To compile this driver as a module, choose M here. The module
will be called igb.
+config IGB_HWMON
+ bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
+ default y
+ depends on IGB && HWMON && !(IGB=y && HWMON=m)
+ ---help---
+ Say Y if you want to expose thermal sensor data on Intel devices.
+
+ Some of our devices contain thermal sensors, both external and internal.
+ This data is available via the hwmon sysfs interface and exposes
+ the onboard sensors.
+
config IGB_DCA
bool "Direct Cache Access (DCA) Support"
default y
igb-objs := igb_main.o igb_ethtool.o e1000_82575.o \
e1000_mac.o e1000_nvm.o e1000_phy.o e1000_mbx.o \
- e1000_i210.o igb_ptp.o
+ e1000_i210.o igb_ptp.o igb_hwmon.o
return ret_val;
}
+static const u8 e1000_emc_temp_data[4] = {
+ E1000_EMC_INTERNAL_DATA,
+ E1000_EMC_DIODE1_DATA,
+ E1000_EMC_DIODE2_DATA,
+ E1000_EMC_DIODE3_DATA
+};
+static const u8 e1000_emc_therm_limit[4] = {
+ E1000_EMC_INTERNAL_THERM_LIMIT,
+ E1000_EMC_DIODE1_THERM_LIMIT,
+ E1000_EMC_DIODE2_THERM_LIMIT,
+ E1000_EMC_DIODE3_THERM_LIMIT
+};
+
+/* igb_get_thermal_sensor_data_generic - Gathers thermal sensor data
+ * @hw: pointer to hardware structure
+ *
+ * Updates the temperatures in mac.thermal_sensor_data
+ */
+s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw)
+{
+ s32 status = E1000_SUCCESS;
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 i;
+ struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
+ return E1000_NOT_IMPLEMENTED;
+
+ data->sensor[0].temp = (rd32(E1000_THMJT) & 0xFF);
+
+ /* Return the internal sensor only if ETS is unsupported */
+ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset);
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+ return status;
+
+ hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg);
+ if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
+ != NVM_ETS_TYPE_EMC)
+ return E1000_NOT_IMPLEMENTED;
+
+ num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
+ if (num_sensors > E1000_MAX_SENSORS)
+ num_sensors = E1000_MAX_SENSORS;
+
+ for (i = 1; i < num_sensors; i++) {
+ hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor);
+ sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
+ NVM_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
+ NVM_ETS_DATA_LOC_SHIFT);
+
+ if (sensor_location != 0)
+ hw->phy.ops.read_i2c_byte(hw,
+ e1000_emc_temp_data[sensor_index],
+ E1000_I2C_THERMAL_SENSOR_ADDR,
+ &data->sensor[i].temp);
+ }
+ return status;
+}
+
+/* igb_init_thermal_sensor_thresh_generic - Sets thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Sets the thermal sensor thresholds according to the NVM map
+ * and save off the threshold and location values into mac.thermal_sensor_data
+ */
+s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *hw)
+{
+ s32 status = E1000_SUCCESS;
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 low_thresh_delta;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 therm_limit;
+ u8 i;
+ struct e1000_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ if ((hw->mac.type != e1000_i350) || (hw->bus.func != 0))
+ return E1000_NOT_IMPLEMENTED;
+
+ memset(data, 0, sizeof(struct e1000_thermal_sensor_data));
+
+ data->sensor[0].location = 0x1;
+ data->sensor[0].caution_thresh =
+ (rd32(E1000_THHIGHTC) & 0xFF);
+ data->sensor[0].max_op_thresh =
+ (rd32(E1000_THLOWTC) & 0xFF);
+
+ /* Return the internal sensor only if ETS is unsupported */
+ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_offset);
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+ return status;
+
+ hw->nvm.ops.read(hw, ets_offset, 1, &ets_cfg);
+ if (((ets_cfg & NVM_ETS_TYPE_MASK) >> NVM_ETS_TYPE_SHIFT)
+ != NVM_ETS_TYPE_EMC)
+ return E1000_NOT_IMPLEMENTED;
+
+ low_thresh_delta = ((ets_cfg & NVM_ETS_LTHRES_DELTA_MASK) >>
+ NVM_ETS_LTHRES_DELTA_SHIFT);
+ num_sensors = (ets_cfg & NVM_ETS_NUM_SENSORS_MASK);
+
+ for (i = 1; i <= num_sensors; i++) {
+ hw->nvm.ops.read(hw, (ets_offset + i), 1, &ets_sensor);
+ sensor_index = ((ets_sensor & NVM_ETS_DATA_INDEX_MASK) >>
+ NVM_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & NVM_ETS_DATA_LOC_MASK) >>
+ NVM_ETS_DATA_LOC_SHIFT);
+ therm_limit = ets_sensor & NVM_ETS_DATA_HTHRESH_MASK;
+
+ hw->phy.ops.write_i2c_byte(hw,
+ e1000_emc_therm_limit[sensor_index],
+ E1000_I2C_THERMAL_SENSOR_ADDR,
+ therm_limit);
+
+ if ((i < E1000_MAX_SENSORS) && (sensor_location != 0)) {
+ data->sensor[i].location = sensor_location;
+ data->sensor[i].caution_thresh = therm_limit;
+ data->sensor[i].max_op_thresh = therm_limit -
+ low_thresh_delta;
+ }
+ }
+ return status;
+}
+
static struct e1000_mac_operations e1000_mac_ops_82575 = {
.init_hw = igb_init_hw_82575,
.check_for_link = igb_check_for_link_82575,
.rar_set = igb_rar_set,
.read_mac_addr = igb_read_mac_addr_82575,
.get_speed_and_duplex = igb_get_speed_and_duplex_copper,
+#ifdef CONFIG_IGB_HWMON
+ .get_thermal_sensor_data = igb_get_thermal_sensor_data_generic,
+ .init_thermal_sensor_thresh = igb_init_thermal_sensor_thresh_generic,
+#endif
};
static struct e1000_phy_operations e1000_phy_ops_82575 = {
void igb_vmdq_set_replication_pf(struct e1000_hw *, bool);
u16 igb_rxpbs_adjust_82580(u32 data);
s32 igb_set_eee_i350(struct e1000_hw *);
+s32 igb_init_thermal_sensor_thresh_generic(struct e1000_hw *);
+s32 igb_get_thermal_sensor_data_generic(struct e1000_hw *hw);
#define E1000_I2C_THERMAL_SENSOR_ADDR 0xF8
#define E1000_EMC_INTERNAL_DATA 0x00
s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *);
s32 (*acquire_swfw_sync)(struct e1000_hw *, u16);
void (*release_swfw_sync)(struct e1000_hw *, u16);
+#ifdef CONFIG_IGB_HWMON
+ s32 (*get_thermal_sensor_data)(struct e1000_hw *);
+ s32 (*init_thermal_sensor_thresh)(struct e1000_hw *);
+#endif
};
struct igb_i2c_client_list *next;
};
+#ifdef CONFIG_IGB_HWMON
+
+#define IGB_HWMON_TYPE_LOC 0
+#define IGB_HWMON_TYPE_TEMP 1
+#define IGB_HWMON_TYPE_CAUTION 2
+#define IGB_HWMON_TYPE_MAX 3
+
+struct hwmon_attr {
+ struct device_attribute dev_attr;
+ struct e1000_hw *hw;
+ struct e1000_thermal_diode_data *sensor;
+ char name[12];
+ };
+
+struct hwmon_buff {
+ struct device *device;
+ struct hwmon_attr *hwmon_list;
+ unsigned int n_hwmon;
+ };
+#endif
+
/* board specific private data structure */
struct igb_adapter {
unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
struct timecounter tc;
char fw_version[32];
+#ifdef CONFIG_IGB_HWMON
+ struct hwmon_buff igb_hwmon_buff;
+ bool ets;
+#endif
struct i2c_algo_bit_data i2c_algo;
struct i2c_adapter i2c_adap;
struct igb_i2c_client_list *i2c_clients;
extern int igb_ptp_hwtstamp_ioctl(struct net_device *netdev,
struct ifreq *ifr, int cmd);
+#ifdef CONFIG_IGB_HWMON
+extern void igb_sysfs_exit(struct igb_adapter *adapter);
+extern int igb_sysfs_init(struct igb_adapter *adapter);
+#endif
static inline s32 igb_reset_phy(struct e1000_hw *hw)
{
if (hw->phy.ops.reset)
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2012 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "igb.h"
+#include "e1000_82575.h"
+#include "e1000_hw.h"
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sysfs.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/hwmon.h>
+#include <linux/pci.h>
+
+#ifdef CONFIG_IGB_HWMON
+/* hwmon callback functions */
+static ssize_t igb_hwmon_show_location(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ return sprintf(buf, "loc%u\n",
+ igb_attr->sensor->location);
+}
+
+static ssize_t igb_hwmon_show_temp(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ unsigned int value;
+
+ /* reset the temp field */
+ igb_attr->hw->mac.ops.get_thermal_sensor_data(igb_attr->hw);
+
+ value = igb_attr->sensor->temp;
+
+ /* display millidegree */
+ value *= 1000;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t igb_hwmon_show_cautionthresh(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ unsigned int value = igb_attr->sensor->caution_thresh;
+
+ /* display millidegree */
+ value *= 1000;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+static ssize_t igb_hwmon_show_maxopthresh(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct hwmon_attr *igb_attr = container_of(attr, struct hwmon_attr,
+ dev_attr);
+ unsigned int value = igb_attr->sensor->max_op_thresh;
+
+ /* display millidegree */
+ value *= 1000;
+
+ return sprintf(buf, "%u\n", value);
+}
+
+/* igb_add_hwmon_attr - Create hwmon attr table for a hwmon sysfs file.
+ * @ adapter: pointer to the adapter structure
+ * @ offset: offset in the eeprom sensor data table
+ * @ type: type of sensor data to display
+ *
+ * For each file we want in hwmon's sysfs interface we need a device_attribute
+ * This is included in our hwmon_attr struct that contains the references to
+ * the data structures we need to get the data to display.
+ */
+static int igb_add_hwmon_attr(struct igb_adapter *adapter,
+ unsigned int offset, int type) {
+ int rc;
+ unsigned int n_attr;
+ struct hwmon_attr *igb_attr;
+
+ n_attr = adapter->igb_hwmon_buff.n_hwmon;
+ igb_attr = &adapter->igb_hwmon_buff.hwmon_list[n_attr];
+
+ switch (type) {
+ case IGB_HWMON_TYPE_LOC:
+ igb_attr->dev_attr.show = igb_hwmon_show_location;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_label", offset);
+ break;
+ case IGB_HWMON_TYPE_TEMP:
+ igb_attr->dev_attr.show = igb_hwmon_show_temp;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_input", offset);
+ break;
+ case IGB_HWMON_TYPE_CAUTION:
+ igb_attr->dev_attr.show = igb_hwmon_show_cautionthresh;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_max", offset);
+ break;
+ case IGB_HWMON_TYPE_MAX:
+ igb_attr->dev_attr.show = igb_hwmon_show_maxopthresh;
+ snprintf(igb_attr->name, sizeof(igb_attr->name),
+ "temp%u_crit", offset);
+ break;
+ default:
+ rc = -EPERM;
+ return rc;
+ }
+
+ /* These always the same regardless of type */
+ igb_attr->sensor =
+ &adapter->hw.mac.thermal_sensor_data.sensor[offset];
+ igb_attr->hw = &adapter->hw;
+ igb_attr->dev_attr.store = NULL;
+ igb_attr->dev_attr.attr.mode = S_IRUGO;
+ igb_attr->dev_attr.attr.name = igb_attr->name;
+ sysfs_attr_init(&igb_attr->dev_attr.attr);
+ rc = device_create_file(&adapter->pdev->dev,
+ &igb_attr->dev_attr);
+ if (rc == 0)
+ ++adapter->igb_hwmon_buff.n_hwmon;
+
+ return rc;
+}
+
+static void igb_sysfs_del_adapter(struct igb_adapter *adapter)
+{
+ int i;
+
+ if (adapter == NULL)
+ return;
+
+ for (i = 0; i < adapter->igb_hwmon_buff.n_hwmon; i++) {
+ device_remove_file(&adapter->pdev->dev,
+ &adapter->igb_hwmon_buff.hwmon_list[i].dev_attr);
+ }
+
+ kfree(adapter->igb_hwmon_buff.hwmon_list);
+
+ if (adapter->igb_hwmon_buff.device)
+ hwmon_device_unregister(adapter->igb_hwmon_buff.device);
+}
+
+/* called from igb_main.c */
+void igb_sysfs_exit(struct igb_adapter *adapter)
+{
+ igb_sysfs_del_adapter(adapter);
+}
+
+/* called from igb_main.c */
+int igb_sysfs_init(struct igb_adapter *adapter)
+{
+ struct hwmon_buff *igb_hwmon = &adapter->igb_hwmon_buff;
+ unsigned int i;
+ int n_attrs;
+ int rc = 0;
+
+ /* If this method isn't defined we don't support thermals */
+ if (adapter->hw.mac.ops.init_thermal_sensor_thresh == NULL)
+ goto exit;
+
+ /* Don't create thermal hwmon interface if no sensors present */
+ rc = (adapter->hw.mac.ops.init_thermal_sensor_thresh(&adapter->hw));
+ if (rc)
+ goto exit;
+
+ /* Allocation space for max attributes
+ * max num sensors * values (loc, temp, max, caution)
+ */
+ n_attrs = E1000_MAX_SENSORS * 4;
+ igb_hwmon->hwmon_list = kcalloc(n_attrs, sizeof(struct hwmon_attr),
+ GFP_KERNEL);
+ if (!igb_hwmon->hwmon_list) {
+ rc = -ENOMEM;
+ goto err;
+ }
+
+ igb_hwmon->device = hwmon_device_register(&adapter->pdev->dev);
+ if (IS_ERR(igb_hwmon->device)) {
+ rc = PTR_ERR(igb_hwmon->device);
+ goto err;
+ }
+
+ for (i = 0; i < E1000_MAX_SENSORS; i++) {
+
+ /* Only create hwmon sysfs entries for sensors that have
+ * meaningful data.
+ */
+ if (adapter->hw.mac.thermal_sensor_data.sensor[i].location == 0)
+ continue;
+
+ /* Bail if any hwmon attr struct fails to initialize */
+ rc = igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_CAUTION);
+ rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_LOC);
+ rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_TEMP);
+ rc |= igb_add_hwmon_attr(adapter, i, IGB_HWMON_TYPE_MAX);
+ if (rc)
+ goto err;
+ }
+
+ goto exit;
+
+err:
+ igb_sysfs_del_adapter(adapter);
+exit:
+ return rc;
+}
+#endif
igb_force_mac_fc(hw);
igb_init_dmac(adapter, pba);
+#ifdef CONFIG_IGB_HWMON
+ /* Re-initialize the thermal sensor on i350 devices. */
+ if (!test_bit(__IGB_DOWN, &adapter->state)) {
+ if (mac->type == e1000_i350 && hw->bus.func == 0) {
+ /* If present, re-initialize the external thermal sensor
+ * interface.
+ */
+ if (adapter->ets)
+ mac->ops.init_thermal_sensor_thresh(hw);
+ }
+ }
+#endif
if (!netif_running(adapter->netdev))
igb_power_down_link(adapter);
}
#endif
+#ifdef CONFIG_IGB_HWMON
+ /* Initialize the thermal sensor on i350 devices. */
+ if (hw->mac.type == e1000_i350 && hw->bus.func == 0) {
+ u16 ets_word;
+ /*
+ * Read the NVM to determine if this i350 device supports an
+ * external thermal sensor.
+ */
+ hw->nvm.ops.read(hw, NVM_ETS_CFG, 1, &ets_word);
+ if (ets_word != 0x0000 && ets_word != 0xFFFF)
+ adapter->ets = true;
+ else
+ adapter->ets = false;
+ if (igb_sysfs_init(adapter))
+ dev_err(&pdev->dev,
+ "failed to allocate sysfs resources\n");
+ } else {
+ adapter->ets = false;
+ }
+#endif
/* do hw tstamp init after resetting */
igb_ptp_init(adapter);
struct e1000_hw *hw = &adapter->hw;
pm_runtime_get_noresume(&pdev->dev);
+#ifdef CONFIG_IGB_HWMON
+ igb_sysfs_exit(adapter);
+#endif
igb_remove_i2c(adapter);
-
igb_ptp_stop(adapter);
-
/*
* The watchdog timer may be rescheduled, so explicitly
* disable watchdog from being rescheduled.
}
}
- /* no client_list found, create a new one */
+ /* no client_list found, create a new one as long as
+ * irqs are not disabled
+ */
+ if (unlikely(irqs_disabled()))
+ goto exit;
+
client_list = kzalloc(sizeof(*client_list), GFP_KERNEL);
if (client_list == NULL)
goto exit;
client_info.platform_data = adapter;
client_list->client = i2c_new_device(&adapter->i2c_adap, &client_info);
if (client_list->client == NULL) {
- dev_info(&adapter->pdev->dev, "Failed to create new i2c device..\n");
+ dev_info(&adapter->pdev->dev,
+ "Failed to create new i2c device..\n");
goto err_no_client;
}
client_list->next = adapter->i2c_clients;
adapter->i2c_clients = client_list;
- spin_unlock_irqrestore(&i2c_clients_lock, flags);
-
client = client_list->client;
goto exit;
projects / kernel.git / commitdiff