From: Carl Huang <cjhuang@codeaurora.org>
Date: Thu, 1 Oct 2020 09:34:49 +0000 (+0300)
Subject: ath11k: enable idle power save mode
X-Git-Tag: baikal/mips/sdk5.9~12462^2~82^2^2~2
X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=d3f0d596785175d7871f7f7048b398e476a6746f;p=kernel.git

ath11k: enable idle power save mode

Host sends wmi command to allow hardware enter idle power
save mode in ath11k_mac_op_start function.

hw parameter idle_ps indicates whether idle power save is supported.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1601544890-13450-8-git-send-email-kvalo@codeaurora.org
---

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index e94d760b21a01..ebd6886a8c184 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -64,6 +64,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 					BIT(NL80211_IFTYPE_MESH_POINT),
 		.supports_monitor = true,
 		.supports_shadow_regs = false,
+		.idle_ps = false,
 	},
 	{
 		.hw_rev = ATH11K_HW_IPQ6018_HW10,
@@ -100,6 +101,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 					BIT(NL80211_IFTYPE_MESH_POINT),
 		.supports_monitor = true,
 		.supports_shadow_regs = false,
+		.idle_ps = false,
 	},
 	{
 		.name = "qca6390 hw2.0",
@@ -135,6 +137,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 					BIT(NL80211_IFTYPE_AP),
 		.supports_monitor = false,
 		.supports_shadow_regs = true,
+		.idle_ps = true,
 	},
 };
 
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index 8e908bcd491eb..1dda4257e6d75 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -160,6 +160,7 @@ struct ath11k_hw_params {
 	u16 interface_modes;
 	bool supports_monitor;
 	bool supports_shadow_regs;
+	bool idle_ps;
 };
 
 struct ath11k_hw_ops {
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 38a8c419ef212..3f63a7bd6b59c 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -4208,6 +4208,15 @@ static int ath11k_mac_op_start(struct ieee80211_hw *hw)
 	rcu_assign_pointer(ab->pdevs_active[ar->pdev_idx],
 			   &ab->pdevs[ar->pdev_idx]);
 
+	/* allow device to enter IMPS */
+	if (ab->hw_params.idle_ps) {
+		ret = ath11k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_IDLE_PS_CONFIG,
+						1, pdev->pdev_id);
+		if (ret) {
+			ath11k_err(ab, "failed to enable idle ps: %d\n", ret);
+			goto err;
+		}
+	}
 	return 0;
 
 err: