]> git.baikalelectronics.ru Git - kernel.git/commitdiff
openrisc: Fix issue with get_user for 64-bit values
authorStafford Horne <shorne@gmail.com>
Wed, 2 Sep 2020 20:54:40 +0000 (05:54 +0900)
committerStafford Horne <shorne@gmail.com>
Sat, 12 Sep 2020 08:26:00 +0000 (17:26 +0900)
A build failure was raised by kbuild with the following error.

    drivers/android/binder.c: Assembler messages:
    drivers/android/binder.c:3861: Error: unrecognized keyword/register name `l.lwz ?ap,4(r24)'
    drivers/android/binder.c:3866: Error: unrecognized keyword/register name `l.addi ?ap,r0,0'

The issue is with 64-bit get_user() calls on openrisc.  I traced this to
a problem where in the internally in the get_user macros there is a cast
to long __gu_val this causes GCC to think the get_user call is 32-bit.
This binder code is really long and GCC allocates register r30, which
triggers the issue. The 64-bit get_user asm tries to get the 64-bit pair
register, which for r30 overflows the general register names and returns
the dummy register ?ap.

The fix here is to move the temporary variables into the asm macros.  We
use a 32-bit __gu_tmp for 32-bit and smaller macro and a 64-bit tmp in
the 64-bit macro.  The cast in the 64-bit macro has a trick of casting
through __typeof__((x)-(x)) which avoids the below warning.  This was
barrowed from riscv.

    arch/openrisc/include/asm/uaccess.h:240:8: warning: cast to pointer from integer of different size

I tested this in a small unit test to check reading between 64-bit and
32-bit pointers to 64-bit and 32-bit values in all combinations.  Also I
ran make C=1 to confirm no new sparse warnings came up.  It all looks
clean to me.

Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
arch/openrisc/include/asm/uaccess.h

index f0390211236bfae0f5b438b73e8a3e9cbbdd1454..120f5005461b812466cf351ea4b3de5c3efb9ac9 100644 (file)
@@ -165,19 +165,19 @@ struct __large_struct {
 
 #define __get_user_nocheck(x, ptr, size)                       \
 ({                                                             \
-       long __gu_err, __gu_val;                                \
-       __get_user_size(__gu_val, (ptr), (size), __gu_err);     \
-       (x) = (__force __typeof__(*(ptr)))__gu_val;             \
+       long __gu_err;                                          \
+       __get_user_size((x), (ptr), (size), __gu_err);          \
        __gu_err;                                               \
 })
 
 #define __get_user_check(x, ptr, size)                                 \
 ({                                                                     \
-       long __gu_err = -EFAULT, __gu_val = 0;                          \
+       long __gu_err = -EFAULT;                                        \
        const __typeof__(*(ptr)) __user *__gu_addr = (ptr);             \
-       if (access_ok(__gu_addr, size))                 \
-               __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \
-       (x) = (__force __typeof__(*(ptr)))__gu_val;                     \
+       if (access_ok(__gu_addr, size))                                 \
+               __get_user_size((x), __gu_addr, (size), __gu_err);      \
+       else                                                            \
+               (x) = (__typeof__(*(ptr))) 0;                           \
        __gu_err;                                                       \
 })
 
@@ -191,11 +191,13 @@ do {                                                                      \
        case 2: __get_user_asm(x, ptr, retval, "l.lhz"); break;         \
        case 4: __get_user_asm(x, ptr, retval, "l.lwz"); break;         \
        case 8: __get_user_asm2(x, ptr, retval); break;                 \
-       default: (x) = __get_user_bad();                                \
+       default: (x) = (__typeof__(*(ptr)))__get_user_bad();            \
        }                                                               \
 } while (0)
 
 #define __get_user_asm(x, addr, err, op)               \
+{                                                      \
+       unsigned long __gu_tmp;                         \
        __asm__ __volatile__(                           \
                "1:     "op" %1,0(%2)\n"                \
                "2:\n"                                  \
@@ -209,10 +211,14 @@ do {                                                                      \
                "       .align 2\n"                     \
                "       .long 1b,3b\n"                  \
                ".previous"                             \
-               : "=r"(err), "=r"(x)                    \
-               : "r"(addr), "i"(-EFAULT), "0"(err))
+               : "=r"(err), "=r"(__gu_tmp)             \
+               : "r"(addr), "i"(-EFAULT), "0"(err));   \
+       (x) = (__typeof__(*(addr)))__gu_tmp;            \
+}
 
 #define __get_user_asm2(x, addr, err)                  \
+{                                                      \
+       unsigned long long __gu_tmp;                    \
        __asm__ __volatile__(                           \
                "1:     l.lwz %1,0(%2)\n"               \
                "2:     l.lwz %H1,4(%2)\n"              \
@@ -229,8 +235,11 @@ do {                                                                       \
                "       .long 1b,4b\n"                  \
                "       .long 2b,4b\n"                  \
                ".previous"                             \
-               : "=r"(err), "=&r"(x)                   \
-               : "r"(addr), "i"(-EFAULT), "0"(err))
+               : "=r"(err), "=&r"(__gu_tmp)            \
+               : "r"(addr), "i"(-EFAULT), "0"(err));   \
+       (x) = (__typeof__(*(addr)))(                    \
+               (__typeof__((x)-(x)))__gu_tmp);         \
+}
 
 /* more complex routines */