From: Uwe Kleine-König Date: Mon, 4 Jul 2022 08:51:19 +0000 (+0200) Subject: serial: 8250_fsl: Don't report FE, PE and OE twice X-Git-Tag: baikal/mips/sdk6.1~5078^2~37 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=f92ddcdd43e969638752b2278bfd24085a70b311;p=kernel.git serial: 8250_fsl: Don't report FE, PE and OE twice Some Freescale 8250 implementations have the problem that a single long break results in one irq per character frame time. The code in fsl8250_handle_irq() that is supposed to handle that uses the BI bit in lsr_saved_flags to detect such a situation and then skip the second received character. However it also stores other error bits and so after a single frame error the character received in the next irq handling is passed to the upper layer with a frame error, too. So after a spike on the data line (which is correctly recognized as a frame error) the following valid character is thrown away, because the driver reports a frame error for that one, too. To weaken this problem restrict saving LSR to only the BI bit. Note however that the handling is still broken: - lsr_saved_flags is updated using orig_lsr which is the LSR content for the first received char, but there might be more in the FIFO, so a character is thrown away that is received later and not necessarily the one following the break. - The doubled break might be the 2nd and 3rd char in the FIFO, so the workaround doesn't catch these, because serial8250_rx_chars() doesn't handle the workaround. - lsr_saved_flags might have set UART_LSR_BI at the entry of fsl8250_handle_irq() which doesn't originate from fsl8250_handle_irq()'s "up->lsr_saved_flags |= orig_lsr & UART_LSR_BI;" but from e.g. from serial8250_tx_empty(). - For a long or a short break this isn't about two characters, but more or only a single one. Fixes: ba6ad9fd7ff8 ("serial: add irq handler for Freescale 16550 errata.") Acked-by: Ilpo Järvinen Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20220704085119.55900-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c index fd4005fcd0d62..8aad15622a2e5 100644 --- a/drivers/tty/serial/8250/8250_fsl.c +++ b/drivers/tty/serial/8250/8250_fsl.c @@ -77,7 +77,7 @@ int fsl8250_handle_irq(struct uart_port *port) if ((lsr & UART_LSR_THRE) && (up->ier & UART_IER_THRI)) serial8250_tx_chars(up); - up->lsr_saved_flags = orig_lsr; + up->lsr_saved_flags |= orig_lsr & UART_LSR_BI; uart_unlock_and_check_sysrq_irqrestore(&up->port, flags);