From: Tim Harvey Date: Tue, 8 Mar 2022 00:24:00 +0000 (-0800) Subject: board: gateworks: gw_ventana: convert to DM_I2C X-Git-Tag: baikal/mips/sdk5.9~3^2~104^2~111 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=e420f3dc0178dba92814d606f49e190a5e57da0a;p=uboot.git board: gateworks: gw_ventana: convert to DM_I2C convert to DM_I2C for U-Boot while leaving SPL legacy I2C: - Move I2C config from common to SPL - Move PMIC config from common to SPL (no need to re-configure pmic) - add DM_I2C support to eeprom/gsc functions shared by SPL and U-Boot Signed-off-by: Tim Harvey --- diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 7ec931c8a8..2be6518b63 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -16,10 +16,6 @@ #include #include #include -#include -#include -#include -#include #include "common.h" @@ -83,98 +79,6 @@ static iomux_v3_cfg_t const usdhc3_pads[] = { IOMUX_PADS(PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(USDHC_PAD_CTRL)), }; -/* - * I2C pad configs: - * I2C1: GSC - * I2C2: PMIC,PCIe Switch,Clock,Mezz - * I2C3: Multimedia/Expansion - */ -static struct i2c_pads_info mx6q_i2c_pad_info[] = { - { - .scl = { - .i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC, - .gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC, - .gp = IMX_GPIO_NR(3, 21) - }, - .sda = { - .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC, - .gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC, - .gp = IMX_GPIO_NR(3, 28) - } - }, { - .scl = { - .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC, - .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC, - .gp = IMX_GPIO_NR(4, 12) - }, - .sda = { - .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC, - .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC, - .gp = IMX_GPIO_NR(4, 13) - } - }, { - .scl = { - .i2c_mode = MX6Q_PAD_GPIO_3__I2C3_SCL | PC, - .gpio_mode = MX6Q_PAD_GPIO_3__GPIO1_IO03 | PC, - .gp = IMX_GPIO_NR(1, 3) - }, - .sda = { - .i2c_mode = MX6Q_PAD_GPIO_6__I2C3_SDA | PC, - .gpio_mode = MX6Q_PAD_GPIO_6__GPIO1_IO06 | PC, - .gp = IMX_GPIO_NR(1, 6) - } - } -}; - -static struct i2c_pads_info mx6dl_i2c_pad_info[] = { - { - .scl = { - .i2c_mode = MX6DL_PAD_EIM_D21__I2C1_SCL | PC, - .gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC, - .gp = IMX_GPIO_NR(3, 21) - }, - .sda = { - .i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC, - .gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC, - .gp = IMX_GPIO_NR(3, 28) - } - }, { - .scl = { - .i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | PC, - .gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | PC, - .gp = IMX_GPIO_NR(4, 12) - }, - .sda = { - .i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC, - .gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC, - .gp = IMX_GPIO_NR(4, 13) - } - }, { - .scl = { - .i2c_mode = MX6DL_PAD_GPIO_3__I2C3_SCL | PC, - .gpio_mode = MX6DL_PAD_GPIO_3__GPIO1_IO03 | PC, - .gp = IMX_GPIO_NR(1, 3) - }, - .sda = { - .i2c_mode = MX6DL_PAD_GPIO_6__I2C3_SDA | PC, - .gpio_mode = MX6DL_PAD_GPIO_6__GPIO1_IO06 | PC, - .gp = IMX_GPIO_NR(1, 6) - } - } -}; - -void setup_ventana_i2c(int i2c) -{ - struct i2c_pads_info *p; - - if (is_cpu_type(MXC_CPU_MX6Q)) - p = &mx6q_i2c_pad_info[i2c]; - else - p = &mx6dl_i2c_pad_info[i2c]; - - setup_i2c(i2c, CONFIG_SYS_I2C_SPEED, 0x7f, p); -} - /* * Baseboard specific GPIO */ @@ -1402,176 +1306,6 @@ void setup_board_gpio(int board, struct ventana_board_info *info) } } -/* setup board specific PMIC */ -void setup_pmic(void) -{ - struct pmic *p; - struct ventana_board_info ventana_info; - int board = read_eeprom(CONFIG_I2C_GSC, &ventana_info); - const int i2c_pmic = 1; - u32 reg; - char rev; - int i; - - /* determine board revision */ - rev = 'A'; - for (i = sizeof(ventana_info.model) - 1; i > 0; i--) { - if (ventana_info.model[i] >= 'A') { - rev = ventana_info.model[i]; - break; - } - } - - i2c_set_bus_num(i2c_pmic); - - /* configure PFUZE100 PMIC */ - if (!i2c_probe(CONFIG_POWER_PFUZE100_I2C_ADDR)) { - debug("probed PFUZE100@0x%x\n", CONFIG_POWER_PFUZE100_I2C_ADDR); - power_pfuze100_init(i2c_pmic); - p = pmic_get("PFUZE100"); - if (p && !pmic_probe(p)) { - pmic_reg_read(p, PFUZE100_DEVICEID, ®); - printf("PMIC: PFUZE100 ID=0x%02x\n", reg); - - /* Set VGEN1 to 1.5V and enable */ - pmic_reg_read(p, PFUZE100_VGEN1VOL, ®); - reg &= ~(LDO_VOL_MASK); - reg |= (LDOA_1_50V | LDO_EN); - pmic_reg_write(p, PFUZE100_VGEN1VOL, reg); - - /* Set SWBST to 5.0V and enable */ - pmic_reg_read(p, PFUZE100_SWBSTCON1, ®); - reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK); - reg |= (SWBST_5_00V | (SWBST_MODE_AUTO << SWBST_MODE_SHIFT)); - pmic_reg_write(p, PFUZE100_SWBSTCON1, reg); - - if (board == GW54xx && (rev == 'G')) { - /* Disable VGEN5 */ - pmic_reg_write(p, PFUZE100_VGEN5VOL, 0); - - /* Set VGEN6 to 2.5V and enable */ - pmic_reg_read(p, PFUZE100_VGEN6VOL, ®); - reg &= ~(LDO_VOL_MASK); - reg |= (LDOB_2_50V | LDO_EN); - pmic_reg_write(p, PFUZE100_VGEN6VOL, reg); - } - } - - /* put all switchers in continuous mode */ - pmic_reg_read(p, PFUZE100_SW1ABMODE, ®); - reg &= ~(SW_MODE_MASK); - reg |= PWM_PWM; - pmic_reg_write(p, PFUZE100_SW1ABMODE, reg); - - pmic_reg_read(p, PFUZE100_SW2MODE, ®); - reg &= ~(SW_MODE_MASK); - reg |= PWM_PWM; - pmic_reg_write(p, PFUZE100_SW2MODE, reg); - - pmic_reg_read(p, PFUZE100_SW3AMODE, ®); - reg &= ~(SW_MODE_MASK); - reg |= PWM_PWM; - pmic_reg_write(p, PFUZE100_SW3AMODE, reg); - - pmic_reg_read(p, PFUZE100_SW3BMODE, ®); - reg &= ~(SW_MODE_MASK); - reg |= PWM_PWM; - pmic_reg_write(p, PFUZE100_SW3BMODE, reg); - - pmic_reg_read(p, PFUZE100_SW4MODE, ®); - reg &= ~(SW_MODE_MASK); - reg |= PWM_PWM; - pmic_reg_write(p, PFUZE100_SW4MODE, reg); - } - - /* configure LTC3676 PMIC */ - else if (!i2c_probe(CONFIG_POWER_LTC3676_I2C_ADDR)) { - debug("probed LTC3676@0x%x\n", CONFIG_POWER_LTC3676_I2C_ADDR); - power_ltc3676_init(i2c_pmic); - p = pmic_get("LTC3676_PMIC"); - if (!p || pmic_probe(p)) - return; - puts("PMIC: LTC3676\n"); - /* - * set board-specific scalar for max CPU frequency - * per CPU based on the LDO enabled Operating Ranges - * defined in the respective IMX6DQ and IMX6SDL - * datasheets. The voltage resulting from the R1/R2 - * feedback inputs on Ventana is 1308mV. Note that this - * is a bit shy of the Vmin of 1350mV in the datasheet - * for LDO enabled mode but is as high as we can go. - */ - switch (board) { - case GW560x: - /* mask PGOOD during SW3 transition */ - pmic_reg_write(p, LTC3676_DVB3B, - 0x1f | LTC3676_PGOOD_MASK); - /* set SW3 (VDD_ARM) */ - pmic_reg_write(p, LTC3676_DVB3A, 0x1f); - break; - case GW5903: - /* mask PGOOD during SW3 transition */ - pmic_reg_write(p, LTC3676_DVB3B, - 0x1f | LTC3676_PGOOD_MASK); - /* set SW3 (VDD_ARM) */ - pmic_reg_write(p, LTC3676_DVB3A, 0x1f); - - /* mask PGOOD during SW4 transition */ - pmic_reg_write(p, LTC3676_DVB4B, - 0x1f | LTC3676_PGOOD_MASK); - /* set SW4 (VDD_SOC) */ - pmic_reg_write(p, LTC3676_DVB4A, 0x1f); - break; - case GW5905: - /* mask PGOOD during SW1 transition */ - pmic_reg_write(p, LTC3676_DVB1B, - 0x1f | LTC3676_PGOOD_MASK); - /* set SW1 (VDD_ARM) */ - pmic_reg_write(p, LTC3676_DVB1A, 0x1f); - - /* mask PGOOD during SW3 transition */ - pmic_reg_write(p, LTC3676_DVB3B, - 0x1f | LTC3676_PGOOD_MASK); - /* set SW3 (VDD_SOC) */ - pmic_reg_write(p, LTC3676_DVB3A, 0x1f); - break; - default: - /* mask PGOOD during SW1 transition */ - pmic_reg_write(p, LTC3676_DVB1B, - 0x1f | LTC3676_PGOOD_MASK); - /* set SW1 (VDD_SOC) */ - pmic_reg_write(p, LTC3676_DVB1A, 0x1f); - - /* mask PGOOD during SW3 transition */ - pmic_reg_write(p, LTC3676_DVB3B, - 0x1f | LTC3676_PGOOD_MASK); - /* set SW3 (VDD_ARM) */ - pmic_reg_write(p, LTC3676_DVB3A, 0x1f); - } - - /* put all switchers in continuous mode */ - pmic_reg_write(p, LTC3676_BUCK1, 0xc0); - pmic_reg_write(p, LTC3676_BUCK2, 0xc0); - pmic_reg_write(p, LTC3676_BUCK3, 0xc0); - pmic_reg_write(p, LTC3676_BUCK4, 0xc0); - } - - /* configure MP5416 PMIC */ - else if (!i2c_probe(0x69)) { - puts("PMIC: MP5416\n"); - switch (board) { - case GW5910: - /* SW1: VDD_ARM 1.2V -> (1.275 to 1.475) */ - reg = MP5416_VSET_EN | MP5416_VSET_SW1_SVAL(1475000); - i2c_write(0x69, MP5416_VSET_SW1, 1, (uint8_t *)®, 1); - /* SW4: VDD_SOC 1.2V -> (1.350 to 1.475) */ - reg = MP5416_VSET_EN | MP5416_VSET_SW4_SVAL(1475000); - i2c_write(0x69, MP5416_VSET_SW4, 1, (uint8_t *)®, 1); - break; - } - } -} - #include #define WDOG1_ADDR 0x20bc000 #define WDOG2_ADDR 0x20c0000 diff --git a/board/gateworks/gw_ventana/common.h b/board/gateworks/gw_ventana/common.h index edfb065f6a..526ff066b6 100644 --- a/board/gateworks/gw_ventana/common.h +++ b/board/gateworks/gw_ventana/common.h @@ -79,12 +79,8 @@ struct ventana { extern struct ventana gpio_cfg[GW_UNKNOWN]; -/* configure i2c iomux */ -void setup_ventana_i2c(int); /* configure uart iomux */ void setup_iomux_uart(void); -/* conifgure PMIC */ -void setup_pmic(void); /* configure gpio iomux/defaults */ void setup_iomux_gpio(int board, struct ventana_board_info *); /* late setup of GPIO (configuration per baseboard and env) */ diff --git a/board/gateworks/gw_ventana/eeprom.c b/board/gateworks/gw_ventana/eeprom.c index d21aa3c38f..c3a2bbe9ca 100644 --- a/board/gateworks/gw_ventana/eeprom.c +++ b/board/gateworks/gw_ventana/eeprom.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "gsc.h" #include "ventana_eeprom.h" @@ -34,12 +35,20 @@ read_eeprom(int bus, struct ventana_board_info *info) * board may be ready to probe the GSC before its firmware is * running. We will wait here indefinately for the GSC/EEPROM. */ +#if CONFIG_IS_ENABLED(DM_I2C) + while (1) { + if (i2c_get_dev(bus, GSC_EEPROM_ADDR)) + break; + mdelay(1); + } +#else while (1) { if (0 == i2c_set_bus_num(bus) && 0 == i2c_probe(GSC_EEPROM_ADDR)) break; mdelay(1); } +#endif /* read eeprom config section */ mdelay(10); diff --git a/board/gateworks/gw_ventana/gsc.c b/board/gateworks/gw_ventana/gsc.c index a5d6de7e0e..46448a54db 100644 --- a/board/gateworks/gw_ventana/gsc.c +++ b/board/gateworks/gw_ventana/gsc.c @@ -16,12 +16,31 @@ #include #include +#include +#include #include "ventana_eeprom.h" #include "gsc.h" DECLARE_GLOBAL_DATA_PTR; +#if CONFIG_IS_ENABLED(DM_I2C) +struct udevice *i2c_get_dev(int busno, int slave) +{ + struct udevice *dev, *bus; + int ret; + + ret = uclass_get_device_by_seq(UCLASS_I2C, busno, &bus); + if (ret) + return NULL; + ret = dm_i2c_probe(bus, slave, 0, &dev); + if (ret) + return NULL; + + return dev; +} +#endif + /* * The Gateworks System Controller will fail to ACK a master transaction if * it is busy, which can occur during its 1HZ timer tick while reading ADC's. @@ -34,9 +53,27 @@ int gsc_i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len) int retry = 3; int n = 0; int ret; +#if CONFIG_IS_ENABLED(DM_I2C) + struct udevice *dev; + + dev = i2c_get_dev(CONFIG_I2C_GSC, chip); + if (!dev) + return -ENODEV; + ret = i2c_set_chip_offset_len(dev, alen); + if (ret) { + puts("EEPROM: Failed to set alen\n"); + return ret; + } +#else + i2c_set_bus_num(CONFIG_I2C_GSC); +#endif while (n++ < retry) { +#if CONFIG_IS_ENABLED(DM_I2C) + ret = dm_i2c_read(dev, addr, buf, len); +#else ret = i2c_read(chip, addr, alen, buf, len); +#endif if (!ret) break; debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr, @@ -53,9 +90,25 @@ int gsc_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len) int retry = 3; int n = 0; int ret; +#if CONFIG_IS_ENABLED(DM_I2C) + struct udevice *dev; + + dev = i2c_get_dev(CONFIG_I2C_GSC, chip); + if (!dev) + return -ENODEV; + ret = i2c_set_chip_offset_len(dev, alen); + if (ret) { + puts("EEPROM: Failed to set alen\n"); + return ret; + } +#endif while (n++ < retry) { +#if CONFIG_IS_ENABLED(DM_I2C) + ret = dm_i2c_write(dev, addr, buf, len); +#else ret = i2c_write(chip, addr, alen, buf, len); +#endif if (!ret) break; debug("%s: 0x%02x 0x%02x retry%d: %d\n", __func__, chip, addr, @@ -79,7 +132,6 @@ int gsc_get_board_temp(void) node = fdt_node_offset_by_compatible(fdt, -1, "gw,gsc-adc"); if (node <= 0) return node; - i2c_set_bus_num(0); /* iterate over hwmon nodes */ node = fdt_first_subnode(fdt, node); @@ -122,7 +174,6 @@ int gsc_hwmon(void) node = fdt_node_offset_by_compatible(fdt, -1, "gw,gsc-adc"); if (node <= 0) return node; - i2c_set_bus_num(0); /* iterate over hwmon nodes */ node = fdt_first_subnode(fdt, node); @@ -184,7 +235,6 @@ int gsc_info(int verbose) { unsigned char buf[16]; - i2c_set_bus_num(0); if (gsc_i2c_read(GSC_SC_ADDR, 0, 1, buf, 16)) return CMD_RET_FAILURE; @@ -225,7 +275,6 @@ int gsc_boot_wd_disable(void) { u8 reg; - i2c_set_bus_num(CONFIG_I2C_GSC); if (!gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) { reg |= (1 << GSC_SC_CTRL1_WDDIS); if (!gsc_i2c_write(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) @@ -334,7 +383,6 @@ static int do_gsc_sleep(struct cmd_tbl *cmdtp, int flag, int argc, secs = dectoul(argv[1], NULL); printf("GSC Sleeping for %ld seconds\n", secs); - i2c_set_bus_num(0); reg = (secs >> 24) & 0xff; if (gsc_i2c_write(GSC_SC_ADDR, 9, 1, ®, 1)) goto error; @@ -377,7 +425,6 @@ static int do_gsc_wd(struct cmd_tbl *cmdtp, int flag, int argc, if (argc > 2) timeout = dectoul(argv[2], NULL); - i2c_set_bus_num(0); if (gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) return CMD_RET_FAILURE; reg &= ~((1 << GSC_SC_CTRL1_WDEN) | (1 << GSC_SC_CTRL1_WDTIME)); @@ -391,7 +438,6 @@ static int do_gsc_wd(struct cmd_tbl *cmdtp, int flag, int argc, printf("GSC Watchdog enabled with timeout=%d seconds\n", timeout); } else if (strcasecmp(argv[1], "disable") == 0) { - i2c_set_bus_num(0); if (gsc_i2c_read(GSC_SC_ADDR, GSC_SC_CTRL1, 1, ®, 1)) return CMD_RET_FAILURE; reg &= ~((1 << GSC_SC_CTRL1_WDEN) | (1 << GSC_SC_CTRL1_WDTIME)); diff --git a/board/gateworks/gw_ventana/gsc.h b/board/gateworks/gw_ventana/gsc.h index 5c34988828..2e1d25bc6f 100644 --- a/board/gateworks/gw_ventana/gsc.h +++ b/board/gateworks/gw_ventana/gsc.h @@ -68,4 +68,5 @@ int gsc_i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len); int gsc_info(int verbose); int gsc_boot_wd_disable(void); const char *gsc_get_dtb_name(int level, char *buf, int sz); +struct udevice *i2c_get_dev(int busno, int slave); #endif diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 8cf7914670..a76f0ea62f 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -138,8 +138,7 @@ static int detect_lvds(struct display_info_t const *dev) return 0; } - return i2c_set_bus_num(dev->bus) == 0 && - i2c_probe(dev->addr) == 0; + return (i2c_get_dev(dev->bus, dev->addr) ? 1 : 0); } static void enable_lvds(struct display_info_t const *dev) @@ -355,13 +354,6 @@ static void setup_display(void) } #endif /* CONFIG_VIDEO_IPUV3 */ -/* setup board specific PMIC */ -int power_init_board(void) -{ - setup_pmic(); - return 0; -} - /* * Most Ventana boards have a PLX PEX860x PCIe switch onboard and use its * GPIO's as PERST# signals for its downstream ports - configure the GPIO's @@ -490,12 +482,8 @@ int board_init(void) gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; /* read Gateworks EEPROM into global struct (used later) */ - setup_ventana_i2c(0); board_type = read_eeprom(CONFIG_I2C_GSC, &ventana_info); - setup_ventana_i2c(1); - setup_ventana_i2c(2); - setup_iomux_gpio(board_type, &ventana_info); return 0; @@ -925,8 +913,7 @@ void ft_board_pci_fixup(void *blob, struct bd_info *bd) */ if ((dev->vendor == PCI_VENDOR_ID_TI) && (dev->device == 0x8240) && - (i2c_set_bus_num(1) == 0) && - (i2c_probe(0x50) == 0)) + i2c_get_dev(1, 0x50)) { np = fdt_add_pci_path(blob, dev); if (np > 0) diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c index 5a69aff671..60e2768d2e 100644 --- a/board/gateworks/gw_ventana/gw_ventana_spl.c +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c @@ -20,6 +20,10 @@ #include #include #include +#include +#include +#include +#include #include "gsc.h" #include "common.h" @@ -667,6 +671,268 @@ static void ccgr_init(void) writel(0x000003FF, &ccm->CCGR6); } +/* + * I2C pad configs: + * I2C1: GSC + * I2C2: PMIC,PCIe Switch,Clock,Mezz + * I2C3: Multimedia/Expansion + */ +static struct i2c_pads_info mx6q_i2c_pad_info[] = { + { + .scl = { + .i2c_mode = MX6Q_PAD_EIM_D21__I2C1_SCL | PC, + .gpio_mode = MX6Q_PAD_EIM_D21__GPIO3_IO21 | PC, + .gp = IMX_GPIO_NR(3, 21) + }, + .sda = { + .i2c_mode = MX6Q_PAD_EIM_D28__I2C1_SDA | PC, + .gpio_mode = MX6Q_PAD_EIM_D28__GPIO3_IO28 | PC, + .gp = IMX_GPIO_NR(3, 28) + } + }, { + .scl = { + .i2c_mode = MX6Q_PAD_KEY_COL3__I2C2_SCL | PC, + .gpio_mode = MX6Q_PAD_KEY_COL3__GPIO4_IO12 | PC, + .gp = IMX_GPIO_NR(4, 12) + }, + .sda = { + .i2c_mode = MX6Q_PAD_KEY_ROW3__I2C2_SDA | PC, + .gpio_mode = MX6Q_PAD_KEY_ROW3__GPIO4_IO13 | PC, + .gp = IMX_GPIO_NR(4, 13) + } + }, { + .scl = { + .i2c_mode = MX6Q_PAD_GPIO_3__I2C3_SCL | PC, + .gpio_mode = MX6Q_PAD_GPIO_3__GPIO1_IO03 | PC, + .gp = IMX_GPIO_NR(1, 3) + }, + .sda = { + .i2c_mode = MX6Q_PAD_GPIO_6__I2C3_SDA | PC, + .gpio_mode = MX6Q_PAD_GPIO_6__GPIO1_IO06 | PC, + .gp = IMX_GPIO_NR(1, 6) + } + } +}; + +static struct i2c_pads_info mx6dl_i2c_pad_info[] = { + { + .scl = { + .i2c_mode = MX6DL_PAD_EIM_D21__I2C1_SCL | PC, + .gpio_mode = MX6DL_PAD_EIM_D21__GPIO3_IO21 | PC, + .gp = IMX_GPIO_NR(3, 21) + }, + .sda = { + .i2c_mode = MX6DL_PAD_EIM_D28__I2C1_SDA | PC, + .gpio_mode = MX6DL_PAD_EIM_D28__GPIO3_IO28 | PC, + .gp = IMX_GPIO_NR(3, 28) + } + }, { + .scl = { + .i2c_mode = MX6DL_PAD_KEY_COL3__I2C2_SCL | PC, + .gpio_mode = MX6DL_PAD_KEY_COL3__GPIO4_IO12 | PC, + .gp = IMX_GPIO_NR(4, 12) + }, + .sda = { + .i2c_mode = MX6DL_PAD_KEY_ROW3__I2C2_SDA | PC, + .gpio_mode = MX6DL_PAD_KEY_ROW3__GPIO4_IO13 | PC, + .gp = IMX_GPIO_NR(4, 13) + } + }, { + .scl = { + .i2c_mode = MX6DL_PAD_GPIO_3__I2C3_SCL | PC, + .gpio_mode = MX6DL_PAD_GPIO_3__GPIO1_IO03 | PC, + .gp = IMX_GPIO_NR(1, 3) + }, + .sda = { + .i2c_mode = MX6DL_PAD_GPIO_6__I2C3_SDA | PC, + .gpio_mode = MX6DL_PAD_GPIO_6__GPIO1_IO06 | PC, + .gp = IMX_GPIO_NR(1, 6) + } + } +}; + +static void setup_ventana_i2c(int i2c) +{ + struct i2c_pads_info *p; + + if (is_cpu_type(MXC_CPU_MX6Q)) + p = &mx6q_i2c_pad_info[i2c]; + else + p = &mx6dl_i2c_pad_info[i2c]; + + setup_i2c(i2c, CONFIG_SYS_I2C_SPEED, 0x7f, p); +} + +/* setup board specific PMIC */ +void setup_pmic(void) +{ + struct pmic *p; + struct ventana_board_info ventana_info; + int board = read_eeprom(CONFIG_I2C_GSC, &ventana_info); + const int i2c_pmic = 1; + u32 reg; + char rev; + int i; + + /* determine board revision */ + rev = 'A'; + for (i = sizeof(ventana_info.model) - 1; i > 0; i--) { + if (ventana_info.model[i] >= 'A') { + rev = ventana_info.model[i]; + break; + } + } + + i2c_set_bus_num(i2c_pmic); + + /* configure PFUZE100 PMIC */ + if (!i2c_probe(CONFIG_POWER_PFUZE100_I2C_ADDR)) { + debug("probed PFUZE100@0x%x\n", CONFIG_POWER_PFUZE100_I2C_ADDR); + power_pfuze100_init(i2c_pmic); + p = pmic_get("PFUZE100"); + if (p && !pmic_probe(p)) { + pmic_reg_read(p, PFUZE100_DEVICEID, ®); + printf("PMIC: PFUZE100 ID=0x%02x\n", reg); + + /* Set VGEN1 to 1.5V and enable */ + pmic_reg_read(p, PFUZE100_VGEN1VOL, ®); + reg &= ~(LDO_VOL_MASK); + reg |= (LDOA_1_50V | LDO_EN); + pmic_reg_write(p, PFUZE100_VGEN1VOL, reg); + + /* Set SWBST to 5.0V and enable */ + pmic_reg_read(p, PFUZE100_SWBSTCON1, ®); + reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK); + reg |= (SWBST_5_00V | (SWBST_MODE_AUTO << SWBST_MODE_SHIFT)); + pmic_reg_write(p, PFUZE100_SWBSTCON1, reg); + + if (board == GW54xx && (rev == 'G')) { + /* Disable VGEN5 */ + pmic_reg_write(p, PFUZE100_VGEN5VOL, 0); + + /* Set VGEN6 to 2.5V and enable */ + pmic_reg_read(p, PFUZE100_VGEN6VOL, ®); + reg &= ~(LDO_VOL_MASK); + reg |= (LDOB_2_50V | LDO_EN); + pmic_reg_write(p, PFUZE100_VGEN6VOL, reg); + } + } + + /* put all switchers in continuous mode */ + pmic_reg_read(p, PFUZE100_SW1ABMODE, ®); + reg &= ~(SW_MODE_MASK); + reg |= PWM_PWM; + pmic_reg_write(p, PFUZE100_SW1ABMODE, reg); + + pmic_reg_read(p, PFUZE100_SW2MODE, ®); + reg &= ~(SW_MODE_MASK); + reg |= PWM_PWM; + pmic_reg_write(p, PFUZE100_SW2MODE, reg); + + pmic_reg_read(p, PFUZE100_SW3AMODE, ®); + reg &= ~(SW_MODE_MASK); + reg |= PWM_PWM; + pmic_reg_write(p, PFUZE100_SW3AMODE, reg); + + pmic_reg_read(p, PFUZE100_SW3BMODE, ®); + reg &= ~(SW_MODE_MASK); + reg |= PWM_PWM; + pmic_reg_write(p, PFUZE100_SW3BMODE, reg); + + pmic_reg_read(p, PFUZE100_SW4MODE, ®); + reg &= ~(SW_MODE_MASK); + reg |= PWM_PWM; + pmic_reg_write(p, PFUZE100_SW4MODE, reg); + } + + /* configure LTC3676 PMIC */ + else if (!i2c_probe(CONFIG_POWER_LTC3676_I2C_ADDR)) { + debug("probed LTC3676@0x%x\n", CONFIG_POWER_LTC3676_I2C_ADDR); + power_ltc3676_init(i2c_pmic); + p = pmic_get("LTC3676_PMIC"); + if (!p || pmic_probe(p)) + return; + puts("PMIC: LTC3676\n"); + /* + * set board-specific scalar for max CPU frequency + * per CPU based on the LDO enabled Operating Ranges + * defined in the respective IMX6DQ and IMX6SDL + * datasheets. The voltage resulting from the R1/R2 + * feedback inputs on Ventana is 1308mV. Note that this + * is a bit shy of the Vmin of 1350mV in the datasheet + * for LDO enabled mode but is as high as we can go. + */ + switch (board) { + case GW560x: + /* mask PGOOD during SW3 transition */ + pmic_reg_write(p, LTC3676_DVB3B, + 0x1f | LTC3676_PGOOD_MASK); + /* set SW3 (VDD_ARM) */ + pmic_reg_write(p, LTC3676_DVB3A, 0x1f); + break; + case GW5903: + /* mask PGOOD during SW3 transition */ + pmic_reg_write(p, LTC3676_DVB3B, + 0x1f | LTC3676_PGOOD_MASK); + /* set SW3 (VDD_ARM) */ + pmic_reg_write(p, LTC3676_DVB3A, 0x1f); + + /* mask PGOOD during SW4 transition */ + pmic_reg_write(p, LTC3676_DVB4B, + 0x1f | LTC3676_PGOOD_MASK); + /* set SW4 (VDD_SOC) */ + pmic_reg_write(p, LTC3676_DVB4A, 0x1f); + break; + case GW5905: + /* mask PGOOD during SW1 transition */ + pmic_reg_write(p, LTC3676_DVB1B, + 0x1f | LTC3676_PGOOD_MASK); + /* set SW1 (VDD_ARM) */ + pmic_reg_write(p, LTC3676_DVB1A, 0x1f); + + /* mask PGOOD during SW3 transition */ + pmic_reg_write(p, LTC3676_DVB3B, + 0x1f | LTC3676_PGOOD_MASK); + /* set SW3 (VDD_SOC) */ + pmic_reg_write(p, LTC3676_DVB3A, 0x1f); + break; + default: + /* mask PGOOD during SW1 transition */ + pmic_reg_write(p, LTC3676_DVB1B, + 0x1f | LTC3676_PGOOD_MASK); + /* set SW1 (VDD_SOC) */ + pmic_reg_write(p, LTC3676_DVB1A, 0x1f); + + /* mask PGOOD during SW3 transition */ + pmic_reg_write(p, LTC3676_DVB3B, + 0x1f | LTC3676_PGOOD_MASK); + /* set SW3 (VDD_ARM) */ + pmic_reg_write(p, LTC3676_DVB3A, 0x1f); + } + + /* put all switchers in continuous mode */ + pmic_reg_write(p, LTC3676_BUCK1, 0xc0); + pmic_reg_write(p, LTC3676_BUCK2, 0xc0); + pmic_reg_write(p, LTC3676_BUCK3, 0xc0); + pmic_reg_write(p, LTC3676_BUCK4, 0xc0); + } + + /* configure MP5416 PMIC */ + else if (!i2c_probe(0x69)) { + puts("PMIC: MP5416\n"); + switch (board) { + case GW5910: + /* SW1: VDD_ARM 1.2V -> (1.275 to 1.475) */ + reg = MP5416_VSET_EN | MP5416_VSET_SW1_SVAL(1475000); + i2c_write(0x69, MP5416_VSET_SW1, 1, (uint8_t *)®, 1); + /* SW4: VDD_SOC 1.2V -> (1.350 to 1.475) */ + reg = MP5416_VSET_EN | MP5416_VSET_SW4_SVAL(1475000); + i2c_write(0x69, MP5416_VSET_SW4, 1, (uint8_t *)®, 1); + break; + } + } +} + /* * called from C runtime startup code (arch/arm/lib/crt0.S:_main) * - we have a stack and a place to store GD, both in SRAM diff --git a/configs/gwventana_emmc_defconfig b/configs/gwventana_emmc_defconfig index 4371a144f2..f65f28e4cd 100644 --- a/configs/gwventana_emmc_defconfig +++ b/configs/gwventana_emmc_defconfig @@ -90,7 +90,7 @@ CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_BOUNCE_BUFFER=y CONFIG_DWC_AHSATA=y -CONFIG_SYS_I2C_LEGACY=y +CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MXC=y CONFIG_LED=y diff --git a/configs/gwventana_gw5904_defconfig b/configs/gwventana_gw5904_defconfig index 8a5050667b..1d95fb07fd 100644 --- a/configs/gwventana_gw5904_defconfig +++ b/configs/gwventana_gw5904_defconfig @@ -90,7 +90,7 @@ CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_BOUNCE_BUFFER=y CONFIG_DWC_AHSATA=y -CONFIG_SYS_I2C_LEGACY=y +CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MXC=y CONFIG_LED=y diff --git a/configs/gwventana_nand_defconfig b/configs/gwventana_nand_defconfig index 42e4f98b13..275b2c68d6 100644 --- a/configs/gwventana_nand_defconfig +++ b/configs/gwventana_nand_defconfig @@ -92,7 +92,7 @@ CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_BOUNCE_BUFFER=y CONFIG_DWC_AHSATA=y -CONFIG_SYS_I2C_LEGACY=y +CONFIG_DM_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MXC=y CONFIG_LED=y