A significant number of xfstests can cause ext4 to log one or more
warning messages when they are run on a test file system where the
inline_data feature has been enabled. An example:
"EXT4-fs warning (device vdc): ext4_dirblock_csum_set:425: inode
#16385: comm fsstress: No space for directory leaf checksum. Please
run e2fsck -D."
The xfstests include: ext4/057, 058, and 307; generic/013, 051, 068,
070, 076, 078, 083, 232, 269, 270, 390, 461, 475, 476, 482, 579, 585,
589, 626, 631, and 650.
In this situation, the warning message indicates a bug in the code that
performs the RENAME_WHITEOUT operation on a directory entry that has
been stored inline. It doesn't detect that the directory is stored
inline, and incorrectly attempts to compute a dirent block checksum on
the whiteout inode when creating it. This attempt fails as a result
of the integrity checking in get_dirent_tail (usually due to a failure
to match the EXT4_FT_DIR_CSUM magic cookie), and the warning message
is then emitted.
Fix this by simply collecting the inlined data state at the time the
search for the source directory entry is performed. Existing code
handles the rest, and this is sufficient to eliminate all spurious
warning messages produced by the tests above. Go one step further
and do the same in the code that resets the source directory entry in
the event of failure. The inlined state should be present in the
"old" struct, but given the possibility of a race there's no harm
in taking a conservative approach and getting that information again
since the directory entry is being reread anyway.
Fixes: 7ef4b1da17dd ("ext4: find old entry again if failed to rename whiteout") Cc: stable@kernel.org Signed-off-by: Eric Whitney <enwlinux@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230210173244.679890-1-enwlinux@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove call_usermodehelper starting /etc/acpi/events/RadioPower.sh that
is not available. This script is not part of the kernel and it is not
officially available on the www. The result is that this lines are just
dead code.
Remove function _rtl92e_dm_check_ac_dc_power calling a script
/etc/acpi/wireless-rtl-ac-dc-power.sh that is not available. This script
is not part of the kernel and it is not available on the www. The result
is that this function is just dead code.
The commit 778ae812faa1 ("rtc: sun6i: Make external 32k oscillator
optional") loosened the requirement of the clocks property, making it
optional. However, the binding still required it to be present.
usb_kill_urb warranties that all the handlers are finished when it
returns, but does not protect against threads that might be handling
asynchronously the urb.
For UVC, the function uvc_ctrl_status_event_async() takes care of
control changes asynchronously.
If the code is executed in the following order:
CPU 0 CPU 1
===== =====
uvc_status_complete()
uvc_status_stop()
uvc_ctrl_status_event_work()
uvc_status_start() -> FAIL
Then uvc_status_start will keep failing and this error will be shown:
<4>[ 5.540139] URB 0000000000000000 submitted while active
drivers/usb/core/urb.c:378 usb_submit_urb+0x4c3/0x528
Let's improve the current situation, by not re-submiting the urb if
we are stopping the status event. Also process the queued work
(if any) during stop.
CPU 0 CPU 1
===== =====
uvc_status_complete()
uvc_status_stop()
uvc_status_start()
uvc_ctrl_status_event_work() -> FAIL
Hopefully, with the usb layer protection this should be enough to cover
all the cases.
Cc: stable@vger.kernel.org Fixes: 7128d5bfe465 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives") Reviewed-by: Yunke Cao <yunkec@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we backport dadd0dcaa67d ("net/ulp: prevent ULP without clone op from
entering the LISTEN status"), we have accidentally backported a part of 79f89118538e ("net: Return errno in sk->sk_prot->get_port().") and removed
err = -EADDRINUSE in inet_csk_listen_start().
Thus, listen() no longer returns -EADDRINUSE even if ->get_port() failed
as reported in [0].
We set -EADDRINUSE to err just before ->get_port() to fix the regression.
The receive path may take the socket right before hci_sock_release(),
but it may enqueue the packets to the socket queues after the call to
skb_queue_purge(), therefore the socket can be destroyed without clear
its queues completely.
Moving these skb_queue_purge() to the hci_sock_destruct() will fix this
issue, because nothing is referencing the socket at this point.
The implementation of 'current' on x86 is very intentionally special: it
is a very common thing to look up, and it uses 'this_cpu_read_stable()'
to get the current thread pointer efficiently from per-cpu storage.
And the keyword in there is 'stable': the current thread pointer never
changes as far as a single thread is concerned. Even if when a thread
is preempted, or moved to another CPU, or even across an explicit call
'schedule()' that thread will still have the same value for 'current'.
It is, after all, the kernel base pointer to thread-local storage.
That's why it's stable to begin with, but it's also why it's important
enough that we have that special 'this_cpu_read_stable()' access for it.
So this is all done very intentionally to allow the compiler to treat
'current' as a value that never visibly changes, so that the compiler
can do CSE and combine multiple different 'current' accesses into one.
However, there is obviously one very special situation when the
currently running thread does actually change: inside the scheduler
itself.
So the scheduler code paths are special, and do not have a 'current'
thread at all. Instead there are _two_ threads: the previous and the
next thread - typically called 'prev' and 'next' (or prev_p/next_p)
internally.
So this is all actually quite straightforward and simple, and not all
that complicated.
Except for when you then have special code that is run in scheduler
context, that code then has to be aware that 'current' isn't really a
valid thing. Did you mean 'prev'? Did you mean 'next'?
In fact, even if then look at the code, and you use 'current' after the
new value has been assigned to the percpu variable, we have explicitly
told the compiler that 'current' is magical and always stable. So the
compiler is quite free to use an older (or newer) value of 'current',
and the actual assignment to the percpu storage is not relevant even if
it might look that way.
Which is exactly what happened in the resctl code, that blithely used
'current' in '__resctrl_sched_in()' when it really wanted the new
process state (as implied by the name: we're scheduling 'into' that new
resctl state). And clang would end up just using the old thread pointer
value at least in some configurations.
This could have happened with gcc too, and purely depends on random
compiler details. Clang just seems to have been more aggressive about
moving the read of the per-cpu current_task pointer around.
The fix is trivial: just make the resctl code adhere to the scheduler
rules of using the prev/next thread pointer explicitly, instead of using
'current' in a situation where it just wasn't valid.
That same code is then also used outside of the scheduler context (when
a thread resctl state is explicitly changed), and then we will just pass
in 'current' as that pointer, of course. There is no ambiguity in that
case.
The fix may be trivial, but noticing and figuring out what went wrong
was not. The credit for that goes to Stephane Eranian.
A CPU's current task can have its {closid, rmid} fields read locally
while they are being concurrently written to from another CPU.
This can happen anytime __resctrl_sched_in() races with either
__rdtgroup_move_task() or rdt_move_group_tasks().
Prevent load / store tearing for those accesses by giving them the
READ_ONCE() / WRITE_ONCE() treatment.
syzbot sent a hung task report and Eric explains that adversarial
receiver may keep RWIN at 0 for a long time, so we are not guaranteed
to make forward progress. Thread which took tx_lock and went to sleep
may not release tx_lock for hours. Use interruptible sleep where
possible and reschedule the work if it can't take the lock.
The dp and ufp are defined as bool type, the return value type of
function extcon_get_state should be int, so the type of dp and ufp
are modified to int.
./drivers/phy/rockchip/phy-rockchip-typec.c:827:12-14: WARNING: Unsigned expression compared with zero: dp > 0.
Wangxun has verified there is no peer-to-peer between functions for the
below selection of SFxxx, RP1000 and RP2000 NICS. They may be
multi-function devices, but the hardware does not advertise ACS capability.
Add an ACS quirk for these devices so the functions can be in independent
IOMMU groups.
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
The color matching descriptors defined in the UVC Specification
contain 3 fields with discrete numeric values representing particular
settings. Enumerate those values so that later code setting them can
be more readable.
The allocation of PageBuffer is 512 bytes in size, but the dereferencing
of struct ms_bootblock_idi (also size 512) happens at a calculated offset
within the allocation, which means the object could potentially extend
beyond the end of the allocation. Avoid this case by just allocating
enough space to catch any accesses beyond the end. Seen with GCC 13:
../drivers/usb/storage/ene_ub6250.c: In function 'ms_lib_process_bootblock':
../drivers/usb/storage/ene_ub6250.c:1050:44: warning: array subscript 'struct ms_bootblock_idi[0]' is partly outside array bounds of 'unsigned char[512]' [-Warray-bounds=]
1050 | if (le16_to_cpu(idi->wIDIgeneralConfiguration) != MS_IDI_GENERAL_CONF)
| ^~
../include/uapi/linux/byteorder/little_endian.h:37:51: note: in definition of macro '__le16_to_cpu'
37 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
| ^
../drivers/usb/storage/ene_ub6250.c:1050:29: note: in expansion of macro 'le16_to_cpu'
1050 | if (le16_to_cpu(idi->wIDIgeneralConfiguration) != MS_IDI_GENERAL_CONF)
| ^~~~~~~~~~~
In file included from ../drivers/usb/storage/ene_ub6250.c:5:
In function 'kmalloc',
inlined from 'ms_lib_process_bootblock' at ../drivers/usb/storage/ene_ub6250.c:942:15:
../include/linux/slab.h:580:24: note: at offset [256, 512] into object of size 512 allocated by 'kmalloc_trace'
580 | return kmalloc_trace(
| ^~~~~~~~~~~~~~
581 | kmalloc_caches[kmalloc_type(flags)][index],
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
582 | flags, size);
| ~~~~~~~~~~~~
Walking the dram->cs array was seen as accesses beyond the first array
item by the compiler. Instead, use the array index directly. This allows
for run-time bounds checking under CONFIG_UBSAN_BOUNDS as well. Seen
with GCC 13 with -fstrict-flex-arrays:
In function 'xhci_mvebu_mbus_config',
inlined from 'xhci_mvebu_mbus_init_quirk' at ../drivers/usb/host/xhci-mvebu.c:66:2:
../drivers/usb/host/xhci-mvebu.c:37:28: warning: array subscript 0 is outside array bounds of 'const struct mbus_dram_window[0]' [-Warray-bounds=]
37 | writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
| ~~^~~~~~
LPUART IP has a bug that it treats the CTS as higher priority than the
break signal, which cause the break signal sending through UARTCTRL_SBK
may impacted by the CTS input if the HW flow control is enabled.
Add this workaround patch to fix the IP bug, we can disable CTS before
asserting SBK to avoid any interference from CTS, and re-enable it when
break off.
Such as for the bluetooth chip power save feature, host can let the BT
chip get into sleep state by sending a UART break signal, and wake it up
by turning off the UART break. If the BT chip enters the sleep mode
successfully, it will pull up the CTS line, if the BT chip is woken up,
it will pull down the CTS line. If without this workaround patch, the
UART TX pin cannot send the break signal successfully as it affected by
the BT CTS pin. After adding this patch, the BT power save feature can
work well.
When specifying an invalid console= device like console=tty3270,
tty_driver_lookup_tty() returns the tty struct without checking
whether index is a valid number.
The memcpy() in uvc_video_decode_meta() intentionally copies across the
length and flags members and into the trailing buf flexible array.
Split the copy so that the compiler can better reason about (the lack
of) buffer overflows here. Avoid the run-time false positive warning:
memcpy: detected field-spanning write (size 12) of single field "&meta->length" at drivers/media/usb/uvc/uvc_video.c:1355 (size 1)
Additionally fix a typo in the documentation for struct uvc_meta_buf.
Logitech B910 and C910 firmware are unable to recover from a USB
autosuspend. When it resumes, the device is in a state where it only
produces invalid frames. Eg:
$ echo 0xFFFF > /sys/module/uvcvideo/parameters/trace # enable verbose log
$ yavta -c1 -n1 --file='frame#.jpg' --format MJPEG --size=1920x1080 /dev/video1
[350438.435219] uvcvideo: uvc_v4l2_open
[350438.529794] uvcvideo: Resuming interface 2
[350438.529801] uvcvideo: Resuming interface 3
[350438.529991] uvcvideo: Trying format 0x47504a4d (MJPG): 1920x1080.
[350438.529996] uvcvideo: Using default frame interval 33333.3 us (30.0 fps).
[350438.551496] uvcvideo: uvc_v4l2_mmap
[350438.555890] uvcvideo: Device requested 3060 B/frame bandwidth.
[350438.555896] uvcvideo: Selecting alternate setting 11 (3060 B/frame bandwidth).
[350438.556362] uvcvideo: Allocated 5 URB buffers of 32x3060 bytes each.
[350439.316468] uvcvideo: Marking buffer as bad (error bit set).
[350439.316475] uvcvideo: Frame complete (EOF found).
[350439.316477] uvcvideo: EOF in empty payload.
[350439.316484] uvcvideo: frame 1 stats: 149/261/417 packets, 1/149/417 pts (early initial), 416/417 scr, last pts/stc/sof 2976325734/2978107243/249
[350439.384510] uvcvideo: Marking buffer as bad (error bit set).
[350439.384516] uvcvideo: Frame complete (EOF found).
[350439.384518] uvcvideo: EOF in empty payload.
[350439.384525] uvcvideo: frame 2 stats: 265/379/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2979524454/2981305193/316
[350439.448472] uvcvideo: Marking buffer as bad (error bit set).
[350439.448478] uvcvideo: Frame complete (EOF found).
[350439.448480] uvcvideo: EOF in empty payload.
[350439.448487] uvcvideo: frame 3 stats: 265/377/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2982723174/2984503144/382
...(loop)...
The devices can leave this invalid state if the alternate setting of
the streaming interface is toggled.
This patch adds a quirk for this device so it can be autosuspended
properly.
lsusb -v:
Bus 001 Device 049: ID 046d:0821 Logitech, Inc. HD Webcam C910
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 239 Miscellaneous Device
bDeviceSubClass 2
bDeviceProtocol 1 Interface Association
bMaxPacketSize0 64
idVendor 0x046d Logitech, Inc.
idProduct 0x0821 HD Webcam C910
bcdDevice 0.10
iManufacturer 0
iProduct 0
iSerial 1 390022B0
bNumConfigurations 1
On a Webcam from Quanta, we see the following error.
usb 3-5: New USB device found, idVendor=0408, idProduct=30d2, bcdDevice= 0.03
usb 3-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 3-5: Product: USB2.0 HD UVC WebCam
usb 3-5: Manufacturer: Quanta
usb 3-5: SerialNumber: 0x0001
...
uvcvideo: Found UVC 1.10 device USB2.0 HD UVC WebCam (0408:30d2)
uvcvideo: Failed to initialize entity for entity 5
uvcvideo: Failed to register entities (-22).
The Webcam reports an entity of type UVC_VC_EXTENSION_UNIT. It reports a
string index of '7' associated with that entity. The attempt to read that
string from the camera fails with error -32 (-EPIPE). usb_string() returns
that error, but it is ignored. As result, the entity name is empty. This
later causes v4l2_device_register_subdev() to return -EINVAL, and no
entities are registered as result.
While this appears to be a firmware problem with the camera, the kernel
should still handle the situation gracefully. To do that, check the return
value from usb_string(). If it reports an error, assign the entity's
default name.
Another Lenovo convertable which reports a landscape resolution of
1920x1200 with a pitch of (1920 * 4) bytes, while the actual framebuffer
has a resolution of 1200x1920 with a pitch of (1200 * 4) bytes.
Signed-off-by: Darrell Kavanagh <darrell.kavanagh@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
In a previous commit 236121c2d655, buffer, buffer->buffers and
buffer->buffers[cpu] in ring_buffer_wake_waiters() can be NULL,
and thus the related checks are added.
However, in the same call stack, these variables are also used in
ring_buffer_free_read_page():
tracing_buffers_release()
ring_buffer_wake_waiters(iter->array_buffer->buffer)
cpu_buffer = buffer->buffers[cpu] -> Add checks by previous commit
ring_buffer_free_read_page(iter->array_buffer->buffer)
cpu_buffer = buffer->buffers[cpu] -> No check
Thus, to avod possible null-pointer derefernces, the related checks
should be added.
These results are reported by a static tool designed by myself.
REGMAP is a hidden (not user visible) symbol. Users cannot set it
directly thru "make *config", so drivers should select it instead of
depending on it if they need it.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change the use of "depends on REGMAP" to "select REGMAP".
Fixes: a6b647067f68 ("thermal: add Intel BXT WhiskeyCove PMIC thermal driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The ipr_log_vpd_compact() function triggers a fortified memcpy() warning
about a potential string overflow with all versions of clang:
In file included from drivers/scsi/ipr.c:43:
In file included from include/linux/string.h:254:
include/linux/fortify-string.h:520:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
__write_overflow_field(p_size_field, size);
^
include/linux/fortify-string.h:520:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
2 errors generated.
I don't see anything actually wrong with the function, but this is the only
instance I can reproduce of the fortification going wrong in the kernel at
the moment, so the easiest solution may be to rewrite the function into
something that does not trigger the warning.
Instead of having a combined buffer for vendor/device/serial strings, use
three separate local variables and just truncate the whitespace
individually.
Link: https://lore.kernel.org/r/20230214132831.2118392-1-arnd@kernel.org Cc: Kees Cook <keescook@chromium.org> Fixes: d4e226389d3e ("[SCSI] ipr: Improved dual adapter errors") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
On all variants of the hardware, the internal oscillator is one possible
parent for the AR100 clock. It needs to be exported so we can model that
relationship correctly in the devicetree.
Fixes: 6879f7aa3f1f ("rtc: sun6i: Expose internal oscillator through device tree") Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20221229215319.14145-1-samuel@sholland.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
Some boards, like OrangePi PC2 (H5), OrangePi Plus 2E (H3) and Tanix TX6
(H6) don't have external 32kHz oscillator. Till H6, it didn't really
matter if external oscillator was enabled because HW detected error and
fall back to internal one. H6 has same functionality but it's the first
SoC which have "auto switch bypass" bit documented and always enabled in
driver. This prevents RTC to work correctly if external crystal is not
present on board. There are other side effects - all peripherals which
depends on this clock also don't work (HDMI CEC for example).
Make clocks property optional. If it is present, select external
oscillator. If not, stay on internal.
The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action sample ... index 1
tc filter add ... action pedit index 1
In the current code for act_sample this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.
tdc results:
1..29
ok 1 9784 - Add valid sample action with mandatory arguments
ok 2 5c91 - Add valid sample action with mandatory arguments and continue control action
ok 3 334b - Add valid sample action with mandatory arguments and drop control action
ok 4 da69 - Add valid sample action with mandatory arguments and reclassify control action
ok 5 13ce - Add valid sample action with mandatory arguments and pipe control action
ok 6 1886 - Add valid sample action with mandatory arguments and jump control action
ok 7 7571 - Add sample action with invalid rate
ok 8 b6d4 - Add sample action with mandatory arguments and invalid control action
ok 9 a874 - Add invalid sample action without mandatory arguments
ok 10 ac01 - Add invalid sample action without mandatory argument rate
ok 11 4203 - Add invalid sample action without mandatory argument group
ok 12 14a7 - Add invalid sample action without mandatory argument group
ok 13 8f2e - Add valid sample action with trunc argument
ok 14 45f8 - Add sample action with maximum rate argument
ok 15 ad0c - Add sample action with maximum trunc argument
ok 16 83a9 - Add sample action with maximum group argument
ok 17 ed27 - Add sample action with invalid rate argument
ok 18 2eae - Add sample action with invalid group argument
ok 19 6ff3 - Add sample action with invalid trunc size
ok 20 2b2a - Add sample action with invalid index
ok 21 dee2 - Add sample action with maximum allowed index
ok 22 560e - Add sample action with cookie
ok 23 704a - Replace existing sample action with new rate argument
ok 24 60eb - Replace existing sample action with new group argument
ok 25 2cce - Replace existing sample action with new trunc argument
ok 26 59d1 - Replace existing sample action with new control argument
ok 27 0a6e - Replace sample action with invalid goto chain control
ok 28 3872 - Delete sample action with valid index
ok 29 a394 - Delete sample action with invalid index
Fixes: fde70ae9fd2f ("net/sched: Introduce sample tc action") Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
The callback context for sending/receiving APDUs to/from the selected
secure element is allocated inside nfc_genl_se_io and supposed to be
eventually freed in se_io_cb callback function. However, there are several
error paths where the bwi_timer is not charged to call se_io_cb later, and
the cb_context is leaked.
The patch proposes to free the cb_context explicitly on those error paths.
At the moment we can't simply check 'dev->ops->se_io()' return value as it
may be negative in both cases: when the timer was charged and was not.
Fixes: 93b728042fb4 ("NFC: netlink: SE API implementation") Reported-by: syzbot+df64c0a2e8d68e78a4fa@syzkaller.appspotmail.com Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
On success, mlx5_geneve_tlv_option_create returns non negative
Geneve object id. In case the object id is positive value the
caller functions will handle it as an error (non zero) and
will fail to offload the Geneve rule.
Fix this by changing caller function ,mlx5_geneve_tlv_option_add,
to return 0 in case valid non negative object id was provided.
When down_interruptible() or ib_post_send() failed in rdma_request(),
receive dma buffer is not unmapped. Add unmap action to error path.
Also if ib_post_recv() failed in post_recv(), dma buffer is not unmapped.
Add unmap action to error path.
Link: https://lkml.kernel.org/r/20230104020424.611926-1-shaozhengchao@huawei.com Fixes: 5b5ab164b3f3 ("9p: rdma: RDMA Transport Support for 9P") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Today the connection sequence of the Xen 9pfs frontend doesn't match
the documented sequence. It can work reliably only for a PV 9pfs device
having been added at boot time already, as the frontend is not waiting
for the backend to have set its state to "XenbusStateInitWait" before
reading the backend properties from Xenstore.
Fix that by following the documented sequence [1] (the documentation
has a bug, so the reference is for the patch fixing that).
When connecting the Xen 9pfs frontend to the backend, the "versions"
Xenstore entry written by the backend is parsed in a wrong way.
The "versions" entry is defined to contain the versions supported by
the backend separated by commas (e.g. "1,2"). Today only version "1"
is defined. Unfortunately the frontend doesn't look for "1" being
listed in the entry, but it is expecting the entry to have the value
"1".
This will result in failure as soon as the backend will support e.g.
versions "1" and "2".
Fix that by scanning the entry correctly.
Link: https://lkml.kernel.org/r/20230130113036.7087-2-jgross@suse.com Fixes: e01cba69d3a9 ("xen/9pfs: connect to the backend") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
When a driver is dropping a packet by calling dev_kfree_skb_any()
we should propagate the drop reason instead of pretending
the packet was consumed.
Note: Now we have enum skb_drop_reason we could remove
enum skb_free_reason (for linux-6.4)
v2: added an unlikely(), suggested by Yunsheng Lin.
Fixes: 6630035b286c ("net: introduce dev_consume_skb_any()") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yunsheng Lin <linyunsheng@huawei.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
With this refcnt added in sctp_stream_priorities, we don't need to
traverse all streams to check if the prio is used by other streams
when freeing one stream's prio in sctp_sched_prio_free_sid(). This
can avoid a nested loop (up to 65535 * 65535), which may cause a
stuck as Ying reported:
In function rt6_nlmsg_size(), the length of nexthop is calculated
by multipling the nexthop length of fib6_info and the number of
siblings. However if the fib6_info has no lwtunnel but the siblings
have lwtunnels, the nexthop length is less than it should be, and
it will trigger a warning in inet6_rt_notify() as follows:
The stack variable msb and lsb may be used uninitialized in function
usb_pcwd_get_temperature and usb_pcwd_get_timeleft when usb card no response.
The build waring is:
drivers/watchdog/pcwd_usb.c:336:22: error: ‘lsb’ is used uninitialized in this function [-Werror=uninitialized]
*temperature = (lsb * 9 / 5) + 32;
~~~~^~~
drivers/watchdog/pcwd_usb.c:328:21: note: ‘lsb’ was declared here
unsigned char msb, lsb;
^~~
cc1: all warnings being treated as errors
scripts/Makefile.build:250: recipe for target 'drivers/watchdog/pcwd_usb.o' failed
make[3]: *** [drivers/watchdog/pcwd_usb.o] Error 1
Fixes: 86dfb2deef25 ("mv watchdog tree under drivers") Signed-off-by: Li Hua <hucool.lihua@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221116020706.70847-1-hucool.lihua@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
The 'syscall' instruction clobbers '%rcx' and '%r11', but they are not
listed in the inline Assembly that performs the syscall instruction.
No real bug is found. It wasn't buggy by luck because '%rcx' and '%r11'
are caller-saved registers, and not used in the functions, and the
functions are never inlined.
Add them to the clobber list for code correctness.
Fixes: 07717e169e6225855229638f3890b3970fda80d5 ("um: implement a x86_64 vDSO") Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
$ top
PID USER PR NI VIRT RES SHR S %CPU %MEM COMMAND
7676 root 20 0 0 0 0 R 100.0 0.0 ubifs_bgt0_0
Fix it by:
1) Letting ubi_wl_put_peb() returns directly if wearl leveling entry has
been removed from 'ubi->lookuptbl'.
2) Using 'ubi->wl_lock' protecting wl entry deletion to preventing an
use-after-free problem for wl entry in ubi_wl_put_peb().
Fetch a reproducer in [Link].
Fixes: 55446cd8a30c407 ("UBI: bugfix: protect from volume removal") Fixes: 319e220aa904b01 ("UBI: Fix stale pointers in ubi->lookuptbl") Link: https://bugzilla.kernel.org/show_bug.cgi?id=216111 Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
Wear-leveling entry updating/accessing in ubi->lookuptbl should be
protected by ubi->wl_lock, fix it by adding ubi->wl_lock to serialize
wl entry accessing between wl_entry_destroy() and
eraseblk_count_seq_show().
Following process will cause a memleak for copied up znode:
dirty_cow_znode
zn = copy_znode(c, znode);
err = insert_old_idx(c, zbr->lnum, zbr->offs);
if (unlikely(err))
return ERR_PTR(err); // No one refers to zn.
Fix it by adding copied znode back to tnc, then it will be freed
by ubifs_destroy_tnc_subtree() while closing tnc.
Dirty znodes will be written on flash in committing process with
following states:
process A | znode state
------------------------------------------------------
do_commit | DIRTY_ZNODE
ubifs_tnc_start_commit | DIRTY_ZNODE
get_znodes_to_commit | DIRTY_ZNODE | COW_ZNODE
layout_commit | DIRTY_ZNODE | COW_ZNODE
fill_gap | 0
write master | 0 or OBSOLETE_ZNODE
process B | znode state
------------------------------------------------------
do_commit | DIRTY_ZNODE[1]
ubifs_tnc_start_commit | DIRTY_ZNODE
get_znodes_to_commit | DIRTY_ZNODE | COW_ZNODE
ubifs_tnc_end_commit | DIRTY_ZNODE | COW_ZNODE
write_index | 0
write master | 0 or OBSOLETE_ZNODE[2] or
| DIRTY_ZNODE[3]
[1] znode is dirtied without concurrent committing process
[2] znode is copied up (re-dirtied by other process) before cleaned
up in committing process
[3] znode is re-dirtied after cleaned up in committing process
Currently, the clean znode count is updated in free_obsolete_znodes(),
which is called only in normal path. If do_commit failed, clean znode
count won't be updated, which triggers a failure ubifs assertion[4] in
ubifs_tnc_close():
ubifs_assert_failed [ubifs]: UBIFS assert failed: freed == n
[4] Commit 2c449a8afc3d71 ("UBIFS: Add an assertion for clean_zn_cnt").
Fix it by re-statisticing cleaned znode count in tnc_destroy_cnext().
It willl cause null-ptr-deref in the following case:
uif_init()
ubi_add_volume()
cdev_add() -> if it fails, call kill_volumes()
device_register()
kill_volumes() -> if ubi_add_volume() fails call this function
ubi_free_volume()
cdev_del()
device_unregister() -> trying to delete a not added device,
it causes null-ptr-deref
So in ubi_free_volume(), it delete devices whether they are added
or not, it will causes null-ptr-deref.
Handle the error case whlie calling ubi_add_volume() to fix this
problem. If add volume fails, set the corresponding vol to null,
so it can not be accessed in kill_volumes() and release the
resource in ubi_add_volume() error path.
The problem is that the ubifs_wbuf_init() returns an error in the
loop which in the alloc_wbufs(), then the wbuf->buf and wbuf->inodes
that were successfully alloced before are not freed.
Fix it by adding error hanging path in alloc_wbufs() which frees
the memory alloced before when ubifs_wbuf_init() returns an error.
Fixes: 974763da840d ("UBIFS: add new flash file system") Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
This is due to a mismatch between create and destroy interfaces, and
in detail that "new_eba_tbl" created by ubi_eba_create_table() but
destroyed by kfree(), while will causing "new_eba_tbl->entries" not
freed.
Fix it by replacing kfree(new_eba_tbl) with
ubi_eba_destroy_table(new_eba_tbl)
There is an use-after-free problem reported by KASAN:
==================================================================
BUG: KASAN: use-after-free in ubi_eba_copy_table+0x11f/0x1c0 [ubi]
Read of size 8 at addr ffff888101eec008 by task ubirsvol/4735
When ubi_change_vtbl_record() returns an error in ubi_resize_volume(),
"new_eba_tbl" will be freed on error handing path, but it is holded
by "vol->eba_tbl" in ubi_eba_replace_table(). It means that the liftcycle
of "vol->eba_tbl" and "vol" are different, so when resizing volume in
next time, it causing an use-after-free fault.
Fix it by not freeing "new_eba_tbl" after it replaced in
ubi_eba_replace_table(), while will be freed in next volume resizing.
UBIFS calculates available space by c->main_bytes - c->lst.total_used
(which means non-index lebs' free and dirty space is accounted into
total available), then index lebs and four lebs (one for gc_lnum, one
for deletions, two for journal heads) are deducted.
In following situation, ubifs may get -ENOSPC from make_reservation():
LEB 84: DATAHD free 122880 used 1920 dirty 2176 dark 6144
LEB 110:DELETION free 126976 used 0 dirty 0 dark 6144 (empty)
LEB 201:gc_lnum free 126976 used 0 dirty 0 dark 6144
LEB 272:GCHD free 77824 used 47672 dirty 1480 dark 6144
LEB 356:BASEHD free 0 used 39776 dirty 87200 dark 6144
OTHERS: index lebs, zero-available non-index lebs
UBIFS calculates the available bytes is 6888 (How to calculate it:
126976 * 5[remain main bytes] - 1920[used] - 47672[used] - 39776[used] -
126976 * 1[deletions] - 126976 * 1[gc_lnum] - 126976 * 2[journal heads]
- 6144 * 5[dark] = 6888) after doing budget, however UBIFS cannot use
BASEHD's dirty space(87200), because UBIFS cannot find next BASEHD to
reclaim current BASEHD. (c->bi.min_idx_lebs equals to c->lst.idx_lebs,
the empty leb won't be found by ubifs_find_free_space(), and dirty index
lebs won't be picked as gced lebs. All non-index lebs has dirty space
less then c->dead_wm, non-index lebs won't be picked as gced lebs
either. So new free lebs won't be produced.). See more details in Link.
To fix it, reserve one leb for each journal head while doing budget.
If target inode is a special file (eg. block/char device) with nlink
count greater than 1, the inode with ui->data will be re-written on
disk. However, UBIFS losts target inode's data_len while doing space
budget. Bad space budget may let make_reservation() return with -ENOSPC,
which could turn ubifs to read-only mode in do_writepage() process.
Each dirty inode should reserve 'c->bi.inode_budget' bytes in space
budget calculation. Currently, space budget for dirty inode reports
more space than what UBIFS actually needs to write.
Fixes: 974763da840dbf ("UBIFS: add new flash file system") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
There is no space budget for ubifs_xrename(). It may let
make_reservation() return with -ENOSPC, which could turn
ubifs to read-only mode in do_writepage() process.
Fix it by adding space budget for ubifs_xrename().
Fix bad space budget when symlink file is encrypted. Bad space budget
may let make_reservation() return with -ENOSPC, which could turn ubifs
to read-only mode in do_writepage() process.
Fetch a reproducer in [Link].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216490 Fixes: eeebf7b0eadbcb ("ubifs: Add support for encrypted symlinks") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
With CONFIG_UBIFS_FS_AUTHENTICATION not set, the compiler can assume that
ubifs_node_check_hash() is never true and drops the call to ubifs_bad_hash().
Is CONFIG_CC_OPTIMIZE_FOR_SIZE enabled this optimization does not happen anymore.
So When CONFIG_UBIFS_FS and CONFIG_CC_OPTIMIZE_FOR_SIZE is enabled but
CONFIG_UBIFS_FS_AUTHENTICATION is not set, the build errors is as followd:
ERROR: modpost: "ubifs_bad_hash" [fs/ubifs/ubifs.ko] undefined!
Fix it by add no-op ubifs_bad_hash() for the CONFIG_UBIFS_FS_AUTHENTICATION=n case.
Fixes: da7458a739d6 ("ubifs: authentication: Add hashes to index nodes") Signed-off-by: Li Hua <hucool.lihua@huawei.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
Ensure that the VID header offset + VID header size does not exceed
the allocated area to avoid slab OOB.
BUG: KASAN: slab-out-of-bounds in crc32_body lib/crc32.c:111 [inline]
BUG: KASAN: slab-out-of-bounds in crc32_le_generic lib/crc32.c:179 [inline]
BUG: KASAN: slab-out-of-bounds in crc32_le_base+0x58c/0x626 lib/crc32.c:197
Read of size 4 at addr ffff88802bb36f00 by task syz-executor136/1555
The buggy address belongs to the object at ffff88802bb36e00
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes to the right of
256-byte region [ffff88802bb36e00, ffff88802bb36f00)
Memory state around the buggy address: ffff88802bb36e00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88802bb36e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff88802bb36f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^ ffff88802bb36f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88802bb37000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
This is simpler, and as a side effect it replaces several uses of
kmap_atomic() with its recommended replacement kmap_local_page().
Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: b1b9896718bc ("fs: f2fs: initialize fsdata in pagecache_write()") Signed-off-by: Sasha Levin <sashal@kernel.org>
The ARR (auto reload register) and CMP (compare) registers are
successively written. The status bits to check the update of these
registers are polled together with regmap_read_poll_timeout().
The condition to end the loop may become true, even if one of the
register isn't correctly updated.
So ensure both status bits are set before clearing them.
Commit 5b293b88191e5e921f3a4e58711350e80892d01a added support for the
RGB and green PWM controlled LEDs on the HiFive Unmatched board
managed by the leds-pwm-multicolor and leds-pwm drivers respectively.
All three colours of the RGB LED and the green LED run from different
lines of the same PWM, but with the same period so this works fine when
the LED drivers are loaded one after the other.
Unfortunately it does expose a race in the PWM driver when both LED
drivers are loaded at roughly the same time. Here is an example:
Now both calls to pwm_sifive_apply will see that ddata->approx_period,
initially 0, is different from the requested period and the clock needs
to be updated. But since ddata->user_count >= 2 both calls will fail
with -EBUSY, which will then cause both LED drivers to fail to probe.
Fix it by letting the first call to pwm_sifive_apply update the clock
even when ddata->user_count != 1.
Fixes: 1afcd3819818 ("pwm: sifive: Add a driver for SiFive SoC PWM") Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
The lock is only to serialize access and update to user_count and
approx_period between different PWMs served by the same pwm_chip.
So the lock needs only to be taken during the check if the (chip global)
period can and/or needs to be changed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: 334c7b13d383 ("pwm: sifive: Always let the first pwm_apply_state succeed") Signed-off-by: Sasha Levin <sashal@kernel.org>
The tcindex classifier has served us well for about a quarter of a century
but has not been getting much TLC due to lack of known users. Most recently
it has become easy prey to syzkaller. For this reason, we are retiring it.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This code is executed by make at parse time and assumes that MAKEFLAGS
does not contain command line variable definitions.
Currently if the user defines a=s on the command line, then at build only
time MAKEFLAGS contains " -- a=s".
However, starting with commit dc2d963989b96161472b2cd38cef5d1f4851ea34
MAKEFLAGS contains command line definitions at both parse time and
build time.
This '-s' detection code then confuses a command line variable
definition which contains letter 's' with option -s.
$ # old make
$ make net/wireless/ocb.o a=s
CALL scripts/checksyscalls.sh
DESCEND objtool
$ # this a new make which defines makeflags at parse time
$ ~/src/gmake/make/l64/make net/wireless/ocb.o a=s
$
We can see here that the letter 's' from 'a=s' was confused with -s.
This patch checks for presence of -s using a method recommended by the
make manual here
https://www.gnu.org/software/make/manual/make.html#Testing-Flags.
Link: https://lists.gnu.org/archive/html/bug-make/2022-11/msg00190.html Reported-by: Jan Palus <jpalus+gnu@fastmail.com> Signed-off-by: Dmitry Goncharov <dgoncharov@users.sf.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A previous cleanup patch accidentally broke some conditional
expressions by replacing the safe "do {} while (0)" constructs
with empty macros. gcc points this out when extra warnings
are enabled:
drivers/net/wireless/ath/ath9k/hif_usb.c: In function 'ath9k_skb_queue_complete':
drivers/net/wireless/ath/ath9k/hif_usb.c:251:57: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body]
251 | TX_STAT_INC(hif_dev, skb_failed);
Make both sets of macros proper expressions again.
Fixes: 7f9e6dc7b39d ("ath9k: htc: clean up statistics macros") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221215165553.1950307-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Apple iMac11,2 (mid 2010) also with Radeon HD-4670 that has the same
issue as iMac10,1 (late 2009) where the internal eDP panel stays dark on
driver load. This patch treats iMac11,2 the same as iMac10,1,
so the eDP panel stays active.
Additional steps:
Kernel boot parameter radeon.nomodeset=0 required to keep the eDP
panel active.
This patch is an extension of
commit 52abb00228f6 ("drm/radeon: Fix eDP for single-display iMac10,1 (v2)") Link: https://lore.kernel.org/all/lsq.1507553064.833262317@decadent.org.uk/ Signed-off-by: Mark Hawrylak <mark.hawrylak@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PCI passthrough to VMs does not work with AMD FCH AHCI adapters: the guest
OS fails to correctly probe devices attached to the controller due to FIS
communication failures:
On surprise removal, pciehp_unconfigure_device() and acpiphp's
trim_stale_devices() call pci_dev_set_disconnected() to mark removed
devices as permanently offline. Thereby, the PCI core and drivers know
to skip device accesses.
However pci_dev_set_disconnected() takes the device_lock and thus waits for
a concurrent driver bind or unbind to complete. As a result, the driver's
->probe and ->remove hooks have no chance to learn that the device is gone.
That doesn't make any sense, so drop the device_lock and instead use atomic
xchg() and cmpxchg() operations to update the device state.
As a byproduct, an AB-BA deadlock reported by Anatoli is fixed which occurs
on surprise removal with AER concurrently performing a bus reset.
AER bus reset:
INFO: task irq/26-aerdrv:95 blocked for more than 120 seconds.
Tainted: G W 6.2.0-rc3-custom-norework-jan11+
schedule
rwsem_down_write_slowpath
down_write_nested
pciehp_reset_slot # acquires reset_lock
pci_reset_hotplug_slot
pci_slot_reset # acquires device_lock
pci_bus_error_reset
aer_root_reset
pcie_do_recovery
aer_process_err_devices
aer_isr
pciehp surprise removal:
INFO: task irq/26-pciehp:96 blocked for more than 120 seconds.
Tainted: G W 6.2.0-rc3-custom-norework-jan11+
schedule_preempt_disabled
__mutex_lock
mutex_lock_nested
pci_dev_set_disconnected # acquires device_lock
pci_walk_bus
pciehp_unconfigure_device
pciehp_disable_slot
pciehp_handle_presence_or_link_change
pciehp_ist # acquires reset_lock
However, pci_bridge_wait_for_secondary_bus() bails out if the bridge_d3
flag is not set. That flag indicates whether a bridge is allowed to
suspend to D3cold at *runtime*.
Hence *no* delay is observed on resume from system sleep if runtime
D3cold is forbidden. That doesn't make any sense, so drop the bridge_d3
check from pci_bridge_wait_for_secondary_bus().
The purpose of the bridge_d3 check was probably to avoid delays if a
bridge remained in D0 during suspend. However the sole caller of
pci_bridge_wait_for_secondary_bus(), pci_pm_bridge_power_up_actions(),
is only invoked if the previous power state was D3cold. Hence the
additional bridge_d3 check seems superfluous.
Fixes: 34cd7c4bc4b5 ("PCI/PM: Add missing link delays required by the PCIe spec") Link: https://lore.kernel.org/r/eb37fa345285ec8bacabbf06b020b803f77bdd3d.1673769517.git.lukas@wunner.de Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
BUG: KASAN: slab-out-of-bounds in ses_enclosure_data_process+0x949/0xe30 [ses]
Read of size 1 at addr ffff88a1b043a451 by task systemd-udevd/3271
Checking after (and before in next loop) addl_desc_ptr[1] is sufficient, we
expect the size to be sanitized before first access to addl_desc_ptr[1].
Make sure we don't walk beyond end of page.
Link: https://lore.kernel.org/r/20230202162451.15346-2-thenzl@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An enclosure with no components can't usefully be operated by the driver
(since effectively it has nothing to manage), so report the problem and
don't attach. Not attaching also fixes an oops which could occur if the
driver tries to manage a zero component enclosure.
[mkp: Switched to KERN_WARNING since this scenario is common]
Link: https://lore.kernel.org/r/c5deac044ac409e32d9ad9968ce0dcbc996bfc7a.camel@linux.ibm.com Cc: stable@vger.kernel.org Reported-by: Ding Hui <dinghui@sangfor.com.cn> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If after an adapter reset the appearance of link is not recovered, the
devices are not rediscovered. This is result of a race condition between
adapter reset (abort_isp) and the topology scan. During adapter reset, the
ABORT_ISP_ACTIVE flag is set. Topology scan usually occurred after adapter
reset. In this case, the topology scan came earlier than usual where it
ran into problem due to ABORT_ISP_ACTIVE flag was still set.
kernel: qla2xxx [0000:13:00.0]-1005:1: Cmd 0x6a aborted with timeout since ISP Abort is pending
kernel: qla2xxx [0000:13:00.0]-28a0:1: MBX_GET_PORT_NAME failed, No FL Port.
kernel: qla2xxx [0000:13:00.0]-286b:1: qla2x00_configure_loop: exiting normally. local port wwpn 51402ec0123d9a80 id 012300)
kernel: qla2xxx [0000:13:00.0]-8017:1: ADAPTER RESET SUCCEEDED nexus=1:0:15.
Allow adapter reset to complete before any scan can start.
User experienced symptoms of adapter failure in NPIV environment. NPIV
hosts were allowed to trigger chip reset back to back due to NPIV link
state being slow to come online.
Fix link failure in NPIV environment by removing NPIV host from directly
being able to perform chip reset.
kernel: qla2xxx [0000:04:00.1]-6009:261: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:262: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:281: Loop down - aborting ISP.
kernel: qla2xxx [0000:04:00.1]-6009:285: Loop down - aborting ISP
There is a disconnect between the run_command function and the
wait_for_input. The wait_for_input has a default timeout of 2 minutes. But
if that happens, the run_command loop will exit out to the waitpid() of
the executing command. This fails in that it no longer monitors the
command, and also, the ssh to the test box can hang when its finished, as
it's waiting for the pipe it's writing to to flush, but the loop that
reads that pipe has already exited, leaving the command stuck, and the
test hangs.
Instead, make the default "wait_for_input" of the run_command infinite,
and allow the user to override it if they want with a default timeout
option "RUN_TIMEOUT".
But this fixes the hang that happens when the pipe is full and the ssh
session never exits.
Cc: stable@vger.kernel.org Fixes: 943e4212751c5 ("ktest: Add timeout to ssh command") Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the "reboot" command, it does a check of the machine to see if it is
still alive with a simple "ssh echo" command. If it fails, it will assume
that a normal "ssh reboot" is not possible and force a power cycle.
In this case, the "start_monitor" is executed, but the "end_monitor" is
not, and this causes the screen will not be given back to the console. That
is, after the test, a "reset" command needs to be performed, as "echo" is
turned off.
Cc: stable@vger.kernel.org Fixes: aa8896990f75d ("ktest.pl: Powercycle the box on reboot if no connection can be made") Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / kernel.git / log