From: Peng Fan <peng.fan@nxp.com>
Date: Thu, 5 May 2022 11:06:11 +0000 (+0800)
Subject: imx: verdin-imx8mm/p: cleanup board watchdog code
X-Git-Tag: baikal/mips/sdk5.9~3^2~48^2~29
X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=6f33cbc44c021a5067f37223a750dc9d65bba8c4;p=uboot.git

imx: verdin-imx8mm/p: cleanup board watchdog code

pinctrl_wdog already marked u-boot,dm-spl, so clean up board code.

The set_wdog_reset() function is not necessary as this is handled by
the imx_watchdog.c driver due to the 'fsl,ext-reset-output' property
being set.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---

diff --git a/board/toradex/verdin-imx8mp/verdin-imx8mp.c b/board/toradex/verdin-imx8mp/verdin-imx8mp.c
index 8334c9bb37..e3c1a1201d 100644
--- a/board/toradex/verdin-imx8mp/verdin-imx8mp.c
+++ b/board/toradex/verdin-imx8mp/verdin-imx8mp.c
@@ -24,7 +24,6 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #define UART_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_FSEL1)
-#define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
 
 /* Verdin UART_3, Console/Debug UART */
 static const iomux_v3_cfg_t uart_pads[] = {
@@ -32,18 +31,8 @@ static const iomux_v3_cfg_t uart_pads[] = {
 	MX8MP_PAD_UART3_TXD__UART3_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
 };
 
-static const iomux_v3_cfg_t wdog_pads[] = {
-	MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
-};
-
 int board_early_init_f(void)
 {
-	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
-
-	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
-
-	set_wdog_reset(wdog);
-
 	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
 
 	init_uart_clk(2);