usb: musb-new: sunxi: Allocate struct phy in private

Allocate struct phy in private structure instead of allocating
locally and assign it to a pointer. This eventually fix miss
alignment phy which is used in another functions.

Tested-by: Chen-Yu Tsai <wens@csie.org> # A33-OlinuXino
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>

diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c
index b846afb094d1e330ad6a0f8563313842785982ee..aa2880eeb922e297959a545660a4347d40e032d8 100644 (file)
--- a/drivers/usb/musb-new/sunxi.c
+++ b/drivers/usb/musb-new/sunxi.c
@@ -87,7 +87,7 @@ struct sunxi_glue {
        struct sunxi_ccm_reg *ccm;
        struct sunxi_musb_config *cfg;
        struct device dev;
-       struct phy *phy;
+       struct phy phy;
 };
 #define to_sunxi_glue(d)       container_of(d, struct sunxi_glue, dev)
 
@@ -235,19 +235,19 @@ static int sunxi_musb_enable(struct musb *musb)
        musb_writeb(musb->mregs, USBC_REG_o_VEND0, 0);
 
        if (is_host_enabled(musb)) {
-               ret = sun4i_usb_phy_vbus_detect(glue->phy);
+               ret = sun4i_usb_phy_vbus_detect(&glue->phy);
                if (ret == 1) {
                        printf("A charger is plugged into the OTG: ");
                        return -ENODEV;
                }
 
-               ret = sun4i_usb_phy_id_detect(glue->phy);
+               ret = sun4i_usb_phy_id_detect(&glue->phy);
                if (ret == 1) {
                        printf("No host cable detected: ");
                        return -ENODEV;
                }
 
-               ret = generic_phy_power_on(glue->phy);
+               ret = generic_phy_power_on(&glue->phy);
                if (ret) {
                        pr_err("failed to power on USB PHY\n");
                        return ret;
@@ -271,7 +271,7 @@ static void sunxi_musb_disable(struct musb *musb)
                return;
 
        if (is_host_enabled(musb)) {
-               ret = generic_phy_power_off(glue->phy);
+               ret = generic_phy_power_off(&glue->phy);
                if (ret) {
                        pr_err("failed to power off USB PHY\n");
                        return;
@@ -291,7 +291,7 @@ static int sunxi_musb_init(struct musb *musb)
 
        pr_debug("%s():\n", __func__);
 
-       ret = generic_phy_init(glue->phy);
+       ret = generic_phy_init(&glue->phy);
        if (ret) {
                pr_err("failed to init USB PHY\n");
                return ret;
@@ -330,14 +330,14 @@ static void sunxi_musb_pre_root_reset_end(struct musb *musb)
 {
        struct sunxi_glue *glue = to_sunxi_glue(musb->controller);
 
-       sun4i_usb_phy_set_squelch_detect(glue->phy, false);
+       sun4i_usb_phy_set_squelch_detect(&glue->phy, false);
 }
 
 static void sunxi_musb_post_root_reset_end(struct musb *musb)
 {
        struct sunxi_glue *glue = to_sunxi_glue(musb->controller);
 
-       sun4i_usb_phy_set_squelch_detect(glue->phy, true);
+       sun4i_usb_phy_set_squelch_detect(&glue->phy, true);
 }
 
 static const struct musb_platform_ops sunxi_musb_ops = {
@@ -405,7 +405,6 @@ static int musb_usb_probe(struct udevice *dev)
        struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
        struct musb_hdrc_platform_data pdata;
        void *base = dev_read_addr_ptr(dev);
-       struct phy phy;
        int ret;
 
        if (!base)
@@ -419,13 +418,12 @@ static int musb_usb_probe(struct udevice *dev)
        if (IS_ERR(glue->ccm))
                return PTR_ERR(glue->ccm);
 
-       ret = generic_phy_get_by_name(dev, "usb", &phy);
+       ret = generic_phy_get_by_name(dev, "usb", &glue->phy);
        if (ret) {
                pr_err("failed to get usb PHY\n");
                return ret;
        }
 
-       glue->phy = &phy;
        priv->desc_before_addr = true;
 
        memset(&pdata, 0, sizeof(pdata));
@@ -460,8 +458,8 @@ static int musb_usb_remove(struct udevice *dev)
        struct musb_host_data *host = &glue->mdata;
        int ret;
 
-       if (generic_phy_valid(glue->phy)) {
-               ret = generic_phy_exit(glue->phy);
+       if (generic_phy_valid(&glue->phy)) {
+               ret = generic_phy_exit(&glue->phy);
                if (ret) {
                        pr_err("failed to exit %s USB PHY\n", dev->name);
                        return ret;