From: Tom Rini Date: Sat, 11 Jun 2022 03:03:09 +0000 (-0400) Subject: spl: Ensure all SPL symbols in Kconfig have some SPL dependency X-Git-Tag: baikal/mips/sdk5.8.2~5^2~292^2~4^2~19 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=940e730c85b524d5cd69f3373ce2083940f99727;p=uboot.git spl: Ensure all SPL symbols in Kconfig have some SPL dependency Tighten up symbol dependencies in a number of places. Ensure that a SPL specific option has at least a direct dependency on SPL. In places where it's clear that we depend on something more specific, use that dependency instead. This means in a very small number of places we can drop redundant dependencies. Reported-by: Pali Rohár Signed-off-by: Tom Rini --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ef79fc3a0a..423fca27de 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1119,7 +1119,6 @@ config ARCH_SOCFPGA select SPL_DM_SERIAL select SPL_LIBCOMMON_SUPPORT select SPL_LIBGENERIC_SUPPORT - select SPL_NAND_SUPPORT if SPL_NAND_DENALI select SPL_OF_CONTROL select SPL_SEPARATE_BSS if TARGET_SOCFPGA_SOC64 select SPL_SERIAL diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index 72d12b4e07..1305238c9d 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -76,6 +76,7 @@ config ARMV8_SEC_FIRMWARE_SUPPORT config SPL_ARMV8_SEC_FIRMWARE_SUPPORT bool "Enable ARMv8 secure monitor firmware framework support for SPL" + depends on SPL select SPL_FIT select SPL_OF_LIBFDT help @@ -83,6 +84,7 @@ config SPL_ARMV8_SEC_FIRMWARE_SUPPORT config SPL_RECOVER_DATA_SECTION bool "save/restore SPL data section" + depends on SPL help Say Y here to save SPL data section for cold boot, and restore at warm boot in SPL phase. diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index 8f185c192d..2ba7454457 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -20,13 +20,13 @@ config MU_BASE_SPL config IMX8QM select IMX8 select SUPPORT_SPL - select SPL_RECOVER_DATA_SECTION + select SPL_RECOVER_DATA_SECTION if SPL bool config IMX8QXP select IMX8 select SUPPORT_SPL - select SPL_RECOVER_DATA_SECTION + select SPL_RECOVER_DATA_SECTION if SPL bool config SYS_SOC diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 1ac43e98bb..7e86c6a0cd 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -945,6 +945,7 @@ config ACPI_GPE config SPL_ACPI_GPE bool "Support ACPI general-purpose events in SPL" + depends on SPL help Enable a driver for ACPI GPEs to allow peripherals to send interrupts via ACPI to the OS. In U-Boot this is only used when U-Boot itself diff --git a/boot/Kconfig b/boot/Kconfig index 945ef1ca13..ee0dc90e93 100644 --- a/boot/Kconfig +++ b/boot/Kconfig @@ -626,7 +626,7 @@ config BOOTSTAGE config SPL_BOOTSTAGE bool "Boot timing and reported in SPL" - depends on BOOTSTAGE + depends on BOOTSTAGE && SPL help Enable recording of boot time in SPL. To make this visible to U-Boot proper, enable BOOTSTAGE_STASH as well. This will stash the timing diff --git a/common/Kconfig b/common/Kconfig index f08a8e7493..e7914ca750 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -83,6 +83,7 @@ config LOGLEVEL config SPL_LOGLEVEL int + depends on SPL default LOGLEVEL config TPL_LOGLEVEL @@ -358,7 +359,7 @@ config LOG_SYSLOG config SPL_LOG bool "Enable logging support in SPL" - depends on LOG + depends on LOG && SPL help This enables support for logging of status and debug messages. These can be displayed on the console, recorded in a memory buffer, or diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig index 18ec990fe3..5ffa294482 100644 --- a/configs/at91sam9n12ek_nandflash_defconfig +++ b/configs/at91sam9n12ek_nandflash_defconfig @@ -48,9 +48,7 @@ CONFIG_AT91_GPIO=y CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y CONFIG_NAND_ATMEL=y -CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y -CONFIG_SYS_NAND_PAGE_SIZE=0x800 -CONFIG_SYS_NAND_OOBSIZE=0x40 +CONFIG_ATMEL_NAND_HW_PMECC=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/at91sam9x5ek_dataflash_defconfig b/configs/at91sam9x5ek_dataflash_defconfig index 6e36b60ce0..da37fb507a 100644 --- a/configs/at91sam9x5ek_dataflash_defconfig +++ b/configs/at91sam9x5ek_dataflash_defconfig @@ -55,9 +55,7 @@ CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y CONFIG_NAND_ATMEL=y -CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y -CONFIG_SYS_NAND_PAGE_SIZE=0x800 -CONFIG_SYS_NAND_OOBSIZE=0x40 +CONFIG_ATMEL_NAND_HW_PMECC=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig index a32eb130f1..9d581734f9 100644 --- a/configs/at91sam9x5ek_nandflash_defconfig +++ b/configs/at91sam9x5ek_nandflash_defconfig @@ -54,9 +54,7 @@ CONFIG_AT91_GPIO=y CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y CONFIG_NAND_ATMEL=y -CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y -CONFIG_SYS_NAND_PAGE_SIZE=0x800 -CONFIG_SYS_NAND_OOBSIZE=0x40 +CONFIG_ATMEL_NAND_HW_PMECC=y CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/sama5d36ek_cmp_nandflash_defconfig b/configs/sama5d36ek_cmp_nandflash_defconfig index 0139ebefe2..2fd58b07bd 100644 --- a/configs/sama5d36ek_cmp_nandflash_defconfig +++ b/configs/sama5d36ek_cmp_nandflash_defconfig @@ -53,11 +53,9 @@ CONFIG_AT91_GPIO=y CONFIG_GENERIC_ATMEL_MCI=y CONFIG_MTD=y CONFIG_NAND_ATMEL=y +CONFIG_ATMEL_NAND_HW_PMECC=y CONFIG_PMECC_CAP=4 -CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER=y CONFIG_SYS_NAND_ONFI_DETECTION=y -CONFIG_SYS_NAND_PAGE_SIZE=0x800 -CONFIG_SYS_NAND_OOBSIZE=0x40 CONFIG_DM_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 CONFIG_SPI_FLASH_ATMEL=y diff --git a/configs/socfpga_secu1_defconfig b/configs/socfpga_secu1_defconfig index 72cf0d1bc8..4a244e17bc 100644 --- a/configs/socfpga_secu1_defconfig +++ b/configs/socfpga_secu1_defconfig @@ -42,6 +42,7 @@ CONFIG_SPL_STACK=0x0 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x1 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION_TYPE is not set CONFIG_SPL_MTD_SUPPORT=y +CONFIG_SPL_NAND_SUPPORT=y CONFIG_SYS_MAXARGS=32 CONFIG_CMD_ASKENV=y CONFIG_CMD_GREPENV=y diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index f10d1aaf4b..eae1c8ddc9 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -3,7 +3,7 @@ config FIRMWARE config SPL_FIRMWARE bool "Enable Firmware driver support in SPL" - depends on FIRMWARE + depends on FIRMWARE && SPL config SPL_ARM_PSCI_FW bool diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 149a62ffe6..8ab22ed817 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -89,7 +89,7 @@ config DM_GPIO_LOOKUP_LABEL config SPL_DM_GPIO_LOOKUP_LABEL bool "Enable searching for gpio labelnames" - depends on DM_GPIO && SPL_DM && SPL_GPIO + depends on SPL_DM_GPIO help This option enables searching for gpio names in the defined gpio labels, if the search for the @@ -490,7 +490,7 @@ config DM_PCA953X config SPL_DM_PCA953X bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports in SPL" - depends on DM_GPIO + depends on SPL_DM_GPIO help Say yes here to provide access to several register-oriented SMBus I/O expanders, made mostly by NXP or TI. Compatible diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig index 39683fc43b..323c4fbe9c 100644 --- a/drivers/i2c/muxes/Kconfig +++ b/drivers/i2c/muxes/Kconfig @@ -9,7 +9,7 @@ config I2C_MUX config SPL_I2C_MUX bool "Support I2C multiplexers on SPL" - depends on I2C_MUX + depends on SPL && I2C_MUX help This enables I2C buses to be multiplexed, so that you can select one of several buses using some sort of control mechanism. The diff --git a/drivers/led/Kconfig b/drivers/led/Kconfig index 418ed215c5..ccdd7d7395 100644 --- a/drivers/led/Kconfig +++ b/drivers/led/Kconfig @@ -67,7 +67,7 @@ config LED_BLINK config SPL_LED bool "Enable LED support in SPL" - depends on SPL && SPL_DM + depends on SPL_DM help The LED subsystem adds a small amount of overhead to the image. If this is acceptable and you have a need to use LEDs in SPL, @@ -85,7 +85,7 @@ config LED_GPIO config SPL_LED_GPIO bool "LED support for GPIO-connected LEDs in SPL" - depends on SPL_LED && DM_GPIO + depends on SPL_LED && SPL_DM_GPIO help This option is an SPL-variant of the LED_GPIO option. See the help of LED_GPIO for details. diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index b44cd98150..fd44421931 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -123,6 +123,7 @@ config MMC_IO_VOLTAGE config SPL_MMC_IO_VOLTAGE bool "Support IO voltage configuration in SPL" + depends on SPL_MMC help IO voltage configuration allows selecting the voltage level of the IO lines (not the level of main supply). This is required for UHS @@ -153,6 +154,7 @@ config MMC_HS400_ES_SUPPORT config SPL_MMC_HS400_ES_SUPPORT bool "enable HS400 Enhanced Strobe support in SPL" + depends on SPL_MMC help The HS400 Enhanced Strobe mode is support by some eMMC. The bus frequency is up to 200MHz. This mode does not tune the IO. @@ -166,6 +168,7 @@ config MMC_HS400_SUPPORT config SPL_MMC_HS400_SUPPORT bool "enable HS400 support in SPL" + depends on SPL_MMC select SPL_MMC_HS200_SUPPORT help The HS400 mode is support by some eMMC. The bus frequency is up to @@ -179,6 +182,7 @@ config MMC_HS200_SUPPORT config SPL_MMC_HS200_SUPPORT bool "enable HS200 support in SPL" + depends on SPL_MMC help The HS200 mode is support by some eMMC. The bus frequency is up to 200MHz. This mode requires tuning the IO. @@ -478,7 +482,7 @@ config MMC_SDHCI_ADMA config SPL_MMC_SDHCI_ADMA bool "Support SDHCI ADMA2 in SPL" - depends on MMC_SDHCI + depends on SPL_MMC && MMC_SDHCI select MMC_SDHCI_ADMA_HELPERS help This enables support for the ADMA (Advanced DMA) defined diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 4129a33866..190300fc17 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -73,6 +73,7 @@ config PMECC_SECTOR_SIZE config SPL_GENERATE_ATMEL_PMECC_HEADER bool "Atmel PMECC Header Generation" + depends on SPL select ATMEL_NAND_HWECC select ATMEL_NAND_HW_PMECC help @@ -647,7 +648,7 @@ config SYS_NAND_U_BOOT_OFFS_REDUND config SPL_NAND_AM33XX_BCH bool "Enables SPL-NAND driver which supports ELM based" - depends on NAND_OMAP_GPMC && !OMAP34XX + depends on SPL_NAND_SUPPORT && NAND_OMAP_GPMC && !OMAP34XX default y help Hardware ECC correction. This is useful for platforms which have ELM @@ -658,6 +659,7 @@ config SPL_NAND_AM33XX_BCH config SPL_NAND_DENALI bool "Support Denali NAND controller for SPL" + depends on SPL_NAND_SUPPORT help This is a small implementation of the Denali NAND controller for use on SPL. @@ -673,7 +675,7 @@ config NAND_DENALI_SPARE_AREA_SKIP_BYTES config SPL_NAND_SIMPLE bool "Use simple SPL NAND driver" - depends on !SPL_NAND_AM33XX_BCH + depends on !SPL_NAND_AM33XX_BCH && SPL_NAND_SUPPORT help Support for NAND boot using simple NAND drivers that expose the cmd_ctrl() interface. diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index f350c7e5dc..f83876c576 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -248,7 +248,7 @@ config SPI_FLASH_MTD config SPL_SPI_FLASH_MTD bool "SPI flash MTD support for SPL" - depends on SPI_FLASH + depends on SPI_FLASH && SPL help Enable the MTD support for the SPI flash layer in SPL. diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig index 2c20dc7c83..0af53a6c67 100644 --- a/drivers/power/Kconfig +++ b/drivers/power/Kconfig @@ -29,6 +29,7 @@ config POWER_LEGACY config SPL_POWER_LEGACY bool "Legacy power support in SPL" + depends on SPL && !SPL_DM_PMIC default y if POWER_LEGACY help Note: This is a legacy option. Use SPL_DM_PMIC instead. diff --git a/drivers/power/acpi_pmc/Kconfig b/drivers/power/acpi_pmc/Kconfig index 355d1618c6..629acb0714 100644 --- a/drivers/power/acpi_pmc/Kconfig +++ b/drivers/power/acpi_pmc/Kconfig @@ -8,6 +8,7 @@ config ACPI_PMC config SPL_ACPI_PMC bool "Power Manager (x86 PMC) support in SPL" + depends on SPL default y if ACPI_PMC help Enable support for an x86-style power-management controller which diff --git a/drivers/power/regulator/Kconfig b/drivers/power/regulator/Kconfig index d6cea8ec66..c519e066ef 100644 --- a/drivers/power/regulator/Kconfig +++ b/drivers/power/regulator/Kconfig @@ -55,7 +55,7 @@ config DM_REGULATOR_BD71837 config SPL_DM_REGULATOR_BD71837 bool "Enable Driver Model for ROHM BD71837/BD71847 regulators in SPL" - depends on DM_REGULATOR_BD71837 + depends on DM_REGULATOR_BD71837 && SPL help This config enables implementation of driver-model regulator uclass features for regulators on ROHM BD71837 and BD71847 in SPL. @@ -70,7 +70,7 @@ config DM_REGULATOR_PCA9450 config SPL_DM_REGULATOR_PCA9450 bool "Enable Driver Model for NXP PCA9450 regulators in SPL" - depends on DM_REGULATOR_PCA9450 + depends on DM_REGULATOR_PCA9450 && SPL help This config enables implementation of driver-model regulator uclass features for regulators on ROHM PCA9450 in SPL. @@ -115,7 +115,7 @@ config REGULATOR_PWM config SPL_REGULATOR_PWM bool "Enable Driver for PWM regulators in SPL" - depends on REGULATOR_PWM + depends on REGULATOR_PWM && SPL help This config enables implementation of driver-model regulator uclass features for PWM regulators in SPL. @@ -163,7 +163,7 @@ config DM_REGULATOR_FIXED config SPL_DM_REGULATOR_FIXED bool "Enable Driver Model for REGULATOR Fixed value in SPL" - depends on DM_REGULATOR_FIXED + depends on DM_REGULATOR_FIXED && SPL select SPL_DM_REGULATOR_COMMON ---help--- This config enables implementation of driver-model regulator uclass @@ -345,7 +345,7 @@ config SPL_DM_REGULATOR_STPMIC1 config SPL_DM_REGULATOR_PALMAS bool "Enable driver for PALMAS PMIC regulators" - depends on SPL_PMIC_PALMAS + depends on SPL_PMIC_PALMAS help This enables implementation of driver-model regulator uclass features for REGULATOR PALMAS and the family of PALMAS PMICs. @@ -353,7 +353,7 @@ config SPL_DM_REGULATOR_PALMAS config SPL_DM_REGULATOR_LP87565 bool "Enable driver for LP87565 PMIC regulators" - depends on SPL_PMIC_LP87565 + depends on SPL_PMIC_LP87565 help This enables implementation of driver-model regulator uclass features for REGULATOR LP87565 and the family of LP87565 PMICs. diff --git a/fs/cbfs/Kconfig b/fs/cbfs/Kconfig index 03980d830d..b6639928f4 100644 --- a/fs/cbfs/Kconfig +++ b/fs/cbfs/Kconfig @@ -9,6 +9,7 @@ config FS_CBFS config SPL_FS_CBFS bool "Enable CBFS (Coreboot Filesystem) in SPL" + depends on SPL help Define this to enable support for reading from a Coreboot filesystem. This is a ROM-based filesystem used for accessing files diff --git a/lib/Kconfig b/lib/Kconfig index c9f9ddce7d..7dd777b56a 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -239,6 +239,7 @@ config GENERATE_ACPI_TABLE config SPL_TINY_MEMSET bool "Use a very small memset() in SPL" + depends on SPL help The faster memset() is the arch-specific one (if available) enabled by CONFIG_USE_ARCH_MEMSET. If that is not enabled, we can still get @@ -557,6 +558,7 @@ config MD5 config SPL_MD5 bool "Support MD5 algorithm in SPL" + depends on SPL help This option enables MD5 support in SPL. MD5 is an algorithm designed in 1991 that produces a 16-byte digest (or checksum) from its input @@ -643,6 +645,7 @@ config ZSTD config SPL_LZ4 bool "Enable LZ4 decompression support in SPL" + depends on SPL help This enables support for the LZ4 decompression algorithm in SPL. LZ4 is a lossless data compression algorithm that is focused on @@ -651,6 +654,7 @@ config SPL_LZ4 config SPL_LZMA bool "Enable LZMA decompression support for SPL build" + depends on SPL help This enables support for LZMA compression algorithm for SPL boot. @@ -662,6 +666,7 @@ config VPL_LZMA config SPL_LZO bool "Enable LZO decompression support in SPL" + depends on SPL help This enables support for LZO compression algorithm in the SPL. @@ -678,6 +683,7 @@ config SPL_ZLIB config SPL_ZSTD bool "Enable Zstandard decompression support in SPL" + depends on SPL select XXHASH help This enables Zstandard decompression library in the SPL. @@ -750,7 +756,7 @@ config SPL_OF_LIBFDT config SPL_OF_LIBFDT_ASSUME_MASK hex "Mask of conditions to assume for libfdt" - depends on SPL_OF_LIBFDT || FIT + depends on SPL_OF_LIBFDT || (FIT && SPL) default 0xff help Use this to change the assumptions made by libfdt in SPL about the diff --git a/lib/crypto/Kconfig b/lib/crypto/Kconfig index 1c04a7ec5f..152eb2a9ca 100644 --- a/lib/crypto/Kconfig +++ b/lib/crypto/Kconfig @@ -28,7 +28,7 @@ config ASYMMETRIC_PUBLIC_KEY_SUBTYPE config SPL_ASYMMETRIC_PUBLIC_KEY_SUBTYPE bool "Asymmetric public-key crypto algorithm subtype within SPL" - depends on ASYMMETRIC_PUBLIC_KEY_SUBTYPE + depends on ASYMMETRIC_PUBLIC_KEY_SUBTYPE && SPL help This option provides support for asymmetric public key type handling in the SPL. If signature generation and/or verification are to be used, @@ -48,7 +48,7 @@ config RSA_PUBLIC_KEY_PARSER config SPL_RSA_PUBLIC_KEY_PARSER bool "RSA public key parser within SPL" - depends on ASYMMETRIC_PUBLIC_KEY_SUBTYPE + depends on ASYMMETRIC_PUBLIC_KEY_SUBTYPE && SPL select SPL_ASN1_DECODER select ASN1_COMPILER select SPL_OID_REGISTRY diff --git a/lib/ecdsa/Kconfig b/lib/ecdsa/Kconfig index a95c4ff581..5c3d67d814 100644 --- a/lib/ecdsa/Kconfig +++ b/lib/ecdsa/Kconfig @@ -17,6 +17,7 @@ config ECDSA_VERIFY config SPL_ECDSA_VERIFY bool "Enable ECDSA verification support in SPL" + depends on SPL help Allow ECDSA signatures to be recognized and verified in SPL. diff --git a/lib/rsa/Kconfig b/lib/rsa/Kconfig index b773f17c26..9033384e60 100644 --- a/lib/rsa/Kconfig +++ b/lib/rsa/Kconfig @@ -18,6 +18,7 @@ if RSA config SPL_RSA bool "Use RSA Library within SPL" + depends on SPL config SPL_RSA_VERIFY bool diff --git a/test/Kconfig b/test/Kconfig index 7f3447ae5a..9b283a57ba 100644 --- a/test/Kconfig +++ b/test/Kconfig @@ -8,6 +8,7 @@ menuconfig UNIT_TEST config SPL_UNIT_TEST bool "Unit tests in SPL" + depends on SPL # We need to be able to unbind devices for tests to work select SPL_DM_DEVICE_REMOVE help