spi: cadence_qspi: convert to livetree

Convert 'cadence_spi_ofdata_to_platdata' to use dev_read_* functions to
read driver parameters and 'dev_read_first_subnode'/'ofnode_read_*' to
read flash (child node) parameters.

Tested on socfpga_socrates (socfpga gen5).

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>

diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
index 41c87004d8cb8050e4907b11b0c37e9949bafda1..e2e54cd27723c313fb7b8f76f80e9e63e7b6b610 100644 (file)
--- a/drivers/spi/cadence_qspi.c
+++ b/drivers/spi/cadence_qspi.c
@@ -18,8 +18,6 @@
 #define CQSPI_INDIRECT_READ            2
 #define CQSPI_INDIRECT_WRITE           3
 
-DECLARE_GLOBAL_DATA_PTR;
-
 static int cadence_spi_write_speed(struct udevice *bus, uint hz)
 {
        struct cadence_spi_platdata *plat = bus->platdata;
@@ -295,36 +293,37 @@ static int cadence_spi_xfer(struct udevice *dev, unsigned int bitlen,
 static int cadence_spi_ofdata_to_platdata(struct udevice *bus)
 {
        struct cadence_spi_platdata *plat = bus->platdata;
-       const void *blob = gd->fdt_blob;
-       int node = dev_of_offset(bus);
-       int subnode;
+       ofnode subnode;
 
        plat->regbase = (void *)devfdt_get_addr_index(bus, 0);
        plat->ahbbase = (void *)devfdt_get_addr_index(bus, 1);
-       plat->is_decoded_cs = fdtdec_get_bool(blob, node, "cdns,is-decoded-cs");
-       plat->fifo_depth = fdtdec_get_uint(blob, node, "cdns,fifo-depth", 128);
-       plat->fifo_width = fdtdec_get_uint(blob, node, "cdns,fifo-width", 4);
-       plat->trigger_address = fdtdec_get_uint(blob, node,
-                                               "cdns,trigger-address", 0);
+       plat->is_decoded_cs = dev_read_bool(bus, "cdns,is-decoded-cs");
+       plat->fifo_depth = dev_read_u32_default(bus, "cdns,fifo-depth", 128);
+       plat->fifo_width = dev_read_u32_default(bus, "cdns,fifo-width", 4);
+       plat->trigger_address = dev_read_u32_default(bus,
+                                                    "cdns,trigger-address",
+                                                    0);
 
        /* All other paramters are embedded in the child node */
-       subnode = fdt_first_subnode(blob, node);
-       if (subnode < 0) {
+       subnode = dev_read_first_subnode(bus);
+       if (!ofnode_valid(subnode)) {
                printf("Error: subnode with SPI flash config missing!\n");
                return -ENODEV;
        }
 
        /* Use 500 KHz as a suitable default */
-       plat->max_hz = fdtdec_get_uint(blob, subnode, "spi-max-frequency",
-                                      500000);
+       plat->max_hz = ofnode_read_u32_default(subnode, "spi-max-frequency",
+                                              500000);
 
        /* Read other parameters from DT */
-       plat->page_size = fdtdec_get_uint(blob, subnode, "page-size", 256);
-       plat->block_size = fdtdec_get_uint(blob, subnode, "block-size", 16);
-       plat->tshsl_ns = fdtdec_get_uint(blob, subnode, "cdns,tshsl-ns", 200);
-       plat->tsd2d_ns = fdtdec_get_uint(blob, subnode, "cdns,tsd2d-ns", 255);
-       plat->tchsh_ns = fdtdec_get_uint(blob, subnode, "cdns,tchsh-ns", 20);
-       plat->tslch_ns = fdtdec_get_uint(blob, subnode, "cdns,tslch-ns", 20);
+       plat->page_size = ofnode_read_u32_default(subnode, "page-size", 256);
+       plat->block_size = ofnode_read_u32_default(subnode, "block-size", 16);
+       plat->tshsl_ns = ofnode_read_u32_default(subnode, "cdns,tshsl-ns",
+                                                200);
+       plat->tsd2d_ns = ofnode_read_u32_default(subnode, "cdns,tsd2d-ns",
+                                                255);
+       plat->tchsh_ns = ofnode_read_u32_default(subnode, "cdns,tchsh-ns", 20);
+       plat->tslch_ns = ofnode_read_u32_default(subnode, "cdns,tslch-ns", 20);
 
        debug("%s: regbase=%p ahbbase=%p max-frequency=%d page-size=%d\n",
              __func__, plat->regbase, plat->ahbbase, plat->max_hz,