From: Yash Shah Date: Thu, 23 Apr 2020 11:27:16 +0000 (+0530) Subject: pwm: Add PWM driver for SiFive SoC X-Git-Tag: baikal/mips/sdk5.9~310^2 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=abd1b3323040d2cbaa56eaff9e91db5cae06cdbc;p=uboot.git pwm: Add PWM driver for SiFive SoC Adds a PWM driver for PWM chip present in SiFive's HiFive Unleashed SoC This driver is simple port of Linux pwm sifive driver from Linux v5.6 commit: 9e37a53eb051 ("pwm: sifive: Add a driver for SiFive SoC PWM") Signed-off-by: Yash Shah Reviewed-by: Heiko Schocher --- diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig index edb3f0f538..61eb468cde 100644 --- a/drivers/pwm/Kconfig +++ b/drivers/pwm/Kconfig @@ -47,6 +47,12 @@ config PWM_SANDBOX useful. The PWM can be enabled but is not connected to any outputs so this is not very useful. +config PWM_SIFIVE + bool "Enable support for SiFive PWM" + depends on DM_PWM + help + This PWM is found SiFive's FU540 and other SoCs. + config PWM_TEGRA bool "Enable support for the Tegra PWM" depends on DM_PWM diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile index 2c3a069006..0f4e84b04d 100644 --- a/drivers/pwm/Makefile +++ b/drivers/pwm/Makefile @@ -15,5 +15,6 @@ obj-$(CONFIG_PWM_IMX) += pwm-imx.o pwm-imx-util.o obj-$(CONFIG_PWM_MTK) += pwm-mtk.o obj-$(CONFIG_PWM_ROCKCHIP) += rk_pwm.o obj-$(CONFIG_PWM_SANDBOX) += sandbox_pwm.o +obj-$(CONFIG_PWM_SIFIVE) += pwm-sifive.o obj-$(CONFIG_PWM_TEGRA) += tegra_pwm.o obj-$(CONFIG_PWM_SUNXI) += sunxi_pwm.o diff --git a/drivers/pwm/pwm-sifive.c b/drivers/pwm/pwm-sifive.c new file mode 100644 index 0000000000..77bc659fef --- /dev/null +++ b/drivers/pwm/pwm-sifive.c @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 SiFive, Inc + * For SiFive's PWM IP block documentation please refer Chapter 14 of + * Reference Manual : https://static.dev.sifive.com/FU540-C000-v1.0.pdf + * + * Limitations: + * - When changing both duty cycle and period, we cannot prevent in + * software that the output might produce a period with mixed + * settings (new period length and old duty cycle). + * - The hardware cannot generate a 100% duty cycle. + * - The hardware generates only inverted output. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* PWMCFG fields */ +#define PWM_SIFIVE_PWMCFG_SCALE GENMASK(3, 0) +#define PWM_SIFIVE_PWMCFG_STICKY BIT(8) +#define PWM_SIFIVE_PWMCFG_ZERO_CMP BIT(9) +#define PWM_SIFIVE_PWMCFG_DEGLITCH BIT(10) +#define PWM_SIFIVE_PWMCFG_EN_ALWAYS BIT(12) +#define PWM_SIFIVE_PWMCFG_EN_ONCE BIT(13) +#define PWM_SIFIVE_PWMCFG_CENTER BIT(16) +#define PWM_SIFIVE_PWMCFG_GANG BIT(24) +#define PWM_SIFIVE_PWMCFG_IP BIT(28) + +/* PWM_SIFIVE_SIZE_PWMCMP is used to calculate offset for pwmcmpX registers */ +#define PWM_SIFIVE_SIZE_PWMCMP 4 +#define PWM_SIFIVE_CMPWIDTH 16 + +DECLARE_GLOBAL_DATA_PTR; + +struct pwm_sifive_regs { + unsigned long cfg; + unsigned long cnt; + unsigned long pwms; + unsigned long cmp0; +}; + +struct pwm_sifive_data { + struct pwm_sifive_regs regs; +}; + +struct pwm_sifive_priv { + void __iomem *base; + ulong freq; + const struct pwm_sifive_data *data; +}; + +static int pwm_sifive_set_config(struct udevice *dev, uint channel, + uint period_ns, uint duty_ns) +{ + struct pwm_sifive_priv *priv = dev_get_priv(dev); + const struct pwm_sifive_regs *regs = &priv->data->regs; + unsigned long scale_pow; + unsigned long long num; + u32 scale, val = 0, frac; + + debug("%s: period_ns=%u, duty_ns=%u\n", __func__, period_ns, duty_ns); + + /* + * The PWM unit is used with pwmzerocmp=0, so the only way to modify the + * period length is using pwmscale which provides the number of bits the + * counter is shifted before being feed to the comparators. A period + * lasts (1 << (PWM_SIFIVE_CMPWIDTH + pwmscale)) clock ticks. + * (1 << (PWM_SIFIVE_CMPWIDTH + scale)) * 10^9/rate = period + */ + scale_pow = lldiv((uint64_t)priv->freq * period_ns, 1000000000); + scale = clamp(ilog2(scale_pow) - PWM_SIFIVE_CMPWIDTH, 0, 0xf); + val |= FIELD_PREP(PWM_SIFIVE_PWMCFG_SCALE, scale); + + /* + * The problem of output producing mixed setting as mentioned at top, + * occurs here. To minimize the window for this problem, we are + * calculating the register values first and then writing them + * consecutively + */ + num = (u64)duty_ns * (1U << PWM_SIFIVE_CMPWIDTH); + frac = DIV_ROUND_CLOSEST_ULL(num, period_ns); + frac = min(frac, (1U << PWM_SIFIVE_CMPWIDTH) - 1); + + writel(val, priv->base + regs->cfg); + writel(frac, priv->base + regs->cmp0 + channel * + PWM_SIFIVE_SIZE_PWMCMP); + + return 0; +} + +static int pwm_sifive_set_enable(struct udevice *dev, uint channel, bool enable) +{ + struct pwm_sifive_priv *priv = dev_get_priv(dev); + const struct pwm_sifive_regs *regs = &priv->data->regs; + u32 val; + + debug("%s: Enable '%s'\n", __func__, dev->name); + + if (enable) { + val = readl(priv->base + regs->cfg); + val |= PWM_SIFIVE_PWMCFG_EN_ALWAYS; + writel(val, priv->base + regs->cfg); + } else { + writel(0, priv->base + regs->cmp0 + channel * + PWM_SIFIVE_SIZE_PWMCMP); + } + + return 0; +} + +static int pwm_sifive_ofdata_to_platdata(struct udevice *dev) +{ + struct pwm_sifive_priv *priv = dev_get_priv(dev); + + priv->base = dev_read_addr_ptr(dev); + + return 0; +} + +static int pwm_sifive_probe(struct udevice *dev) +{ + struct pwm_sifive_priv *priv = dev_get_priv(dev); + struct clk clk; + int ret = 0; + + ret = clk_get_by_index(dev, 0, &clk); + if (ret < 0) { + debug("%s get clock fail!\n", __func__); + return -EINVAL; + } + + priv->freq = clk_get_rate(&clk); + priv->data = (struct pwm_sifive_data *)dev_get_driver_data(dev); + + return 0; +} + +static const struct pwm_ops pwm_sifive_ops = { + .set_config = pwm_sifive_set_config, + .set_enable = pwm_sifive_set_enable, +}; + +static const struct pwm_sifive_data pwm_data = { + .regs = { + .cfg = 0x00, + .cnt = 0x08, + .pwms = 0x10, + .cmp0 = 0x20, + }, +}; + +static const struct udevice_id pwm_sifive_ids[] = { + { .compatible = "sifive,pwm0", .data = (ulong)&pwm_data}, + { } +}; + +U_BOOT_DRIVER(pwm_sifive) = { + .name = "pwm_sifive", + .id = UCLASS_PWM, + .of_match = pwm_sifive_ids, + .ops = &pwm_sifive_ops, + .ofdata_to_platdata = pwm_sifive_ofdata_to_platdata, + .probe = pwm_sifive_probe, + .priv_auto_alloc_size = sizeof(struct pwm_sifive_priv), +};