Zhen Lei [Mon, 10 May 2021 06:38:05 +0000 (14:38 +0800)]
drm/msm/dpu: Fix error return code in dpu_mdss_init()
The error code returned by platform_get_irq() is stored in 'irq', it's
forgotten to be copied to 'ret' before being returned. As a result, the
value 0 of 'ret' is returned incorrectly.
After the above fix is completed, initializing the local variable 'ret'
to 0 is no longer needed, remove it.
In addition, when dpu_mdss_init() is successfully returned, the value of
'ret' is always 0. Therefore, replace "return ret" with "return 0" to make
the code clearer.
Fixes: 070e64dc1bbc ("drm/msm/dpu: Convert to a chained irq chip") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210510063805.3262-2-thunder.leizhen@huawei.com Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
drm/msm/disp/dpu1: avoid perf update in frame done event
Crtc perf update from frame event work can result in
wrong bandwidth and clock update from dpu if the work
is scheduled after the swap state has happened.
Avoid such issues by moving perf update to complete
commit once the frame is accepted by the hardware.
Fixes: a29c8c024165 ("drm/msm/disp/dpu1: fix display underruns during modeset") Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org> Tested-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/1622092076-5100-1-git-send-email-mkrishn@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
Stephen Boyd [Fri, 30 Apr 2021 19:31:04 +0000 (12:31 -0700)]
drm/msm/disp: Move various debug logs to atomic bucket
These prints flood the logs with drm debugging set to enable kms and
driver logging (DRM_UT_KMS and DRM_UT_DRIVER). Let's move these prints
to the atomic bucket (DRM_UT_ATOMIC) as they're related to the atomic
paths.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: Kuogee Hsieh <khsieh@codeaurora.org> Cc: aravindh@codeaurora.org Cc: Sean Paul <sean@poorly.run> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210430193104.1770538-7-swboyd@chromium.org Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
Stephen Boyd [Fri, 30 Apr 2021 19:31:02 +0000 (12:31 -0700)]
drm/msm: Move FB debug prints to drm_dbg_state()
These are verbose prints that tell us about the framebuffer state. Let's
move them to drm_dbg_state() so that they're only printed if we're
interested in verbose state logging while drm debugging.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: Kuogee Hsieh <khsieh@codeaurora.org> Cc: aravindh@codeaurora.org Cc: Sean Paul <sean@poorly.run> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210430193104.1770538-5-swboyd@chromium.org Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rob Clark <robdclark@chromium.org>
Dmitry Baryshkov [Sun, 16 May 2021 20:29:11 +0000 (23:29 +0300)]
drm/msm/dpu: simplify IRQ enabling/disabling
Merge dpu_core_irq_enable() into dpu_core_irq_register_callback() and
dpu_core_irq_disable() into dpu_core_irq_unregister_callback(), because
they are called in pairs. There is no need to have separate
enable/disable pair, we can enable hardware IRQ when first callback is
registered and when the last callback is unregistered.
Dmitry Baryshkov [Sun, 16 May 2021 20:29:09 +0000 (23:29 +0300)]
drm/msm/dpu: replace IRQ lookup with the data in hw catalog
The IRQ table in the dpu_hw_interrupts.h is big, ugly, and hard to
maintain. There are only few interrupts used from that table. Newer
generations use different IRQ locations. Move this data to hw catalog.
Always call dpu_hw_intr_clear_intr_status_nolock() from the
dpu_hw_intr_dispatch_irqs(). This simplifies the callback function
(which call clears the interrupts anyway) and enforces clearing the hw
interrupt status.
Dmitry Baryshkov [Sun, 16 May 2021 20:29:06 +0000 (23:29 +0300)]
drm/msm/dpu: merge dpu_hw_intr_get_interrupt_statuses into dpu_hw_intr_dispatch_irqs
There is little sense in reading interrupt statuses and right after that
going after the array of statuses to dispatch them. Merge both loops
into single function doing read and dispatch.
Stephen Boyd [Fri, 7 May 2021 21:25:05 +0000 (14:25 -0700)]
drm/msm/dp: Handle aux timeouts, nacks, defers
Let's look at the irq status bits after a transfer and see if we got a
nack or a defer or a timeout, instead of telling drm layers that
everything was fine, while still printing an error message. I wasn't
sure about NACK+DEFER so I lumped all those various errors along with a
nack so that the drm core can figure out that things are just not going
well. The important thing is that we're now returning -ETIMEDOUT when
the message times out and nacks for bad addresses.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: Kuogee Hsieh <khsieh@codeaurora.org> Cc: aravindh@codeaurora.org Cc: Sean Paul <sean@poorly.run> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Kuogee Hsieh <khsieh@codeaurora.org> Link: https://lore.kernel.org/r/20210507212505.1224111-4-swboyd@chromium.org Signed-off-by: Rob Clark <robdclark@chromium.org>
Stephen Boyd [Fri, 7 May 2021 21:25:04 +0000 (14:25 -0700)]
drm/msm/dp: Shrink locking area of dp_aux_transfer()
We don't need to hold the lock to inspect the message we're going to
transfer, and we don't need to clear the busy flag either. Take the lock
later and bail out earlier if conditions aren't met.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: Kuogee Hsieh <khsieh@codeaurora.org> Cc: aravindh@codeaurora.org Cc: Sean Paul <sean@poorly.run> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Kuogee Hsieh <khsieh@codeaurora.org> Link: https://lore.kernel.org/r/20210507212505.1224111-3-swboyd@chromium.org Signed-off-by: Rob Clark <robdclark@chromium.org>
Stephen Boyd [Fri, 7 May 2021 21:25:03 +0000 (14:25 -0700)]
drm/msm/dp: Simplify aux irq handling code
We don't need to stash away 'isr' in the aux structure to pass to two
functions. Let's use a local variable instead. And we can complete the
completion variable in one place instead of two to simplify the code.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Cc: Kuogee Hsieh <khsieh@codeaurora.org> Cc: aravindh@codeaurora.org Cc: Sean Paul <sean@poorly.run> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Kuogee Hsieh <khsieh@codeaurora.org> Link: https://lore.kernel.org/r/20210507212505.1224111-2-swboyd@chromium.org Signed-off-by: Rob Clark <robdclark@chromium.org>
Dmitry Baryshkov [Thu, 27 May 2021 22:03:30 +0000 (01:03 +0300)]
drm/msm: fix display snapshotting if DP or DSI is disabled
Fix following warnings generated when either DP or DSI support is
disabled:
drivers/gpu/drm/msm/disp/msm_disp_snapshot_util.c:141:3: error: implicit declaration of function 'msm_dp_snapshot'; did you mean 'msm_dsi_snapshot'? [-Werror=implicit-function-declaration]
drivers/gpu/drm/msm/msm_kms.h:127:26: warning: 'struct msm_disp_state' declared inside parameter list will not be visible outside of this definition or declaration
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c:867:21: error: initialization of 'void (*)(struct msm_disp_state *, struct msm_kms *)' from incompatible pointer type 'void (*)(struct msm_disp_state *, struct msm_kms *)' [-Werror=incompatible-pointer-types]
drivers/gpu/drm/msm/dsi/dsi.h:94:30: warning: 'struct msm_disp_state' declared inside parameter list will not be visible outside of this definition or declaration
Reported-by: kernel test robot <lkp@intel.com> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Fixes: 1c3b7ac1a71d ("drm/msm: pass dump state as a function argument") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org> Link: https://lore.kernel.org/r/20210527220330.3364716-1-dmitry.baryshkov@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org>
Jonathan Marek [Fri, 23 Apr 2021 19:08:18 +0000 (15:08 -0400)]
drm/msm: replace MSM_BO_UNCACHED with MSM_BO_WC for internal objects
msm_gem_get_vaddr() currently always maps as writecombine, so use the right
flag instead of relying on broken behavior (things don't actually work if
they are mapped as uncached).
drm/msm: make msm_disp_state transient data struct
Instead of allocating snapshotting structure at the driver probe time
and later handling concurrent access, actual state, etc, make
msm_disp_state transient struct. Allocate one when snapshotting happens
and free it after coredump data is read by userspace.
Add the msm_disp_snapshot module which adds supports to dump dpu
registers and capture the drm atomic state which can be used in
case of error conditions.
changes in v5:
- start storing disp_state in msm_kms instead of dpu_kms
- get rid of MSM_DISP_SNAPSHOT_IN_* enum by simplifying the functions
- move snprintf inside the snapshot core by using varargs
- get rid of some stale code comments
- allow snapshot module for non-DPU targets
drm: allow drm_atomic_print_state() to accept any drm_printer
Currently drm_atomic_print_state() internally allocates and uses a
drm_info printer. Allow it to accept any drm_printer type so that
the API can be leveraged even for taking drm snapshot.
Rename the drm_atomic_print_state() to drm_atomic_print_new_state()
so that it reflects its functionality better.
changes in v5:
- none
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1618606645-19695-2-git-send-email-abhinavk@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
Kuogee Hsieh [Fri, 21 May 2021 22:25:30 +0000 (15:25 -0700)]
drm/msm/dp: handle irq_hpd with sink_count = 0 correctly
irq_hpd interrupt should be handled after dongle plugged in and
before dongle unplugged. Hence irq_hpd interrupt is enabled at
the end of the plugin handle and disabled at the beginning of
unplugged handle. Current irq_hpd with sink_count = 0 is wrongly
handled same as the dongle unplugged which tears down the mainlink
and disables the phy. This patch fixes this problem by only tearing
down the mainlink but keeping phy enabled at irq_hpd with
sink_count = 0 handle so that next irq_hpd with sink_count =1 can be
handled by setup mainlink only. This patch also set dongle into D3
(power off) state at end of handling irq_hpd with sink_count = 0.
Changes in v2:
-- add ctrl->phy_Power_count
Changes in v3:
-- del ctrl->phy_Power_count
-- add phy_power_off to dp_ctrl_off_link_stream()
Changes in v4:
-- return immediately if clock disable failed at dp_ctrl_off_link_stream()
Changes in v5:
-- set dongle to D3 (power off) state at dp_ctrl_off_link_stream()
Changes in v6:
-- add Fixes tag
Fixes: ea9f337ce81e ("drm/msm/dp: reset dp controller only at boot up and pm_resume") Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1621635930-30161-1-git-send-email-khsieh@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org>
Stephen Boyd [Tue, 8 Jun 2021 19:55:19 +0000 (12:55 -0700)]
drm/msm/dsi: Stash away calculated vco frequency on recalc
A problem was reported on CoachZ devices where the display wouldn't come
up, or it would be distorted. It turns out that the PLL code here wasn't
getting called once dsi_pll_10nm_vco_recalc_rate() started returning the
same exact frequency, down to the Hz, that the bootloader was setting
instead of 0 when the clk was registered with the clk framework.
After commit 001d8dc33875 ("drm/msm/dsi: remove temp data from global
pll structure") we use a hardcoded value for the parent clk frequency,
i.e. VCO_REF_CLK_RATE, and we also hardcode the value for FRAC_BITS,
instead of getting it from the config structure. This combination of
changes to the recalc function allows us to properly calculate the
frequency of the PLL regardless of whether or not the PLL has been
clk_prepare()d or clk_set_rate()d. That's a good improvement.
Unfortunately, this means that now we won't call down into the PLL clk
driver when we call clk_set_rate() because the frequency calculated in
the framework matches the frequency that is set in hardware. If the rate
is the same as what we want it should be OK to not call the set_rate PLL
op. The real problem is that the prepare op in this driver uses a
private struct member to stash away the vco frequency so that it can
call the set_rate op directly during prepare. Once the set_rate op is
never called because recalc_rate told us the rate is the same, we don't
set this private struct member before the prepare op runs, so we try to
call the set_rate function directly with a frequency of 0. This
effectively kills the PLL and configures it for a rate that won't work.
Calling set_rate from prepare is really quite bad and will confuse any
downstream clks about what the rate actually is of their parent. Fixing
that will be a rather large change though so we leave that to later.
For now, let's stash away the rate we calculate during recalc so that
the prepare op knows what frequency to set, instead of 0. This way
things keep working and the display can enable the PLL properly. In the
future, we should remove that code from the prepare op so that it
doesn't even try to call the set rate function.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Abhinav Kumar <abhinavk@codeaurora.org> Fixes: 001d8dc33875 ("drm/msm/dsi: remove temp data from global pll structure") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210608195519.125561-1-swboyd@chromium.org Signed-off-by: Rob Clark <robdclark@chromium.org>
Jonathan Marek [Thu, 13 May 2021 17:14:00 +0000 (13:14 -0400)]
drm/msm/a6xx: avoid shadow NULL reference in failure path
If a6xx_hw_init() fails before creating the shadow_bo, the a6xx_pm_suspend
code referencing it will crash. Change the condition to one that avoids
this problem (note: creation of shadow_bo is behind this same condition)
Fixes: e8b0b994c3a5 ("drm/msm/a6xx: Clear shadow on suspend") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/20210513171431.18632-6-jonathan@marek.ca Signed-off-by: Rob Clark <robdclark@chromium.org>
Jonathan Marek [Thu, 13 May 2021 17:13:58 +0000 (13:13 -0400)]
drm/msm/a6xx: fix incorrectly set uavflagprd_inv field for A650
Value was shifted in the wrong direction, resulting in the field always
being zero, which is incorrect for A650.
Fixes: d0bac4e9cd66 ("drm/msm/a6xx: set ubwc config for A640 and A650") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/20210513171431.18632-4-jonathan@marek.ca Signed-off-by: Rob Clark <robdclark@chromium.org>
Update CP_PROTECT register programming based on downstream.
A6XX_PROTECT_RW is renamed to A6XX_PROTECT_NORDWR to make things aligned
and also be more clear about what it does.
Note that this required switching to use the CP_ALWAYS_ON_COUNTER as the
GMU counter is not accessible from the cmdstream. Which also means
using the CPU counter for the msm_gpu_submit_flush() tracepoint (as
catapult depends on being able to compare this to the start/end values
captured in cmdstream). This may need to be revisited when IFPC is
enabled.
Also, compared to downstream, this opens up CP_PERFCTR_CP_SEL as the
userspace performance tooling (fdperf and pps-producer) expect to be
able to configure the CP counters.
Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org> Link: https://lore.kernel.org/r/20210513171431.18632-5-jonathan@marek.ca
[switch to CP_ALWAYS_ON_COUNTER, open up CP_PERFCNTR_CP_SEL, and spiff
up commit msg] Signed-off-by: Rob Clark <robdclark@chromium.org>
Linus Torvalds [Sun, 23 May 2021 16:32:40 +0000 (06:32 -1000)]
Merge tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Two perf fixes:
- Do not check the LBR_TOS MSR when setting up unrelated LBR MSRs as
this can cause malfunction when TOS is not supported
- Allocate the LBR XSAVE buffers along with the DS buffers upfront
because allocating them when adding an event can deadlock"
* tag 'perf-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/lbr: Remove cpuc->lbr_xsave allocation from atomic context
perf/x86: Avoid touching LBR_TOS MSR for Arch LBR
Linus Torvalds [Sun, 23 May 2021 16:30:08 +0000 (06:30 -1000)]
Merge tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Thomas Gleixner:
"Two locking fixes:
- Invoke the lockdep tracepoints in the correct place so the ordering
is correct again
- Don't leave the mutex WAITER bit stale when the last waiter is
dropping out early due to a signal as that forces all subsequent
lock operations needlessly into the slowpath until it's cleaned up
again"
* tag 'locking-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/mutex: clear MUTEX_FLAGS if wait_list is empty due to signal
locking/lockdep: Correct calling tracepoints
Linus Torvalds [Sun, 23 May 2021 16:28:20 +0000 (06:28 -1000)]
Merge tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A few fixes for irqchip drivers:
- Allocate interrupt descriptors correctly on Mainstone PXA when
SPARSE_IRQ is enabled; otherwise the interrupt association fails
- Make the APPLE AIC chip driver depend on APPLE
- Remove redundant error output on devm_ioremap_resource() failure"
* tag 'irq-urgent-2021-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: Remove redundant error printing
irqchip/apple-aic: APPLE_AIC should depend on ARCH_APPLE
ARM: PXA: Fix cplds irqdesc allocation when using legacy mode
Linus Torvalds [Sun, 23 May 2021 16:12:25 +0000 (06:12 -1000)]
Merge tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix how SEV handles MMIO accesses by forwarding potential page faults
instead of killing the machine and by using the accessors with the
exact functionality needed when accessing memory.
- Fix a confusion with Clang LTO compiler switches passed to the it
- Handle the case gracefully when VMGEXIT has been executed in
userspace
* tag 'x86_urgent_for_v5.13_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev-es: Use __put_user()/__get_user() for data accesses
x86/sev-es: Forward page-faults which happen during emulation
x86/sev-es: Don't return NULL from sev_es_get_ghcb()
x86/build: Fix location of '-plugin-opt=' flags
x86/sev-es: Invalidate the GHCB after completing VMGEXIT
x86/sev-es: Move sev_es_put_ghcb() in prep for follow on patch
Linus Torvalds [Sun, 23 May 2021 16:07:33 +0000 (06:07 -1000)]
Merge tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix breakage of strace (and other ptracers etc.) when using the new
scv ABI (Power9 or later with glibc >= 2.33).
- Fix early_ioremap() on 64-bit, which broke booting on some machines.
Thanks to Dmitry V. Levin, Nicholas Piggin, Alexey Kardashevskiy, and
Christophe Leroy.
* tag 'powerpc-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/syscall: Fix ptrace syscall info with scv syscalls
powerpc/64s/syscall: Use pt_regs.trap to distinguish syscall ABI difference between sc and scv syscalls
powerpc: Fix early setup to make early_ioremap() work
Linus Torvalds [Sun, 23 May 2021 01:20:20 +0000 (15:20 -1000)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"10 patches.
Subsystems affected by this patch series: mm (pagealloc, gup, kasan,
and userfaultfd), ipc, selftests, watchdog, bitmap, procfs, and lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
userfaultfd: hugetlbfs: fix new flag usage in error path
lib: kunit: suppress a compilation warning of frame size
proc: remove Alexey from MAINTAINERS
linux/bits.h: fix compilation error with GENMASK
watchdog: reliable handling of timestamps
kasan: slab: always reset the tag in get_freepointer_safe()
tools/testing/selftests/exec: fix link error
ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry
Revert "mm/gup: check page posion status for coredump."
mm/shuffle: fix section mismatch warning
Mike Kravetz [Sun, 23 May 2021 00:42:11 +0000 (17:42 -0700)]
userfaultfd: hugetlbfs: fix new flag usage in error path
In commit d6995da31122 ("hugetlb: use page.private for hugetlb specific
page flags") the use of PagePrivate to indicate a reservation count
should be restored at free time was changed to the hugetlb specific flag
HPageRestoreReserve. Changes to a userfaultfd error path as well as a
VM_BUG_ON() in remove_inode_hugepages() were overlooked.
Users could see incorrect hugetlb reserve counts if they experience an
error with a UFFDIO_COPY operation. Specifically, this would be the
result of an unlikely copy_huge_page_from_user error. There is not an
increased chance of hitting the VM_BUG_ON.
Link: https://lkml.kernel.org/r/20210521233952.236434-1-mike.kravetz@oracle.com Fixes: d6995da31122 ("hugetlb: use page.private for hugetlb specific page flags") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mina Almasry <almasry.mina@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: David Hildenbrand <david@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Mina Almasry <almasrymina@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhen Lei [Sun, 23 May 2021 00:42:08 +0000 (17:42 -0700)]
lib: kunit: suppress a compilation warning of frame size
lib/bitfield_kunit.c: In function `test_bitfields_constants':
lib/bitfield_kunit.c:93:1: warning: the frame size of 7456 bytes is larger than 2048 bytes [-Wframe-larger-than=]
}
^
As the description of BITFIELD_KUNIT in lib/Kconfig.debug, it "Only useful
for kernel devs running the KUnit test harness, and not intended for
inclusion into a production build". Therefore, it is not worth modifying
variable 'test_bitfields_constants' to clear this warning. Just suppress
it.
Rikard Falkeborn [Sun, 23 May 2021 00:42:02 +0000 (17:42 -0700)]
linux/bits.h: fix compilation error with GENMASK
GENMASK() has an input check which uses __builtin_choose_expr() to
enable a compile time sanity check of its inputs if they are known at
compile time.
However, it turns out that __builtin_constant_p() does not always return
a compile time constant [0]. It was thought this problem was fixed with
gcc 4.9 [1], but apparently this is not the case [2].
Switch to use __is_constexpr() instead which always returns a compile time
constant, regardless of its inputs.
Petr Mladek [Sun, 23 May 2021 00:41:59 +0000 (17:41 -0700)]
watchdog: reliable handling of timestamps
Commit 9bf3bc949f8a ("watchdog: cleanup handling of false positives")
tried to handle a virtual host stopped by the host a more
straightforward and cleaner way.
But it introduced a risk of false softlockup reports. The virtual host
might be stopped at any time, for example between
kvm_check_and_clear_guest_paused() and is_softlockup(). As a result,
is_softlockup() might read the updated jiffies and detects a softlockup.
A solution might be to put back kvm_check_and_clear_guest_paused() after
is_softlockup() and detect it. But it would put back the cycle that
complicates the logic.
In fact, the handling of all the timestamps is not reliable. The code
does not guarantee when and how many times the timestamps are read. For
example, "period_ts" might be touched anytime also from NMI and re-read in
is_softlockup(). It works just by chance.
Fix all the problems by making the code even more explicit.
1. Make sure that "now" and "period_ts" timestamps are read only once.
They might be changed at anytime by NMI or when the virtual guest is
stopped by the host. Note that "now" timestamp does this implicitly
because "jiffies" is marked volatile.
2. "now" time must be read first. The state of "period_ts" will
decide whether it will be used or the period will get restarted.
3. kvm_check_and_clear_guest_paused() must be called before reading
"period_ts". It touches the variable when the guest was stopped.
As a result, "now" timestamp is used only when the watchdog was not
touched and the guest not stopped in the meantime. "period_ts" is
restarted in all other situations.
Link: https://lkml.kernel.org/r/YKT55gw+RZfyoFf7@alley Fixes: 9bf3bc949f8aeefeacea4b ("watchdog: cleanup handling of false positives") Signed-off-by: Petr Mladek <pmladek@suse.com> Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yang Yingliang [Sun, 23 May 2021 00:41:53 +0000 (17:41 -0700)]
tools/testing/selftests/exec: fix link error
Fix the link error by adding '-static':
gcc -Wall -Wl,-z,max-page-size=0x1000 -pie load_address.c -o /home/yang/linux/tools/testing/selftests/exec/load_address_4096
/usr/bin/ld: /tmp/ccopEGun.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `stderr@@GLIBC_2.17' which may bind externally can not be used when making a shared object; recompile with -fPIC
/usr/bin/ld: /tmp/ccopEGun.o(.text+0x158): unresolvable R_AARCH64_ADR_PREL_PG_HI21 relocation against symbol `stderr@@GLIBC_2.17'
/usr/bin/ld: final link failed: bad value
collect2: error: ld returned 1 exit status
make: *** [Makefile:25: tools/testing/selftests/exec/load_address_4096] Error 1
Link: https://lkml.kernel.org/r/20210514092422.2367367-1-yangyingliang@huawei.com Fixes: 206e22f01941 ("tools/testing/selftests: add self-test for verifying load alignment") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Cc: Chris Kennelly <ckennelly@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Varad Gautam [Sun, 23 May 2021 00:41:49 +0000 (17:41 -0700)]
ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry
do_mq_timedreceive calls wq_sleep with a stack local address. The
sender (do_mq_timedsend) uses this address to later call pipelined_send.
This leads to a very hard to trigger race where a do_mq_timedreceive
call might return and leave do_mq_timedsend to rely on an invalid
address, causing the following crash:
1. do_mq_timedreceive calls wq_sleep with the address of `struct
ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it
holds a valid `struct ext_wait_queue *` as long as the stack has not
been overwritten.
2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and
do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call
__pipelined_op.
3. Sender calls __pipelined_op::smp_store_release(&this->state,
STATE_READY). Here is where the race window begins. (`this` is
`ewq_addr`.)
4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it
will see `state == STATE_READY` and break.
5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed
to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's
stack. (Although the address may not get overwritten until another
function happens to touch it, which means it can persist around for an
indefinite time.)
6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a
`struct ext_wait_queue *`, and uses it to find a task_struct to pass to
the wake_q_add_safe call. In the lucky case where nothing has
overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct.
In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a
bogus address as the receiver's task_struct causing the crash.
do_mq_timedsend::__pipelined_op() should not dereference `this` after
setting STATE_READY, as the receiver counterpart is now free to return.
Change __pipelined_op to call wake_q_add_safe on the receiver's
task_struct returned by get_task_struct, instead of dereferencing `this`
which sits on the receiver's stack.
As Manfred pointed out, the race potentially also exists in
ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare. Fix
those in the same way.
Link: https://lkml.kernel.org/r/20210510102950.12551-1-varad.gautam@suse.com Fixes: c5b2cbdbdac563 ("ipc/mqueue.c: update/document memory barriers") Fixes: 8116b54e7e23ef ("ipc/sem.c: document and update memory barriers") Fixes: 0d97a82ba830d8 ("ipc/msg.c: update and document memory barriers") Signed-off-by: Varad Gautam <varad.gautam@suse.com> Reported-by: Matthias von Faber <matthias.vonfaber@aox-tech.de> Acked-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Manfred Spraul <manfred@colorfullife.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Sun, 23 May 2021 00:41:46 +0000 (17:41 -0700)]
Revert "mm/gup: check page posion status for coredump."
While reviewing [1] I came across commit d3378e86d182 ("mm/gup: check
page posion status for coredump.") and noticed that this patch is broken
in two ways. First it doesn't really prevent hwpoison pages from being
dumped because hwpoison pages can be marked asynchornously at any time
after the check. Secondly, and more importantly, the patch introduces a
ref count leak because get_dump_page takes a reference on the page which
is not released.
It also seems that the patch was merged incorrectly because there were
follow up changes not included as well as discussions on how to address
the underlying problem [2]
Arnd Bergmann [Sun, 23 May 2021 00:41:43 +0000 (17:41 -0700)]
mm/shuffle: fix section mismatch warning
clang sometimes decides not to inline shuffle_zone(), but it calls a
__meminit function. Without the extra __meminit annotation we get this
warning:
WARNING: modpost: vmlinux.o(.text+0x2a86d4): Section mismatch in reference from the function shuffle_zone() to the function .meminit.text:__shuffle_zone()
The function shuffle_zone() references
the function __meminit __shuffle_zone().
This is often because shuffle_zone lacks a __meminit
annotation or the annotation of __shuffle_zone is wrong.
shuffle_free_memory() did not show the same problem in my tests, but it
could happen in theory as well, so mark both as __meminit.
Link: https://lkml.kernel.org/r/20210514135952.2928094-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tag 'block-5.13-2021-05-22' of git://git.kernel.dk/linux-block:
block: fix a race between del_gendisk and BLKRRPART
block: prevent block device lookups at the beginning of del_gendisk
nvme-fc: clear q_live at beginning of association teardown
nvme-tcp: rerun io_work if req_list is not empty
nvme-tcp: fix possible use-after-completion
nvme-loop: fix memory leak in nvme_loop_create_ctrl()
nvmet: fix memory leak in nvmet_alloc_ctrl()
Linus Torvalds [Sat, 22 May 2021 17:33:09 +0000 (07:33 -1000)]
Merge tag 'for-linus-5.13b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- a fix for a boot regression when running as PV guest on hardware
without NX support
- a small series fixing a bug in the Xen pciback driver when
configuring a PCI card with multiple virtual functions
* tag 'for-linus-5.13b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-pciback: reconfigure also from backend watch handler
xen-pciback: redo VF placement in the virtual topology
x86/Xen: swap NX determination and GDT setup on BSP
Linus Torvalds [Fri, 21 May 2021 23:24:12 +0000 (13:24 -1000)]
Merge tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes:
- fix unaligned compressed writes in zoned mode
- fix false positive lockdep warning when cloning inline extent
- remove wrong BUG_ON in tree-log error handling"
* tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix parallel compressed writes
btrfs: zoned: pass start block to btrfs_use_zone_append
btrfs: do not BUG_ON in link_to_fixup_dir
btrfs: release path before starting transaction when cloning inline extent
Linus Torvalds [Fri, 21 May 2021 23:12:51 +0000 (13:12 -1000)]
Merge tag '5.13-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Seven smb3 fixes: one for stable, three others fix problems found in
testing handle leases, and a compounded request fix"
* tag '5.13-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6:
Fix KASAN identified use-after-free issue.
Defer close only when lease is enabled.
Fix kernel oops when CONFIG_DEBUG_ATOMIC_SLEEP is enabled.
cifs: Fix inconsistent indenting
cifs: fix memory leak in smb2_copychunk_range
SMB3: incorrect file id in requests compounded with open
cifs: remove deadstore in cifs_close_all_deferred_files()
Linus Torvalds [Fri, 21 May 2021 16:31:34 +0000 (06:31 -1000)]
Merge tag 'mmc-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- Fix SD-card detection on Intel NUC10i3FNK4 (GL9755)
- Replace WARN_ONCE with dev_warn_once for scatterlist offsets
- Extend check of scatterlist size alignment with SD_IO_RW_EXTENDED
* tag 'mmc-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: increase 1.8V regulator wait
mmc: meson-gx: also check SD_IO_RW_EXTENDED for scatterlist size alignment
mmc: meson-gx: make replace WARN_ONCE with dev_warn_once about scatterlist offset alignment
Linus Torvalds [Fri, 21 May 2021 16:24:45 +0000 (06:24 -1000)]
Merge tag 'devicetree-fixes-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Another batch of removing unneeded type references in schemas
- Fix some out of date filename references
- Convert renesas,drif schema to use DT graph schema
* tag 'devicetree-fixes-for-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: More removals of type references on common properties
dt-bindings: media: renesas,drif: Use graph schema
leds: Fix reference file name of documentation
dt-bindings: phy: cadence-torrent: update reference file of docs
Linus Torvalds [Fri, 21 May 2021 16:12:52 +0000 (06:12 -1000)]
Merge branch 'for-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull siginfo fix from Eric Biederman:
"During the merge window an issue with si_perf and the siginfo ABI came
up. The alpha and sparc siginfo structure layout had changed with the
addition of SIGTRAP TRAP_PERF and the new field si_perf.
The reason only alpha and sparc were affected is that they are the
only architectures that use si_trapno.
Looking deeper it was discovered that si_trapno is used for only a few
select signals on alpha and sparc, and that none of the other
_sigfault fields past si_addr are used at all. Which means technically
no regression on alpha and sparc.
While the alignment concerns might be dismissed the abuse of si_errno
by SIGTRAP TRAP_PERF does have the potential to cause regressions in
existing userspace.
While we still have time before userspace starts using and depending
on the new definition siginfo for SIGTRAP TRAP_PERF this set of
changes cleans up siginfo_t.
- The si_trapno field is demoted from magic alpha and sparc status
and made an ordinary union member of the _sigfault member of
siginfo_t. Without moving it of course.
- si_perf is replaced with si_perf_data and si_perf_type ending the
abuse of si_errno.
- Unnecessary additions to signalfd_siginfo are removed"
* 'for-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signalfd: Remove SIL_PERF_EVENT fields from signalfd_siginfo
signal: Deliver all of the siginfo perf data in _perf
signal: Factor force_sig_perf out of perf_sigtrap
signal: Implement SIL_FAULT_TRAPNO
siginfo: Move si_trapno inside the union inside _si_fault
Linus Torvalds [Fri, 21 May 2021 16:09:17 +0000 (06:09 -1000)]
Merge tag 'modules-for-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module fix from Jessica Yu:
"When CONFIG_MODULE_UNLOAD=n, module exit sections get sorted into the
init region of the module in order to satisfy the requirements of
jump_labels and static_calls.
Previously, the exit section check was done in module_init_section(),
but the solution there is not completely arch-indepedent as ARM is a
special case and supplies its own module_init_section() function.
Instead of pushing this logic further to the arch-specific code,
switch to an arch-independent solution to check for module exit
sections in the core module loader code in layout_sections() instead"
* tag 'modules-for-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: check for exit sections in layout_sections() instead of module_init_section()
Jan Beulich [Tue, 18 May 2021 16:14:07 +0000 (18:14 +0200)]
xen-pciback: reconfigure also from backend watch handler
When multiple PCI devices get assigned to a guest right at boot, libxl
incrementally populates the backend tree. The writes for the first of
the devices trigger the backend watch. In turn xen_pcibk_setup_backend()
will set the XenBus state to Initialised, at which point no further
reconfigures would happen unless a device got hotplugged. Arrange for
reconfigure to also get triggered from the backend watch handler.
Jan Beulich [Tue, 18 May 2021 16:13:42 +0000 (18:13 +0200)]
xen-pciback: redo VF placement in the virtual topology
The commit referenced below was incomplete: It merely affected what
would get written to the vdev-<N> xenstore node. The guest would still
find the function at the original function number as long as
__xen_pcibk_get_pci_dev() wouldn't be in sync. The same goes for AER wrt
__xen_pcibk_get_pcifront_dev().
Undo overriding the function to zero and instead make sure that VFs at
function zero remain alone in their slot. This has the added benefit of
improving overall capacity, considering that there's only a total of 32
slots available right now (PCI segment and bus can both only ever be
zero at present).
Fixes: 8a5248fe10b1 ("xen PV passthru: assign SR-IOV virtual functions to separate virtual slots") Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/8def783b-404c-3452-196d-3f3fd4d72c9e@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
Jan Beulich [Thu, 20 May 2021 11:42:42 +0000 (13:42 +0200)]
x86/Xen: swap NX determination and GDT setup on BSP
xen_setup_gdt(), via xen_load_gdt_boot(), wants to adjust page tables.
For this to work when NX is not available, x86_configure_nx() needs to
be called first.
[jgross] Note that this is a revert of 36104cb9012a82e73 ("x86/xen:
Delay get_cpu_cap until stack canary is established"), which is possible
now that we no longer support running as PV guest in 32-bit mode.
Cc: <stable.vger.kernel.org> # 5.9 Fixes: 36104cb9012a82e73 ("x86/xen: Delay get_cpu_cap until stack canary is established") Reported-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/12a866b0-9e89-59f7-ebeb-a2a6cec0987a@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
Linus Torvalds [Fri, 21 May 2021 06:15:43 +0000 (20:15 -1000)]
Merge tag 'drm-fixes-2021-05-21-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Usual collection, mostly amdgpu and some i915 regression fixes. I
nearly managed to hose my build/sign machine this week, but I
recovered it just in time, and I even got clang12 built.
dma-buf:
- WARN fix
amdgpu:
- Fix downscaling ratio on DCN3.x
- Fix for non-4K pages
- PCO/RV compute hang fix
- Dongle fix
- Aldebaran codec query support
- Refcount leak fix
- Use after free fix
- Navi12 golden settings updates
- GPU reset fixes
radeon:
- Fix for imported BO handling
i915:
- Pin the L-shape quirked object as unshrinkable to fix crashes
- Disable HiZ Raw Stall Optimization on broken gen7 to fix glitches,
gfx corruption
- GVT: Move mdev attribute groups into kvmgt module to fix kconfig
deps issue
exynos:
- Correct kerneldoc of fimd_shadow_protect_win function
- Drop redundant error messages"
* tag 'drm-fixes-2021-05-21-1' of git://anongit.freedesktop.org/drm/drm:
dma-buf: fix unintended pin/unpin warnings
drm/amdgpu: stop touching sched.ready in the backend
drm/amd/amdgpu: fix a potential deadlock in gpu reset
drm/amdgpu: update sdma golden setting for Navi12
drm/amdgpu: update gc golden setting for Navi12
drm/amdgpu: Fix a use-after-free
drm/amdgpu: add video_codecs query support for aldebaran
drm/amd/amdgpu: fix refcount leak
drm/amd/display: Disconnect non-DP with no EDID
drm/amdgpu: disable 3DCGCG on picasso/raven1 to avoid compute hang
drm/amdgpu: Fix GPU TLB update error when PAGE_SIZE > AMDGPU_PAGE_SIZE
drm/radeon: use the dummy page for GART if needed
drm/amd/display: Use the correct max downscaling value for DCN3.x family
drm/i915/gt: Disable HiZ Raw Stall Optimization on broken gen7
drm/i915/gem: Pin the L-shape quirked object as unshrinkable
drm/exynos/decon5433: Remove redundant error printing in exynos5433_decon_probe()
drm/exynos: Remove redundant error printing in exynos_dsi_probe()
drm/exynos: correct exynos_drm_fimd kerneldoc
drm/i915/gvt: Move mdev attribute groups into kvmgt module
Dave Airlie [Fri, 21 May 2021 03:41:41 +0000 (13:41 +1000)]
Merge tag 'drm-intel-fixes-2021-05-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.13-rc3:
- Pin the L-shape quirked object as unshrinkable to fix crashes
- Disable HiZ Raw Stall Optimization on broken gen7 to fix glitches, gfx corruption
- GVT: Move mdev attribute groups into kvmgt module to fix kconfig deps issue
Linus Torvalds [Fri, 21 May 2021 00:46:26 +0000 (14:46 -1000)]
Merge tag 'arm-soc-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Only a small number of fixes so far, including some that I had applied
during the merge window, so this is based on the original merge of the
other branches.
- The largest change is a fix for a reference counting bug in the AMD
TEE driver.
- Neil Armstrong now co-maintains Amlogic SoC support
- Two build warning fixes for renesas device tree files
- A sign expansion bug for optee
- A DT binding fix for a mismerge"
* tag 'arm-soc-fixes-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: npcm: wpcm450: select interrupt controller driver
MAINTAINERS: ARM/Amlogic SoCs: add Neil as primary maintainer
tee: amdtee: unload TA only when its refcount becomes 0
dt-bindings: nvmem: mediatek: remove duplicate mt8192 line
firmware: arm_scmi: Remove duplicate declaration of struct scmi_protocol_handle
firmware: arm_scpi: Prevent the ternary sign expansion bug
arm64: dts: renesas: Add port@0 node for all CSI-2 nodes to dtsi
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Fix CSI40 ports
Linus Torvalds [Fri, 21 May 2021 00:43:33 +0000 (14:43 -1000)]
Merge branch 'urgent.2021.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull kcsan fix from Paul McKenney:
"Fix for a regression introduced in this merge window by commit e36299efe7d7 ("kcsan, debugfs: Move debugfs file creation out of early
init").
The regression is not easy to trigger, requiring a KCSAN build using
clang with CONFIG_LTO_CLANG=y. The fix is to simply make the
kcsan_debugfs_init() function's type initcall-compatible. This has
been posted to the relevant mailing lists:"
* 'urgent.2021.05.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan: Fix debugfs initcall return type
Linus Torvalds [Fri, 21 May 2021 00:36:21 +0000 (14:36 -1000)]
Merge tag 'for-5.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix a couple DM snapshot target crashes exposed by user-error.
- Fix DM integrity target to not use discard optimization, introduced
during 5.13 merge, when recalulating.
- Fix some sparse warnings in DM integrity target.
* tag 'for-5.13/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm integrity: fix sparse warnings
dm integrity: revert to not using discard filler when recalulating
dm snapshot: fix crash with transient storage and zero chunk size
dm snapshot: fix a crash when an origin has no snapshots
When mod_delayed_work is called to modify the delay of pending work,
it might return false and queue a new work when pending work is
already scheduled or when try to grab pending work failed.
So, Increase the reference count when new work is scheduled to
avoid use-after-free.
Signed-off-by: Rohith Surabattula <rohiths@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Linus Torvalds [Thu, 20 May 2021 16:44:04 +0000 (06:44 -1000)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"A mixture of small bug fixes, most for longer standing problems:
- NULL pointer crash in siw
- Various error unwind bugs in siw, rxe, cm
- User triggerable errors in uverbs
- Minor bugs in mlx5 and rxe drivers"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/uverbs: Fix a NULL vs IS_ERR() bug
RDMA/mlx5: Fix query DCT via DEVX
RDMA/core: Don't access cm_id after its destruction
RDMA/rxe: Return CQE error if invalid lkey was supplied
RDMA/mlx5: Recover from fatal event in dual port mode
RDMA/mlx5: Verify that DM operation is reasonable
RDMA/rxe: Clear all QP fields if creation failed
RDMA/core: Prevent divide-by-zero error triggered by the user
RDMA/siw: Release xarray entry
RDMA/siw: Properly check send and receive CQ pointers
Linus Torvalds [Thu, 20 May 2021 16:42:21 +0000 (06:42 -1000)]
Merge tag 'sound-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"All small device-specific fixes here: a series of FireWire audio
fixes, UAF and other fixes in USB-audio and co spotted by fuzzer,
and a few HD-audio quirks as usual"
* tag 'sound-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: line6: Fix racy initialization of LINE6 MIDI
ALSA: dice: fix stream format for TC Electronic Konnekt Live at high sampling transfer frequency
ALSA: dice: disable double_pcm_frames mode for M-Audio Profire 610, 2626 and Avid M-Box 3 Pro
ALSA: intel8x0: Don't update period unless prepared
ALSA: hda/realtek: Add some CLOVE SSIDs of ALC293
ALSA: firewire-lib: fix amdtp_packet tracepoints event for packet_index field
ALSA: firewire-lib: fix calculation for size of IR context payload
ALSA: firewire-lib: fix check for the size of isochronous packet payload
ALSA: bebob/oxfw: fix Kconfig entry for Mackie d.2 Pro
ALSA: dice: fix stream format at middle sampling rate for Alesis iO 26
ALSA: hda/realtek: Add fixup for HP Spectre x360 15-df0xxx
ALSA: usb-audio: Fix potential out-of-bounce access in MIDI EP parser
ALSA: usb-audio: Validate MS endpoint descriptors
ALSA: hda: fixup headset for ASUS GU502 laptop
ALSA: hda/realtek: reset eapd coeff to default value for alc287
Linus Torvalds [Thu, 20 May 2021 16:40:20 +0000 (06:40 -1000)]
Merge tag 'platform-drivers-x86-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Assorted pdx86 bug-fixes and model-specific quirks for 5.13"
* tag 'platform-drivers-x86-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the Chuwi Hi10 Pro (CWI529) tablet
platform/x86: touchscreen_dmi: Add info for the Mediacom Winpad 7.0 W700 tablet
platform/x86: intel_punit_ipc: Append MODULE_DEVICE_TABLE for ACPI
platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios
platform/x86: hp-wireless: add AMD's hardware id to the supported list
platform/x86: intel_int0002_vgpio: Only call enable_irq_wake() when using s2idle
platform/x86: gigabyte-wmi: add support for B550 Aorus Elite
platform/x86: gigabyte-wmi: add support for X570 UD
platform/x86: gigabyte-wmi: streamline dmi matching
platform/mellanox: mlxbf-tmfifo: Fix a memory barrier issue
platform/surface: dtx: Fix poll function
platform/surface: aggregator: Add platform-drivers-x86 list to MAINTAINERS entry
platform/surface: aggregator: avoid clang -Wconstant-conversion warning
platform/surface: aggregator: Do not mark interrupt as shared
platform/x86: hp_accel: Avoid invoking _INI to speed up resume
platform/x86: ideapad-laptop: fix method name typo
platform/x86: ideapad-laptop: fix a NULL pointer dereference
Linus Torvalds [Thu, 20 May 2021 16:31:52 +0000 (06:31 -1000)]
Merge tag 'char-misc-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here is a big set of char/misc/other driver fixes for 5.13-rc3.
The majority here is the fallout of the umn.edu re-review of all prior
submissions. That resulted in a bunch of reverts along with the
"correct" changes made, such that there is no regression of any of the
potential fixes that were made by those individuals. I would like to
thank the over 80 different developers who helped with the review and
fixes for this mess.
Other than that, there's a few habanna driver fixes for reported
issues, and some dyndbg fixes for reported problems.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (82 commits)
misc: eeprom: at24: check suspend status before disable regulator
uio_hv_generic: Fix another memory leak in error handling paths
uio_hv_generic: Fix a memory leak in error handling paths
uio/uio_pci_generic: fix return value changed in refactoring
Revert "Revert "ALSA: usx2y: Fix potential NULL pointer dereference""
dyndbg: drop uninformative vpr_info
dyndbg: avoid calling dyndbg_emit_prefix when it has no work
binder: Return EFAULT if we fail BINDER_ENABLE_ONEWAY_SPAM_DETECTION
cdrom: gdrom: initialize global variable at init time
brcmfmac: properly check for bus register errors
Revert "brcmfmac: add a check for the status of usb_register"
video: imsttfb: check for ioremap() failures
Revert "video: imsttfb: fix potential NULL pointer dereferences"
net: liquidio: Add missing null pointer checks
Revert "net: liquidio: fix a NULL pointer dereference"
media: gspca: properly check for errors in po1030_probe()
Revert "media: gspca: Check the return value of write_bridge for timeout"
media: gspca: mt9m111: Check write_bridge for timeout
Revert "media: gspca: mt9m111: Check write_bridge for timeout"
media: dvb: Add check on sp8870_readreg return
...
Linus Torvalds [Thu, 20 May 2021 16:20:15 +0000 (06:20 -1000)]
Merge tag 'quota_for_v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota fixes from Jan Kara:
"The most important part in the pull is disablement of the new syscall
quotactl_path() which was added in rc1.
The reason is some people at LWN discussion pointed out dirfd would be
useful for this path based syscall and Christian Brauner agreed.
Without dirfd it may be indeed problematic for containers. So let's
just disable the syscall for now when it doesn't have users yet so
that we have more time to mull over how to best specify the filesystem
we want to work on"
* tag 'quota_for_v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Disable quotactl_path syscall
quota: Use 'hlist_for_each_entry' to simplify code
Darrick J. Wong [Wed, 12 May 2021 23:43:10 +0000 (16:43 -0700)]
xfs: restore old ioctl definitions
These ioctl definitions in xfs_fs.h are part of the userspace ABI and
were mistakenly removed during the 5.13 merge window.
Fixes: 9fefd5db08ce ("xfs: convert to fileattr") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
Darrick J. Wong [Wed, 12 May 2021 23:41:13 +0000 (16:41 -0700)]
xfs: fix deadlock retry tracepoint arguments
sc->ip is the inode that's being scrubbed, which means that it's not set
for scrub types that don't involve inodes. If one of those scrubbers
(e.g. inode btrees) returns EDEADLOCK, we'll trip over the null pointer.
Fix that by reporting either the file being examined or the file that
was used to call scrub.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com>
Darrick J. Wong [Sun, 9 May 2021 23:22:55 +0000 (16:22 -0700)]
xfs: retry allocations when locality-based search fails
If a realtime allocation fails because we can't find a sufficiently
large free extent satisfying locality rules, relax the locality rules
and try again. This reduces the occurrence of short writes to realtime
files when the write size is large and the free space is fragmented.
This was originally discovered by running generic/186 with the realtime
reflink patchset and a 128k cow extent size hint, but the short write
symptoms can manifest with a 128k extent size hint and no reflink, so
apply the fix now.
Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com>