Daniel Scally [Thu, 5 May 2022 23:03:48 +0000 (01:03 +0200)]
media: uapi: Add IPU3 packed Y10 format
Some platforms with an Intel IPU3 have an IR sensor producing 10 bit
greyscale format data that is transmitted over a CSI-2 bus to a CIO2
device - this packs the data into 32 bytes per 25 pixels. Add an entry
to the uAPI header defining that format.
Signed-off-by: Daniel Scally <djrscally@gmail.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Bingbu Cao [Wed, 29 Dec 2021 03:15:15 +0000 (04:15 +0100)]
media: ov8856: apply digital gain by setting global gain control register
MWB gain register are used to set gain for each mwb channel mannually.
However, it will involve some artifacts if gain cannot be applied to
each channel synchronously. Enable global gain control to set digital
global gain instead of setting AWB gain separately to fix this issue.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yang Yingliang [Tue, 30 Mar 2021 13:04:46 +0000 (15:04 +0200)]
media: i2c: ov5648: fix wrong pointer passed to IS_ERR() and PTR_ERR()
IS_ERR() and PTR_ERR() use wrong pointer, it should be
sensor->dovdd, fix it.
Fixes: c6372971ea8d ("media: i2c: Add support for the OV5648 image sensor") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
media: i2c: video-i2c: Move defines to the top of the file
Currently, the defines in this driver are after some structs and
functions, it makes more sense to move them up to the top of the file,
so that the constants can be named together with other defines.
Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sakari Ailus [Tue, 26 Apr 2022 07:02:39 +0000 (09:02 +0200)]
media: Add CSI-2 bus configuration to frame descriptors
Add CSI-2 bus specific configuration to the frame descriptors. This allows
obtaining the virtual channel and data type information for each stream
the transmitter is sending.
Dongliang Mu [Fri, 22 Apr 2022 08:54:05 +0000 (10:54 +0200)]
media: ov7670: remove ov7670_power_off from ov7670_remove
In ov7670_probe, it always invokes ov7670_power_off() no matter
the execution is successful or failed. So we cannot invoke it
agiain in ov7670_remove().
Fix this by removing ov7670_power_off from ov7670_remove.
Fixes: 4b14b7073ba0 ("media: ov7670: control clock along with power") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There is firmware out there that uses "dongwoon,dw9807" compatible string
that never made it to upstream as-is. Add it to the driver to make it load
on such systems.
The chip also has an EEPROM part which is AT24 compatible (for reading
purposes) on a separate I²C address. Adding possible support for this in
the future is not affected by this change.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The imx412/imx577 sensor has a reset line that is active low not active
high. Currently the logic for this is inverted.
The right way to define the reset line is to declare it active low in the
DTS and invert the logic currently contained in the driver.
The DTS should represent the hardware does i.e. reset is active low.
So:
+ reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
not:
- reset-gpios = <&tlmm 78 GPIO_ACTIVE_HIGH>;
I was a bit reticent about changing this logic since I thought it might
negatively impact @intel.com users. Googling a bit though I believe this
sensor is used on "Keem Bay" which is clearly a DTS based system and is not
upstream yet.
Nicolas Dufresne [Tue, 26 Apr 2022 12:57:30 +0000 (14:57 +0200)]
media: h264: Avoid wrapping long_term_frame_idx
For long term references, frame_num is set to long_term_frame_idx which
does not require wrapping. This is fixed by observation, no directly
related issue have been found yet.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Nicolas Dufresne [Tue, 26 Apr 2022 12:57:28 +0000 (14:57 +0200)]
media: v4l2-mem2mem: Trace on implicit un-hold
If the timestamp of the src buffer differs from the timestamp of a held
dst buffer, the held buffer is implicitly removed and marked as done.
Add a trace to help debugging if someone hits that case.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Nicolas Dufresne [Tue, 26 Apr 2022 12:57:27 +0000 (14:57 +0200)]
media: doc: Document dual use of H.264 pic_num/frame_num
These two fields need documentation as they have dual meaning. It is also
confusing since pic_num is a derived value from frame_num, so this should
help application developers. If we ever need to make a V2 of this API, I
would suggest to remove pic_num entirely.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Reviewed-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 12 May 2022 02:19:50 +0000 (04:19 +0200)]
media: mediatek: vcodec: prevent kernel crash when rmmod mtk-vcodec-dec.ko
If the driver support subdev mode, the parameter "dev->pm.dev" will be
NULL in mtk_vcodec_dec_remove. Kernel will crash when try to rmmod
mtk-vcodec-dec.ko.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 12 May 2022 02:19:49 +0000 (04:19 +0200)]
media: mediatek: vcodec: support stateless VP9 decoding
Add support for VP9 decoding using the stateless API,
as supported by MT8192. And the drivers is lat and core architecture.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: George Sun <george.sun@mediatek.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 12 May 2022 02:19:48 +0000 (04:19 +0200)]
media: mediatek: vcodec: support stateless VP8 decoding
Add support for VP8 decoding using the stateless API,
as supported by MT8192.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 12 May 2022 02:19:47 +0000 (04:19 +0200)]
media: mediatek: vcodec: support stateless H.264 decoding for mt8192
Adds h264 lat and core architecture driver for mt8192,
and the decode mode is frame based for stateless decoder.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 12 May 2022 02:19:46 +0000 (04:19 +0200)]
media: mediatek: vcodec: Extract H264 common code
Mt8192 can use some of common code with mt8183. Moves them to
a new file in order to reuse.
[hverkuil: replaced memcpy_toio by memcpy, was left over from a prev version]
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 12 May 2022 02:19:45 +0000 (04:19 +0200)]
media: mediatek: vcodec: record capture queue format type
The capture queue format type may be differ depending on platform: for
stateless decoder drivers, we need to calculate the capture buffer size
according to the capture queue format type in SCP.
As a preparation for introducing drivers for stateless decoding, save the
current capture queue type on a per vcodec context basis.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 12 May 2022 02:19:44 +0000 (04:19 +0200)]
media: mediatek: vcodec: Fix v4l2-compliance fail
Need to use default pic info when get pic info fail.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Steve Cho <stevecho@chromium.org> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 12 May 2022 02:19:42 +0000 (04:19 +0200)]
media: mediatek: vcodec: Add format to support MT21C
Needs to use mediatek compressed mode for mt8192 decoder.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 12 May 2022 02:19:41 +0000 (04:19 +0200)]
media: mediatek: vcodec: Getting supported decoder format types
Getting supported output and capture queue format types according
to decoder capability.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 12 May 2022 02:19:40 +0000 (04:19 +0200)]
media: mediatek: vcodec: Refactor supported vdec formats and framesizes
Supported output and capture format types for mt8192 are different
with mt8183. Redefine parameters to store them.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 12 May 2022 02:19:39 +0000 (04:19 +0200)]
media: mediatek: vcodec: Refactor get and put capture buffer flow
For lat and core decode in parallel, need to get capture buffer
when core start to decode and put capture buffer to display
list when core decode done.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 12 May 2022 02:19:38 +0000 (04:19 +0200)]
media: mediatek: vcodec: set each plane bytesused in buf prepare
call vb2_set_plane_payload to set each plane bytesused in buf prepare,
need not to set independently for stateless and statefull architectures.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 12 May 2022 02:19:37 +0000 (04:19 +0200)]
media: mediatek: vcodec: Read max resolution from dec_capability
Supported max resolution for different platforms are not the same: 2K
or 4K, getting it according to dec_capability.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Tzung-Bi Shih<tzungbi@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 12 May 2022 02:19:36 +0000 (04:19 +0200)]
media: mediatek: vcodec: get capture queue buffer size from scp
Different capture buffer format has different buffer size, need to get
real buffer size according to buffer type from scp.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yunfei Dong [Thu, 12 May 2022 02:19:35 +0000 (04:19 +0200)]
media: mediatek: vcodec: Using firmware type to separate different firmware architecture
MT8173 platform use vpu firmware, mt8183/mt8192 will use scp
firmware instead, using chip name is not reasonable to separate
different firmware architecture. Using firmware type is much better.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Tzung-Bi Shih<tzungbi@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Lock, power and clock are highly coupled operations. Adds vdec
enable/disable hardware helpers and uses them.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: Tzung-Bi Shih<tzungbi@google.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
media: mediatek: vcodec: Fix v4l2 compliance decoder cmd test fail
Will return -EINVAL using standard framework api when test stateless
decoder with cmd VIDIOC_(TRY)DECODER_CMD. Disable them to adjust v4l2
compliance test for user driver(GStreamer/Chrome) won't use decoder cmd.
Fixes: 30a1c0ef0478 ("media: mtk-vcodec: vdec: support stateless API") Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans Verkuil [Fri, 6 May 2022 12:46:46 +0000 (14:46 +0200)]
media: cec-adap.c: reconfigure if the PA changes during configuration
If the physical address changes (i.e. becomes invalid, then valid again)
while the adapter is still claiming free logical addresses, then trigger
a reconfiguration since any claimed LAs may now be stale.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans Verkuil [Fri, 6 May 2022 07:43:25 +0000 (09:43 +0200)]
media: cec-adap.c: fix is_configuring state
If an adapter is trying to claim a free logical address then it is
in the 'is_configuring' state. If during that process the cable is
disconnected (HPD goes low, which in turn invalidates the physical
address), then cec_adap_unconfigure() is called, and that set the
is_configuring boolean to false, even though the thread that's
trying to claim an LA is still running.
Don't touch the is_configuring bool in cec_adap_unconfigure(), it
will eventually be cleared by the thread. By making that change
the cec_config_log_addr() function also had to change: it was
aborting if is_configuring became false (since that is what
cec_adap_unconfigure() did), but that no longer works. Instead
check if the physical address is invalid. That is a much
more appropriate check anyway.
This fixes a bug where the the adapter could be disabled even
though the device was still configuring. This could cause POLL
transmits to time out.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans Verkuil [Fri, 6 May 2022 07:39:22 +0000 (09:39 +0200)]
media: cec-adap.c: stop trying LAs on CEC_TX_STATUS_TIMEOUT
If, while trying to claim a free logical address, a POLL message
times out, then abort this process. A CEC_TX_STATUS_TIMEOUT
should be handled the same as a CEC_TX_STATUS_ABORTED.
This avoids a situation where transmits time out due to a
driver or hardware bug and it takes ages before the attempt
to find available free logical addresses finishes.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans Verkuil [Fri, 6 May 2022 07:25:55 +0000 (09:25 +0200)]
media: cec-adap.c: don't unconfigure if already unconfigured
The __cec_s_log_addrs() function can configure or unconfigure the
adapter. The ioctl handler in cec-api.c will prevent it from being
called to configure the adapter if it was already configured (or in
the process of configuring). But it can still be called to unconfigure
an already unconfigured adapter, and it didn't check for that.
This can cause cec_activate_cnt_dec() to be called too often, causing
a WARN_ON.
Instead first check if adap->log_addrs.num_log_addrs == 0 and return
since in that case the adapter is already unconfigured.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans Verkuil [Tue, 10 May 2022 11:59:48 +0000 (13:59 +0200)]
media: cec-pin.c: don't zero work_pin_num_events in adap_enable
It's OK to keep the pending pin events when disabling or
enabling the 'adapter'. Zeroing this can cause a race condition
if this happens when the pin kthread is handling a pin event
and calls atomic_dec later, causing work_pin_num_events to become
negative.
Just leave pending events in the queue, they'll be read eventually.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans Verkuil [Fri, 6 May 2022 07:15:40 +0000 (09:15 +0200)]
media: cec-pin.c: disabling the adapter cannot call kthread_stop
When the adap_enable callback is called the adap->lock is held.
When disabling the adapter it attempts to stop the kthread that
deals with receiving and transmitting messages. However, kthread_stop
waits for the thread to stop, so all that time adap->lock is held.
Unfortunately, the kernel thread itself can call functions that take
that same lock, so a deadlock can occur.
Change the logic to keep the kernel thread running and instead when
disabling the adapter, just set the pin to high, go to idle and then
to state OFF and disable the interrupt. Only stop the kernel thread
when the adapter is deleted.
This way disabling the adapter will not wait for anything and the
deadlock is avoided.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tetsuo Handa [Mon, 2 May 2022 03:49:04 +0000 (05:49 +0200)]
media: imon: reorganize serialization
Since usb_register_dev() from imon_init_display() from imon_probe() holds
minor_rwsem while display_open() which holds driver_lock and ictx->lock is
called with minor_rwsem held from usb_open(), holding driver_lock or
ictx->lock when calling usb_register_dev() causes circular locking
dependency problem.
Since usb_deregister_dev() from imon_disconnect() holds minor_rwsem while
display_open() which holds driver_lock is called with minor_rwsem held,
holding driver_lock when calling usb_deregister_dev() also causes circular
locking dependency problem.
Sean Young explained that the problem is there are imon devices which have
two usb interfaces, even though it is one device. The probe and disconnect
function of both usb interfaces can run concurrently.
Alan Stern responded that the driver and USB cores guarantee that when an
interface is probed, both the interface and its USB device are locked.
Ditto for when the disconnect callback gets run. So concurrent probing/
disconnection of multiple interfaces on the same device is not possible.
Therefore, we don't need locks for handling race between imon_probe() and
imon_disconnect(). But we still need to handle race between display_open()
/vfd_write()/lcd_write()/display_close() and imon_disconnect(), for
disconnect event can happen while file descriptors are in use.
Since "struct file"->private_data is set by display_open(), vfd_write()/
lcd_write()/display_close() can assume that "struct file"->private_data
is not NULL even after usb_set_intfdata(interface, NULL) was called.
Replace insufficiently held driver_lock with refcount_t based management.
Add a boolean flag for recording whether imon_disconnect() was already
called. Use RCU for accessing this boolean flag and refcount_t.
Since the boolean flag for imon_disconnect() is shared, disconnect event
on either intf0 or intf1 affects both interfaces. But I assume that this
change does not matter, for usually disconnect event would not happen
while interfaces are in use.
Link: https://syzkaller.appspot.com/bug?extid=c558267ad910fc494497 Reported-by: syzbot <syzbot+c558267ad910fc494497@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot <syzbot+c558267ad910fc494497@syzkaller.appspotmail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Oliver Neukum [Thu, 28 Apr 2022 13:34:55 +0000 (15:34 +0200)]
media: imon: drop references only after device is no longer used
The point of using get/put_device() is to keep references
for as long as the device may be in use. That means dropping
them must be the penultimate action right before freeing the memory.
Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
media: hantro: HEVC: unconditionnaly set pps_{cb/cr}_qp_offset values
Always set pps_cb_qp_offset and pps_cr_qp_offset values in Hantro/G2
register whatever is V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT
flag value.
The vendor code does the same to set these values.
This fixes conformance test CAINIT_G_SHARP_3.
Fluster HEVC score is increase by one with this patch.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
PoC shall be int the range of -2^31 to 2^31 -1
(HEVC spec section 8.3.1 Decoding process for picture order count).
The current way to know if an entry in reference picture array is free
is to test if PoC = UNUSED_REF. Since UNUSED_REF is defined as '-1' that
could lead to decode issue if one PoC also equal '-1'.
PoC with value = '-1' exists in conformance test SLIST_B_Sony_9.
Change the way unused entries are managed in reference pictures array to
avoid using PoC to detect then.
This patch doesn't change fluster HEVC score.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
media: hantro: HEVC: Fix tile info buffer value computation
Use pps->column_width_minus1[j] + 1 as value for the tile info buffer
instead of pps->column_width_minus1[j + 1].
The patch fixes DBLK_E_VIXS_2, DBLK_F_VIXS_2, DBLK_G_VIXS_2,
SAO_B_MediaTek_5, TILES_A_Cisco_2 and TILES_B_Cisco_1 tests in fluster.
Fixes: 8da9da7889ff ("media: hantro: Introduce G2/HEVC decoder") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hantro decoder doesn't take care of the requested and aligned size
of the capture buffer.
Stop using the bitstream width/height and use capture frame size
stored in the context to get the correct values.
hantro_hevc_chroma_offset() and hantro_hevc_motion_vectors_offset()
are only used in hantro_g2_hevc_dec.c so take the opportunity
to move them here.
fluster HEVC score goes up from 77 to 85 successful tests (over 147)
with this patch.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
media: hantro: Use post processor scaling capacities
Hantro G2 post processor is able to down scale decoded frames
by a factor of 2, 4 or 8.
Add enum_framesizes() ops to postproc_ops structure to enumerate the
possible output sizes for a given input resolution.
For G2 post-processor use fsize->index (from 0 to 3) as power of 2
divisor. As described in v4l2 documentation return -EINVAL when scaling
down isn't possible.
fluster scores:
77/147 for HEVC
143/303 for VP9
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Ming Qian [Mon, 9 May 2022 07:52:25 +0000 (09:52 +0200)]
media: amphion: G/S_PARM only for encoder's output queue
G/S_PARM doesn't make sense for the capture queue of a stateful encoder,
unless V4L2_FMT_FLAG_ENC_CAP_FRAME_INTERVAL is set to reserve hardware
resources.
Otherwise it will fail the v4l2-compliance
Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Eugen Hristev [Tue, 3 May 2022 08:44:18 +0000 (10:44 +0200)]
media: atmel: atmel-isc-base: use mutex to lock awb workq from streaming
The AWB workqueue runs in a kernel thread and needs to be synchronized
w.r.t. the streaming status.
It is possible that streaming is stopped while the AWB workq is running.
In this case it is likely that the check for vb2_start_streaming_called is
done at one point in time, but the AWB computations are done later,
including a call to isc_update_profile, which requires streaming to be
started.
Thus , isc_update_profile will fail if during this operation sequence the
streaming was stopped.
To solve this issue, a mutex is added, that will serialize the awb work and
streaming stopping, with the mention that either streaming is stopped
completely including termination of the last frame is done, and after that
the AWB work can check stream status and stop; either first AWB work is
completed and after that the streaming can stop correctly.
The awb spin lock cannot be used since this spinlock is taken in the same
context and using it in the stop streaming will result in a recursion BUG.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Eugen Hristev [Tue, 3 May 2022 08:44:17 +0000 (10:44 +0200)]
media: atmel: atmel-sama5d2-isc: fix wrong mask in YUYV format check
While this does not happen in production, this check should be done
versus the mask, as checking with the YCYC value may not include
some bits that may be set.
It is correct and safe to check the whole mask.
Eugen Hristev [Tue, 3 May 2022 08:44:14 +0000 (10:44 +0200)]
media: atmel: atmel-isc-base: use streaming status when queueing buffers
During experiments with libcamera, it looks like vb2_is_streaming returns
true before our start streaming is called.
Order of operations is streamon -> queue -> start_streaming
ISC would have started the DMA immediately when a buffer is being added
to the vbqueue if the queue is streaming.
It is more safe to start the DMA after the start streaming of the driver is
called.
Thus, even if vb2queue is streaming, add the buffer to the dma queue of the
driver instead of actually starting the DMA process, if the start streaming
has not been called yet.
Tho achieve this, we have to use vb2_start_streaming_called instead of
vb2_is_streaming.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Michael Rodin [Tue, 23 Nov 2021 11:50:36 +0000 (12:50 +0100)]
media: vsp1: Fix offset calculation for plane cropping
The vertical subsampling factor is currently not considered in the
offset calculation for plane cropping done in rpf_configure_partition.
This causes a distortion (shift of the color plane) when formats with
the vsub factor larger than 1 are used (e.g. NV12, see
vsp1_video_formats in vsp1_pipe.c). This commit considers vsub factor
for all planes except plane 0 (luminance).
Drop generalization of the offset calculation to reduce the binary size.
Laurent Pinchart [Fri, 18 Mar 2022 18:01:03 +0000 (19:01 +0100)]
media: vsp1: Don't open-code vb2_fop_release()
Use the vb2_fop_release() helper to replace the open-coded version. The
video->lock is assigned to the queue lock, used by vb2_fop_release(), so
the only functional difference is that v4l2_fh_release() is now called
before vsp1_device_put(). This should be harmless.
Laurent Pinchart [Fri, 18 Mar 2022 17:44:35 +0000 (18:44 +0100)]
media: videobuf2-v4l2: Expose vb2_queue_is_busy() to drivers
vb2 queue ownership is managed by the ioctl handler helpers
(vb2_ioctl_*). There are however use cases where drivers can benefit
from checking queue ownership, for instance when open-coding an ioctl
handler that needs to perform additional checks before calling the
corresponding vb2 operation.
Expose the vb2_queue_is_busy() function in the videobuf2-v4l2.h header,
and change its first argument to a struct vb2_queue pointer as the
function name implies it operates on a queue, not a video_device.
media: atomisp: don't pass a pointer to a local variable
As warned by gcc 12.1:
drivers/staging/media/atomisp/pci/runtime/rmgr/src/rmgr_vbuf.c: In function 'ia_css_rmgr_acq_vbuf':
drivers/staging/media/atomisp/pci/runtime/rmgr/src/rmgr_vbuf.c:275:33: error: storing the address of local variable 'h' in '*handle' [-Werror=dangling-pointer=]
275 | *handle = &h;
| ~~~~~~~~^~~~
drivers/staging/media/atomisp/pci/runtime/rmgr/src/rmgr_vbuf.c:257:40: note: 'h' declared here
257 | struct ia_css_rmgr_vbuf_handle h;
| ^
drivers/staging/media/atomisp/pci/runtime/rmgr/src/rmgr_vbuf.c:257:40: note: 'handle' declared here
cc1: all warnings being treated as errors
The logic uses a temporary struct to update the handler, but,
instead of copying the value to the pointer sent by the caller, it
replaces it with the content with a local variable. That's wrong, and
may lead the caller to use a weird value.
Tom Rix [Sat, 12 Mar 2022 17:30:49 +0000 (18:30 +0100)]
media: stkwebcam: move stk_camera_read_reg() scratch buffer to struct stk_camera
In stk_camera_read_reg() a single byte buffer is alloc-ed and
freed on every function call. Since the size is known,
move the buffer to the struct stk_camera where it will be alloc-ed
and freed once.
Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Let VIDIOC_ENUM_FRAMEINTERVALS return -EINVAL if userspace queries
frame intervals for frame sizes unsupported by the encoder. Fixes the
following v4l2-compliance failure:
fail: v4l2-test-formats.cpp(123): found frame intervals for invalid size 47x16
fail: v4l2-test-formats.cpp(282): node->codec_mask & STATEFUL_ENCODER
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL
[hverkuil: drop incorrect 'For decoder devices, return -ENOTTY.' in the commit log]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Document the RK3328 compatible for rockchip-vdec. The driver shares
the same base functionality as the RK3399 hardware so make sure that
the RK3399 compatible is also included in the device tree.
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
I tried to debug streaming in libcamera, where I stumbled upon this.
I asked around on IRC where I was told that this statement in the
documentation is wrong, so I'm submitting a removal.
media: amphion: no need to check return value of debugfs_create functions
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Ming Qian [Fri, 22 Apr 2022 01:36:21 +0000 (03:36 +0200)]
media: amphion: free ctrl handler if error is set and return error
The typical behavior is to add all controls, then at the end check if
hdl->error was set, and if so, v4l2_ctrl_handler_free is called and
the error is returned.
Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
projects / kernel.git / log