ath5k: Allow user/driver to set txpower

* Now that we have regulatory control enable the driver to set
 txpower on hw

 * Also use txpower table offset so that we can match
 power range set by user/driver with indices on power table.

 Tested 2 different cards (a CM9 and an RF5112-based ubnt) and got
 the same output using a remote machine to measure per-packet rssi
 (conected the cards using attenuators). I also switched between
 various tx power levels and i saw an equal power change on the remote
 machine (so txpower changes as expected) and verified that we have
 the same output on each rate.

 Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
 Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 60c6d2edc4b91fdeec8e6c41661eff4d31cfb8c2..04b73453f6a5267e3fed511420df10a789dcedd3 100644 (file)
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -1100,11 +1100,12 @@ struct ath5k_hw {
                /* Values in 0.25dB units */
                s16             txp_min_pwr;
                s16             txp_max_pwr;
+               /* Values in 0.5dB units */
                s16             txp_offset;
                s16             txp_ofdm;
-               /* Values in dB units */
-               s16             txp_cck_ofdm_pwr_delta;
                s16             txp_cck_ofdm_gainf_delta;
+               /* Value in dB units */
+               s16             txp_cck_ofdm_pwr_delta;
        } ah_txpower;
 
        struct {
@@ -1271,7 +1272,7 @@ extern unsigned int ath5k_hw_get_def_antenna(struct ath5k_hw *ah);
 extern int ath5k_hw_phy_disable(struct ath5k_hw *ah);
 /* TX power setup */
 extern int ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel, u8 ee_mode, u8 txpower);
-extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 ee_mode, u8 txpower);
+extern int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower);
 
 /*
  * Functions used internaly

diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 7b80cebffd41b02c607e14db76e7f4b57d4f7c09..d70856a9520e54b2ab023aacaeadc4d8e47bca77 100644 (file)
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -2747,12 +2747,21 @@ static int
 ath5k_config(struct ieee80211_hw *hw, u32 changed)
 {
        struct ath5k_softc *sc = hw->priv;
+       struct ath5k_hw *ah = sc->ah;
        struct ieee80211_conf *conf = &hw->conf;
        int ret;
 
        mutex_lock(&sc->lock);
 
-       sc->power_level = conf->power_level;
+       sc->bintval = conf->beacon_int;
+
+       if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
+       (sc->power_level != conf->power_level)) {
+               sc->power_level = conf->power_level;
+
+               /* Half dB steps */
+               ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
+       }
 
        ret = ath5k_chan_set(sc, conf->channel);
 

diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index b48b29dca3d2a6b70ad1e08479d12dea51f5a69d..bb61b8e2dce9081e00963bad1fb9e50b97a20f3d 100644 (file)
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -168,9 +168,6 @@ int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
  * tx power and a Peak to Average Power Detector (PAPD) will try
  * to measure the gain.
  *
- * TODO: Use propper tx power setting for the probe packet so
- * that we don't observe a serious power drop on the receiver
- *
  * XXX:  How about forcing a tx packet (bypassing PCU arbitrator etc)
  * just after we enable the probe so that we don't mess with
  * standard traffic ? Maybe it's time to use sw interrupts and
@@ -186,7 +183,7 @@ static void ath5k_hw_request_rfgain_probe(struct ath5k_hw *ah)
 
        /* Send the packet with 2dB below max power as
         * patent doc suggest */
-       ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_max_pwr - 4,
+       ath5k_hw_reg_write(ah, AR5K_REG_SM(ah->ah_txpower.txp_ofdm - 4,
                        AR5K_PHY_PAPD_PROBE_TXPOWER) |
                        AR5K_PHY_PAPD_PROBE_TX_NEXT, AR5K_PHY_PAPD_PROBE);
 
@@ -2482,8 +2479,19 @@ ath5k_setup_rate_powertable(struct ath5k_hw *ah, u16 max_pwr,
                for (i = 8; i <= 15; i++)
                        rates[i] -= ah->ah_txpower.txp_cck_ofdm_gainf_delta;
 
-       ah->ah_txpower.txp_min_pwr = rates[7];
-       ah->ah_txpower.txp_max_pwr = rates[0];
+       /* Now that we have all rates setup use table offset to
+        * match the power range set by user with the power indices
+        * on PCDAC/PDADC table */
+       for (i = 0; i < 16; i++) {
+               rates[i] += ah->ah_txpower.txp_offset;
+               /* Don't get out of bounds */
+               if (rates[i] > 63)
+                       rates[i] = 63;
+       }
+
+       /* Min/max in 0.25dB units */
+       ah->ah_txpower.txp_min_pwr = 2 * rates[7];
+       ah->ah_txpower.txp_max_pwr = 2 * rates[0];
        ah->ah_txpower.txp_ofdm = rates[7];
 }
 
@@ -2591,16 +2599,37 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
        return 0;
 }
 
-int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 mode, u8 txpower)
+int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower)
 {
        /*Just a try M.F.*/
        struct ieee80211_channel *channel = &ah->ah_current_channel;
+       u8 ee_mode;
 
        ATH5K_TRACE(ah->ah_sc);
+
+       switch (channel->hw_value & CHANNEL_MODES) {
+       case CHANNEL_A:
+       case CHANNEL_T:
+       case CHANNEL_XR:
+               ee_mode = AR5K_EEPROM_MODE_11A;
+               break;
+       case CHANNEL_G:
+       case CHANNEL_TG:
+               ee_mode = AR5K_EEPROM_MODE_11G;
+               break;
+       case CHANNEL_B:
+               ee_mode = AR5K_EEPROM_MODE_11B;
+               break;
+       default:
+               ATH5K_ERR(ah->ah_sc,
+                       "invalid channel: %d\n", channel->center_freq);
+               return -EINVAL;
+       }
+
        ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_TXPOWER,
                "changing txpower to %d\n", txpower);
 
-       return ath5k_hw_txpower(ah, channel, mode, txpower);
+       return ath5k_hw_txpower(ah, channel, ee_mode, txpower);
 }
 
 #undef _ATH5K_PHY

diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 775fdf78554bea0fd1533c87d2511e9ae6e56916..cb8a9a1398c95b461029473d1254a60374db87a6 100644 (file)
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -1000,7 +1000,7 @@ int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
                 * Set TX power (FIXME)
                 */
                ret = ath5k_hw_txpower(ah, channel, ee_mode,
-                                       AR5K_TUNE_DEFAULT_TXPOWER);
+                                       ah->ah_txpower.txp_max_pwr / 2);
                if (ret)
                        return ret;