bnx2x: remove {TPA,GRO}_ENABLE_FLAG

These flags are redundant with dev->features. Remove them.
Just make sure to set dev->features ourselves in bnx2x_set_features()
before performing the reload of the card.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index 2a41604cdd0eb4119d5ace86fa328e343edcac85..a3b0f7a0c61e0d6ffeefcd88ae81ab751554e085 100644 (file)
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1545,9 +1545,7 @@ struct bnx2x {
 #define USING_MSIX_FLAG                        (1 << 5)
 #define USING_MSI_FLAG                 (1 << 6)
 #define DISABLE_MSI_FLAG               (1 << 7)
-#define TPA_ENABLE_FLAG                        (1 << 8)
 #define NO_MCP_FLAG                    (1 << 9)
-#define GRO_ENABLE_FLAG                        (1 << 10)
 #define MF_FUNC_DIS                    (1 << 11)
 #define OWN_CNIC_IRQ                   (1 << 12)
 #define NO_ISCSI_OOO_FLAG              (1 << 13)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 84612b082b86260317e85adf36c46c84e0cd981e..a8bb8f664d3d7f9a031158d5cac82820fbed7d6d 100644 (file)
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -2477,9 +2477,9 @@ static void bnx2x_bz_fp(struct bnx2x *bp, int index)
        /* set the tpa flag for each queue. The tpa flag determines the queue
         * minimal size so it must be set prior to queue memory allocation
         */
-       if (bp->flags & TPA_ENABLE_FLAG)
+       if (bp->dev->features & NETIF_F_LRO)
                fp->mode = TPA_MODE_LRO;
-       else if (bp->flags & GRO_ENABLE_FLAG &&
+       else if (bp->dev->features & NETIF_F_GRO &&
                 bnx2x_mtu_allows_gro(bp->dev->mtu))
                fp->mode = TPA_MODE_GRO;
        else
@@ -3249,7 +3249,7 @@ int bnx2x_low_latency_recv(struct napi_struct *napi)
 
        if ((bp->state == BNX2X_STATE_CLOSED) ||
            (bp->state == BNX2X_STATE_ERROR) ||
-           (bp->flags & (TPA_ENABLE_FLAG | GRO_ENABLE_FLAG)))
+           (bp->dev->features & (NETIF_F_LRO | NETIF_F_GRO)))
                return LL_FLUSH_FAILED;
 
        if (!bnx2x_fp_lock_poll(fp))
@@ -4840,19 +4840,9 @@ netdev_features_t bnx2x_fix_features(struct net_device *dev,
 int bnx2x_set_features(struct net_device *dev, netdev_features_t features)
 {
        struct bnx2x *bp = netdev_priv(dev);
-       u32 flags = bp->flags;
-       u32 changes;
+       netdev_features_t changes = features ^ dev->features;
        bool bnx2x_reload = false;
-
-       if (features & NETIF_F_LRO)
-               flags |= TPA_ENABLE_FLAG;
-       else
-               flags &= ~TPA_ENABLE_FLAG;
-
-       if (features & NETIF_F_GRO)
-               flags |= GRO_ENABLE_FLAG;
-       else
-               flags &= ~GRO_ENABLE_FLAG;
+       int rc;
 
        /* VFs or non SRIOV PFs should be able to change loopback feature */
        if (!pci_num_vf(bp->pdev)) {
@@ -4869,24 +4859,23 @@ int bnx2x_set_features(struct net_device *dev, netdev_features_t features)
                }
        }
 
-       changes = flags ^ bp->flags;
-
        /* if GRO is changed while LRO is enabled, don't force a reload */
-       if ((changes & GRO_ENABLE_FLAG) && (flags & TPA_ENABLE_FLAG))
-               changes &= ~GRO_ENABLE_FLAG;
+       if ((changes & NETIF_F_GRO) && (features & NETIF_F_LRO))
+               changes &= ~NETIF_F_GRO;
 
        /* if GRO is changed while HW TPA is off, don't force a reload */
-       if ((changes & GRO_ENABLE_FLAG) && bp->disable_tpa)
-               changes &= ~GRO_ENABLE_FLAG;
+       if ((changes & NETIF_F_GRO) && bp->disable_tpa)
+               changes &= ~NETIF_F_GRO;
 
        if (changes)
                bnx2x_reload = true;
 
-       bp->flags = flags;
-
        if (bnx2x_reload) {
-               if (bp->recovery_state == BNX2X_RECOVERY_DONE)
-                       return bnx2x_reload_if_running(dev);
+               if (bp->recovery_state == BNX2X_RECOVERY_DONE) {
+                       dev->features = features;
+                       rc = bnx2x_reload_if_running(dev);
+                       return rc ? rc : 1;
+               }
                /* else: bnx2x_nic_load() will be called at end of recovery */
        }
 

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 64ea5adf72eb30eec7a1cbd4e6408932b1930352..60d2b8ebba163535f30838b615be8874863a3f57 100644 (file)
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -3304,7 +3304,7 @@ static void bnx2x_pf_init(struct bnx2x *bp)
        /* This flag is relevant for E1x only.
         * E2 doesn't have a TPA configuration in a function level.
         */
-       flags |= (bp->flags & TPA_ENABLE_FLAG) ? FUNC_FLG_TPA : 0;
+       flags |= (bp->dev->features & NETIF_F_LRO) ? FUNC_FLG_TPA : 0;
 
        func_init.func_flgs = flags;
        func_init.pf_id = BP_FUNC(bp);
@@ -12107,11 +12107,8 @@ static int bnx2x_init_bp(struct bnx2x *bp)
 
        /* Set TPA flags */
        if (bp->disable_tpa) {
-               bp->flags &= ~(TPA_ENABLE_FLAG | GRO_ENABLE_FLAG);
                bp->dev->hw_features &= ~NETIF_F_LRO;
                bp->dev->features &= ~NETIF_F_LRO;
-       } else {
-               bp->flags |= (TPA_ENABLE_FLAG | GRO_ENABLE_FLAG);
        }
 
        if (CHIP_IS_E1(bp))