Linus Torvalds [Sat, 20 Nov 2021 19:05:10 +0000 (11:05 -0800)]
Merge tag 'block-5.16-2021-11-19' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Flip a cap check to avoid a selinux error (Alistair)
- Fix for a regression this merge window where we can miss a queue ref
put (me)
- Un-mark pstore-blk as broken, as the condition that triggered that
change has been rectified (Kees)
- Queue quiesce and sync fixes (Ming)
- FUA insertion fix (Ming)
- blk-cgroup error path put fix (Yu)
* tag 'block-5.16-2021-11-19' of git://git.kernel.dk/linux-block:
blk-mq: don't insert FUA request with data into scheduler queue
blk-cgroup: fix missing put device in error path from blkg_conf_pref()
block: avoid to quiesce queue in elevator_init_mq
Revert "mark pstore-blk as broken"
blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release()
block: fix missing queue put in error path
block: Check ADMIN before NICE for IOPRIO_CLASS_RT
Linus Torvalds [Sat, 20 Nov 2021 18:59:03 +0000 (10:59 -0800)]
Merge tag 'pinctrl-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"There is an ACPI stubs fix which is ACKed by the ACPI maintainer for
merging through my tree.
One item stand out and that is that I delete the <linux/sdb.h> header
that is used by nothing. I deleted this subsystem (through the GPIO
tree) a while back so I feel responsible for tidying up the floor.
Other than that it is the usual mistakes, a bit noisy around build
issue and Kconfig then driver fixes.
Specifics:
- Fix some stubs causing compile issues for ACPI.
- Fix some wakeups on AMD IRQs shared between GPIO and SCI.
- Fix a build warning in the Tegra driver.
- Fix a Kconfig issue in the Qualcomm driver.
- Add a missing include the RALink driver.
- Return a valid type for the Apple pinctrl IRQs.
- Implement some Qualcomm SDM845 dual-edge errata.
- Remove the unused <linux/sdb.h> header. (The subsystem was once
deleted by the pinctrl maintainer...)
- Fix a duplicate initialized in the Tegra driver.
- Fix register offsets for UFS and SDC in the Qualcomm SM8350 driver"
* tag 'pinctrl-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: sm8350: Correct UFS and SDC offsets
pinctrl: tegra194: remove duplicate initializer again
Remove unused header <linux/sdb.h>
pinctrl: qcom: sdm845: Enable dual edge errata
pinctrl: apple: Always return valid type in apple_gpio_irq_type
pinctrl: ralink: include 'ralink_regs.h' in 'pinctrl-mt7620.c'
pinctrl: qcom: fix unmet dependencies on GPIOLIB for GPIOLIB_IRQCHIP
pinctrl: tegra: Return const pointer from tegra_pinctrl_get_group()
pinctrl: amd: Fix wakeups when IRQ is shared with SCI
ACPI: Add stubs for wakeup handler functions
Linus Torvalds [Sat, 20 Nov 2021 18:55:50 +0000 (10:55 -0800)]
Merge tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add missing Kconfig option for ftrace direct multi sample, so it can
be compiled again, and also add s390 support for this sample.
- Update Christian Borntraeger's email address.
- Various fixes for memory layout setup. Besides other this makes it
possible to load shared DCSS segments again.
- Fix copy to user space of swapped kdump oldmem.
- Remove -mstack-guard and -mstack-size compile options when building
vdso binaries. This can happen when CONFIG_VMAP_STACK is disabled and
results in broken vdso code which causes more or less random
exceptions. Also remove the not needed -nostdlib option.
- Fix memory leak on cpu hotplug and return code handling in kexec
code.
- Wire up futex_waitv system call.
- Replace snprintf with sysfs_emit where appropriate.
* tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
ftrace/samples: add s390 support for ftrace direct multi sample
ftrace/samples: add missing Kconfig option for ftrace direct multi sample
MAINTAINERS: update email address of Christian Borntraeger
s390/kexec: fix memory leak of ipl report buffer
s390/kexec: fix return code handling
s390/dump: fix copying to user-space of swapped kdump oldmem
s390: wire up sys_futex_waitv system call
s390/vdso: filter out -mstack-guard and -mstack-size
s390/vdso: remove -nostdlib compiler flag
s390: replace snprintf in show functions with sysfs_emit
s390/boot: simplify and fix kernel memory layout setup
s390/setup: re-arrange memblock setup
s390/setup: avoid using memblock_enforce_memory_limit
s390/setup: avoid reserving memory above identity mapping
Linus Torvalds [Sat, 20 Nov 2021 18:47:16 +0000 (10:47 -0800)]
Merge tag '5.16-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small cifs/smb3 fixes: two to address minor coverity issues and
one cleanup"
* tag '5.16-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: introduce cifs_ses_mark_for_reconnect() helper
cifs: protect srv_count with cifs_tcp_ses_lock
cifs: move debug print out of spinlock
Linus Torvalds [Fri, 19 Nov 2021 22:15:14 +0000 (14:15 -0800)]
Merge tag 'libata-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull libata fixes from Damien Le Moal:
- Prevent accesses to unsupported log pages as that causes device scan
failures with LLDDs using libsas (from me).
- A couple of fixes for AMD AHCI adapters handling of low power modes
and resume (from Mario).
- Fix a compilation warning (from me).
* tag 'libata-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-sata: Declare ata_ncq_sdev_attrs static
ata: libahci: Adjust behavior when StorageD3Enable _DSD is set
ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
ata: libata: add missing ata_identify_page_supported() calls
ata: libata: improve ata_read_log_page() error message
Linus Torvalds [Fri, 19 Nov 2021 21:50:48 +0000 (13:50 -0800)]
Merge tag 'trace-v5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix double free in destroy_hist_field
- Harden memset() of trace_iterator structure
- Do not warn in trace printk check when test buffer fills up
* tag 'trace-v5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Don't use out-of-sync va_list in event printing
tracing: Use memset_startat() to zero struct trace_iterator
tracing/histogram: Fix UAF in destroy_hist_field()
Linus Torvalds [Fri, 19 Nov 2021 19:40:14 +0000 (11:40 -0800)]
Merge tag 'riscv-for-linus-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"I have two patches for 5.16:
- allow external modules to be built against read-only source trees
- turn KVM on in the defconfigs
The second one isn't technically a fix, but it got tied up pending
some defconfig cleanups that ended up finding some larger issues. I
figured it'd be better to get the config changes some more testing,
but didn't want to hold up turning KVM on for that"
* tag 'riscv-for-linus-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix building external modules
RISC-V: Enable KVM in RV64 and RV32 defconfigs as a module
Linus Torvalds [Fri, 19 Nov 2021 19:33:31 +0000 (11:33 -0800)]
Merge branch 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull exit-vs-signal handling fixes from Eric Biederman:
"This is a small set of changes where debuggers were no longer able to
intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit
cleanups.
This is essentially the change you suggested with all of i's dotted
and the t's crossed so that ptrace can intercept all of the cases it
has been able to intercept the past, and all of the cases that made it
to exit without giving ptrace a chance still don't give ptrace a
chance"
* 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
signal: Replace force_fatal_sig with force_exit_sig when in doubt
signal: Don't always set SA_IMMUTABLE for forced signals
Linus Torvalds [Fri, 19 Nov 2021 19:19:58 +0000 (11:19 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six fixes, five in drivers (ufs, qla2xxx, iscsi) and one core change
to fix a regression in user space device state setting, which is used
by the iscsi daemons to effect device recovery"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix mailbox direction flags in qla2xxx_get_adapter_id()
scsi: ufs: core: Fix another task management completion race
scsi: ufs: core: Fix task management completion timeout race
scsi: core: sysfs: Fix hang when device state is set via sysfs
scsi: iscsi: Unblock session then wake up error handler
scsi: ufs: core: Improve SCSI abort handling
Linus Torvalds [Fri, 19 Nov 2021 19:07:13 +0000 (11:07 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"There are a few big regression items from the merge window suggesting
that people are testing rc1's but not testing the for-next branches:
- Warnings fixes
- Crash in hf1 when creating QPs and setting counters
- Some old mlx4 cards fail to probe due to missing counters
- Syzkaller crash in the new counters code"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
MAINTAINERS: Update for VMware PVRDMA driver
RDMA/nldev: Check stat attribute before accessing it
RDMA/mlx4: Do not fail the registration on port stats
IB/hfi1: Properly allocate rdma counter desc memory
RDMA/core: Set send and receive CQ before forwarding to the driver
RDMA/netlink: Add __maybe_unused to static inline in C file
Linus Torvalds [Fri, 19 Nov 2021 18:50:11 +0000 (10:50 -0800)]
Merge tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"This week's fixes, pretty quiet, about right for rc2. amdgpu is the
bulk of them but the scheduler ones have been reported in a few places
I think.
Otherwise just some minor i915 fixes and a few other scattered around:
scheduler:
- two refcounting fixes
cma-helper:
- use correct free path for noncoherent
efifb:
- probing fix
amdgpu:
- Better debugging info for SMU msgs
- Better error reporting when adding IP blocks
- Fix UVD powergating regression on CZ
- Clock reporting fix for navi1x
- OLED panel backlight fix
- Fix scaling on VGA/DVI for non-DC display code
- Fix GLFCLK handling for RGP on some APUs
- fix potential memory leak
* tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drm:
drm/amd/amdgpu: fix potential memleak
drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again
drm/amd/pm: add GFXCLK/SCLK clocks level print support for APUs
drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors
drm/amd/display: Fix OLED brightness control on eDP
drm/amd/pm: Remove artificial freq level on Navi1x
drm/amd/pm: avoid duplicate powergate/ungate setting
drm/amdgpu: add error print when failing to add IP block(v2)
drm/amd/pm: Enhanced reporting also for a stuck command
drm/i915/guc: fix NULL vs IS_ERR() checking
drm/i915/dsi/xelpd: Fix the bit mask for wakeup GB
Revert "drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping"
fbdev: Prevent probing generic drivers if a FB is already registered
drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder
drm/scheduler: fix drm_sched_job_add_implicit_dependencies
drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY
drm/cma-helper: Release non-coherent memory with dma_free_noncoherent()
drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame
Peter Zijlstra [Fri, 19 Nov 2021 09:29:47 +0000 (10:29 +0100)]
x86: Pin task-stack in __get_wchan()
When commit 80472ff2479d ("x86: Fix __get_wchan() for !STACKTRACE")
moved from stacktrace to native unwind_*() usage, the
try_get_task_stack() got lost, leading to use-after-free issues for
dying tasks.
signal: Replace force_fatal_sig with force_exit_sig when in doubt
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.
Unfortunately this broke debuggers[1][2] which reasonably expect
to be able to trap synchronous SIGTRAP and SIGSEGV even when
the target process is not configured to handle those signals.
Add force_exit_sig and use it instead of force_fatal_sig where
historically the code has directly called do_exit. This has the
implementation benefits of going through the signal exit path
(including generating core dumps) without the danger of allowing
userspace to ignore or change these signals.
This avoids userspace regressions as older kernels exited with do_exit
which debuggers also can not intercept.
In the future is should be possible to improve the quality of
implementation of the kernel by changing some of these force_exit_sig
calls to force_fatal_sig. That can be done where it matters on
a case-by-case basis with careful analysis.
Reported-by: Kyle Huey <me@kylehuey.com> Reported-by: kernel test robot <oliver.sang@intel.com>
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: a2a2dd8f85de ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Fixes: 856705c39f8a ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die") Fixes: fc99908855da ("signal/powerpc: On swapcontext failure force SIGSEGV") Fixes: 21d81bf71bfe ("signal/s390: Use force_sigsegv in default_trap_handler") Fixes: e98d91d2e629 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig") Fixes: 908486441621 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails") Fixes: eed3b85106a0 ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit") Fixes: cac0eb1efcc3 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.") Fixes: 05466dc15414 ("exit/syscall_user_dispatch: Send ordinary signals on failure") Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <khuey@kylehuey.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
signal: Don't always set SA_IMMUTABLE for forced signals
Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.
Unfortunately this broke debuggers[1][2] which reasonably expect to be
able to trap synchronous SIGTRAP and SIGSEGV even when the target
process is not configured to handle those signals.
Update force_sig_to_task to support both the case when we can allow
the debugger to intercept and possibly ignore the signal and the case
when it is not safe to let userspace know about the signal until the
process has exited.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Kyle Huey <me@kylehuey.com> Reported-by: kernel test robot <oliver.sang@intel.com> Cc: stable@vger.kernel.org
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020 Fixes: a2a2dd8f85de ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed") Link: https://lkml.kernel.org/r/877dd5qfw5.fsf_-_@email.froward.int.ebiederm.org Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Tested-by: Kyle Huey <khuey@kylehuey.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Ming Lei [Thu, 18 Nov 2021 15:30:41 +0000 (23:30 +0800)]
blk-mq: don't insert FUA request with data into scheduler queue
We never insert flush request into scheduler queue before.
Recently commit d55e1f141323 ("blk-mq: don't handle non-flush requests in
blk_insert_flush") tries to handle FUA data request as normal request.
This way has caused warning[1] in mq-deadline dd_exit_sched() or io hang in
case of kyber since RQF_ELVPRIV isn't set for flush request, then
->finish_request won't be called.
Fix the issue by inserting FUA data request with blk_mq_request_bypass_insert()
when the device supports FUA, just like what we did before.
Dave Airlie [Fri, 19 Nov 2021 03:28:54 +0000 (13:28 +1000)]
Merge tag 'drm-misc-fixes-2021-11-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A infoframe corruption fix for nouveau, a wrong free function usage fix
for GEM CMA helpers, a Kconfig dependency fix for sun4i, two fixes for
drm/scheduler refcounting and a probing fix for efifb.
tracing: Don't use out-of-sync va_list in event printing
If trace_seq becomes full, trace_seq_vprintf() no longer consumes
arguments from va_list, making va_list out of sync with format
processing by trace_check_vprintf().
This causes va_arg() in trace_check_vprintf() to return wrong
positional argument, which results into a WARN_ON_ONCE() hit.
ftrace_stress_test from LTP triggers this situation.
Fix it by explicitly avoiding further use if va_list at the point
when it's consistency can no longer be guaranteed.
Kees Cook [Thu, 18 Nov 2021 20:22:17 +0000 (12:22 -0800)]
tracing: Use memset_startat() to zero struct trace_iterator
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memset(), avoid intentionally writing across
neighboring fields.
Use memset_startat() to avoid confusing memset() about writing beyond
the target struct member.
Linus Torvalds [Fri, 19 Nov 2021 01:09:05 +0000 (17:09 -0800)]
Merge tag 'zstd-for-linus-5.16-rc1' of git://github.com/terrelln/linux
Pull zstd fixes from Nick Terrell:
"Fix stack usage on parisc & improve code size bloat
This contains three commits:
1. Fixes a minor unused variable warning reported by Kernel test
robot [0].
2. Improves the reported code bloat (-88KB / 374KB) [1] by outlining
some functions that are unlikely to be used in performance
sensitive workloads.
3. Fixes the reported excess stack usage on parisc [2] by removing
-O3 from zstd's compilation flags. -O3 triggered bugs in the
hppa-linux-gnu gcc-8 compiler. -O2 performance is acceptable:
neutral compression, about -1% decompression speed. We also reduce
code bloat (-105KB / 374KB).
After this our code bloat is cut from 374KB to 105KB with gcc-11. If
we wanted to cut the remaining 105KB we'd likely have to trade
signicant performance, so I want to say that this is enough for now.
We should be able to get further gains without sacrificing speed, but
that will take some significant optimization effort, and isn't
suitable for a quick fix. I've opened an upstream issue [3] to track
the code size, and try to avoid future regressions, and improve it in
the long term"
Linus Torvalds [Thu, 18 Nov 2021 22:52:24 +0000 (14:52 -0800)]
Merge tag 'thermal-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix the handling of thermal zones during system resume and
disable building of the int340x thermal driver on 32-bit.
Specifics:
- Prevent the previous high and low thermal zone trip values from
being retained over a system suspend-resume cycle (Manaf
Meethalavalappu Pallikunhi)
- Prevent the int340x thermal driver from being built in 32-bit
kernel configurations, because running it on 32-bit is questionable
(Arnd Bergmann)"
* tag 'thermal-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Reset previous low and high trip during thermal zone init
thermal: int340x: Limit Kconfig to 64-bit
Linus Torvalds [Thu, 18 Nov 2021 22:46:28 +0000 (14:46 -0800)]
Merge tag 'pm-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a system-wide suspend issue in the DTPM framework and
improve the Energy Model documentation.
Specifics:
- Fix system suspend handling in DTPM when it is enabled, but not
actually used (Daniel Lezcano)
- Describe the new cpufreq callback for Energy Model registration and
explain the "advanced" and "simple" EM variants in the EM
documentation (Lukasz Luba)"
* tag 'pm-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: power: Describe 'advanced' and 'simple' EM models
Documentation: power: Add description about new callback for EM registration
powercap: DTPM: Fix suspend failure and kernel warning
Linus Torvalds [Thu, 18 Nov 2021 22:42:36 +0000 (14:42 -0800)]
Merge tag 'acpi-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Revert the change attempting to release PM resources blocked by unused
ACPI objects after device enumeration, because it caused boot issues
to appear on multiple systems"
* tag 'acpi-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: scan: Release PM resources blocked by unused objects"
Linus Torvalds [Thu, 18 Nov 2021 22:39:40 +0000 (14:39 -0800)]
Merge tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Various build- and bug-fixes as well as one hardware-id addition"
* tag 'platform-drivers-x86-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: fix documentation for adaptive keyboard
platform/x86: thinkpad_acpi: Fix WWAN device disabled issue after S3 deep
platform/x86: thinkpad_acpi: Add support for dual fan control
platform/x86: think-lmi: Abort probe on analyze failure
platform/x86: dell-wmi-descriptor: disable by default
platform/x86: samsung-laptop: Fix typo in a comment
platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'
platform/x86: amd-pmc: Make CONFIG_AMD_PMC depend on RTC_CLASS
platform/mellanox: mlxreg-lc: fix error code in mlxreg_lc_create_static_devices()
Linus Torvalds [Thu, 18 Nov 2021 22:35:41 +0000 (14:35 -0800)]
Merge tag 'spi-fix-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few small fixes for v5.16, one in the core for an issue with
handling of controller unregistration that was introduced with the
fixes for registering nested SPI controllers and a few more minor
device specific ones"
* tag 'spi-fix-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix use-after-free of the add_lock mutex
spi: spi-geni-qcom: fix error handling in spi_geni_grab_gpi_chan()
spi: lpspi: Silence error message upon deferred probe
spi: cadence-quadspi: fix write completion support
Nick Terrell [Tue, 16 Nov 2021 23:11:39 +0000 (15:11 -0800)]
lib: zstd: Don't add -O3 to cflags
After the update to zstd-1.4.10 passing -O3 is no longer necessary to
get good performance from zstd. Using the default optimization level -O2
is sufficient to get good performance.
I've measured no significant change to compression speed, and a ~1%
decompression speed loss, which is acceptable.
This fixes the reported parisc -Wframe-larger-than=1536 errors [0]. The
gcc-8-hppa-linux-gnu compiler performed very poorly with -O3, generating
stacks that are ~3KB. With -O2 these same functions generate stacks in
the < 100B, completely fixing the problem. Function size deltas are
listed below:
Nick Terrell [Tue, 16 Nov 2021 04:33:08 +0000 (20:33 -0800)]
lib: zstd: Don't inline functions in zstd_opt.c
`zstd_opt.c` contains the match finder for the highest compression
levels. These levels are already very slow, and are unlikely to be used
in the kernel. If they are used, they shouldn't be used in latency
sensitive workloads, so slowing them down shouldn't be a big deal.
This saves 188 KB of the 288 KB regression reported by Geert Uytterhoeven [0].
I've also opened an issue upstream [1] so that we can properly tackle
the code size issue in `zstd_opt.c` for all users, and can hopefully
remove this hack in the next zstd version we import.
Nick Terrell [Tue, 16 Nov 2021 03:08:19 +0000 (19:08 -0800)]
lib: zstd: Fix unused variable warning
The variable `litLengthSum` is only used by an `assert()`, so when
asserts are disabled the compiler doesn't see any usage and warns.
This issue is already fixed upstream by PR #2838 [0]. It was reported
by the Kernel test robot in [1].
Another approach would be to change zstd's disabled `assert()`
definition to use the argument in a disabled branch, instead of
ignoring the argument. I've avoided this approach because there are
some small changes necessary to get zstd to build, and I would
want to thoroughly re-test for performance, since that is slightly
changing the code in every function in zstd. It seems like a
trivial change, but some functions are pretty sensitive to small
changes. However, I think it is a valid approach that I would
like to see upstream take, so I've opened Issue #2868 to attempt
this upstream.
Lastly, I've chosen not to use __maybe_unused because all code
in lib/zstd/ must eventually be upstreamed. Upstream zstd can't
use __maybe_unused because it isn't portable across all compilers.
- nl80211: fix getting radio statistics in survey dump
- e100: fix device suspend/resume
Previous releases - always broken:
- tcp: fix uninitialized access in skb frags array for Rx 0cp
- bpf: fix toctou on read-only map's constant scalar tracking
- bpf: forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing
progs
- tipc: only accept encrypted MSG_CRYPTO msgs
- smc: transfer remaining wait queue entries during fallback, fix
missing wake ups
- udp: validate checksum in udp_read_sock() (when sockmap is used)
- sched: act_mirred: drop dst for the direction from egress to
ingress
- virtio_net_hdr_to_skb: count transport header in UFO, prevent
allowing bad skbs into the stack
- nfc: reorder the logic in nfc_{un,}register_device, fix unregister
- ipsec: check return value of ipv6_skip_exthdr
- usb: r8152: add MAC passthrough support for more Lenovo Docks"
* tag 'net-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
ptp: ocp: Fix a couple NULL vs IS_ERR() checks
net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()
net: tulip: de4x5: fix the problem that the array 'lp->phy[8]' may be out of bound
ipv6: check return value of ipv6_skip_exthdr
e100: fix device suspend/resume
devlink: Don't throw an error if flash notification sent before devlink visible
page_pool: Revert "page_pool: disable dma mapping support..."
ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()
octeontx2-af: debugfs: don't corrupt user memory
NFC: add NCI_UNREG flag to eliminate the race
NFC: reorder the logic in nfc_{un,}register_device
NFC: reorganize the functions in nci_request
tipc: check for null after calling kmemdup
i40e: Fix display error code in dmesg
i40e: Fix creation of first queue by omitting it if is not power of two
i40e: Fix warning message and call stack during rmmod i40e driver
i40e: Fix ping is lost after configuring ADq on VF
i40e: Fix changing previously set num_queue_pairs for PFs
i40e: Fix NULL ptr dereference on VSI filter sync
i40e: Fix correct max_pkt_size on VF RX queue
...
Linus Torvalds [Thu, 18 Nov 2021 20:41:14 +0000 (12:41 -0800)]
Merge tag 'for-5.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Several xes and one old ioctl deprecation. Namely there's fix for
crashes/warnings with lzo compression that was suspected to be caused
by first pull merge resolution, but it was a different bug.
Summary:
- regression fix for a crash in lzo due to missing boundary checks of
the page array
- fix crashes on ARM64 due to missing barriers when synchronizing
status bits between work queues
- silence lockdep when reading chunk tree during mount
- fix false positive warning in integrity checker on devices with
disabled write caching
- fix signedness of bitfields in scrub
- start deprecation of balance v1 ioctl"
* tag 'for-5.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: deprecate BTRFS_IOC_BALANCE ioctl
btrfs: make 1-bit bit-fields of scrub_page unsigned int
btrfs: check-integrity: fix a warning on write caching disabled disk
btrfs: silence lockdep when reading chunk tree during mount
btrfs: fix memory ordering between normal and ordered work functions
btrfs: fix a out-of-bound access in copy_compressed_data_to_page()
Linus Torvalds [Thu, 18 Nov 2021 20:17:33 +0000 (12:17 -0800)]
Merge tag 'fs.idmapped.v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull setattr idmapping fix from Christian Brauner:
"This contains a simple fix for setattr. When determining the validity
of the attributes the ia_{g,u}id fields contain the value that will be
written to inode->i_{g,u}id. When the {g,u}id attribute of the file
isn't altered and the caller's fs{g,u}id matches the current {g,u}id
attribute the attribute change is allowed.
The value in ia_{g,u}id does already account for idmapped mounts and
will have taken the relevant idmapping into account. So in order to
verify that the {g,u}id attribute isn't changed we simple need to
compare the ia_{g,u}id value against the inode's i_{g,u}id value.
This only has any meaning for idmapped mounts as idmapping helpers are
idempotent without them. And for idmapped mounts this really only has
a meaning when circular idmappings are used, i.e. mappings where e.g.
id 1000 is mapped to id 1001 and id 1001 is mapped to id 1000. Such
ciruclar mappings can e.g. be useful when sharing the same home
directory between multiple users at the same time.
Before this patch we could end up denying legitimate attribute changes
and allowing invalid attribute changes when circular mappings are
used. To even get into this situation the caller must've been
privileged both to create that mapping and to create that idmapped
mount.
This hasn't been seen in the wild anywhere but came up when expanding
the fstest suite during work on a series of hardening patches. All
idmapped fstests pass without any regressions and we're adding new
tests to verify the behavior of circular mappings.
Linus Torvalds [Thu, 18 Nov 2021 20:13:24 +0000 (12:13 -0800)]
Merge tag 'for-5.16/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
"parisc bug and warning fixes and wire up futex_waitv.
Fix some warnings which showed up with allmodconfig builds, a revert
of a change to the sigreturn trampoline which broke signal handling,
wire up futex_waitv and add CONFIG_PRINTK_TIME=y to 32bit defconfig"
* tag 'for-5.16/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Enable CONFIG_PRINTK_TIME=y in 32bit defconfig
Revert "parisc: Reduce sigreturn trampoline to 3 instructions"
parisc: Wrap assembler related defines inside __ASSEMBLY__
parisc: Wire up futex_waitv
parisc: Include stringify.h to avoid build error in crypto/api.c
parisc/sticon: fix reverse colors
Linus Torvalds [Thu, 18 Nov 2021 20:05:22 +0000 (12:05 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Selftest changes:
- Cleanups for the perf test infrastructure and mapping hugepages
- Avoid contention on mmap_sem when the guests start to run
- Add event channel upcall support to xen_shinfo_test
x86 changes:
- Fixes for Xen emulation
- Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
- Fixes for migration of 32-bit nested guests on 64-bit hypervisor
- Compilation fixes
- More SEV cleanups
Generic:
- Cap the return value of KVM_CAP_NR_VCPUS to both KVM_CAP_MAX_VCPUS
and num_online_cpus(). Most architectures were only using one of
the two"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (42 commits)
KVM: x86: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: s390: Cap KVM_CAP_NR_VCPUS by num_online_cpus()
KVM: RISC-V: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: PPC: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: MIPS: Cap KVM_CAP_NR_VCPUS by KVM_CAP_MAX_VCPUS
KVM: arm64: Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus()
KVM: x86: Assume a 64-bit hypercall for guests with protected state
selftests: KVM: Add /x86_64/sev_migrate_tests to .gitignore
riscv: kvm: fix non-kernel-doc comment block
KVM: SEV: Fix typo in and tweak name of cmd_allowed_from_miror()
KVM: SEV: Drop a redundant setting of sev->asid during initialization
KVM: SEV: WARN if SEV-ES is marked active but SEV is not
KVM: SEV: Set sev_info.active after initial checks in sev_guest_init()
KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs
KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache
KVM: nVMX: Use a gfn_to_hva_cache for vmptrld
KVM: nVMX: Use kvm_read_guest_offset_cached() for nested VMCS check
KVM: x86/xen: Use sizeof_field() instead of open-coding it
KVM: nVMX: Use kvm_{read,write}_guest_cached() for shadow_vmcs12
KVM: x86/xen: Fix get_attr of KVM_XEN_ATTR_TYPE_SHARED_INFO
...
Linus Torvalds [Thu, 18 Nov 2021 19:01:06 +0000 (11:01 -0800)]
Merge tag 'docs-5.16-2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A handful of documentation fixes for 5.16"
* tag 'docs-5.16-2' of git://git.lwn.net/linux:
Documentation/process: fix a cross reference
Documentation: update vcpu-requests.rst reference
docs: accounting: update delay-accounting.rst reference
libbpf: update index.rst reference
docs: filesystems: Fix grammatical error "with" to "which"
doc/zh_CN: fix a translation error in management-style
docs: ftrace: fix the wrong path of tracefs
Documentation: arm: marvell: Fix link to armada_1000_pb.pdf document
Documentation: arm: marvell: Put Armada XP section between Armada 370 and 375
Documentation: arm: marvell: Add some links to homepage / product infos
docs: Update Sphinx requirements
Kalesh Singh [Thu, 18 Nov 2021 01:15:42 +0000 (17:15 -0800)]
tracing/histogram: Fix UAF in destroy_hist_field()
Calling destroy_hist_field() on an expression will recursively free
any operands associated with the expression. If during expression
parsing the operands of the expression are already set when an error
is encountered, there is no need to explicity free the operands. Doing
so will result in destroy_hist_field() being called twice for the
operands and lead to a use-after-free (UAF) error.
If the operands are associated with the expression, only call
destroy_hist_field() on the expression since the operands will be
recursively freed.
Linus Torvalds [Thu, 18 Nov 2021 18:50:45 +0000 (10:50 -0800)]
Merge tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fixes from Petr Mladek:
- Try to flush backtraces from other CPUs also on the local one. This
was a regression caused by printk_safe buffers removal.
- Remove header dependency warning.
* tag 'printk-for-5.16-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: Remove printk.h inclusion in percpu.h
printk: restore flushing of NMI buffers on remote CPUs after NMI backtraces
Heiko Carstens [Mon, 15 Nov 2021 19:56:14 +0000 (20:56 +0100)]
ftrace/samples: add s390 support for ftrace direct multi sample
Add s390 architecture support for the ftrace direct multi sample.
See commit 7b3e3a4a7378 ("ftrace/samples: Add multi direct interface
test module") for further details.
Heiko Carstens [Mon, 15 Nov 2021 19:56:13 +0000 (20:56 +0100)]
ftrace/samples: add missing Kconfig option for ftrace direct multi sample
Currently it is not possible to build the ftrace direct multi example
anymore due to broken config dependencies. Fix this by adding
SAMPLE_FTRACE_DIRECT_MULTI config option.
This broke when merging s390-5.16-1 due to an incorrect merge conflict
resolution proposed by me.
Also rename SAMPLE_FTRACE_MULTI_DIRECT to SAMPLE_FTRACE_DIRECT_MULTI
so it matches the module name.
Fixes: 3f9437b5c069 ("Merge tag 's390-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux") Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20211115195614.3173346-2-hca@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Heiko Carstens [Tue, 16 Nov 2021 10:06:38 +0000 (11:06 +0100)]
s390/kexec: fix return code handling
kexec_file_add_ipl_report ignores that ipl_report_finish may fail and
can return an error pointer instead of a valid pointer.
Fix this and simplify by returning NULL in case of an error and let
the only caller handle this case.
Fixes: c523d4744083 ("s390/kexec_file: Create ipl report and pass to next kernel") Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
s390/dump: fix copying to user-space of swapped kdump oldmem
This commit fixes a bug introduced by commit a3e65250f3ab ("s390/dump:
introduce boot data 'oldmem_data'").
OLDMEM_BASE was mistakenly replaced by oldmem_data.size instead of
oldmem_data.start.
This bug caused the following error during kdump:
kdump.sh[878]: No program header covering vaddr 0x3434f5245found kexec bug?
Fixes: a3e65250f3ab ("s390/dump: introduce boot data 'oldmem_data'") Cc: stable@vger.kernel.org # 5.15+ Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Ian Rogers [Thu, 18 Nov 2021 08:47:49 +0000 (00:47 -0800)]
perf evsel: Fix memory leaks relating to unit
unit may have a strdup pointer or be to a literal, consequently memory
assocciated with it isn't freed. Change it so the unit is always strdup
and so the memory can be safely freed.
Fix related issue in perf_event__process_event_update() for name and
own_cpus. Leaks were spotted by leak sanitizer.
Signed-off-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20211118084749.2191447-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
tools build: Fix removal of feature-sync-compare-and-swap feature detection
The patch removing the feature-sync-compare-and-swap feature detection
didn't remove the call to main_test_sync_compare_and_swap(), making the
'test-all' case fail an all the feature tests to be performed
individually:
$ cat /tmp/build/perf/feature/test-all.make.output
In file included from test-all.c:18:
test-libpython-version.c:5:10: error: #error
5 | #error
| ^~~~~
test-all.c: In function ‘main’:
test-all.c:203:9: error: implicit declaration of function ‘main_test_sync_compare_and_swap’ [-Werror=implicit-function-declaration]
203 | main_test_sync_compare_and_swap(argc, argv);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
$
Fix it, now to figure out what is that test-libpython-version.c
problem...
Fixes: 254f070c2d46db6a ("tools: Remove feature-sync-compare-and-swap feature detection") Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/YZU9Fe0sgkHSXeC2@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Fri, 5 Nov 2021 10:41:30 +0000 (10:41 +0000)]
perf inject: Fix ARM SPE handling
'perf inject' is currently not working for Arm SPE. When you try to run
'perf inject' and 'perf report' with a perf.data file that contains SPE
traces, the tool reports a "Bad address" error:
0x42c00 [0x8]: failed to process type: 9 [Bad address]
Error:
failed to process sample
As far as I know, the issue was first spotted in [1], but 'perf inject'
was not yet injecting the samples. This patch does something similar to
what cs_etm does for injecting the samples [2], but for SPE.
Reviewed-by: James Clark <james.clark@arm.com> Signed-off-by: German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211105104130.28186-2-german.gomez@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sohaib Mohamed [Wed, 10 Nov 2021 02:20:11 +0000 (04:20 +0200)]
perf bench: Fix two memory leaks detected with ASan
ASan reports memory leaks while running:
$ perf bench sched all
Fixes: 3a86770316bc6b03 ("perf bench: Add sched-messaging.c: Benchmark for scheduler and IPC mechanisms based on hackbench") Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com> Acked-by: Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hitoshi Mitake <h.mitake@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Russel <rusty@rustcorp.com.au> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pierre Gondois <pierre.gondois@arm.com> Link: http://lore.kernel.org/lkml/20211110022012.16620-1-sohaib.amhmd@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Richter [Wed, 17 Nov 2021 08:26:09 +0000 (09:26 +0100)]
perf test sample-parsing: Fix branch_stack entry endianness check
Commit 884933ec8bacb2a2 ("perf test sample-parsing: Add endian test for
struct branch_flags") broke the test case 27 (Sample parsing) on s390 on
linux-next tree:
# perf test -Fv 27
27: Sample parsing
--- start ---
parsing failed for sample_type 0x800
---- end ----
Sample parsing: FAILED!
#
The cause of the failure is a wrong #define BS_EXPECTED_BE statement in
above commit. Correct this define and the test case runs fine.
Output After:
# perf test -Fv 27
27: Sample parsing :
--- start ---
---- end ----
Sample parsing: Ok
#
Fixes: 884933ec8bacb2 ("perf test sample-parsing: Add endian test for struct branch_flags") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Tested-by: Madhavan Srinivasan <maddy@linux.ibm.com> Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com> CC: Sven Schnelle <svens@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: https://lore.kernel.org/r/54077e81-503e-3405-6cb0-6541eb5532cc@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
To pick the changes in:
217e5e0c9261896f ("KVM: x86: Expose TSC offset controls to userspace")
That just rebuilds kvm-stat.c on x86, no change in functionality.
This silences these perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Oliver Upton <oupton@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 5 Nov 2021 22:56:17 +0000 (15:56 -0700)]
perf sort: Fix the 'p_stage_cyc' sort key behavior
andle 'p_stage_cyc' (for pipeline stage cycles) sort key with the same
rationale as for the 'weight' and 'local_weight', see the fix in this
series for a full explanation.
Not sure it also needs the local and global variants.
But I couldn't test it actually because I don't have the machine.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211105225617.151364-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 5 Nov 2021 22:56:16 +0000 (15:56 -0700)]
perf sort: Fix the 'ins_lat' sort key behavior
Handle 'ins_lat' (for instruction latency) and 'local_ins_lat' sort keys
with the same rationale as for the 'weight' and 'local_weight', see the
previous fix in this series for a full explanation.
But I couldn't test it actually, so only build tested.
Reviewed-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20211105225617.151364-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 5 Nov 2021 22:56:15 +0000 (15:56 -0700)]
perf sort: Fix the 'weight' sort key behavior
Currently, the 'weight' field in the perf sample has latency information
for some instructions like in memory accesses. And perf tool has 'weight'
and 'local_weight' sort keys to display the info.
But it's somewhat confusing what it shows exactly. In my understanding,
'local_weight' shows a weight in a single sample, and (global) 'weight'
shows a sum of the weights in the hist_entry.
For example:
$ perf mem record -t load dd if=/dev/zero of=/dev/null bs=4k count=1M
So let's look at the 'lockref_get_not_zero' symbols. The top entry
shows that 313 samples were captured with 'local_weight' 32, so the
total weight should be 313 x 32 = 10016. But it's not the case:
With the 'weight' sort key, it's divided to 4 samples even with the same
info ('comm', 'dso', 'sym' and 'local_weight'). I don't think this is
what we want.
I found this because of the way it aggregates the 'weight' value. Since
it's not a period, we should not add them in the he->stat. Otherwise,
two 32 'weight' entries will create a 64 'weight' entry.
After that, new 32 'weight' samples don't have a matching entry so it'd
create a new entry and make it a 64 'weight' entry again and again.
Later, they will be merged into 128 'weight' entries during the
hists__collapse_resort() with 4 samples, multiple times like above.
Let's keep the weight and display it differently. For 'local_weight',
it can show the weight as is, and for (global) 'weight' it can display
the number multiplied by the number of samples.
perf tools: Set COMPAT_NEED_REALLOCARRAY for CONFIG_AUXTRACE=1
As it is being used in tools/perf/arch/arm64/util/arm-spe.c and the
COMPAT_NEED_REALLOCARRAY was only being set when CORESIGHT=1 is set.
Fixes: a7c5f03380849069 ("perf arm-spe: Implement find_snapshot callback") Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: German Gomez <german.gomez@arm.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/all/YZT63mIc7iY01er3@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tests/wp.c:24:12: error: 'wp_read' defined but not used [-Werror=unused-function]
static int wp_read(int fd, long long *count, int size)
^
tests/wp.c:35:13: error: 'get__perf_event_attr' defined but not used [-Werror=unused-function]
static void get__perf_event_attr(struct perf_event_attr *attr, int wp_type,
^
CC /tmp/build/perf/util/print_binary.o
Fixes: 40229689795e0f9c ("perf test: Convert watch point tests to test cases.") Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: Daniel Latypov <dlatypov@google.com> Cc: David Gow <davidgow@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Clarke <pc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com> Cc: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in:
1167986334b9e938 ("KVM: SEV: Add support for SEV intra host migration") b228dd6a927dcc54 ("KVM: x86: On emulation failure, convey the exit reason, etc. to userspace") ec653cd1c4da3b74 ("KVM: x86: Clarify the kvm_run.emulation_failure structure layout") 5b12ee4f741c9ada ("KVM: x86: Report host tsc and realtime values in KVM_GET_CLOCK") 073026e601ac2f6b ("RISC-V: KVM: Add SBI v0.1 support")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Anup Patel <anup@brainfault.org> Cc: Atish Patra <atish.patra@wdc.com> Cc: David Edmondson <david.edmondson@oracle.com> Cc: Oliver Upton <oupton@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Gonda <pgonda@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
tools headers cpufeatures: Sync with the kernel sources
To pick the changes from:
afafd4fdb4f1d378 ("x86/fpu/amx: Define AMX state components and have it used for boot-time checks")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Borislav Petkov <bp@suse.de> Cc: Chang S. Bae <chang.seok.bae@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dan Carpenter [Thu, 18 Nov 2021 11:22:11 +0000 (14:22 +0300)]
ptp: ocp: Fix a couple NULL vs IS_ERR() checks
The ptp_ocp_get_mem() function does not return NULL, it returns error
pointers.
Fixes: a964dcf3f0ae ("ptp: ocp: Expose various resources on the timecard.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Teng Qi [Thu, 18 Nov 2021 07:01:18 +0000 (15:01 +0800)]
net: ethernet: dec: tulip: de4x5: fix possible array overflows in type3_infoblock()
The definition of macro MOTO_SROM_BUG is:
#define MOTO_SROM_BUG (lp->active == 8 && (get_unaligned_le32(
dev->dev_addr) & 0x00ffffff) == 0x3e0008)
and the if statement
if (MOTO_SROM_BUG) lp->active = 0;
using this macro indicates lp->active could be 8. If lp->active is 8 and
the second comparison of this macro is false. lp->active will remain 8 in:
lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1);
lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1);
lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2;
lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2;
lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2;
lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2;
lp->phy[lp->active].mci = *p;
However, the length of array lp->phy is 8, so array overflows can occur.
To fix these possible array overflows, we first check lp->active and then
return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8).
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Teng Qi <starmiku1207184332@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 18 Nov 2021 11:48:33 +0000 (11:48 +0000)]
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-
queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-11-17
This series contains updates to i40e driver only.
Eryk adds accounting for VLAN header in packet size when VF port VLAN is
configured. He also fixes TC queue distribution when the user has changed
queue counts as well as for configuration of VF ADQ which caused dropped
packets.
Michal adds tracking for when a VSI is being released to prevent null
pointer dereference when managing filters.
Karen ensures PF successfully initiates VF requested reset which could
cause a call trace otherwise.
Jedrzej moves validation of channel queue value earlier to prevent
partial configuration when the value is invalid.
Grzegorz corrects the reported error when adding filter fails.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jordy Zomer [Wed, 17 Nov 2021 19:06:48 +0000 (20:06 +0100)]
ipv6: check return value of ipv6_skip_exthdr
The offset value is used in pointer math on skb->data.
Since ipv6_skip_exthdr may return -1 the pointer to uh and th
may not point to the actual udp and tcp headers and potentially
overwrite other stuff. This is why I think this should be checked.
EDIT: added {}'s, thanks Kees
Signed-off-by: Jordy Zomer <jordy@pwning.systems> Signed-off-by: David S. Miller <davem@davemloft.net>
Jesse Brandeburg [Wed, 17 Nov 2021 20:59:52 +0000 (12:59 -0800)]
e100: fix device suspend/resume
As reported in [1], e100 was no longer working for suspend/resume
cycles. The previous commit mentioned in the fixes appears to have
broken things and this attempts to practice best known methods for
device power management and keep wake-up working while allowing
suspend/resume to work. To do this, I reorder a little bit of code
and fix the resume path to make sure the device is enabled.
Leon Romanovsky [Wed, 17 Nov 2021 14:49:09 +0000 (16:49 +0200)]
devlink: Don't throw an error if flash notification sent before devlink visible
The mlxsw driver calls to various devlink flash routines even before
users can get any access to the devlink instance itself. For example,
mlxsw_core_fw_rev_validate() one of such functions.
It causes to the WARN_ON to trigger warning about devlink not registered.
Fixes: 22bb49dfd49d ("devlink: Notify users when objects are accessible") Reported-by: Danielle Ratson <danieller@nvidia.com> Tested-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
As reported by Guillaume in [1]:
Enabling LPAE always enables CONFIG_ARCH_DMA_ADDR_T_64BIT
in 32-bit systems, which breaks the bootup proceess when a
ethernet driver is using page pool with PP_FLAG_DMA_MAP flag.
As we were hoping we had no active consumers for such system
when we removed the dma mapping support, and LPAE seems like
a common feature for 32 bits system, so revert it.
Teng Qi [Wed, 17 Nov 2021 03:44:53 +0000 (11:44 +0800)]
ethernet: hisilicon: hns: hns_dsaf_misc: fix a possible array overflow in hns_dsaf_ge_srst_by_port()
The if statement:
if (port >= DSAF_GE_NUM)
return;
limits the value of port less than DSAF_GE_NUM (i.e., 8).
However, if the value of port is 6 or 7, an array overflow could occur:
port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off;
because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6).
To fix this possible array overflow, we first check port and if it is
greater than or equal to DSAF_MAX_PORT_NUM, the function returns.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Teng Qi <starmiku1207184332@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Helge Deller [Tue, 16 Nov 2021 12:12:21 +0000 (13:12 +0100)]
parisc: Wrap assembler related defines inside __ASSEMBLY__
Building allmodconfig shows errors in the gpu/drm/msm snapdragon drivers,
because a COND() define is used there which conflicts with the COND() for
PA-RISC assembly. Although the snapdragon driver isn't relevant for parisc, it
is nevertheless compiled when CONFIG_COMPILE_TEST is defined.
Move the COND() define and other PA-RISC mnemonics inside the #ifdef
__ASSEMBLY__ part to avoid this conflict.
Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: kernel test robot <lkp@intel.com>
Helge Deller [Mon, 15 Nov 2021 16:34:50 +0000 (17:34 +0100)]
parisc: Include stringify.h to avoid build error in crypto/api.c
Include stringify.h to avoid this build error:
arch/parisc/include/asm/jump_label.h: error: expected ':' before '__stringify'
arch/parisc/include/asm/jump_label.h: error: label 'l_yes' defined but not used [-Werror=unused-label]
Signed-off-by: Helge Deller <deller@gmx.de> Reported-by: kernel test robot <lkp@intel.com>
Vitaly Kuznetsov [Tue, 16 Nov 2021 16:34:42 +0000 (17:34 +0100)]
KVM: s390: Cap KVM_CAP_NR_VCPUS by num_online_cpus()
KVM_CAP_NR_VCPUS is a legacy advisory value which on other architectures
return num_online_cpus() caped by KVM_CAP_NR_VCPUS or something else
(ppc and arm64 are special cases). On s390, KVM_CAP_NR_VCPUS returns
the same as KVM_CAP_MAX_VCPUS and this may turn out to be a bad
'advice'. Switch s390 to returning caped num_online_cpus() too.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Message-Id: <20211116163443.88707-6-vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Vitaly Kuznetsov [Tue, 16 Nov 2021 16:34:38 +0000 (17:34 +0100)]
KVM: arm64: Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus()
Generally, it doesn't make sense to return the recommended maximum number
of vCPUs which exceeds the maximum possible number of vCPUs.
Note: ARM64 is special as the value returned by KVM_CAP_MAX_VCPUS differs
depending on whether it is a system-wide ioctl or a per-VM one. Previously,
KVM_CAP_NR_VCPUS didn't have this difference and it seems preferable to
keep the status quo. Cap KVM_CAP_NR_VCPUS by kvm_arm_default_max_vcpus()
which is what gets returned by system-wide KVM_CAP_MAX_VCPUS.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211116163443.88707-2-vkuznets@redhat.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tom Lendacky [Mon, 24 May 2021 17:48:57 +0000 (12:48 -0500)]
KVM: x86: Assume a 64-bit hypercall for guests with protected state
When processing a hypercall for a guest with protected state, currently
SEV-ES guests, the guest CS segment register can't be checked to
determine if the guest is in 64-bit mode. For an SEV-ES guest, it is
expected that communication between the guest and the hypervisor is
performed to shared memory using the GHCB. In order to use the GHCB, the
guest must have been in long mode, otherwise writes by the guest to the
GHCB would be encrypted and not be able to be comprehended by the
hypervisor.
Create a new helper function, is_64_bit_hypercall(), that assumes the
guest is in 64-bit mode when the guest has protected state, and returns
true, otherwise invoking is_64_bit_mode() to determine the mode. Update
the hypercall related routines to use is_64_bit_hypercall() instead of
is_64_bit_mode().
Add a WARN_ON_ONCE() to is_64_bit_mode() to catch occurences of calls to
this helper function for a guest running with protected state.
Fixes: ec010ce9a72d ("KVM: SVM: Add required changes to support intercepts under SEV-ES") Reported-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <e0b20c770c9d0d1403f23d83e785385104211f74.1621878537.git.thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Randy Dunlap [Sun, 7 Nov 2021 03:47:06 +0000 (20:47 -0700)]
riscv: kvm: fix non-kernel-doc comment block
Don't use "/**" to begin a comment block for a non-kernel-doc comment.
Prevents this docs build warning:
vcpu_sbi.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Copyright (c) 2019 Western Digital Corporation or its affiliates.
Fixes: 073026e601ac ("RISC-V: KVM: Add SBI v0.1 support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Atish Patra <atish.patra@wdc.com> Cc: Anup Patel <anup.patel@wdc.com> Cc: kvm@vger.kernel.org Cc: kvm-riscv@lists.infradead.org Cc: linux-riscv@lists.infradead.org Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu>
Message-Id: <20211107034706.30672-1-rdunlap@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SEV: Fix typo in and tweak name of cmd_allowed_from_miror()
Rename cmd_allowed_from_miror() to is_cmd_allowed_from_mirror(), fixing
a typo and making it obvious that the result is a boolean where
false means "not allowed".
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SEV: Drop a redundant setting of sev->asid during initialization
Remove a fully redundant write to sev->asid during SEV/SEV-ES guest
initialization. The ASID is set a few lines earlier prior to the call to
sev_platform_init(), which doesn't take "sev" as a param, i.e. can't
muck with the ASID barring some truly magical behind-the-scenes code.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-6-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SEV: WARN if SEV-ES is marked active but SEV is not
WARN if the VM is tagged as SEV-ES but not SEV. KVM relies on SEV and
SEV-ES being set atomically, and guards common flows with "is SEV", i.e.
observing SEV-ES without SEV means KVM has a fatal bug.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SEV: Set sev_info.active after initial checks in sev_guest_init()
Set sev_info.active during SEV/SEV-ES activation before calling any code
that can potentially consume sev_info.es_active, e.g. set "active" and
"es_active" as a pair immediately after the initial sanity checks. KVM
generally expects that es_active can be true if and only if active is
true, e.g. sev_asid_new() deliberately avoids sev_es_guest() so that it
doesn't get a false negative. This will allow WARNing in sev_es_guest()
if the VM is tagged as SEV-ES but not SEV.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: SEV: Disallow COPY_ENC_CONTEXT_FROM if target has created vCPUs
Reject COPY_ENC_CONTEXT_FROM if the destination VM has created vCPUs.
KVM relies on SEV activation to occur before vCPUs are created, e.g. to
set VMCB flags and intercepts correctly.
Fixes: 902f83bac915 ("KVM: x86: Support KVM VMs sharing SEV context") Cc: stable@vger.kernel.org Cc: Peter Gonda <pgonda@google.com> Cc: Marc Orr <marcorr@google.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Nathan Tempelman <natet@google.com> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211109215101.2211373-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Woodhouse [Mon, 15 Nov 2021 16:50:27 +0000 (16:50 +0000)]
KVM: Kill kvm_map_gfn() / kvm_unmap_gfn() and gfn_to_pfn_cache
In commit 81f4987cf59a ("KVM: x86: Fix recording of guest steal time /
preempted status") I removed the only user of these functions because
it was basically impossible to use them safely.
There are two stages to the GFN->PFN mapping; first through the KVM
memslots to a userspace HVA and then through the page tables to
translate that HVA to an underlying PFN. Invalidations of the former
were being handled correctly, but no attempt was made to use the MMU
notifiers to invalidate the cache when the HVA->GFN mapping changed.
As a prelude to reinventing the gfn_to_pfn_cache with more usable
semantics, rip it out entirely and untangle the implementation of
the unsafe kvm_vcpu_map()/kvm_vcpu_unmap() functions from it.
All current users of kvm_vcpu_map() also look broken right now, and
will be dealt with separately. They broadly fall into two classes:
* Those which map, access the data and immediately unmap. This is
mostly gratuitous and could just as well use the existing user
HVA, and could probably benefit from a gfn_to_hva_cache as they
do so.
* Those which keep the mapping around for a longer time, perhaps
even using the PFN directly from the guest. These will need to
be converted to the new gfn_to_pfn_cache and then kvm_vcpu_map()
can be removed too.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-8-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
David Woodhouse [Mon, 15 Nov 2021 16:50:26 +0000 (16:50 +0000)]
KVM: nVMX: Use a gfn_to_hva_cache for vmptrld
And thus another call to kvm_vcpu_map() can die.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-7-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
projects / kernel.git / log