The commit
3b8f882be314 ("Convert CONFIG_ZYNQMP_PSU_INIT_ENABLED to
Kconfig") converted CONFIG_ZYNQMP_PSU_INIT_ENABLED symbol and enabled it by
default which is not correct configuration.
Intention of this config was to have it enabled by default for SPL and
provide an option to users to also do low level initialization directly
from U-Boot.
That's why it is necessary to define second symbol with SPL marking in it
and properly use symbols depends on usage in Makefile.
Also disable ZYNQMP_PSU_INIT_ENABLED from boards which enables it by
default. CONFIG_SPL_ZYNQMP_PSU_INIT_ENABLED is enabled by default when SPL
is enabled.
Reported-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/d5fcbd66b05bf0d7ef594e66464ee23b48c5e4cc.1669969083.git.michal.simek@amd.com
bool "Include psu_init"
select BOARD_EARLY_INIT_F
help
- Include psu_init to full u-boot. SPL include psu_init by default.
+ Include psu_init to full u-boot.
+
+config SPL_ZYNQMP_PSU_INIT_ENABLED
+ bool "Include psu_init in SPL"
+ default y if SPL
+ select BOARD_EARLY_INIT_F
+ help
+ Include psu_init by default in SPL.
config SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
bool "Overwrite SPL bootmode"
obj-$(CONFIG_MP) += mp.o
obj-$(CONFIG_SPL_BUILD) += spl.o handoff.o psu_spl_init.o
obj-$(CONFIG_SPL_ZYNQMP_DRAM_ECC_INIT) += ecc_spl_init.o
-obj-$(CONFIG_ZYNQMP_PSU_INIT_ENABLED) += psu_spl_init.o
+obj-$(CONFIG_$(SPL_)ZYNQMP_PSU_INIT_ENABLED) += psu_spl_init.o
endif
endif
-ifdef_any_of = $(filter-out undefined,$(foreach v,$(1),$(origin $(v))))
-
-ifneq ($(call ifdef_any_of, CONFIG_ZYNQMP_PSU_INIT_ENABLED CONFIG_SPL_BUILD),)
-obj-y += $(init-objs)
-endif
+obj-$(CONFIG_$(SPL_)ZYNQMP_PSU_INIT_ENABLED) += $(init-objs)
ifdef CONFIG_SPL_BUILD
ifneq ($(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE),"")
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
-CONFIG_ZYNQMP_PSU_INIT_ENABLED=y
CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_DEBUG_UART=y
CONFIG_SYS_MEMTEST_START=0x00000000
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini"
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
-CONFIG_ZYNQMP_PSU_INIT_ENABLED=y
# CONFIG_CMD_ZYNQMP is not set
CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_SYS_MEMTEST_START=0x00000000
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-emmc0"
CONFIG_SPL_SYS_MALLOC_F_LEN=0x600
CONFIG_SPL=y
-CONFIG_ZYNQMP_PSU_INIT_ENABLED=y
# CONFIG_CMD_ZYNQMP is not set
CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-emmc1"
CONFIG_SPL_SYS_MALLOC_F_LEN=0x600
CONFIG_SPL=y
-CONFIG_ZYNQMP_PSU_INIT_ENABLED=y
# CONFIG_CMD_ZYNQMP is not set
CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand"
-CONFIG_ZYNQMP_PSU_INIT_ENABLED=y
# CONFIG_CMD_ZYNQMP is not set
CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand"
-CONFIG_ZYNQMP_PSU_INIT_ENABLED=y
# CONFIG_CMD_ZYNQMP is not set
CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_SPL=y
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
CONFIG_ZYNQMP_NO_DDR=y
-CONFIG_ZYNQMP_PSU_INIT_ENABLED=y
# CONFIG_CMD_ZYNQMP is not set
# CONFIG_PSCI_RESET is not set
CONFIG_SYS_LOAD_ADDR=0x8000000