From: Hans de Goede Date: Sat, 15 Apr 2023 18:23:40 +0000 (+0200) Subject: power: supply: bq25890: Call power_supply_changed() after updating input current... X-Git-Tag: baikal/aarch64/sdk6.2~39 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=86fd88db207c20b570f677a864e3b4258868f04c;p=kernel.git power: supply: bq25890: Call power_supply_changed() after updating input current or voltage commit ad3d9c779b1f09f3f3a6fefd07af407c7bc7c9a7 upstream. The bq25892 model relies on external charger-type detection and once that is done the bq25890_charger code will update the input current and if pumpexpress is used also the input voltage. In this case, when the initial power_supply_changed() call is made from the interrupt handler, the input settings are 5V/0.5A which on many devices is not enough power to charge (while the device is on). On many devices the fuel-gauge relies in its external_power_changed callback to timely signal userspace about charging <-> discharging status changes. Add a power_supply_changed() call after updating the input current or voltage. This allows the fuel-gauge driver to timely recheck if the battery is charging after the new input settings have been applied and then it can immediately notify userspace about this. Fixes: 2023dd163da2 ("power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol") Fixes: c79dce5ba4b5 ("power: supply: bq25890: On the bq25892 set the IINLIM based on external charger detection") Signed-off-by: Hans de Goede Signed-off-by: Sebastian Reichel Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c index f9ee843c8082f..ee6e28f1d52dc 100644 --- a/drivers/power/supply/bq25890_charger.c +++ b/drivers/power/supply/bq25890_charger.c @@ -675,6 +675,7 @@ static void bq25890_charger_external_power_changed(struct power_supply *psy) } bq25890_field_write(bq, F_IINLIM, input_current_limit); + power_supply_changed(psy); } static int bq25890_get_chip_state(struct bq25890_device *bq, @@ -973,6 +974,8 @@ static void bq25890_pump_express_work(struct work_struct *data) dev_info(bq->dev, "Hi-voltage charging requested, input voltage is %d mV\n", voltage); + power_supply_changed(bq->charger); + return; error_print: bq25890_field_write(bq, F_PUMPX_EN, 0);