From: Stefan Roese Date: Thu, 7 Jan 2016 13:12:04 +0000 (+0100) Subject: arm: mvebu: Add runtime detection of UART (xmodem) boot-mode X-Git-Tag: baikal/mips/sdk5.9~8705^2~11 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=f4db6c976cf8f414c555ccbd355de787b2706be3;p=uboot.git arm: mvebu: Add runtime detection of UART (xmodem) boot-mode This patch adds runtime detection of the Marvell UART boot-mode (xmodem protocol). If this boot-mode is detected, SPL will return to the BootROM to continue the UART booting. With this patch its now possible, to generate a U-Boot image that can be booted either from the strapped boot-device (e.g. SPI NOR, MMC, etc) or via the xmodem protocol from the UART. In the UART case, the kwboot tool will dynamically insert the UART boot-device type into the image. And also patch the load address in the header, so that the mkimage header will be skipped (as its not expected by the Marvell BootROM). This simplifies the development for Armada XP / 38x based boards. As no special images need to be generated by selecting the MVEBU_BOOTROM_UARTBOOT Kconfig option. Since the Kconfig option MVEBU_BOOTROM_UARTBOOT is not needed any more, its now completely removed. Signed-off-by: Stefan Roese Cc: Luka Perkov Cc: Dirk Eibach Cc: Phil Sutter Cc: Kevin Smith --- diff --git a/Makefile b/Makefile index 100de92eab..5882c30771 100644 --- a/Makefile +++ b/Makefile @@ -915,18 +915,8 @@ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE $(call if_changed,mkimage) -# If the kwboot xmodem protocol is used, to boot U-Boot on the MVEBU -# SoC's, the SPL U-Boot returns to the BootROM after it completes -# the SDRAM setup. The BootROM expects no U-Boot header in the main -# U-Boot image. So we need to combine SPL and u-boot.bin instead of -# u-boot.img in this case. -ifdef CONFIG_MVEBU_BOOTROM_UARTBOOT -u-boot-spl.kwb: u-boot-dtb.bin spl/u-boot-spl.bin FORCE - $(call if_changed,mkimage) -else u-boot-spl.kwb: u-boot-dtb.img spl/u-boot-spl.bin FORCE $(call if_changed,mkimage) -endif MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img) diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index d96b2ae540..a15c4b7669 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -48,14 +48,4 @@ config SYS_VENDOR config SYS_SOC default "mvebu" -config MVEBU_BOOTROM_UARTBOOT - bool "Use kwboot to boot via BootROM xmodem protocol" - help - This option provides support for booting via the Marvell - xmodem protocol, used by the kwboot tool. - - Please don't forget to configure the boot device in - the board specific kwbimage.cfg file this way: - BOOT_FROM uart - endif diff --git a/arch/arm/mach-mvebu/include/mach/soc.h b/arch/arm/mach-mvebu/include/mach/soc.h index e27a36db1c..c696fc6cec 100644 --- a/arch/arm/mach-mvebu/include/mach/soc.h +++ b/arch/arm/mach-mvebu/include/mach/soc.h @@ -96,6 +96,12 @@ #define MVCPU_WIN_ENABLE CPU_WIN_ENABLE #define MVCPU_WIN_DISABLE CPU_WIN_DISABLE +/* BootROM error register (also includes some status infos) */ +#define CONFIG_BOOTROM_ERR_REG (MVEBU_REGISTER(0x182d0)) +#define BOOTROM_ERR_MODE_OFFS 28 +#define BOOTROM_ERR_MODE_MASK (0xf << BOOTROM_ERR_MODE_OFFS) +#define BOOTROM_ERR_MODE_UART 0x6 + #if defined(CONFIG_ARMADA_38X) /* SAR values for Armada 38x */ #define CONFIG_SAR_REG (MVEBU_REGISTER(0x18600)) @@ -106,7 +112,7 @@ #define SAR_BOOT_DEVICE_MASK (0x1f << SAR_BOOT_DEVICE_OFFS) #define BOOT_DEV_SEL_OFFS 4 -#define BOOT_DEV_SEL_MASK (0x1f << BOOT_DEV_SEL_OFFS) +#define BOOT_DEV_SEL_MASK (0x3f << BOOT_DEV_SEL_OFFS) #define BOOT_FROM_UART 0x28 #define BOOT_FROM_SPI 0x32 diff --git a/arch/arm/mach-mvebu/lowlevel_spl.S b/arch/arm/mach-mvebu/lowlevel_spl.S index 2e2181ecea..49e0b906d5 100644 --- a/arch/arm/mach-mvebu/lowlevel_spl.S +++ b/arch/arm/mach-mvebu/lowlevel_spl.S @@ -5,7 +5,6 @@ #include #include -#ifdef CONFIG_MVEBU_BOOTROM_UARTBOOT ENTRY(save_boot_params) stmfd sp!, {r0 - r12, lr} /* @ save registers on stack */ ldr r12, =CONFIG_SPL_BOOTROM_SAVE @@ -19,11 +18,6 @@ ENTRY(return_to_bootrom) mov r0, #0x0 /* @ return value: 0x0 NO_ERR */ ldmfd sp!, {r0 - r12, pc} /* @ restore regs and return */ ENDPROC(return_to_bootrom) -#else -ENTRY(save_boot_params) - b save_boot_params_ret -ENDPROC(save_boot_params) -#endif /* * cache_inv - invalidate Cache line diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c index 778996eff5..0879873b97 100644 --- a/arch/arm/mach-mvebu/spl.c +++ b/arch/arm/mach-mvebu/spl.c @@ -20,8 +20,23 @@ static u32 get_boot_device(void) u32 val; u32 boot_device; + /* + * First check, if UART boot-mode is active. This can only + * be done, via the bootrom error register. Here the + * MSB marks if the UART mode is active. + */ + val = readl(CONFIG_BOOTROM_ERR_REG); + boot_device = (val & BOOTROM_ERR_MODE_MASK) >> BOOTROM_ERR_MODE_OFFS; + debug("BOOTROM_REG=0x%08x boot_device=0x%x\n", val, boot_device); + if (boot_device == BOOTROM_ERR_MODE_UART) + return BOOT_DEVICE_UART; + + /* + * Now check the SAR register for the strapped boot-device + */ val = readl(CONFIG_SAR_REG); /* SAR - Sample At Reset */ boot_device = (val & BOOT_DEV_SEL_MASK) >> BOOT_DEV_SEL_OFFS; + debug("SAR_REG=0x%08x boot_device=0x%x\n", val, boot_device); switch (boot_device) { #ifdef CONFIG_SPL_MMC_SUPPORT case BOOT_FROM_MMC: @@ -90,7 +105,6 @@ void board_init_f(ulong dummy) /* Setup DDR */ ddr3_init(); -#ifdef CONFIG_MVEBU_BOOTROM_UARTBOOT /* * Return to the BootROM to continue the Marvell xmodem * UART boot protocol. As initiated by the kwboot tool. @@ -102,6 +116,6 @@ void board_init_f(ulong dummy) * need to return to the BootROM to enable this xmodem * UART download. */ - return_to_bootrom(); -#endif + if (get_boot_device() == BOOT_DEVICE_UART) + return_to_bootrom(); } diff --git a/tools/kwboot.c b/tools/kwboot.c index c5f4492b5f..905ade3b01 100644 --- a/tools/kwboot.c +++ b/tools/kwboot.c @@ -9,10 +9,14 @@ * 2008. Chapter 24.2 "BootROM Firmware". */ +#include "kwbimage.h" +#include "mkimage.h" + #include #include #include #include +#include #include #include #include @@ -22,8 +26,6 @@ #include #include -#include "kwbimage.h" - #ifdef __GNUC__ #define PACKED __attribute((packed)) #else @@ -652,6 +654,14 @@ kwboot_img_patch_hdr(void *img, size_t size) hdr->blockid = IBR_HDR_UART_ID; + /* + * Subtract mkimage header size from destination address + * as this header is not expected by the Marvell BootROM. + * This way, the execution address is identical to the + * one the image is compiled for (TEXT_BASE). + */ + hdr->destaddr = hdr->destaddr - sizeof(struct image_header); + if (image_ver == 0) { struct main_hdr_v0 *hdr_v0 = img;