Rajeev Nandan [Sat, 26 Jun 2021 16:51:04 +0000 (22:21 +0530)]
drm/panel-simple: Support DP AUX backlight
If there is no backlight specified in the device tree and the panel
has access to the DP AUX channel then create a DP AUX backlight if
supported by the panel.
Rajeev Nandan [Sat, 26 Jun 2021 16:51:03 +0000 (22:21 +0530)]
drm/panel: add basic DP AUX backlight support
Some panels support backlight control over DP AUX channel using
VESA's standard backlight control interface.
Using new DRM eDP backlight helpers, add support to create and
register a backlight for those panels in drm_panel to simplify
the panel drivers.
The panel driver with access to "struct drm_dp_aux" can create and
register a backlight device using following code snippet in its
probe() function:
err = drm_panel_dp_aux_backlight(panel, aux);
if (err)
return err;
Then drm_panel will handle backlight_(enable|disable) calls
similar to the case when drm_panel_of_backlight() is used.
Currently, we are not supporting one feature where the source
device can combine the backlight brightness levels set through
DP AUX and the BL_PWM_DIM eDP connector pin. Since it's not
required for the basic backlight controls, it can be added later.
drm/gma500: Fix end of loop tests for list_for_each_entry
The list_for_each_entry() iterator, "connector" in this code, can never be
NULL. If we exit the loop without finding the correct connector then
"connector" points invalid memory that is an offset from the list head.
This will eventually lead to memory corruption and presumably a kernel
crash.
drm/vkms: Create a debugfs file to get vkms config data
Creating a vkms_config debugfs file in vkms_drv.c to get/track vkms config
data, for the long-term plan of making vkms configurable and have multiple
different instances.
There'a limit to how big a kmalloc buffer can be, and as memory gets
fragmented it becomes more difficult to get big buffers. The downside of
smaller buffers is that the driver has to split the transfer up which
hampers performance. Compression might also take a hit because of the
splitting.
Solve this by allocating the transfer buffer using vmalloc and create a
SG table to be passed on to the USB subsystem. vmalloc_32() is used to
avoid DMA bounce buffers on USB controllers that can only access 32-bit
addresses.
This also solves the problem that split transfers can give host side
tearing since flushing is decoupled from rendering.
usb_sg_wait() doesn't have timeout handling builtin, so it is wrapped in
a timer like 4 out of 6 users in the kernel have done.
v2:
- Use DIV_ROUND_UP (Linus)
- Add timeout note to the commit log (Linus)
- Expand note about upper buffer limit (Linus)
- Change var name s/timer/ctx/ in gud_usb_bulk_timeout()
Free transfer and compression buffers on device removal instead of at
DRM device removal time. This ensures that the usual 2x8MB buffers are
released when the device is unplugged and not kept around should
userspace keep the DRM device fd open.
At least Ubuntu 20.04 doesn't release the DRM device on unplug.
The damage_lock mutex is not destroyed because it is used outside the
drm_dev_enter/exit block in gud_pipe_update(). AFAICT it's possible for
an open fbdev descriptor to trigger a commit after the USB device is gone.
drm/hisilicon/hibmc: Convert to Linux IRQ interfaces
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
Vmwgfx already uses Linux IRQ functions. All that's left to replace
is the reference to struct drm_device.irq. Use irq value of struct
pci_dev instead.
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
The function qxl_gem_prime_mmap() returns an error. The two callers
of gem_prime_mmap are drm_fbdev_fb_mmap() and drm_gem_dmabuf_mmap(),
which both already handle NULL-callbacks with an error code. So clear
gem_prime_mmap in qxl and remove qxl_gem_prime_mmap().
Tim Gover [Mon, 28 Jun 2021 13:05:33 +0000 (15:05 +0200)]
drm: vc4: Fix pixel-wrap issue with DVP teardown
Adjust the DVP enable/disable sequence to avoid a pixel getting stuck
in an internal, non resettable FIFO within PixelValve when changing
HDMI resolution.
The blank pixels features of the DVP can prevent signals back to
pixelvalve causing it to not clear the FIFO. Adjust the ordering
and timing of operations to ensure the clear signal makes it through to
pixelvalve.
drm/vc4: hdmi: Limit noise when deferring snd card registration
We don't want to print an error message each time
devm_snd_soc_register_card() returns -EPROBE_DEFER, the function will
most likely succeed some time in the future, once the missing resources
are available. So use dev_err_probe(), which will redirect the messages
to the debug log level in such case.
Moving the driver-specific mmap code into a GEM object function allows
for using DRM helpers for various mmap callbacks.
The respective vgem functions are being removed. The file_operations
structure vgem_driver_fops is now being created by the helper macro
DEFINE_DRM_GEM_FOPS().
Inline mgag200_device_init() into mgag200_device_create(), which is
the only caller. Also remove a duplicate error message for
mgag200_modeset_init(). The function will print an error if/where it
failed.
v2:
* include a note about the removed error message in
changelog (Sam)
The bochs driver is only ~600 lines of code. Putting it into tiny/
cleans up the DRM directory slightly. Some style problems were fixed
and unneeded include statements were removed. No functional changes.
v2:
* make bochs_mode_funcs static (Daniel, kernel test robot)
* rebase onto aperture API changes
Melissa Wen [Sat, 26 Jun 2021 09:26:55 +0000 (10:26 +0100)]
drm/vkms: update the current status of todo list
Update:
- debugging issues on igt testcases
- plane composition features: add primary plane improvements
- suggestions of good tasks to start working on vkms
Drop:
- syzkaller bug report:
what triggered the warning was replaced by shmem functions at
https://patchwork.freedesktop.org/patch/394614/
- overlay plane: this feature was added by
https://patchwork.freedesktop.org/patch/430941/
drm/aperture: Pass DRM driver structure instead of driver name
Print the name of the DRM driver when taking over fbdev devices. Makes
the output to dmesg more consistent. Note that the driver name is only
used for printing a string to the kernel log. No UAPI is affected by this
change.
Boris Brezillon [Wed, 30 Jun 2021 06:27:51 +0000 (08:27 +0200)]
drm/panfrost: Increase the AS_ACTIVE polling timeout
Experience has shown that 1ms is sometimes not enough, even when the GPU
is running at its maximum frequency, not to mention that an MMU operation
might take longer if the GPU is running at a lower frequency, which is
likely to be the case if devfreq is active.
Let's pick a significantly bigger timeout value (1ms -> 100ms) to be on
the safe side.
Steven Price [Wed, 30 Jun 2021 06:27:50 +0000 (08:27 +0200)]
drm/panfrost: Queue jobs on the hardware
The hardware has a set of '_NEXT' registers that can hold a second job
while the first is executing. Make use of these registers to enqueue a
second job per slot.
v5:
* Fix a comment in panfrost_job_init()
v3:
* Fix the done/err job dequeuing logic to get a valid active state
* Only enable the second slot on GPUs supporting jobchain disambiguation
* Split interrupt handling in sub-functions
Boris Brezillon [Wed, 30 Jun 2021 06:27:45 +0000 (08:27 +0200)]
drm/panfrost: Make sure job interrupts are masked before resetting
This is not yet needed because we let active jobs be killed during by
the reset and we don't really bother making sure they can be restarted.
But once we start adding soft-stop support, controlling when we deal
with the remaining interrrupts and making sure those are handled before
the reset is issued gets tricky if we keep job interrupts active.
Let's prepare for that and mask+flush job IRQs before issuing a reset.
v4:
* Add a comment explaining why we WARN_ON(!job) in the irq handler
* Keep taking the job_lock when evicting stalled jobs
Boris Brezillon [Wed, 30 Jun 2021 06:27:44 +0000 (08:27 +0200)]
drm/panfrost: Simplify the reset serialization logic
Now that we can pass our own workqueue to drm_sched_init(), we can use
an ordered workqueue on for both the scheduler timeout tdr and our own
reset work (which we use when the reset is not caused by a fault/timeout
on a specific job, like when we have AS_ACTIVE bit stuck). This
guarantees that the timeout handlers and reset handler can't run
concurrently which drastically simplifies the locking.
v5:
* Don't call cancel_delayed_timeout() in the reset path (those works
are canceled in drm_sched_stop())
v4:
* Actually pass the reset workqueue to drm_sched_init()
* Don't call cancel_work_sync() in panfrost_reset(). It will deadlock
since it might be called from the reset work, which is executing and
cancel_work_sync() will wait for the handler to return. Checking the
reset pending status should avoid spurious resets
Boris Brezillon [Wed, 30 Jun 2021 06:27:41 +0000 (08:27 +0200)]
drm/panfrost: Do the exception -> string translation using a table
Do the exception -> string translation using a table. This way we get
rid of those magic numbers and can easily add new fields if we need
to attach extra information to exception types.
v4:
* Don't expose exception type to userspace
* Merge the enum definition and the enum -> string table declaration
in the same patch
Boris Brezillon [Wed, 30 Jun 2021 06:27:37 +0000 (08:27 +0200)]
drm/sched: Allow using a dedicated workqueue for the timeout/fault tdr
Mali Midgard/Bifrost GPUs have 3 hardware queues but only a global GPU
reset. This leads to extra complexity when we need to synchronize timeout
works with the reset work. One solution to address that is to have an
ordered workqueue at the driver level that will be used by the different
schedulers to queue their timeout work. Thanks to the serialization
provided by the ordered workqueue we are guaranteed that timeout
handlers are executed sequentially, and can thus easily reset the GPU
from the timeout handler without extra synchronization.
v5:
* Add a new paragraph to the timedout_job() method
v3:
* New patch
v4:
* Actually use the timeout_wq to queue the timeout work
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Christian König <christian.koenig@amd.com> Cc: Qiang Yu <yuq825@gmail.com> Cc: Emma Anholt <emma@anholt.net> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210630062751.2832545-3-boris.brezillon@collabora.com
Mikel Rychliski [Thu, 24 Jun 2021 04:51:20 +0000 (00:51 -0400)]
drm/radeon: Fix NULL dereference when updating memory stats
radeon_ttm_bo_destroy() is attempting to access the resource object to
update memory counters. However, the resource object is already freed when
ttm calls this function via the destroy callback. This causes an oops when
a bo is freed:
Avoid the issue by updating the counters in the delete_mem_notify callback
instead. Also, fix memory statistic updating in radeon_bo_move() to
identify the source type correctly. The source type needs to be saved
before the move, because the moved from object may be altered by the move.
Fixes: bfa3357ef9ab ("drm/ttm: allocate resource object instead of embedding it v2") Signed-off-by: Mikel Rychliski <mikel@mikelr.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210624045121.15643-1-mikel@mikelr.com
drm/vmwgfx: Don't set struct drm_device.irq_enabled
The field drm_device.irq_enabled is only used by legacy drivers
with userspace modesetting. Don't set it in vmxgfx. All usage of
the field within vmwgfx can safely be removed.
drm/omapdrm: Track IRQ state in local device state
Replace usage of struct drm_device.irq_enabled with the driver's
own state field struct omap_drm_device.irq_enabled. The field in
the DRM device structure is considered legacy and should not be
used by KMS drivers.
Replace usage of struct drm_device.irq_enabled with the driver's
own state field struct drm_i915_private.irq_enabled. The field in
the DRM device structure is considered legacy and should not be
used by KMS drivers.
For KMS drivers, replace the IRQ check in VBLANK ioctls with a check for
vblank support. IRQs might be enabled wthout vblanking being supported.
This change also removes the DRM framework's only dependency on IRQ state
for non-legacy drivers. For legacy drivers with userspace modesetting,
the original test remains in drm_wait_vblank_ioctl().
v4:
* avoid preprocessor ifdef in drm_wait_vblank_ioctl()
(Jani, Thierry)
v3:
* optimize test in drm_wait_vblank_ioctl() for KMS case (Liviu)
* update docs for drm_irq_uninstall()
v2:
* keep the old test for legacy drivers in
drm_wait_vblank_ioctl() (Daniel)
Replace usage of struct drm_device.irq_enabled with the driver's
own state field struct radeon_device.irq.installed. The field in
the DRM device structure is considered legacy and should not be
used by KMS drivers.
Remove the check around drm_irq_uninstall(). The same test is
done by the function internally. The tested state in irq_enabled
is considered obsolete and should not be used by KMS drivers.
Replace usage of struct drm_device.irq_enabled with the driver's
own state field struct amdgpu_device.irq.installed. The field in
the DRM device structure is considered legacy and should not be
used by KMS drivers.
Boris Brezillon [Thu, 24 Jun 2021 14:08:50 +0000 (16:08 +0200)]
drm/sched: Declare entity idle only after HW submission
The panfrost driver tries to kill in-flight jobs on FD close after
destroying the FD scheduler entities. For this to work properly, we
need to make sure the jobs popped from the scheduler entities have
been queued at the HW level before declaring the entity idle, otherwise
we might iterate over a list that doesn't contain those jobs.
Daniel Vetter [Wed, 23 Jun 2021 16:24:56 +0000 (18:24 +0200)]
drm/simple-helper: drm_gem_simple_display_pipe_prepare_fb as default
It's tedious to review this all the time, and my audit showed that
arcpgu actually forgot to set this.
Make this the default and stop worrying.
Again I sprinkled WARN_ON_ONCE on top to make sure we don't have
strange combinations of hooks: cleanup_fb without prepare_fb doesn't
make sense, and since simpler drivers are all new they better be GEM
based drivers.
v2: Warn and bail when it's _not_ a GEM driver (Noralf)
v3: It's neither ... nor, not not (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Noralf Trønnes <noralf@tronnes.org> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210623162456.3373469-1-daniel.vetter@ffwll.ch
Like we have for the shadow helpers too, and roll it out to drivers.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Tian Tao <tiantao6@hisilicon.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-11-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 22 Jun 2021 16:55:05 +0000 (18:55 +0200)]
drm/armada: Remove prepare/cleanup_fb hooks
All they do is refcount the fb, which the atomic helpers already do.
This is was necessary with the legacy helpers and I guess just carry
over in the conversion. drm_plane_state always has a full reference
for its ->fb pointer during its entire lifetime,
see __drm_atomic_helper_plane_destroy_state()
Daniel Vetter [Wed, 23 Jun 2021 16:22:00 +0000 (18:22 +0200)]
drm/atomic-helper: make drm_gem_plane_helper_prepare_fb the default
There's a bunch of atomic drivers who don't do this quite correctly,
luckily most of them aren't in wide use or people would have noticed
the tearing.
By making this the default we avoid the constant audit pain and can
additionally remove a ton of lines from vfuncs for a bit more clarity
in smaller drivers.
While at it complain if there's a cleanup_fb hook but no prepare_fb
hook, because that makes no sense. I haven't found any driver which
violates this, but better safe than sorry.
Subsequent patches will reap the benefits.
v2: It's neither ... nor, not not (Sam)
Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210623162200.3372056-1-daniel.vetter@ffwll.ch
and that last boolean controls whether the exclusive or shared fence
slot is used.
- radeon follows this contract by setting
p->relocs[i].tv.num_shared = !r->write_domain;
in radeon_cs_parser_relocs(), which ensures that the call to
ttm_eu_fence_buffer_objects() in radeon_cs_parser_fini() will do the
right thing.
- vmwgfx seems to follow this contract with the shotgun approach of
always setting ttm_val_buf->num_shared = 0, which means
ttm_eu_fence_buffer_objects() will only use the exclusive slot.
- etnaviv follows this contract, as can be trivially seen by looking
at submit_attach_object_fences()
- i915 is a bit a convoluted maze with multiple paths leading to
i915_vma_move_to_active(). Which sets the exclusive flag if
EXEC_OBJECT_WRITE is set. This can either come as a buffer flag for
softpin mode, or through the write_domain when using relocations. It
follows this contract.
- lima follows this contract, see lima_gem_submit() which sets the
exclusive fence when the LIMA_SUBMIT_BO_WRITE flag is set for that
bo
- msm follows this contract, see msm_gpu_submit() which sets the
exclusive flag when the MSM_SUBMIT_BO_WRITE is set for that buffer
- panfrost follows this contract with the shotgun approach of just
always setting the exclusive fence, see
panfrost_attach_object_fences(). Benefits of a single engine I guess
- v3d follows this contract with the same shotgun approach in
v3d_attach_fences_and_unlock_reservation(), but it has at least an
XXX comment that maybe this should be improved
- v4c uses the same shotgun approach of always setting an exclusive
fence, see vc4_update_bo_seqnos()
- vgem also follows this contract, see vgem_fence_attach_ioctl() and
the VGEM_FENCE_WRITE. This is used in some igts to validate prime
sharing with i915.ko without the need of a 2nd gpu
- vritio follows this contract again with the shotgun approach of
always setting an exclusive fence, see virtio_gpu_array_add_fence()
This covers the setting of the exclusive fences when writing.
Synchronizing against the exclusive fence is a lot more tricky, and I
only spot checked a few:
- i915 does it, with the optional EXEC_OBJECT_ASYNC to skip all
implicit dependencies (which is used by vulkan)
- etnaviv does this. Implicit dependencies are collected in
submit_fence_sync(), again with an opt-out flag
ETNA_SUBMIT_NO_IMPLICIT. These are then picked up in
etnaviv_sched_dependency which is the
drm_sched_backend_ops->dependency callback.
- v4c seems to not do much here, maybe gets away with it by not having
a scheduler and only a single engine. Since all newer broadcom chips than
the OG vc4 use v3d for rendering, which follows this contract, the
impact of this issue is fairly small.
- v3d does this using the drm_gem_fence_array_add_implicit() helper,
which then it's drm_sched_backend_ops->dependency callback
v3d_job_dependency() picks up.
- panfrost is nice here and tracks the implicit fences in
panfrost_job->implicit_fences, which again the
drm_sched_backend_ops->dependency callback panfrost_job_dependency()
picks up. It is mildly questionable though since it only picks up
exclusive fences in panfrost_acquire_object_fences(), but not buggy
in practice because it also always sets the exclusive fence. It
should pick up both sets of fences, just in case there's ever going
to be a 2nd gpu in a SoC with a mali gpu. Or maybe a mali SoC with a
pcie port and a real gpu, which might actually happen eventually. A
bug, but easy to fix. Should probably use the
drm_gem_fence_array_add_implicit() helper.
- lima is nice an easy, uses drm_gem_fence_array_add_implicit() and
the same schema as v3d.
- msm is mildly entertaining. It also supports MSM_SUBMIT_NO_IMPLICIT,
but because it doesn't use the drm/scheduler it handles fences from
the wrong context with a synchronous dma_fence_wait. See
submit_fence_sync() leading to msm_gem_sync_object(). Investing into
a scheduler might be a good idea.
- all the remaining drivers are ttm based, where I hope they do
appropriately obey implicit fences already. I didn't do the full
audit there because a) not follow the contract would confuse ttm
quite well and b) reading non-standard scheduler and submit code
which isn't based on drm/scheduler is a pain.
Onwards to the display side.
- Any driver using the drm_gem_plane_helper_prepare_fb() helper will
correctly. Overwhelmingly most drivers get this right, except a few
totally dont. I'll follow up with a patch to make this the default
and avoid a bunch of bugs.
- I didn't audit the ttm drivers, but given that dma_resv started
there I hope they get this right.
In conclusion this IS the contract, both as documented and
overwhelmingly implemented, specically as implemented by all render
drivers except amdgpu.
drm/amdgpu: fix using shared fence for exported BOs v2
but this fix falls short on a number of areas:
- It's racy, by the time the buffer is shared it might be too late. To
make sure there's definitely never a problem we need to set the
fences correctly for any buffer that's potentially exportable.
- It's breaking uapi, dma-buf fds support poll() and differentitiate
between, which was introduced in
Rejecting new development because your own driver is broken and
violates established cross driver contracts and uapi is really not
how upstream works.
Now this patch will have a severe performance impact on anything that
runs on multiple engines. So we can't just merge it outright, but need
a bit a plan:
- amdgpu needs a proper uapi for handling implicit fencing. The funny
thing is that to do it correctly, implicit fencing must be treated
as a very strange IPC mechanism for transporting fences, where both
setting the fence and dependency intercepts must be handled
explicitly. Current best practices is a per-bo flag to indicate
writes, and a per-bo flag to to skip implicit fencing in the CS
ioctl as a new chunk.
- Since amdgpu has been shipping with broken behaviour we need an
opt-out flag from the butchered implicit fencing model to enable the
proper explicit implicit fencing model.
- for kernel memory fences due to bo moves at least the i915 idea is
to use ttm_bo->moving. amdgpu probably needs the same.
- since the current p2p dma-buf interface assumes the kernel memory
fence is in the exclusive dma_resv fence slot we need to add a new
fence slot for kernel fences, which must never be ignored. Since
currently only amdgpu supports this there's no real problem here
yet, until amdgpu gains a NO_IMPLICIT CS flag.
- New userspace needs to ship in enough desktop distros so that users
wont notice the perf impact. I think we can ignore LTS distros who
upgrade their kernels but not their mesa3d snapshot.
- Then when this is all in place we can merge this patch here.
What is not a solution to this problem here is trying to make the
dma_resv rules in the kernel more clever. The fundamental issue here
is that the amdgpu CS uapi is the least expressive one across all
drivers (only equalled by panfrost, which has an actual excuse) by not
allowing any userspace control over how implicit sync is conducted.
Until this is fixed it's completely pointless to make the kernel more
clever to improve amdgpu, because all we're doing is papering over
this uapi design issue. amdgpu needs to attain the status quo
established by other drivers first, once that's achieved we can tackle
the remaining issues in a consistent way across drivers.
v2: Bas pointed me at AMDGPU_GEM_CREATE_EXPLICIT_SYNC, which I
entirely missed.
This is great because it means the amdgpu specific piece for proper
implicit fence handling exists already, and that since a while. The
only thing that's now missing is
- fishing the implicit fences out of a shared object at the right time
- setting the exclusive implicit fence slot at the right time.
Jason has a patch series to fill that gap with a bunch of generic
ioctl on the dma-buf fd:
Use the audit covered in this commit message as the excuse to update
the dma-buf docs around dma_buf.resv usage across drivers.
Since dynamic importers have different rules also hammer these in
again while we're at it.
v4:
- Add the missing "through the device" in the dynamic section that I
overlooked.
- Fix a kerneldoc markup mistake, the link didn't connect
v5:
- A few s/should/must/ to make clear what must be done (if the driver
does implicit sync) and what's more a maybe (Daniel Stone)
- drop all the example api discussion, that needs to be expanded,
clarified and put into a new chapter in drm-uapi.rst (Daniel Stone)
Cc: Daniel Stone <daniel@fooishbar.org> Acked-by: Daniel Stone <daniel@fooishbar.org> Reviewed-by: Dave Airlie <airlied@redhat.com> (v4) Reviewed-by: Christian König <christian.koenig@amd.com> (v3) Cc: mesa-dev@lists.freedesktop.org Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl> Cc: Dave Airlie <airlied@gmail.com> Cc: Rob Clark <robdclark@chromium.org> Cc: Kristian H. Kristensen <hoegsberg@google.com> Cc: Michel Dänzer <michel@daenzer.net> Cc: Daniel Stone <daniels@collabora.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Deepak R Varma <mh12gx2825@gmail.com> Cc: Chen Li <chenli@uniontech.com> Cc: Kevin Wang <kevin1.wang@amd.com> Cc: Dennis Li <Dennis.Li@amd.com> Cc: Luben Tuikov <luben.tuikov@amd.com> Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210624125246.166721-1-daniel.vetter@ffwll.ch
Daniel Vetter [Wed, 23 Jun 2021 16:17:12 +0000 (18:17 +0200)]
dma-buf: Switch to inline kerneldoc
Also review & update everything while we're at it.
This is prep work to smash a ton of stuff into the kerneldoc for
@resv.
v2: Move the doc for sysfs_entry.attachment_uid to the right place too
(Sam)
Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Christian König <christian.koenig@amd.com> Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Cc: Nirmoy Das <nirmoy.das@amd.com> Cc: Deepak R Varma <mh12gx2825@gmail.com> Cc: Chen Li <chenli@uniontech.com> Cc: Kevin Wang <kevin1.wang@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20210623161712.3370885-1-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 22 Jun 2021 16:55:10 +0000 (18:55 +0200)]
drm/gem: Tiny kernel clarification for drm_gem_fence_array_add
Spotted while trying to convert panfrost to these.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-15-daniel.vetter@ffwll.ch
Laurent Pinchart [Thu, 24 Jun 2021 00:02:59 +0000 (03:02 +0300)]
dt-bindings: drm/bridge: ti-sn65dsi8: Make enable GPIO optional
The SN65DSI86 EN pin can be hardwired to a high level, or connected to a
global reset signal, not controllable by the kernel. Make it optional in
those cases.
Boris Brezillon [Mon, 21 Jun 2021 13:38:56 +0000 (15:38 +0200)]
drm/panfrost: Make sure MMU context lifetime is not bound to panfrost_priv
Jobs can be in-flight when the file descriptor is closed (either because
the process did not terminate properly, or because it didn't wait for
all GPU jobs to be finished), and apparently panfrost_job_close() does
not cancel already running jobs. Let's refcount the MMU context object
so it's lifetime is no longer bound to the FD lifetime and running jobs
can finish properly without generating spurious page faults.
Daniel Vetter [Tue, 22 Jun 2021 16:55:02 +0000 (18:55 +0200)]
drm/panfrost: Fix implicit sync
Currently this has no practial relevance I think because there's not
many who can pull off a setup with panfrost and another gpu in the
same system. But the rules are that if you're setting an exclusive
fence, indicating a gpu write access in the implicit fencing system,
then you need to wait for all fences, not just the previous exclusive
fence.
panfrost against itself has no problem, because it always sets the
exclusive fence (but that's probably something that will need to be
fixed for vulkan and/or multi-engine gpus, or you'll suffer badly).
Also no problem with that against display.
With the prep work done to switch over to the dependency helpers this
is now a oneliner.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Steven Price <steven.price@arm.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20210622165511.3169559-7-daniel.vetter@ffwll.ch
Daniel Vetter [Tue, 22 Jun 2021 16:55:01 +0000 (18:55 +0200)]
drm/panfrost: Use xarray and helpers for depedency tracking
More consistency and prep work for the next patch.
Aside: I wonder whether we shouldn't just move this entire xarray
business into the scheduler so that not everyone has to reinvent the
same wheels. Cc'ing some scheduler people for this too.
v2: Correctly handle sched_lock since Lucas pointed out it's needed.
projects / kernel.git / log