GCC does not like having a partially allocated object, since it cannot
reason about it for bounds checking when it is passed to other code.
Instead, fully allocate sig_inputArgs. (Alternatively, sig_inputArgs
should be defined as a struct coda_in_hdr, if it is actually not using
any other part of the union.) Seen under GCC 13:
../fs/coda/upcall.c: In function 'coda_upcall':
../fs/coda/upcall.c:801:22: warning: array subscript 'union inputArgs[0]' is partly outside array bounds of 'unsigned char[20]' [-Warray-bounds=]
801 | sig_inputArgs->ih.opcode = CODA_SIGNAL;
| ^~
Multiple Ideapad Z570 variants need acpi_backlight=native to force native
use on these pre Windows 8 machines since acpi_video backlight control
does not work here.
The original DMI quirk matches on a product_name of "102434U" but other
variants may have different product_name-s such as e.g. "1024D9U".
Move to checking product_version instead as is more or less standard for
Lenovo DMI quirks for similar reasons.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Occasionnaly we may get oversized packets from the hardware which
exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early
check which drops the packet to avoid invoking skb_over_panic() and move
on to processing the next packet.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
This prevents CONFIG_FUNCTION_ALIGNMENT and
CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B from having their expected effect
on the ACPICA code. This is doubly unfortunate as in subsequent patches
arm64 will depend upon CONFIG_FUNCTION_ALIGNMENT for its ftrace
implementation.
Drop the '-Os' flag when building the ACPICA code. With this removed,
the code builds cleanly and works correctly in testing so far.
I've tested this by selecting CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y,
building and booting a kernel using ACPI, and looking for misaligned
text symbols:
With the patch applied, the remaining unaligned text labels are a
combination of static call trampolines and labels in assembly, which can
be dealt with in subsequent patches.
Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Florent Revest <revest@chromium.org> Cc: Len Brown <lenb@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Will Deacon <will@kernel.org> Cc: linux-acpi@vger.kernel.org Link: https://lore.kernel.org/r/20230123134603.1064407-4-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
There were a few places we had missed checking the VSI type to make sure
it was definitely a PF VSI, before calling setup functions intended only
for the PF VSI.
This doesn't fix any explicit bugs but cleans up the code in a few
places and removes one explicit != vsi->type check that can be
superseded by this code (it's a super set)
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
__inet_hash_connect() has a fast path taken if sk_head(&tb->owners) is
equal to the sk parameter.
sk_head() returns the hlist_entry() with respect to the sk_node field.
However entries in the tb->owners list are inserted with respect to the
sk_bind_node field with sk_add_bind_node().
Thus the check would never pass and the fast path never execute.
This fast path has never been executed or tested as this bug seems
to be present since commit 1da177e4c3f4 ("Linux-2.6.12-rc2"), thus
remove it to reduce code complexity.
Fix an integer underflow that leads to a null pointer dereference in
'mt7601u_rx_skb_from_seg()'. The variable 'dma_len' in the URB packet
could be manipulated, which could trigger an integer underflow of
'seg_len' in 'mt7601u_rx_process_seg()'. This underflow subsequently
causes the 'bad_frame' checks in 'mt7601u_rx_skb_from_seg()' to be
bypassed, eventually leading to a dereference of the pointer 'p', which
is a null pointer.
Ensure that 'dma_len' is greater than 'min_seg_len'.
Fix a stack-out-of-bounds read in brcmfmac that occurs
when 'buf' that is not null-terminated is passed as an argument of
strreplace() in brcmf_c_preinit_dcmds(). This buffer is filled with
a CLM version string by memcpy() in brcmf_fil_iovar_data_get().
Ensure buf is null-terminated.
Currently, x86_spec_ctrl_base is read at boot time and speculative bits
are set if Kconfig items are enabled. For example, IBRS is enabled if
CONFIG_CPU_IBRS_ENTRY is configured, etc. These MSR bits are not cleared
if the mitigations are disabled.
This is a problem when kexec-ing a kernel that has the mitigation
disabled from a kernel that has the mitigation enabled. In this case,
the MSR bits are not cleared during the new kernel boot. As a result,
this might have some performance degradation that is hard to pinpoint.
This problem does not happen if the machine is (hard) rebooted because
the bit will be cleared by default.
The nanosleep syscalls use the restart_block mechanism, with a quirk:
The `type` and `rmtp`/`compat_rmtp` fields are set up unconditionally on
syscall entry, while the rest of the restart_block is only set up in the
unlikely case that the syscall is actually interrupted by a signal (or
pseudo-signal) that doesn't have a signal handler.
If the restart_block was set up by a previous syscall (futex(...,
FUTEX_WAIT, ...) or poll()) and hasn't been invalidated somehow since then,
this will clobber some of the union fields used by futex_wait_restart() and
do_restart_poll().
If userspace afterwards wrongly calls the restart_syscall syscall,
futex_wait_restart()/do_restart_poll() will read struct fields that have
been clobbered.
This doesn't actually lead to anything particularly interesting because
none of the union fields contain trusted kernel data, and
futex(..., FUTEX_WAIT, ...) and poll() aren't syscalls where it makes much
sense to apply seccomp filters to their arguments.
So the current consequences are just of the "if userspace does bad stuff,
it can damage itself, and that's not a problem" flavor.
But still, it seems like a hazard for future developers, so invalidate the
restart_block when partly setting it up in the nanosleep syscalls.
The return value from the call to intel_tcc_get_tjmax() is int, which can
be a negative error code. However, the return value is being assigned to
an u32 variable 'tj_max', so making 'tj_max' an int.
Eliminate the following warning:
./drivers/thermal/intel/intel_soc_dts_iosf.c:394:5-11: WARNING: Unsigned expression compared with zero: tj_max < 0
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3637 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Acked-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The normal grace period's RCU CPU stall warnings are invoked from the
scheduling-clock interrupt handler, and can thus invoke smp_processor_id()
with impunity, which allows them to directly invoke dump_cpu_task().
In contrast, the expedited grace period's RCU CPU stall warnings are
invoked from process context, which causes the dump_cpu_task() function's
calls to smp_processor_id() to complain bitterly in debug kernels.
This commit therefore causes synchronize_rcu_expedited_wait() to disable
preemption around its call to dump_cpu_task().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This patch fixes a stack-out-of-bounds read in brcmfmac that occurs
when 'buf' that is not null-terminated is passed as an argument of
strsep() in brcmf_c_preinit_dcmds(). This buffer is filled with a firmware
version string by memcpy() in brcmf_fil_iovar_data_get().
The patch ensures buf is null-terminated.
Reported-by: Dokyung Song <dokyungs@yonsei.ac.kr> Reported-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Reported-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: Jisoo Jang <jisoo.jang@yonsei.ac.kr> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221115043458.37562-1-jisoo.jang@yonsei.ac.kr Signed-off-by: Sasha Levin <sashal@kernel.org>
calc_lcoefs() uses the input value of cost.model in DIV_ROUND_UP_ULL,
overflow would happen if bps plus IOC_PAGE_SIZE is greater than
ULLONG_MAX, it can cause divide by 0 error.
For some reason, the driver adding support for Exynos5420 MIPI phy
back in 2016 wasn't used on Exynos5420, which caused a kernel panic.
Add the proper compatible for it.
In the event that an intent advertisement arrives on an unknown channel
the fifo is not advanced, resulting in the same message being handled
over and over.
Fixes: e4d845bba4c1 ("rpmsg: glink: Receive and store the remote intent buffers") Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com> Reviewed-by: Chris Lew <quic_clew@quicinc.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230214234231.2069751-1-quic_bjorande@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When smscore_start_device() gets failed, the function smsusb_term_device()
will be called and smsusb_device_t will be deallocated. Although we use
usb_kill_urb() in smsusb_stop_streaming() to cancel transfer requests
and wait for them to finish, the worker threads that are scheduled by
smsusb_onresponse() may be still running. As a result, the UAF bugs
could happen.
We add cancel_work_sync() in smsusb_stop_streaming() in order that the
worker threads could finish before the smsusb_device_t is deallocated.
When the ene device is detaching, function ene_remove() will
be called. But there is no function to cancel tx_sim_timer
in ene_remove(), the timer handler ene_tx_irqsim() could race
with ene_remove(). As a result, the UAF bugs could happen,
the process is shown below.
Fix by adding del_timer_sync(&dev->tx_sim_timer) in ene_remove(),
The tx_sim_timer could stop before ene device is deallocated.
What's more, The rc_unregister_device() and del_timer_sync()
should be called first in ene_remove() and the deallocated
functions such as free_irq(), release_region() and so on
should be called behind them. Because the rc_unregister_device()
is well synchronized. Otherwise, race conditions may happen. The
situations that may lead to race conditions are shown below.
Firstly, the rx receiver is disabled with ene_rx_disable()
before rc_unregister_device() in ene_remove(), which means it
can be enabled again if a process opens /dev/lirc0 between
ene_rx_disable() and rc_unregister_device().
Secondly, the irqaction descriptor is freed by free_irq()
before the rc device is unregistered, which means irqaction
descriptor may be accessed again after it is deallocated.
Thirdly, the timer can call ene_tx_sample() that can write
to the io ports, which means the io ports could be accessed
again after they are deallocated by release_region().
Therefore, the rc_unregister_device() and del_timer_sync()
should be called first in ene_remove().
The reason is that if priv->hdl.error is set, ov772x_probe() jumps to the
error_mutex_destroy without doing v4l2_ctrl_handler_free(), and all
resources allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std()
are leaked.
ov5675_init_controls() won't clean all the allocated resources in fail
path, which may causes the memleaks. Add v4l2_ctrl_handler_free() to
prevent memleak.
Fixes: cb63633b9e8c ("media: ov5675: Add support for OV5675 sensor") Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
This was likely supposed to be '-Wa,-a$(BITS)'. However, this change is
unnecessary, as all supported versions of clang and gcc will pass '-a64'
or '-a32' to GNU as based on the value of '-m'; the behavior of the
latest stable release of the oldest supported major version of each
compiler is shown below and each compiler's latest release exhibits the
same behavior (GCC 12.2.0 and Clang 15.0.6).
$ powerpc64-linux-gcc --version | head -1
powerpc64-linux-gcc (GCC) 5.5.0
Any access to the dynamically allocated metadata region by the application
processor after assigning it to the remote Q6 will result in a XPU
violation. Fix this by replacing the dynamically allocated memory region
with a no-map carveout and unmap the modem metadata memory region before
passing control to the remote Q6.
Reported-and-tested-by: Amit Pundir <amit.pundir@linaro.org> Fixes: a2ed97bf0e19 ("remoteproc: qcom: Make secure world call for mem ownership switch") Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20230117085840.32356-7-quic_sibis@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
When neither LANTIQ nor MIPS_MALTA is set, 'physical_memsize' is not
declared. This causes the build to fail with:
mips-linux-ld: arch/mips/kernel/vpe-mt.o: in function `vpe_run':
arch/mips/kernel/vpe-mt.c:(.text.vpe_run+0x280): undefined reference to `physical_memsize'
LANTIQ is not using 'physical_memsize' and MIPS_MALTA's use of it is
self-contained in mti-malta/malta-dtshim.c.
Use of physical_memsize in vpe-mt.c appears to be unused, so eliminate
this loader mode completely and require VPE programs to be compiled with
DFLT_STACK_SIZE and DFLT_HEAP_SIZE defined.
Fixes: e4a0ddf8b0b0 ("MIPS: lantiq: Set physical_memsize") Fixes: c463e94ccf54 ("MIPS: APRP: Split VPE loader into separate files.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/all/202302030625.2g3E98sY-lkp@intel.com/ Cc: Dengcheng Zhu <dzhu@wavecomp.com> Cc: John Crispin <john@phrozen.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Philippe Mathieu-Daudé <philmd@linaro.org> Cc: "Steven J. Hill" <Steven.Hill@imgtec.com> Cc: Qais Yousef <Qais.Yousef@imgtec.com> Cc: Yang Yingliang <yangyingliang@huawei.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
When MIPS_CPS=y, MIPS_CPS_PM is not set, HOTPLUG_CPU is not set, and
KEXEC=y, cps_shutdown_this_cpu() attempts to call cps_pm_enter_state(),
which is not built when MIPS_CPS_PM is not set.
Conditionally execute the else branch based on CONFIG_HOTPLUG_CPU
to remove the build error.
This build failure is from a randconfig file.
mips-linux-ld: arch/mips/kernel/smp-cps.o: in function `$L162':
smp-cps.c:(.text.cps_kexec_nonboot_cpu+0x31c): undefined reference to `cps_pm_enter_state'
Fixes: 1524c02cd65a ("MIPS: kexec: CPS systems to halt nonboot CPUs") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Dengcheng Zhu <dzhu@wavecomp.com> Cc: Paul Burton <paulburton@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Cc: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a PCI error is encountered 6th time in an hour we
set the channel state to perm_failure and notify the
driver about the permanent failure.
However, after upstream commit 57d8ee8925f4 ("powerpc/eeh:
Make permanently failed devices non-actionable"), EEH handler
stops calling any routine once the device is marked as
permanent failure. This issue can lead to fatal consequences
like kernel hang with certain PCI devices.
Following log is observed with lpfc driver, with and without
this change, Without this change kernel hangs, If PCI error
is encountered 6 times for a device in an hour.
Without the change
EEH: Beginning: 'error_detected(permanent failure)'
PCI 0132:60:00.0#600000: EEH: not actionable (1,1,1)
PCI 0132:60:00.1#600000: EEH: not actionable (1,1,1)
EEH: Finished:'error_detected(permanent failure)'
The control flow of eeh_handle_normal_event() is a bit tricky.
Break out one of the error handling paths - rather than be in an else
block, we'll make it part of the regular body of the function and put a
'goto out;' in the true limb of the if.
Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211015070628.1331635-1-dja@axtens.net
Stable-dep-of: 9efcdaac36e1 ("powerpc/eeh: Set channel state after notifying the drivers") Signed-off-by: Sasha Levin <sashal@kernel.org>
4KB is the greatest alignment required by PAPR for such
buffers. rtas_data_buf used to have a __page_aligned attribute in the
arch/ppc64 days, but that was changed to __cacheline_aligned for
unknown reasons by commit dbb3d2cc0533 ("powerpc: Merge rtas.c into
arch/powerpc/kernel"). That works out to 128-byte alignment
on ppc64, which isn't right.
This was found by inspection and I'm not aware of any real problems
caused by this. Either current RTAS implementations don't enforce the
alignment constraints, or rtas_data_buf is always being placed at a
4KB boundary by accident (or both, perhaps).
Use __aligned(SZ_4K) to ensure the rtas_data_buf has alignment
appropriate for all users.
At the time this was applied, EXPORT_SYMBOL_GPL() was very new, and
the exports of rtas_call() etc have remained non-GPL. As new APIs have
been added to the RTAS subsystem, their symbol exports have followed
the convention set by existing code.
However, the historical evidence is that RTAS function exports have been
added over time only to satisfy the needs of in-kernel users, and these
clients must have fairly intimate knowledge of how the APIs work to use
them safely. No out of tree users are known, and future ones seem
unlikely.
Arguably the default for RTAS symbols should have become
EXPORT_SYMBOL_GPL once it was available. Let's make it so now, and
exceptions can be evaluated as needed.
In the previous commits that added CLK_OPS_PARENT_ENABLE, support for
this flag was only added to rate change operations (rate setting and
reparent) and disabling unused subtree. It was not added to the
clock gate related operations. Any hardware driver that needs it for
these operations will either see bogus results, or worse, hang.
This has been seen on MT8192 and MT8195, where the imp_ii2_* clk
drivers set this, but dumping debugfs clk_summary would cause it
to hang.
Prepare parent on prepare and enable parent on enable dependencies are
already handled automatically by the core as part of its sequencing.
Whether the case for "enable parent on prepare" should be supported by
this flag or not is not clear, and thus ignored for now.
This change solely fixes the handling of clk_core_is_enabled, i.e.
enabling the parent clock when reading the hardware state. Unfortunately
clk_core_is_enabled is called in a variety of places, sometimes with
the enable clock already held. To avoid deadlocking, the core will
ignore readouts and just return false if CLK_OPS_PARENT_ENABLE is set
but the parent isn't currently enabled.
Fixes: 7743310b682d ("clk: core: support clocks which requires parents enable (part 2)") Fixes: 6f67c1ebbbe7 ("clk: core: support clocks which requires parents enable (part 1)") Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20230103092330.494102-1-wenst@chromium.org Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
pnv_ioda_setup_pe_res() calls opal to map a resource with a PE. However,
the code assumes the resource is allocated and it uses the resource
address to find out the segment(s) which need to be mapped to the
PE. In the unlikely case where the resource hasn't been allocated, the
computation for the segment number is garbage, which can lead to
invalid memory access and potentially a kernel crash, such as:
Hitting the problem is not that easy. It was seen with a (semi-bogus)
PCI device with a class code of 0. The generic PCI framework doesn't
allocate resources in such a case.
The patch is simply skipping resources which are still flagged with
IORESOURCE_UNSET.
We don't have the problem with 64-bit mem resources, as the address of
the resource is checked to be within the range of the 64-bit mmio
window. See pnv_ioda_reserve_dev_m64_pe() and pnv_pci_is_m64().
The gdsc_init() function will rewrite the CLK_DIS_WAIT field while
registering the GDSC (writing the value 0x2 by default). This will
override the setting done in the driver's probe function.
Set cx_gdsc.clk_dis_wait_val to 8 to follow the intention of the probe
function.
To discard false readings, one should use "ti,penirq-recheck-delay-usecs".
Checking get_pendown_state() at the beginning, most of the time fails
causing malfunctioning.
ADS7845 doesn't support pressure.
Avoid the following error reported by libinput-list-devices:
"ADS7845 Touchscreen: kernel bug: device has min == max on ABS_PRESSURE".
When the code flow arrives at printing the error message in
cpg_mssr_resume_noirq(), we know for sure that we are not running on an
RZ/A Soc, as the code checked for that before.
Geert suggested defining multiple register layout variants using an enum
[1] to support further devices like R-Car V3U. So, use enum
clk_reg_layout instead of a boolean .stbyctrl flag. No behavioral
change.
If cpg_mssr_common_init() fails after assigning priv to global variable
cpg_mssr_priv, it deallocates priv, but cpg_mssr_priv keeps dangling
pointer that potentially can be used later.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
On the QCS404 platform the driver for the Global Clock Controller
doens't define gpll0_out_aux and gpll4_out_aux clocks, so it's not
possible to use them as parents. Remove entries for these clocks.
Note: backporting this patch to earlier kernels would also require a
previous patch which switches the gcc driver to use ARRAY_SIZE for
parent data arrays.
`req` is allocated in pcf50633_adc_async_read(), but
adc_enqueue_request() could fail to insert the `req` into queue.
We need to check the return value and free it in the case of failure.
Since commit 8b15769fa72d ("selftests/ftrace: event_triggers: wait
longer for test_event_enable") introduced bash specific "=="
comparation operator, that test will fail when we run it on a
posix-shell. `checkbashisms` warned it as below.
possible bashism in ftrace/func_event_triggers.tc line 45 (should be 'b = a'):
if [ "$e" == $val ]; then
When doing randconfig builds for sparc32 with COMPILE_TEST, some
(non-Sparc) drivers cause kconfig warnings with the Kconfig symbols PM,
PM_GENERIC_DOMAINS, or PM_GENERIC_DOMAINS_OF.
This is due to arch/sparc/Kconfig not using the PM Kconfig for
Sparc32:
if SPARC64
source "kernel/power/Kconfig"
endif
Arnd suggested adding "|| COMPILE_TEST" to the conditional,
instead of trying to track down every driver that selects
any of these PM symbols.
Fixes the following kconfig warnings:
WARNING: unmet direct dependencies detected for PM
Depends on [n]: SPARC64 [=n]
Selected by [y]:
- SUN20I_PPU [=y] && (ARCH_SUNXI || COMPILE_TEST [=y])
WARNING: unmet direct dependencies detected for PM
Depends on [n]: SPARC64 [=n]
Selected by [y]:
- SUN20I_PPU [=y] && (ARCH_SUNXI || COMPILE_TEST [=y])
On aarch64 CPU related events are not under event_source/devices/cpu/events,
they're under event_source/devices/armv8_pmuv3_0/events on my machine.
Using current auto-complete script will generate below error:
[root@localhost bin]# perf stat -e
ls: cannot access '/sys/bus/event_source/devices/cpu/events': No such file or directory
Fix this by not testing /sys/bus/event_source/devices/cpu/events on
aarch64 machine.
Fixes: 003acfc80d009157 ("perf tool: Improve bash command line auto-complete for multiple events with comma") Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxarm@huawei.com Cc: prime.zeng@hisilicon.com Link: https://lore.kernel.org/r/20230207035057.43394-1-yangyicong@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The LLVM template is first echo-ed into command_out and then
command_out executed. The echo surrounds the template with double
quotes, however, the template itself may contain quotes. This is
generally innocuous but in tools/perf/tests/bpf-script-test-prologue.c
we see:
...
SEC("func=null_lseek file->f_mode offset orig")
...
where the first double quote ends the double quote of the echo, then
the > redirects output into a file called f_mode.
To avoid this inadvertent behavior substitute redirects and similar
characters to be ASCII control codes, then substitute the output in
the echo back again.
Fixes: f881043b49a3a87e ("perf llvm: Display eBPF compiling command in debug output") Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: bpf@vger.kernel.org Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: llvm@lists.linux.dev Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20230105082609.344538-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ->writepage() and ->writepages() operations are supposed to write
entire pages. However, on filesystems with a block size smaller than
PAGE_SIZE, __gfs2_jdata_writepage() only adds the first block to the
current transaction instead of adding the entire page. Fix that.
Fixes: a9ff53c3558c ("[GFS2] Make journaled data files identical to normal files on disk") Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Its possible for __break_lease to find the layout's lease before we've
added the layout to the owner's ls_layouts list. In that case, setting
ls_recalled = true without actually recalling the layout will cause the
server to never send a recall callback.
Move the check for ls_layouts before setting ls_recalled.
Fixes: 00dd9aef9522 ("nfsd: implement pNFS layout recalls") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
bigben_probe() does not validate that the output report has the
needed report values in the first field.
A malicious device registering a report with one field and a single
value causes an head OOB write in bigben_worker() when
accessing report_field->value[1] to report_field->value[7].
Use hid_validate_values() which takes care of all the needed checks.
Fixes: 39389480d39b ("HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Link: https://lore.kernel.org/r/20230211-bigben-oob-v1-1-d2849688594c@diag.uniroma1.it Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The mute key, is broken. All the consumer keys on the keyboard USB
interface work normally, except for mute which only sends press events
and never sends release events.
The touchpad key sends the otherwise unused input report with a report-id
of 5 on the touchpad interface. It too only sends press events. This also
requires extra special handling since the multi-touch touchpad events and
the KEY_F21 events for the touchpad toggle must not be send from the same
input_dev (userspace cannot handle this).
This commit adds special handlig for both, fixing these keys not working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stable-dep-of: 4ab3a086d10e ("HID: asus: use spinlock to safely schedule workers") Signed-off-by: Sasha Levin <sashal@kernel.org>
The multi-touch touchpad found on the Medion Akoya E1239T's keyboard-dock,
uses the same custom multi-touch protocol as the Asus keyboard-docks
(same chipset vendor, Integrated Technology Express / ITE).
Add support for this using the existing multi-touch touchpad support in
the hid-asus driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stable-dep-of: 4ab3a086d10e ("HID: asus: use spinlock to safely schedule workers") Signed-off-by: Sasha Levin <sashal@kernel.org>
Add the report_size to struct asus_touchpad_info instead of calculating it.
This is a preparation patch for adding support for the multi-touch touchpad
found on the Medion Akoya E1239T's keyboard-dock, which uses the same
custom multi-touch protocol as the Asus keyboard-docks (same chipset
vendor, Integrated Technology Express / ITE).
The only difference in that the Akoya E1239T keyboard-dock's input-reports
have a 5 byte footer instead of a 1 byte footer, which requires the
report_size to be configurable per touchpad-model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stable-dep-of: 4ab3a086d10e ("HID: asus: use spinlock to safely schedule workers") Signed-off-by: Sasha Levin <sashal@kernel.org>
Make asus_input_mapping() only set EV_REP if we are adding a mapping.
The T100CHI bluetooth keyboard dock has a few input reports for which
we do not create any mappings (these input-reports are present in the
descriptors but never send).
The hid-asus code relies on the HID core not creating input devices for
input-reports without any mappings. But the present of the EV_REP but
counts as a mapping causing 6 /dev/input/event# nodes to be created for
the T100CHI bluetooth keyboard dock. This change brings the amount of
created /dev/input/event# nodes / input-devices down to 4.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Stable-dep-of: 4ab3a086d10e ("HID: asus: use spinlock to safely schedule workers") Signed-off-by: Sasha Levin <sashal@kernel.org>
Use spinlocks to deal with workers introducing a wrapper
bigben_schedule_work(), and several spinlock checks.
Otherwise, bigben_set_led() may schedule bigben->worker after the
structure has been freed, causing a use-after-free.
Fixes: 24c463dcd9f5 ("HID: hid-bigbenff: fix race condition for scheduled work during removal") Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it> Link: https://lore.kernel.org/r/20230125-hid-unregister-leds-v4-3-7860c5763c38@diag.uniroma1.it Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
bigben_worker() checks report_field to be non-NULL.
The check has been added in commit 7c72c4ff669f ("HID: bigbenff: prevent null pointer dereference")
to prevent a NULL pointer crash.
However, the true root cause was a missing check for output
reports, patched in commit c7bf714f8755 ("HID: check empty report_list in bigben_probe()"),
where the type-confused report list_entry was overlapping with
a NULL pointer, which was then causing the crash.
Fixes: 4428552673c6 ("ASoC: dapm: Only power up active channels from a DAI") Signed-off-by: Lucas Tanure <lucas.tanure@collabora.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20230215132851.1626881-1-lucas.tanure@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
- struct 'snd_soc_pcm_runtime' declared inside parameter list will not
be visible outside of this definition or declaration
- struct 'soc_enum' declared inside parameter list will not be visible
outside of this definition or declaration
Declares the missing structure prototypes.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200625153543.85039-3-tzungbi@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: fdff966bfde7 ("ASoC: soc-dapm.h: fixup warning struct snd_pcm_substream not declared") Signed-off-by: Sasha Levin <sashal@kernel.org>
wait_for_completion_timeout() never returns a <0 value. It returns either
on timeout or a positive value (at least 1, or number of jiffies left
till timeout)
So, fix the error handling path and return -ETIMEDOUT should a timeout
occur.
Commit f83c9614c33ba ("dm: allocate a special workqueue for deferred
device removal") switched from using system workqueue to a single
workqueue local to DM. But it didn't eliminate the call to
flush_scheduled_work() that was introduced purely for the benefit of
deferred device removal with commit 5a44612048f ("dm: allow remove to
be deferred").
Since DM core uses its own workqueue (and queue_work) there is no need
to call flush_scheduled_work() from local_exit(). local_exit()'s
destroy_workqueue(deferred_remove_workqueue) handles flushing work
started with queue_work().
Fixes: f83c9614c33ba ("dm: allocate a special workqueue for deferred device removal") Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently for broken fan driver returns value calculated based on error
code (0xFF) in related fan speed register.
Thus, for such fan user gets fan{n}_fault to 1 and fan{n}_input with
misleading value.
Add check for fan fault prior return speed value and return zero if
fault is detected.
Fixes: 8b24079474d0 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Link: https://lore.kernel.org/r/20230212145730.24247-1-vadimp@nvidia.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
Currently the driver always sets the controller to dual data bit mode
for both tx and rx data in the profile mode control register even for
single data bit transfer. Luckily the opcode is set correctly according
to SPI transfer data bit width so it does not actually cause issues.
This change fixes the problem by setting tx and rx data bit mode field
correctly according to the actual SPI transfer tx and rx data bit width.
The driver sets auto_runtime_pm to true, but it doesn't call
pm_runtime_enable(), which results in "Failed to power device" when PM support
is enabled.
Add check for dma_map_single() and return error if it fails in order to
avoid invalid DMA address.
Fixes: 4cb7d5b2948d ("[SCSI] aic94xx: new driver") Link: https://lore.kernel.org/r/20230128110832.6792-1-jiasheng@iscas.ac.cn Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0f8d76b5067e28 ("ASoC: soc-compress.c: fix NULL dereference")
enables DPCM capture, but it should independent from playback.
This patch fixup it.
mtk_drm_bind() can fail, in which case drm_dev_put() is called,
destroying the drm_device object. However a pointer to it was still
being held in the private object, and that pointer would be passed along
to DRM in mtk_drm_sys_prepare() if a suspend were triggered at that
point, resulting in a panic. Clean the pointer when destroying the
object in the error path to prevent this from happening.
Fixes: 6a252d99de5c ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20221122143949.3493104-1-nfraprado@collabora.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Use NULL for NULL pointer to fix the following sparse warning:
drivers/gpu/drm/mediatek/mtk_drm_gem.c:265:27: sparse: warning: Using plain integer as NULL pointer
Fixes: f332c94f8c97 ("drm/mediatek: Implement gem prime vmap/vunmap function") Signed-off-by: Miles Chen <miles.chen@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20230111024443.24559-1-miles.chen@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
At the end of a commit, atomic helpers can generate a fake VBLANK event
automatically. Originally implemented for writeback connectors, the
functionality can be used by any driver and/or hardware without proper
VBLANK interrupt.
The patch updates the documentation to make this behaviour official:
settings struct drm_crtc_state.no_vblank to true enables automatic
generation of fake VBLANK events.
The new interface drm_dev_has_vblank() returns true if vblanking has
been initialized for a device, or false otherwise. Atomic helpers use
this function when initializing no_vblank in the CRTC state in
drm_atomic_helper_check_modeset(). If vblanking has been initialized
for a device, no_blank is disabled. Otherwise it's enabled. Hence,
atomic helpers will automatically send out fake VBLANK events with any
driver that did not initialize vblanking.
v5:
* more precise documentation and commit message
v4:
* replace drm_crtc_has_vblank() with drm_dev_has_vblank()
* add drm_dev_has_vblank() in this patch
* move driver changes into separate patches
v3:
* squash all related changes patches into this patch
And use it in drivers accessing the bridge->next field directly.
This is part of our attempt to make the bridge chain a double-linked list
based on the generic list helpers.
Change the prefix of bridge helpers targeting a bridge chain from
drm_bridge_ to drm_bridge_chain_ to better reflect the fact that
the operation will happen on all elements of chain, starting at the
bridge passed in argument.
bridge->next is only points to the new bridge if drm_bridge_attach()
succeeds. No need to reset it manually here.
Note that this change is part of the attempt to make the bridge chain
a double-linked list. In order to do that we must patch all drivers
manipulating the bridge->next field.
As kzalloc may fail and return NULL pointer,
it should be better to check cstate
in order to avoid the NULL pointer dereference
in __drm_atomic_helper_crtc_reset.
The MIPI DCS specification demands that brightness values are sent in
big endian byte order. It also states that one parameter (i.e. one byte)
shall be sent/received for 8 bit wide values, and two parameters shall
be used for values that are between 9 and 16 bits wide.
Add new functions to properly handle 16-bit brightness in big endian,
since the two 8- and 16-bit cases are distinct from each other.
[richard: use separate functions instead of switch/case]
[richard: split into 16-bit component]
Initialize is_dsp_mode flag in the beginning of function
fsl_sai_set_dai_fmt_tr().
When the DAIFMT is DAIFMT_DSP_B the first time, is_dsp_mode is
true, then the second time DAIFMT is DAIFMT_I2S, is_dsp_mode
still true, which is a wrong state. So need to initialize
is_dsp_mode flag every time.
Fixes: 8146e3b55840 ("ASoC: fsl-sai: Add SND_SOC_DAIFMT_DSP_A/B support.") Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com> Link: https://lore.kernel.org/r/1673852874-32200-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.
Add check for the return value of alloc_ordered_workqueue as it may return
NULL pointer and cause NULL pointer dereference in `hdmi_hdcp.c` and
`hdmi_hpd.c`.
A problem about insmod megachips-stdpxxxx-ge-b850v3-fw.ko failed is
triggered with the following log given:
[ 4497.981497] Error: Driver 'stdp4028-ge-b850v3-fw' is already registered, aborting...
insmod: ERROR: could not insert module megachips-stdpxxxx-ge-b850v3-fw.ko: Device or resource busy
The reason is that stdpxxxx_ge_b850v3_init() returns i2c_add_driver()
directly without checking its return value, if i2c_add_driver() failed,
it returns without calling i2c_del_driver() on the previous i2c driver,
resulting the megachips-stdpxxxx-ge-b850v3-fw can never be installed
later.
A simple call graph is shown as below:
Fix by calling i2c_del_driver() on stdp4028_ge_b850v3_fw_driver when
i2c_add_driver() returns error.
Fixes: 3c39bd5f4f41 ("drm/bridge: Drivers for megachips-stdpxxxx-ge-b850v3-fw (LVDS-DP++)") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Tested-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221108091226.114524-1-yuancan@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
Freescale/NXP i.MX LCDIF and eLCDIF LCD controllers are only present on
Freescale/NXP i.MX SoCs. Hence add a dependency on ARCH_MXS ||
ARCH_MXC, to prevent asking the user about this driver when configuring
a kernel without Freescale/NXP i.MX support.
As of commit 68c508ce00a40973 ("drm: refuse ADDFB2 ioctl for broken
bigendian drivers"), drivers must set the
quirk_addfb_prefer_host_byte_order quirk to make the drm_mode_addfb()
compat code work correctly on big-endian machines.
While that works fine for big-endian XRGB8888 and ARGB8888, which are
mapped to the existing little-endian BGRX8888 and BGRA8888 formats, it
does not work for big-endian XRGB1555 and RGB565, as the latter are not
listed in the format database.
Fix this by adding the missing formats. Limit this to big-endian
platforms, as there is currently no need to support these formats on
little-endian platforms.
Usage of `set -e` before executing a command causes immediate exit
on failure, without cleanup up the resources allocated at setup.
This can affect the next tests that use the same resources,
leading to a chain of failures.
A simple fix is to always call cleanup function when the script exists.
This approach is already used by other existing tests.
Fixes: c4112e27f48b ("selftests: fib_tests: Make test results more verbose") Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com> Link: https://lore.kernel.org/r/20230220110400.26737-2-roxana.nicolescu@canonical.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / kernel.git / log