Linus Torvalds [Tue, 31 May 2022 23:58:24 +0000 (16:58 -0700)]
Merge tag 'nfs-for-5.19-1' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add support for 'dacl' and 'sacl' attributes
Bugfixes and Cleanups:
- Fixes for reporting mapping errors
- Fixes for memory allocation errors
- Improve warning message when locks are lost
- Update documentation for the nfs4_unique_id parameter
- Add an explanation of NFSv4 client identifiers
- Ensure the i_size attribute is written to the fscache storage
- Fix freeing uninitialized nfs4_labels
- Better handling when xprtrdma bc_serv is NULL
- Mark qualified async operations as MOVEABLE tasks"
* tag 'nfs-for-5.19-1' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4.1 mark qualified async operations as MOVEABLE tasks
xprtrdma: treat all calls not a bcall when bc_serv is NULL
NFSv4: Fix free of uninitialized nfs4_label on referral lookup.
NFS: Pass i_size to fscache_unuse_cookie() when a file is released
Documentation: Add an explanation of NFSv4 client identifiers
NFS: update documentation for the nfs4_unique_id parameter
NFS: Improve warning message when locks are lost.
NFSv4.1: Enable access to the NFSv4.1 'dacl' and 'sacl' attributes
NFSv4: Add encoders/decoders for the NFSv4.1 dacl and sacl attributes
NFSv4: Specify the type of ACL to cache
NFSv4: Don't hold the layoutget locks across multiple RPC calls
pNFS/files: Fall back to I/O through the MDS on non-fatal layout errors
NFS: Further fixes to the writeback error handling
NFSv4/pNFS: Do not fail I/O when we fail to allocate the pNFS layout
NFS: Memory allocation failures are not server fatal errors
NFS: Don't report errors from nfs_pageio_complete() more than once
NFS: Do not report flush errors in nfs_write_end()
NFS: Don't report ENOSPC write errors twice
NFS: fsync() should report filesystem errors over EINTR/ERESTARTSYS
NFS: Do not report EINTR/ERESTARTSYS as mapping errors
Linus Torvalds [Tue, 31 May 2022 23:52:59 +0000 (16:52 -0700)]
Merge tag 'f2fs-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've refactored the existing atomic write support
implemented by in-memory operations to have storing data in disk
temporarily, which can give us a benefit to accept more atomic writes.
At the same time, we removed the existing volatile write support.
We've also revisited the file pinning and GC flows and found some
corner cases which contributeed abnormal system behaviours.
As usual, there're several minor code refactoring for readability,
sanity check, and clean ups.
Enhancements:
- allow compression for mmap files in compress_mode=user
- kill volatile write support
- change the current atomic write way
- give priority to select unpinned section for foreground GC
- introduce data read/write showing path info
- remove unnecessary f2fs_lock_op in f2fs_new_inode
Bug fixes:
- fix the file pinning flow during checkpoint=disable and GCs
- fix foreground and background GCs to select the right victims and
get free sections on time
- fix GC flags on defragmenting pages
- avoid an infinite loop to flush node pages
- fix fallocate to use file_modified to update permissions
consistently"
* tag 'f2fs-for-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (40 commits)
f2fs: fix to tag gcing flag on page during file defragment
f2fs: replace F2FS_I(inode) and sbi by the local variable
f2fs: add f2fs_init_write_merge_io function
f2fs: avoid unneeded error handling for revoke_entry_slab allocation
f2fs: allow compression for mmap files in compress_mode=user
f2fs: fix typo in comment
f2fs: make f2fs_read_inline_data() more readable
f2fs: fix to do sanity check for inline inode
f2fs: fix fallocate to use file_modified to update permissions consistently
f2fs: don't use casefolded comparison for "." and ".."
f2fs: do not stop GC when requiring a free section
f2fs: keep wait_ms if EAGAIN happens
f2fs: introduce f2fs_gc_control to consolidate f2fs_gc parameters
f2fs: reject test_dummy_encryption when !CONFIG_FS_ENCRYPTION
f2fs: kill volatile write support
f2fs: change the current atomic write way
f2fs: don't need inode lock for system hidden quota
f2fs: stop allocating pinned sections if EAGAIN happens
f2fs: skip GC if possible when checkpoint disabling
f2fs: give priority to select unpinned section for foreground GC
...
Linus Torvalds [Tue, 31 May 2022 21:38:10 +0000 (14:38 -0700)]
Merge tag 'leds-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Most significant here is the driver for Qualcomm LPG. Apparently it
drives backlight on some boards, so it is quite important for some
people"
* tag 'leds-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: qcom-lpg: Require pattern to follow documentation
leds: lp50xx: Remove duplicated error reporting in .remove()
leds: qcom-lpg: add missing PWM dependency
leds: ktd2692: Make aux-gpios optional
dt-bindings: leds: convert ktd2692 bindings to yaml
leds: ktd2692: Avoid duplicate error messages on probe deferral
leds: is31fl32xx: Improve error reporting in .remove()
leds: Move pwm-multicolor driver into rgb directory
leds: Add PWM multicolor driver
dt-bindings: leds: Add multicolor PWM LED bindings
dt-bindings: leds: Optional multi-led unit address
leds: regulator: Make probeable from device tree
leds: regulator: Add dev helper variable
dt-bindings: leds: Add regulator-led binding
leds: pca9532: Make pca9532_destroy_devices() return void
leds: Add pm8350c support to Qualcomm LPG driver
dt-bindings: leds: Add pm8350c pmic support
leds: Add driver for Qualcomm LPG
dt-bindings: leds: Add Qualcomm Light Pulse Generator binding
Linus Torvalds [Tue, 31 May 2022 21:10:54 +0000 (14:10 -0700)]
Merge tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the Svpbmt extension, which allows memory attributes to
be encoded in pages
- Support for the Allwinner D1's implementation of page-based memory
attributes
- Support for running rv32 binaries on rv64 systems, via the compat
subsystem
- Support for kexec_file()
- Support for the new generic ticket-based spinlocks, which allows us
to also move to qrwlock. These should have already gone in through
the asm-geneic tree as well
- A handful of cleanups and fixes, include some larger ones around
atomics and XIP
* tag 'riscv-for-linus-5.19-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
riscv: compat: Using seperated vdso_maps for compat_vdso_info
RISC-V: Fix the XIP build
RISC-V: Split out the XIP fixups into their own file
RISC-V: ignore xipImage
RISC-V: Avoid empty create_*_mapping definitions
riscv: Don't output a bogus mmu-type on a no MMU kernel
riscv: atomic: Add custom conditional atomic operation implementation
riscv: atomic: Optimize dec_if_positive functions
riscv: atomic: Cleanup unnecessary definition
RISC-V: Load purgatory in kexec_file
RISC-V: Add purgatory
RISC-V: Support for kexec_file on panic
RISC-V: Add kexec_file support
RISC-V: use memcpy for kexec_file mode
kexec_file: Fix kexec_file.c build error for riscv platform
riscv: compat: Add COMPAT Kbuild skeletal support
riscv: compat: ptrace: Add compat_arch_ptrace implement
riscv: compat: signal: Add rt_frame implementation
riscv: add memory-type errata for T-Head
...
NFSv4.1 mark qualified async operations as MOVEABLE tasks
Mark async operations such as RENAME, REMOVE, COMMIT MOVEABLE
for the nfsv4.1+ sessions.
Fixes: 55d793ab30fb9 ("NFSv4.1 identify and mark RPC tasks that can move between transports") Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
NFSv4: Fix free of uninitialized nfs4_label on referral lookup.
Send along the already-allocated fattr along with nfs4_fs_locations, and
drop the memcpy of fattr. We end up growing two more allocations, but this
fixes up a crash as:
Suggested-by: Trond Myklebust <trondmy@hammerspace.com> Fixes: 4095352851f9 ("NFS: Remove the label from the nfs4_lookup_res struct") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Linus Torvalds [Tue, 31 May 2022 16:56:54 +0000 (09:56 -0700)]
Merge tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Intel VT-d driver updates:
- Domain force snooping improvement.
- Cleanups, no intentional functional changes.
- ARM SMMU driver updates:
- Add new Qualcomm device-tree compatible strings
- Add new Nvidia device-tree compatible string for Tegra234
- Fix UAF in SMMUv3 shared virtual addressing code
- Force identity-mapped domains for users of ye olde SMMU legacy
binding
- Minor cleanups
- Fix a BUG_ON in the vfio_iommu_group_notifier:
- Groundwork for upcoming iommufd framework
- Introduction of DMA ownership so that an entire IOMMU group is
either controlled by the kernel or by user-space
- MT8195 and MT8186 support in the Mediatek IOMMU driver
- Make forcing of cache-coherent DMA more coherent between IOMMU
drivers
- Fixes for thunderbolt device DMA protection
- Various smaller fixes and cleanups
* tag 'iommu-updates-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (88 commits)
iommu/amd: Increase timeout waiting for GA log enablement
iommu/s390: Tolerate repeat attach_dev calls
iommu/vt-d: Remove hard coding PGSNP bit in PASID entries
iommu/vt-d: Remove domain_update_iommu_snooping()
iommu/vt-d: Check domain force_snooping against attached devices
iommu/vt-d: Block force-snoop domain attaching if no SC support
iommu/vt-d: Size Page Request Queue to avoid overflow condition
iommu/vt-d: Fold dmar_insert_one_dev_info() into its caller
iommu/vt-d: Change return type of dmar_insert_one_dev_info()
iommu/vt-d: Remove unneeded validity check on dev
iommu/dma: Explicitly sort PCI DMA windows
iommu/dma: Fix iova map result check bug
iommu/mediatek: Fix NULL pointer dereference when printing dev_name
iommu: iommu_group_claim_dma_owner() must always assign a domain
iommu/arm-smmu: Force identity domains for legacy binding
iommu/arm-smmu: Support Tegra234 SMMU
dt-bindings: arm-smmu: Add compatible for Tegra234 SOC
dt-bindings: arm-smmu: Document nvidia,memory-controller property
iommu/arm-smmu-qcom: Add SC8280XP support
dt-bindings: arm-smmu: Add compatible for Qualcomm SC8280XP
...
Linus Torvalds [Tue, 31 May 2022 16:46:23 +0000 (09:46 -0700)]
Merge tag 'microblaze-v5.19' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze updates from Michal Simek:
- Fix issues with freestanding
- Wire memblock_dump_all()
- Add support for memory reservation from DT
* tag 'microblaze-v5.19' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: fix typos in comments
microblaze: Add support for reserved memory defined by DT
microblaze: Wire memblock_dump_all()
microblaze: Use simple memmove/memcpy implementation from lib/string.c
microblaze: Do loop unrolling for optimized memset implementation
microblaze: Use simple memset implementation from lib/string.c
Uwe Kleine-König [Mon, 30 May 2022 07:42:02 +0000 (09:42 +0200)]
RISC-V: Prepare dropping week attribute from arch_kexec_apply_relocations[_add]
Without this change arch/riscv/kernel/elf_kexec.c fails to compile once
commit 233c1e6c319c ("kexec_file: drop weak attribute from
arch_kexec_apply_relocations[_add]") is also contained in the tree.
This currently happens in next-20220527.
Prepare the RISC-V similar to the s390 adaption done in 233c1e6c319c.
This is safe to do on top of the riscv change even without the change to
arch_kexec_apply_relocations.
* tag 'for-5.19/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
video: fbdev: omap: Add prototype for hwa742_update_window_async()
video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup
video: fbdev: radeon: Fix spelling typo in comment
video: fbdev: xen: remove setting of 'transp' parameter
video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()
video: fbdev: omapfb: simplify the return expression of nec_8048_connect()
video: fbdev: omapfb: simplify the return expression of dsi_init_pll_data()
video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1
Linus Torvalds [Mon, 30 May 2022 18:52:18 +0000 (11:52 -0700)]
Merge tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
"Minor cleanups and code optimizations, e.g.:
- improvements in assembly statements in the tmpalias code path
- added some additionals compile time checks
- drop some unneccesary assembler DMA syncs"
* tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNT
parisc: Optimize tmpalias function calls
parisc: Add dep_safe() macro to deposit a register in 32- and 64-kernels
parisc: Fix wrong comment for shr macro
parisc: Prevent ldil() to sign-extend into upper 32 bits
parisc: Don't hardcode assembler bit definitions in tmpalias code
parisc: Don't enforce DMA completion order in cache flushes
parisc: video: fbdev: stifb: Add sti_dump_font() to dump STI font
Linus Torvalds [Mon, 30 May 2022 18:37:26 +0000 (11:37 -0700)]
Merge tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
Linus Torvalds [Mon, 30 May 2022 18:30:16 +0000 (11:30 -0700)]
Merge tag 'acpi-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add some new device IDs, update a few drivers (processor,
battery, backlight) and clean up code in a few places.
Specifics:
- Add Meteor Lake ACPI IDs for DPTF devices (Sumeet Pawnikar)
- Rearrange find_child_checks() to simplify code (Rafael Wysocki)
- Use memremap() to map the UCSI mailbox that is always in main
memory and drop acpi_release_memory() that has no more users
(Heikki Krogerus, Dan Carpenter)
- Make max_cstate/nocst/bm_check_disable processor module parameters
visible in sysfs (Yajun Deng)
- Fix typo in the CPPC driver (Julia Lawall)
- Make the ACPI battery driver show the "not-charging" status by
default unless "charging" or "full" is directly indicated (Werner
Sembach)
- Improve the PM notifier in the ACPI backlight driver (Zhang Rui)
- Clean up some white space in the ACPI code (Ian Cowan)"
* tag 'acpi-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe
ACPI: DPTF: Support Meteor Lake
ACPI: CPPC: fix typo in comment
ACPI: video: improve PM notifer callback
ACPI: clean up white space in a few places for consistency
ACPI: glue: Rearrange find_child_checks()
ACPI: processor: idle: Expose max_cstate/nocst/bm_check_disable read-only in sysfs
ACPI: battery: Make "not-charging" the default on no charging or full info
ACPI: OSL: Remove the helper for deactivating memory region
usb: typec: ucsi: acpi: Map the mailbox with memremap()
Linus Torvalds [Mon, 30 May 2022 18:19:16 +0000 (11:19 -0700)]
Merge tag 'ovl-update-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs updates from Miklos Szeredi:
- Support idmapped layers in overlayfs (Christian Brauner)
- Add a fix to exportfs that is relevant to open_by_handle_at(2) as
well
- Introduce new lookup helpers that allow passing mnt_userns into
inode_permission()
* tag 'ovl-update-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: support idmapped layers
ovl: handle idmappings in ovl_xattr_{g,s}et()
ovl: handle idmappings in layer open helpers
ovl: handle idmappings in ovl_permission()
ovl: use ovl_copy_{real,upper}attr() wrappers
ovl: store lower path in ovl_inode
ovl: handle idmappings for layer lookup
ovl: handle idmappings for layer fileattrs
ovl: use ovl_path_getxattr() wrapper
ovl: use ovl_lookup_upper() wrapper
ovl: use ovl_do_notify_change() wrapper
ovl: pass layer mnt to ovl_open_realfile()
ovl: pass ofs to setattr operations
ovl: handle idmappings in creation operations
ovl: add ovl_upper_mnt_userns() wrapper
ovl: pass ofs to creation operations
ovl: use wrappers to all vfs_*xattr() calls
exportfs: support idmapped mounts
fs: add two trivial lookup helpers
Linus Torvalds [Mon, 30 May 2022 18:01:50 +0000 (11:01 -0700)]
Merge tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (38 commits)
MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC
MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA
MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem()
MIPS: Kconfig: Fix indentation and add endif comment
MIPS: bmips: Fix compiler warning observed on W=1 build
MIPS: Rewrite `csum_tcpudp_nofold' in plain C
mips: setup: use strscpy to replace strlcpy
MIPS: Octeon: add SNIC10E board
MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo.
MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.
MIPS: Ingenic: Add PWM nodes for X1830.
MIPS: Octeon: fix typo in comment
MIPS: loongson32: Kconfig: Remove extra space
MIPS: Sibyte: remove unnecessary return variable
MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation
selftests/ftrace: Save kprobe_events to test log
MIPS: tools: no need to initialise statics to 0
MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon
MIPS: VR41xx: Drop redundant spinlock initialization
MIPS: smp: optimization for flush_tlb_mm when exiting
...
Linus Torvalds [Mon, 30 May 2022 17:56:18 +0000 (10:56 -0700)]
Merge tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
"A collection of changes to add elf-fdpic loader support for m68k.
Also a collection of various fixes. They include typo corrections,
undefined symbol compilation fixes, removal of the ISA_DMA_API support
and removal of unused code.
Summary:
- correctly set up ZERO_PAGE pointer
- drop ISA_DMA_API support
- fix comment typos
- fixes for undefined symbols
- remove unused code and variables
- elf-fdpic loader support for m68k"
* tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: fix 68000 CPU link with no platform selected
m68k: removed unused "mach_get_ss"
m68knommu: fix undefined reference to `mach_get_rtc_pll'
m68knommu: fix undefined reference to `_init_sp'
m68knommu: allow elf_fdpic loader to be selected
m68knommu: add definitions to support elf_fdpic program loader
m68knommu: implement minimal regset support
m68knommu: use asm-generic/mmu.h for nommu setups
m68k: fix typos in comments
m68k: coldfire: drop ISA_DMA_API support
m68knommu: set ZERO_PAGE() to the allocated zeroed page
Merge branches 'acpi-glue', 'acpi-osl', 'acpi-processor' and 'acpi-cppc'
Merge general ACPI cleanups and processor support updates for 5.19-rc1:
- Rearrange find_child_checks() to simplify code (Rafael Wysocki).
- Use memremap() to map the UCSI mailbox that is always in main memory
and drop acpi_release_memory() that has no more users (Heikki
Krogerus, Dan Carpenter).
- Make max_cstate/nocst/bm_check_disable processor module parameters
visible in sysfs (Yajun Deng).
* acpi-osl:
usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe
ACPI: OSL: Remove the helper for deactivating memory region
usb: typec: ucsi: acpi: Map the mailbox with memremap()
* acpi-processor:
ACPI: processor: idle: Expose max_cstate/nocst/bm_check_disable read-only in sysfs
Dan Carpenter [Mon, 9 May 2022 09:08:28 +0000 (12:08 +0300)]
usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe
The devm_memremap() function never returns NULL. It returns error
pointers.
Fixes: 9b51265d8f77 ("usb: typec: ucsi: acpi: Map the mailbox with memremap()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge system power off handling rework from Dmitry Osipenko for
5.19-rc1.
This introduces a mechanism allowing power sequences to be used for
powering off the system and makes related changes in platform-specific
code for multiple platforms.
* pm-sysoff: (29 commits)
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
arm64: Use do_kernel_power_off()
riscv: Use do_kernel_power_off()
csky: Use do_kernel_power_off()
...
Merge OPP (Operating Performance Points) changes for 5.19-rc1:
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana).
- Use list iterator only inside the list_for_each_entry loop (Xiaomeng
Tong, and Jakob Koschel).
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski).
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter).
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
* pm-opp:
opp: Reorder definition of ceil/floor helpers
opp: Add apis to retrieve opps with interconnect bandwidth
dt-bindings: opp: opp-v2-kryo-cpu: Remove SMEM
opp: use list iterator only inside the loop
opp: replace usage of found with dedicated list iterator variable
PM: opp: simplify with dev_err_probe()
OPP: call of_node_put() on error path in _bandwidth_supported()
Pierre Gondois [Mon, 30 May 2022 10:04:24 +0000 (12:04 +0200)]
cpufreq: CPPC: Fix unused-function warning
Building the cppc_cpufreq driver with for arm64 with
CONFIG_ENERGY_MODEL=n triggers the following warnings:
drivers/cpufreq/cppc_cpufreq.c:550:12: error: ‘cppc_get_cpu_cost’ defined but not used
[-Werror=unused-function]
550 | static int cppc_get_cpu_cost(struct device *cpu_dev, unsigned long KHz,
| ^~~~~~~~~~~~~~~~~
drivers/cpufreq/cppc_cpufreq.c:481:12: error: ‘cppc_get_cpu_power’ defined but not used
[-Werror=unused-function]
481 | static int cppc_get_cpu_power(struct device *cpu_dev,
| ^~~~~~~~~~~~~~~~~~
Move the Energy Model related functions into specific guards.
This allows to fix the warning and prevent doing extra work
when the Energy Model is not present.
Fixes: 21baa9c72795 ("cpufreq: CPPC: Register EM based on efficiency class information") Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Tested-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Zheng Bin [Sat, 21 May 2022 03:24:38 +0000 (11:24 +0800)]
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
If CONFIG_ACPI_CPPC_CPUFREQ_FIE is not set, building fails:
drivers/cpufreq/cppc_cpufreq.c: In function ‘populate_efficiency_class’:
drivers/cpufreq/cppc_cpufreq.c:584:2: error: ‘cppc_cpufreq_driver’ undeclared (first use in this function); did you mean ‘cpufreq_driver’?
cppc_cpufreq_driver.register_em = cppc_cpufreq_register_em;
^~~~~~~~~~~~~~~~~~~
cpufreq_driver
Make declare of cppc_cpufreq_driver out of CONFIG_ACPI_CPPC_CPUFREQ_FIE
to fix this.
Fixes: 21baa9c72795 ("cpufreq: CPPC: Register EM based on efficiency class information") Signed-off-by: Zheng Bin <zhengbin13@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Sun, 29 May 2022 18:38:27 +0000 (11:38 -0700)]
Merge tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Nothing special, this includes a couple of new device support and new
driver support and bunch of driver updates.
New support:
- Tegra gpcdma driver support
- Qualcomm SM8350, Sm8450 and SC7280 device support
- Renesas RZN1 dma and platform support
Updates:
- stm32 device pause/resume support and updates
- DMA memset ops Documentation and usage clarification
* tag 'dmaengine-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (87 commits)
dmaengine: idxd: make idxd_wq_enable() return 0 if wq is already enabled
dmaengine: sun6i: Add support for the D1 variant
dmaengine: sun6i: Add support for 34-bit physical addresses
dmaengine: sun6i: Do not use virt_to_phys
dt-bindings: dma: sun50i-a64: Add compatible for D1
dmaengine: tegra: Remove unused switch case
dmaengine: tegra: Fix uninitialized variable usage
dmaengine: stm32-dma: add device_pause/device_resume support
dmaengine: stm32-dma: rename pm ops before dma pause/resume introduction
dmaengine: stm32-dma: pass DMA_SxSCR value to stm32_dma_handle_chan_done()
dmaengine: stm32-dma: introduce stm32_dma_sg_inc to manage chan->next_sg
dmaengine: stm32-dmamux: avoid reset of dmamux if used by coprocessor
dmaengine: qcom: gpi: Add support for sc7280
dt-bindings: dma: pl330: Add power-domains
dmaengine: stm32-mdma: use dev_dbg on non-busy channel spurious it
dmaengine: stm32-mdma: fix chan initialization in stm32_mdma_irq_handler()
dmaengine: stm32-mdma: remove GISR1 register
dmaengine: ti: deprecate '#dma-channels'
dmaengine: mmp: deprecate '#dma-channels'
dmaengine: pxa: deprecate '#dma-channels' and '#dma-requests'
...
Linus Torvalds [Sun, 29 May 2022 17:31:36 +0000 (10:31 -0700)]
Merge tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"The majority of the changes are for fixes and clean ups.
Notable changes:
- Rework trace event triggers code to be easier to interact with.
- Support for embedding bootconfig with the kernel (as suppose to
having it embedded in initram). This is useful for embedded boards
without initram disks.
- Speed up boot by parallelizing the creation of tracefs files.
- Allow absolute ring buffer timestamps handle timestamps that use
more than 59 bits.
- Added new tracing clock "TAI" (International Atomic Time)
- Have weak functions show up in available_filter_function list as:
__ftrace_invalid_address___<invalid-offset> instead of using the
name of the function before it"
* tag 'trace-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (52 commits)
ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function
tracing: Fix comments for event_trigger_separate_filter()
x86/traceponit: Fix comment about irq vector tracepoints
x86,tracing: Remove unused headers
ftrace: Clean up hash direct_functions on register failures
tracing: Fix comments of create_filter()
tracing: Disable kcov on trace_preemptirq.c
tracing: Initialize integer variable to prevent garbage return value
ftrace: Fix typo in comment
ftrace: Remove return value of ftrace_arch_modify_*()
tracing: Cleanup code by removing init "char *name"
tracing: Change "char *" string form to "char []"
tracing/timerlat: Do not wakeup the thread if the trace stops at the IRQ
tracing/timerlat: Print stacktrace in the IRQ handler if needed
tracing/timerlat: Notify IRQ new max latency only if stop tracing is set
kprobes: Fix build errors with CONFIG_KRETPROBES=n
tracing: Fix return value of trace_pid_write()
tracing: Fix potential double free in create_var_ref()
tracing: Use strim() to remove whitespace instead of doing it manually
ftrace: Deal with error return code of the ftrace_process_locs() function
...
Linus Torvalds [Sun, 29 May 2022 17:10:15 +0000 (10:10 -0700)]
Merge tag 'perf-tools-for-v5.19-2022-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Add BPF based off-CPU profiling
- Improvements for system wide recording, specially for Intel PT
- Improve DWARF unwinding on arm64
- Support Arm CoreSight trace data disassembly in 'perf script' python
- Fix build with new libbpf version, related to supporting older
versions of distro released libbpf packages
- Fix event syntax error caused by ExtSel in the JSON events infra
- Use stdio interface if slang is not supported in 'perf c2c'
- Add 'perf test' checking for perf stat CSV output
- Sync the msr-index.h copy with the kernel sources
* tag 'perf-tools-for-v5.19-2022-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (38 commits)
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf scripts python: Support Arm CoreSight trace data disassembly
perf scripting python: Expose dso and map information
perf jevents: Fix event syntax error caused by ExtSel
perf tools arm64: Add support for VG register
perf unwind arm64: Decouple Libunwind register names from Perf
perf unwind: Use dynamic register set for DWARF unwind
perf tools arm64: Copy perf_regs.h from the kernel
perf unwind arm64: Use perf's copy of kernel headers
perf c2c: Use stdio interface if slang is not supported
perf test: Add a basic offcpu profiling test
perf record: Add cgroup support for off-cpu profiling
perf record: Handle argument change in sched_switch
perf record: Implement basic filtering for off-cpu
perf record: Enable off-cpu analysis with BPF
perf report: Do not extend sample type of bpf-output event
perf test: Add checking for perf stat CSV output.
perf tools: Allow system-wide events to keep their own threads
perf tools: Allow system-wide events to keep their own CPUs
libperf evsel: Add comments for booleans
...
Add the prototype, but I wonder if we couldn't drop exporting the symbol
instead. Since omapfb_update_window_async() is exported the same way,
are there any users outside of the tree?
Linus Torvalds [Sat, 28 May 2022 21:05:54 +0000 (14:05 -0700)]
Merge tag 'input-for-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for the Azoteq IQS7222A/B/C capacitive touch controller
- a new driver for Raspberry Pi Sense HAT joystick
- sun4i-lradc-keys gained support of R329 and D1 variants, plus it can
be now used as a wakeup source
- pm8941-pwrkey can now properly handle PON GEN3 variants; the driver
also implements software debouncing and has a workaround for missing
key press events
- assorted driver fixes and cleanups
* tag 'input-for-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits)
Input: stmfts - do not leave device disabled in stmfts_input_open
Input: gpio-keys - cancel delayed work only in case of GPIO
Input: cypress_ps2 - fix typo in comment
Input: vmmouse - disable vmmouse before entering suspend mode
dt-bindings: google,cros-ec-keyb: Fixup bad compatible match
Input: cros-ec-keyb - allow skipping keyboard registration
dt-bindings: google,cros-ec-keyb: Introduce switches only compatible
Input: psmouse-smbus - avoid flush_scheduled_work() usage
Input: bcm-keypad - remove unneeded NULL check before clk_disable_unprepare
Input: sparcspkr - fix refcount leak in bbc_beep_probe
Input: sun4i-lradc-keys - add support for R329 and D1
Input: sun4i-lradc-keys - add optional clock/reset support
dt-bindings: input: sun4i-lradc-keys: Add R329 and D1 compatibles
Input: sun4i-lradc-keys - add wakeup support
Input: pm8941-pwrkey - simulate missed key press events
Input: pm8941-pwrkey - add software key press debouncing support
Input: pm8941-pwrkey - add support for PON GEN3 base addresses
Input: pm8941-pwrkey - fix error message
Input: synaptics-rmi4 - remove unnecessary flush_workqueue()
Input: ep93xx_keypad - use devm_platform_ioremap_resource() helper
...
Linus Torvalds [Sat, 28 May 2022 18:08:48 +0000 (11:08 -0700)]
drm: fix EDID struct for old ARM OABI format
When building the kernel for arm with the "-mabi=apcs-gnu" option, gcc
will force alignment of all structures and unions to a word boundary
(see also STRUCTURE_SIZE_BOUNDARY and the "-mstructure-size-boundary=XX"
option if you're a gcc person), even when the members of said structures
do not want or need said alignment.
This completely messes up the structure alignment of 'struct edid' on
those targets, because even though all the embedded structures are
marked with "__attribute__((packed))", the unions that contain them are
not.
This was exposed by commit 48199ff417e5 ("drm/edid: add EDID block count
and size helpers"), but the bug is pre-existing. That commit just made
the structure layout problem cause a build failure due to the addition
of the
BUILD_BUG_ON(sizeof(*edid) != EDID_LENGTH);
sanity check in drivers/gpu/drm/drm_edid.c:edid_block_data().
This legacy union alignment should probably not be used in the first
place, but we can fix the layout by adding the packed attribute to the
union entries even when each member is already packed and it shouldn't
matter in a sane build environment.
You can see this issue with a trivial test program:
- Add a new error message to Hyper-V DRM driver (Saurabh Sengar)
* tag 'hyperv-next-signed-20220528' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (28 commits)
hv_balloon: Fix balloon_probe() and balloon_remove() error handling
scsi: storvsc: Removing Pre Win8 related logic
Drivers: hv: vmbus: fix typo in comment
PCI: hv: Fix synchronization between channel callback and hv_pci_bus_exit()
PCI: hv: Add validation for untrusted Hyper-V values
PCI: hv: Fix interrupt mapping for multi-MSI
PCI: hv: Reuse existing IRTE allocation in compose_msi_msg()
drm/hyperv: Remove support for Hyper-V 2008 and 2008R2/Win7
video: hyperv_fb: Remove support for Hyper-V 2008 and 2008R2/Win7
scsi: storvsc: Remove support for Hyper-V 2008 and 2008R2/Win7
Drivers: hv: vmbus: Remove support for Hyper-V 2008 and Hyper-V 2008R2/Win7
x86/hyperv: Disable hardlockup detector by default in Hyper-V guests
drm/hyperv: Add error message for fb size greater than allocated
PCI: hv: Do not set PCI_COMMAND_MEMORY to reduce VM boot time
PCI: hv: Fix hv_arch_irq_unmask() for multi-MSI
Drivers: hv: vmbus: Refactor the ring-buffer iterator functions
Drivers: hv: vmbus: Accept hv_sock offers in isolated guests
hv_sock: Add validation for untrusted Hyper-V values
hv_sock: Copy packets sent by Hyper-V out of the ring buffer
hv_sock: Check hv_pkt_iter_first_raw()'s return value
...
Linus Torvalds [Sat, 28 May 2022 18:27:17 +0000 (11:27 -0700)]
Merge tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Convert to the generic mmap support (ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT)
- Add support for outline-only KASAN with 64-bit Radix MMU (P9 or later)
- Increase SIGSTKSZ and MINSIGSTKSZ and add support for AT_MINSIGSTKSZ
- Enable the DAWR (Data Address Watchpoint) on POWER9 DD2.3 or later
- Drop support for system call instruction emulation
- Many other small features and fixes
Thanks to Alexey Kardashevskiy, Alistair Popple, Andy Shevchenko, Bagas
Sanjaya, Bjorn Helgaas, Bo Liu, Chen Huang, Christophe Leroy, Colin Ian
King, Daniel Axtens, Dwaipayan Ray, Fabiano Rosas, Finn Thain, Frank
Rowand, Fuqian Huang, Guilherme G. Piccoli, Hangyu Hua, Haowen Bai,
Haren Myneni, Hari Bathini, He Ying, Jason Wang, Jiapeng Chong, Jing
Yangyang, Joel Stanley, Julia Lawall, Kajol Jain, Kevin Hao, Krzysztof
Kozlowski, Laurent Dufour, Lv Ruyi, Madhavan Srinivasan, Magali Lemes,
Miaoqian Lin, Minghao Chi, Nathan Chancellor, Naveen N. Rao, Nicholas
Piggin, Oliver O'Halloran, Oscar Salvador, Pali Rohár, Paul Mackerras,
Peng Wu, Qing Wang, Randy Dunlap, Reza Arbab, Russell Currey, Sohaib
Mohamed, Vaibhav Jain, Vasant Hegde, Wang Qing, Wang Wensheng, Xiang
wangx, Xiaomeng Tong, Xu Wang, Yang Guang, Yang Li, Ye Bin, YueHaibing,
Yu Kuai, Zheng Bin, Zou Wei, and Zucheng Zheng.
* tag 'powerpc-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (200 commits)
powerpc/64: Include cache.h directly in paca.h
powerpc/64s: Only set HAVE_ARCH_UNMAPPED_AREA when CONFIG_PPC_64S_HASH_MMU is set
powerpc/xics: Include missing header
powerpc/powernv/pci: Drop VF MPS fixup
powerpc/fsl_book3e: Don't set rodata RO too early
powerpc/microwatt: Add mmu bits to device tree
powerpc/powernv/flash: Check OPAL flash calls exist before using
powerpc/powermac: constify device_node in of_irq_parse_oldworld()
powerpc/powermac: add missing g5_phy_disable_cpu1() declaration
selftests/powerpc/pmu: fix spelling mistake "mis-match" -> "mismatch"
powerpc: Enable the DAWR on POWER9 DD2.3 and above
powerpc/64s: Add CPU_FTRS_POWER10 to ALWAYS mask
powerpc/64s: Add CPU_FTRS_POWER9_DD2_2 to CPU_FTRS_ALWAYS mask
powerpc: Fix all occurences of "the the"
selftests/powerpc/pmu/ebb: remove fixed_instruction.S
powerpc/platforms/83xx: Use of_device_get_match_data()
powerpc/eeh: Drop redundant spinlock initialization
powerpc/iommu: Add missing of_node_put in iommu_init_early_dart
powerpc/pseries/vas: Call misc_deregister if sysfs init fails
powerpc/papr_scm: Fix leaking nvdimm_events_map elements
...
Linus Torvalds [Sat, 28 May 2022 18:15:54 +0000 (11:15 -0700)]
Merge tag 'pinctrl-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"Pretty big this time. Mostly due to (nice) Renesas refactorings.
Core changes:
- New helpers from Andy such as for_each_gpiochip_node() affecting
both GPIO and pin control, improving a bunch of drivers in the
process.
- Pulled in Marc Zyngiers work to make IRQ chips immutable, and
started to apply fixups on top.
New drivers:
- New driver for Marvell MVEBU 98DX2530.
- New driver for Mediatek MT8195.
- Support Qualcomm PMX65 and PM6125.
- New driver for Qualcomm SC7280 LPASS pin control.
- New driver for Rockchip RK3588.
- New driver for NXP Freescale i.MXRT1170.
- New driver for Mediatek MT6795 Helio X10.
Improvements:
- Several Aspeed G6 cleanups and non-critical fixes.
- Thorought refactoring of some of the ever improving Renesas
drivers.
- Clean up Mediatek MT8192 bindings a bit.
- PWM output and clock monitoring in the Ocelot LAN966x driver.
- Thorough refactoring and cleanup of the Ralink drivers such as
RT2880, RT3883, RT305X, MT7620, MT7621, MT7628 splitting these into
proper sub-drivers"
* tag 'pinctrl-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (161 commits)
pinctrl: apple: Use a raw spinlock for the regmap
pinctrl: berlin: bg4ct: Use devm_platform_*ioremap_resource() APIs
pinctrl: intel: Fix kernel doc format, i.e. add return sections
dt-bindings: pinctrl: qcom: Drop 'maxItems' on 'wakeup-parent'
pinctrl: starfive: Make the irqchip immutable
pinctrl: mediatek: Add pinctrl driver for MT6795 Helio X10
dt-bindings: pinctrl: Add MediaTek MT6795 pinctrl bindings
pinctrl: freescale: Add i.MXRT1170 pinctrl driver support
dt-bindings: pinctrl: add i.MXRT1170 pinctrl Documentation
dt-bindings: pinctrl: rockchip: increase max amount of device functions
dt-bindings: pinctrl: qcom,pmic-gpio: add 'gpio-reserved-ranges'
dt-bindings: pinctrl: qcom,pmic-gpio: add 'input-disable'
dt-bindings: pinctrl: qcom,pmic-gpio: describe gpio-line-names
dt-bindings: pinctrl: qcom,pmic-gpio: fix matching pin config
dt-bindings: pinctrl: qcom,pmic-gpio: document PM8150L and PMM8155AU
pinctrl: qcom: spmi-gpio: Add pm6125 compatible
dt-bindings: pinctrl: qcom-pmic-gpio: Add pm6125 compatible
pinctrl: intel: Drop unused irqchip member in struct intel_pinctrl
pinctrl: intel: make irq_chip immutable
pinctrl: cherryview: Use GPIO chip pointer in chv_gpio_irq_mask_unmask()
...
video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup
Commit bdffc31d4a3b ("fbdev: vesafb: Cleanup fb_info in .fb_destroy rather
than .remove") fixed a use-after-free error due the vesafb driver freeing
the fb_info in the .remove handler instead of doing it in .fb_destroy.
This can happen if the .fb_destroy callback is executed after the .remove
callback, since the former tries to access a pointer freed by the latter.
But that change didn't take into account that another possible scenario is
that .fb_destroy is called before the .remove callback. For example, if no
process has the fbdev chardev opened by the time the driver is removed.
If that's the case, fb_info will be freed when unregister_framebuffer() is
called, making the fb_info pointer accessed in vesafb_remove() after that
to no longer be valid.
To prevent that, move the expression containing the info->par to happen
before the unregister_framebuffer() function call.
Fixes: bdffc31d4a3b ("fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove") Reported-by: Pascal Ernster <dri-devel@hardfalcon.net> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Tested-by: Pascal Ernster <dri-devel@hardfalcon.net> Signed-off-by: Helge Deller <deller@gmx.de>
It got merged a bit prematurely and shortly after the kernel test robot
and Sudip pointed out build failures:
arm: imx_v6_v7_defconfig and multi_v7_defconfig
mips: decstation_64_defconfig, decstation_defconfig, decstation_r4k_defconfig
In file included from crypto/chacha20poly1305.c:13:
include/crypto/poly1305.h:56:46: error: 'CONFIG_CRYPTO_LIB_POLY1305_RSIZE' undeclared here (not in a function); did you mean 'CONFIG_CRYPTO_POLY1305_MODULE'?
56 | struct poly1305_key opaque_r[CONFIG_CRYPTO_LIB_POLY1305_RSIZE];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We could attempt to fix this by listing the dependencies piecemeal, but
it's not as obvious as it looks: drivers like caam use this macro in
headers even if there's no .o compiled in that makes use of it. So
actually fixing this might require a bit more of a comprehensive
approach, rather than whack-a-mole with hunting down which drivers use
which headers which use this macro.
Therefore, this commit just reverts the change, and maybe the problem
can be visited on the next rainy day.
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Fixes: 60e88199e4bf ("crypto: poly1305 - cleanup stray CRYPTO_LIB_POLY1305_RSIZE") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid adding weak function
If an unused weak function was traced, it's call to fentry will still
exist, which gets added into the __mcount_loc table. Ftrace will use
kallsyms to retrieve the name for each location in __mcount_loc to display
it in the available_filter_functions and used to enable functions via the
name matching in set_ftrace_filter/notrace. Enabling these functions do
nothing but enable an unused call to ftrace_caller. If a traced weak
function is overridden, the symbol of the function would be used for it,
which will either created duplicate names, or if the previous function was
not traced, it would be incorrectly be listed in available_filter_functions
as a function that can be traced.
This became an issue with BPF[1] as there are tooling that enables the
direct callers via ftrace but then checks to see if the functions were
actually enabled. The case of one function that was marked notrace, but
was followed by an unused weak function that was traced. The unused
function's call to fentry was added to the __mcount_loc section, and
kallsyms retrieved the untraced function's symbol as the weak function was
overridden. Since the untraced function would not get traced, the BPF
check would detect this and fail.
The real fix would be to fix kallsyms to not show addresses of weak
functions as the function before it. But that would require adding code in
the build to add function size to kallsyms so that it can know when the
function ends instead of just using the start of the next known symbol.
In the mean time, this is a work around. Add a FTRACE_MCOUNT_MAX_OFFSET
macro that if defined, ftrace will ignore any function that has its call
to fentry/mcount that has an offset from the symbol that is greater than
FTRACE_MCOUNT_MAX_OFFSET.
If CONFIG_HAVE_FENTRY is defined for x86, define FTRACE_MCOUNT_MAX_OFFSET
to zero (unless IBT is enabled), which will have ftrace ignore all locations
that are not at the start of the function (or one after the ENDBR
instruction).
A worker thread is added at boot up to scan all the ftrace record entries,
and will mark any that fail the FTRACE_MCOUNT_MAX_OFFSET test as disabled.
They will still appear in the available_filter_functions file as:
__ftrace_invalid_address___<invalid-offset>
(showing the offset that caused it to be invalid).
This is required for tools that use libtracefs (like trace-cmd does) that
scan the available_filter_functions and enable set_ftrace_filter and
set_ftrace_notrace using indexes of the function listed in the file (this
is a speedup, as enabling thousands of files via names is an O(n^2)
operation and can take minutes to complete, where the indexing takes less
than a second).
The invalid functions cannot be removed from available_filter_functions as
the names there correspond to the ftrace records in the array that manages
them (and the indexing depends on this).
Linus Torvalds [Sat, 28 May 2022 04:24:19 +0000 (21:24 -0700)]
Merge tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl updates from Dan Williams:
"Compute Express Link (CXL) updates for this cycle.
The highlight is new driver-core infrastructure and CXL subsystem
changes for allowing lockdep to validate device_lock() usage. Thanks
to PeterZ for setting me straight on the current capabilities of the
lockdep API, and Greg acked it as well.
On the CXL ACPI side this update adds support for CXL _OSC so that
platform firmware knows that it is safe to still grant Linux native
control of PCIe hotplug and error handling in the presence of CXL
devices. A circular dependency problem was discovered between suspend
and CXL memory for cases where the suspend image might be stored in
CXL memory where that image also contains the PCI register state to
restore to re-enable the device. Disable suspend for now until an
architecture is defined to clarify that conflict.
Lastly a collection of reworks, fixes, and cleanups to the CXL
subsystem where support for snooping mailbox commands and properly
handling the "mem_enable" flow are the highlights.
Summary:
- Add driver-core infrastructure for lockdep validation of
device_lock(), and fixup a deadlock report that was previously
hidden behind the 'lockdep no validate' policy.
- Add CXL _OSC support for claiming native control of CXL hotplug and
error handling.
- Disable suspend in the presence of CXL memory unless and until a
protocol is identified for restoring PCI device context from memory
hosted on CXL PCI devices.
- Add support for snooping CXL mailbox commands to protect against
inopportune changes, like set-partition with the 'immediate' flag
set.
- Rework how the driver detects legacy CXL 1.1 configurations (CXL
DVSEC / 'mem_enable') before enabling new CXL 2.0 decode
configurations (CXL HDM Capability).
- Miscellaneous cleanups and fixes from -next exposure"
* tag 'cxl-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (47 commits)
cxl/port: Enable HDM Capability after validating DVSEC Ranges
cxl/port: Reuse 'struct cxl_hdm' context for hdm init
cxl/port: Move endpoint HDM Decoder Capability init to port driver
cxl/pci: Drop @info argument to cxl_hdm_decode_init()
cxl/mem: Merge cxl_dvsec_ranges() and cxl_hdm_decode_init()
cxl/mem: Skip range enumeration if mem_enable clear
cxl/mem: Consolidate CXL DVSEC Range enumeration in the core
cxl/pci: Move cxl_await_media_ready() to the core
cxl/mem: Validate port connectivity before dvsec ranges
cxl/mem: Fix cxl_mem_probe() error exit
cxl/pci: Drop wait_for_valid() from cxl_await_media_ready()
cxl/pci: Consolidate wait_for_media() and wait_for_media_ready()
cxl/mem: Drop mem_enabled check from wait_for_media()
nvdimm: Fix firmware activation deadlock scenarios
device-core: Kill the lockdep_mutex
nvdimm: Drop nd_device_lock()
ACPI: NFIT: Drop nfit_device_lock()
nvdimm: Replace lockdep_mutex with local lock classes
cxl: Drop cxl_device_lock()
cxl/acpi: Add root device lockdep validation
...
Linus Torvalds [Sat, 28 May 2022 01:17:03 +0000 (18:17 -0700)]
Merge tag 'clang-format-for-linus-v5.19-rc1' of https://github.com/ojeda/linux
Pull clang-format updates from Miguel Ojeda:
"clang-format modernization and cleanups.
A few changes from Brian Norris and Mickaël Salaün to start taking
advantage of some clang-format 11 features, plus a few cleanups and
the usual update of the macro list"
* tag 'clang-format-for-linus-v5.19-rc1' of https://github.com/ojeda/linux:
clang-format: Fix space after for_each macros
clang-format: Fix goto labels indentation
clang-format: Update to clang-format >= 6
clang-format: Extend the for_each list with tools/
clang-format: Simplify command with `sort -u`
clang-format: Use POSIX locale for `sort`
clang-format: Update with v5.18-rc7's `for_each` macro list
Linus Torvalds [Fri, 27 May 2022 23:05:57 +0000 (16:05 -0700)]
Merge tag '5.19-rc-smb3-client-fixes-updated' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs client updates from Steve French:
- multichannel fixes to improve reconnect after network failure
- improved caching of root directory contents (extending benefit of
directory leases)
- two DFS fixes
- three fixes for improved debugging
- an NTLMSSP fix for mounts t0 older servers
- new mount parm to allow disabling creating sparse files
- various cleanup fixes and minor fixes pointed out by coverity
* tag '5.19-rc-smb3-client-fixes-updated' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
smb3: remove unneeded null check in cifs_readdir
cifs: fix ntlmssp on old servers
cifs: cache the dirents for entries in a cached directory
cifs: avoid parallel session setups on same channel
cifs: use new enum for ses_status
cifs: do not use tcpStatus after negotiate completes
smb3: add mount parm nosparse
smb3: don't set rc when used and unneeded in query_info_compound
smb3: check for null tcon
cifs: fix minor compile warning
Add various fsctl structs
Add defines for various newer FSCTLs
smb3: add trace point for oplock not found
cifs: return the more nuanced writeback error on close()
smb3: add trace point for lease not found issue
cifs: smbd: fix typo in comment
cifs: set the CREATE_NOT_FILE when opening the directory in use_cached_dir()
cifs: check for smb1 in open_cached_dir()
cifs: move definition of cifs_fattr earlier in cifsglob.h
cifs: print TIDs as hex
...
Linus Torvalds [Fri, 27 May 2022 22:49:30 +0000 (15:49 -0700)]
Merge tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm and DAX updates from Dan Williams:
"New support for clearing memory errors when a file is in DAX mode,
alongside with some other fixes and cleanups.
Previously it was only possible to clear these errors using a truncate
or hole-punch operation to trigger the filesystem to reallocate the
block, now, any page aligned write can opportunistically clear errors
as well.
This change spans x86/mm, nvdimm, and fs/dax, and has received the
appropriate sign-offs. Thanks to Jane for her work on this.
Summary:
- Add support for clearing memory error via pwrite(2) on DAX
- Fix 'security overwrite' support in the presence of media errors
- Miscellaneous cleanups and fixes for nfit_test (nvdimm unit tests)"
* tag 'libnvdimm-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
pmem: implement pmem_recovery_write()
pmem: refactor pmem_clear_poison()
dax: add .recovery_write dax_operation
dax: introduce DAX_RECOVERY_WRITE dax access mode
mce: fix set_mce_nospec to always unmap the whole page
x86/mce: relocate set{clear}_mce_nospec() functions
acpi/nfit: rely on mce->misc to determine poison granularity
testing: nvdimm: asm/mce.h is not needed in nfit.c
testing: nvdimm: iomap: make __nfit_test_ioremap a macro
nvdimm: Allow overwrite in the presence of disabled dimms
tools/testing/nvdimm: remove unneeded flush_workqueue
Linus Torvalds [Fri, 27 May 2022 22:39:47 +0000 (15:39 -0700)]
Merge tag 'mfd-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support
- Add support for {Power,Home} Keys to MediaTek MT6359
- Add support for SC2730 to Spreadtrum SPRD SC27XX SPI
- Add support for additional Alder Lake-P I2C Controllers to Intel
LPSS PCI
Fix-ups:
- Convert GPIO to GPIOD (hi655x-pmic)
- Only register devices that exist (cros_ec_dev)
- Remove unused code (syscon, reg-mux)
- Rework .remove() API to return void (twl-core, rt4831)
- Trivial - whitespace, spelling, coding style (tps65218,
sprd-sc27xx-spi, google,cros-ec)
- DT binding changes (samsung,exynos5433-lpass, rockchip,rk805,
rockchip,rk808, rockchip,rk809, rockchip,rk817, rockchip,rk818,
wlf,arizona)
* tag 'mfd-next-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
dt-bindings: cros-ec: Fix a typo in description
dt-bindings: mfd: wlf,arizona: Add spi-max-frequency
mfd: rt4831: Improve error reporting for problems during .remove()
mfd: davinci_voicecodec: Fix possible null-ptr-deref davinci_vc_probe()
mfd: intel-lpss: Add support for ADL-P i2c6 and i2c7
dt-bindings: mfd: rk808: Convert bindings to yaml
mfd: twl4030: Make twl4030_exit_irq() return void
mfd: twl6030: Make twl6030_exit_irq() return void
dt-bindings: mfd: samsung,exynos5433-lpass: Fix 'dma-channels/requests' properties
mfd: sprd: Jugle {of,spi}_device_id tables into numerical order
mfd: sprd: Add SC2730 PMIC to SPI device ID table
dt-bindings: Drop undocumented i.MX iomuxc-gpr bindings in examples
mfd: cros_ec_dev: Only register PCHG device if present
mfd: mt6397-core: Add resources for PMIC keys for MT6359
mfd: mt6359: Add missing defines necessary for mtk-pmic-keys support
mfd: ipaq-micro: Fix error check return value of platform_get_irq()
mfd: hi655x-pmic: Replace legacy gpio interface for gpiod interface
mfd: tps65218: Fix trivial typo in comment
Linus Torvalds [Fri, 27 May 2022 22:33:24 +0000 (15:33 -0700)]
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Mainly driver updates this time around.
There's a single patch to the core clk framework that simplifies a
runtime PM call. Otherwise the majority of the diff falls to a few SoC
drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new
hardware support and what comes along with that is quite a few lines
of data and some clk_ops code.
Beyond the new hardware support we have the usual pile of driver
updates that add missing clks on already supported SoCs or fix up
problems like bad clk tree descriptions. It's nice to see that more
drivers are moving to clk_hw based APIs too.
New Drivers:
- Add STM32MP13 RCC driver (Reset Clock Controller)
- MediaTek MT8186 SoC clk support
- Airoha EN7523 SoC system clocks
- Clock driver for exynosautov9 SoC
- Renesas R-Car V4H and RZ/V2M SoCs
- Renesas RZ/G2UL SoC
- LPASS clk driver for Qualcomm sc7280 SoC
- GCC clk driver for Qualcomm SC8280XP SoC
Updates:
- SDCC uses floor clk ops on Qualcomm MSM8976
- Add modem reset and fix RPM clks on Qualcomm MSM8976
- Add the two missing CLKOUT clocks for U8500/DB8500 SoC
- Mark some clks critical on Ingenic X1000
- Convert ux500 to clk_hw
- Move MediaTek driver to clk_hw provider APIs
- Use i2c driver probe_new to avoid id scans
- Convert a number of Rockchip dt bindings to YAML
- Mark hclk_vo critical on Rockchip rk3568
- Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
- Various cleanups like memory allocation error checks and plugged
leaks
- Allwinner H6 RTC clock support
- Allwinner H616 32 kHz clock support
- Add the Universal Flash Storage clock on Renesas R-Car S4-8
- Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas
RZ/G2UL
- Add display clock support on Renesas RZ/G2L
- Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
- Add 27 MHz phy PLL ref clock on i.MX
- Add mcore_booted module parameter to tell kernel M core has already
booted for i.MX
- Remove snvs clock on i.MX because it was for secure world only
- Add dt bindings for i.MX8MN GPT
- Add DISP2 pixel clock for i.MX8MP
- Add clkout1/2 for i.MX8MP
- Fix parent clock of ubs_root_clk for i.MX8MP
- Implement better RCG parking on Qualcomm SoCs using the shared RCG
clk ops
- Kerneldoc fixes
- Switch Tegra BPMP to determine_rate clk op
- Add a pointer to dt schema for generic clock bindings"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits)
Revert "clk: qcom: regmap-mux: add pipe clk implementation"
Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
clk: stm32mp13: add safe mux management
clk: stm32mp13: add multi mux function
clk: stm32mp13: add all STM32MP13 kernel clocks
clk: stm32mp13: add all STM32MP13 peripheral clocks
clk: stm32mp13: manage secured clocks
clk: stm32mp13: add composite clock
clk: stm32mp13: add stm32 divider clock
clk: stm32mp13: add stm32_gate management
clk: stm32mp13: add stm32_mux clock management
clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
clk: ti: composite: Prefer kcalloc over open coded arithmetic
dt-bindings: clock: exynosautov9: correct count of NR_CLK
clk: mediatek: mt8173: Switch to clk_hw provider APIs
clk: mediatek: Switch to clk_hw provider APIs
...
Linus Torvalds [Fri, 27 May 2022 22:25:10 +0000 (15:25 -0700)]
Merge tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Resource management:
- Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas)
- Log E820 clipping better (Bjorn Helgaas)
- Add kernel cmdline options to enable/disable E820 clipping (Hans de
Goede)
- Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga
Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no
usable address space for touchpads, Thunderbolt devices, etc (Hans
de Goede)
- Disable E820 clipping by default starting in 2023 (Hans de Goede)
PCI device hotplug:
- Include files to remove implicit dependencies (Christophe Leroy)
- Only put Root Ports in D3 if they can signal and wake from D3 so
AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello)
Power management:
- Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since
it's unused otherwise (Krzysztof Kozlowski)
- Power up devices completely, including anything platform firmware
needs to do, during runtime resume (Rafael J. Wysocki)
- Move pci_resume_bus() to PM callbacks so we observe the required
bridge power-up delays (Rafael J. Wysocki)
- Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki)
- Split pci_raw_set_power_state() between pci_power_up() and a new
pci_set_low_power_state() (Rafael J. Wysocki)
- Set current_state to D3cold if config read returns ~0, indicating
the device is not accessible (Rafael J. Wysocki)
- Do not call pci_update_current_state() from pci_power_up() so BARs
and ASPM config are restored correctly (Rafael J. Wysocki)
- Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki)
- Split pci_power_up() to pci_set_full_power_state() to avoid some
redundant operations (Rafael J. Wysocki)
- Skip restoring BARs if device is not in D0 (Rafael J. Wysocki)
- Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki)
- Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J.
Wysocki)
Virtualization:
- Acquire device lock before config space access lock to avoid AB/BA
deadlock with sriov_numvfs_store() (Yicong Yang)
Error handling:
- Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously
leave permanently set (Kuppuswamy Sathyanarayanan)
Peer-to-peer DMA:
- Whitelist Intel Skylake-E Root Ports regardless of which devfn they
are (Shlomo Pongratz)
ASPM:
- Override L1 acceptable latency advertised by Intel DG2 so ASPM L1
can be enabled (Mika Westerberg)
Cadence PCIe controller driver:
- Set up device-specific register to allow PTM Responder to be
enabled by the normal architected bit (Christian Gmeiner)
- Override advertised FLR support since the controller doesn't
implement FLR correctly (Parshuram Thombare)
Cadence PCIe endpoint driver:
- Correct bitmap size for the ob_region_map of outbound window usage
(Dan Carpenter)
Freescale i.MX6 PCIe controller driver:
- Fix PERST# assertion/deassertion so we observe the required delays
before accessing device (Francesco Dolcini)
Freescale Layerscape PCIe controller driver:
- Add "big-endian" DT property (Hou Zhiqiang)
- Update SCFG DT property (Hou Zhiqiang)
- Add "aer", "pme", "intr" DT properties (Li Yang)
- Add DT compatible strings for ls1028a (Xiaowei Bao)
Intel VMD host bridge driver:
- Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt
remapping errors when MSI-X remapping is disabled (Nirmal Patel)
- Revert VMD workaround that kept MSI-X remapping enabled when IOMMU
remapping was enabled (Nirmal Patel)
Marvell MVEBU PCIe controller driver:
- Add of_pci_get_slot_power_limit() to parse the
'slot-power-limit-milliwatt' DT property (Pali Rohár)
- Add mvebu support for sending Set_Slot_Power_Limit message (Pali
Rohár)
MediaTek PCIe controller driver:
- Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin)
MediaTek PCIe Gen3 controller driver:
- Reset PHY and MAC at probe time (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi()
and mc_handle_intx() to avoid lost interrupts (Conor Dooley)
- Fix interrupt handling race (Daire McNamara)
NVIDIA Tegra194 PCIe controller driver:
- Drop tegra194 MSI register save/restore, which is unnecessary since
the DWC core does it (Jisheng Zhang)
Qualcomm PCIe controller driver:
- Add SM8150 SoC DT binding and support (Bhupesh Sharma)
- Fix pipe clock imbalance (Johan Hovold)
- Fix runtime PM imbalance on probe errors (Johan Hovold)
- Fix PHY init imbalance on probe errors (Johan Hovold)
- Convert DT binding to YAML (Dmitry Baryshkov)
- Update DT binding to show that resets aren't required for
MSM8996/APQ8096 platforms (Dmitry Baryshkov)
- Add explicit register names per chipset in DT binding (Dmitry
Baryshkov)
- Add sc7280-specific clock and reset definitions to DT binding
(Dmitry Baryshkov)
Rockchip PCIe controller driver:
- Fix bitmap size when searching for free outbound region (Dan
Carpenter)
Rockchip DesignWare PCIe controller driver:
- Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property
because it's not fully compatible with rockchip (Peter Geis)
- Reset rockchip-dwc controller at probe (Peter Geis)
- Add rockchip-dwc INTx support (Peter Geis)
Synopsys DesignWare PCIe controller driver:
- Return error instead of success if DMA mapping of MSI area fails
(Jiantao Zhang)
Miscellaneous:
- Change pci_set_dma_mask() documentation references to
dma_set_mask() (Alex Williamson)"
* tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits)
dt-bindings: PCI: qcom: Add schema for sc7280 chipset
dt-bindings: PCI: qcom: Specify reg-names explicitly
dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms
dt-bindings: PCI: qcom: Convert to YAML
PCI: qcom: Fix unbalanced PHY init on probe errors
PCI: qcom: Fix runtime PM imbalance on probe errors
PCI: qcom: Fix pipe clock imbalance
PCI: qcom: Add SM8150 SoC support
dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC
x86/PCI: Disable E820 reserved region clipping starting in 2023
x86/PCI: Disable E820 reserved region clipping via quirks
x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions
PCI: microchip: Fix potential race in interrupt handling
PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits
PCI: cadence: Clear FLR in device capabilities register
PCI: cadence: Allow PTM Responder to be enabled
PCI: vmd: Revert bfe96bbbe00d ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.")
PCI: vmd: Assign VMD IRQ domain before enumeration
PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
PCI: rockchip-dwc: Add legacy interrupt support
...
Chao Yu [Fri, 27 May 2022 04:13:30 +0000 (12:13 +0800)]
f2fs: fix to tag gcing flag on page during file defragment
In order to garantee migrated data be persisted during checkpoint,
otherwise out-of-order persistency between data and node may cause
data corruption after SPOR.
Signed-off-by: Chao Yu <chao.yu@oppo.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Linus Torvalds [Fri, 27 May 2022 18:40:49 +0000 (11:40 -0700)]
Merge tag 'mm-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- Two follow-on fixes for the post-5.19 series "Use pageblock_order for
cma and alloc_contig_range alignment", from Zi Yan.
- A series of z3fold cleanups and fixes from Miaohe Lin.
- Some memcg selftests work from Michal Koutný <mkoutny@suse.com>
- Some swap fixes and cleanups from Miaohe Lin
- Several individual minor fixups
* tag 'mm-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (25 commits)
mm/shmem.c: suppress shift warning
mm: Kconfig: reorganize misplaced mm options
mm: kasan: fix input of vmalloc_to_page()
mm: fix is_pinnable_page against a cma page
mm: filter out swapin error entry in shmem mapping
mm/shmem: fix infinite loop when swap in shmem error at swapoff time
mm/madvise: free hwpoison and swapin error entry in madvise_free_pte_range
mm/swapfile: fix lost swap bits in unuse_pte()
mm/swapfile: unuse_pte can map random data if swap read fails
selftests: memcg: factor out common parts of memory.{low,min} tests
selftests: memcg: remove protection from top level memcg
selftests: memcg: adjust expected reclaim values of protected cgroups
selftests: memcg: expect no low events in unprotected sibling
selftests: memcg: fix compilation
mm/z3fold: fix z3fold_page_migrate races with z3fold_map
mm/z3fold: fix z3fold_reclaim_page races with z3fold_free
mm/z3fold: always clear PAGE_CLAIMED under z3fold page lock
mm/z3fold: put z3fold page back into unbuddied list when reclaim or migration fails
revert "mm/z3fold.c: allow __GFP_HIGHMEM in z3fold_alloc"
mm/z3fold: throw warning on failure of trylock_page in z3fold_alloc
...
Linus Torvalds [Fri, 27 May 2022 18:29:35 +0000 (11:29 -0700)]
Merge tag 'mm-hotfixes-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"Six hotfixes.
The page_table_check one from Miaohe Lin is considered a minor thing
so it isn't marked for -stable. The remainder address pre-5.19 issues
and are cc:stable"
* tag 'mm-hotfixes-stable-2022-05-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/page_table_check: fix accessing unmapped ptep
kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]
mm/page_alloc: always attempt to allocate at least one page during bulk allocation
hugetlb: fix huge_pmd_unshare address update
zsmalloc: fix races between asynchronous zspage free and page migration
Revert "mm/cma.c: remove redundant cma_mutex lock"
Linus Torvalds [Fri, 27 May 2022 18:22:03 +0000 (11:22 -0700)]
Merge tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc updates from Andrew Morton:
"The non-MM patch queue for this merge window.
Not a lot of material this cycle. Many singleton patches against
various subsystems. Most notably some maintenance work in ocfs2
and initramfs"
* tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits)
kcov: update pos before writing pc in trace function
ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock
fs/ntfs: remove redundant variable idx
fat: remove time truncations in vfat_create/vfat_mkdir
fat: report creation time in statx
fat: ignore ctime updates, and keep ctime identical to mtime in memory
fat: split fat_truncate_time() into separate functions
MAINTAINERS: add Muchun as a memcg reviewer
proc/sysctl: make protected_* world readable
ia64: mca: drop redundant spinlock initialization
tty: fix deadlock caused by calling printk() under tty_port->lock
relay: remove redundant assignment to pointer buf
fs/ntfs3: validate BOOT sectors_per_clusters
lib/string_helpers: fix not adding strarray to device's resource list
kernel/crash_core.c: remove redundant check of ck_cmdline
ELF, uapi: fixup ELF_ST_TYPE definition
ipc/mqueue: use get_tree_nodev() in mqueue_get_tree()
ipc: update semtimedop() to use hrtimer
ipc/sem: remove redundant assignments
...
Baolin Wang [Fri, 27 May 2022 04:51:38 +0000 (12:51 +0800)]
arm64/hugetlb: Fix building errors in huge_ptep_clear_flush()
Fix the arm64 build error which was caused by commit 98a67024e7b2 ("mm:
change huge_ptep_clear_flush() to return the original pte") interacting
with commit 2add2b723503 ("arm64/hugetlb: Drop TLB flush from
get_clear_flush()"):
arch/arm64/mm/hugetlbpage.c: In function ‘huge_ptep_clear_flush’:
arch/arm64/mm/hugetlbpage.c:515:9: error: implicit declaration of function ‘get_clear_flush’; did you mean ‘ptep_clear_flush’? [-Werror=implicit-function-declaration]
515 | return get_clear_flush(vma->vm_mm, addr, ptep, pgsize, ncontig);
| ^~~~~~~~~~~~~~~
| ptep_clear_flush
Due to the new get_clear_contig() has dropped TLB flush, we should add
an explicit TLB flush in huge_ptep_clear_flush() to keep original
semantics when changing to use new get_clear_contig().
Fixes: 2add2b723503 ("arm64/hugetlb: Drop TLB flush from get_clear_flush()"). Fixes: 98a67024e7b2 ("mm: change huge_ptep_clear_flush() to return the original pte") Reported-and-tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Thu, 26 May 2022 06:34:52 +0000 (07:34 +0100)]
pipe: Fix missing lock in pipe_resize_ring()
pipe_resize_ring() needs to take the pipe->rd_wait.lock spinlock to
prevent post_one_notification() from trying to insert into the ring
whilst the ring is being replaced.
The occupancy check must be done after the lock is taken, and the lock
must be taken after the new ring is allocated.
The bug can lead to an oops looking something like:
BUG: KASAN: use-after-free in post_one_notification.isra.0+0x62e/0x840
Read of size 4 at addr ffff88801cc72a70 by task poc/27196
...
Call Trace:
post_one_notification.isra.0+0x62e/0x840
__post_watch_notification+0x3b7/0x650
key_create_or_update+0xb8b/0xd20
__do_sys_add_key+0x175/0x340
__x64_sys_add_key+0xbe/0x140
do_syscall_64+0x5c/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Reported by Selim Enes Karaduman @Enesdex working with Trend Micro Zero
Day Initiative.
Fixes: a23d9805b5b3 ("pipe: Add general notification queue support") Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-17291 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steve French [Thu, 26 May 2022 04:56:07 +0000 (23:56 -0500)]
smb3: remove unneeded null check in cifs_readdir
Coverity pointed out an unneeded check.
Addresses-Coverity: 1518030 ("Null pointer dereferences") Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Vlastimil Babka [Wed, 25 May 2022 11:25:59 +0000 (13:25 +0200)]
mm: Kconfig: reorganize misplaced mm options
After commits ec711d7b9634 ("mm: Kconfig: move swap and slab config
options to the MM section") and 085e1751a1b5 ("mm: Kconfig: group swap,
slab, hotplug and thp options into submenus") we now have nicely organized
mm related config options. I have noticed some that were still misplaced,
so this moves them from various places into the new structure:
VM_EVENT_COUNTERS, COMPAT_BRK, MMAP_ALLOW_UNINITIALIZED to mm/Kconfig and
general MM section.
SLUB_STATS to mm/Kconfig and the slab submenu.
DEBUG_SLAB, SLUB_DEBUG, SLUB_DEBUG_ON to mm/Kconfig.debug and the Kernel
hacking / Memory Debugging submenu.
Minchan Kim [Tue, 24 May 2022 17:15:25 +0000 (10:15 -0700)]
mm: fix is_pinnable_page against a cma page
Pages in the CMA area could have MIGRATE_ISOLATE as well as MIGRATE_CMA so
the current is_pinnable_page() could miss CMA pages which have
MIGRATE_ISOLATE. It ends up pinning CMA pages as longterm for the
pin_user_pages() API so CMA allocations keep failing until the pin is
released.
CPU 0 CPU 1 - Task B
cma_alloc
alloc_contig_range
pin_user_pages_fast(FOLL_LONGTERM)
change pageblock as MIGRATE_ISOLATE
internal_get_user_pages_fast
lockless_pages_from_mm
gup_pte_range
try_grab_folio
is_pinnable_page
return true;
So, pinned the page successfully.
page migration failure with pinned page
..
.. After 30 sec
unpin_user_page(page)
CMA allocation succeeded after 30 sec.
The CMA allocation path protects the migration type change race using
zone->lock but what GUP path need to know is just whether the page is on
CMA area or not rather than exact migration type. Thus, we don't need
zone->lock but just checks migration type in either of (MIGRATE_ISOLATE
and MIGRATE_CMA).
Adding the MIGRATE_ISOLATE check in is_pinnable_page could cause rejecting
of pinning pages on MIGRATE_ISOLATE pageblocks even though it's neither
CMA nor movable zone if the page is temporarily unmovable. However, such
a migration failure by unexpected temporal refcount holding is general
issue, not only come from MIGRATE_ISOLATE and the MIGRATE_ISOLATE is also
transient state like other temporal elevated refcount problem.
Link: https://lkml.kernel.org/r/20220524171525.976723-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Cc: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 19 May 2022 12:50:29 +0000 (20:50 +0800)]
mm/shmem: fix infinite loop when swap in shmem error at swapoff time
When swap in shmem error at swapoff time, there would be a infinite loop
in the while loop in shmem_unuse_inode(). It's because swapin error is
deliberately ignored now and thus info->swapped will never reach 0. So we
can't escape the loop in shmem_unuse().
In order to fix the issue, swapin_error entry is stored in the mapping
when swapin error occurs. So the swapcache page can be freed and the user
won't end up with a permanently mounted swap because a sector is bad. If
the page is accessed later, the user process will be killed so that
corrupted data is never consumed. On the other hand, if the page is never
accessed, the user won't even notice it.
Link: https://lkml.kernel.org/r/20220519125030.21486-5-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reported-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: NeilBrown <neilb@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 19 May 2022 12:50:28 +0000 (20:50 +0800)]
mm/madvise: free hwpoison and swapin error entry in madvise_free_pte_range
Once the MADV_FREE operation has succeeded, callers can expect they might
get zero-fill pages if accessing the memory again. Therefore it should be
safe to delete the hwpoison entry and swapin error entry. There is no
reason to kill the process if it has called MADV_FREE on the range.
Link: https://lkml.kernel.org/r/20220519125030.21486-4-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Suggested-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: NeilBrown <neilb@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 19 May 2022 12:50:27 +0000 (20:50 +0800)]
mm/swapfile: fix lost swap bits in unuse_pte()
This is observed by code review only but not any real report.
When we turn off swapping we could have lost the bits stored in the swap
ptes. The new rmap-exclusive bit is fine since that turned into a page
flag, but not for soft-dirty and uffd-wp. Add them.
Link: https://lkml.kernel.org/r/20220519125030.21486-3-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Suggested-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: David Howells <dhowells@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: NeilBrown <neilb@suse.de> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Thu, 19 May 2022 12:50:26 +0000 (20:50 +0800)]
mm/swapfile: unuse_pte can map random data if swap read fails
Patch series "A few fixup patches for mm", v4.
This series contains a few patches to avoid mapping random data if swap
read fails and fix lost swap bits in unuse_pte. Also we free hwpoison and
swapin error entry in madvise_free_pte_range and so on. More details can
be found in the respective changelogs.
This patch (of 5):
There is a bug in unuse_pte(): when swap page happens to be unreadable,
page filled with random data is mapped into user address space. In case
of error, a special swap entry indicating swap read fails is set to the
page table. So the swapcache page can be freed and the user won't end up
with a permanently mounted swap because a sector is bad. And if the page
is accessed later, the user process will be killed so that corrupted data
is never consumed. On the other hand, if the page is never accessed, the
user won't even notice it.
Link: https://lkml.kernel.org/r/20220519125030.21486-1-linmiaohe@huawei.com Link: https://lkml.kernel.org/r/20220519125030.21486-2-linmiaohe@huawei.com Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: David Howells <dhowells@redhat.com> Cc: NeilBrown <neilb@suse.de> Cc: Alistair Popple <apopple@nvidia.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Koutný [Wed, 18 May 2022 16:18:59 +0000 (18:18 +0200)]
selftests: memcg: factor out common parts of memory.{low,min} tests
The memory protection test setup and runtime is almost equal for
memory.low and memory.min cases.
It makes modification of the common parts prone to mistakes, since the
protections are similar not only in setup but also in principle, factor
the common part out.
Past exceptions between the tests:
- missing memory.min is fine (kept),
- test_memcg_low protected orphaned pagecache (adapted like
test_memcg_min and we keep the processes of protected memory running).
The evaluation in two tests is different (OOM of allocator vs low events
of protégés), this is kept different.
Link: https://lkml.kernel.org/r/20220518161859.21565-6-mkoutny@suse.com Signed-off-by: Michal Koutný <mkoutny@suse.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> CC: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Richard Palethorpe <rpalethorpe@suse.de> Cc: David Vernet <void@manifault.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Koutný [Wed, 18 May 2022 16:18:58 +0000 (18:18 +0200)]
selftests: memcg: remove protection from top level memcg
The reclaim is triggered by memory limit in a subtree, therefore the
testcase does not need configured protection against external reclaim.
Also, correct respective comments.
Link: https://lkml.kernel.org/r/20220518161859.21565-5-mkoutny@suse.com Signed-off-by: Michal Koutný <mkoutny@suse.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: David Vernet <void@manifault.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Richard Palethorpe <rpalethorpe@suse.de> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Koutný [Wed, 18 May 2022 16:18:57 +0000 (18:18 +0200)]
selftests: memcg: adjust expected reclaim values of protected cgroups
The numbers are not easy to derive in a closed form (certainly mere
protections ratios do not apply), therefore use a simulation to obtain
expected numbers.
Link: https://lkml.kernel.org/r/20220518161859.21565-4-mkoutny@suse.com Signed-off-by: Michal Koutný <mkoutny@suse.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: David Vernet <void@manifault.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Richard Palethorpe <rpalethorpe@suse.de> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Koutný [Wed, 18 May 2022 16:18:56 +0000 (18:18 +0200)]
selftests: memcg: expect no low events in unprotected sibling
This is effectively a revert of commit da2fde982a9f ("cgroup: account for
memory_recursiveprot in test_memcg_low()"). The case test_memcg_low will
fail with memory_recursiveprot until resolved in reclaim code.
However, this patch preserves the existing helpers and variables for later
uses.
Link: https://lkml.kernel.org/r/20220518161859.21565-3-mkoutny@suse.com Signed-off-by: Michal Koutný <mkoutny@suse.com> Reviewed-by: David Vernet <void@manifault.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Richard Palethorpe <rpalethorpe@suse.de> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Koutný [Wed, 18 May 2022 16:18:55 +0000 (18:18 +0200)]
selftests: memcg: fix compilation
Patch series "memcontrol selftests fixups", v2.
Flushing the patches to make memcontrol selftests check the events
behavior we had consensus about (test_memcg_low fails).
(test_memcg_reclaim, test_memcg_swap_max fail for me now but it's present
even before the refactoring.)
The two bigger changes are:
- adjustment of the protected values to make tests succeed with the given
tolerance,
- both test_memcg_low and test_memcg_min check protection of memory in
populated cgroups (actually as per Documentation/admin-guide/cgroup-v2.rst
memory.min should not apply to empty cgroups, which is not the case
currently. Therefore I unified tests with the populated case in order to to
bring more broken tests).
This patch (of 5):
This fixes mis-applied changes from commit 090faf0c743d ("cgroup: account
for memory_localevents in test_memcg_oom_group_leaf_events()").
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
mm/z3fold: fix z3fold_page_migrate races with z3fold_map
Think about the below scenario:
CPU1 CPU2
z3fold_page_migrate z3fold_map
z3fold_page_trylock
...
z3fold_page_unlock
/* slots still points to old zhdr*/
get_z3fold_header
get slots from handle
get old zhdr from slots
z3fold_page_trylock
return *old* zhdr
encode_handle(new_zhdr, FIRST|LAST|MIDDLE)
put_page(page) /* zhdr is freed! */
but zhdr is still used by caller!
z3fold_map can map freed z3fold page and lead to use-after-free bug. To
fix it, we add PAGE_MIGRATED to indicate z3fold page is migrated and soon
to be released. So get_z3fold_header won't return such page.
Link: https://lkml.kernel.org/r/20220429064051.61552-10-linmiaohe@huawei.com Fixes: c3da3aab5e27 ("mm/z3fold.c: support page migration") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
mm/z3fold: fix z3fold_reclaim_page races with z3fold_free
Think about the below scenario:
CPU1 CPU2
z3fold_reclaim_page z3fold_free
spin_lock(&pool->lock) get_z3fold_header -- hold page_lock
kref_get_unless_zero
kref_put--zhdr->refcount can be 1 now
!z3fold_page_trylock
kref_put -- zhdr->refcount is 0 now
release_z3fold_page
WARN_ON(!list_empty(&zhdr->buddy)); -- we're on buddy now!
spin_lock(&pool->lock); -- deadlock here!
z3fold_reclaim_page might race with z3fold_free and will lead to pool lock
deadlock and zhdr buddy non-empty warning. To fix this, defer getting the
refcount until page_lock is held just like what __z3fold_alloc does. Note
this has the side effect that we won't break the reclaim if we meet a soon
to be released z3fold page now.
Link: https://lkml.kernel.org/r/20220429064051.61552-9-linmiaohe@huawei.com Fixes: 594060dd2247 ("z3fold: stricter locking and more careful reclaim") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
mm/z3fold: put z3fold page back into unbuddied list when reclaim or migration fails
When doing z3fold page reclaim or migration, the page is removed from
unbuddied list. If reclaim or migration succeeds, it's fine as page is
released. But in case it fails, the page is not put back into unbuddied
list now. The page will be leaked until next compaction work, reclaim or
migration is done.
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
revert "mm/z3fold.c: allow __GFP_HIGHMEM in z3fold_alloc"
Revert commit b37d09c0e51a ("mm/z3fold.c: allow __GFP_HIGHMEM in
z3fold_alloc").
z3fold can't support GFP_HIGHMEM page now. page_address is used directly
at all places. Moreover, z3fold_header is on per cpu unbuddied list which
could be accessed anytime. So we should remove the support of GFP_HIGHMEM
allocation for z3fold.
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
mm/z3fold: throw warning on failure of trylock_page in z3fold_alloc
If trylock_page fails, the page won't be non-lru movable page. When this
page is freed via free_z3fold_page, it will trigger bug on PageMovable
check in __ClearPageMovable. Throw warning on failure of trylock_page to
guard against such rare case just as what zsmalloc does.
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
mm/z3fold: remove buggy use of stale list for allocation
Currently if z3fold couldn't find an unbuddied page it would first try to
pull a page off the stale list. But this approach is problematic. If
init z3fold page fails later, the page should be freed via
free_z3fold_page to clean up the relevant resource instead of using
__free_page directly. And if page is successfully reused, it will BUG_ON
later in __SetPageMovable because it's already non-lru movable page, i.e.
PAGE_MAPPING_MOVABLE is already set in page->mapping. In order to fix all
of these issues, we can simply remove the buggy use of stale list for
allocation because can_sleep should always be false and we never really
hit the reusing code path now.
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
mm/z3fold: fix possible null pointer dereferencing
alloc_slots could fail to allocate memory under heavy memory pressure. So
we should check zhdr->slots against NULL to avoid future null pointer
dereferencing.
Link: https://lkml.kernel.org/r/20220429064051.61552-3-linmiaohe@huawei.com Fixes: 6faa741f667a ("z3fold: simplify freeing slots") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Miaohe Lin [Fri, 29 Apr 2022 06:40:43 +0000 (14:40 +0800)]
mm/z3fold: fix sheduling while atomic
Patch series "A few fixup patches for z3fold".
This series contains a few fixup patches to fix sheduling while atomic,
fix possible null pointer dereferencing, fix various race conditions and
so on. More details can be found in the respective changelogs.
This patch (of 9):
z3fold's page_lock is always held when calling alloc_slots. So gfp should
be GFP_ATOMIC to avoid "scheduling while atomic" bug.
Zi Yan [Thu, 26 May 2022 23:15:31 +0000 (19:15 -0400)]
mm: split free page with properly free memory accounting and without race
In isolate_single_pageblock(), free pages are checked without holding zone
lock, but they can go away in split_free_page() when zone lock is held.
Check the free page and its order again in split_free_page() when zone lock
is held. Recheck the page if the free page is gone under zone lock.
In addition, in split_free_page(), the free page was deleted from the page
list without changing free page accounting. Add the missing free page
accounting code.
Fix the type of order parameter in split_free_page().
Zi Yan [Thu, 26 May 2022 23:15:30 +0000 (19:15 -0400)]
mm: page-isolation: skip isolated pageblock in start_isolate_page_range()
start_isolate_page_range() first isolates the first and the last
pageblocks in the range and ensure pages across range boundaries are split
during isolation. But it missed the case when the range is <= a pageblock
and the first and the last pageblocks are the same one, so the second
isolate_single_pageblock() will always fail. To fix it, skip the
pageblock isolation in second isolate_single_pageblock().
Link: https://lkml.kernel.org/r/20220526231531.2404977-1-zi.yan@sent.com Fixes: 9e28cd2b0dee ("mm: fix a potential infinite loop in start_isolate_page_range()") Signed-off-by: Zi Yan <ziy@nvidia.com> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/linux-mm/ac65adc0-a7e4-cdfe-a0d8-757195b86293@samsung.com/ Reported-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/linux-mm/8ca048ca8b547e0dd1c95387ee05c23d@walle.cc/ Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Hildenbrand <david@redhat.com> Cc: Doug Berger <opendmb@gmail.com> Cc: Eric Ren <renzhengeek@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Rapoport <rppt@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Cc: Qian Cai <quic_qiancai@quicinc.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB"
Using CPUID AuthenticAMD-25-21-0
0x6a0
0x6a8
New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
0x6a0
0x6a8
New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313)
mmap size 528384B
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
futex_wait_queue_me ([kernel.kallsyms])
futex_wait ([kernel.kallsyms])
do_futex ([kernel.kallsyms])
__x64_sys_futex ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
__futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so)
0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lore.kernel.org/lkml/Yo+i%252Fj5+UtE9dcix@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Sat, 21 May 2022 13:04:46 +0000 (21:04 +0800)]
perf scripts python: Support Arm CoreSight trace data disassembly
This commit adds python script to parse CoreSight tracing event and
print out source line and disassembly, it generates readable program
execution flow for easier humans inspecting.
The script receives CoreSight tracing packet with below format:
+------------+------------+------------+
packet(n): | addr | ip | cpu |
+------------+------------+------------+
packet(n+1): | addr | ip | cpu |
+------------+------------+------------+
packet::addr presents the start address of the coming branch sample, and
packet::ip is the last address of the branch smple. Therefore, a code
section between branches starts from packet(n)::addr and it stops at
packet(n+1)::ip. As results we combines the two continuous packets to
generate the address range for instructions:
[ sample(n)::addr .. sample(n+1)::ip ]
The script supports both objdump or llvm-objdump for disassembly with
specifying option '-d'. If doesn't specify option '-d', the script
simply outputs source lines and symbols.
Below shows usages with llvm-objdump or objdump to output disassembly.
Signed-off-by: Leo Yan <leo.yan@linaro.org> Co-authored-by: Al Grant <al.grant@arm.com> Co-authored-by: Mathieu Poirier <mathieu.poirier@linaro.org> Co-authored-by: Tor Jeremiassen <tor@ti.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Eelco Chaudron <echaudro@redhat.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Tanmay Jagdale <tanmay@marvell.com> Cc: coresight@lists.linaro.org Cc: zengshun . wu <zengshun.wu@outlook.com> Link: https://lore.kernel.org/r/20220521130446.4163597-3-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leo Yan [Sat, 21 May 2022 13:04:45 +0000 (21:04 +0800)]
perf scripting python: Expose dso and map information
This change adds dso build_id and corresponding map's start and end
address. The info of dso build_id can be used to find dso file path,
and we can validate if a branch address falls into the range of map's
start and end addresses.
In addition, the map's start address can be used as an offset for
disassembly.
Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Grant <al.grant@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Eelco Chaudron <echaudro@redhat.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Brennan <stephen.s.brennan@oracle.com> Cc: Tanmay Jagdale <tanmay@marvell.com> Cc: coresight@lists.linaro.org Cc: zengshun . wu <zengshun.wu@outlook.com> Link: https://lore.kernel.org/r/20220521130446.4163597-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Zhengjun Xing [Wed, 25 May 2022 14:04:10 +0000 (22:04 +0800)]
perf jevents: Fix event syntax error caused by ExtSel
In the origin code, when "ExtSel" is 1, the eventcode will change to
"eventcode |= 1 << 21”. For event “UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS",
its "ExtSel" is "1", its eventcode will change from 0x1E to 0x20001E,
but in fact the eventcode should <=0x1FF, so this will cause the parse
fail:
# perf stat -e "UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS" -a sleep 0.1
event syntax error: '.._RxL_CREDITS_CONSUMED_VN0.DRS'
\___ value too big for format, maximum is 511
On the perf kernel side, the kernel assumes the valid bits are continuous.
It will adjust the 0x100 (bit 8 for perf tool) to bit 21 in HW.
James Clark [Wed, 25 May 2022 15:41:14 +0000 (16:41 +0100)]
perf tools arm64: Add support for VG register
Add the name of the VG register so it can be used in --user-regs
The event will fail to open if the register is requested but not
available so only add it to the mask if the kernel supports sve and also
if it supports that specific register.
Committer notes:
Add conditional definition of HWCAP_SVE, as suggested by Leo Yan, to
build on older systems where this is not available in the system
headers.
Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: German Gomez <german.gomez@arm.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John Garry <john.garry@huawei.com> Cc: Mark Brown <broonie@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20220525154114.718321-6-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Miaohe Lin [Thu, 26 May 2022 11:33:50 +0000 (19:33 +0800)]
mm/page_table_check: fix accessing unmapped ptep
ptep is unmapped too early, so ptep could theoretically be accessed while
it's unmapped. This might become a problem if/when CONFIG_HIGHPTE becomes
available on riscv.
Fix it by deferring pte_unmap() until page table checking is done.
[akpm@linux-foundation.org: account for ptep alteration, per Matthew] Link: https://lkml.kernel.org/r/20220526113350.30806-1-linmiaohe@huawei.com Fixes: 4269401b16e6 ("mm/page_table_check: check entries at pmd levels") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Naveen N. Rao [Thu, 19 May 2022 09:12:37 +0000 (14:42 +0530)]
kexec_file: drop weak attribute from arch_kexec_apply_relocations[_add]
Since commit d1bcae833b32f1 ("ELF: Don't generate unused section
symbols") [1], binutils (v2.36+) started dropping section symbols that
it thought were unused. This isn't an issue in general, but with
kexec_file.c, gcc is placing kexec_arch_apply_relocations[_add] into a
separate .text.unlikely section and the section symbol ".text.unlikely"
is being dropped. Due to this, recordmcount is unable to find a non-weak
symbol in .text.unlikely to generate a relocation record against.
Address this by dropping the weak attribute from these functions.
Instead, follow the existing pattern of having architectures #define the
name of the function they want to override in their headers.
Mel Gorman [Thu, 26 May 2022 09:12:10 +0000 (10:12 +0100)]
mm/page_alloc: always attempt to allocate at least one page during bulk allocation
Peter Pavlisko reported the following problem on kernel bugzilla 216007.
When I try to extract an uncompressed tar archive (2.6 milion
files, 760.3 GiB in size) on newly created (empty) XFS file system,
after first low tens of gigabytes extracted the process hangs in
iowait indefinitely. One CPU core is 100% occupied with iowait,
the other CPU core is idle (on 2-core Intel Celeron G1610T).
It was bisected to bd6f5ecb904f ("xfs: use alloc_pages_bulk_array() for
buffers") but XFS is only the messenger. The problem is that nothing is
waking kswapd to reclaim some pages at a time the PCP lists cannot be
refilled until some reclaim happens. The bulk allocator checks that there
are some pages in the array and the original intent was that a bulk
allocator did not necessarily need all the requested pages and it was best
to return as quickly as possible.
This was fine for the first user of the API but both NFS and XFS require
the requested number of pages be available before making progress. Both
could be adjusted to call the page allocator directly if a bulk allocation
fails but it puts a burden on users of the API. Adjust the semantics to
attempt at least one allocation via __alloc_pages() before returning so
kswapd is woken if necessary.
It was reported via bugzilla that the patch addressed the problem and that
the tar extraction completed successfully. This may also address bug
215975 but has yet to be confirmed.
Mike Kravetz [Tue, 24 May 2022 20:50:03 +0000 (13:50 -0700)]
hugetlb: fix huge_pmd_unshare address update
The routine huge_pmd_unshare() is passed a pointer to an address
associated with an area which may be unshared. If unshare is successful
this address is updated to 'optimize' callers iterating over huge page
addresses. For the optimization to work correctly, address should be
updated to the last huge page in the unmapped/unshared area. However, in
the common case where the passed address is PUD_SIZE aligned, the address
is incorrectly updated to the address of the preceding huge page. That
wastes CPU cycles as the unmapped/unshared range is scanned twice.
Link: https://lkml.kernel.org/r/20220524205003.126184-1-mike.kravetz@oracle.com Fixes: 51baf743f83e ("shared page table for hugetlb page") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michael Ellerman [Fri, 27 May 2022 11:15:41 +0000 (21:15 +1000)]
powerpc/64: Include cache.h directly in paca.h
paca.h uses ____cacheline_aligned without directly including cache.h,
where it's defined.
For Book3S builds that's OK because paca.h includes lppaca.h, and it
does include cache.h.
But Book3E builds have been getting cache.h indirectly via printk.h,
which is dicey, and in fact that include was recently removed, leading
to build errors such as:
ld: fs/isofs/dir.o:(.bss+0x0): multiple definition of `____cacheline_aligned'; fs/isofs/namei.o:(.bss+0x0): first defined here
So include cache.h directly to fix the build error.
Fixes: f53819bf9b10 ("printk: stop including cache.h from printk.h") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Linus Torvalds [Fri, 27 May 2022 04:13:45 +0000 (21:13 -0700)]
Merge tag 'for-5.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Enable DM core bioset's per-cpu bio cache if QUEUE_FLAG_POLL set.
This change improves DM's hipri bio polling (REQ_POLLED) performance
by 7 - 20% depending on the system.
- Update DM core to use jump_labels to further reduce cost of unlikely
branches for zoned block devices, dm-stats and swap_bios throttling.
- Various DM core changes to reduce bio-based DM overhead and simplify
IO accounting.
- Fundamental DM core improvements to dm_io reference counting and the
elimination of using bio_split()+bio_chain() -- instead DM's
bio-based IO accounting is updated to account that a split occurred.
- Improve DM core's abnormal bio processing to do less work.
- Improve DM core's hipri polling support to use a single list rather
than an hlist.
- Update DM core to pass NULL bdev to bio_alloc_clone() so that
initialization that isn't useful for DM can be elided.
- Add cond_resched to DM stats' various loops that loop over all
entries.
- Fix incorrect error code return from DM integrity's constructor.
- Make DM crypt's printing of the key constant-time.
- Update bio-based DM multipath to provide high-resolution timer to the
Historical Service Time (HST) path selector.
* tag 'for-5.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits)
dm: pass NULL bdev to bio_alloc_clone
dm cache metadata: remove unnecessary variable in __dump_mapping
dm mpath: provide high-resolution timer to HST for bio-based
dm crypt: make printing of the key constant-time
dm integrity: fix error code in dm_integrity_ctr()
dm stats: add cond_resched when looping over entries
dm: improve abnormal bio processing
dm: simplify bio-based IO accounting further
dm: put all polled dm_io instances into a single list
dm: improve dm_io reference counting
dm: don't grab target io reference in dm_zone_map_bio
dm: improve bio splitting and associated IO accounting
dm: switch to bdev based IO accounting interfaces
dm: pass dm_io instance to dm_io_acct directly
dm: don't pass bio to __dm_start_io_acct and dm_end_io_acct
dm: use bio_sectors in dm_aceept_partial_bio
dm: simplify basic targets
dm: conditionally enable branching for less used features
dm: introduce dm_{get,put}_live_table_bio called from dm_submit_bio
dm: move hot dm_io members to same cacheline as dm_target_io
...
Linus Torvalds [Fri, 27 May 2022 04:08:40 +0000 (21:08 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Small collection of incremental improvement patches:
- Minor code cleanup patches, comment improvements, etc from static
tools
- Clean the some of the kernel caps, reducing the historical stealth
uAPI leftovers
- Bug fixes and minor changes for rdmavt, hns, rxe, irdma
- Remove unimplemented cruft from rxe
- Reorganize UMR QP code in mlx5 to avoid going through the IB verbs
layer
- flush_workqueue(system_unbound_wq) removal
- Ensure rxe waits for objects to be unused before allowing the core
to free them
- Several rc quality bug fixes for hfi1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (67 commits)
RDMA/rtrs-clt: Fix one kernel-doc comment
RDMA/hfi1: Remove all traces of diagpkt support
RDMA/hfi1: Consolidate software versions
RDMA/hfi1: Remove pointless driver version
RDMA/hfi1: Fix potential integer multiplication overflow errors
RDMA/hfi1: Prevent panic when SDMA is disabled
RDMA/hfi1: Prevent use of lock before it is initialized
RDMA/rxe: Fix an error handling path in rxe_get_mcg()
IB/core: Fix typo in comment
RDMA/core: Fix typo in comment
IB/hf1: Fix typo in comment
IB/qib: Fix typo in comment
IB/iser: Fix typo in comment
RDMA/mlx4: Avoid flush_scheduled_work() usage
IB/isert: Avoid flush_scheduled_work() usage
RDMA/mlx5: Remove duplicate pointer assignment in mlx5_ib_alloc_implicit_mr()
RDMA/qedr: Remove unnecessary synchronize_irq() before free_irq()
RDMA/hns: Use hr_reg_read() instead of remaining roce_get_xxx()
RDMA/hns: Use hr_reg_xxx() instead of remaining roce_set_xxx()
RDMA/irdma: Add SW mechanism to generate completions on error
...
Linus Torvalds [Fri, 27 May 2022 03:52:24 +0000 (20:52 -0700)]
Merge tag 'nfsd-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"We introduce 'courteous server' in this release. Previously NFSD would
purge open and lock state for an unresponsive client after one lease
period (typically 90 seconds). Now, after one lease period, another
client can open and lock those files and the unresponsive client's
lease is purged; otherwise if the unresponsive client's open and lock
state is uncontended, the server retains that open and lock state for
up to 24 hours, allowing the client's workload to resume after a
lengthy network partition.
A longstanding issue with NFSv4 file creation is also addressed.
Previously a file creation can fail internally, returning an error to
the client, but leave the newly created file in place as an artifact.
The file creation code path has been reorganized so that internal
failures and race conditions are less likely to result in an unwanted
file creation.
A fault injector has been added to help exercise paths that are run
during kernel metadata cache invalidation. These caches contain
information maintained by user space about exported filesystems. Many
of our test workloads do not trigger cache invalidation.
There is one patch that is needed to support PREEMPT_RT and a fix for
an ancient 'sleep while spin-locked' splat that seems to have become
easier to hit since v5.18-rc3"
* tag 'nfsd-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (36 commits)
NFSD: nfsd_file_put() can sleep
NFSD: Add documenting comment for nfsd4_release_lockowner()
NFSD: Modernize nfsd4_release_lockowner()
NFSD: Fix possible sleep during nfsd4_release_lockowner()
nfsd: destroy percpu stats counters after reply cache shutdown
nfsd: Fix null-ptr-deref in nfsd_fill_super()
nfsd: Unregister the cld notifier when laundry_wq create failed
SUNRPC: Use RMW bitops in single-threaded hot paths
NFSD: Clean up the show_nf_flags() macro
NFSD: Trace filecache opens
NFSD: Move documenting comment for nfsd4_process_open2()
NFSD: Fix whitespace
NFSD: Remove dprintk call sites from tail of nfsd4_open()
NFSD: Instantiate a struct file when creating a regular NFSv4 file
NFSD: Clean up nfsd_open_verified()
NFSD: Remove do_nfsd_create()
NFSD: Refactor NFSv4 OPEN(CREATE)
NFSD: Refactor NFSv3 CREATE
NFSD: Refactor nfsd_create_setattr()
NFSD: Avoid calling fh_drop_write() twice in do_nfsd_create()
...
projects / kernel.git / log