dt: bcm63158: watchdog should use a 50Mhz clock

The watchdog should use a clock at 50 Mhz, so
instead of using the clock osc (200 Mhz), we
define a reference clock at 50Mhz and use it
for both watchdog.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Stefan Roese <sr@denx.de>

diff --git a/arch/arm/dts/bcm63158.dtsi b/arch/arm/dts/bcm63158.dtsi
index 4b2eaeea2eb282de181ede2961545dd1276724c0..175af380182b19a901ad05ece4b2a9a98d9859f9 100644 (file)
--- a/arch/arm/dts/bcm63158.dtsi
+++ b/arch/arm/dts/bcm63158.dtsi
@@ -66,6 +66,12 @@
                        clock-frequency = <0xbebc200>;
                        u-boot,dm-pre-reloc;
                };
+
+               refclk50mhz: refclk50mhz {
+                       compatible = "fixed-clock";
+                       #clock-cells = <0>;
+                       clock-frequency = <50000000>;
+               };
        };
 
        ubus {
@@ -92,13 +98,13 @@
                wdt1: watchdog@ff800480 {
                        compatible = "brcm,bcm6345-wdt";
                        reg = <0x0 0xff800480 0x0 0x14>;
-                       clocks = <&periph_osc>;
+                       clocks = <&refclk50mhz>;
                };
 
                wdt2: watchdog@ff8004c0 {
                        compatible = "brcm,bcm6345-wdt";
                        reg = <0x0 0xff8004c0 0x0 0x14>;
-                       clocks = <&periph_osc>;
+                       clocks = <&refclk50mhz>;
                };
 
                wdt-reboot {