Eric Biggers [Fri, 10 Jul 2020 07:20:11 +0000 (00:20 -0700)]
scsi: ufs: Add program_key() variant op
On Snapdragon SoCs, the Linux kernel isn't permitted to directly access the
standard UFS crypto configuration registers. Instead, programming and
evicting keys must be done through vendor-specific SMC calls.
To support this hardware, add a ->program_key() method to 'struct
ufs_hba_variant_ops'. This allows overriding the UFS standard key
programming / eviction procedure.
Eric Biggers [Fri, 10 Jul 2020 07:20:09 +0000 (00:20 -0700)]
scsi: ufs-qcom: Name the dev_ref_clk_ctrl registers
In preparation for adding another optional register range to the ufs-qcom
driver, name the existing optional register range "dev_ref_clk_ctrl_mem".
This allows the driver to refer to the optional register ranges by name
rather than index.
No device-tree files actually have to be updated due to this change, since
none of them actually declares these registers.
Link: https://lore.kernel.org/r/20200710072013.177481-3-ebiggers@kernel.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Eric Biggers [Fri, 10 Jul 2020 07:20:08 +0000 (00:20 -0700)]
scsi: firmware: qcom_scm: Add support for programming inline crypto keys
Add support for the Inline Crypto Engine (ICE) key programming interface
that's needed for the ufs-qcom driver to use inline encryption on
Snapdragon SoCs. This interface consists of two SCM calls: one to program
a key into a keyslot, and one to invalidate a keyslot.
Although the UFS specification defines a standard way to do this, on these
SoCs the Linux kernel isn't permitted to access the needed crypto
configuration registers directly; these SCM calls must be used instead.
Tomas Henzl [Thu, 9 Jul 2020 13:31:44 +0000 (15:31 +0200)]
scsi: megaraid_sas: Clear affinity hint
To avoid a warning in free_irq, clear the affinity hint.
Link: https://lore.kernel.org/r/20200709133144.8363-1-thenzl@redhat.com Fixes: f0b9e7bdc309 ("scsi: megaraid_sas: Set affinity for high IOPS reply queues") Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The controller can become slow to respond to SCSI INQUIRY requests
resulting in the SCSI midlayer offlining the controller device.
Increase the timeout value for commands sent to the controller device.
Link: https://lore.kernel.org/r/159528198335.24772.7963614374905470122.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Mon, 20 Jul 2020 21:52:57 +0000 (16:52 -0500)]
scsi: hpsa: Increase queue depth for external LUNs
Increase queue_depth for PTRAID devices to improve performance.
Link: https://lore.kernel.org/r/159528197765.24772.15623281371636788406.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Mon, 20 Jul 2020 21:52:51 +0000 (16:52 -0500)]
scsi: hpsa: Correct rare oob condition
There are some rare conditions where a spare is first in the device list
causing an array out-of-bounds condition.
Link: https://lore.kernel.org/r/159528197176.24772.14659026352708896249.stgit@brunhilda Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Scott Benesh <scott.benesh@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi: sd_zbc: Don't limit max_zone_append sectors to max_hw_sectors
Don't clamp the maximum number of zone append sectors to the maximum number
of hardware sectors in sd as the block layer is already enforcing this
limit when setting max_zone_append_sectors.
Lee Jones [Mon, 13 Jul 2020 08:00:00 +0000 (09:00 +0100)]
scsi: aic7xxx: Fix 'amount_xferred' set but not used issue
'amount_xferred' is used, but only in certain circumstances. Place
the same stipulations on the defining/allocating of 'amount_xferred'
as is placed when using it.
We've been careful not to change any of the ordering semantics here.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aic7xxx/aic79xx_osm.c: In function ‘ahd_done’:
drivers/scsi/aic7xxx/aic79xx_osm.c:1796:12: warning: variable ‘amount_xferred’ set but not used [-Wunused-but-set-variable]
Lee Jones [Mon, 13 Jul 2020 07:59:59 +0000 (08:59 +0100)]
scsi: aic7xxx: Remove unused variables 'wait' and 'paused'
It looks like they have never actually been used.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aic7xxx/aic79xx_osm.c: In function ‘ahd_linux_dev_reset’:
drivers/scsi/aic7xxx/aic79xx_osm.c:782:9: warning: variable ‘wait’ set but not used [-Wunused-but-set-variable]
drivers/scsi/aic7xxx/aic79xx_osm.c:781:9: warning: variable ‘paused’ set but not used [-Wunused-but-set-variable]
Lee Jones [Mon, 13 Jul 2020 07:59:58 +0000 (08:59 +0100)]
scsi: aic7xxx: Remove unused variable 'ahd'
Hasn't been used since 2005.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aic7xxx/aic79xx_osm.c: In function ‘ahd_linux_slave_configure’:
drivers/scsi/aic7xxx/aic79xx_osm.c:703:20: warning: variable ‘ahd’ set but not used [-Wunused-but-set-variable]
Lee Jones [Mon, 13 Jul 2020 07:59:57 +0000 (08:59 +0100)]
scsi: lpfc: Correct some pretty obvious misdocumentation
Either due to API slippage before the driver was mainlined or copy/paste
errors.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/lpfc/lpfc_nvme.c:254: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_create_queue'
drivers/scsi/lpfc/lpfc_nvme.c:254: warning: Function parameter or member 'qsize' not described in 'lpfc_nvme_create_queue'
drivers/scsi/lpfc/lpfc_nvme.c:254: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_create_queue'
drivers/scsi/lpfc/lpfc_nvme.c:311: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_delete_queue'
drivers/scsi/lpfc/lpfc_nvme.c:311: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_delete_queue'
drivers/scsi/lpfc/lpfc_nvme.c:689: warning: Function parameter or member 'gen_req_cmp' not described in '__lpfc_nvme_ls_req'
drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_ls_req'
drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_ls_req'
drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Function parameter or member 'pnvme_lsreq' not described in 'lpfc_nvme_ls_req'
drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_ls_req'
drivers/scsi/lpfc/lpfc_nvme.c:801: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_ls_req'
drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_ls_abort'
drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_ls_abort'
drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Function parameter or member 'pnvme_lsreq' not described in 'lpfc_nvme_ls_abort'
drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_ls_abort'
drivers/scsi/lpfc/lpfc_nvme.c:937: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_ls_abort'
drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Function parameter or member 'phba' not described in 'lpfc_nvme_io_cmd_wqe_cmpl'
drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Function parameter or member 'pwqeIn' not described in 'lpfc_nvme_io_cmd_wqe_cmpl'
drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Function parameter or member 'wcqe' not described in 'lpfc_nvme_io_cmd_wqe_cmpl'
drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_io_cmd_wqe_cmpl'
drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_io_cmd_wqe_cmpl'
drivers/scsi/lpfc/lpfc_nvme.c:1075: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_io_cmd_wqe_cmpl'
drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_prep_io_cmd'
drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'lpfc_ncmd' not described in 'lpfc_nvme_prep_io_cmd'
drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'pnode' not described in 'lpfc_nvme_prep_io_cmd'
drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Function parameter or member 'cstat' not described in 'lpfc_nvme_prep_io_cmd'
drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_prep_io_cmd'
drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_prep_io_cmd'
drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_prep_io_cmd'
drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_prep_io_cmd'
drivers/scsi/lpfc/lpfc_nvme.c:1313: warning: Excess function parameter 'hw_queue_handle' description in 'lpfc_nvme_prep_io_cmd'
drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_prep_io_dma'
drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Function parameter or member 'lpfc_ncmd' not described in 'lpfc_nvme_prep_io_dma'
drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_prep_io_dma'
drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_prep_io_dma'
drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_prep_io_dma'
drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_prep_io_dma'
drivers/scsi/lpfc/lpfc_nvme.c:1420: warning: Excess function parameter 'hw_queue_handle' description in 'lpfc_nvme_prep_io_dma'
drivers/scsi/lpfc/lpfc_nvme.c:1598: warning: bad line: indicated in @lpfc_nvme_rport.
drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_fcp_io_submit'
drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_fcp_io_submit'
drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Function parameter or member 'pnvme_fcreq' not described in 'lpfc_nvme_fcp_io_submit'
drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_fcp_io_submit'
drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_fcp_io_submit'
drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_fcp_io_submit'
drivers/scsi/lpfc/lpfc_nvme.c:1609: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_fcp_io_submit'
drivers/scsi/lpfc/lpfc_nvme.c:1856: warning: Function parameter or member 'abts_cmpl' not described in 'lpfc_nvme_abort_fcreq_cmpl'
drivers/scsi/lpfc/lpfc_nvme.c:1856: warning: Excess function parameter 'rspiocb' description in 'lpfc_nvme_abort_fcreq_cmpl'
drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Function parameter or member 'pnvme_lport' not described in 'lpfc_nvme_fcp_abort'
drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Function parameter or member 'pnvme_rport' not described in 'lpfc_nvme_fcp_abort'
drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Function parameter or member 'pnvme_fcreq' not described in 'lpfc_nvme_fcp_abort'
drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_pnvme' description in 'lpfc_nvme_fcp_abort'
drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_nvme_lport' description in 'lpfc_nvme_fcp_abort'
drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_nvme_rport' description in 'lpfc_nvme_fcp_abort'
drivers/scsi/lpfc/lpfc_nvme.c:1892: warning: Excess function parameter 'lpfc_nvme_fcreq' description in 'lpfc_nvme_fcp_abort'
drivers/scsi/lpfc/lpfc_nvme.c:2093: warning: Function parameter or member 'ndlp' not described in 'lpfc_get_nvme_buf'
drivers/scsi/lpfc/lpfc_nvme.c:2093: warning: Function parameter or member 'idx' not described in 'lpfc_get_nvme_buf'
drivers/scsi/lpfc/lpfc_nvme.c:2093: warning: Function parameter or member 'expedite' not described in 'lpfc_get_nvme_buf'
drivers/scsi/lpfc/lpfc_nvme.c:2197: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_create_localport'
drivers/scsi/lpfc/lpfc_nvme.c:2330: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_destroy_localport'
drivers/scsi/lpfc/lpfc_nvme.c:2330: warning: Excess function parameter 'pnvme' description in 'lpfc_nvme_destroy_localport'
drivers/scsi/lpfc/lpfc_nvme.c:2543: warning: Function parameter or member 'vport' not described in 'lpfc_nvme_rescan_port'
drivers/scsi/lpfc/lpfc_nvme.c:2543: warning: Function parameter or member 'ndlp' not described in 'lpfc_nvme_rescan_port'
Lee Jones [Mon, 13 Jul 2020 07:59:55 +0000 (08:59 +0100)]
scsi: be2iscsi: Fix misdocumentation of 'pcontext'
Also demote unintentional kerneldoc header.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/be2iscsi/be_main.c:986: warning: Function parameter or member 'pcontext' not described in 'alloc_wrb_handle'
drivers/scsi/be2iscsi/be_main.c:986: warning: Excess function parameter 'pwrb_context' description in 'alloc_wrb_handle'
drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'beiscsi_conn' not described in 'beiscsi_complete_pdu'
drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'phdr' not described in 'beiscsi_complete_pdu'
drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'pdata' not described in 'beiscsi_complete_pdu'
drivers/scsi/be2iscsi/be_main.c:1409: warning: Function parameter or member 'dlen' not described in 'beiscsi_complete_pdu'
Link: https://lore.kernel.org/r/20200713080001.128044-19-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: linux-drivers@broadcom.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:59:54 +0000 (08:59 +0100)]
scsi: be2iscsi: Fix API/documentation slip
And add descriptions for a couple of missing function parameters.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/be2iscsi/be_iscsi.c:38: warning: Function parameter or member 'ep' not described in 'beiscsi_session_create'
drivers/scsi/be2iscsi/be_iscsi.c:173: warning: Function parameter or member 'is_leading' not described in 'beiscsi_conn_bind'
drivers/scsi/be2iscsi/be_iscsi.c:998: warning: Function parameter or member 'beiscsi_ep' not described in 'beiscsi_free_ep'
drivers/scsi/be2iscsi/be_iscsi.c:998: warning: Excess function parameter 'ep' description in 'beiscsi_free_ep'
drivers/scsi/be2iscsi/be_iscsi.c:1039: warning: Function parameter or member 'non_blocking' not described in 'beiscsi_open_conn'
drivers/scsi/be2iscsi/be_iscsi.c:1135: warning: Function parameter or member 'shost' not described in 'beiscsi_ep_connect'
drivers/scsi/be2iscsi/be_iscsi.c:1135: warning: Excess function parameter 'scsi_host' description in 'beiscsi_ep_connect'
drivers/scsi/be2iscsi/be_iscsi.c:1236: warning: Function parameter or member 'beiscsi_ep' not described in 'beiscsi_conn_close'
drivers/scsi/be2iscsi/be_iscsi.c:1236: warning: Excess function parameter 'ep' description in 'beiscsi_conn_close'
Link: https://lore.kernel.org/r/20200713080001.128044-18-lee.jones@linaro.org Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: linux-drivers@broadcom.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:59:52 +0000 (08:59 +0100)]
scsi: myrs: Demote obvious misuse of kerneldoc to standard comment blocks
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/myrs.c:94: warning: Function parameter or member 'cmd_blk' not described in 'myrs_reset_cmd'
drivers/scsi/myrs.c:105: warning: Function parameter or member 'cs' not described in 'myrs_qcmd'
drivers/scsi/myrs.c:105: warning: Function parameter or member 'cmd_blk' not described in 'myrs_qcmd'
drivers/scsi/myrs.c:130: warning: Function parameter or member 'cs' not described in 'myrs_exec_cmd'
drivers/scsi/myrs.c:130: warning: Function parameter or member 'cmd_blk' not described in 'myrs_exec_cmd'
drivers/scsi/myrs.c:149: warning: Function parameter or member 'cs' not described in 'myrs_report_progress'
drivers/scsi/myrs.c:149: warning: Function parameter or member 'ldev_num' not described in 'myrs_report_progress'
drivers/scsi/myrs.c:149: warning: Function parameter or member 'msg' not described in 'myrs_report_progress'
drivers/scsi/myrs.c:149: warning: Function parameter or member 'blocks' not described in 'myrs_report_progress'
drivers/scsi/myrs.c:149: warning: Function parameter or member 'size' not described in 'myrs_report_progress'
drivers/scsi/myrs.c:160: warning: Function parameter or member 'cs' not described in 'myrs_get_ctlr_info'
drivers/scsi/myrs.c:222: warning: Function parameter or member 'cs' not described in 'myrs_get_ldev_info'
drivers/scsi/myrs.c:222: warning: Function parameter or member 'ldev_num' not described in 'myrs_get_ldev_info'
drivers/scsi/myrs.c:222: warning: Function parameter or member 'ldev_info' not described in 'myrs_get_ldev_info'
drivers/scsi/myrs.c:310: warning: Function parameter or member 'cs' not described in 'myrs_get_pdev_info'
drivers/scsi/myrs.c:310: warning: Function parameter or member 'channel' not described in 'myrs_get_pdev_info'
drivers/scsi/myrs.c:310: warning: Function parameter or member 'target' not described in 'myrs_get_pdev_info'
drivers/scsi/myrs.c:310: warning: Function parameter or member 'lun' not described in 'myrs_get_pdev_info'
drivers/scsi/myrs.c:310: warning: Function parameter or member 'pdev_info' not described in 'myrs_get_pdev_info'
drivers/scsi/myrs.c:353: warning: Function parameter or member 'cs' not described in 'myrs_dev_op'
drivers/scsi/myrs.c:353: warning: Function parameter or member 'opcode' not described in 'myrs_dev_op'
drivers/scsi/myrs.c:353: warning: Function parameter or member 'opdev' not described in 'myrs_dev_op'
drivers/scsi/myrs.c:379: warning: Function parameter or member 'cs' not described in 'myrs_translate_pdev'
drivers/scsi/myrs.c:379: warning: Function parameter or member 'channel' not described in 'myrs_translate_pdev'
drivers/scsi/myrs.c:379: warning: Function parameter or member 'target' not described in 'myrs_translate_pdev'
drivers/scsi/myrs.c:379: warning: Function parameter or member 'lun' not described in 'myrs_translate_pdev'
drivers/scsi/myrs.c:379: warning: Function parameter or member 'devmap' not described in 'myrs_translate_pdev'
drivers/scsi/myrs.c:422: warning: Function parameter or member 'cs' not described in 'myrs_get_event'
drivers/scsi/myrs.c:422: warning: Function parameter or member 'event_num' not described in 'myrs_get_event'
drivers/scsi/myrs.c:422: warning: Function parameter or member 'event_buf' not described in 'myrs_get_event'
drivers/scsi/myrs.c:484: warning: Function parameter or member 'cs' not described in 'myrs_enable_mmio_mbox'
drivers/scsi/myrs.c:484: warning: Function parameter or member 'enable_mbox_fn' not described in 'myrs_enable_mmio_mbox'
drivers/scsi/myrs.c:584: warning: Function parameter or member 'cs' not described in 'myrs_get_config'
drivers/scsi/myrs.c:688: warning: cannot understand function prototype: 'struct '
drivers/scsi/myrs.c:1967: warning: Function parameter or member 'dev' not described in 'myrs_is_raid'
drivers/scsi/myrs.c:1980: warning: Function parameter or member 'dev' not described in 'myrs_get_resync'
drivers/scsi/myrs.c:2005: warning: Function parameter or member 'dev' not described in 'myrs_get_state'
drivers/scsi/myrs.c:2343: warning: bad line: the Error Status Register when the driver performs the BIOS handshaking.
drivers/scsi/myrs.c:2344: warning: bad line: It returns true for fatal errors and false otherwise.
drivers/scsi/myrs.c:2349: warning: Function parameter or member 'cs' not described in 'myrs_err_status'
drivers/scsi/myrs.c:2349: warning: Function parameter or member 'status' not described in 'myrs_err_status'
drivers/scsi/myrs.c:2349: warning: Function parameter or member 'parm0' not described in 'myrs_err_status'
drivers/scsi/myrs.c:2349: warning: Function parameter or member 'parm1' not described in 'myrs_err_status'
Link: https://lore.kernel.org/r/20200713080001.128044-16-lee.jones@linaro.org Cc: Hannes Reinecke <hare@kernel.org> Cc: Linux GmbH <hare@suse.com> Cc: "Leonard N. Zubkoff" <lnz@dandelion.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:59:51 +0000 (08:59 +0100)]
scsi: ipr: Fix struct packed-not-aligned issues
Fixes the following W=1 kernel build warning(s):
drivers/scsi/ipr.h:1687:1: warning: alignment 1 of ‘struct ipr_dump_location_entry’ is less than 4 [-Wpacked-not-aligned]
1687 | }__attribute__((packed));
| ^
drivers/scsi/ipr.h:1711:1: warning: alignment 1 of ‘struct ipr_driver_dump’ is less than 4 [-Wpacked-not-aligned]
1711 | }__attribute__((packed));
| ^
Lee Jones [Mon, 13 Jul 2020 07:59:50 +0000 (08:59 +0100)]
scsi: ipr: Remove a bunch of set but checked variables
Fixes the following W=1 kernel build warning(s):
In file included from drivers/scsi/ipr.c:73:
drivers/scsi/ipr.c: In function ‘ipr_mask_and_clear_interrupts’:
drivers/scsi/ipr.c:740:15: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable]
drivers/scsi/ipr.c: In function ‘ipr_cancel_op’:
drivers/scsi/ipr.c:5497:13: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable]
drivers/scsi/ipr.c: In function ‘ipr_iopoll’:
drivers/scsi/ipr.c:5765:22: warning: variable ‘ioa_cfg’ set but not used [-Wunused-but-set-variable]
drivers/scsi/ipr.c: In function ‘ipr_reset_restore_cfg_space’:
drivers/scsi/ipr.c:8662:6: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable]
drivers/scsi/ipr.c: In function ‘ipr_test_msi’:
This is the only use of kerneldoc in the sourcefile and no descriptions are
provided.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/virtio_scsi.c:109: warning: Function parameter or member 'vscsi' not described in 'virtscsi_complete_cmd'
drivers/scsi/virtio_scsi.c:109: warning: Function parameter or member 'buf' not described in 'virtscsi_complete_cmd'
Link: https://lore.kernel.org/r/20200713080001.128044-13-lee.jones@linaro.org Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: virtualization@lists.linux-foundation.org Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:59:48 +0000 (08:59 +0100)]
scsi: ipr: Fix a mountain of kerneldoc misdemeanours
Mainly misspellings and/or missing function parameter descriptions.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/ipr.c:10100:15: warning: variable ‘int_reg’ set but not used [-Wunused-but-set-variable]
drivers/scsi/ipr.c:679: warning: Function parameter or member 'fast_done' not described in 'ipr_init_ipr_cmnd'
drivers/scsi/ipr.c:697: warning: Function parameter or member 'hrrq' not described in '__ipr_get_free_ipr_cmnd'
drivers/scsi/ipr.c:697: warning: Excess function parameter 'ioa_cfg' description in '__ipr_get_free_ipr_cmnd'
drivers/scsi/ipr.c:1297: warning: Function parameter or member 'buffer' not described in '__ipr_format_res_path'
drivers/scsi/ipr.c:1297: warning: Excess function parameter 'buf' description in '__ipr_format_res_path'
drivers/scsi/ipr.c:1321: warning: Function parameter or member 'buffer' not described in 'ipr_format_res_path'
drivers/scsi/ipr.c:1321: warning: Excess function parameter 'buf' description in 'ipr_format_res_path'
drivers/scsi/ipr.c:1400: warning: Excess function parameter 'cfgtew' description in 'ipr_clear_res_target'
drivers/scsi/ipr.c:2679: warning: Function parameter or member 't' not described in 'ipr_timeout'
drivers/scsi/ipr.c:2679: warning: Excess function parameter 'ipr_cmd' description in 'ipr_timeout'
drivers/scsi/ipr.c:2712: warning: Function parameter or member 't' not described in 'ipr_oper_timeout'
drivers/scsi/ipr.c:2712: warning: Excess function parameter 'ipr_cmd' description in 'ipr_oper_timeout'
drivers/scsi/ipr.c:3494: warning: Function parameter or member 'attr' not described in 'ipr_show_fw_version'
drivers/scsi/ipr.c:3528: warning: Function parameter or member 'attr' not described in 'ipr_show_log_level'
drivers/scsi/ipr.c:3551: warning: Function parameter or member 'attr' not described in 'ipr_store_log_level'
drivers/scsi/ipr.c:3551: warning: Function parameter or member 'count' not described in 'ipr_store_log_level'
drivers/scsi/ipr.c:3586: warning: Function parameter or member 'attr' not described in 'ipr_store_diagnostics'
drivers/scsi/ipr.c:3642: warning: Function parameter or member 'dev' not described in 'ipr_show_adapter_state'
drivers/scsi/ipr.c:3642: warning: Function parameter or member 'attr' not described in 'ipr_show_adapter_state'
drivers/scsi/ipr.c:3642: warning: Excess function parameter 'class_dev' description in 'ipr_show_adapter_state'
drivers/scsi/ipr.c:3671: warning: Function parameter or member 'attr' not described in 'ipr_store_adapter_state'
drivers/scsi/ipr.c:3722: warning: Function parameter or member 'attr' not described in 'ipr_store_reset_adapter'
drivers/scsi/ipr.c:3783: warning: Function parameter or member 'attr' not described in 'ipr_store_iopoll_weight'
drivers/scsi/ipr.c:3783: warning: Function parameter or member 'count' not described in 'ipr_store_iopoll_weight'
drivers/scsi/ipr.c:3883: warning: Function parameter or member 'sglist' not described in 'ipr_free_ucode_buffer'
drivers/scsi/ipr.c:3883: warning: Excess function parameter 'p_dnld' description in 'ipr_free_ucode_buffer'
drivers/scsi/ipr.c:4074: warning: Function parameter or member 'dev' not described in 'ipr_store_update_fw'
drivers/scsi/ipr.c:4074: warning: Function parameter or member 'attr' not described in 'ipr_store_update_fw'
drivers/scsi/ipr.c:4074: warning: Excess function parameter 'class_dev' description in 'ipr_store_update_fw'
drivers/scsi/ipr.c:4149: warning: Function parameter or member 'attr' not described in 'ipr_show_fw_type'
drivers/scsi/ipr.c:4489: warning: Excess function parameter 'reason' description in 'ipr_change_queue_depth'
drivers/scsi/ipr.c:4660: warning: Function parameter or member 'attr' not described in 'ipr_show_raw_mode'
drivers/scsi/ipr.c:4688: warning: Function parameter or member 'attr' not described in 'ipr_store_raw_mode'
drivers/scsi/ipr.c:4688: warning: Function parameter or member 'count' not described in 'ipr_store_raw_mode'
drivers/scsi/ipr.c:5069: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_cmnd_is_free'
drivers/scsi/ipr.c:5108: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_wait_for_ops'
drivers/scsi/ipr.c:5108: warning: Excess function parameter 'ipr_cmd' description in 'ipr_wait_for_ops'
drivers/scsi/ipr.c:5272: warning: Function parameter or member 'deadline' not described in 'ipr_sata_reset'
drivers/scsi/ipr.c:5453: warning: Function parameter or member 't' not described in 'ipr_abort_timeout'
drivers/scsi/ipr.c:5453: warning: Excess function parameter 'ipr_cmd' description in 'ipr_abort_timeout'
drivers/scsi/ipr.c:5578: warning: Function parameter or member 'shost' not described in 'ipr_scan_finished'
drivers/scsi/ipr.c:5578: warning: Function parameter or member 'elapsed_time' not described in 'ipr_scan_finished'
drivers/scsi/ipr.c:5578: warning: Excess function parameter 'scsi_cmd' description in 'ipr_scan_finished'
drivers/scsi/ipr.c:5704: warning: Function parameter or member 'number' not described in 'ipr_isr_eh'
drivers/scsi/ipr.c:6278: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_gen_sense'
drivers/scsi/ipr.c:6278: warning: Excess function parameter 'ioasa' description in 'ipr_gen_sense'
drivers/scsi/ipr.c:6278: warning: Excess function parameter 'sense_buf' description in 'ipr_gen_sense'
drivers/scsi/ipr.c:6711: warning: Function parameter or member 'host' not described in 'ipr_ioa_info'
drivers/scsi/ipr.c:6711: warning: Excess function parameter 'scsi_host' description in 'ipr_ioa_info'
drivers/scsi/ipr.c:7606: warning: Function parameter or member 'res_handle' not described in 'ipr_build_mode_sense'
drivers/scsi/ipr.c:7606: warning: Excess function parameter 'res' description in 'ipr_build_mode_sense'
drivers/scsi/ipr.c:7947: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_ioafp_set_caching_parameters'
drivers/scsi/ipr.c:7986: warning: Function parameter or member 'flags' not described in 'ipr_ioafp_inquiry'
drivers/scsi/ipr.c:7986: warning: Function parameter or member 'page' not described in 'ipr_ioafp_inquiry'
drivers/scsi/ipr.c:7986: warning: Function parameter or member 'dma_addr' not described in 'ipr_ioafp_inquiry'
drivers/scsi/ipr.c:7986: warning: Function parameter or member 'xfer_len' not described in 'ipr_ioafp_inquiry'
drivers/scsi/ipr.c:8280: warning: Function parameter or member 't' not described in 'ipr_reset_timer_done'
drivers/scsi/ipr.c:8280: warning: Excess function parameter 'ipr_cmd' description in 'ipr_reset_timer_done'
drivers/scsi/ipr.c:9486: warning: bad line:
drivers/scsi/ipr.c:9609: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_free_all_resources'
drivers/scsi/ipr.c:9609: warning: Excess function parameter 'ipr_cmd' description in 'ipr_free_all_resources'
drivers/scsi/ipr.c:10071: warning: Function parameter or member 'irq' not described in 'ipr_test_intr'
drivers/scsi/ipr.c:10071: warning: Function parameter or member 'devp' not described in 'ipr_test_intr'
drivers/scsi/ipr.c:10071: warning: Excess function parameter 'pdev' description in 'ipr_test_intr'
drivers/scsi/ipr.c:10098: warning: Function parameter or member 'ioa_cfg' not described in 'ipr_test_msi'
drivers/scsi/ipr.c:10538: warning: Function parameter or member 'pdev' not described in 'ipr_probe'
drivers/scsi/ipr.c:10538: warning: Function parameter or member 'dev_id' not described in 'ipr_probe'
drivers/scsi/ipr.c:10794: warning: Function parameter or member 'ipr_cmd' not described in 'ipr_halt_done'
drivers/scsi/ipr.c:10805: warning: Function parameter or member 'nb' not described in 'ipr_halt'
drivers/scsi/ipr.c:10805: warning: Function parameter or member 'event' not described in 'ipr_halt'
drivers/scsi/ipr.c:10805: warning: Function parameter or member 'buf' not described in 'ipr_halt'
Lee Jones [Mon, 13 Jul 2020 07:59:47 +0000 (08:59 +0100)]
scsi: pm8001: Provide descriptions for the many undocumented 'attr's
... even if they are completely unused.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/pm8001/pm8001_ctl.c:56: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_mpi_interface_rev_show'
drivers/scsi/pm8001/pm8001_ctl.c:81: warning: Function parameter or member 'attr' not described in 'controller_fatal_error_show'
drivers/scsi/pm8001/pm8001_ctl.c:100: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_fw_version_show'
drivers/scsi/pm8001/pm8001_ctl.c:130: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ila_version_show'
drivers/scsi/pm8001/pm8001_ctl.c:155: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_inactive_fw_version_show'
drivers/scsi/pm8001/pm8001_ctl.c:181: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_max_out_io_show'
drivers/scsi/pm8001/pm8001_ctl.c:204: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_max_devices_show'
drivers/scsi/pm8001/pm8001_ctl.c:230: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_max_sg_list_show'
drivers/scsi/pm8001/pm8001_ctl.c:274: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_sas_spec_support_show'
drivers/scsi/pm8001/pm8001_ctl.c:303: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_host_sas_address_show'
drivers/scsi/pm8001/pm8001_ctl.c:322: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_logging_level_show'
drivers/scsi/pm8001/pm8001_ctl.c:355: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_aap_log_show'
drivers/scsi/pm8001/pm8001_ctl.c:390: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ib_queue_log_show'
drivers/scsi/pm8001/pm8001_ctl.c:423: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_ob_queue_log_show'
drivers/scsi/pm8001/pm8001_ctl.c:454: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_bios_version_show'
drivers/scsi/pm8001/pm8001_ctl.c:492: warning: Function parameter or member 'attr' not described in 'event_log_size_show'
drivers/scsi/pm8001/pm8001_ctl.c:510: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_iop_log_show'
drivers/scsi/pm8001/pm8001_ctl.c:548: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_fatal_log_show'
drivers/scsi/pm8001/pm8001_ctl.c:566: warning: Function parameter or member 'attr' not described in 'non_fatal_log_show'
drivers/scsi/pm8001/pm8001_ctl.c:609: warning: Function parameter or member 'attr' not described in 'pm8001_ctl_gsm_log_show'
Lee Jones [Mon, 13 Jul 2020 07:59:46 +0000 (08:59 +0100)]
scsi: aacraid: Fill in the very parameter descriptions for rx_sync_cmd()
... and document aac_rx_ioremap() 'dev' param.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p2' not described in 'rx_sync_cmd'
drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p3' not described in 'rx_sync_cmd'
drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p4' not described in 'rx_sync_cmd'
drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p5' not described in 'rx_sync_cmd'
drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'p6' not described in 'rx_sync_cmd'
drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'status' not described in 'rx_sync_cmd'
drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r1' not described in 'rx_sync_cmd'
drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r2' not described in 'rx_sync_cmd'
drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r3' not described in 'rx_sync_cmd'
drivers/scsi/aacraid/rx.c:156: warning: Function parameter or member 'r4' not described in 'rx_sync_cmd'
drivers/scsi/aacraid/rx.c:156: warning: Excess function parameter 'ret' description in 'rx_sync_cmd'
drivers/scsi/aacraid/rx.c:450: warning: Function parameter or member 'dev' not described in 'aac_rx_ioremap'
Link: https://lore.kernel.org/r/20200713080001.128044-10-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:59:45 +0000 (08:59 +0100)]
scsi: aic94xx: Fix a couple of formatting and bitrot issues
Kerneldoc format should be '@.*: ', else the checker gets confused.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aic94xx/aic94xx_scb.c:137: warning: Function parameter or member 'phy' not described in 'asd_get_attached_sas_addr'
drivers/scsi/aic94xx/aic94xx_scb.c:137: warning: Function parameter or member 'sas_addr' not described in 'asd_get_attached_sas_addr'
drivers/scsi/aic94xx/aic94xx_scb.c:860: warning: Function parameter or member 't' not described in 'asd_ascb_timedout'
drivers/scsi/aic94xx/aic94xx_scb.c:860: warning: Excess function parameter 'data' description in 'asd_ascb_timedout'
Lee Jones [Mon, 13 Jul 2020 07:59:44 +0000 (08:59 +0100)]
scsi: aacraid: Fix a bunch of function header issues
Some parameters not documented. Others misspelled.
Also, functions must follow directly after the header that documents them.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aacraid/commsup.c:223: warning: Function parameter or member 'scmd' not described in 'aac_fib_alloc_tag'
drivers/scsi/aacraid/commsup.c:421: warning: Function parameter or member 'qid' not described in 'aac_queue_get'
drivers/scsi/aacraid/commsup.c:421: warning: Function parameter or member 'hw_fib' not described in 'aac_queue_get'
drivers/scsi/aacraid/commsup.c:421: warning: Excess function parameter 'priority' description in 'aac_queue_get'
drivers/scsi/aacraid/commsup.c:421: warning: Excess function parameter 'fib' description in 'aac_queue_get'
drivers/scsi/aacraid/commsup.c:943: warning: Function parameter or member 'fibptr' not described in 'aac_fib_complete'
drivers/scsi/aacraid/commsup.c:943: warning: Excess function parameter 'fib' description in 'aac_fib_complete'
drivers/scsi/aacraid/commsup.c:1061: warning: Excess function parameter 'dev' description in 'AIF_SNIFF_TIMEOUT'
drivers/scsi/aacraid/commsup.c:1061: warning: Excess function parameter 'fibptr' description in 'AIF_SNIFF_TIMEOUT'
drivers/scsi/aacraid/commsup.c:2428: warning: Function parameter or member 'data' not described in 'aac_command_thread'
drivers/scsi/aacraid/commsup.c:2428: warning: Excess function parameter 'dev' description in 'aac_command_thread'
Link: https://lore.kernel.org/r/20200713080001.128044-8-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:59:43 +0000 (08:59 +0100)]
scsi: aic94xx: Document 'lseq' and repair asd_update_port_links() header
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aic94xx/aic94xx_seq.c:587: warning: Function parameter or member 'lseq' not described in 'asd_init_lseq_mip'
drivers/scsi/aic94xx/aic94xx_seq.c:674: warning: Function parameter or member 'lseq' not described in 'asd_init_lseq_mdp'
drivers/scsi/aic94xx/aic94xx_seq.c:958: warning: Function parameter or member 'lseq' not described in 'asd_init_lseq_cio'
drivers/scsi/aic94xx/aic94xx_seq.c:1364: warning: Function parameter or member 'asd_ha' not described in 'asd_update_port_links'
drivers/scsi/aic94xx/aic94xx_seq.c:1364: warning: Function parameter or member 'phy' not described in 'asd_update_port_links'
drivers/scsi/aic94xx/aic94xx_seq.c:1364: warning: Excess function parameter 'sas_phy' description in 'asd_update_port_links'
Lee Jones [Mon, 13 Jul 2020 07:59:42 +0000 (08:59 +0100)]
scsi: aacraid: Demote partially documented function header
This should be populated by someone who knows the meaning of all the
params.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aacraid/dpcsup.c:272: warning: Function parameter or member 'isAif' not described in 'aac_intr_normal'
drivers/scsi/aacraid/dpcsup.c:272: warning: Function parameter or member 'isFastResponse' not described in 'aac_intr_normal'
drivers/scsi/aacraid/dpcsup.c:272: warning: Function parameter or member 'aif_fib' not described in 'aac_intr_normal'
Link: https://lore.kernel.org/r/20200713080001.128044-6-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:59:41 +0000 (08:59 +0100)]
scsi: aacraid: Remove unused variable 'status'
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aacraid/dpcsup.c: In function ‘aac_aif_callback’:
drivers/scsi/aacraid/dpcsup.c:232:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
232 | int status;
| ^~~~~~
Link: https://lore.kernel.org/r/20200713080001.128044-5-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:59:40 +0000 (08:59 +0100)]
scsi: aacraid: Fix logical bug when !DBG
When DBG is not enabled FIB_COUNTER_INCREMENT() results in an empty
statement, leaving the contents of if() and else() empty.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aacraid/dpcsup.c: In function ‘aac_response_normal’:
drivers/scsi/aacraid/dpcsup.c:105:50: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
105 | FIB_COUNTER_INCREMENT(aac_config.AsyncRecved);
| ^
drivers/scsi/aacraid/dpcsup.c: In function ‘aac_intr_normal’:
drivers/scsi/aacraid/dpcsup.c:411:30: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
411 | aac_config.AsyncRecved);
| ^
Link: https://lore.kernel.org/r/20200713080001.128044-4-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:59:39 +0000 (08:59 +0100)]
scsi: aacraid: Fix a few kerneldoc issues
Functions must follow imediately after the header documenting them and all
parameters must be present.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aacraid/commctrl.c:43: warning: Excess function parameter 'dev' description in 'AAC_DEBUG_PREAMBLE'
drivers/scsi/aacraid/commctrl.c:43: warning: Excess function parameter 'arg' description in 'AAC_DEBUG_PREAMBLE'
drivers/scsi/aacraid/commctrl.c:167: warning: Function parameter or member 'dev' not described in 'open_getadapter_fib'
drivers/scsi/aacraid/commctrl.c:167: warning: Function parameter or member 'arg' not described in 'open_getadapter_fib'
drivers/scsi/aacraid/commctrl.c:458: warning: Cannot understand *
on line 458 - I thought it was a doc line
Link: https://lore.kernel.org/r/20200713080001.128044-3-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:59:38 +0000 (08:59 +0100)]
scsi: aacraid: Repair two kerneldoc headers
The function headers for aac_get_config_status() and aac_get_containers()
have suffered bitrot where the documentation hasn't kept up with the API.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'dev' not described in 'aac_get_config_status'
drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'commit_flag' not described in 'aac_get_config_status'
drivers/scsi/aacraid/aachba.c:358: warning: Excess function parameter 'common' description in 'aac_get_config_status'
drivers/scsi/aacraid/aachba.c:450: warning: Function parameter or member 'dev' not described in 'aac_get_containers'
drivers/scsi/aacraid/aachba.c:450: warning: Excess function parameter 'common' description in 'aac_get_containers'
Link: https://lore.kernel.org/r/20200713080001.128044-2-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20200715025523.34620-1-yuehaibing@huawei.com Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
James Smart [Tue, 14 Jul 2020 21:14:12 +0000 (14:14 -0700)]
scsi: lpfc: NVMe remote port devloss_tmo from lldd
nvme-fc allows the driver to specify a default devloss_tmo value when
registering the remote port. The lpfc driver is currently not doing so,
although it is implementing a driver internal node loss value of 30s which
also is used on the SCSI FC remote port. As no devloss_tmo is set, the
nvme-fc transport defaults to 60s. So there are competing timers.
Additionally, due to the competing timers, it is possible the NVMe rport is
removed but the SCSI rport remains. It is possible that the SCSI FC rport,
which was registered for the NVMe port even if it doesn't utilize the SCSI
protocol, had been tuned to not match either the 60s (nvme-fc default) or
30s (lldd default), it gets out of whack. The lldd will defer to the SCSI
FC rport as long as the SCSI FC rport has not had its devloss_tmo expire.
Correct the situation by specifying a default devloss_tmo to the nvme-fc
transport when registering the rport. Take the value from the SCSI FC
rport if it exists, otherwise use the driver default.
Anton Blanchard [Mon, 13 Jul 2020 08:39:08 +0000 (18:39 +1000)]
scsi: lpfc: Quieten some printks
On a big box the lpfc driver emits a few thousand "Set Affinity" lines to
the console. Reduce the priority of these from KERN_ERR to KERN_INFO, and
also fix a few printks that had no log level.
Lee Jones [Mon, 13 Jul 2020 07:46:45 +0000 (08:46 +0100)]
scsi: qla4xxx: Provide a missing function param description and fix formatting
Kerneldoc function parameter references need to be in the format '@.*: ',
else the kerneldoc checker gets confused.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qla4xxx/ql4_init.c: In function ‘ql4xxx_set_mac_number’:
drivers/scsi/qla4xxx/ql4_init.c:17:10: warning: variable ‘func_number’ set but not used [-Wunused-but-set-variable]
drivers/scsi/qla4xxx/ql4_init.c: In function ‘qla4xxx_pci_config’:
drivers/scsi/qla4xxx/ql4_init.c:664:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
from drivers/scsi/qla4xxx/ql4_init.c:9:
from drivers/scsi/qla4xxx/ql4_init.c:9:
drivers/scsi/qla4xxx/ql4_init.c:953: warning: Function parameter or member 'is_reset' not described in 'qla4xxx_initialize_adapter'
drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'ha' not described in 'qla4xxx_process_ddb_changed'
drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'fw_ddb_index' not described in 'qla4xxx_process_ddb_changed'
drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'state' not described in 'qla4xxx_process_ddb_changed'
drivers/scsi/qla4xxx/ql4_init.c:1168: warning: Function parameter or member 'conn_err' not described in 'qla4xxx_process_ddb_changed'
Lee Jones [Mon, 13 Jul 2020 07:46:44 +0000 (08:46 +0100)]
scsi: aacraid: Fix a bunch of function doc formatting errors
And a few missing/excessive parameter descriptions.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'dev' not described in 'aac_get_config_status'
drivers/scsi/aacraid/aachba.c:358: warning: Function parameter or member 'commit_flag' not described in 'aac_get_config_status'
drivers/scsi/aacraid/aachba.c:358: warning: Excess function parameter 'common' description in 'aac_get_config_status'
drivers/scsi/aacraid/aachba.c:450: warning: Function parameter or member 'dev' not described in 'aac_get_containers'
drivers/scsi/aacraid/aachba.c:450: warning: Excess function parameter 'common' description in 'aac_get_containers'
drivers/scsi/aacraid/aachba.c:568: warning: Function parameter or member 'scsicmd' not described in 'aac_get_container_name'
drivers/scsi/aacraid/aachba.c:796: warning: Function parameter or member 'scsicmd' not described in 'aac_probe_container_callback1'
drivers/scsi/aacraid/aachba.c:796: warning: Excess function parameter 'dev' description in 'aac_probe_container_callback1'
drivers/scsi/aacraid/aachba.c:796: warning: Excess function parameter 'cid' description in 'aac_probe_container_callback1'
drivers/scsi/aacraid/aachba.c:1105: warning: Function parameter or member 'scsicmd' not described in 'aac_get_container_serial'
drivers/scsi/aacraid/aachba.c:1961: warning: Excess function parameter 'phys_luns' description in 'aac_set_safw_attr_all_targets'
drivers/scsi/aacraid/aachba.c:1961: warning: Excess function parameter 'rescan' description in 'aac_set_safw_attr_all_targets'
drivers/scsi/aacraid/aachba.c:3394: warning: Cannot understand *
on line 3394 - I thought it was a doc line
drivers/scsi/aacraid/aachba.c:3687: warning: Cannot understand *
on line 3687 - I thought it was a doc line
drivers/scsi/aacraid/aachba.c:3752: warning: Cannot understand *
on line 3752 - I thought it was a doc line
drivers/scsi/aacraid/aachba.c:3795: warning: Cannot understand *
on line 3795 - I thought it was a doc line
Link: https://lore.kernel.org/r/20200713074645.126138-29-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:46:43 +0000 (08:46 +0100)]
scsi: aic94xx: Repair kerneldoc formatting error and remove extra param
Function parameters need to be documented with format '@.*: '.
'to' is not longer asd_start_timers()'s function parameter.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aic94xx/aic94xx_hwi.c:589: warning: Function parameter or member 'asd_ha' not described in 'asd_init_ctxmem'
drivers/scsi/aic94xx/aic94xx_hwi.c:1157: warning: Excess function parameter 'to' description in 'asd_start_scb_timers'
Lee Jones [Mon, 13 Jul 2020 07:46:42 +0000 (08:46 +0100)]
scsi: pm8001: Demote obvious misuse of kerneldoc and update others
More bitrot issues with function documentation not keeping up with API changes.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/pm8001/pm8001_init.c:64: warning: cannot understand function prototype: 'const struct pm8001_chip_info pm8001_chips[] = '
drivers/scsi/pm8001/pm8001_init.c:86: warning: cannot understand function prototype: 'struct scsi_host_template pm8001_sht = '
drivers/scsi/pm8001/pm8001_init.c:115: warning: cannot understand function prototype: 'struct sas_domain_function_template pm8001_transport_ops = '
drivers/scsi/pm8001/pm8001_init.c:212: warning: Function parameter or member 'irq' not described in 'pm8001_interrupt_handler_msix'
drivers/scsi/pm8001/pm8001_init.c:237: warning: Function parameter or member 'irq' not described in 'pm8001_interrupt_handler_intx'
drivers/scsi/pm8001/pm8001_init.c:265: warning: Function parameter or member 'ent' not described in 'pm8001_alloc'
drivers/scsi/pm8001/pm8001_init.c:624: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_init_sas_add'
drivers/scsi/pm8001/pm8001_init.c:624: warning: Excess function parameter 'chip_info' description in 'pm8001_init_sas_add'
drivers/scsi/pm8001/pm8001_init.c:900: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_setup_msix'
drivers/scsi/pm8001/pm8001_init.c:900: warning: Excess function parameter 'chip_info' description in 'pm8001_setup_msix'
drivers/scsi/pm8001/pm8001_init.c:900: warning: Excess function parameter 'irq_handler' description in 'pm8001_setup_msix'
drivers/scsi/pm8001/pm8001_init.c:981: warning: Function parameter or member 'pm8001_ha' not described in 'pm8001_request_irq'
drivers/scsi/pm8001/pm8001_init.c:981: warning: Excess function parameter 'chip_info' description in 'pm8001_request_irq'
Link: https://lore.kernel.org/r/20200713074645.126138-27-lee.jones@linaro.org Cc: Kumar Santhanam <AnandKumar.Santhanam@pmcs.com> Cc: Sangeetha Gnanasekaran <Sangeetha.Gnanasekaran@pmcs.com> Cc: Nikith Ganigarakoppal <Nikith.Ganigarakoppal@pmcs.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:46:40 +0000 (08:46 +0100)]
scsi: aacraid: Fix a couple of small kerneldoc issues
Most likely caused by bitrot (docs not keeping in sync with API).
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aacraid/linit.c: In function ‘aac_biosparm’:
drivers/scsi/aacraid/linit.c:368:41: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
drivers/scsi/aacraid/linit.c:243: warning: Function parameter or member 'shost' not described in 'aac_queuecommand'
drivers/scsi/aacraid/linit.c:243: warning: Excess function parameter 'done' description in 'aac_queuecommand'
drivers/scsi/aacraid/linit.c:1176: warning: Excess function parameter 'inode' description in 'aac_cfg_ioctl'
Link: https://lore.kernel.org/r/20200713074645.126138-25-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:46:39 +0000 (08:46 +0100)]
scsi: aacraid: Provide suggested curly braces around empty body of if()
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aacraid/linit.c: In function ‘aac_biosparm’:
drivers/scsi/aacraid/linit.c:368:41: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
368 | param->heads, param->sectors, num));
| ^
Link: https://lore.kernel.org/r/20200713074645.126138-24-lee.jones@linaro.org Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: "PMC-Sierra, Inc" <aacraid@pmc-sierra.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:46:38 +0000 (08:46 +0100)]
scsi: qedf: Demote obvious misuse of kerneldoc to standard comment blocks
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qedf/qedf_debugfs.c:25: warning: Function parameter or member 'qedf' not described in 'qedf_dbg_host_init'
drivers/scsi/qedf/qedf_debugfs.c:25: warning: Function parameter or member 'dops' not described in 'qedf_dbg_host_init'
drivers/scsi/qedf/qedf_debugfs.c:25: warning: Function parameter or member 'fops' not described in 'qedf_dbg_host_init'
drivers/scsi/qedf/qedf_debugfs.c:25: warning: Excess function parameter 'pf' description in 'qedf_dbg_host_init'
drivers/scsi/qedf/qedf_debugfs.c:51: warning: Function parameter or member 'qedf_dbg' not described in 'qedf_dbg_host_exit'
drivers/scsi/qedf/qedf_debugfs.c:51: warning: Excess function parameter 'pf' description in 'qedf_dbg_host_exit'
drivers/scsi/qedf/qedf_debugfs.c:64: warning: Function parameter or member 'drv_name' not described in 'qedf_dbg_init'
Lee Jones [Mon, 13 Jul 2020 07:46:37 +0000 (08:46 +0100)]
scsi: aic7xxx: Fix 'amount_xferred' set but not used issue
'amount_xferred' is used, but only in certain circumstances. Place the
same stipulations on the defining/allocating of 'amount_xferred' as is
placed when using it.
We've been careful not to change any of the ordering semantics here.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aic7xxx/aic7xxx_osm.c: In function ‘ahc_done’:
drivers/scsi/aic7xxx/aic7xxx_osm.c:1725:12: warning: variable ‘amount_xferred’ set but not used [-Wunused-but-set-variable]
1725 | uint32_t amount_xferred;
| ^~~~~~~~~~~~~~
Link: https://lore.kernel.org/r/20200713074645.126138-22-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Cc: "Daniel M. Eischen" <deischen@iworks.InterWorks.org> Cc: Doug Ledford <dledford@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:46:36 +0000 (08:46 +0100)]
scsi: aic7xxx: Remove unused variable 'targ'
Looks like checking the 'targ' was removed in 2005.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aic7xxx/aic7xxx_osm.c: In function ‘ahc_send_async’:
drivers/scsi/aic7xxx/aic7xxx_osm.c:1604:28: warning: variable ‘targ’ set but not used [-Wunused-but-set-variable]
1604 | struct ahc_linux_target *targ;
| ^~~~
Link: https://lore.kernel.org/r/20200713074645.126138-21-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Cc: "Daniel M. Eischen" <deischen@iworks.InterWorks.org> Cc: Doug Ledford <dledford@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:46:35 +0000 (08:46 +0100)]
scsi: aic7xxx: Remove unused variable 'ahc'
Looks as though 'ahc' hasn't been used since 2005.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aic7xxx/aic7xxx_osm.c: In function ‘ahc_linux_slave_configure’:
drivers/scsi/aic7xxx/aic7xxx_osm.c:674:20: warning: variable ‘ahc’ set but not used [-Wunused-but-set-variable]
674 | struct ahc_softc *ahc;
| ^~~
Link: https://lore.kernel.org/r/20200713074645.126138-20-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Cc: "Daniel M. Eischen" <deischen@iworks.InterWorks.org> Cc: Doug Ledford <dledford@redhat.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:46:34 +0000 (08:46 +0100)]
scsi: aic7xxx: Remove unused variable 'tinfo'
Looks like none of the artifact from ahc_fetch_transinfo() are used anymore.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aic7xxx/aic7xxx_osm.c: In function ‘ahc_linux_target_alloc’:
drivers/scsi/aic7xxx/aic7xxx_osm.c:567:30: warning: variable ‘tinfo’ set but not used [-Wunused-but-set-variable]
567 | struct ahc_initiator_tinfo *tinfo;
| ^~~~~
Link: https://lore.kernel.org/r/20200713074645.126138-19-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.com> Cc: "Daniel M. Eischen" <deischen@iworks.InterWorks.org> Cc: Doug Ledford <dledford@redhat.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:46:33 +0000 (08:46 +0100)]
scsi: bnx2fc: Demote obvious misuse of kerneldoc to standard comment blocks
No attempt has been made to document either of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bnx2fc/bnx2fc_tgt.c:442: warning: Function parameter or member 'lport' not described in 'bnx2fc_rport_event_handler'
drivers/scsi/bnx2fc/bnx2fc_tgt.c:442: warning: Function parameter or member 'rdata' not described in 'bnx2fc_rport_event_handler'
drivers/scsi/bnx2fc/bnx2fc_tgt.c:442: warning: Function parameter or member 'event' not described in 'bnx2fc_rport_event_handler'
drivers/scsi/bnx2fc/bnx2fc_tgt.c:665: warning: Function parameter or member 'hba' not described in 'bnx2fc_alloc_session_resc'
drivers/scsi/bnx2fc/bnx2fc_tgt.c:665: warning: Function parameter or member 'tgt' not described in 'bnx2fc_alloc_session_resc'
Lee Jones [Mon, 13 Jul 2020 07:46:32 +0000 (08:46 +0100)]
scsi: qedf: Remove a whole host of unused variables
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_cmd_timeout’:
drivers/scsi/qedf/qedf_io.c:25:5: warning: variable ‘op’ set but not used [-Wunused-but-set-variable]
25 | u8 op = 0;
| ^~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_map_sg’:
drivers/scsi/qedf/qedf_io.c:490:12: warning: variable ‘end_addr’ set but not used [-Wunused-but-set-variable]
490 | u64 addr, end_addr;
| ^~~~~~~~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_post_io_req’:
drivers/scsi/qedf/qedf_io.c:863:22: warning: variable ‘req_type’ set but not used [-Wunused-but-set-variable]
863 | enum fcoe_task_type req_type = 0;
| ^~~~~~~~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_scsi_completion’:
drivers/scsi/qedf/qedf_io.c:1134:31: warning: variable ‘task_ctx’ set but not used [-Wunused-but-set-variable]
1134 | struct e4_fcoe_task_context *task_ctx;
| ^~~~~~~~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_scsi_done’:
drivers/scsi/qedf/qedf_io.c:1345:6: warning: variable ‘xid’ set but not used [-Wunused-but-set-variable]
1345 | u16 xid;
| ^~~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_initiate_abts’:
drivers/scsi/qedf/qedf_io.c:1866:6: warning: variable ‘r_a_tov’ set but not used [-Wunused-but-set-variable]
1866 | u32 r_a_tov = 0;
| ^~~~~~~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_process_abts_compl’:
drivers/scsi/qedf/qedf_io.c:1967:11: warning: variable ‘xid’ set but not used [-Wunused-but-set-variable]
1967 | uint16_t xid;
| ^~~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_initiate_cleanup’:
drivers/scsi/qedf/qedf_io.c:2163:31: warning: variable ‘task’ set but not used [-Wunused-but-set-variable]
2163 | struct e4_fcoe_task_context *task;
| ^~~~
drivers/scsi/qedf/qedf_io.c: In function ‘qedf_process_unsol_compl’:
drivers/scsi/qedf/qedf_io.c:2534:11: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
2534 | uint16_t tmp;
| ^~~
Lee Jones [Mon, 13 Jul 2020 07:46:30 +0000 (08:46 +0100)]
scsi: arcmsr: Remove some set but unused variables
Fixes the following W=1 kernel build warning(s):
drivers/scsi/arcmsr/arcmsr_hba.c: In function ‘arcmsr_remap_pciregion’:
drivers/scsi/arcmsr/arcmsr_hba.c:286:30: warning: variable ‘flags’ set but not used [-Wunused-but-set-variable]
286 | unsigned long addr, range, flags;
| ^~~~~
drivers/scsi/arcmsr/arcmsr_hba.c: In function ‘arcmsr_suspend’:
drivers/scsi/arcmsr/arcmsr_hba.c:1070:11: warning: variable ‘intmask_org’ set but not used [-Wunused-but-set-variable]
1070 | uint32_t intmask_org;
| ^~~~~~~~~~~
drivers/scsi/arcmsr/arcmsr_hba.c: In function ‘arcmsr_done4abort_postqueue’:
drivers/scsi/arcmsr/arcmsr_hba.c:1410:29: warning: variable ‘cdb_phy_hipart’ set but not used [-Wunused-but-set-variable]
1410 | unsigned long ccb_cdb_phy, cdb_phy_hipart;
| ^~~~~~~~~~~~~~
drivers/scsi/arcmsr/arcmsr_hba.c: In function ‘arcmsr_hbaD_postqueue_isr’:
drivers/scsi/arcmsr/arcmsr_hba.c:2448:36: warning: variable ‘cdb_phy_hipart’ set but not used [-Wunused-but-set-variable]
2448 | unsigned long flags, ccb_cdb_phy, cdb_phy_hipart;
| ^~~~~~~~~~~~~~
drivers/scsi/arcmsr/arcmsr_hba.c: In function ‘arcmsr_hbaD_polling_ccbdone’:
drivers/scsi/arcmsr/arcmsr_hba.c:3498:36: warning: variable ‘cdb_phy_hipart’ set but not used [-Wunused-but-set-variable]
3498 | unsigned long flags, ccb_cdb_phy, cdb_phy_hipart;
| ^~~~~~~~~~~~~~
Lee Jones [Mon, 13 Jul 2020 07:46:29 +0000 (08:46 +0100)]
scsi: bnx2fc: Fix a couple of bitrotted function documentation headers
Likely a result of documentation not keeping up with API updates (a.k.a. bitrot).
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bnx2fc/bnx2fc_hwi.c:493: warning: Function parameter or member 'hba' not described in 'bnx2fc_send_session_destroy_req'
drivers/scsi/bnx2fc/bnx2fc_hwi.c:493: warning: Excess function parameter 'port' description in 'bnx2fc_send_session_destroy_req'
drivers/scsi/bnx2fc/bnx2fc_hwi.c:1345: warning: Function parameter or member 'context' not described in 'bnx2fc_indicate_kcqe'
drivers/scsi/bnx2fc/bnx2fc_hwi.c:1345: warning: Function parameter or member 'kcq' not described in 'bnx2fc_indicate_kcqe'
drivers/scsi/bnx2fc/bnx2fc_hwi.c:1345: warning: Excess function parameter 'hba' description in 'bnx2fc_indicate_kcqe'
drivers/scsi/bnx2fc/bnx2fc_hwi.c:1345: warning: Excess function parameter 'kcqe' description in 'bnx2fc_indicate_kcqe'
Lee Jones [Mon, 13 Jul 2020 07:46:28 +0000 (08:46 +0100)]
scsi: libfc: Provide missing and repair existing function documentation
Mostly due to descriptions not keeping up with API changes.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/libfc/fc_fcp.c:299: warning: Function parameter or member 'status_code' not described in 'fc_fcp_retry_cmd'
drivers/scsi/libfc/fc_fcp.c:595: warning: Function parameter or member 'seq' not described in 'fc_fcp_send_data'
drivers/scsi/libfc/fc_fcp.c:595: warning: Excess function parameter 'sp' description in 'fc_fcp_send_data'
drivers/scsi/libfc/fc_fcp.c:1289: warning: Function parameter or member 't' not described in 'fc_lun_reset_send'
drivers/scsi/libfc/fc_fcp.c:1289: warning: Excess function parameter 'data' description in 'fc_lun_reset_send'
drivers/scsi/libfc/fc_fcp.c:1422: warning: Function parameter or member 't' not described in 'fc_fcp_timeout'
drivers/scsi/libfc/fc_fcp.c:1422: warning: Excess function parameter 'data' description in 'fc_fcp_timeout'
drivers/scsi/libfc/fc_fcp.c:1696: warning: Function parameter or member 'code' not described in 'fc_fcp_recovery'
drivers/scsi/libfc/fc_fcp.c:1716: warning: Function parameter or member 'offset' not described in 'fc_fcp_srr'
drivers/scsi/libfc/fc_fcp.c:1859: warning: Function parameter or member 'sc_cmd' not described in 'fc_queuecommand'
drivers/scsi/libfc/fc_fcp.c:1859: warning: Excess function parameter 'cmd' description in 'fc_queuecommand'
Lee Jones [Mon, 13 Jul 2020 07:46:27 +0000 (08:46 +0100)]
scsi: libfc: Fix a couple of misdocumented function parameters
Fixes the following W=1 kernel build warning(s):
drivers/scsi/libfc/fc_rport.c:129: warning: Function parameter or member 'port_id' not described in 'fc_rport_create'
drivers/scsi/libfc/fc_rport.c:129: warning: Excess function parameter 'ids' description in 'fc_rport_create'
drivers/scsi/libfc/fc_rport.c:1452: warning: Function parameter or member 'rdata_arg' not described in 'fc_rport_logo_resp'
drivers/scsi/libfc/fc_rport.c:1452: warning: Excess function parameter 'lport_arg' description in 'fc_rport_logo_resp'
Lee Jones [Mon, 13 Jul 2020 07:46:26 +0000 (08:46 +0100)]
scsi: libfc: Repair function parameter documentation
Either misdocumentation and/or bitrot.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/libfc/fc_lport.c:412: warning: Function parameter or member 'in_fp' not described in 'fc_lport_recv_echo_req'
drivers/scsi/libfc/fc_lport.c:412: warning: Excess function parameter 'fp' description in 'fc_lport_recv_echo_req'
drivers/scsi/libfc/fc_lport.c:447: warning: Function parameter or member 'in_fp' not described in 'fc_lport_recv_rnid_req'
drivers/scsi/libfc/fc_lport.c:447: warning: Excess function parameter 'fp' description in 'fc_lport_recv_rnid_req'
drivers/scsi/libfc/fc_lport.c:1330: warning: Function parameter or member 'state' not described in 'fc_lport_enter_ns'
drivers/scsi/libfc/fc_lport.c:1428: warning: Function parameter or member 'state' not described in 'fc_lport_enter_ms'
drivers/scsi/libfc/fc_lport.c:1939: warning: Function parameter or member 'tov' not described in 'fc_lport_els_request'
Lee Jones [Mon, 13 Jul 2020 07:46:25 +0000 (08:46 +0100)]
scsi: qedf: Remove set but not checked variable 'tmp'
Looks like the return value of readw() has never been checked.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qedf/qedf_main.c: In function ‘__qedf_probe’:
drivers/scsi/qedf/qedf_main.c:3203:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
Lee Jones [Mon, 13 Jul 2020 07:46:24 +0000 (08:46 +0100)]
scsi: qedf: Demote obvious misuse of kerneldoc to standard comment blocks
No attempt has been made to document either of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/qedf/qedf_main.c:1027: warning: Function parameter or member 'lport' not described in 'qedf_xmit'
drivers/scsi/qedf/qedf_main.c:1027: warning: Function parameter or member 'fp' not described in 'qedf_xmit'
drivers/scsi/qedf/qedf_main.c:1426: warning: Function parameter or member 'lport' not described in 'qedf_rport_event_handler'
drivers/scsi/qedf/qedf_main.c:1426: warning: Function parameter or member 'rdata' not described in 'qedf_rport_event_handler'
drivers/scsi/qedf/qedf_main.c:1426: warning: Function parameter or member 'event' not described in 'qedf_rport_event_handler'
Lee Jones [Mon, 13 Jul 2020 07:46:23 +0000 (08:46 +0100)]
scsi: bnx2fc: Repair a range of kerneldoc issues
>From bitrotted and missing function parameters to misuse of kerneldoc format.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1082: warning: Function parameter or member 'lport' not described in 'bnx2fc_update_src_mac'
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1082: warning: Function parameter or member 'addr' not described in 'bnx2fc_update_src_mac'
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1082: warning: Excess function parameter 'fip' description in 'bnx2fc_update_src_mac'
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1082: warning: Excess function parameter 'old' description in 'bnx2fc_update_src_mac'
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1082: warning: Excess function parameter 'new' description in 'bnx2fc_update_src_mac'
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1670: warning: Function parameter or member 'netdev' not described in 'bnx2fc_destroy'
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1670: warning: Excess function parameter 'buffer' description in 'bnx2fc_destroy'
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1670: warning: Excess function parameter 'kp' description in 'bnx2fc_destroy'
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2108: warning: Function parameter or member 'netdev' not described in 'bnx2fc_disable'
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2236: warning: Function parameter or member 'netdev' not described in 'bnx2fc_enable'
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2529: warning: Function parameter or member 'dev' not described in 'bnx2fc_ulp_exit'
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2962: warning: cannot understand function prototype: 'struct scsi_host_template bnx2fc_shost_template = '
drivers/scsi/bnx2fc/bnx2fc_fcoe.c:2996: warning: cannot understand function prototype: 'struct cnic_ulp_ops bnx2fc_cnic_cb = '
Lee Jones [Mon, 13 Jul 2020 07:46:22 +0000 (08:46 +0100)]
scsi: fcoe: Correct some kernel-doc issues
Mainly due to misdocumentation or bitrotted descriptions.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/fcoe/fcoe_transport.c:396: warning: Function parameter or member 'skb' not described in 'fcoe_check_wait_queue'
drivers/scsi/fcoe/fcoe_transport.c:447: warning: Function parameter or member 't' not described in 'fcoe_queue_timer'
drivers/scsi/fcoe/fcoe_transport.c:447: warning: Excess function parameter 'lport' description in 'fcoe_queue_timer'
drivers/scsi/fcoe/fcoe_transport.c:682: warning: Function parameter or member 'netdev' not described in 'fcoe_netdev_map_lookup'
Lee Jones [Mon, 13 Jul 2020 07:46:21 +0000 (08:46 +0100)]
scsi: fcoe: Fix a myriad of documentation issues
Mostly missing or incorrect (bitrotted) function parameters.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/fcoe/fcoe_ctlr.c:139: warning: Function parameter or member 'mode' not described in 'fcoe_ctlr_init'
drivers/scsi/fcoe/fcoe_ctlr.c:604: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_encaps'
drivers/scsi/fcoe/fcoe_ctlr.c:1312: warning: Function parameter or member 'skb' not described in 'fcoe_ctlr_recv_clr_vlink'
drivers/scsi/fcoe/fcoe_ctlr.c:1312: warning: Excess function parameter 'fh' description in 'fcoe_ctlr_recv_clr_vlink'
drivers/scsi/fcoe/fcoe_ctlr.c:1781: warning: Function parameter or member 't' not described in 'fcoe_ctlr_timeout'
drivers/scsi/fcoe/fcoe_ctlr.c:1781: warning: Excess function parameter 'arg' description in 'fcoe_ctlr_timeout'
drivers/scsi/fcoe/fcoe_ctlr.c:1904: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_recv_flogi'
drivers/scsi/fcoe/fcoe_ctlr.c:2166: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_stop_locked'
drivers/scsi/fcoe/fcoe_ctlr.c:2166: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_stop_locked'
drivers/scsi/fcoe/fcoe_ctlr.c:2188: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_stop'
drivers/scsi/fcoe/fcoe_ctlr.c:2188: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_stop'
drivers/scsi/fcoe/fcoe_ctlr.c:2204: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_stop_final'
drivers/scsi/fcoe/fcoe_ctlr.c:2204: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_stop_final'
drivers/scsi/fcoe/fcoe_ctlr.c:2273: warning: Function parameter or member 'frport' not described in 'fcoe_ctlr_vn_parse'
drivers/scsi/fcoe/fcoe_ctlr.c:2273: warning: Excess function parameter 'rdata' description in 'fcoe_ctlr_vn_parse'
drivers/scsi/fcoe/fcoe_ctlr.c:2804: warning: Function parameter or member 'frport' not described in 'fcoe_ctlr_vlan_parse'
drivers/scsi/fcoe/fcoe_ctlr.c:2804: warning: Excess function parameter 'rdata' description in 'fcoe_ctlr_vlan_parse'
drivers/scsi/fcoe/fcoe_ctlr.c:2900: warning: Excess function parameter 'min_len' description in 'fcoe_ctlr_vlan_send'
drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Function parameter or member 'fip' not described in 'fcoe_ctlr_vlan_recv'
drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Function parameter or member 'skb' not described in 'fcoe_ctlr_vlan_recv'
drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Excess function parameter 'lport' description in 'fcoe_ctlr_vlan_recv'
drivers/scsi/fcoe/fcoe_ctlr.c:2977: warning: Excess function parameter 'fp' description in 'fcoe_ctlr_vlan_recv'
drivers/scsi/fcoe/fcoe_ctlr.c:3033: warning: Function parameter or member 'callback' not described in 'fcoe_ctlr_disc_start'
drivers/scsi/fcoe/fcoe_ctlr.c:3033: warning: Function parameter or member 'lport' not described in 'fcoe_ctlr_disc_start'
drivers/scsi/fcoe/fcoe_ctlr.c:3033: warning: Excess function parameter 'fip' description in 'fcoe_ctlr_disc_start'
Lee Jones [Mon, 13 Jul 2020 07:46:20 +0000 (08:46 +0100)]
scsi: fcoe: Fix various kernel-doc infringements
A couple of headers make no attempt to document their associated function
parameters. Others looks as if they are suffering with a little bitrot.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/fcoe/fcoe.c:654: warning: Function parameter or member 'lport' not described in 'fcoe_netdev_features_change'
drivers/scsi/fcoe/fcoe.c:654: warning: Function parameter or member 'netdev' not described in 'fcoe_netdev_features_change'
drivers/scsi/fcoe/fcoe.c:2039: warning: Function parameter or member 'ctlr_dev' not described in 'fcoe_ctlr_mode'
drivers/scsi/fcoe/fcoe.c:2039: warning: Excess function parameter 'cdev' description in 'fcoe_ctlr_mode'
drivers/scsi/fcoe/fcoe.c:2144: warning: Function parameter or member 'fcoe' not described in 'fcoe_dcb_create'
drivers/scsi/fcoe/fcoe.c:2144: warning: Excess function parameter 'netdev' description in 'fcoe_dcb_create'
drivers/scsi/fcoe/fcoe.c:2144: warning: Excess function parameter 'port' description in 'fcoe_dcb_create'
drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'lport' not described in 'fcoe_elsct_send'
drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'did' not described in 'fcoe_elsct_send'
drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'fp' not described in 'fcoe_elsct_send'
drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'op' not described in 'fcoe_elsct_send'
drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'resp' not described in 'fcoe_elsct_send'
drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'arg' not described in 'fcoe_elsct_send'
drivers/scsi/fcoe/fcoe.c:2627: warning: Function parameter or member 'timeout' not described in 'fcoe_elsct_send'
Lee Jones [Mon, 13 Jul 2020 07:46:19 +0000 (08:46 +0100)]
scsi: libfc: trivial: Fix spelling mistake of 'discovery'
This is my fault (can't even blame copy/paste).
Link: https://lore.kernel.org/r/20200713074645.126138-4-lee.jones@linaro.org Cc: Hannes Reinecke <hare@suse.de> Reported-by: Johannes Thumshirn <Johannes.Thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Mon, 13 Jul 2020 07:46:18 +0000 (08:46 +0100)]
scsi: scsi_transport_fc: Match HBA Attribute Length with HBAAPI V2.0 definitions
According to 'include/scsi/scsi_transport_fc.h':
"Attributes are based on HBAAPI V2.0 definitions"
... so it seems sane to match the 'HBA Attribute Length' to them.
If we don't, the compiler complains that the copied data will be truncated.
Fixes the following W=1 kernel build warning(s):
In file included from include/linux/bitmap.h:9,
from include/linux/cpumask.h:12,
from include/linux/smp.h:13,
from include/linux/percpu.h:7,
from include/scsi/libfc.h:13,
from drivers/scsi/libfc/fc_elsct.c:17:
In function ‘strncpy’,
inlined from ‘fc_ct_ms_fill.constprop’ at include/scsi/fc_encode.h:263:3:
include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output may be truncated copying 64 bytes from a string of length 79 [-Wstringop-truncation]
297 | #define __underlying_strncpy __builtin_strncpy
| ^
include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’
307 | return __underlying_strncpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~~
In function ‘strncpy’,
inlined from ‘fc_ct_ms_fill.constprop’ at include/scsi/fc_encode.h:275:3:
include/linux/string.h:297:30: warning: ‘__builtin_strncpy’ output may be truncated copying 64 bytes from a string of length 79 [-Wstringop-truncation]
297 | #define __underlying_strncpy __builtin_strncpy
| ^
include/linux/string.h:307:9: note: in expansion of macro ‘__underlying_strncpy’
307 | return __underlying_strncpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~~
Lee Jones [Mon, 13 Jul 2020 07:46:17 +0000 (08:46 +0100)]
scsi: libfc: Supply some missing kerneldoc struct/function attributes/params
Fixes the following W=1 kernel build warning(s):
drivers/scsi/libfc/fc_exch.c:66: warning: Function parameter or member 'left' not described in 'fc_exch_pool'
drivers/scsi/libfc/fc_exch.c:66: warning: Function parameter or member 'right' not described in 'fc_exch_pool'
drivers/scsi/libfc/fc_exch.c:100: warning: Function parameter or member 'lport' not described in 'fc_exch_mgr'
drivers/scsi/libfc/fc_exch.c:727: warning: Function parameter or member 'ep' not described in 'fc_invoke_resp'
drivers/scsi/libfc/fc_exch.c:727: warning: Function parameter or member 'sp' not described in 'fc_invoke_resp'
drivers/scsi/libfc/fc_exch.c:727: warning: Function parameter or member 'fp' not described in 'fc_invoke_resp'
Douglas Gilbert [Sun, 12 Jul 2020 18:29:27 +0000 (14:29 -0400)]
scsi: scsi_debug: Update documentation url and bump version
This driver maintains a version number which is cross-referenced in the
documentation (e.g. to indicate when features are added or changed) and
exposed through the responses to various SCSI commands. For example the
version number is use as the Product Revision number in standard SCSI
INQUIRY responses issued by this driver. The version date string is placed
in a vendor specific area in each standard SCSI INQUIRY response. This
patch bumps both.
Update the driver documentation URL that appears at the top of the driver
source file.
This patch simplifies, or at least makes more consistent, the way setting
the every_nth parameter injects errors. Here is a list of 'opts' flags and
in which cases they inject errors when abs(every_nth)%command_count == 0 is
reached:
- OPT_RECOVERED_ERR: issued on READ(*)s, WRITE(*)s and
WRITE_SCATTEREDs
- OPT_DIF_ERR: issued on READ(*)s, WRITE(*)s and
WRITE_SCATTEREDs
- OPT_DIX_ERR: issued on READ(*)s, WRITE(*)s and
WRITE_SCATTEREDs
- OPT_SHORT_TRANSFER: issued on READ(*)s
- OPT_TRANSPORT_ERR: issued on all commands
- OPT_CMD_ABORT: issued on all commands
The other uses of every_nth were not modified.
Previously if, for example, OPT_SHORT_TRANSFER was armed then if
(abs(every_nth) % command_count == 0) occurred during a command that was
_not_ a READ, then no error injection occurred. This behaviour puzzled
several testers. Now a global "inject_pending" flag is set and the _next_
READ will get hit and that flag is cleared. OPT_RECOVERED_ERR, OPT_DIF_ERR
and OPT_DIX_ERR have similar behaviour. A downside of this is that there
might be a hang-over pending injection that gets triggered by a following
test.
Also expand the every_nth runtime parameter so that it can take hex value
(i.e. with a leading '0x') as well as a decimal value. Now both the 'opts'
and the 'every_nth' runtime parameters can take hexadecimal values.
John Garry [Thu, 9 Jul 2020 12:23:20 +0000 (20:23 +0800)]
scsi: scsi_debug: Support hostwide tags
Many SCSI HBAs support a hostwide tagset, whereby each command submitted to
the HW from all submission queues must have a unique tag identifier.
Normally this unique tag will be in the range [0, max queue], where "max
queue" is the depth of each of the submission queues.
Add support for this hostwide tag feature, via module parameter
"host_max_queue". A non-zero value means that the feature is enabled. In
this case, the submission queues are not exposed to upper layer, i.e. from
blk-mq prespective, the device has a single hw queue. There are 2 reasons
for this:
a. It is assumed that the host can support nr_hw_queues * can_queue
commands, but this is not true for hostwide tags
b. For nr_hw_queues != 0, the request tag is not unique over all HW
queues, and some HBA drivers want to use this tag for the hostwide tag
However, like many SCSI HBA drivers today - megaraid sas being an example -
the full set of HW submission queues are still used in the LLDD driver. So
instead of using a complicated "reply_map" to create a per-CPU submission
queue mapping like megaraid_sas (as it depends on a PCI device + MSIs) -
use a simple algorithm:
hwq = cpu % queue count
If the host_max_queue param is set non-zero, then the max queue depth is
fixed at this value also.
If and when hostwide shared tags are supported in blk-mq/scsi mid-layer,
then the policy to set nr_hw_queues = 0 for hostwide tags can be revised.
So add checks for these, and fail the module init for those cases.
[mkp: changed if condition to match error message]
Link: https://lore.kernel.org/r/1594297400-24756-2-git-send-email-john.garry@huawei.com Fixes: c483739430f1 ("scsi_debug: add multiple queue support") Reviewed-by: Ming Lei <ming.lei@redhat.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stanley Chu [Sun, 12 Jul 2020 00:32:26 +0000 (08:32 +0800)]
scsi: ufs-mediatek: Add inline encryption support
Add inline encryption support to ufs-mediatek.
The standards-compliant parts, such as querying the crypto capabilities and
enabling crypto for individual UFS requests, are already handled by
ufshcd-crypto.c, which itself is wired into the blk-crypto framework.
However MediaTek UFS host requires a vendor-specific hce_enable operation
to allow crypto-related registers being accessed normally in kernel. After
this step, MediaTek UFS host can work as standard-compliant host for
inline-encryption related functions.
Dan Carpenter [Mon, 13 Jul 2020 10:51:00 +0000 (10:51 +0000)]
scsi: cxgb4i: Clean up a debug printk
The pr_fmt() at the top of the file already includes the __func__ so we can
remove the duplicative "cxgbi_conn_init_pdu:" from the string here. Now it
all fits on one line as well.
Link: https://lore.kernel.org/r/20200713105100.GA251988@mwanda Acked-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
kmem_cache_destroy() and mempool_destroy() both correctly handle null
pointer parameters. There is no need to check if the parameter is null
before calling these functions.
Colin Ian King [Thu, 9 Jul 2020 13:52:17 +0000 (14:52 +0100)]
scsi: cxgb4i: Fix dereference of pointer tdata before it is null checked
Currently pointer tdata is being dereferenced on the initialization of
pointer skb before tdata is null checked. This could lead to a potential
null pointer dereference. Fix this by dereferencing tdata after tdata has
been null pointer sanity checked.
Link: https://lore.kernel.org/r/20200709135217.1408105-1-colin.king@canonical.com Fixes: e33c2482289b ("scsi: cxgb4i: Add support for iSCSI segmentation offload")
Addresses-Coverity: ("Dereference before null check") Acked-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
drivers/target/target_core_pr.c:1162:26: warning:
variable 'tpg' set but not used [-Wunused-but-set-variable]
1162 | struct se_portal_group *tpg;
| ^~~
After commit 63c9ffe473d3 ("scsi: target: Check enforce_pr_isids during
registration"), 'tpg' is never used. Remove it to avoid build warning.
Link: https://lore.kernel.org/r/20200709114636.69256-1-weiyongjun1@huawei.com Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stanley Chu [Mon, 6 Jul 2020 06:07:07 +0000 (14:07 +0800)]
scsi: ufs: Fix and simplify setup_xfer_req variant operation
Add missing setup_xfer_req() call in ufshcd_issue_devman_upiu_cmd() in
ufs-bsg path. Relocate existing setup_xfer_req() calls to a common place,
i.e., ufshcd_send_command(), to simplify the driver.
Varun Prakash [Mon, 29 Jun 2020 16:41:11 +0000 (22:11 +0530)]
scsi: cxgb4i: Add support for iSCSI segmentation offload
T5/T6 adapters support iSCSI segmentation offload.
To transmit iSCSI PDUs using ISO driver provides iSCSI header and data
scatterlist to the adapter, adapter forms multiple iSCSI PDUs and transmits
them.
Andres Beltran [Mon, 6 Jul 2020 16:09:28 +0000 (12:09 -0400)]
scsi: storvsc: Add validation for untrusted Hyper-V values
For additional robustness in the face of Hyper-V errors or malicious
behavior, validate all values that originate from packets that Hyper-V has
sent to the guest. Ensure that invalid values cannot cause data being
copied out of the bounds of the source buffer when calling memcpy. Ensure
that outgoing packets do not have any leftover guest memory that has not
been zeroed out.
Link: https://lore.kernel.org/r/20200706160928.53049-1-lkmlabelt@gmail.com Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andres Beltran <lkmlabelt@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dick Kennedy [Mon, 6 Jul 2020 20:42:46 +0000 (13:42 -0700)]
scsi: lpfc: Fix less-than-zero comparison of unsigned value
The expression start_idx - dbg_cnt is evaluated using unsigned int
arthithmetic (since these variables are unsigned ints) and hence can never
be less than zero, so the less than comparison is never true. Rewrite the
expression to check for start_idx being less than dbg_cnt.
After the logic was corrected, temp_idx wasn't working correctly. So fix it
as well.
Link: https://lore.kernel.org/r/20200706204246.130416-1-jsmart2021@gmail.com Fixes: 372c187b8a70 ("scsi: lpfc: Add an internal trace log buffer") CC: Colin Ian King <colin.king@canonical.com> Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Addresses-Coverity: ("Unsigned compared against 0")
Dick Kennedy [Mon, 6 Jul 2020 20:42:30 +0000 (13:42 -0700)]
scsi: lpfc: Fix interrupt assignments when multiple vectors are supported on same CPU
With certain platforms its possible pci_alloc_irq_vectors() may affinitize
irq vectors to multiple (all?) CPUs. The driver is currently assuming
exclusivity and vectors being doled out to different CPUs and is assigning
primary ownership of each vector to the first CPU in the mask. The code
doesn't bother to check if the CPU already owns a vector and will
unconditionally overwrite the CPU to vector mapping. This causes the
relationships between eq's and cq's to get confused and gets worse when
CPUs start to offline. The net results are interrupts are skipped resulting
in mailbox timeouts and there are oopses in CPU offling flows.
Fix this changing up the primary vector assignment. Now assign the eq to a
CPU only if it is the CPU in the mask that does not have a prior
assignment. And once the primary ownership is assigned, break from the
loop. For CPUs that may have been set before but not the primary owner, the
lpfc_cpu_affinity_check() routine will balance the CPU to eq assignment.
Wire up ufshcd.c with the UFS Crypto API, the block layer inline encryption
additions and the keyslot manager.
Many existing inline crypto devices require some additional behaviour not
specified in the UFSHCI v2.1 specification - as such the vendor specific
drivers will need to be updated where necessary to make it possible to use
those devices. Some of these changes have already been proposed upstream,
such as for the Qualcomm 845 SoC at
https://lkml.kernel.org/linux-scsi/20200501045111.665881-1-ebiggers@kernel.org/
and for ufs-mediatek at
https://lkml.kernel.org/linux-scsi/20200304022101.14165-1-stanley.chu@mediatek.com/
This patch has been tested on the db845c, sm8150-mtp and sm8250-mtp
(which have Qualcomm chipsets) and on some mediatek chipsets using these
aforementioned vendor specific driver updates.
Link: https://lore.kernel.org/r/20200706200414.2027450-4-satyat@google.com Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Satya Tangirala <satyat@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Introduce functions to manipulate UFS inline encryption hardware in line
with the JEDEC UFSHCI v2.1 specification and to work with the block keyslot
manager.
The UFS crypto API will assume by default that a vendor driver doesn't
support UFS crypto, even if the hardware advertises the capability, because
a lot of hardware requires some special handling that's not specified in
the aforementioned JEDEC spec. Each vendor driver must explicitly set
hba->caps |= UFSHCD_CAP_CRYPTO before ufshcd_hba_init_crypto_capabilities()
is called to opt-in to UFS crypto support.
Link: https://lore.kernel.org/r/20200706200414.2027450-3-satyat@google.com Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Satya Tangirala <satyat@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the crypto registers and structs defined in v2.1 of the JEDEC UFSHCI
specification in preparation to add support for inline encryption to UFS.
Link: https://lore.kernel.org/r/20200706200414.2027450-2-satyat@google.com Reviewed-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Satya Tangirala <satyat@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Lee Jones [Tue, 7 Jul 2020 14:00:54 +0000 (15:00 +0100)]
scsi: libfc: fc_disc: Fix-up some incorrectly referenced function parameters
Fixes the following W=1 kernel build warning(s):
drivers/scsi/libfc/fc_disc.c:343: warning: Function parameter or member 'disc' not described in 'fc_disc_gpn_ft_req'
drivers/scsi/libfc/fc_disc.c:343: warning: Excess function parameter 'lport' description in 'fc_disc_gpn_ft_req'
drivers/scsi/libfc/fc_disc.c:380: warning: Function parameter or member 'disc' not described in 'fc_disc_gpn_ft_parse'
drivers/scsi/libfc/fc_disc.c:380: warning: Excess function parameter 'lport' description in 'fc_disc_gpn_ft_parse'
drivers/scsi/libfc/fc_disc.c:498: warning: Function parameter or member 'disc_arg' not described in 'fc_disc_gpn_ft_resp'
drivers/scsi/libfc/fc_disc.c:498: warning: Excess function parameter 'lp_arg' description in 'fc_disc_gpn_ft_resp'
There is no need to populate an unused variable, even if the read is
required.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/pcmcia/nsp_cs.c: In function ‘nsp_cs_message’:
drivers/scsi/pcmcia/nsp_cs.c:143:2: warning: function ‘nsp_cs_message’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
drivers/scsi/pcmcia/nsp_cs.c: In function ‘nsp_fifo_count’:
drivers/scsi/pcmcia/nsp_cs.c:692:24: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
Lee Jones [Tue, 7 Jul 2020 14:00:52 +0000 (15:00 +0100)]
scsi: pcmcia: nsp_cs: Use new __printf() format notation
Fixes the following W=1 kernel build warning(s):
drivers/scsi/pcmcia/nsp_cs.c: In function ‘nsp_cs_message’:
drivers/scsi/pcmcia/nsp_cs.c:143:2: warning: function ‘nsp_cs_message’ might be a candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
drivers/scsi/pcmcia/nsp_cs.c: In function ‘nsp_fifo_count’:
drivers/scsi/pcmcia/nsp_cs.c:692:24: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable]
Lee Jones [Tue, 7 Jul 2020 14:00:51 +0000 (15:00 +0100)]
scsi: aha152x: Remove unused variable 'ret'
Looks to be unused since 2014.
Fixes the following W=1 kernel build warning(s):
drivers/scsi/aha152x.c: In function ‘datai_run’:
drivers/scsi/aha152x.c:2033:9: warning: variable ‘data’ set but not used [-Wunused-but-set-variable]
2033 | int data;
| ^~~~
Lee Jones [Tue, 7 Jul 2020 14:00:48 +0000 (15:00 +0100)]
scsi: fdomain: Mark 'fdomain_pm_ops' as __maybe_unused
Not all source files which include 'fdomain.h' make use of 'fdomain_pm_ops'
leaving them defined but unused. Mark it as __maybe_unused to tell the
compiler this is not only acceptable, but expected.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/scsi/pcmcia/fdomain_cs.c:16:
drivers/scsi/fdomain.h:106:32: warning: ‘fdomain_pm_ops’ defined but not used [-Wunused-const-variable=]
106 | static const struct dev_pm_ops fdomain_pm_ops;
| ^~~~~~~~~~~~~~
Bean Huo [Mon, 6 Jul 2020 12:39:36 +0000 (14:39 +0200)]
scsi: ufs: Change upiu_flags to be u8
According to the UFS Spec, the Flags field in the UPIU is one byte in size,
not 4. Change it to be u8.
Link: https://lore.kernel.org/r/20200706123936.24799-1-huobean@gmail.com Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Damien Le Moal [Mon, 6 Jul 2020 12:33:56 +0000 (21:33 +0900)]
scsi: mpt3sas: Fix set but unused variable
In _config_request(), the variable issue_reset is set using the macro
mpt3sas_check_cmd_timeout() but otherwise unused, causing a compiler
warning when compiling with W=1. Avoid this warning by removing this
variable, using the function mpt3sas_base_check_cmd_timeout() directly
instead of the mpt3sas_check_cmd_timeout() macro.
projects / kernel.git / log