From: Svyatoslav Ryhel Date: Tue, 14 Feb 2023 17:35:32 +0000 (+0200) Subject: ARM: tegra: create common pre-dm i2c write X-Git-Tag: baikal/mips/sdk5.8.2~5^2~32^2~6 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=232508be4f1a93a8137081934257dfef0c60764b;p=uboot.git ARM: tegra: create common pre-dm i2c write This implementation allows pwr i2c writing on early SPL stages when DM is not yet setup. Such writing is needed to configure main voltages of PMIC on early SPL for bootloader to boot properly. Tested-by: Andreas Westman Dorcsak # ASUS TF T30 Tested-by: Robert Eckelmann # ASUS TF101 T20 Tested-by: Svyatoslav Ryhel # LG P895 T30 Tested-by: Thierry Reding # T30 and T124 Signed-off-by: Svyatoslav Ryhel Signed-off-by: Tom --- diff --git a/arch/arm/include/asm/arch-tegra/tegra_i2c.h b/arch/arm/include/asm/arch-tegra/tegra_i2c.h index c49f43251d..afec6bbdda 100644 --- a/arch/arm/include/asm/arch-tegra/tegra_i2c.h +++ b/arch/arm/include/asm/arch-tegra/tegra_i2c.h @@ -8,6 +8,7 @@ #ifndef _TEGRA_I2C_H_ #define _TEGRA_I2C_H_ +#include #include struct udevice; @@ -154,4 +155,20 @@ struct i2c_ctlr { */ int tegra_i2c_get_dvc_bus(struct udevice **busp); +/* Pre-dm section used for initial setup of PMIC */ +#define I2C_SEND_2_BYTES 0x0A02 + +static inline void tegra_i2c_ll_write(uint addr, uint data) +{ + struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE; + + writel(addr, ®->cmd_addr0); + writel(0x2, ®->cnfg); + + writel(data, ®->cmd_data1); + writel(I2C_SEND_2_BYTES, ®->cnfg); +} + +void pmic_enable_cpu_vdd(void); + #endif /* _TEGRA_I2C_H_ */ diff --git a/arch/arm/mach-tegra/cpu.h b/arch/arm/mach-tegra/cpu.h index d541825441..006aae3d07 100644 --- a/arch/arm/mach-tegra/cpu.h +++ b/arch/arm/mach-tegra/cpu.h @@ -74,4 +74,3 @@ int tegra_get_chip(void); int tegra_get_sku_info(void); int tegra_get_chip_sku(void); void adjust_pllp_out_freqs(void); -void pmic_enable_cpu_vdd(void); diff --git a/arch/arm/mach-tegra/tegra124/cpu.c b/arch/arm/mach-tegra/tegra124/cpu.c index d5f2683b26..b1bfe8fb5e 100644 --- a/arch/arm/mach-tegra/tegra124/cpu.c +++ b/arch/arm/mach-tegra/tegra124/cpu.c @@ -14,10 +14,14 @@ #include #include #include +#include #include #include #include "../cpu.h" +/* In case this function is not defined */ +__weak void pmic_enable_cpu_vdd(void) {} + /* Tegra124-specific CPU init code */ static void enable_cpu_power_rail(void) diff --git a/arch/arm/mach-tegra/tegra30/cpu.c b/arch/arm/mach-tegra/tegra30/cpu.c index 651edd27ee..6ac45af51a 100644 --- a/arch/arm/mach-tegra/tegra30/cpu.c +++ b/arch/arm/mach-tegra/tegra30/cpu.c @@ -15,23 +15,6 @@ #include #include "../cpu.h" -/* Tegra30-specific CPU init code */ -void tegra_i2c_ll_write_addr(uint addr, uint config) -{ - struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE; - - writel(addr, ®->cmd_addr0); - writel(config, ®->cnfg); -} - -void tegra_i2c_ll_write_data(uint data, uint config) -{ - struct i2c_ctlr *reg = (struct i2c_ctlr *)TEGRA_DVC_BASE; - - writel(data, ®->cmd_data1); - writel(config, ®->cnfg); -} - #define TPS62366A_I2C_ADDR 0xC0 #define TPS62366A_SET1_REG 0x01 #define TPS62366A_SET1_DATA (0x4600 | TPS62366A_SET1_REG) @@ -45,7 +28,9 @@ void tegra_i2c_ll_write_data(uint data, uint config) #define TPS65911_VDDCTRL_SR_REG 0x27 #define TPS65911_VDDCTRL_OP_DATA (0x2400 | TPS65911_VDDCTRL_OP_REG) #define TPS65911_VDDCTRL_SR_DATA (0x0100 | TPS65911_VDDCTRL_SR_REG) -#define I2C_SEND_2_BYTES 0x0A02 + +/* In case this function is not defined */ +__weak void pmic_enable_cpu_vdd(void) {} static void enable_cpu_power_rail(void) { @@ -59,12 +44,12 @@ static void enable_cpu_power_rail(void) /* Set VDD_CORE to 1.200V. */ #ifdef CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1 - tegra_i2c_ll_write_addr(TPS62366A_I2C_ADDR, 2); - tegra_i2c_ll_write_data(TPS62366A_SET1_DATA, I2C_SEND_2_BYTES); + tegra_i2c_ll_write(TPS62366A_I2C_ADDR, + TPS62366A_SET1_DATA); #endif #ifdef CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3 - tegra_i2c_ll_write_addr(TPS62361B_I2C_ADDR, 2); - tegra_i2c_ll_write_data(TPS62361B_SET3_DATA, I2C_SEND_2_BYTES); + tegra_i2c_ll_write(TPS62361B_I2C_ADDR, + TPS62361B_SET3_DATA); #endif udelay(1000); @@ -72,10 +57,11 @@ static void enable_cpu_power_rail(void) * Bring up CPU VDD via the TPS65911x PMIC on the DVC I2C bus. * First set VDD to 1.0125V, then enable the VDD regulator. */ - tegra_i2c_ll_write_addr(TPS65911_I2C_ADDR, 2); - tegra_i2c_ll_write_data(TPS65911_VDDCTRL_OP_DATA, I2C_SEND_2_BYTES); + tegra_i2c_ll_write(TPS65911_I2C_ADDR, + TPS65911_VDDCTRL_OP_DATA); udelay(1000); - tegra_i2c_ll_write_data(TPS65911_VDDCTRL_SR_DATA, I2C_SEND_2_BYTES); + tegra_i2c_ll_write(TPS65911_I2C_ADDR, + TPS65911_VDDCTRL_SR_DATA); udelay(10 * 1000); } @@ -142,6 +128,7 @@ void start_cpu(u32 reset_vector) /* Enable VDD_CPU */ enable_cpu_power_rail(); + pmic_enable_cpu_vdd(); set_cpu_running(0);