From: Vladimir Oltean Date: Mon, 20 Sep 2021 21:42:09 +0000 (+0300) Subject: net: dsa: realtek: register the MDIO bus under devres X-Git-Tag: baikal/aarch64/sdk6.1~5691^2~10^2 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=be17118eaf26207833bb939c302d83548442669c;p=kernel.git net: dsa: realtek: register the MDIO bus under devres The Linux device model permits both the ->shutdown and ->remove driver methods to get called during a shutdown procedure. Example: a DSA switch which sits on an SPI bus, and the SPI bus driver calls this on its ->shutdown method: spi_unregister_controller -> device_for_each_child(&ctlr->dev, NULL, __unregister); -> spi_unregister_device(to_spi_device(dev)); -> device_del(&spi->dev); So this is a simple pattern which can theoretically appear on any bus, although the only other buses on which I've been able to find it are I2C: i2c_del_adapter -> device_for_each_child(&adap->dev, NULL, __unregister_client); -> i2c_unregister_device(client); -> device_unregister(&client->dev); The implication of this pattern is that devices on these buses can be unregistered after having been shut down. The drivers for these devices might choose to return early either from ->remove or ->shutdown if the other callback has already run once, and they might choose that the ->shutdown method should only perform a subset of the teardown done by ->remove (to avoid unnecessary delays when rebooting). So in other words, the device driver may choose on ->remove to not do anything (therefore to not unregister an MDIO bus it has registered on ->probe), because this ->remove is actually triggered by the device_shutdown path, and its ->shutdown method has already run and done the minimally required cleanup. This used to be fine until the blamed commit, but now, the following BUG_ON triggers: void mdiobus_free(struct mii_bus *bus) { /* For compatibility with error handling in drivers. */ if (bus->state == MDIOBUS_ALLOCATED) { kfree(bus); return; } BUG_ON(bus->state != MDIOBUS_UNREGISTERED); bus->state = MDIOBUS_RELEASED; put_device(&bus->dev); } In other words, there is an attempt to free an MDIO bus which was not unregistered. The attempt to free it comes from the devres release callbacks of the SPI device, which are executed after the device is unregistered. I'm not saying that the fact that MDIO buses allocated using devres would automatically get unregistered wasn't strange. I'm just saying that the commit didn't care about auditing existing call paths in the kernel, and now, the following code sequences are potentially buggy: (a) devm_mdiobus_alloc followed by plain mdiobus_register, for a device located on a bus that unregisters its children on shutdown. After the blamed patch, either both the alloc and the register should use devres, or none should. (b) devm_mdiobus_alloc followed by plain mdiobus_register, and then no mdiobus_unregister at all in the remove path. After the blamed patch, nobody unregisters the MDIO bus anymore, so this is even more buggy than the previous case which needs a specific bus configuration to be seen, this one is an unconditional bug. In this case, the Realtek drivers fall under category (b). To solve it, we can register the MDIO bus under devres too, which restores the previous behavior. Fixes: 50298441a391 ("net: phy: don't abuse devres in devm_mdiobus_register()") Reported-by: Lino Sanfilippo Reported-by: Alvin Šipraga Signed-off-by: Vladimir Oltean Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- diff --git a/drivers/net/dsa/realtek-smi-core.c b/drivers/net/dsa/realtek-smi-core.c index dd2f0d6208b3f..2fcfd917b876b 100644 --- a/drivers/net/dsa/realtek-smi-core.c +++ b/drivers/net/dsa/realtek-smi-core.c @@ -368,7 +368,7 @@ int realtek_smi_setup_mdio(struct realtek_smi *smi) smi->slave_mii_bus->parent = smi->dev; smi->ds->slave_mii_bus = smi->slave_mii_bus; - ret = of_mdiobus_register(smi->slave_mii_bus, mdio_np); + ret = devm_of_mdiobus_register(smi->dev, smi->slave_mii_bus, mdio_np); if (ret) { dev_err(smi->dev, "unable to register MDIO bus %s\n", smi->slave_mii_bus->id);