igc: Do not enable crosstimestamping for i225-V models
It was reported that when PCIe PTM is enabled, some lockups could
be observed with some integrated i225-V models.
While the issue is investigated, we can disable crosstimestamp for
those models and see no loss of functionality, because those models
don't have any support for time synchronization.
Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Link: https://lore.kernel.org/all/924175a188159f4e03bd69908a91e606b574139b.camel@gmx.de/ Reported-by: Stefan Dietrich <roots@gmx.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
David S. Miller [Tue, 28 Dec 2021 12:42:46 +0000 (12:42 +0000)]
Merge branch 'smc-fixes'
Dust Li says:
====================
net/smc: fix kernel panic caused by race of smc_sock
This patchset fixes the race between smc_release triggered by
close(2) and cdc_handle triggered by underlaying RDMA device.
The race is caused because the smc_connection may been released
before the pending tx CDC messages got its CQEs. In order to fix
this, I add a counter to track how many pending WRs we have posted
through the smc_connection, and only release the smc_connection
after there is no pending WRs on the connection.
The first patch prevents posting WR on a QP that is not in RTS
state. This patch is needed because if we post WR on a QP that
is not in RTS state, ib_post_send() may success but no CQE will
return, and that will confuse the counter tracking the pending
WRs.
The second patch add a counter to track how many WRs were posted
through the smc_connection, and don't reset the QP on link destroying
to prevent leak of the counter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Though smc_cdc_tx_handler() checked the existence of smc connection,
smc_release() may have already dismissed and released the smc socket
before smc_cdc_tx_handler() further visits it.
smc_cdc_tx_handler() |smc_release()
if (!conn) |
|
|smc_cdc_tx_dismiss_slots()
| smc_cdc_tx_dismisser()
|
|sock_put(&smc->sk) <- last sock_put,
| smc_sock freed
bh_lock_sock(&smc->sk) (panic) |
To make sure we won't receive any CDC messages after we free the
smc_sock, add a refcount on the smc_connection for inflight CDC
message(posted to the QP but haven't received related CQE), and
don't release the smc_connection until all the inflight CDC messages
haven been done, for both success or failed ones.
Using refcount on CDC messages brings another problem: when the link
is going to be destroyed, smcr_link_clear() will reset the QP, which
then remove all the pending CQEs related to the QP in the CQ. To make
sure all the CQEs will always come back so the refcount on the
smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced
by smc_ib_modify_qp_error().
And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we
need to wait for all pending WQEs done, or we may encounter use-after-
free when handling CQEs.
For IB device removal routine, we need to wait for all the QPs on that
device been destroyed before we can destroy CQs on the device, or
the refcount on smc_connection won't reach 0 and smc_sock cannot be
released.
Fixes: 5f08318f617b ("smc: connection data control (CDC)") Reported-by: Wen Gu <guwen@linux.alibaba.com> Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dust Li [Tue, 28 Dec 2021 09:03:24 +0000 (17:03 +0800)]
net/smc: don't send CDC/LLC message if link not ready
We found smc_llc_send_link_delete_all() sometimes wait
for 2s timeout when testing with RDMA link up/down.
It is possible when a smc_link is in ACTIVATING state,
the underlaying QP is still in RESET or RTR state, which
cannot send any messages out.
smc_llc_send_link_delete_all() use smc_link_usable() to
checks whether the link is usable, if the QP is still in
RESET or RTR state, but the smc_link is in ACTIVATING, this
LLC message will always fail without any CQE entering the
CQ, and we will always wait 2s before timeout.
Since we cannot send any messages through the QP before
the QP enter RTS. I add a wrapper smc_link_sendable()
which checks the state of QP along with the link state.
And replace smc_link_usable() with smc_link_sendable()
in all LLC & CDC message sending routine.
Fixes: 5f08318f617b ("smc: connection data control (CDC)") Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fix it by freeing 'pending_skb' in error and remove.
Fixes: 68957303f44a ("NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC Chip") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: lantiq_xrx200: fix statistics of received bytes
Received frames have FCS truncated. There is no need
to subtract FCS length from the statistics.
Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
net: ag71xx: Fix a potential double free in error handling paths
'ndev' is a managed resource allocated with devm_alloc_etherdev(), so there
is no need to call free_netdev() explicitly or there will be a double
free().
Simplify all error handling paths accordingly.
Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
wolfgang huang [Tue, 28 Dec 2021 08:01:20 +0000 (16:01 +0800)]
mISDN: change function names to avoid conflicts
As we build for mips, we meet following error. l1_init error with
multiple definition. Some architecture devices usually marked with
l1, l2, lxx as the start-up phase. so we change the mISDN function
names, align with Isdnl2_xxx.
mips-linux-gnu-ld: drivers/isdn/mISDN/layer1.o: in function `l1_init':
(.text+0x890): multiple definition of `l1_init'; \
arch/mips/kernel/bmips_5xxx_init.o:(.text+0xf0): first defined here
make[1]: *** [home/mips/kernel-build/linux/Makefile:1161: vmlinux] Error 1
Signed-off-by: wolfgang huang <huangjinhui@kylinos.cn> Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
nfc: uapi: use kernel size_t to fix user-space builds
Fix user-space builds if it includes /usr/include/linux/nfc.h before
some of other headers:
/usr/include/linux/nfc.h:281:9: error: unknown type name ‘size_t’
281 | size_t service_name_len;
| ^~~~~~
Fixes: d646960f7986 ("NFC: Initial LLCP support") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Replace sa_family_t with __kernel_sa_family_t to fix the following
linux/nfc.h userspace compilation errors:
/usr/include/linux/nfc.h:266:2: error: unknown type name 'sa_family_t'
sa_family_t sa_family;
/usr/include/linux/nfc.h:274:2: error: unknown type name 'sa_family_t'
sa_family_t sa_family;
Fixes: 23b7869c0fd0 ("NFC: add the NFC socket raw protocol") Fixes: d646960f7986 ("NFC: Initial LLCP support") Cc: <stable@vger.kernel.org> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: usb: pegasus: Do not drop long Ethernet frames
The D-Link DSB-650TX (2001:4002) is unable to receive Ethernet frames
that are longer than 1518 octets, for example, Ethernet frames that
contain 802.1Q VLAN tags.
The frames are sent to the pegasus driver via USB but the driver
discards them because they have the Long_pkt field set to 1 in the
received status report. The function read_bulk_callback of the pegasus
driver treats such received "packets" (in the terminology of the
hardware) as errors but the field simply does just indicate that the
Ethernet frame (MAC destination to FCS) is longer than 1518 octets.
It seems that in the 1990s there was a distinction between
"giant" (> 1518) and "runt" (< 64) frames and the hardware includes
flags to indicate this distinction. It seems that the purpose of the
distinction "giant" frames was to not allow infinitely long frames due
to transmission errors and to allow hardware to have an upper limit of
the frame size. However, the hardware already has such limit with its
2048 octet receive buffer and, therefore, Long_pkt is merely a
convention and should not be treated as a receive error.
Actually, the hardware is even able to receive Ethernet frames with 2048
octets which exceeds the claimed limit frame size limit of the driver of
1536 octets (PEGASUS_MTU).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Matthias-Christian Ott <ott@mirix.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Karsten Graul [Mon, 27 Dec 2021 13:35:30 +0000 (14:35 +0100)]
net/smc: fix using of uninitialized completions
In smc_wr_tx_send_wait() the completion on index specified by
pend->idx is initialized and after smc_wr_tx_send() was called the wait
for completion starts. pend->idx is used to get the correct index for
the wait, but the pend structure could already be cleared in
smc_wr_tx_process_cqe().
Introduce pnd_idx to hold and use a local copy of the correct index.
Fixes: 09c61d24f96d ("net/smc: wait for departure of an IB message") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
William Zhao [Thu, 23 Dec 2021 17:33:16 +0000 (12:33 -0500)]
ip6_vti: initialize __ip6_tnl_parm struct in vti6_siocdevprivate
The "__ip6_tnl_parm" struct was left uninitialized causing an invalid
load of random data when the "__ip6_tnl_parm" struct was used elsewhere.
As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access
the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and
containing random data, the UBSAN detected that "collect_md" held a
non-boolean value.
The UBSAN issue is as follows:
===============================================================
UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14
load of value 30 is not a valid value for type '_Bool'
CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x57
ubsan_epilogue+0x5/0x40
__ubsan_handle_load_invalid_value+0x66/0x70
? __cpuhp_setup_state+0x1d3/0x210
ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel]
vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? vti6_rcv+0x100/0x100 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? rcu_read_lock_bh_held+0xc0/0xc0
? lock_acquired+0x262/0xb10
dev_hard_start_xmit+0x1e6/0x820
__dev_queue_xmit+0x2079/0x3340
? mark_lock.part.52+0xf7/0x1050
? netdev_core_pick_tx+0x290/0x290
? kvm_clock_read+0x14/0x30
? kvm_sched_clock_read+0x5/0x10
? sched_clock_cpu+0x15/0x200
? find_held_lock+0x3a/0x1c0
? lock_release+0x42f/0xc90
? lock_downgrade+0x6b0/0x6b0
? mark_held_locks+0xb7/0x120
? neigh_connected_output+0x31f/0x470
? lockdep_hardirqs_on+0x79/0x100
? neigh_connected_output+0x31f/0x470
? ip6_finish_output2+0x9b0/0x1d90
? rcu_read_lock_bh_held+0x62/0xc0
? ip6_finish_output2+0x9b0/0x1d90
ip6_finish_output2+0x9b0/0x1d90
? ip6_append_data+0x330/0x330
? ip6_mtu+0x166/0x370
? __ip6_finish_output+0x1ad/0xfb0
? nf_hook_slow+0xa6/0x170
ip6_output+0x1fb/0x710
? nf_hook.constprop.32+0x317/0x430
? ip6_finish_output+0x180/0x180
? __ip6_finish_output+0xfb0/0xfb0
? lock_is_held_type+0xd9/0x130
ndisc_send_skb+0xb33/0x1590
? __sk_mem_raise_allocated+0x11cf/0x1560
? dst_output+0x4a0/0x4a0
? ndisc_send_rs+0x432/0x610
addrconf_dad_completed+0x30c/0xbb0
? addrconf_rs_timer+0x650/0x650
? addrconf_dad_work+0x73c/0x10e0
addrconf_dad_work+0x73c/0x10e0
? addrconf_dad_completed+0xbb0/0xbb0
? rcu_read_lock_sched_held+0xaf/0xe0
? rcu_read_lock_bh_held+0xc0/0xc0
process_one_work+0x97b/0x1740
? pwq_dec_nr_in_flight+0x270/0x270
worker_thread+0x87/0xbf0
? process_one_work+0x1740/0x1740
kthread+0x3ac/0x490
? set_kthread_struct+0x100/0x100
ret_from_fork+0x22/0x30
</TASK>
===============================================================
The solution is to initialize "__ip6_tnl_parm" struct to zeros in the
"vti6_siocdevprivate()" function.
Signed-off-by: William Zhao <wizhao@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ma Xinjian [Fri, 24 Dec 2021 09:59:28 +0000 (17:59 +0800)]
selftests: mptcp: Remove the deprecated config NFT_COUNTER
NFT_COUNTER was removed since 390ad4295aa ("netfilter: nf_tables: make counter support built-in")
LKP/0Day will check if all configs listing under selftests are able to
be enabled properly.
For the missing configs, it will report something like:
LKP WARN miss config CONFIG_NFT_COUNTER= of net/mptcp/config
- it's not reasonable to keep the deprecated configs.
- configs under kselftests are recommended by corresponding tests.
So if some configs are missing, it will impact the testing results
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Ma Xinjian <xinjianx.ma@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This issue occurs when asoc is peeled off and the old sk is freed after
getting it by asoc->base.sk and before calling lock_sock(sk).
To prevent the sk free, as a holder of the sk, ep should be alive when
calling lock_sock(). This patch uses call_rcu() and moves sock_put and
ep free into sctp_endpoint_destroy_rcu(), so that it's safe to try to
hold the ep under rcu_read_lock in sctp_transport_traverse_process().
If sctp_endpoint_hold() returns true, it means this ep is still alive
and we have held it and can continue to dump it; If it returns false,
it means this ep is dead and can be freed after rcu_read_unlock, and
we should skip it.
In sctp_sock_dump(), after locking the sk, if this ep is different from
tsp->asoc->ep, it means during this dumping, this asoc was peeled off
before calling lock_sock(), and the sk should be skipped; If this ep is
the same with tsp->asoc->ep, it means no peeloff happens on this asoc,
and due to lock_sock, no peeloff will happen either until release_sock.
Note that delaying endpoint free won't delay the port release, as the
port release happens in sctp_endpoint_destroy() before calling call_rcu().
Also, freeing endpoint by call_rcu() makes it safe to access the sk by
asoc->base.sk in sctp_assocs_seq_show() and sctp_rcv().
Thanks Jones to bring this issue up.
v1->v2:
- improve the changelog.
- add kfree(ep) into sctp_endpoint_destroy_rcu(), as Jakub noticed.
Reported-by: syzbot+9276d76e83e3bcde6c99@syzkaller.appspotmail.com Reported-by: Lee Jones <lee.jones@linaro.org> Fixes: d25adbeb0cdb ("sctp: fix an use-after-free issue in sctp_sock_dump") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Coco Li [Thu, 23 Dec 2021 22:24:41 +0000 (22:24 +0000)]
selftests: Calculate udpgso segment count without header adjustment
The below referenced commit correctly updated the computation of number
of segments (gso_size) by using only the gso payload size and
removing the header lengths.
With this change the regression test started failing. Update
the tests to match this new behavior.
Both IPv4 and IPv6 tests are updated, as a separate patch in this series
will update udp_v6_send_skb to match this change in udp_send_skb.
Fixes: 158390e45612 ("udp: using datalen to cap max gso segments") Signed-off-by: Coco Li <lixiaoyan@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20211223222441.2975883-2-lixiaoyan@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Coco Li [Thu, 23 Dec 2021 22:24:40 +0000 (22:24 +0000)]
udp: using datalen to cap ipv6 udp max gso segments
The max number of UDP gso segments is intended to cap to
UDP_MAX_SEGMENTS, this is checked in udp_send_skb().
skb->len contains network and transport header len here, we should use
only data len instead.
This is the ipv6 counterpart to the below referenced commit,
which missed the ipv6 change
Fixes: 158390e45612 ("udp: using datalen to cap max gso segments") Signed-off-by: Coco Li <lixiaoyan@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20211223222441.2975883-1-lixiaoyan@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 24 Dec 2021 03:04:32 +0000 (19:04 -0800)]
Merge tag 'mlx5-fixes-2021-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-12-22
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2021-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'
net/mlx5e: Delete forward rule for ct or sample action
net/mlx5e: Fix ICOSQ recovery flow for XSK
net/mlx5e: Fix interoperability between XSK and ICOSQ recovery flow
net/mlx5e: Fix skb memory leak when TC classifier action offloads are disabled
net/mlx5e: Wrap the tx reporter dump callback to extract the sq
net/mlx5: Fix tc max supported prio for nic mode
net/mlx5: Fix SF health recovery flow
net/mlx5: Fix error print in case of IRQ request failed
net/mlx5: Use first online CPU instead of hard coded CPU
net/mlx5: DR, Fix querying eswitch manager vport for ECPF
net/mlx5: DR, Fix NULL vs IS_ERR checking in dr_domain_init_resources
====================
Linus Torvalds [Thu, 23 Dec 2021 23:43:25 +0000 (15:43 -0800)]
Merge tag 'drm-fixes-2021-12-24' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Happy Xmas. Nothing major, one mediatek and a couple of i915 locking
fixes. There might be a few stragglers over next week or so but I
don't expect much before next release.
mediatek:
- NULL pointer check
i915:
- guc submission locking fixes"
* tag 'drm-fixes-2021-12-24' of git://anongit.freedesktop.org/drm/drm:
drm/i915/guc: Only assign guc_id.id when stealing guc_id
drm/i915/guc: Use correct context lock when callig clr_context_registered
drm/mediatek: hdmi: Perform NULL pointer check for mtk_hdmi_conf
- ice: xsk: do not clear status_error0 for ntu + nb_buffs descriptor,
avoid stalls when multiple sockets use an interface
Previous releases - always broken:
- inet: fully convert sk->sk_rx_dst to RCU rules
- veth: ensure skb entering GRO are not cloned
- sched: fix zone matching for invalid conntrack state
- bonding: fix ad_actor_system option setting to default
- nf_tables: fix use-after-free in nft_set_catchall_destroy()
- lantiq_xrx200: increase buffer reservation to avoid mem corruption
- ice: xsk: avoid leaking app buffers during clean up
- tun: avoid double free in tun_free_netdev"
* tag 'net-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
net: stmmac: dwmac-visconti: Fix value of ETHER_CLK_SEL_FREQ_SEL_2P5M
r8152: sync ocp base
r8152: fix the force speed doesn't work for RTL8156
net: bridge: fix ioctl old_deviceless bridge argument
net: stmmac: ptp: fix potentially overflowing expression
net: dsa: tag_ocelot: use traffic class to map priority on injected header
veth: ensure skb entering GRO are not cloned.
asix: fix wrong return value in asix_check_host_enable()
asix: fix uninit-value in asix_mdio_read()
sfc: falcon: Check null pointer of rx_queue->page_ring
sfc: Check null pointer of rx_queue->page_ring
net: ks8851: Check for error irq
drivers: net: smc911x: Check for error irq
fjes: Check for error irq
bonding: fix ad_actor_system option setting to default
igb: fix deadlock caused by taking RTNL in RPM resume path
gve: Correct order of processing device options
net: skip virtio_net_hdr_set_proto if protocol already set
net: accept UFOv6 packages in virtio_net_hdr_to_skb
docs: networking: replace skb_hwtstamp_tx with skb_tstamp_tx
...
Hayes Wang [Thu, 23 Dec 2021 09:27:02 +0000 (17:27 +0800)]
r8152: sync ocp base
There are some chances that the actual base of hardware is different
from the value recorded by driver, so we have to reset the variable
of ocp_base to sync it.
Set ocp_base to -1. Then, it would be updated and the new base would be
set to the hardware next time.
Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 23 Dec 2021 17:55:58 +0000 (09:55 -0800)]
Merge tag 'sound-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Quite a few small fixes, hopefully the last batch for 5.16.
Most of them are device-specific quirks and/or fixes, and nothing
looks scary for the late stage"
* tag 'sound-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Fix quirk for Clevo NJ51CU
ALSA: rawmidi - fix the uninitalized user_pversion
ALSA: hda: intel-sdw-acpi: go through HDAS ACPI at max depth of 2
ALSA: hda: intel-sdw-acpi: harden detection of controller
ALSA: hda/hdmi: Disable silent stream on GLK
ALSA: hda/realtek: fix mute/micmute LEDs for a HP ProBook
ASoC: meson: aiu: Move AIU_I2S_MISC hold setting to aiu-fifo-i2s
ASoC: meson: aiu: fifo: Add missing dma_coerce_mask_and_coherent()
ASoC: tas2770: Fix setting of high sample rates
ASoC: rt5682: fix the wrong jack type detected
ALSA: hda/realtek: Add new alc285-hp-amp-init model
ALSA: hda/realtek: Amp init fixup for HP ZBook 15 G6
ASoC: tegra: Restore headphones jack name on Nyan Big
ASoC: tegra: Add DAPM switches for headphones and mic jack
ALSA: jack: Check the return value of kstrdup()
ALSA: drivers: opl3: Fix incorrect use of vp->state
ASoC: SOF: Intel: pci-tgl: add new ADL-P variant
ASoC: SOF: Intel: pci-tgl: add ADL-N support
Commit 561d8352818f ("bridge: use ndo_siocdevprivate") changed the
source and destination arguments of copy_{to,from}_user in bridge's
old_deviceless() from args[1] to uarg breaking SIOC{G,S}IFBR ioctls.
Commit cbd7ad29a507 ("net: bridge: fix ioctl old_deviceless bridge
argument") fixed only BRCTL_{ADD,DEL}_BRIDGES commands leaving
BRCTL_GET_BRIDGES one untouched.
The fixes BRCTL_GET_BRIDGES as well and has been tested with busybox's
brctl.
Example of broken brctl:
$ brctl show
bridge name bridge id STP enabled interfaces
brctl: can't get bridge name for index 0: No such device or address
Example of fixed brctl:
$ brctl show
bridge name bridge id STP enabled interfaces
br0 8000.000000000000 no
Fixes: 561d8352818f ("bridge: use ndo_siocdevprivate") Signed-off-by: Remi Pommarel <repk@triplefau.lt> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/all/20211223153139.7661-2-repk@triplefau.lt/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xiaoliang Yang [Thu, 23 Dec 2021 07:22:11 +0000 (15:22 +0800)]
net: dsa: tag_ocelot: use traffic class to map priority on injected header
For Ocelot switches, the CPU injected frames have an injection header
where it can specify the QoS class of the packet and the DSA tag, now it
uses the SKB priority to set that. If a traffic class to priority
mapping is configured on the netdevice (with mqprio for example ...), it
won't be considered for CPU injected headers. This patch make the QoS
class aligned to the priority to traffic class mapping if it exists.
Fixes: 8dce89aa5f32 ("net: dsa: ocelot: add tagger for Ocelot/Felix switches") Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Marouen Ghodhbane <marouen.ghodhbane@nxp.com> Link: https://lore.kernel.org/r/20211223072211.33130-1-xiaoliang.yang_1@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 23 Dec 2021 17:44:29 +0000 (09:44 -0800)]
Merge tag 'gpio-fixes-for-v5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix interrupts when replugging the device in gpio-dln2
- remove the arbitrary timeout on virtio requests from gpio-virtio
* tag 'gpio-fixes-for-v5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: virtio: remove timeout
gpio: dln2: Fix interrupts when replugging the device
Paolo Abeni [Wed, 22 Dec 2021 18:39:52 +0000 (19:39 +0100)]
veth: ensure skb entering GRO are not cloned.
After commit d3256efd8e8b ("veth: allow enabling NAPI even without XDP"),
if GRO is enabled on a veth device and TSO is disabled on the peer
device, TCP skbs will go through the NAPI callback. If there is no XDP
program attached, the veth code does not perform any share check, and
shared/cloned skbs could enter the GRO engine.
Ignat reported a BUG triggered later-on due to the above condition:
Linus Torvalds [Thu, 23 Dec 2021 17:37:59 +0000 (09:37 -0800)]
Merge tag 'mmc-v5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Disable card detect during shutdown
MMC host:
- mmci: Fixup tuning support for stm32_sdmmc
- meson-mx-sdhc: Fix support for multi-block SDIO commands
- sdhci-tegra: Fix support for eMMC HS400ES mode"
* tag 'mmc-v5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: mmci: stm32: clear DLYB_CR after sending tuning command
mmc: meson-mx-sdhc: Set MANUAL_STOP for multi-block SDIO commands
mmc: core: Disable card detect during shutdown
mmc: sdhci-tegra: Fix switch to HS400ES mode
Linus Torvalds [Thu, 23 Dec 2021 17:22:34 +0000 (09:22 -0800)]
Merge tag 'arm-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is my last set of fixes for 5.16, including
- multiple code fixes for the op-tee firmware driver
- Two patches for allwinner SoCs, one fixing the phy mode on a board,
the other one fixing a driver bug in the "RSB" bus driver. This was
originally targeted for 5.17, but seemed worth moving to 5.16
- Two small fixes for devicetree files on i.MX platforms, resolving
problems with ethernet and i2c"
* tag 'arm-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
optee: Suppress false positive kmemleak report in optee_handle_rpc()
tee: optee: Fix incorrect page free bug
arm64: dts: lx2160a: fix scl-gpios property name
tee: handle lookup of shm with reference count 0
ARM: dts: imx6qdl-wandboard: Fix Ethernet support
bus: sunxi-rsb: Fix shutdown
arm64: dts: allwinner: orangepi-zero-plus: fix PHY mode
Chris Mi [Thu, 2 Dec 2021 03:18:02 +0000 (11:18 +0800)]
net/mlx5e: Delete forward rule for ct or sample action
When there is ct or sample action, the ct or sample rule will be deleted
and return. But if there is an extra mirror action, the forward rule can't
be deleted because of the return.
Fix it by removing the return.
Fixes: 69e2916ebce4 ("net/mlx5: CT: Add support for mirroring") Fixes: f94d6389f6a8 ("net/mlx5e: TC, Add support to offload sample action") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
There are two ICOSQs per channel: one is needed for RX, and the other
for async operations (XSK TX, kTLS offload). Currently, the recovery
flow for both is the same, and async ICOSQ is mistakenly treated like
the regular ICOSQ.
This patch prevents running the regular ICOSQ recovery on async ICOSQ.
The purpose of async ICOSQ is to handle XSK wakeup requests and post
kTLS offload RX parameters, it has nothing to do with RQ and XSKRQ UMRs,
so the regular recovery sequence is not applicable here.
Fixes: be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
net/mlx5e: Fix interoperability between XSK and ICOSQ recovery flow
Both regular RQ and XSKRQ use the same ICOSQ for UMRs. When doing
recovery for the ICOSQ, don't forget to deactivate XSKRQ.
XSK can be opened and closed while channels are active, so a new mutex
prevents the ICOSQ recovery from running at the same time. The ICOSQ
recovery deactivates and reactivates XSKRQ, so any parallel change in
XSK state would break consistency. As the regular RQ is running, it's
not enough to just flush the recovery work, because it can be
rescheduled.
Fixes: be5323c8379f ("net/mlx5e: Report and recover from CQE error on ICOSQ") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Gal Pressman [Mon, 13 Dec 2021 09:05:11 +0000 (11:05 +0200)]
net/mlx5e: Fix skb memory leak when TC classifier action offloads are disabled
When TC classifier action offloads are disabled (CONFIG_MLX5_CLS_ACT in
Kconfig), the mlx5e_rep_tc_receive() function which is responsible for
passing the skb to the stack (or freeing it) is defined as a nop, and
results in leaking the skb memory. Replace the nop with a call to
napi_gro_receive() to resolve the leak.
Amir Tzin [Tue, 30 Nov 2021 14:05:44 +0000 (16:05 +0200)]
net/mlx5e: Wrap the tx reporter dump callback to extract the sq
Function mlx5e_tx_reporter_dump_sq() casts its void * argument to struct
mlx5e_txqsq *, but in TX-timeout-recovery flow the argument is actually
of type struct mlx5e_tx_timeout_ctx *.
mlx5_core 0000:08:00.1 enp8s0f1: TX timeout detected
mlx5_core 0000:08:00.1 enp8s0f1: TX timeout on queue: 1, SQ: 0x11ec, CQ: 0x146d, SQ Cons: 0x0 SQ Prod: 0x1, usecs since last trans: 21565000
BUG: stack guard page was hit at 0000000093f1a2de (stack is 00000000b66ea0dc..000000004d932dae)
kernel stack overflow (page fault): 0000 [#1] SMP NOPTI
CPU: 5 PID: 95 Comm: kworker/u20:1 Tainted: G W OE 5.13.0_mlnx #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5e mlx5e_tx_timeout_work [mlx5_core]
RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180
[mlx5_core]
Call Trace:
mlx5e_tx_reporter_dump+0x43/0x1c0 [mlx5_core]
devlink_health_do_dump.part.91+0x71/0xd0
devlink_health_report+0x157/0x1b0
mlx5e_reporter_tx_timeout+0xb9/0xf0 [mlx5_core]
? mlx5e_tx_reporter_err_cqe_recover+0x1d0/0x1d0
[mlx5_core]
? mlx5e_health_queue_dump+0xd0/0xd0 [mlx5_core]
? update_load_avg+0x19b/0x550
? set_next_entity+0x72/0x80
? pick_next_task_fair+0x227/0x340
? finish_task_switch+0xa2/0x280
mlx5e_tx_timeout_work+0x83/0xb0 [mlx5_core]
process_one_work+0x1de/0x3a0
worker_thread+0x2d/0x3c0
? process_one_work+0x3a0/0x3a0
kthread+0x115/0x130
? kthread_park+0x90/0x90
ret_from_fork+0x1f/0x30
--[ end trace 51ccabea504edaff ]---
RIP: 0010:mlx5e_tx_reporter_dump_sq+0xd3/0x180
PKRU: 55555554
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
end Kernel panic - not syncing: Fatal exception
To fix this bug add a wrapper for mlx5e_tx_reporter_dump_sq() which
extracts the sq from struct mlx5e_tx_timeout_ctx and set it as the
TX-timeout-recovery flow dump callback.
Fixes: 5f29458b77d5 ("net/mlx5e: Support dump callback in TX reporter") Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Amir Tzin <amirtz@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Chris Mi [Tue, 14 Dec 2021 01:52:53 +0000 (03:52 +0200)]
net/mlx5: Fix tc max supported prio for nic mode
Only prio 1 is supported if firmware doesn't support ignore flow
level for nic mode. The offending commit removed the check wrongly.
Add it back.
Fixes: 9a99c8f1253a ("net/mlx5e: E-Switch, Offload all chain 0 priorities when modify header and forward action is not supported") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Shay Drory [Wed, 24 Nov 2021 21:10:57 +0000 (23:10 +0200)]
net/mlx5: Fix error print in case of IRQ request failed
In case IRQ layer failed to find or to request irq, the driver is
printing the first cpu of the provided affinity as part of the error
print. Empty affinity is a valid input for the IRQ layer, and it is
an error to call cpumask_first() on empty affinity.
Remove the first cpu print from the error message.
net/mlx5: DR, Fix querying eswitch manager vport for ECPF
On BlueField the E-Switch manager is the ECPF (vport 0xFFFE), but when
querying capabilities of ECPF eswitch manager, need to query vport 0
with other_vport = 0.
Jens Axboe [Thu, 23 Dec 2021 03:26:56 +0000 (20:26 -0700)]
io_uring: zero iocb->ki_pos for stream file types
io_uring supports using offset == -1 for using the current file position,
and we read that in as part of read/write command setup. For the non-iter
read/write types we pass in NULL for the position pointer, but for the
iter types we should not be passing any anything but 0 for the position
for a stream.
Clear kiocb->ki_pos if the file is a stream, don't leave it as -1. If we
do, then the request will error with -ESPIPE.
Fixes: ba04291eb66e ("io_uring: allow use of offset == -1 to mean file position") Link: https://github.com/axboe/liburing/discussions/501 Reported-by: Samuel Williams <samuel.williams@oriontransfer.co.nz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Skripkin [Tue, 21 Dec 2021 20:10:43 +0000 (23:10 +0300)]
asix: fix wrong return value in asix_check_host_enable()
If asix_read_cmd() returns 0 on 30th interation, 0 will be returned from
asix_check_host_enable(), which is logically wrong. Fix it by returning
-ETIMEDOUT explicitly if we have exceeded 30 iterations
Also, replaced 30 with #define as suggested by Andrew
Jiasheng Jiang [Mon, 20 Dec 2021 14:03:44 +0000 (22:03 +0800)]
sfc: falcon: Check null pointer of rx_queue->page_ring
Because of the possible failure of the kcalloc, it should be better to
set rx_queue->page_ptr_mask to 0 when it happens in order to maintain
the consistency.
Fixes: 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20211220140344.978408-1-jiasheng@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jiasheng Jiang [Mon, 20 Dec 2021 13:56:03 +0000 (21:56 +0800)]
sfc: Check null pointer of rx_queue->page_ring
Because of the possible failure of the kcalloc, it should be better to
set rx_queue->page_ptr_mask to 0 when it happens in order to maintain
the consistency.
Fixes: 5a6681e22c14 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20211220135603.954944-1-jiasheng@iscas.ac.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 22 Dec 2021 19:39:53 +0000 (11:39 -0800)]
Merge tag 'fixes-2021-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix memblock_phys_alloc() section mismatch error
There are section mismatch errors when compiler refuses to inline
one-line wrapper memblock_phys_alloc(). Make memblock_phys_alloc()
__always_inline to avoid these mismatch issues"
* tag 'fixes-2021-12-22' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix memblock_phys_alloc() section mismatch error
Werner Sembach [Wed, 15 Dec 2021 19:16:46 +0000 (20:16 +0100)]
ALSA: hda/realtek: Fix quirk for Clevo NJ51CU
The Clevo NJ51CU comes either with the ALC293 or the ALC256 codec, but uses
the 0x8686 subproduct id in both cases. The ALC256 codec needs a different
quirk for the headset microphone working and and edditional quirk for sound
working after suspend and resume.
When waking up from s3 suspend the Coef 0x10 is set to 0x0220 instead of
0x0020 on the ALC256 codec. Setting the value manually makes the sound
work again. This patch does this automatically.
[ minor coding style fix by tiwai ]
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Fixes: b5acfe152abaa ("ALSA: hda/realtek: Add some Clove SSID in the ALC293(ALC1220)") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211215191646.844644-1-wse@tuxedocomputers.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jaroslav Kysela [Sat, 18 Dec 2021 12:39:25 +0000 (13:39 +0100)]
ALSA: rawmidi - fix the uninitalized user_pversion
The user_pversion was uninitialized for the user space file structure
in the open function, because the file private structure use
kmalloc for the allocation.
The kernel ALSA sequencer code clears the file structure, so no additional
fixes are required.
Libin Yang [Tue, 21 Dec 2021 01:08:17 +0000 (09:08 +0800)]
ALSA: hda: intel-sdw-acpi: go through HDAS ACPI at max depth of 2
In the HDAS ACPI scope, the SoundWire may not be the direct child of HDAS.
It needs to go through the ACPI table at max depth of 2 to find the
SoundWire device from HDAS.
Libin Yang [Tue, 21 Dec 2021 01:08:16 +0000 (09:08 +0800)]
ALSA: hda: intel-sdw-acpi: harden detection of controller
The existing code currently sets a pointer to an ACPI handle before
checking that it's actually a SoundWire controller. This can lead to
issues where the graph walk continues and eventually fails, but the
pointer was set already.
This patch changes the logic so that the information provided to
the caller is set when a controller is found.
Ville Syrjälä [Wed, 22 Dec 2021 14:53:50 +0000 (16:53 +0200)]
ALSA: hda/hdmi: Disable silent stream on GLK
The silent stream stuff recurses back into i915 audio
component .get_power() from the .pin_eld_notify() hook.
On GLK this will deadlock as i915 may already be holding
the relevant modeset locks during .pin_eld_notify() and
the GLK audio vs. CDCLK workaround will try to grab the
same locks from .get_power().
Until someone comes up with a better fix just disable the
silent stream support on GLK.
Linus Torvalds [Wed, 22 Dec 2021 18:17:16 +0000 (10:17 -0800)]
Merge tag 'for-5.16/parisc-7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Fix a bug in the C code which calculates the relevant futex spinlock
based on the futex virtual address. In some cases a wrong spinlock
(compared to what is calculated in the assembly code path) was
choosen which then can lead to deadlocks.
- The 64-bit kernel missed to clip the LWS number in the
Light-weight-syscall path for 32-bit processes.
- Prevent CPU register dump to show stale value in IIR register on
access rights traps.
- Remove unused ARCH_DEFCONFIG entries.
* tag 'for-5.16/parisc-7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: remove ARCH_DEFCONFIG
parisc: Fix mask used to select futex spinlock
parisc: Correct completer in lws start
parisc: Clear stale IIR value on instruction access rights trap
Linus Torvalds [Wed, 22 Dec 2021 18:11:17 +0000 (10:11 -0800)]
Merge tag 'for-linus-5.16-3' of git://github.com/cminyard/linux-ipmi
Pull IPMI fixes from Corey Minyard:
"Fix some IPMI crashes
Some crash fixes have come in dealing with various error handling
issues. They have sat in next for 5 days or more without issue, and
they are fairly critical"
* tag 'for-linus-5.16-3' of git://github.com/cminyard/linux-ipmi:
ipmi: Fix UAF when uninstall ipmi_si and ipmi_msghandler module
ipmi: fix initialization when workqueue allocation fails
ipmi: bail out if init_srcu_struct fails
ipmi: ssif: initialize ssif_info->client early
Linus Torvalds [Wed, 22 Dec 2021 18:06:32 +0000 (10:06 -0800)]
Merge tag 'tomoyo-pr-20211222' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1
Pull tomoyo fixes from Tetsuo Handa:
"Two overhead reduction patches for testing/fuzzing environment"
* tag 'tomoyo-pr-20211222' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1:
tomoyo: use hweight16() in tomoyo_domain_quota_is_ok()
tomoyo: Check exceeded quota early in tomoyo_domain_quota_is_ok().
Fix modpost Section mismatch error in memblock_phys_alloc()
[...]
WARNING: modpost: vmlinux.o(.text.unlikely+0x1dcc): Section mismatch in reference
from the function memblock_phys_alloc() to the function .init.text:memblock_phys_alloc_range()
The function memblock_phys_alloc() references
the function __init memblock_phys_alloc_range().
This is often because memblock_phys_alloc lacks a __init
annotation or the annotation of memblock_phys_alloc_range is wrong.
ERROR: modpost: Section mismatches detected.
Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them.
[...]
memblock_phys_alloc() is a one-line wrapper, make it __always_inline to
avoid these section mismatches.
Reported-by: k2ci <kernel-bot@kylinos.cn> Suggested-by: Mike Rapoport <rppt@kernel.org> Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
[rppt: slightly massaged changelog ] Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Link: https://lore.kernel.org/r/20211217020754.2874872-1-liu.yun@linux.dev
Takashi Iwai [Wed, 22 Dec 2021 17:07:27 +0000 (18:07 +0100)]
Merge tag 'asoc-fix-v5.16-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.16
This is a relatively large set of driver specific changes so it may make
sense to hold off to v5.17, though picking some over might be good.
It's a combination of new device IDs and fixes for various driver
specific things which are all small and of the usual "really bad if
you're running into them" level, especially the Tegra ones.
Jiasheng Jiang [Wed, 22 Dec 2021 07:59:44 +0000 (15:59 +0800)]
net: ks8851: Check for error irq
Because platform_get_irq() could fail and return error irq.
Therefore, it might be better to check it if order to avoid the use of
error irq.
Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiasheng Jiang [Wed, 22 Dec 2021 07:41:12 +0000 (15:41 +0800)]
drivers: net: smc911x: Check for error irq
Because platform_get_irq() could fail and return error irq.
Therefore, it might be better to check it if order to avoid the use of
error irq.
Fixes: ae150435b59e ("smsc: Move the SMC (SMSC) drivers") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
Jiasheng Jiang [Wed, 22 Dec 2021 07:12:07 +0000 (15:12 +0800)]
fjes: Check for error irq
I find that platform_get_irq() will not always succeed.
It will return error irq in case of the failure.
Therefore, it might be better to check it if order to avoid the use of
error irq.
Fixes: 658d439b2292 ("fjes: Introduce FUJITSU Extended Socket Network Device driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
bonding: fix ad_actor_system option setting to default
When 802.3ad bond mode is configured the ad_actor_system option is set to
"00:00:00:00:00:00". But when trying to set the all-zeroes MAC as actors'
system address it was failing with EINVAL.
An all-zeroes ethernet address is valid, only multicast addresses are not
valid values.
Fixes: 171a42c38c6e ("bonding: add netlink support for sys prio, actor sys mac, and port key") Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20211221111345.2462-1-ffmancera@riseup.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Tue, 21 Dec 2021 20:31:55 +0000 (12:31 -0800)]
Merge tag 'pm-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a recent regression causing the loop in dpm_prepare() to become
infinite if one of the device ->prepare() callbacks returns an error"
* tag 'pm-5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Fix error handling in dpm_prepare()
Linus Torvalds [Tue, 21 Dec 2021 20:25:57 +0000 (12:25 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- Fix for compilation of selftests on non-x86 architectures
- Fix for kvm_run->if_flag on SEV-ES
- Fix for page table use-after-free if yielding during exit_mm()
- Improve behavior when userspace starts a nested guest with invalid
state
- Fix missed wakeup with assigned devices but no VT-d posted interrupts
- Do not tell userspace to save/restore an unsupported PMU MSR
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPU
KVM: selftests: Add test to verify TRIPLE_FAULT on invalid L2 guest state
KVM: VMX: Fix stale docs for kvm-intel.emulate_invalid_guest_state
KVM: nVMX: Synthesize TRIPLE_FAULT for L2 if emulation is required
KVM: VMX: Always clear vmx->fail on emulation_required
selftests: KVM: Fix non-x86 compiling
KVM: x86: Always set kvm_run->if_flag
KVM: x86/mmu: Don't advance iterator after restart due to yielding
KVM: x86: remove PMU FIXED_CTR3 from msrs_to_save_all
The address bits used to select the futex spinlock need to match those used in
the LWS code in syscall.S. The mask 0x3f8 only selects 7 bits. It should
select 8 bits.
This change fixes the glibc nptl/tst-cond24 and nptl/tst-cond25 tests.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Fixes: 53a42b6324b8 ("parisc: Switch to more fine grained lws locks") Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Helge Deller <deller@gmx.de>
The completer in the "or,ev %r1,%r30,%r30" instruction is reversed, so we are
not clipping the LWS number when we are called from a 32-bit process (W=0).
We need to nulify the following depdi instruction when the least-significant
bit of %r30 is 1.
If the %r20 register is not clipped, a user process could perform a LWS call
that would branch to an undefined location in the kernel and potentially crash
the machine.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # 4.19+ Signed-off-by: Helge Deller <deller@gmx.de>
KVM: VMX: Wake vCPU when delivering posted IRQ even if vCPU == this vCPU
Drop a check that guards triggering a posted interrupt on the currently
running vCPU, and more importantly guards waking the target vCPU if
triggering a posted interrupt fails because the vCPU isn't IN_GUEST_MODE.
If a vIRQ is delivered from asynchronous context, the target vCPU can be
the currently running vCPU and can also be blocking, in which case
skipping kvm_vcpu_wake_up() is effectively dropping what is supposed to
be a wake event for the vCPU.
The "do nothing" logic when "vcpu == running_vcpu" mostly works only
because the majority of calls to ->deliver_posted_interrupt(), especially
when using posted interrupts, come from synchronous KVM context. But if
a device is exposed to the guest using vfio-pci passthrough, the VFIO IRQ
and vCPU are bound to the same pCPU, and the IRQ is _not_ configured to
use posted interrupts, wake events from the device will be delivered to
KVM from IRQ context, e.g.
The driver imposes an arbitrary one second timeout on virtio requests,
but the specification doesn't prevent the virtio device from taking
longer to process requests, so remove this timeout to support all
systems and device implementations.
Fixes: 3a29355a22c0275fe86 ("gpio: Add virtio-gpio driver") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Yann Gautier [Wed, 15 Dec 2021 14:17:26 +0000 (15:17 +0100)]
mmc: mmci: stm32: clear DLYB_CR after sending tuning command
During test campaign, and especially after several unbind/bind sequences,
it has been seen that the SD-card on SDMMC1 thread could freeze.
The freeze always appear on a CMD23 following a CMD19.
Checking SDMMC internal registers shows that the tuning command (CMD19)
has failed.
The freeze is then due to the delay block involved in the tuning sequence.
To correct this, clear the delay block register DLYB_CR register after
the tuning commands.
Heiner Kallweit [Mon, 20 Dec 2021 20:18:44 +0000 (12:18 -0800)]
igb: fix deadlock caused by taking RTNL in RPM resume path
Recent net core changes caused an issue with few Intel drivers
(reportedly igb), where taking RTNL in RPM resume path results in a
deadlock. See [0] for a bug report. I don't think the core changes
are wrong, but taking RTNL in RPM resume path isn't needed.
The Intel drivers are the only ones doing this. See [1] for a
discussion on the issue. Following patch changes the RPM resume path
to not take RTNL.
Jeroen de Borst [Mon, 20 Dec 2021 19:27:46 +0000 (11:27 -0800)]
gve: Correct order of processing device options
The legacy raw addressing device option was processed before the
new RDA queue format option. This caused the supported features mask,
which is provided only on the RDA queue format option, not to be set.
This disabled jumbo-frame support when using raw adressing.
Willem de Bruijn [Mon, 20 Dec 2021 14:50:27 +0000 (09:50 -0500)]
net: skip virtio_net_hdr_set_proto if protocol already set
virtio_net_hdr_set_proto infers skb->protocol from the virtio_net_hdr
gso_type, to avoid packets getting dropped for lack of a proto type.
Its protocol choice is a guess, especially in the case of UFO, where
the single VIRTIO_NET_HDR_GSO_UDP label covers both UFOv4 and UFOv6.
Skip this best effort if the field is already initialized. Whether
explicitly from userspace, or implicitly based on an earlier call to
dev_parse_header_protocol (which is more robust, but was introduced
after this patch).
Willem de Bruijn [Mon, 20 Dec 2021 14:49:01 +0000 (09:49 -0500)]
net: accept UFOv6 packages in virtio_net_hdr_to_skb
Skb with skb->protocol 0 at the time of virtio_net_hdr_to_skb may have
a protocol inferred from virtio_net_hdr with virtio_net_hdr_set_proto.
Unlike TCP, UDP does not have separate types for IPv4 and IPv6. Type
VIRTIO_NET_HDR_GSO_UDP is guessed to be IPv4/UDP. As of the below
commit, UFOv6 packets are dropped due to not matching the protocol as
obtained from dev_parse_header_protocol.
Invert the test to take that L2 protocol field as starting point and
pass both UFOv4 and UFOv6 for VIRTIO_NET_HDR_GSO_UDP.
Willem de Bruijn [Mon, 20 Dec 2021 14:46:08 +0000 (09:46 -0500)]
docs: networking: replace skb_hwtstamp_tx with skb_tstamp_tx
Tiny doc fix. The hardware transmit function was called skb_tstamp_tx
from its introduction in commit ac45f602ee3d ("net: infrastructure for
hardware time stamping") in the same series as this documentation.
Eric Dumazet [Mon, 20 Dec 2021 14:33:30 +0000 (06:33 -0800)]
inet: fully convert sk->sk_rx_dst to RCU rules
syzbot reported various issues around early demux,
one being included in this changelog [1]
sk->sk_rx_dst is using RCU protection without clearly
documenting it.
And following sequences in tcp_v4_do_rcv()/tcp_v6_do_rcv()
are not following standard RCU rules.
[a] dst_release(dst);
[b] sk->sk_rx_dst = NULL;
They look wrong because a delete operation of RCU protected
pointer is supposed to clear the pointer before
the call_rcu()/synchronize_rcu() guarding actual memory freeing.
In some cases indeed, dst could be freed before [b] is done.
We could cheat by clearing sk_rx_dst before calling
dst_release(), but this seems the right time to stick
to standard RCU annotations and debugging facilities.
[1]
BUG: KASAN: use-after-free in dst_check include/net/dst.h:470 [inline]
BUG: KASAN: use-after-free in tcp_v4_early_demux+0x95b/0x960 net/ipv4/tcp_ipv4.c:1792
Read of size 2 at addr ffff88807f1cb73a by task syz-executor.5/9204
The buggy address belongs to the object at ffff88807f1cb700
which belongs to the cache ip_dst_cache of size 176
The buggy address is located 58 bytes inside of
176-byte region [ffff88807f1cb700, ffff88807f1cb7b0)
The buggy address belongs to the page:
page:ffffea0001fc72c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7f1cb
flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000000200dead000000000100dead000000000122ffff8881413bb780
raw: 0000000000000000000000000010001000000001ffffffff0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 5, ts 108466983062, free_ts 108048976062
prep_new_page mm/page_alloc.c:2418 [inline]
get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4149
__alloc_pages+0x1b2/0x500 mm/page_alloc.c:5369
alloc_pages+0x1a7/0x300 mm/mempolicy.c:2191
alloc_slab_page mm/slub.c:1793 [inline]
allocate_slab mm/slub.c:1930 [inline]
new_slab+0x32d/0x4a0 mm/slub.c:1993
___slab_alloc+0x918/0xfe0 mm/slub.c:3022
__slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3109
slab_alloc_node mm/slub.c:3200 [inline]
slab_alloc mm/slub.c:3242 [inline]
kmem_cache_alloc+0x35c/0x3a0 mm/slub.c:3247
dst_alloc+0x146/0x1f0 net/core/dst.c:92
rt_dst_alloc+0x73/0x430 net/ipv4/route.c:1613
__mkroute_output net/ipv4/route.c:2564 [inline]
ip_route_output_key_hash_rcu+0x921/0x2d00 net/ipv4/route.c:2791
ip_route_output_key_hash+0x18b/0x300 net/ipv4/route.c:2619
__ip_route_output_key include/net/route.h:126 [inline]
ip_route_output_flow+0x23/0x150 net/ipv4/route.c:2850
ip_route_output_key include/net/route.h:142 [inline]
geneve_get_v4_rt+0x3a6/0x830 drivers/net/geneve.c:809
geneve_xmit_skb drivers/net/geneve.c:899 [inline]
geneve_xmit+0xc4a/0x3540 drivers/net/geneve.c:1082
__netdev_start_xmit include/linux/netdevice.h:4994 [inline]
netdev_start_xmit include/linux/netdevice.h:5008 [inline]
xmit_one net/core/dev.c:3590 [inline]
dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3606
__dev_queue_xmit+0x299a/0x3650 net/core/dev.c:4229
page last free stack trace:
reset_page_owner include/linux/page_owner.h:24 [inline]
free_pages_prepare mm/page_alloc.c:1338 [inline]
free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1389
free_unref_page_prepare mm/page_alloc.c:3309 [inline]
free_unref_page+0x19/0x690 mm/page_alloc.c:3388
qlink_free mm/kasan/quarantine.c:146 [inline]
qlist_free_all+0x5a/0xc0 mm/kasan/quarantine.c:165
kasan_quarantine_reduce+0x180/0x200 mm/kasan/quarantine.c:272
__kasan_slab_alloc+0xa2/0xc0 mm/kasan/common.c:444
kasan_slab_alloc include/linux/kasan.h:259 [inline]
slab_post_alloc_hook mm/slab.h:519 [inline]
slab_alloc_node mm/slub.c:3234 [inline]
kmem_cache_alloc_node+0x255/0x3f0 mm/slub.c:3270
__alloc_skb+0x215/0x340 net/core/skbuff.c:414
alloc_skb include/linux/skbuff.h:1126 [inline]
alloc_skb_with_frags+0x93/0x620 net/core/skbuff.c:6078
sock_alloc_send_pskb+0x783/0x910 net/core/sock.c:2575
mld_newpack+0x1df/0x770 net/ipv6/mcast.c:1754
add_grhead+0x265/0x330 net/ipv6/mcast.c:1857
add_grec+0x1053/0x14e0 net/ipv6/mcast.c:1995
mld_send_initial_cr.part.0+0xf6/0x230 net/ipv6/mcast.c:2242
mld_send_initial_cr net/ipv6/mcast.c:1232 [inline]
mld_dad_work+0x1d3/0x690 net/ipv6/mcast.c:2268
process_one_work+0x9b2/0x1690 kernel/workqueue.c:2298
worker_thread+0x658/0x11f0 kernel/workqueue.c:2445
Memory state around the buggy address: ffff88807f1cb600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88807f1cb680: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc
>ffff88807f1cb700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^ ffff88807f1cb780: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc ffff88807f1cb800: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Linus Torvalds [Tue, 21 Dec 2021 01:26:42 +0000 (17:26 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Last fixes before holidays. Nothing very exciting:
- Work around a HW bug in HNS HIP08
- Recent memory leak regression in qib
- Incorrect use of kfree() for vmalloc memory in hns"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Replace kfree() with kvfree()
IB/qib: Fix memory leak in qib_user_sdma_queue_pkts()
RDMA/hns: Fix RNR retransmission issue for HIP08
Linus Torvalds [Mon, 20 Dec 2021 18:13:30 +0000 (10:13 -0800)]
Merge tag 'regulator-fix-v5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"Binding fix for v5.16
This fixes problems validating DT bindings using op_mode which wasn't
described as it should have been when converting to DT schema"
* tag 'regulator-fix-v5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: samsung,s5m8767: add missing op_mode to bucks
Helge Deller [Wed, 8 Dec 2021 10:06:52 +0000 (11:06 +0100)]
parisc: Clear stale IIR value on instruction access rights trap
When a trap 7 (Instruction access rights) occurs, this means the CPU
couldn't execute an instruction due to missing execute permissions on
the memory region. In this case it seems the CPU didn't even fetched
the instruction from memory and thus did not store it in the cr19 (IIR)
register before calling the trap handler. So, the trap handler will find
some random old stale value in cr19.
This patch simply overwrites the stale IIR value with a constant magic
"bad food" value (0xbaadf00d), in the hope people don't start to try to
understand the various random IIR values in trap 7 dumps.
Noticed-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
KVM: selftests: Add test to verify TRIPLE_FAULT on invalid L2 guest state
Add a selftest to attempt to enter L2 with invalid guests state by
exiting to userspace via I/O from L2, and then using KVM_SET_SREGS to set
invalid guest state (marking TR unusable is arbitrary chosen for its
relative simplicity).
This is a regression test for a bug introduced by commit c8607e4a086f
("KVM: x86: nVMX: don't fail nested VM entry on invalid guest state if
!from_vmentry"), which incorrectly set vmx->fail=true when L2 had invalid
guest state and ultimately triggered a WARN due to nested_vmx_vmexit()
seeing vmx->fail==true while attempting to synthesize a nested VM-Exit.
The is also a functional test to verify that KVM sythesizes TRIPLE_FAULT
for L2, which is somewhat arbitrary behavior, instead of emulating L2.
KVM should never emulate L2 due to invalid guest state, as it's
architecturally impossible for L1 to run an L2 guest with invalid state
as nested VM-Enter should always fail, i.e. L1 needs to do the emulation.
Stuffing state via KVM ioctl() is a non-architctural, out-of-band case,
hence the TRIPLE_FAULT being rather arbitrary.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211207193006.120997-5-seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: VMX: Fix stale docs for kvm-intel.emulate_invalid_guest_state
Update the documentation for kvm-intel's emulate_invalid_guest_state to
rectify the description of KVM's default behavior, and to document that
the behavior and thus parameter only applies to L1.
Fixes: a27685c33acc ("KVM: VMX: Emulate invalid guest state by default") Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211207193006.120997-4-seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: nVMX: Synthesize TRIPLE_FAULT for L2 if emulation is required
Synthesize a triple fault if L2 guest state is invalid at the time of
VM-Enter, which can happen if L1 modifies SMRAM or if userspace stuffs
guest state via ioctls(), e.g. KVM_SET_SREGS. KVM should never emulate
invalid guest state, since from L1's perspective, it's architecturally
impossible for L2 to have invalid state while L2 is running in hardware.
E.g. attempts to set CR0 or CR4 to unsupported values will either VM-Exit
or #GP.
Modifying vCPU state via RSM+SMRAM and ioctl() are the only paths that
can trigger this scenario, as nested VM-Enter correctly rejects any
attempt to enter L2 with invalid state.
RSM is a straightforward case as (a) KVM follows AMD's SMRAM layout and
behavior, and (b) Intel's SDM states that loading reserved CR0/CR4 bits
via RSM results in shutdown, i.e. there is precedent for KVM's behavior.
Following AMD's SMRAM layout is important as AMD's layout saves/restores
the descriptor cache information, including CS.RPL and SS.RPL, and also
defines all the fields relevant to invalid guest state as read-only, i.e.
so long as the vCPU had valid state before the SMI, which is guaranteed
for L2, RSM will generate valid state unless SMRAM was modified. Intel's
layout saves/restores only the selector, which means that scenarios where
the selector and cached RPL don't match, e.g. conforming code segments,
would yield invalid guest state. Intel CPUs fudge around this issued by
stuffing SS.RPL and CS.RPL on RSM. Per Intel's SDM on the "Default
Treatment of RSM", paraphrasing for brevity:
IF internal storage indicates that the [CPU was post-VMXON]
THEN
enter VMX operation (root or non-root);
restore VMX-critical state as defined in Section 34.14.1;
set to their fixed values any bits in CR0 and CR4 whose values must
be fixed in VMX operation [unless coming from an unrestricted guest];
IF RFLAGS.VM = 0 AND (in VMX root operation OR the
“unrestricted guest” VM-execution control is 0)
THEN
CS.RPL := SS.DPL;
SS.RPL := SS.DPL;
FI;
restore current VMCS pointer;
FI;
Note that Intel CPUs also overwrite the fixed CR0/CR4 bits, whereas KVM
will sythesize TRIPLE_FAULT in this scenario. KVM's behavior is allowed
as both Intel and AMD define CR0/CR4 SMRAM fields as read-only, i.e. the
only way for CR0 and/or CR4 to have illegal values is if they were
modified by the L1 SMM handler, and Intel's SDM "SMRAM State Save Map"
section states "modifying these registers will result in unpredictable
behavior".
KVM's ioctl() behavior is less straightforward. Because KVM allows
ioctls() to be executed in any order, rejecting an ioctl() if it would
result in invalid L2 guest state is not an option as KVM cannot know if
a future ioctl() would resolve the invalid state, e.g. KVM_SET_SREGS, or
drop the vCPU out of L2, e.g. KVM_SET_NESTED_STATE. Ideally, KVM would
reject KVM_RUN if L2 contained invalid guest state, but that carries the
risk of a false positive, e.g. if RSM loaded invalid guest state and KVM
exited to userspace. Setting a flag/request to detect such a scenario is
undesirable because (a) it's extremely unlikely to add value to KVM as a
whole, and (b) KVM would need to consider ioctl() interactions with such
a flag, e.g. if userspace migrated the vCPU while the flag were set.
Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211207193006.120997-3-seanjc@google.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: VMX: Always clear vmx->fail on emulation_required
Revert a relatively recent change that set vmx->fail if the vCPU is in L2
and emulation_required is true, as that behavior is completely bogus.
Setting vmx->fail and synthesizing a VM-Exit is contradictory and wrong:
(a) it's impossible to have both a VM-Fail and VM-Exit
(b) vmcs.EXIT_REASON is not modified on VM-Fail
(c) emulation_required refers to guest state and guest state checks are
always VM-Exits, not VM-Fails.
For KVM specifically, emulation_required is handled before nested exits
in __vmx_handle_exit(), thus setting vmx->fail has no immediate effect,
i.e. KVM calls into handle_invalid_guest_state() and vmx->fail is ignored.
Setting vmx->fail can ultimately result in a WARN in nested_vmx_vmexit()
firing when tearing down the VM as KVM never expects vmx->fail to be set
when L2 is active, KVM always reflects those errors into L1.
Andrew Jones [Tue, 14 Dec 2021 15:18:42 +0000 (16:18 +0100)]
selftests: KVM: Fix non-x86 compiling
Attempting to compile on a non-x86 architecture fails with
include/kvm_util.h: In function ‘vm_compute_max_gfn’:
include/kvm_util.h:79:21: error: dereferencing pointer to incomplete type ‘struct kvm_vm’
return ((1ULL << vm->pa_bits) >> vm->page_shift) - 1;
^~
This is because the declaration of struct kvm_vm is in
lib/kvm_util_internal.h as an effort to make it private to
the test lib code. We can still provide arch specific functions,
though, by making the generic function symbols weak. Do that to
fix the compile error.
Fixes: c8cc43c1eae2 ("selftests: KVM: avoid failures due to reserved HyperTransport region") Cc: stable@vger.kernel.org Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20211214151842.848314-1-drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Marc Orr [Thu, 9 Dec 2021 15:52:57 +0000 (07:52 -0800)]
KVM: x86: Always set kvm_run->if_flag
The kvm_run struct's if_flag is a part of the userspace/kernel API. The
SEV-ES patches failed to set this flag because it's no longer needed by
QEMU (according to the comment in the source code). However, other
hypervisors may make use of this flag. Therefore, set the flag for
guests with encrypted registers (i.e., with guest_state_protected set).
Fixes: f1c6366e3043 ("KVM: SVM: Add required changes to support intercepts under SEV-ES") Signed-off-by: Marc Orr <marcorr@google.com>
Message-Id: <20211209155257.128747-1-marcorr@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
projects / kernel.git / log