From: Laurent Dufour Date: Wed, 13 Jul 2022 15:47:29 +0000 (+0200) Subject: powerpc/pseries/mobility: set NMI watchdog factor during an LPM X-Git-Tag: baikal/mips/sdk6.1~5097^2~67 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=ec3c116ece4bf0385745a324d0d963364dd2e1e7;p=kernel.git powerpc/pseries/mobility: set NMI watchdog factor during an LPM During an LPM, while the memory transfer is in progress on the arrival side, some latencies are generated when accessing not yet transferred pages on the arrival side. Thus, the NMI watchdog may be triggered too frequently, which increases the risk to hit an NMI interrupt in a bad place in the kernel, leading to a kernel panic. Disabling the Hard Lockup Watchdog until the memory transfer could be a too strong work around, some users would want this timeout to be eventually triggered if the system is hanging even during an LPM. Introduce a new sysctl variable nmi_watchdog_factor. It allows to apply a factor to the NMI watchdog timeout during an LPM. Just before the CPUs are stopped for the switchover sequence, the NMI watchdog timer is set to watchdog_thresh + factor% A value of 0 has no effect. The default value is 200, meaning that the NMI watchdog is set to 30s during LPM (based on a 10s watchdog_thresh value). Once the memory transfer is achieved, the factor is reset to 0. Setting this value to a high number is like disabling the NMI watchdog during an LPM. Signed-off-by: Laurent Dufour Reviewed-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20220713154729.80789-5-ldufour@linux.ibm.com --- diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst index ddccd10774623..9b7fa1baf225b 100644 --- a/Documentation/admin-guide/sysctl/kernel.rst +++ b/Documentation/admin-guide/sysctl/kernel.rst @@ -592,6 +592,18 @@ to the guest kernel command line (see Documentation/admin-guide/kernel-parameters.rst). +nmi_wd_lpm_factor (PPC only) +============================ + +Factor to apply to the NMI watchdog timeout (only when ``nmi_watchdog`` is +set to 1). This factor represents the percentage added to +``watchdog_thresh`` when calculating the NMI watchdog timeout during an +LPM. The soft lockup timeout is not impacted. + +A value of 0 means no change. The default value is 200 meaning the NMI +watchdog is set to 30s (based on ``watchdog_thresh`` equal to 10). + + numa_balancing ============== diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c index 6297467072e6c..3d36a8955eaf8 100644 --- a/arch/powerpc/platforms/pseries/mobility.c +++ b/arch/powerpc/platforms/pseries/mobility.c @@ -48,6 +48,39 @@ struct update_props_workarea { #define MIGRATION_SCOPE (1) #define PRRN_SCOPE -2 +#ifdef CONFIG_PPC_WATCHDOG +static unsigned int nmi_wd_lpm_factor = 200; + +#ifdef CONFIG_SYSCTL +static struct ctl_table nmi_wd_lpm_factor_ctl_table[] = { + { + .procname = "nmi_wd_lpm_factor", + .data = &nmi_wd_lpm_factor, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_douintvec_minmax, + }, + {} +}; +static struct ctl_table nmi_wd_lpm_factor_sysctl_root[] = { + { + .procname = "kernel", + .mode = 0555, + .child = nmi_wd_lpm_factor_ctl_table, + }, + {} +}; + +static int __init register_nmi_wd_lpm_factor_sysctl(void) +{ + register_sysctl_table(nmi_wd_lpm_factor_sysctl_root); + + return 0; +} +device_initcall(register_nmi_wd_lpm_factor_sysctl); +#endif /* CONFIG_SYSCTL */ +#endif /* CONFIG_PPC_WATCHDOG */ + static int mobility_rtas_call(int token, char *buf, s32 scope) { int rc; @@ -702,13 +735,20 @@ static int pseries_suspend(u64 handle) static int pseries_migrate_partition(u64 handle) { int ret; + unsigned int factor = 0; +#ifdef CONFIG_PPC_WATCHDOG + factor = nmi_wd_lpm_factor; +#endif ret = wait_for_vasi_session_suspending(handle); if (ret) return ret; vas_migration_handler(VAS_SUSPEND); + if (factor) + watchdog_nmi_set_timeout_pct(factor); + ret = pseries_suspend(handle); if (ret == 0) { post_mobility_fixup(); @@ -722,6 +762,9 @@ static int pseries_migrate_partition(u64 handle) } else pseries_cancel_migration(handle, ret); + if (factor) + watchdog_nmi_set_timeout_pct(0); + vas_migration_handler(VAS_RESUME); return ret;