From: Denis Odintsov Date: Wed, 15 Sep 2021 13:45:31 +0000 (+0200) Subject: phy: marvell: cp110: Support SATA invert polarity X-Git-Tag: baikal/mips/sdk5.9~15^2^2~102^2~6^2~43 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=bcdbaead28bbde4ebd148ecc584f0ee692bea079;p=uboot.git phy: marvell: cp110: Support SATA invert polarity In commit dfb551cb cp110 configuration initially done in u-boot was removed and delegated to atf firmware as smc call. That commit didn't account for later introduced in 898f527e SATA invert polarity support. This patch adds support of passing SATA invert polarity flags to atf firmware during the smc call. Signed-off-by: Denis Odintsov Cc: Baruch Siach Cc: Rabeeh Khoury Cc: Stefan Roese Reviewed-by: Stefan Roese --- diff --git a/drivers/phy/marvell/comphy_cp110.c b/drivers/phy/marvell/comphy_cp110.c index 418318d12f..4fe2dfcdd1 100644 --- a/drivers/phy/marvell/comphy_cp110.c +++ b/drivers/phy/marvell/comphy_cp110.c @@ -36,6 +36,10 @@ DECLARE_GLOBAL_DATA_PTR; (COMPHY_CALLER_UBOOT | ((pcie_width) << 18) | \ ((clk_src) << 17) | COMPHY_FW_FORMAT(mode, 0, speeds)) +/* Invert polarity are bits 1-0 of the mode */ +#define COMPHY_FW_SATA_FORMAT(mode, invert) \ + ((invert) | COMPHY_FW_MODE_FORMAT(mode)) + #define COMPHY_SATA_MODE 0x1 #define COMPHY_SGMII_MODE 0x2 /* SGMII 1G */ #define COMPHY_HS_SGMII_MODE 0x3 /* SGMII 2.5G */ @@ -607,7 +611,8 @@ int comphy_cp110_init(struct chip_serdes_phy_config *ptr_chip_cfg, break; case COMPHY_TYPE_SATA0: case COMPHY_TYPE_SATA1: - mode = COMPHY_FW_MODE_FORMAT(COMPHY_SATA_MODE); + mode = COMPHY_FW_SATA_FORMAT(COMPHY_SATA_MODE, + serdes_map[lane].invert); ret = comphy_sata_power_up(lane, hpipe_base_addr, comphy_base_addr, ptr_chip_cfg->cp_index,