From: Vignesh Raghavendra Date: Wed, 8 Mar 2023 04:12:57 +0000 (+0530) Subject: dma: ti: k3-udma: Fix channel hang on teardown X-Git-Tag: baikal/mips/sdk5.8.2~5^2~15^2 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=29aa53608a0253e9e6ca8e3644ebb95f71a800de;p=uboot.git dma: ti: k3-udma: Fix channel hang on teardown Setting RX flow error handling will stall the channel until descriptors are available to move RX data. Setting this bit causes issues when tearing down ethernet DMA channel at the end of TFTP transfer as unrelated network packets can cause teardown to stall indefinitely waiting for driver to queue add more desc leading to channel hang with error logs: udma_stop_dev2mem TIMEOUT ! udma_stop_dev2mem: peer not stopped TIMEOUT ! udma_stop_dev2mem TIMEOUT ! Fix this by clearing rx_error_handling similar to how its done for UDMA as part of udma_alloc_rchan_sci_req() This fixes occasional TFTP Failures seen when downloading multiple files one after the other on AM64/AM62 SoCs. Fixes: 1dfb71468d59 ("dma: ti: k3-udma: Add BCDMA and PKTDMA support") Reported-by: Nishanth Menon Signed-off-by: Vignesh Raghavendra --- diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c index d92b964436..05c3a4311c 100644 --- a/drivers/dma/ti/k3-udma.c +++ b/drivers/dma/ti/k3-udma.c @@ -2150,7 +2150,7 @@ static int pktdma_tisci_rx_channel_config(struct udma_chan *uc) flow_req.rx_psinfo_present = 1; else flow_req.rx_psinfo_present = 0; - flow_req.rx_error_handling = 1; + flow_req.rx_error_handling = 0; ret = tisci_ops->rx_flow_cfg(tisci_rm->tisci, &flow_req);