 Mar 2020 16:16:35 +0000 (09:16 -0700)]
Merge tag 'usb-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.6-rc7. And there's a thunderbolt
driver fix thrown in for good measure as well.
These fixes are:
- new device ids for usb-serial drivers
- thunderbolt error code fix
- xhci driver fixes
- typec fixes
- cdc-acm driver fixes
- chipidea driver fix
- more USB quirks added for devices that need them.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: cdc-acm: fix rounding error in TIOCSSERIAL
USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL
usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters
usb: chipidea: udc: fix sleeping function called from invalid context
USB: serial: pl2303: add device-id for HP LD381
USB: serial: option: add ME910G1 ECM composition 0x110b
usb: host: xhci-plat: add a shutdown
usb: typec: ucsi: displayport: Fix a potential race during registration
usb: typec: ucsi: displayport: Fix NULL pointer dereference
USB: Disable LPM on WD19's Realtek Hub
usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c
xhci: Do not open code __print_symbolic() in xhci trace events
thunderbolt: Fix error code in tb_port_is_width_supported()
Linus Torvalds [Fri, 20 Mar 2020 16:10:29 +0000 (09:10 -0700)]
Merge tag 'sound-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few fixes covering the issues reported by syzkaller, a couple of
fixes for the MIDI decoding bug, and a few usual HD-audio quirks.
Some of them are about ALSA core stuff, but they are small fixes just
for corner cases, and nothing thrilling"
* tag 'sound-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Enable the headset of Acer N50-600 with ALC662
ALSA: hda/realtek - Enable headset mic of Acer X2660G with ALC662
ALSA: seq: oss: Fix running status after receiving sysex
ALSA: seq: virmidi: Fix running status after receiving sysex
ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks
ALSA: hda/realtek: Fix pop noise on ALC225
ALSA: line6: Fix endless MIDI read loop
ALSA: pcm: oss: Avoid plugin buffer overflow
Linus Torvalds [Fri, 20 Mar 2020 16:03:54 +0000 (09:03 -0700)]
Merge tag 'drm-fixes-2020-03-20' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Hope you are well hiding out above the garage. A few amdgpu changes
but nothing too major. I've had a wisdom tooth out this week so
haven't been to on top of things, but all seems good.
core:
- fix lease warning
i915:
- Track active elements during dequeue
- Fix failure to handle all MCR ranges
- Revert unnecessary workaround
amdgpu:
- Pageflip fix
- VCN clockgating fixes
- GPR debugfs fix for umr
- GPU reset fix
- eDP fix for MBP
- DCN2.x fix
dw-hdmi:
- fix AVI frame colorimetry
komeda:
- fix compiler warning
bochs:
- downgrade a binding failure to a warning"
* tag 'drm-fixes-2020-03-20' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Fix pageflip event race condition for DCN.
drm/amdgpu: fix typo for vcn2.5/jpeg2.5 idle check
drm/amdgpu: fix typo for vcn2/jpeg2 idle check
drm/amdgpu: fix typo for vcn1 idle check
drm/lease: fix WARNING in idr_destroy
drm/i915: Handle all MCR ranges
Revert "drm/i915/tgl: Add extra hdc flush workaround"
drm/i915/execlists: Track active elements during dequeue
drm/bochs: downgrade pci_request_region failure from error to warning
drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017
drm/amdgpu: add fbdev suspend/resume on gpu reset
drm/amd/amdgpu: Fix GPR read from debugfs (v2)
drm/amd/display: fix typos for dcn20_funcs and dcn21_funcs struct
drm/komeda: mark PM functions as __maybe_unused
drm/bridge: dw-hdmi: fix AVI frame colorimetry
Jens Axboe [Fri, 20 Mar 2020 02:16:56 +0000 (20:16 -0600)]
io_uring: make sure accept honor rlimit nofile
Just like commit 9213ac4e7015, this fixes the fact that
IORING_OP_ACCEPT ends up using get_unused_fd_flags(), which checks
current->signal->rlim[] for limits.
Add an extra argument to __sys_accept4_file() that allows us to pass
in the proper nofile limit, and grab it at request prep time.
Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Fri, 20 Mar 2020 01:23:18 +0000 (19:23 -0600)]
io_uring: make sure openat/openat2 honor rlimit nofile
Dmitry reports that a test case shows that io_uring isn't honoring a
modified rlimit nofile setting. get_unused_fd_flags() checks the task
signal->rlimi[] for the limits. As this isn't easily inheritable,
provide a __get_unused_fd_flags() that takes the value instead. Then we
can grab it when the request is prepared (from the original task), and
pass that in when we do the async part part of the open.
Reported-by: Dmitry Kadashev <dkadashev@gmail.com> Tested-by: Dmitry Kadashev <dkadashev@gmail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Len Brown [Thu, 19 Mar 2020 22:26:05 +0000 (18:26 -0400)]
tools/power turbostat: Fix missing SYS_LPI counter on some Chromebooks
Some Chromebook BIOS' do not export an ACPI LPIT, which is how
Linux finds the residency counter for CPU and SYSTEM low power states,
that is exports in /sys/devices/system/cpu/cpuidle/*residency_us
When these sysfs attributes are missing, check the debugfs attrubte
from the pmc_core driver, which accesses the same counter value.
This is caused by a use-after-free in kvmppc_mmu_pte_flush_all()
which dereferences vcpu->arch.book3s which was previously freed by
kvmppc_core_vcpu_free_pr(). This happens because kvmppc_mmu_destroy()
is called after kvmppc_core_vcpu_free() since commit f4c8e3b3fb2e
("KVM: PPC: Move kvm_vcpu_init() invocation to common code").
The kvmppc_mmu_destroy() helper calls one of the following depending
on the KVM backend:
- kvmppc_mmu_destroy_hv() which does nothing (Book3s HV)
- kvmppc_mmu_destroy_pr() which undoes the effects of
kvmppc_mmu_init() (Book3s PR 32-bit)
- kvmppc_mmu_destroy_pr() which undoes the effects of
kvmppc_mmu_init() (Book3s PR 64-bit)
- kvmppc_mmu_destroy_e500() which does nothing (BookE e500/e500mc)
It turns out that this is only relevant to PR KVM actually. And both
32 and 64 backends need vcpu->arch.book3s to be valid when calling
kvmppc_mmu_destroy_pr(). So instead of calling kvmppc_mmu_destroy()
from kvm_arch_vcpu_destroy(), call kvmppc_mmu_destroy_pr() at the
beginning of kvmppc_core_vcpu_free_pr(). This is consistent with
kvmppc_mmu_init() being the last call in kvmppc_core_vcpu_create_pr().
For the same reason, if kvmppc_core_vcpu_create_pr() returns an
error then this means that kvmppc_mmu_init() was either not called
or failed, in which case kvmppc_mmu_destroy() should not be called.
Drop the line in the error path of kvm_arch_vcpu_create().
Fixes: f4c8e3b3fb2e ("KVM: PPC: Move kvm_vcpu_init() invocation to common code") Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/158455341029.178873.15248663726399374882.stgit@bahia.lan
Mario Kleiner [Mon, 2 Mar 2020 06:17:32 +0000 (07:17 +0100)]
drm/amd/display: Fix pageflip event race condition for DCN.
Commit 'ee2fc5660b66 ("drm/amd/display: Send vblank and user
events at vsartup for DCN")' introduces a new way of pageflip
completion handling for DCN, and some trouble.
The current implementation introduces a race condition, which
can cause pageflip completion events to be sent out one vblank
too early, thereby confusing userspace and causing flicker:
--> Deadline for surface address regs double-buffering passes on
target pipe.
4. dc_commit_updates_for_stream() MMIO programs the new pageflip
into hw, but too late for current vblank.
=> pflip_status == AMDGPU_FLIP_SUBMITTED, but flip won't complete
in current vblank due to missing the double-buffering deadline
by a tiny bit.
5. VSTARTUP trigger point in vblank is reached, VSTARTUP irq fires,
dm_dcn_crtc_high_irq() gets called.
6. Detects pflip_status == AMDGPU_FLIP_SUBMITTED and assumes the
pageflip has been completed/will complete in this vblank and
sends out pageflip completion event to userspace and resets
pflip_status = AMDGPU_FLIP_NONE.
=> Flip completion event sent out one vblank too early.
This behaviour has been observed during my testing with measurement
hardware a couple of time.
The commit message says that the extra flip event code was added to
dm_dcn_crtc_high_irq() to prevent missing to send out pageflip events
in case the pflip irq doesn't fire, because the "DCH HUBP" component
is clock gated and doesn't fire pflip irqs in that state. Also that
this clock gating may happen if no planes are active. This suggests
that the problem addressed by that commit can't happen if planes
are active.
The proposed solution is therefore to only execute the extra pflip
completion code iff the count of active planes is zero and otherwise
leave pflip completion handling to the pflip irq handler, for a
more race-free experience.
Note that i don't know if this fixes the problem the original commit
tried to address, as i don't know what the test scenario was. It
does fix the observed too early pageflip events though and points
out the problem introduced.
Fixes: ee2fc5660b66 ("drm/amd/display: Send vblank and user events at vsartup for DCN") Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Linus Torvalds [Thu, 19 Mar 2020 19:45:14 +0000 (12:45 -0700)]
Merge tag 'mmc-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- rtsx_pci: Fix support for some various speed modes
- sdhci-of-at91: Fix support for GPIO card detect on SAMA5D2
- sdhci-cadence: Fix support for DDR52 speed mode for eMMC on UniPhier
- sdhci-acpi: Fix broken WP support on Acer Aspire Switch 10
- sdhci-acpi: Workaround FW bug for suspend on Lenovo Miix 320
* tag 'mmc-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: rtsx_pci: Fix support for speed-modes that relies on tuning
mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2
mmc: sdhci-cadence: set SDHCI_QUIRK2_PRESET_VALUE_BROKEN for UniPhier
mmc: sdhci-acpi: Disable write protect detection on Acer Aspire Switch 10 (SW5-012)
mmc: sdhci-acpi: Switch signal voltage back to 3.3V on suspend on external microSD on Lenovo Miix 320
arm64: compat: Fix syscall number of compat_clock_getres
The syscall number of compat_clock_getres was erroneously set to 247
(__NR_io_cancel!) instead of 264. This causes the vDSO fallback of
clock_getres() to land on the wrong syscall for compat tasks.
Linus Torvalds [Thu, 19 Mar 2020 17:19:11 +0000 (10:19 -0700)]
Merge tag '5.6-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small smb3 fixes, two for stable"
* tag '5.6-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: fiemap: do not return EINVAL if get nothing
CIFS: Increment num_remote_opens stats counter even in case of smb2_query_dir_first
cifs: potential unintitliazed error code in cifs_getattr()
Linus Torvalds [Thu, 19 Mar 2020 16:57:48 +0000 (09:57 -0700)]
Merge tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix __uint128_t capability test in Kconfig when GCC that defaults to
32-bit is used to build the 64-bit kernel
- suppress new noisy Clang warnings -Wpointer-to-enum-cast
- move the namespace field in Module.symvers for the backward
compatibility reason for the depmod tool
- use available compression for initramdisk when INTRAMFS_SOURCE is
defined, which was the original behavior
- fix modpost to handle correct large section numbers when it refers to
modversion CRCs and module namespaces
- fix comments and documents
* tag 'kbuild-fixes-v5.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
scripts/kallsyms: fix wrong kallsyms_relative_base
modpost: Get proper section index by get_secindex() instead of st_shndx
initramfs: restore default compression behavior
modpost: move the namespace field in Module.symvers last
kbuild: Disable -Wpointer-to-enum-cast
kbuild: doc: fix references to other documents
int128: fix __uint128_t compiler test in Kconfig
kconfig: introduce m32-flag and m64-flag
kbuild: Fix inconsistent comment
Corentin Labbe [Wed, 18 Mar 2020 15:26:49 +0000 (15:26 +0000)]
rtc: max8907: add missing select REGMAP_IRQ
I have hit the following build error:
armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe':
rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq'
There is the code in the read_symbol function in 'scripts/kallsyms.c':
if (is_ignored_symbol(name, type))
return NULL;
/* Ignore most absolute/undefined (?) symbols. */
if (strcmp(name, "_text") == 0)
_text = addr;
But the is_ignored_symbol function returns true for name="_text" and
type='A'. So the next condition is not executed and the _text variable
is always zero.
It makes the wrong kallsyms_relative_base symbol as a result of the code
(CONFIG_KALLSYMS_BASE_RELATIVE is defined):
if (base_relative) {
output_label("kallsyms_relative_base");
output_address(relative_base);
printf("\n");
}
Because the output_address function uses the _text variable.
So the kallsyms_lookup function and all related functions in the kernel
do not work properly. For example, the stack trace in oops:
This issue happens on binutils <= 2.22
The following commit fixed it:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=d2667025dd30611514810c28bee9709e4623012a
The symbol type of _text is 'T' on binutils >= 2.23
The minimal supported binutils version for the kernel build is 2.21
]
Will Deacon [Wed, 18 Mar 2020 20:38:29 +0000 (20:38 +0000)]
arm64: kpti: Fix "kpti=off" when KASLR is enabled
Enabling KASLR forces the use of non-global page-table entries for kernel
mappings, as this is a decision that we have to make very early on before
mapping the kernel proper. When used in conjunction with the "kpti=off"
command-line option, it is possible to use non-global kernel mappings but
with the kpti trampoline disabled.
Since commit ecee240c1a10 ("arm64: Use a variable to store non-global
mappings decision"), arm64_kernel_unmapped_at_el0() reflects only the use of
non-global mappings and does not take into account whether the kpti
trampoline is enabled. This breaks context switching of the TPIDRRO_EL0
register for 64-bit tasks, where the clearing of the register is deferred to
the ret-to-user code, but it also breaks the ARM SPE PMU driver which
helpfully recommends passing "kpti=off" on the command line!
Report whether or not KPTI is actually enabled in
arm64_kernel_unmapped_at_el0() and check the 'arm64_use_ng_mappings' global
variable directly when determining the protection flags for kernel mappings.
Cc: Mark Brown <broonie@kernel.org> Reported-by: Hongbo Yao <yaohongbo@huawei.com> Tested-by: Hongbo Yao <yaohongbo@huawei.com> Fixes: ecee240c1a10 ("arm64: Use a variable to store non-global mappings decision") Signed-off-by: Will Deacon <will@kernel.org>
Dave Airlie [Thu, 19 Mar 2020 01:47:41 +0000 (11:47 +1000)]
Merge tag 'drm-misc-fixes-2020-03-18-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- drm/lease: fix WARNING in idr_destroy
- Fix AVI frame colorimetry in the dw-hdmi bridge.
- Fix compiler warning in komeda by annotating functions as __maybe_unused.
- Downgrade bochs pci_request_region failure from error to warning to
workaround firmware fb.
Linus Torvalds [Wed, 18 Mar 2020 11:52:21 +0000 (07:52 -0400)]
locks: reinstate locks_delete_block optimization
There is measurable performance impact in some synthetic tests due to
commit ff4f38353bbf (locks: fix a potential use-after-free problem when
wakeup a waiter). Fix the race condition instead by clearing the
fl_blocker pointer after the wake_up, using explicit acquire/release
semantics.
This does mean that we can no longer use the clearing of fl_blocker as
the wait condition, so switch the waiters over to checking whether the
fl_blocked_member list_head is empty.
Reviewed-by: yangerkun <yangerkun@huawei.com> Reviewed-by: NeilBrown <neilb@suse.de> Fixes: ff4f38353bbf (locks: fix a potential use-after-free problem when wakeup a waiter) Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xiao Yang [Wed, 18 Mar 2020 10:34:16 +0000 (18:34 +0800)]
modpost: Get proper section index by get_secindex() instead of st_shndx
(uint16_t) st_shndx is limited to 65535(i.e. SHN_XINDEX) so sym_get_data() gets
wrong section index by st_shndx if requested symbol contains extended section
index that is more than 65535. In this case, we need to get proper section index
by .symtab_shndx section.
Module.symvers generated by building kernel with "-ffunction-sections -fdata-sections"
shows the issue.
Fixes: 9682c4d1eeb7 ("kbuild: modversions: add infrastructure for emitting relative CRCs") Fixes: 8b31164762c6 ("modpost: refactor namespace_from_kstrtabns() to not hard-code section name") Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Linus Torvalds [Tue, 17 Mar 2020 18:04:09 +0000 (11:04 -0700)]
mm: slub: be more careful about the double cmpxchg of freelist
This is just a cleanup addition to Jann's fix to properly update the
transaction ID for the slub slowpath in commit b5e349bc1d64 ("mm: slub:
add missing TID bump..").
The transaction ID is what protects us against any concurrent accesses,
but we should really also make sure to make the 'freelist' comparison
itself always use the same freelist value that we then used as the new
next free pointer.
Jann points out that if we do all of this carefully, we could skip the
transaction ID update for all the paths that only remove entries from
the lists, and only update the TID when adding entries (to avoid the ABA
issue with cmpxchg and list handling re-adding a previously seen value).
But this patch just does the "make sure to cmpxchg the same value we
used" rather than then try to be clever.
Jann Horn [Tue, 17 Mar 2020 00:28:45 +0000 (01:28 +0100)]
mm: slub: add missing TID bump in kmem_cache_alloc_bulk()
When kmem_cache_alloc_bulk() attempts to allocate N objects from a percpu
freelist of length M, and N > M > 0, it will first remove the M elements
from the percpu freelist, then call ___slab_alloc() to allocate the next
element and repopulate the percpu freelist. ___slab_alloc() can re-enable
IRQs via allocate_slab(), so the TID must be bumped before ___slab_alloc()
to properly commit the freelist head change.
Fix it by unconditionally bumping c->tid when entering the slowpath.
Eric Biggers [Mon, 24 Feb 2020 18:20:44 +0000 (10:20 -0800)]
tty: fix compat TIOCGSERIAL checking wrong function ptr
Commit 02a82e1e80ab ("take compat TIOC[SG]SERIAL treatment into
tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start
checking for the presence of the ->set_serial function pointer rather
than ->get_serial. This appears to be a copy-and-paste error, since
->get_serial is the function pointer that is called as well as the
pointer that is checked by the non-compat version of TIOCGSERIAL.
Fix this by checking the correct function pointer.
Commit 02a82e1e80ab ("take compat TIOC[SG]SERIAL treatment into
tty_compat_ioctl()") changed the compat version of TIOCGSERIAL to start
copying a whole 'serial_struct32' to userspace rather than individual
fields, but failed to initialize all padding and fields -- namely the
hole after the 'iomem_reg_shift' field, and the 'reserved' field.
Fix this by initializing the struct to zero.
[v2: use sizeof, and convert the adjacent line for consistency.]
Eric Biggers [Mon, 24 Feb 2020 07:33:59 +0000 (23:33 -0800)]
tty: drop outdated comments about release_tty() locking
The current version of the TTY code unlocks the tty_struct(s) before
release_tty() rather than after. Moreover, tty_unlock_pair() no longer
exists. Thus, remove the outdated comments regarding tty_unlock_pair().
Merge tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of IIO fixes in the 5.6 cycle.
* adxl372
- Fix marking of buffered values as big endian.
* ak8974
- Fix wrong handling of negative values when read from sysfs.
* at91-sama5d2
- Fix differential mode by ensuring configuration set correctly.
* ping
- Use the write sensor type for of_ping_match table.
* sps30
- Kconfig build dependency fix.
* st-sensors
- Fix a wrong identification of which part the SMO8840 ACPI ID indicates.
* stm32-dsfdm
- Fix a sleep in atomic issue by not using a trigger when it makes no sense.
* stm32-timer
- Make sure master mode is disabled when stopping.
* vcnl400
- Update some sampling periods based on new docs.
* tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: ping: set pa_laser_ping_cfg in of_ping_match
iio: chemical: sps30: fix missing triggered buffer dependency
iio: st_sensors: remap SMO8840 to LIS2DH12
iio: light: vcnl4000: update sampling periods for vcnl4040
iio: light: vcnl4000: update sampling periods for vcnl4200
iio: accel: adxl372: Set iio_chan BE
iio: magnetometer: ak8974: Fix negative raw values in sysfs
iio: trigger: stm32-timer: disable master mode when stopping
iio: adc: stm32-dfsdm: fix sleep in atomic context
iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
Cristian Marussi [Wed, 11 Mar 2020 17:12:45 +0000 (17:12 +0000)]
arm64: smp: fix crash_smp_send_stop() behaviour
On a system configured to trigger a crash_kexec() reboot, when only one CPU
is online and another CPU panics while starting-up, crash_smp_send_stop()
will fail to send any STOP message to the other already online core,
resulting in fail to freeze and registers not properly saved.
Moreover even if the proper messages are sent (case CPUs > 2)
it will similarly fail to account for the booting CPU when executing
the final stop wait-loop, so potentially resulting in some CPU not
been waited for shutdown before rebooting.
A tangible effect of this behaviour can be observed when, after a panic
with kexec enabled and loaded, on the following reboot triggered by kexec,
the cpu that could not be successfully stopped fails to come back online:
Make crash_smp_send_stop() account also for the online status of the
calling CPU while evaluating how many CPUs are effectively online: this way
the right number of STOPs is sent and all other stopped-cores's registers
are properly saved.
Fixes: a326195fd330b ("arm64: kdump: implement machine_crash_shutdown()") Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
Cristian Marussi [Wed, 11 Mar 2020 17:12:44 +0000 (17:12 +0000)]
arm64: smp: fix smp_send_stop() behaviour
On a system with only one CPU online, when another one CPU panics while
starting-up, smp_send_stop() will fail to send any STOP message to the
other already online core, resulting in a system still responsive and
alive at the end of the panic procedure.
Make smp_send_stop() account also for the online status of the calling CPU
while evaluating how many CPUs are effectively online: this way, the right
number of STOPs is sent, so enforcing a proper freeze of the system at the
end of panic even under the above conditions.
Fixes: f4d25b8a03438 ("arm64: SMP support") Reported-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Cristian Marussi <cristian.marussi@arm.com> Signed-off-by: Will Deacon <will@kernel.org>
Anthony Mallet [Thu, 12 Mar 2020 13:31:01 +0000 (14:31 +0100)]
USB: cdc-acm: fix rounding error in TIOCSSERIAL
By default, tty_port_init() initializes those parameters to a multiple
of HZ. For instance in line 69 of tty_port.c:
port->close_delay = (50 * HZ) / 100;
https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69
With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04
linux-image-4.15.0-37-generic), the default setting for close_delay is
thus 125.
When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in
user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then
executed with the same setting '12', the value is interpreted as '120'
which is different from the current setting and a EPERM error may be
raised by set_serial_info() if !CAP_SYS_ADMIN.
https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919
Anthony Mallet [Thu, 12 Mar 2020 13:31:00 +0000 (14:31 +0100)]
USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL
close_delay and closing_wait are specified in hundredth of a second but stored
internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies()
functions to convert from each other.
Hans de Goede [Fri, 13 Mar 2020 12:07:08 +0000 (13:07 +0100)]
usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters
We have been receiving bug reports that ethernet connections over
RTL8153 based ethernet adapters stops working after a while with
errors like these showing up in dmesg when the ethernet stops working:
This has been reported on Dell WD15 docks, Belkin USB-C Express Dock 3.1
docks and with generic USB to ethernet dongles using the RTL8153
chipsets. Some users have tried adding usbcore.quirks=0bda:8153:k to
the kernel commandline and all users who have tried this report that
this fixes this.
Also note that we already have an existing NO_LPM quirk for the RTL8153
used in the Microsoft Surface Dock (where it uses a different usb-id).
This commit adds a NO_LPM quirk for the generic Realtek RTL8153
0bda:8153 usb-id, fixing the Tx timeout errors on these devices.
Murphy Zhou [Sat, 14 Mar 2020 03:38:31 +0000 (11:38 +0800)]
CIFS: fiemap: do not return EINVAL if get nothing
If we call fiemap on a truncated file with none blocks allocated,
it makes sense we get nothing from this call. No output means
no blocks have been counted, but the call succeeded. It's a valid
response.
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> CC: Stable <stable@vger.kernel.org>
Shyam Prasad N [Mon, 9 Mar 2020 08:35:09 +0000 (01:35 -0700)]
CIFS: Increment num_remote_opens stats counter even in case of smb2_query_dir_first
The num_remote_opens counter keeps track of the number of open files which must be
maintained by the server at any point. This is a per-tree-connect counter, and the value
of this counter gets displayed in the /proc/fs/cifs/Stats output as a following...
Open files: 0 total (local), 1 open on server
^^^^^^^^^^^^^^^^
As a thumb-rule, we want to increment this counter for each open/create that we
successfully execute on the server. Similarly, we should decrement the counter when
we successfully execute a close.
In this case, an increment was being missed in case of smb2_query_dir_first,
in case of successful open. As a result, we would underflow the counter and we
could even see the counter go to negative after sufficient smb2_query_dir_first calls.
I tested the stats counter for a bunch of filesystem operations with the fix.
And it looks like the counter looks correct to me.
I also check if we missed the increments and decrements elsewhere. It does not
seem so. Few other cases where an open is done and we don't increment the counter are
the compound calls where the corresponding close is also sent in the request.
Signed-off-by: Shyam Prasad N <nspmangalore@gmail.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Dan Carpenter [Fri, 28 Feb 2020 09:22:59 +0000 (12:22 +0300)]
cifs: potential unintitliazed error code in cifs_getattr()
Smatch complains that "rc" could be uninitialized.
fs/cifs/inode.c:2206 cifs_getattr() error: uninitialized symbol 'rc'.
Changing it to "return 0;" improves readability as well.
Fixes: cc1baf98c8f6 ("cifs: do not ignore the SYNC flags in getattr") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Linus Torvalds [Tue, 17 Mar 2020 16:38:03 +0000 (09:38 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- string buffer formatting fixes in picolcd and sensor drivers, from
Takashi Iwai
- two new device IDs from Chen-Tsung Hsieh and Tony Fischetti
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: add ALWAYS_POLL quirk to lenovo pixart mouse
HID: google: add moonball USB id
HID: hid-sensor-custom: Use scnprintf() for avoiding potential buffer overflow
HID: hid-picolcd_fb: Use scnprintf() for avoiding potential buffer overflow
Newer GCC warns about possible truncations of two generated path names as
we're concatenating the configurable sysfs and debugfs path prefixes
with a filename and placing the results in buffers of the same size as
the maximum length of the prefixes.
Newer GCC warns about a possible truncation of a generated sysfs path
name as we're concatenating a directory path with a file name and
placing the result in a buffer that is half the size of the maximum
length of the directory path (which is user controlled).
loopback_test.c: In function 'open_poll_files':
loopback_test.c:651:31: warning: '%s' directive output may be truncated writing up to 511 bytes into a region of size 255 [-Wformat-truncation=]
651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
| ^~
loopback_test.c:651:3: note: 'snprintf' output between 16 and 527 bytes into a destination of size 255
651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by making sure the buffer is large enough the concatenated
strings.
Fixes: 6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback") Fixes: 9250c0ee2626 ("greybus: Loopback_test: use poll instead of inotify") Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20200312110151.22028-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A scripted conversion from userland POLL* to kernel EPOLL* constants
mistakingly replaced the poll flags in the loopback_test tool, which
therefore no longer builds.
Michał Mirosław [Sun, 15 Mar 2020 16:44:25 +0000 (17:44 +0100)]
mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2
SAMA5D2x doesn't drive CMD line if GPIO is used as CD line (at least
SAMA5D27 doesn't). Fix this by forcing card-detect in the module
if module-controlled CD is not used.
Fixed commit addresses the problem only for non-removable cards. This
amends it to also cover gpio-cd case.
On the Acer Aspire Switch 10 (SW5-012) microSD slot always reports the card
being write-protected even though microSD cards do not have a write-protect
switch at all.
Add a new DMI_QUIRK_SD_NO_WRITE_PROTECT quirk which when set sets
the MMC_CAP2_NO_WRITE_PROTECT flag on the controller for the external SD
slot; and add a DMI quirk table entry which selects this quirk for the
Acer SW5-012.
Hans de Goede [Mon, 16 Mar 2020 18:47:52 +0000 (19:47 +0100)]
mmc: sdhci-acpi: Switch signal voltage back to 3.3V on suspend on external microSD on Lenovo Miix 320
Based on a sample of 7 DSDTs from Cherry Trail devices using an AXP288
PMIC depending on the design one of 2 possible LDOs on the PMIC is used
for the MMC signalling voltage, either DLDO3 or GPIO1LDO (GPIO1 pin in
low noise LDO mode).
The Lenovo Miix 320-10ICR uses GPIO1LDO in the SHC1 ACPI device's DSM
methods to set 3.3 or 1.8 signalling voltage and this appears to work
as advertised, so presumably the device is actually using GPIO1LDO for
the external microSD signalling voltage.
But this device has a bug in the _PS0 method of the SHC1 ACPI device,
the DSM remembers the last set signalling voltage and the _PS0 restores
this after a (runtime) suspend-resume cycle, but it "restores" the voltage
on DLDO3 instead of setting it on GPIO1LDO as the DSM method does. DLDO3
is used for the LCD and setting it to 1.8V causes the LCD to go black.
This commit works around this issue by calling the Intel DSM to reset the
signal voltage to 3.3V after the host has been runtime suspended.
This will make the _PS0 method reprogram the DLDO3 voltage to 3.3V, which
leaves it at its original setting fixing the LCD going black.
This commit adds and uses a DMI quirk mechanism to only trigger this
workaround on the Lenovo Miix 320 while leaving the behavior of the
driver unchanged on other devices.
Eugeniy Paltsev [Mon, 16 Mar 2020 11:25:19 +0000 (14:25 +0300)]
initramfs: restore default compression behavior
Even though INITRAMFS_SOURCE kconfig option isn't set in most of
defconfigs it is used (set) extensively by various build systems.
Commit 778e942b1f13 ("initramfs: make initramfs compression choice
non-optional") has changed default compression mode. Previously we
compress initramfs using available compression algorithm. Now
we don't use any compression at all by default.
It significantly increases the image size in case of build system
chooses embedded initramfs. Initially I faced with this issue while
using buildroot.
As of today it's not possible to set preferred compression mode
in target defconfig as this option depends on INITRAMFS_SOURCE
being set. Modification of all build systems either doesn't look
like good option.
Let's instead rewrite initramfs compression mode choices list
the way that "INITRAMFS_COMPRESSION_NONE" will be the last option
in the list. In that case it will be chosen only if all other
options (which implements any compression) are not available.
Jessica Yu [Wed, 11 Mar 2020 17:01:20 +0000 (18:01 +0100)]
modpost: move the namespace field in Module.symvers last
In order to preserve backwards compatability with kmod tools, we have to
move the namespace field in Module.symvers last, as the depmod -e -E
option looks at the first three fields in Module.symvers to check symbol
versions (and it's expected they stay in the original order of crc,
symbol, module).
In addition, update an ancient comment above read_dump() in modpost that
suggested that the export type field in Module.symvers was optional. I
suspect that there were historical reasons behind that comment that are
no longer accurate. We have been unconditionally printing the export
type since 2.6.18 (commit c7fdb7d23db), which is over a decade ago now.
Fix up read_dump() to treat each field as non-optional. I suspect the
original read_dump() code treated the export field as optional in order
to support pre <= 2.6.18 Module.symvers (which did not have the export
type field). Note that although symbol namespaces are optional, the
field will not be omitted from Module.symvers if a symbol does not have
a namespace. In this case, the field will simply be empty and the next
delimiter or end of line will follow.
Cc: stable@vger.kernel.org Fixes: 378b65f4a297 ("modpost: add support for symbol namespaces") Tested-by: Matthias Maennich <maennich@google.com> Reviewed-by: Matthias Maennich <maennich@google.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tony Fischetti [Thu, 12 Mar 2020 16:16:06 +0000 (12:16 -0400)]
HID: add ALWAYS_POLL quirk to lenovo pixart mouse
A lenovo pixart mouse (17ef:608d) is afflicted common the the malfunction
where it disconnects and reconnects every minute--each time incrementing
the device number. This patch adds the device id of the device and
specifies that it needs the HID_QUIRK_ALWAYS_POLL quirk in order to
work properly.
Signed-off-by: Tony Fischetti <tony.fischetti@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Takashi Iwai [Mon, 16 Mar 2020 09:05:05 +0000 (10:05 +0100)]
ALSA: seq: virmidi: Fix running status after receiving sysex
The virmidi driver handles sysex event exceptionally in a short-cut
snd_seq_dump_var_event() call, but this missed the reset of the
running status. As a result, it may lead to an incomplete command
right after the sysex when an event with the same running status was
queued.
Fix it by clearing the running status properly via alling
snd_midi_event_reset_decode() for that code path.
Linus Torvalds [Sun, 15 Mar 2020 20:15:16 +0000 (13:15 -0700)]
Merge tag 'irq-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single commit to handle an erratum in Cavium ThunderX to prevent
access to GIC registers which are broken in the implementation"
* tag 'irq-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Workaround Cavium erratum 38539 when reading GICD_TYPER2
Linus Torvalds [Sun, 15 Mar 2020 19:55:52 +0000 (12:55 -0700)]
Merge tag 'locking-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex fix from Thomas Gleixner:
"Fix for yet another subtle futex issue.
The futex code used ihold() to prevent inodes from vanishing, but
ihold() does not guarantee inode persistence. Replace the inode
pointer with a per boot, machine wide, unique inode identifier.
The second commit fixes the breakage of the hash mechanism which
causes a 100% performance regression"
* tag 'locking-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Unbreak futex hashing
futex: Fix inode life-time issue
Linus Torvalds [Sun, 15 Mar 2020 19:52:56 +0000 (12:52 -0700)]
Merge tag 'x86-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"Two fixes for x86:
- Map EFI runtime service data as encrypted when SEV is enabled.
Otherwise e.g. SMBIOS data cannot be properly decoded by dmidecode.
- Remove the warning in the vector management code which triggered
when a managed interrupt affinity changed outside of a CPU hotplug
operation.
The warning was correct until the recent core code change that
introduced a CPU isolation feature which needs to migrate managed
interrupts away from online CPUs under certain conditions to
achieve the isolation"
* tag 'x86-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vector: Remove warning on managed interrupt migration
x86/ioremap: Map EFI runtime services data as encrypted for SEV
projects / kernel.git / log