From: Ye Li Date: Tue, 31 Jan 2023 08:42:31 +0000 (+0800) Subject: imx8ulp_evk: Change to use DDR driver X-Git-Tag: baikal/mips/sdk6.2~4^2~3^2~175^2~16^2~74 X-Git-Url: https://git.baikalelectronics.ru/sdk/?a=commitdiff_plain;h=15d6ff26d50d1011cb037a0388c04a606ec30665;p=uboot.git imx8ulp_evk: Change to use DDR driver Remove the DDR initialization codes from board and enable the iMX8ULP DDR driver. Signed-off-by: Ye Li --- diff --git a/arch/arm/mach-imx/imx8ulp/Kconfig b/arch/arm/mach-imx/imx8ulp/Kconfig index bbdeaac07b..c1c1aa08c5 100644 --- a/arch/arm/mach-imx/imx8ulp/Kconfig +++ b/arch/arm/mach-imx/imx8ulp/Kconfig @@ -20,6 +20,7 @@ config TARGET_IMX8ULP_EVK bool "imx8ulp_evk" select IMX8ULP select SUPPORT_SPL + select IMX8ULP_DRAM endchoice diff --git a/board/freescale/imx8ulp_evk/Makefile b/board/freescale/imx8ulp_evk/Makefile index b6ca238de5..1cf148ab91 100644 --- a/board/freescale/imx8ulp_evk/Makefile +++ b/board/freescale/imx8ulp_evk/Makefile @@ -3,7 +3,7 @@ obj-y += imx8ulp_evk.o ifdef CONFIG_SPL_BUILD -obj-y += spl.o ddr_init.o +obj-y += spl.o ifdef CONFIG_IMX8ULP_ND_MODE obj-y += lpddr4_timing_264.o else diff --git a/board/freescale/imx8ulp_evk/ddr_init.c b/board/freescale/imx8ulp_evk/ddr_init.c deleted file mode 100644 index f4238d29b3..0000000000 --- a/board/freescale/imx8ulp_evk/ddr_init.c +++ /dev/null @@ -1,207 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/* - * Copyright 2021 NXP - */ -#include -#include -#include -#include -#include - -#define DENALI_CTL_00 (DDR_CTL_BASE_ADDR) -#define CTL_START 0x1 - -#define DENALI_CTL_03 (DDR_CTL_BASE_ADDR + 4 * 3) -#define DENALI_CTL_197 (DDR_CTL_BASE_ADDR + 4 * 197) -#define DENALI_CTL_250 (DDR_CTL_BASE_ADDR + 4 * 250) -#define DENALI_CTL_251 (DDR_CTL_BASE_ADDR + 4 * 251) -#define DENALI_CTL_266 (DDR_CTL_BASE_ADDR + 4 * 266) -#define DFI_INIT_COMPLETE 0x2 - -#define DENALI_CTL_614 (DDR_CTL_BASE_ADDR + 4 * 614) -#define DENALI_CTL_615 (DDR_CTL_BASE_ADDR + 4 * 615) - -#define DENALI_PI_00 (DDR_PI_BASE_ADDR) -#define PI_START 0x1 - -#define DENALI_PI_04 (DDR_PI_BASE_ADDR + 4 * 4) -#define DENALI_PI_11 (DDR_PI_BASE_ADDR + 4 * 11) -#define DENALI_PI_12 (DDR_PI_BASE_ADDR + 4 * 12) -#define DENALI_CTL_23 (DDR_CTL_BASE_ADDR + 4 * 23) -#define DENALI_CTL_25 (DDR_CTL_BASE_ADDR + 4 * 25) - -#define DENALI_PHY_1624 (DDR_PHY_BASE_ADDR + 4 * 1624) -#define DENALI_PHY_1537 (DDR_PHY_BASE_ADDR + 4 * 1537) -#define PHY_FREQ_SEL_MULTICAST_EN(X) ((X) << 8) -#define PHY_FREQ_SEL_INDEX(X) ((X) << 16) - -#define DENALI_PHY_1547 (DDR_PHY_BASE_ADDR + 4 * 1547) -#define DENALI_PHY_1555 (DDR_PHY_BASE_ADDR + 4 * 1555) -#define DENALI_PHY_1564 (DDR_PHY_BASE_ADDR + 4 * 1564) -#define DENALI_PHY_1565 (DDR_PHY_BASE_ADDR + 4 * 1565) - -int ddr_calibration(unsigned int fsp_table[3]) -{ - u32 reg_val; - u32 int_status_init, phy_freq_req, phy_freq_type; - u32 lock_0, lock_1, lock_2; - u32 freq_chg_pt, freq_chg_cnt; - - reg_val = readl(DENALI_CTL_250); - if (((reg_val >> 16) & 0x3) == 1) - freq_chg_cnt = 2; - else - freq_chg_cnt = 3; - - reg_val = readl(DENALI_PI_12); - if (reg_val == 0x3) { - freq_chg_pt = 1; - } else if (reg_val == 0x7) { - freq_chg_pt = 2; - } else { - printf("frequency map(0x%x) is wrong, please check!\r\n", reg_val); - return -1; - } - - debug("%s\n", __func__); - - /* Assert PI_START parameter and then assert START parameter in Controller. */ - reg_val = readl(DENALI_PI_00) | PI_START; - writel(reg_val, DENALI_PI_00); - - reg_val = readl(DENALI_CTL_00) | CTL_START; - writel(reg_val, DENALI_CTL_00); - - /* Poll for init_done_bit in Controller interrupt status register (INT_STATUS_INIT) */ - do { - if (!freq_chg_cnt) { - int_status_init = (readl(DENALI_CTL_266) >> 8) & 0xff; - /* DDR subsystem is ready for traffic. */ - if (int_status_init & DFI_INIT_COMPLETE) { - printf("complete\n"); - break; - } - } - - /* - * During leveling, PHY will request for freq change and SoC clock - * logic should provide requested frequency, Polling SIM LPDDR_CTRL2 - * Bit phy_freq_chg_req until be 1'b1 - */ - reg_val = readl(AVD_SIM_LPDDR_CTRL2); - phy_freq_req = (reg_val >> 7) & 0x1; - - if (phy_freq_req) { - phy_freq_type = reg_val & 0x1F; - if (!phy_freq_type) { - printf("Poll for freq_chg_req on SIM register and change to F0 frequency.\n"); - set_ddr_clk(fsp_table[phy_freq_type] >> 1); - - /* Write 1'b1 at LPDDR_CTRL2 bit phy_freq_cfg_ack */ - reg_val = readl(AVD_SIM_LPDDR_CTRL2); - writel(reg_val | (0x1 << 6), AVD_SIM_LPDDR_CTRL2); - } else if (phy_freq_type == 0x01) { - printf("Poll for freq_chg_req on SIM register and change to F1 frequency.\n"); - set_ddr_clk(fsp_table[phy_freq_type] >> 1); - - /* Write 1'b1 at LPDDR_CTRL2 bit phy_freq_cfg_ack */ - reg_val = readl(AVD_SIM_LPDDR_CTRL2); - writel(reg_val | (0x1 << 6), AVD_SIM_LPDDR_CTRL2); - if (freq_chg_pt == 1) - freq_chg_cnt--; - } else if (phy_freq_type == 0x02) { - printf("Poll for freq_chg_req on SIM register and change to F2 frequency.\n"); - set_ddr_clk(fsp_table[phy_freq_type] >> 1); - - /* Write 1'b1 at LPDDR_CTRL2 bit phy_freq_cfg_ack */ - reg_val = readl(AVD_SIM_LPDDR_CTRL2); - writel(reg_val | (0x1 << 6), AVD_SIM_LPDDR_CTRL2); - if (freq_chg_pt == 2) - freq_chg_cnt--; - } - reg_val = readl(AVD_SIM_LPDDR_CTRL2); - } - } while (1); - - /* Check PLL lock status */ - lock_0 = readl(DENALI_PHY_1564) & 0xffff; - lock_1 = (readl(DENALI_PHY_1564) >> 16) & 0xffff; - lock_2 = readl(DENALI_PHY_1565) & 0xffff; - - if ((lock_0 & 0x3) != 0x3 || (lock_1 & 0x3) != 0x3 || (lock_2 & 0x3) != 0x3) { - printf("De-Skew PLL failed to lock\n"); - printf("lock_0=0x%x, lock_1=0x%x, lock_2=0x%x\n", lock_0, lock_1, lock_2); - return -1; - } - - printf("De-Skew PLL is locked and ready\n"); - return 0; -} - -int ddr_init(struct dram_timing_info2 *dram_timing) -{ - int i; - - debug("%s\n", __func__); - - set_ddr_clk(dram_timing->fsp_table[0] >> 1); /* Set to boot freq */ - - /* Initialize CTL registers */ - for (i = 0; i < dram_timing->ctl_cfg_num; i++) - writel(dram_timing->ctl_cfg[i].val, (ulong)dram_timing->ctl_cfg[i].reg); - - /* Initialize PI registers */ - for (i = 0; i < dram_timing->pi_cfg_num; i++) - writel(dram_timing->pi_cfg[i].val, (ulong)dram_timing->pi_cfg[i].reg); - - /* Write PHY regiters for all 3 frequency points (48Mhz/384Mhz/528Mhz): f1_index=0 */ - writel(PHY_FREQ_SEL_MULTICAST_EN(1) | PHY_FREQ_SEL_INDEX(0), DENALI_PHY_1537); - for (i = 0; i < dram_timing->phy_f1_cfg_num; i++) - writel(dram_timing->phy_f1_cfg[i].val, (ulong)dram_timing->phy_f1_cfg[i].reg); - - /* Write PHY regiters for freqency point 2 (528Mhz): f2_index=1 */ - writel(PHY_FREQ_SEL_MULTICAST_EN(0) | PHY_FREQ_SEL_INDEX(1), DENALI_PHY_1537); - for (i = 0; i < dram_timing->phy_f2_cfg_num; i++) - writel(dram_timing->phy_f2_cfg[i].val, (ulong)dram_timing->phy_f2_cfg[i].reg); - - /* Re-enable MULTICAST mode */ - writel(PHY_FREQ_SEL_MULTICAST_EN(1) | PHY_FREQ_SEL_INDEX(0), DENALI_PHY_1537); - - return ddr_calibration(dram_timing->fsp_table); -} - -void enable_bypass_mode(void) -{ - u32 reg_val; - - /* PI_INIT_LVL_EN=0x0 (DENALI_PI_04) */ - reg_val = readl(DENALI_PI_04) & ~0x1; - writel(reg_val, DENALI_PI_04); - - /* PI_FREQ_MAP=0x1 (DENALI_PI_12) */ - writel(0x1, DENALI_PI_12); - - /* PI_INIT_WORK_FREQ=0x0 (DENALI_PI_11) */ - reg_val = readl(DENALI_PI_11) & ~(0x1f << 8); - writel(reg_val, DENALI_PI_11); - - /* DFIBUS_FREQ_INIT=0x0 (DENALI_CTL_23) */ - reg_val = readl(DENALI_CTL_23) & ~(0x3 << 24); - writel(reg_val, DENALI_CTL_23); - - /* PHY_LP4_BOOT_DISABLE=0x0 (DENALI_PHY_1547) */ - reg_val = readl(DENALI_PHY_1547) & ~(0x1 << 8); - writel(reg_val, DENALI_PHY_1547); - - /* PHY_PLL_BYPASS=0x1 (DENALI_PHY_1624) */ - reg_val = readl(DENALI_PHY_1624) | 0x1; - writel(reg_val, DENALI_PHY_1624); - - /* PHY_LP4_BOOT_PLL_BYPASS to 0x1 (DENALI_PHY_1555) */ - reg_val = readl(DENALI_PHY_1555) | 0x1; - writel(reg_val, DENALI_PHY_1555); - - /* FREQ_CHANGE_TYPE_F0 = 0x0/FREQ_CHANGE_TYPE_F1 = 0x1/FREQ_CHANGE_TYPE_F2 = 0x2 */ - reg_val = 0x020100; - writel(reg_val, DENALI_CTL_25); -}