From: Simon Glass Date: Sun, 23 Jan 2022 14:04:08 +0000 (-0700) Subject: video: Drop references to CONFIG_VIDEO et al X-Git-Tag: baikal/mips/sdk5.9~3^2~124^2~6^2~8 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=28c230cadcbb;p=uboot.git video: Drop references to CONFIG_VIDEO et al Drop the Kconfigs which are not used and all references to them. In particular, this drops CONFIG_VIDEO to avoid confusion and allow us to eventually rename CONFIG_DM_VIDEO to CONFIG_VIDEO. Also drop the prototype for video_get_info_str() which is no-longer used. Signed-off-by: Simon Glass Acked-by: Jason Liu --- diff --git a/README b/README index 1a413bf346..138de72ffc 100644 --- a/README +++ b/README @@ -977,9 +977,6 @@ The following options need to be configured: support, and should also define these other macros: CONFIG_SYS_DIU_ADDR - CONFIG_VIDEO - CONFIG_VIDEO_SW_CURSOR - CONFIG_VGA_AS_SINGLE_DEVICE The DIU driver will look for the 'video-mode' environment variable, and if defined, enable the DIU as a console during diff --git a/arch/arm/include/asm/mach-imx/mx5_video.h b/arch/arm/include/asm/mach-imx/mx5_video.h index dc6aa00c89..b55c0fe897 100644 --- a/arch/arm/include/asm/mach-imx/mx5_video.h +++ b/arch/arm/include/asm/mach-imx/mx5_video.h @@ -6,12 +6,7 @@ #ifndef __MX5_VIDEO_H #define __MX5_VIDEO_H -#ifdef CONFIG_VIDEO -void lcd_enable(void); -void setup_iomux_lcd(void); -#else static inline void lcd_enable(void) { } static inline void setup_iomux_lcd(void) { } -#endif #endif diff --git a/arch/arm/mach-nexell/include/mach/display_dev.h b/arch/arm/mach-nexell/include/mach/display_dev.h index ffa45518d9..f24fb1739c 100644 --- a/arch/arm/mach-nexell/include/mach/display_dev.h +++ b/arch/arm/mach-nexell/include/mach/display_dev.h @@ -8,15 +8,12 @@ #ifndef _NX__DISPLAY_DEV_H_ #define _NX__DISPLAY_DEV_H_ -#if defined CONFIG_VIDEO || defined CONFIG_DM_VIDEO -#elif defined CONFIG_LCD +#if !defined(CONFIG_DM_VIDEO) && defined(CONFIG_LCD) #include #endif struct nx_display_dev { -#if defined CONFIG_DM_VIDEO - /* GraphicDevice graphic_device; -- not defined anymore */ -#elif defined CONFIG_LCD +#if !defined(CONFIG_DM_VIDEO) && defined(CONFIG_LCD) vidinfo_t *panel_info; #endif unsigned long base; diff --git a/board/freescale/mx51evk/Makefile b/board/freescale/mx51evk/Makefile index 1a9581cabf..808e35015e 100644 --- a/board/freescale/mx51evk/Makefile +++ b/board/freescale/mx51evk/Makefile @@ -5,4 +5,3 @@ # (C) Copyright 2009 Freescale Semiconductor, Inc. obj-y += mx51evk.o -obj-$(CONFIG_VIDEO) += mx51evk_video.o diff --git a/board/freescale/mx53loco/Makefile b/board/freescale/mx53loco/Makefile index d2ebd94dca..9befe42695 100644 --- a/board/freescale/mx53loco/Makefile +++ b/board/freescale/mx53loco/Makefile @@ -4,4 +4,3 @@ # Jason Liu obj-y += mx53loco.o -obj-$(CONFIG_VIDEO) += mx53loco_video.o diff --git a/board/kosagi/novena/novena_spl.c b/board/kosagi/novena/novena_spl.c index 3d22f2019e..24c0fb2226 100644 --- a/board/kosagi/novena/novena_spl.c +++ b/board/kosagi/novena/novena_spl.c @@ -379,30 +379,7 @@ static void novena_spl_setup_iomux_uart(void) imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads)); } -/* - * Video - */ -#ifdef CONFIG_VIDEO -static iomux_v3_cfg_t hdmi_pads[] = { - /* "Ghost HPD" pin */ - MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), - - /* LCD_PWR_CTL */ - MX6_PAD_CSI0_DAT10__GPIO5_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL), - /* LCD_BL_ON */ - MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL), - /* GPIO_PWM1 */ - MX6_PAD_DISP0_DAT8__GPIO4_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static void novena_spl_setup_iomux_video(void) -{ - imx_iomux_v3_setup_multiple_pads(hdmi_pads, ARRAY_SIZE(hdmi_pads)); - gpio_direction_input(NOVENA_HDMI_GHOST_HPD); -} -#else static inline void novena_spl_setup_iomux_video(void) {} -#endif /* * SPL boots from uSDHC card diff --git a/cmd/Kconfig b/cmd/Kconfig index 25c9fde4a7..1d8401236f 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1786,7 +1786,7 @@ config CMD_CONITRACE config CMD_CLS bool "Enable clear screen command 'cls'" - depends on CFB_CONSOLE || DM_VIDEO || LCD || VIDEO + depends on DM_VIDEO || LCD || VIDEO default y if LCD help Enable the 'cls' command which clears the screen contents diff --git a/cmd/bdinfo.c b/cmd/bdinfo.c index c56b3f4f6e..37cd8a57eb 100644 --- a/cmd/bdinfo.c +++ b/cmd/bdinfo.c @@ -117,7 +117,7 @@ int do_bdinfo(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]) bdinfo_print_num_l("fdt_size", (ulong)gd->fdt_size); if (IS_ENABLED(CONFIG_DM_VIDEO)) show_video_info(); -#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO) +#if defined(CONFIG_LCD) bdinfo_print_num_l("FB base ", gd->fb_base); #endif #if CONFIG_IS_ENABLED(MULTI_DTB_FIT) diff --git a/cmd/bmp.c b/cmd/bmp.c index 071ba90b43..45f4c1296d 100644 --- a/cmd/bmp.c +++ b/cmd/bmp.c @@ -268,10 +268,8 @@ int bmp_display(ulong addr, int x, int y) } #elif defined(CONFIG_LCD) ret = lcd_display_bitmap(addr, x, y); -#elif defined(CONFIG_VIDEO) - ret = video_display_bitmap(addr, x, y); #else -# error bmp_display() requires CONFIG_LCD or CONFIG_VIDEO +# error bmp_display() requires CONFIG_LCD #endif if (bmp_alloc_addr) diff --git a/common/fdt_support.c b/common/fdt_support.c index ea18ea3f04..8662bd27a4 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -1725,7 +1725,7 @@ int fdt_set_status_by_pathf(void *fdt, enum fdt_status status, const char *fmt, return fdt_set_node_status(fdt, offset, status); } -#if defined(CONFIG_VIDEO) || defined(CONFIG_LCD) +#if defined(CONFIG_LCD) int fdt_add_edid(void *blob, const char *compat, unsigned char *edid_buf) { int noff; diff --git a/common/stdio.c b/common/stdio.c index 97f21ea346..92161a0df8 100644 --- a/common/stdio.c +++ b/common/stdio.c @@ -367,8 +367,7 @@ int stdio_add_devices(void) } else { if (IS_ENABLED(CONFIG_LCD)) drv_lcd_init(); - if (IS_ENABLED(CONFIG_VIDEO) || - IS_ENABLED(CONFIG_VIDEO_VCXK)) + if (IS_ENABLED(CONFIG_VIDEO_VCXK)) drv_video_init(); } diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index c8c85c6927..d0745463b9 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -708,39 +708,9 @@ config VIDEO model. Video drivers typically provide a colour text console and cursor. -config VGA_AS_SINGLE_DEVICE - bool "Set the video as an output-only device" - depends on CFB_CONSOLE - default y - help - If enable the framebuffer device will be initialized as an - output-only device. The Keyboard driver will not be set up. This - may be used if you have no keyboard device, or more than one - (USB Keyboard, AT Keyboard). - -config VIDEO_SW_CURSOR - bool "Enable a software cursor" - depends on CFB_CONSOLE - default y if CFB_CONSOLE - help - This draws a cursor after the last character. No blinking is - provided. This makes it possible to see the current cursor - position when entering text on the console. It is recommended to - enable this. - -config CONSOLE_EXTRA_INFO - bool "Display additional board information" - depends on CFB_CONSOLE - help - Display additional board information strings that normally go to - the serial port. When this option is enabled, a board-specific - function video_get_info_str() is called to get the string for - each line of the display. The function should return the string, - which can be empty if there is nothing to display for that line. - config CONSOLE_SCROLL_LINES int "Number of lines to scroll the console by" - depends on CFB_CONSOLE || DM_VIDEO || LCD + depends on DM_VIDEO || LCD default 1 help When the console need to be scrolled, this is the number of @@ -748,28 +718,6 @@ config CONSOLE_SCROLL_LINES console jump but can help speed up operation when scrolling is slow. -config SYS_CONSOLE_BG_COL - hex "Background colour" - depends on CFB_CONSOLE - default 0x00 - help - Defines the background colour for the console. The value is from - 0x00 to 0xff and the meaning depends on the graphics card. - Typically, 0x00 means black and 0xff means white. Do not set - the background and foreground to the same colour or you will see - nothing. - -config SYS_CONSOLE_FG_COL - hex "Foreground colour" - depends on CFB_CONSOLE - default 0xa0 - help - Defines the foreground colour for the console. The value is from - 0x00 to 0xff and the meaning depends on the graphics card. - Typically, 0x00 means black and 0xff means white. Do not set - the background and foreground to the same colour or you will see - nothing. - config LCD bool "Enable legacy LCD support" help @@ -967,7 +915,7 @@ config VIDEO_BMP_GZIP config VIDEO_BMP_RLE8 bool "Run length encoded BMP image (RLE8) support" - depends on DM_VIDEO || CFB_CONSOLE + depends on DM_VIDEO help If this option is set, the 8-bit RLE compressed BMP images is supported. diff --git a/drivers/video/nexell_display.c b/drivers/video/nexell_display.c index 0a9cea680f..090fd6ea32 100644 --- a/drivers/video/nexell_display.c +++ b/drivers/video/nexell_display.c @@ -562,7 +562,6 @@ static int nx_display_probe(struct udevice *dev) } struct nx_display_dev *dp; - /* unsigned int pp_index = 0; */ dp = nx_display_setup(); if (!dp) { @@ -572,9 +571,7 @@ static int nx_display_probe(struct udevice *dev) } switch (dp->depth) { -#if 0 /* GDF_16BIT_565RGB is not defined in video.h */ case 2: - pp_index = GDF_16BIT_565RGB; uc_priv->bpix = VIDEO_BPP16; break; case 3: @@ -582,10 +579,8 @@ static int nx_display_probe(struct udevice *dev) * type video_log2_bpp */ case 4: - pp_index = GDF_32BIT_X888RGB; uc_priv->bpix = VIDEO_BPP32; break; -#endif default: printf("fail : not support LCD bit per pixel %d\n", dp->depth * 8); @@ -598,8 +593,7 @@ static int nx_display_probe(struct udevice *dev) /* * set environment variable "fb_addr" (frame buffer address), required - * for splash image. Because drv_video_init() in common/stdio.c is only - * called when CONFIG_VIDEO is set (and not if CONFIG_DM_VIDEO is set). + * for splash image, which is not set if CONFIG_DM_VIDEO is enabled). */ sprintf(addr, "0x%x", dp->fb_addr); debug("%s(): env_set(\"fb_addr\", %s) ...\n", __func__, addr); diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index e49f5bf2f7..beb8bb90a6 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -67,7 +67,7 @@ struct global_data { * @mem_clk: memory clock rate in Hz */ unsigned long mem_clk; -#if defined(CONFIG_LCD) || defined(CONFIG_VIDEO) || defined(CONFIG_DM_VIDEO) +#if defined(CONFIG_LCD) || defined(CONFIG_DM_VIDEO) /** * @fb_base: base address of frame buffer memory */ diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index 6cd7929db3..7272470d12 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -74,11 +74,4 @@ #endif #endif /* CONFIG_SPL_BUILD */ -#if defined(CONFIG_VIDEO) -#define CONFIG_VIDEO_DA8XX -#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE -#define PWM_TICKS 0x1388 -#define PWM_DUTY 0x200 -#endif - #endif /* ! __CONFIG_PXM2_H */ diff --git a/include/configs/rut.h b/include/configs/rut.h index 410c6d379c..b30b12af52 100644 --- a/include/configs/rut.h +++ b/include/configs/rut.h @@ -67,13 +67,4 @@ #endif /* CONFIG_SPL_BUILD */ -#if defined(CONFIG_VIDEO) -#define CONFIG_VIDEO_DA8XX -#define DA8XX_LCD_CNTL_BASE LCD_CNTL_BASE - -#define BOARD_LCD_RESET 115 /* Bank 3 pin 19 */ -#define CONFIG_FORMIKE -#define DISPL_PLL_SPREAD_SPECTRUM -#endif - #endif /* ! __CONFIG_RUT_H */ diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig index e5e35fe51f..28657f50c9 100644 --- a/lib/efi_loader/Kconfig +++ b/lib/efi_loader/Kconfig @@ -18,7 +18,6 @@ config EFI_LOADER select PARTITION_UUIDS select HAVE_BLOCK_DEVICE select REGEX - imply CFB_CONSOLE_ANSI imply FAT imply FAT_WRITE imply USB_KEYBOARD_FN_KEYS