#define MAP_TRIGGERS_TO_BUTTONS (1 << 1)
#define MAP_STICKS_TO_NULL (1 << 2)
#define MAP_SELECT_BUTTON (1 << 3)
+#define MAP_PADDLES (1 << 4)
#define DANCEPAD_MAP_CONFIG (MAP_DPAD_TO_BUTTONS | \
MAP_TRIGGERS_TO_BUTTONS | MAP_STICKS_TO_NULL)
*/
#define XPAD360W_POWEROFF_TIMEOUT 5
+#define PKT_XB 0
+#define PKT_XBE1 1
+#define PKT_XBE2_FW_OLD 2
+#define PKT_XBE2_FW_5_EARLY 3
+#define PKT_XBE2_FW_5_11 4
+
static bool dpad_to_buttons;
module_param(dpad_to_buttons, bool, S_IRUGO);
MODULE_PARM_DESC(dpad_to_buttons, "Map D-PAD to buttons rather than axes for unknown pads");
char *name;
u8 mapping;
u8 xtype;
+ u8 packet_type;
} xpad_device[] = {
{ 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 },
{ 0x03eb, 0xff01, "Wooting One (Legacy)", 0, XTYPE_XBOX360 },
{ 0x045e, 0x0291, "Xbox 360 Wireless Receiver (XBOX)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
{ 0x045e, 0x02d1, "Microsoft X-Box One pad", 0, XTYPE_XBOXONE },
{ 0x045e, 0x02dd, "Microsoft X-Box One pad (Firmware 2015)", 0, XTYPE_XBOXONE },
- { 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", 0, XTYPE_XBOXONE },
+ { 0x045e, 0x02e3, "Microsoft X-Box One Elite pad", MAP_PADDLES, XTYPE_XBOXONE },
+ { 0x045e, 0x0b00, "Microsoft X-Box One Elite 2 pad", MAP_PADDLES, XTYPE_XBOXONE },
{ 0x045e, 0x02ea, "Microsoft X-Box One S pad", 0, XTYPE_XBOXONE },
{ 0x045e, 0x0719, "Xbox 360 Wireless Receiver", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360W },
{ 0x045e, 0x0b12, "Microsoft Xbox Series S|X Controller", MAP_SELECT_BUTTON, XTYPE_XBOXONE },
-1
};
+/* used when the controller has extra paddle buttons */
+static const signed short xpad_btn_paddles[] = {
+ BTN_TRIGGER_HAPPY5, BTN_TRIGGER_HAPPY6, /* paddle upper right, lower right */
+ BTN_TRIGGER_HAPPY7, BTN_TRIGGER_HAPPY8, /* paddle upper left, lower left */
+ -1 /* terminating entry */
+};
+
/*
* Xbox 360 has a vendor-specific class, so we cannot match it with only
* USB_INTERFACE_INFO (also specifically refused by USB subsystem), so we
0x05, 0x20, 0x00, 0x0f, 0x06
};
+/*
+ * This packet is required to get additional input data
+ * from Xbox One Elite Series 2 (0x045e:0x0b00) pads.
+ * We mostly do this right now to get paddle data
+ */
+static const u8 extra_input_packet_init[] = {
+ 0x4d, 0x10, 0x01, 0x02, 0x07, 0x00
+};
+
/*
* This packet is required for the Titanfall 2 Xbox One pads
* (0x0e6f:0x0165) to finish initialization and for Hori pads
XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init),
XBOXONE_INIT_PKT(0x045e, 0x02ea, xboxone_s_init),
XBOXONE_INIT_PKT(0x045e, 0x0b00, xboxone_s_init),
+ XBOXONE_INIT_PKT(0x045e, 0x0b00, extra_input_packet_init),
XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init1),
XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init2),
XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init),
int mapping; /* map d-pad to buttons or to axes */
int xtype; /* type of xbox device */
+ int packet_type; /* type of the extended packet */
int pad_nr; /* the order x360 pads were attached */
const char *name; /* name of the device */
struct work_struct work; /* init/remove device from callback */
static void xpadone_process_packet(struct usb_xpad *xpad, u16 cmd, unsigned char *data)
{
struct input_dev *dev = xpad->dev;
+ bool do_sync = false;
/* the xbox button has its own special report */
if (data[0] == 0X07) {
xpadone_ack_mode_report(xpad, data[2]);
input_report_key(dev, BTN_MODE, data[4] & 0x01);
- input_sync(dev);
- return;
- }
- /* check invalid packet */
- else if (data[0] != 0X20)
- return;
-
- /* menu/view buttons */
- input_report_key(dev, BTN_START, data[4] & 0x04);
- input_report_key(dev, BTN_SELECT, data[4] & 0x08);
- if (xpad->mapping & MAP_SELECT_BUTTON)
- input_report_key(dev, KEY_RECORD, data[22] & 0x01);
- /* buttons A,B,X,Y */
- input_report_key(dev, BTN_A, data[4] & 0x10);
- input_report_key(dev, BTN_B, data[4] & 0x20);
- input_report_key(dev, BTN_X, data[4] & 0x40);
- input_report_key(dev, BTN_Y, data[4] & 0x80);
+ do_sync = true;
+ } else if (data[0] == 0X0C) {
+ /* Some packet formats force us to use this separate to poll paddle inputs */
+ if (xpad->packet_type == PKT_XBE2_FW_5_11) {
+ /* Mute paddles if controller is in a custom profile slot
+ * Checked by looking at the active profile slot to
+ * verify it's the default slot
+ */
+ if (data[19] != 0)
+ data[18] = 0;
- /* digital pad */
- if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
- /* dpad as buttons (left, right, up, down) */
- input_report_key(dev, BTN_TRIGGER_HAPPY1, data[5] & 0x04);
- input_report_key(dev, BTN_TRIGGER_HAPPY2, data[5] & 0x08);
- input_report_key(dev, BTN_TRIGGER_HAPPY3, data[5] & 0x01);
- input_report_key(dev, BTN_TRIGGER_HAPPY4, data[5] & 0x02);
- } else {
- input_report_abs(dev, ABS_HAT0X,
- !!(data[5] & 0x08) - !!(data[5] & 0x04));
- input_report_abs(dev, ABS_HAT0Y,
- !!(data[5] & 0x02) - !!(data[5] & 0x01));
- }
+ /* Elite Series 2 split packet paddle bits */
+ input_report_key(dev, BTN_TRIGGER_HAPPY5, data[18] & 0x01);
+ input_report_key(dev, BTN_TRIGGER_HAPPY6, data[18] & 0x02);
+ input_report_key(dev, BTN_TRIGGER_HAPPY7, data[18] & 0x04);
+ input_report_key(dev, BTN_TRIGGER_HAPPY8, data[18] & 0x08);
- /* TL/TR */
- input_report_key(dev, BTN_TL, data[5] & 0x10);
- input_report_key(dev, BTN_TR, data[5] & 0x20);
+ do_sync = true;
+ }
+ } else if (data[0] == 0X20) { /* The main valid packet type for inputs */
+ /* menu/view buttons */
+ input_report_key(dev, BTN_START, data[4] & 0x04);
+ input_report_key(dev, BTN_SELECT, data[4] & 0x08);
+ if (xpad->mapping & MAP_SELECT_BUTTON)
+ input_report_key(dev, KEY_RECORD, data[22] & 0x01);
+
+ /* buttons A,B,X,Y */
+ input_report_key(dev, BTN_A, data[4] & 0x10);
+ input_report_key(dev, BTN_B, data[4] & 0x20);
+ input_report_key(dev, BTN_X, data[4] & 0x40);
+ input_report_key(dev, BTN_Y, data[4] & 0x80);
+
+ /* digital pad */
+ if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
+ /* dpad as buttons (left, right, up, down) */
+ input_report_key(dev, BTN_TRIGGER_HAPPY1, data[5] & 0x04);
+ input_report_key(dev, BTN_TRIGGER_HAPPY2, data[5] & 0x08);
+ input_report_key(dev, BTN_TRIGGER_HAPPY3, data[5] & 0x01);
+ input_report_key(dev, BTN_TRIGGER_HAPPY4, data[5] & 0x02);
+ } else {
+ input_report_abs(dev, ABS_HAT0X,
+ !!(data[5] & 0x08) - !!(data[5] & 0x04));
+ input_report_abs(dev, ABS_HAT0Y,
+ !!(data[5] & 0x02) - !!(data[5] & 0x01));
+ }
- /* stick press left/right */
- input_report_key(dev, BTN_THUMBL, data[5] & 0x40);
- input_report_key(dev, BTN_THUMBR, data[5] & 0x80);
+ /* TL/TR */
+ input_report_key(dev, BTN_TL, data[5] & 0x10);
+ input_report_key(dev, BTN_TR, data[5] & 0x20);
+
+ /* stick press left/right */
+ input_report_key(dev, BTN_THUMBL, data[5] & 0x40);
+ input_report_key(dev, BTN_THUMBR, data[5] & 0x80);
+
+ if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
+ /* left stick */
+ input_report_abs(dev, ABS_X,
+ (__s16) le16_to_cpup((__le16 *)(data + 10)));
+ input_report_abs(dev, ABS_Y,
+ ~(__s16) le16_to_cpup((__le16 *)(data + 12)));
+
+ /* right stick */
+ input_report_abs(dev, ABS_RX,
+ (__s16) le16_to_cpup((__le16 *)(data + 14)));
+ input_report_abs(dev, ABS_RY,
+ ~(__s16) le16_to_cpup((__le16 *)(data + 16)));
+ }
- if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
- /* left stick */
- input_report_abs(dev, ABS_X,
- (__s16) le16_to_cpup((__le16 *)(data + 10)));
- input_report_abs(dev, ABS_Y,
- ~(__s16) le16_to_cpup((__le16 *)(data + 12)));
+ /* triggers left/right */
+ if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
+ input_report_key(dev, BTN_TL2,
+ (__u16) le16_to_cpup((__le16 *)(data + 6)));
+ input_report_key(dev, BTN_TR2,
+ (__u16) le16_to_cpup((__le16 *)(data + 8)));
+ } else {
+ input_report_abs(dev, ABS_Z,
+ (__u16) le16_to_cpup((__le16 *)(data + 6)));
+ input_report_abs(dev, ABS_RZ,
+ (__u16) le16_to_cpup((__le16 *)(data + 8)));
+ }
- /* right stick */
- input_report_abs(dev, ABS_RX,
- (__s16) le16_to_cpup((__le16 *)(data + 14)));
- input_report_abs(dev, ABS_RY,
- ~(__s16) le16_to_cpup((__le16 *)(data + 16)));
- }
+ /* paddle handling */
+ /* based on SDL's SDL_hidapi_xboxone.c */
+ if (xpad->mapping & MAP_PADDLES) {
+ if (xpad->packet_type == PKT_XBE1) {
+ /* Mute paddles if controller has a custom mapping applied.
+ * Checked by comparing the current mapping
+ * config against the factory mapping config
+ */
+ if (memcmp(&data[4], &data[18], 2) != 0)
+ data[32] = 0;
+
+ /* OG Elite Series Controller paddle bits */
+ input_report_key(dev, BTN_TRIGGER_HAPPY5, data[32] & 0x02);
+ input_report_key(dev, BTN_TRIGGER_HAPPY6, data[32] & 0x08);
+ input_report_key(dev, BTN_TRIGGER_HAPPY7, data[32] & 0x01);
+ input_report_key(dev, BTN_TRIGGER_HAPPY8, data[32] & 0x04);
+ } else if (xpad->packet_type == PKT_XBE2_FW_OLD) {
+ /* Mute paddles if controller has a custom mapping applied.
+ * Checked by comparing the current mapping
+ * config against the factory mapping config
+ */
+ if (data[19] != 0)
+ data[18] = 0;
+
+ /* Elite Series 2 4.x firmware paddle bits */
+ input_report_key(dev, BTN_TRIGGER_HAPPY5, data[18] & 0x01);
+ input_report_key(dev, BTN_TRIGGER_HAPPY6, data[18] & 0x02);
+ input_report_key(dev, BTN_TRIGGER_HAPPY7, data[18] & 0x04);
+ input_report_key(dev, BTN_TRIGGER_HAPPY8, data[18] & 0x08);
+ } else if (xpad->packet_type == PKT_XBE2_FW_5_EARLY) {
+ /* Mute paddles if controller has a custom mapping applied.
+ * Checked by comparing the current mapping
+ * config against the factory mapping config
+ */
+ if (data[23] != 0)
+ data[22] = 0;
+
+ /* Elite Series 2 5.x firmware paddle bits
+ * (before the packet was split)
+ */
+ input_report_key(dev, BTN_TRIGGER_HAPPY5, data[22] & 0x01);
+ input_report_key(dev, BTN_TRIGGER_HAPPY6, data[22] & 0x02);
+ input_report_key(dev, BTN_TRIGGER_HAPPY7, data[22] & 0x04);
+ input_report_key(dev, BTN_TRIGGER_HAPPY8, data[22] & 0x08);
+ }
+ }
- /* triggers left/right */
- if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
- input_report_key(dev, BTN_TL2,
- (__u16) le16_to_cpup((__le16 *)(data + 6)));
- input_report_key(dev, BTN_TR2,
- (__u16) le16_to_cpup((__le16 *)(data + 8)));
- } else {
- input_report_abs(dev, ABS_Z,
- (__u16) le16_to_cpup((__le16 *)(data + 6)));
- input_report_abs(dev, ABS_RZ,
- (__u16) le16_to_cpup((__le16 *)(data + 8)));
+ do_sync = true;
}
- input_sync(dev);
+ if (do_sync)
+ input_sync(dev);
}
static void xpad_irq_in(struct urb *urb)
xpad_btn_pad[i]);
}
+ /* set up paddles if the controller has them */
+ if (xpad->mapping & MAP_PADDLES) {
+ for (i = 0; xpad_btn_paddles[i] >= 0; i++)
+ input_set_capability(input_dev, EV_KEY, xpad_btn_paddles[i]);
+ }
+
/*
* This should be a simple else block. However historically
* xbox360w has mapped DPAD to buttons while xbox360 did not. This
xpad->mapping = xpad_device[i].mapping;
xpad->xtype = xpad_device[i].xtype;
xpad->name = xpad_device[i].name;
+ xpad->packet_type = PKT_XB;
INIT_WORK(&xpad->work, xpad_presence_work);
if (xpad->xtype == XTYPE_UNKNOWN) {
usb_set_intfdata(intf, xpad);
+ /* Packet type detection */
+ if (le16_to_cpu(udev->descriptor.idVendor) == 0x045e) { /* Microsoft controllers */
+ if (le16_to_cpu(udev->descriptor.idProduct) == 0x02e3) {
+ /* The original elite controller always uses the oldest
+ * type of extended packet
+ */
+ xpad->packet_type = PKT_XBE1;
+ } else if (le16_to_cpu(udev->descriptor.idProduct) == 0x0b00) {
+ /* The elite 2 controller has seen multiple packet
+ * revisions. These are tied to specific firmware
+ * versions
+ */
+ if (le16_to_cpu(udev->descriptor.bcdDevice) < 0x0500) {
+ /* This is the format that the Elite 2 used
+ * prior to the BLE update
+ */
+ xpad->packet_type = PKT_XBE2_FW_OLD;
+ } else if (le16_to_cpu(udev->descriptor.bcdDevice) <
+ 0x050b) {
+ /* This is the format that the Elite 2 used
+ * prior to the update that split the packet
+ */
+ xpad->packet_type = PKT_XBE2_FW_5_EARLY;
+ } else {
+ /* The split packet format that was introduced
+ * in firmware v5.11
+ */
+ xpad->packet_type = PKT_XBE2_FW_5_11;
+ }
+ }
+ }
+
if (xpad->xtype == XTYPE_XBOX360W) {
/*
* Submit the int URB immediately rather than waiting for open
projects / kernel.git / commitdiff