error = goodix_irq_direction_output(ts, 0);
if (error)
- return error;
+ goto error;
msleep(50); /* T5: 50ms */
error = goodix_irq_direction_input(ts);
if (error)
- return error;
+ goto error;
return 0;
+
+error:
+ dev_err(&ts->client->dev, "Controller irq sync failed.\n");
+ return error;
}
/**
- * goodix_reset - Reset device during power on
+ * goodix_reset_no_int_sync - Reset device, leaving interrupt line in output mode
*
* @ts: goodix_ts_data pointer
*/
-static int goodix_reset(struct goodix_ts_data *ts)
+int goodix_reset_no_int_sync(struct goodix_ts_data *ts)
{
int error;
/* begin select I2C slave addr */
error = gpiod_direction_output(ts->gpiod_rst, 0);
if (error)
- return error;
+ goto error;
msleep(20); /* T2: > 10ms */
/* HIGH: 0x28/0x29, LOW: 0xBA/0xBB */
error = goodix_irq_direction_output(ts, ts->client->addr == 0x14);
if (error)
- return error;
+ goto error;
usleep_range(100, 2000); /* T3: > 100us */
error = gpiod_direction_output(ts->gpiod_rst, 1);
if (error)
- return error;
+ goto error;
usleep_range(6000, 10000); /* T4: > 5ms */
/* end select I2C slave addr */
error = gpiod_direction_input(ts->gpiod_rst);
if (error)
- return error;
+ goto error;
- error = goodix_int_sync(ts);
+ return 0;
+
+error:
+ dev_err(&ts->client->dev, "Controller reset failed.\n");
+ return error;
+}
+
+/**
+ * goodix_reset - Reset device during power on
+ *
+ * @ts: goodix_ts_data pointer
+ */
+static int goodix_reset(struct goodix_ts_data *ts)
+{
+ int error;
+
+ error = goodix_reset_no_int_sync(ts);
if (error)
return error;
- return 0;
+ return goodix_int_sync(ts);
}
#ifdef ACPI_GPIO_SUPPORT
if (ts->reset_controller_at_probe) {
/* reset the controller */
error = goodix_reset(ts);
- if (error) {
- dev_err(&client->dev, "Controller reset failed.\n");
+ if (error)
return error;
- }
}
error = goodix_i2c_test(client);
if (error != 0 || config_ver != ts->config[0]) {
error = goodix_reset(ts);
- if (error) {
- dev_err(dev, "Controller reset failed.\n");
+ if (error)
return error;
- }
error = goodix_send_cfg(ts, ts->config, ts->chip->config_len);
if (error)