From: Marek Vasut Date: Mon, 6 Mar 2023 14:53:51 +0000 (+0100) Subject: net: fec_mxc: Add board_interface_eth_init() for i.MX8M Mini/Nano/Plus X-Git-Tag: baikal/mips/sdk6.2~4^2~3^2~175^2~16^2~7 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=fc74bef8ec3c6d43ff6f3baa5e4c179adeb8409a;p=uboot.git net: fec_mxc: Add board_interface_eth_init() for i.MX8M Mini/Nano/Plus Implement common board_interface_eth_init() and call it from the FEC driver to configure IOMUXC GPR[1] register according to the PHY mode obtained from DT. This supports all three interface modes supported by the i.MX8M Mini/Nano/Plus FEC and supersedes the current board-side configuration of the same IOMUX GPR[1] duplicated in the board files. Signed-off-by: Marek Vasut --- diff --git a/arch/arm/include/asm/arch-imx8m/imx-regs.h b/arch/arm/include/asm/arch-imx8m/imx-regs.h index 1818b459fa..6e2fc82a0e 100644 --- a/arch/arm/include/asm/arch-imx8m/imx-regs.h +++ b/arch/arm/include/asm/arch-imx8m/imx-regs.h @@ -89,6 +89,7 @@ #define DDRC_IPS_BASE_ADDR(X) (0x3d400000 + ((X) * 0x2000000)) #define DDR_CSD1_BASE_ADDR 0x40000000 +#define IOMUXC_GPR_GPR1_GPR_ENET1_RGMII_EN BIT(22) #define IOMUXC_GPR_GPR1_GPR_ENET_QOS_RGMII_EN BIT(21) #define IOMUXC_GPR_GPR1_GPR_ENET_QOS_CLK_TX_CLK_SEL BIT(20) #define IOMUXC_GPR_GPR1_GPR_ENET_QOS_CLK_GEN_EN BIT(19) @@ -96,6 +97,7 @@ #define IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MII (0 << 16) #define IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_RGMII (1 << 16) #define IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_RMII (4 << 16) +#define IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL BIT(13) #define FEC_QUIRK_ENET_MAC #ifdef CONFIG_ARMV8_PSCI /* Final jump location */ diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c index 1546c9ba9a..32f8623f23 100644 --- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c +++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c @@ -968,10 +968,56 @@ int set_clk_enet(enum enet_freq type) return 0; } + +static int imx8mp_fec_interface_init(struct udevice *dev, + phy_interface_t interface_type, + bool mx8mp) +{ + /* i.MX8MP has extra RGMII_EN bit in IOMUXC GPR1 register */ + const u32 rgmii_en = mx8mp ? IOMUXC_GPR_GPR1_GPR_ENET1_RGMII_EN : 0; + struct iomuxc_gpr_base_regs *gpr = + (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; + + clrbits_le32(&gpr->gpr[1], + rgmii_en | + IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL); + + switch (interface_type) { + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_RMII: + setbits_le32(&gpr->gpr[1], IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL); + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + setbits_le32(&gpr->gpr[1], rgmii_en); + break; + default: + return -EINVAL; + } + + return 0; +} #endif int board_interface_eth_init(struct udevice *dev, phy_interface_t interface_type) { + if (IS_ENABLED(CONFIG_IMX8MM) && + IS_ENABLED(CONFIG_FEC_MXC) && + device_is_compatible(dev, "fsl,imx8mm-fec")) + return imx8mp_fec_interface_init(dev, interface_type, false); + + if (IS_ENABLED(CONFIG_IMX8MN) && + IS_ENABLED(CONFIG_FEC_MXC) && + device_is_compatible(dev, "fsl,imx8mn-fec")) + return imx8mp_fec_interface_init(dev, interface_type, false); + + if (IS_ENABLED(CONFIG_IMX8MP) && + IS_ENABLED(CONFIG_FEC_MXC) && + device_is_compatible(dev, "fsl,imx8mp-fec")) + return imx8mp_fec_interface_init(dev, interface_type, true); + if (IS_ENABLED(CONFIG_IMX8MP) && IS_ENABLED(CONFIG_DWC_ETH_QOS) && device_is_compatible(dev, "nxp,imx8mp-dwmac-eqos")) diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 7a8577158a..ac937676f9 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -1232,6 +1232,10 @@ static int fecmxc_probe(struct udevice *dev) uint32_t start; int ret; + ret = board_interface_eth_init(dev, pdata->phy_interface); + if (ret) + return ret; + if (IS_ENABLED(CONFIG_IMX_MODULE_FUSE)) { if (enet_fused((ulong)priv->eth)) { printf("SoC fuse indicates Ethernet@0x%lx is unavailable.\n", (ulong)priv->eth);