help
Support for STM32MP SoC family developed by STMicroelectronics,
MPUs based on ARM cortex A core
- U-BOOT is running in DDR and SPL support is the unsecure First Stage
- BootLoader (FSBL)
+ U-BOOT is running in DDR, loaded by the First Stage BootLoader (FSBL).
+ FSBL can be TF-A: Trusted Firmware for Cortex A, for trusted boot
+ chain.
+ SPL is the unsecure FSBL for the basic boot chain.
config ARCH_ROCKCHIP
bool "Support Rockchip SoCs"
config TARGET_STM32MP1
bool "Support stm32mp1xx"
- select ARCH_SUPPORT_PSCI
+ select ARCH_SUPPORT_PSCI if !STM32MP1_TRUSTED
select CPU_V7A
- select CPU_V7_HAS_NONSEC
+ select CPU_V7_HAS_NONSEC if !STM32MP1_TRUSTED
select CPU_V7_HAS_VIRT
select PINCTRL_STM32
select STM32_RCC
select STM32_RESET
select SYS_ARCH_TIMER
- select SYSRESET_SYSCON
+ imply SYSRESET_PSCI if STM32MP1_TRUSTED
+ imply SYSRESET_SYSCON if !STM32MP1_TRUSTED
help
target STMicroelectronics SOC STM32MP1 family
STMicroelectronics MPU with core ARMv7
+config STM32MP1_TRUSTED
+ bool "Support trusted boot with TF-A"
+ default y if !SPL
+ select ARM_SMCCC
+ help
+ Say Y here to enable boot with TF-A
+ Trusted boot chain is :
+ BootRom => TF-A.stm32 (clock & DDR) => U-Boot.stm32
+ TF-A monitor provides proprietary smc to manage secure devices
+
config SYS_TEXT_BASE
prompt "U-Boot base address"
default 0xC0100000
# Copyright (C) 2018, STMicroelectronics - All Rights Reserved
#
-ALL-$(CONFIG_SPL_BUILD) += u-boot-spl.stm32
+ifndef CONFIG_SPL
+ALL-y += u-boot.stm32
+else
+ifdef CONFIG_SPL_BUILD
+ALL-y += u-boot-spl.stm32
+endif
+endif
+
+MKIMAGEFLAGS_u-boot.stm32 = -T stm32image -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
+
+u-boot.stm32: MKIMAGEOUTPUT = u-boot.stm32.log
+
+u-boot.stm32: u-boot.bin FORCE
+ $(call if_changed,mkimage)
MKIMAGEFLAGS_u-boot-spl.stm32 = -T stm32image -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE)
#define BSEC_OTP_MAC 57
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+#ifndef CONFIG_STM32MP1_TRUSTED
static void security_init(void)
{
/* Disable the backup domain write protection */
*/
writel(0x0, TAMP_CR1);
}
+#endif /* CONFIG_STM32MP1_TRUSTED */
/*
* Debug init
static u32 get_bootmode(void)
{
u32 boot_mode;
-#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_STM32MP1_TRUSTED) && \
+ (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR);
u32 bootrom_device, bootrom_instance;
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
dbgmcu_init();
-
+#ifndef CONFIG_STM32MP1_TRUSTED
security_init();
+#endif
#endif
/* get bootmode from BootRom context: saved in TAMP register */
if ((boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART)
gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
#if defined(CONFIG_DEBUG_UART) && \
+ !defined(CONFIG_STM32MP1_TRUSTED) && \
(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
else
debug_uart_init();
M: Patrick Delaunay <patrick.delaunay@st.com>
L: uboot-stm32@st-md-mailman.stormreply.com (moderated for non-subscribers)
S: Maintained
+F: arch/arm/dts/stm32mp157*
F: board/st/stm32mp1
-F: include/configs/stm32mp1.h
F: configs/stm32mp15_basic_defconfig
-F: arch/arm/dts/stm32mp157*
+F: configs/stm32mp15_trusted_defconfig
+F: include/configs/stm32mp1.h
And the necessary drivers
1. I2C
-2. STPMU1
2. STPMU1 (PMIC and regulator)
3. Clock, Reset, Sysreset
4. Fuse
with FSBL = First Stage Bootloader
SSBL = Second Stage Bootloader
-One boot configuration is supported:
+2 boot configurations are supported:
- The "Basic" boot chain (defconfig_file : stm32mp15_basic_defconfig)
+1) The "Trusted" boot chain (defconfig_file : stm32mp15_trusted_defconfig)
+ BootRom => FSBL = Trusted Firmware-A (TF-A) => SSBL = U-Boot
+ TF-A performs a full initialization of Secure peripherals and installs a
+ secure monitor.
+ U-Boot is running in normal world and uses TF-A monitor
+ to access to secure resources
+
+2) The "Basic" boot chain (defconfig_file : stm32mp15_basic_defconfig)
BootRom => FSBL = U-Boot SPL => SSBL = U-Boot
SPL has limited security initialisation
U-Boot is running in secure mode and provide a secure monitor to the kernel
with only PSCI support (Power State Coordination Interface defined by ARM)
-All the STM32MP1 board supported by U-Boot use the same generic board
+All the STM32MP1 boards supported by U-Boot use the same generic board
stm32mp1 which support all the bootable devices.
Each board is configurated only with the associated device tree.
# export KBUILD_OUTPUT=/path/to/output
for example: use one output directory for each configuration
+ # export KBUILD_OUTPUT=stm32mp15_trusted
# export KBUILD_OUTPUT=stm32mp15_basic
-4. Configure the U-Boot:
+4. Configure U-Boot:
# make <defconfig_file>
+ - For trusted boot mode : "stm32mp15_trusted_defconfig"
- For basic boot mode: "stm32mp15_basic_defconfig"
5. Configure the device-tree and build the U-Boot image:
example:
- basic boot on ev1
+ a) trusted boot on ev1
+ # export KBUILD_OUTPUT=stm32mp15_trusted
+ # make stm32mp15_trusted_defconfig
+ # make DEVICE_TREE=stm32mp157c-ev1 all
+
+ b) basic boot on ev1
# export KBUILD_OUTPUT=stm32mp15_basic
# make stm32mp15_basic_defconfig
# make DEVICE_TREE=stm32mp157c-ev1 all
- basic boot on ed1
+ c) basic boot on ed1
# export KBUILD_OUTPUT=stm32mp15_basic
# make stm32mp15_basic_defconfig
# make DEVICE_TREE=stm32mp157c-ed1 all
So in the output directory (selected by KBUILD_OUTPUT),
you can found the needed files:
+ a) For Trusted boot
+ + FSBL = tf-a.stm32 (provided by TF-A compilation)
+ + SSBL = u-boot.stm32
+
+ b) For Basic boot
+ FSBL = spl/u-boot-spl.stm32
+ SSBL = u-boot.img
-----------------------------------
Reserved 0 0 0
NOR 0 0 1
- SD-Card 1 1 1
SD-Card 1 0 1
eMMC 0 1 0
NAND 0 1 1
- one ssbl partition for U-Boot
Then the minimal GPT partition is:
- ----- ------- --------- -------------
- | Num | Name | Size | Content |
- ----- ------- -------- --------------
+ ----- ------- --------- --------------
+ | Num | Name | Size | Content |
+ ----- ------- -------- ---------------
| 1 | fsbl1 | 256 KiB | TF-A or SPL |
| 2 | fsbl2 | 256 KiB | TF-A or SPL |
- | 3 | ssbl | enought | U-Boot |
- | * | - | - | Boot/Rootfs|
- ----- ------- --------- -------------
+ | 3 | ssbl | enought | U-Boot |
+ | * | - | - | Boot/Rootfs |
+ ----- ------- --------- --------------
(*) add bootable partition for extlinux.conf
following Generic Distribution
you can add other partitions for kernel
one partition rootfs for example:
- -n 3:5154: -c 4:rootfs
+ -n 4:5154: -c 4:rootfs \
c) copy the FSBL (2 times) and SSBL file on the correct partition.
in this example in partition 1 to 3
# dd if=u-boot-spl.stm32 of=/dev/mmcblk0p2
# dd if=u-boot.img of=/dev/mmcblk0p3
+ for trusted boot mode :
+ # dd if=tf-a.stm32 of=/dev/mmcblk0p1
+ # dd if=tf-a.stm32 of=/dev/mmcblk0p2
+ # dd if=u-boot.stm32 of=/dev/mmcblk0p3
+
To boot from SDCard, select BootPinMode = 1 1 1 and reset.
8. Prepare eMMC
In the next example, you need to boot from SDCARD and the images (u-boot-spl.stm32, u-boot.img)
are presents on SDCARD (mmc 0) in ext4 partition 4 (bootfs).
-To boot from SDCard, select BootPinMode = 1 1 1 and reset.
+To boot from SDCard, select BootPinMode = 1 0 1 and reset.
Then you update the eMMC with the next U-Boot command :
# mmc write ${fileaddr} 0 200
# mmc partconf 1 1 1 0
-b) copy U-Boot in first GPT partition of eMMC
+c) copy U-Boot in first GPT partition of eMMC
# ext4load mmc 0:4 0xC0000000 u-boot.img
# mmc dev 1
--- /dev/null
+CONFIG_ARM=y
+CONFIG_ARCH_STM32MP=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_TARGET_STM32MP1=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_PROMPT="STM32MP> "
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_ADC=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_FUSE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_PMIC=y
+CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1"
+CONFIG_STM32_ADC=y
+CONFIG_DM_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_STM32=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_STM32F7=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_DM_MMC=y
+CONFIG_STM32_SDMMC2=y
+CONFIG_PHY=y
+CONFIG_PHY_STM32_USBPHYC=y
+# CONFIG_PINCTRL_FULL is not set
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_STPMU1=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_DM_REGULATOR_STM32_VREFBUF=y
+CONFIG_DM_REGULATOR_STPMU1=y
+CONFIG_SERIAL_RX_BUFFER=y
+CONFIG_STM32_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="STMicroelectronics"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0483
+CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_USB_GADGET_DOWNLOAD=y
#include <dt-bindings/clock/stm32mp1-clks.h>
#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#ifndef CONFIG_STM32MP1_TRUSTED
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
/* activate clock tree initialization in the driver */
#define STM32MP1_CLOCK_TREE_INIT
#endif
+#endif
#define MAX_HSI_HZ 64000000
priv->info.base = STM32_DDR_BASE;
-#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+#if !defined(CONFIG_STM32MP1_TRUSTED) && \
+ (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
priv->info.size = 0;
return stm32mp1_ddr_setup(dev);
#else
*/
#define CONFIG_SYS_HZ 1000
+#ifndef CONFIG_STM32MP1_TRUSTED
/* PSCI support */
#define CONFIG_ARMV7_PSCI_1_0
#define CONFIG_ARMV7_SECURE_BASE STM32_SYSRAM_BASE
#define CONFIG_ARMV7_SECURE_MAX_SIZE STM32_SYSRAM_SIZE
+#endif
/*
* malloc() pool size
projects / uboot.git / commitdiff