From: Ilpo Järvinen Date: Fri, 24 Jun 2022 20:42:07 +0000 (+0300) Subject: serial: 8250_lpss: Use 32-bit reads X-Git-Tag: baikal/mips/sdk6.1~5078^2~60 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=5ecd006980b7fc4d332bf4636b2185ac25c1a3c5;p=kernel.git serial: 8250_lpss: Use 32-bit reads Use 32-bit reads in order to not lose higher bits of DW UART regs. This change does not fix any known issue as the high bits are not used for anything related to 8250 driver (dw8250_readl_ext and dw8250_writel_ext used within the dwlib are already doing readl/writel/ioread32be/iowrite32be anyway). This change is necessary to enables 9th bit address mode. DW UART reports address frames with BIT(8) of LSR. Reviewed-by: Andy Shevchenko Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220624204210.11112-4-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c index 0f5af061e0b45..4ba43bef99336 100644 --- a/drivers/tty/serial/8250/8250_lpss.c +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -330,7 +330,7 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) uart.port.irq = pci_irq_vector(pdev, 0); uart.port.private_data = &lpss->data; uart.port.type = PORT_16550A; - uart.port.iotype = UPIO_MEM; + uart.port.iotype = UPIO_MEM32; uart.port.regshift = 2; uart.port.uartclk = lpss->board->base_baud * 16; uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE;