static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs, unsigned int mode)
{
- int ret;
+ int ret, mdio_ctrl;
/* For AN for C37 SGMII mode, the settings are :-
- * 1) VR_MII_AN_CTRL Bit(2:1)[PCS_MODE] = 10b (SGMII AN)
- * 2) VR_MII_AN_CTRL Bit(3) [TX_CONFIG] = 0b (MAC side SGMII)
+ * 1) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 0b (Disable SGMII AN in case
+ it is already enabled)
+ * 2) VR_MII_AN_CTRL Bit(2:1)[PCS_MODE] = 10b (SGMII AN)
+ * 3) VR_MII_AN_CTRL Bit(3) [TX_CONFIG] = 0b (MAC side SGMII)
* DW xPCS used with DW EQoS MAC is always MAC side SGMII.
- * 3) VR_MII_DIG_CTRL1 Bit(9) [MAC_AUTO_SW] = 1b (Automatic
+ * 4) VR_MII_DIG_CTRL1 Bit(9) [MAC_AUTO_SW] = 1b (Automatic
* speed/duplex mode change by HW after SGMII AN complete)
+ * 5) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 1b (Enable SGMII AN)
*
* Note: Since it is MAC side SGMII, there is no need to set
* SR_MII_AN_ADV. MAC side SGMII receives AN Tx Config from
* between PHY and Link Partner. There is also no need to
* trigger AN restart for MAC-side SGMII.
*/
+ mdio_ctrl = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL);
+ if (mdio_ctrl < 0)
+ return mdio_ctrl;
+
+ if (mdio_ctrl & AN_CL37_EN) {
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL,
+ mdio_ctrl & ~AN_CL37_EN);
+ if (ret < 0)
+ return ret;
+ }
+
ret = xpcs_read(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_CTRL);
if (ret < 0)
return ret;
else
ret &= ~DW_VR_MII_DIG_CTRL1_MAC_AUTO_SW;
- return xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret);
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_DIG_CTRL1, ret);
+ if (ret < 0)
+ return ret;
+
+ if (phylink_autoneg_inband(mode))
+ ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_MMD_CTRL,
+ mdio_ctrl | AN_CL37_EN);
+
+ return ret;
}
static int xpcs_config_2500basex(struct dw_xpcs *xpcs)