From: Michael Walle Date: Mon, 15 Nov 2021 22:45:47 +0000 (+0100) Subject: board: sl28: enable sl28cpld support X-Git-Tag: baikal/mips/sdk5.9~7^2^2~38^2~7 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=5517cba20d67a80377f5710556262b8edbedfd78;p=uboot.git board: sl28: enable sl28cpld support Enable the GPIO and watchdog driver. Don't start the watchdog automatically, though. Signed-off-by: Michael Walle Reviewed-by: Priyanka Jain --- diff --git a/configs/kontron_sl28_defconfig b/configs/kontron_sl28_defconfig index b61276cf1d..a0c0c3c6a1 100644 --- a/configs/kontron_sl28_defconfig +++ b/configs/kontron_sl28_defconfig @@ -42,12 +42,14 @@ CONFIG_CMD_GREPENV=y CONFIG_CMD_NVEDIT_EFI=y CONFIG_CMD_DFU=y CONFIG_CMD_DM=y +CONFIG_CMD_GPIO=y CONFIG_CMD_GPT=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PCI=y CONFIG_CMD_USB=y CONFIG_CMD_USB_MASS_STORAGE=y +CONFIG_CMD_WDT=y CONFIG_CMD_CACHE=y CONFIG_CMD_EFIDEBUG=y CONFIG_CMD_RNG=y @@ -69,8 +71,10 @@ CONFIG_DDR_ECC=y CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y CONFIG_DFU_MMC=y CONFIG_DFU_SF=y +CONFIG_SL28CPLD_GPIO=y CONFIG_I2C_SET_DEFAULT_BUS_NUM=y CONFIG_I2C_MUX=y +CONFIG_SL28CPLD=y CONFIG_MMC_HS400_SUPPORT=y CONFIG_FSL_ESDHC=y CONFIG_FSL_ESDHC_SUPPORT_ADMA2=y @@ -102,6 +106,10 @@ CONFIG_USB_DWC3=y CONFIG_USB_DWC3_LAYERSCAPE=y CONFIG_USB_GADGET=y CONFIG_USB_GADGET_DOWNLOAD=y +# CONFIG_WATCHDOG is not set +# CONFIG_WATCHDOG_AUTOSTART is not set +CONFIG_WDT=y +CONFIG_WDT_SL28CPLD=y CONFIG_OF_LIBFDT_ASSUME_MASK=0x0 CONFIG_OF_LIBFDT_OVERLAY=y CONFIG_EFI_SET_TIME=y