Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"

This reverts commit d345ba61d4f2c7b2db4520d8142e4a2c1df3d7d7, it caused
a build regression:

arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:109.4-14: Warning (reg_format): /switch/ports:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #address-cells value
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #size-cells value

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
index df8199fd4eb461c47ea835f6d2f92c7c8694412c..249476fdad7a6294298b9f65559029a7b1ed690e 100644 (file)
--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -93,83 +93,6 @@
                        gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
                };
        };
-
-       switch {
-               compatible = "realtek,rtl8365mb";
-               /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
-               mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-               mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-               reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-               realtek,disable-leds;
-               dsa,member = <1 0>;
-
-               ports {
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       reg = <0>;
-
-                       port@0 {
-                               reg = <0>;
-                               label = "lan5";
-                               phy-handle = <&ethphy0>;
-                       };
-
-                       port@1 {
-                               reg = <1>;
-                               label = "lan6";
-                               phy-handle = <&ethphy1>;
-                       };
-
-                       port@2 {
-                               reg = <2>;
-                               label = "lan7";
-                               phy-handle = <&ethphy2>;
-                       };
-
-                       port@3 {
-                               reg = <3>;
-                               label = "lan8";
-                               phy-handle = <&ethphy3>;
-                       };
-
-                       port@6 {
-                               reg = <6>;
-                               label = "cpu";
-                               ethernet = <&sw0_p5>;
-                               phy-mode = "rgmii";
-                               tx-internal-delay-ps = <2000>;
-                               rx-internal-delay-ps = <2100>;
-
-                               fixed-link {
-                                       speed = <1000>;
-                                       full-duplex;
-                                       pause;
-                               };
-                       };
-               };
-
-               mdio {
-                       compatible = "realtek,smi-mdio";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-
-                       ethphy0: ethernet-phy@0 {
-                               reg = <0>;
-                       };
-
-                       ethphy1: ethernet-phy@1 {
-                               reg = <1>;
-                       };
-
-                       ethphy2: ethernet-phy@2 {
-                               reg = <2>;
-                       };
-
-                       ethphy3: ethernet-phy@3 {
-                               reg = <3>;
-                       };
-               };
-       };
 };
 
 &srab {