--- /dev/null
- req->cmd_flags |= REQ_QUIET;
+ /*
+ * Block driver for media (i.e., flash cards)
+ *
+ * Copyright 2002 Hewlett-Packard Company
+ * Copyright 2005-2008 Pierre Ossman
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * HEWLETT-PACKARD COMPANY MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Many thanks to Alessandro Rubini and Jonathan Corbet!
+ *
+ * Author: Andrew Christian
+ * 28 May 2002
+ */
+ #include <linux/moduleparam.h>
+ #include <linux/module.h>
+ #include <linux/init.h>
+
+ #include <linux/kernel.h>
+ #include <linux/fs.h>
+ #include <linux/slab.h>
+ #include <linux/errno.h>
+ #include <linux/hdreg.h>
+ #include <linux/kdev_t.h>
+ #include <linux/blkdev.h>
+ #include <linux/mutex.h>
+ #include <linux/scatterlist.h>
+ #include <linux/string_helpers.h>
+ #include <linux/delay.h>
+ #include <linux/capability.h>
+ #include <linux/compat.h>
+ #include <linux/pm_runtime.h>
+ #include <linux/idr.h>
+
+ #include <linux/mmc/ioctl.h>
+ #include <linux/mmc/card.h>
+ #include <linux/mmc/host.h>
+ #include <linux/mmc/mmc.h>
+ #include <linux/mmc/sd.h>
+
+ #include <asm/uaccess.h>
+
+ #include "queue.h"
+ #include "block.h"
+
+ MODULE_ALIAS("mmc:block");
+ #ifdef MODULE_PARAM_PREFIX
+ #undef MODULE_PARAM_PREFIX
+ #endif
+ #define MODULE_PARAM_PREFIX "mmcblk."
+
+ #define INAND_CMD38_ARG_EXT_CSD 113
+ #define INAND_CMD38_ARG_ERASE 0x00
+ #define INAND_CMD38_ARG_TRIM 0x01
+ #define INAND_CMD38_ARG_SECERASE 0x80
+ #define INAND_CMD38_ARG_SECTRIM1 0x81
+ #define INAND_CMD38_ARG_SECTRIM2 0x88
+ #define MMC_BLK_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */
+ #define MMC_SANITIZE_REQ_TIMEOUT 240000
+ #define MMC_EXTRACT_INDEX_FROM_ARG(x) ((x & 0x00FF0000) >> 16)
+
+ #define mmc_req_rel_wr(req) ((req->cmd_flags & REQ_FUA) && \
+ (rq_data_dir(req) == WRITE))
+ static DEFINE_MUTEX(block_mutex);
+
+ /*
+ * The defaults come from config options but can be overriden by module
+ * or bootarg options.
+ */
+ static int perdev_minors = CONFIG_MMC_BLOCK_MINORS;
+
+ /*
+ * We've only got one major, so number of mmcblk devices is
+ * limited to (1 << 20) / number of minors per device. It is also
+ * limited by the MAX_DEVICES below.
+ */
+ static int max_devices;
+
+ #define MAX_DEVICES 256
+
+ static DEFINE_IDA(mmc_blk_ida);
+ static DEFINE_SPINLOCK(mmc_blk_lock);
+
+ /*
+ * There is one mmc_blk_data per slot.
+ */
+ struct mmc_blk_data {
+ spinlock_t lock;
+ struct device *parent;
+ struct gendisk *disk;
+ struct mmc_queue queue;
+ struct list_head part;
+
+ unsigned int flags;
+ #define MMC_BLK_CMD23 (1 << 0) /* Can do SET_BLOCK_COUNT for multiblock */
+ #define MMC_BLK_REL_WR (1 << 1) /* MMC Reliable write support */
+
+ unsigned int usage;
+ unsigned int read_only;
+ unsigned int part_type;
+ unsigned int reset_done;
+ #define MMC_BLK_READ BIT(0)
+ #define MMC_BLK_WRITE BIT(1)
+ #define MMC_BLK_DISCARD BIT(2)
+ #define MMC_BLK_SECDISCARD BIT(3)
+
+ /*
+ * Only set in main mmc_blk_data associated
+ * with mmc_card with dev_set_drvdata, and keeps
+ * track of the current selected device partition.
+ */
+ unsigned int part_curr;
+ struct device_attribute force_ro;
+ struct device_attribute power_ro_lock;
+ int area_type;
+ };
+
+ static DEFINE_MUTEX(open_lock);
+
+ module_param(perdev_minors, int, 0444);
+ MODULE_PARM_DESC(perdev_minors, "Minors numbers to allocate per device");
+
+ static inline int mmc_blk_part_switch(struct mmc_card *card,
+ struct mmc_blk_data *md);
+ static int get_card_status(struct mmc_card *card, u32 *status, int retries);
+
+ static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk)
+ {
+ struct mmc_blk_data *md;
+
+ mutex_lock(&open_lock);
+ md = disk->private_data;
+ if (md && md->usage == 0)
+ md = NULL;
+ if (md)
+ md->usage++;
+ mutex_unlock(&open_lock);
+
+ return md;
+ }
+
+ static inline int mmc_get_devidx(struct gendisk *disk)
+ {
+ int devidx = disk->first_minor / perdev_minors;
+ return devidx;
+ }
+
+ static void mmc_blk_put(struct mmc_blk_data *md)
+ {
+ mutex_lock(&open_lock);
+ md->usage--;
+ if (md->usage == 0) {
+ int devidx = mmc_get_devidx(md->disk);
+ blk_cleanup_queue(md->queue.queue);
+
+ spin_lock(&mmc_blk_lock);
+ ida_remove(&mmc_blk_ida, devidx);
+ spin_unlock(&mmc_blk_lock);
+
+ put_disk(md->disk);
+ kfree(md);
+ }
+ mutex_unlock(&open_lock);
+ }
+
+ static ssize_t power_ro_lock_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+ {
+ int ret;
+ struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev));
+ struct mmc_card *card = md->queue.card;
+ int locked = 0;
+
+ if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PERM_WP_EN)
+ locked = 2;
+ else if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PWR_WP_EN)
+ locked = 1;
+
+ ret = snprintf(buf, PAGE_SIZE, "%d\n", locked);
+
+ mmc_blk_put(md);
+
+ return ret;
+ }
+
+ static ssize_t power_ro_lock_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+ {
+ int ret;
+ struct mmc_blk_data *md, *part_md;
+ struct mmc_card *card;
+ unsigned long set;
+
+ if (kstrtoul(buf, 0, &set))
+ return -EINVAL;
+
+ if (set != 1)
+ return count;
+
+ md = mmc_blk_get(dev_to_disk(dev));
+ card = md->queue.card;
+
+ mmc_get_card(card);
+
+ ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_BOOT_WP,
+ card->ext_csd.boot_ro_lock |
+ EXT_CSD_BOOT_WP_B_PWR_WP_EN,
+ card->ext_csd.part_time);
+ if (ret)
+ pr_err("%s: Locking boot partition ro until next power on failed: %d\n", md->disk->disk_name, ret);
+ else
+ card->ext_csd.boot_ro_lock |= EXT_CSD_BOOT_WP_B_PWR_WP_EN;
+
+ mmc_put_card(card);
+
+ if (!ret) {
+ pr_info("%s: Locking boot partition ro until next power on\n",
+ md->disk->disk_name);
+ set_disk_ro(md->disk, 1);
+
+ list_for_each_entry(part_md, &md->part, part)
+ if (part_md->area_type == MMC_BLK_DATA_AREA_BOOT) {
+ pr_info("%s: Locking boot partition ro until next power on\n", part_md->disk->disk_name);
+ set_disk_ro(part_md->disk, 1);
+ }
+ }
+
+ mmc_blk_put(md);
+ return count;
+ }
+
+ static ssize_t force_ro_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+ {
+ int ret;
+ struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev));
+
+ ret = snprintf(buf, PAGE_SIZE, "%d\n",
+ get_disk_ro(dev_to_disk(dev)) ^
+ md->read_only);
+ mmc_blk_put(md);
+ return ret;
+ }
+
+ static ssize_t force_ro_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+ {
+ int ret;
+ char *end;
+ struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev));
+ unsigned long set = simple_strtoul(buf, &end, 0);
+ if (end == buf) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ set_disk_ro(dev_to_disk(dev), set || md->read_only);
+ ret = count;
+ out:
+ mmc_blk_put(md);
+ return ret;
+ }
+
+ static int mmc_blk_open(struct block_device *bdev, fmode_t mode)
+ {
+ struct mmc_blk_data *md = mmc_blk_get(bdev->bd_disk);
+ int ret = -ENXIO;
+
+ mutex_lock(&block_mutex);
+ if (md) {
+ if (md->usage == 2)
+ check_disk_change(bdev);
+ ret = 0;
+
+ if ((mode & FMODE_WRITE) && md->read_only) {
+ mmc_blk_put(md);
+ ret = -EROFS;
+ }
+ }
+ mutex_unlock(&block_mutex);
+
+ return ret;
+ }
+
+ static void mmc_blk_release(struct gendisk *disk, fmode_t mode)
+ {
+ struct mmc_blk_data *md = disk->private_data;
+
+ mutex_lock(&block_mutex);
+ mmc_blk_put(md);
+ mutex_unlock(&block_mutex);
+ }
+
+ static int
+ mmc_blk_getgeo(struct block_device *bdev, struct hd_geometry *geo)
+ {
+ geo->cylinders = get_capacity(bdev->bd_disk) / (4 * 16);
+ geo->heads = 4;
+ geo->sectors = 16;
+ return 0;
+ }
+
+ struct mmc_blk_ioc_data {
+ struct mmc_ioc_cmd ic;
+ unsigned char *buf;
+ u64 buf_bytes;
+ };
+
+ static struct mmc_blk_ioc_data *mmc_blk_ioctl_copy_from_user(
+ struct mmc_ioc_cmd __user *user)
+ {
+ struct mmc_blk_ioc_data *idata;
+ int err;
+
+ idata = kmalloc(sizeof(*idata), GFP_KERNEL);
+ if (!idata) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ if (copy_from_user(&idata->ic, user, sizeof(idata->ic))) {
+ err = -EFAULT;
+ goto idata_err;
+ }
+
+ idata->buf_bytes = (u64) idata->ic.blksz * idata->ic.blocks;
+ if (idata->buf_bytes > MMC_IOC_MAX_BYTES) {
+ err = -EOVERFLOW;
+ goto idata_err;
+ }
+
+ if (!idata->buf_bytes) {
+ idata->buf = NULL;
+ return idata;
+ }
+
+ idata->buf = kmalloc(idata->buf_bytes, GFP_KERNEL);
+ if (!idata->buf) {
+ err = -ENOMEM;
+ goto idata_err;
+ }
+
+ if (copy_from_user(idata->buf, (void __user *)(unsigned long)
+ idata->ic.data_ptr, idata->buf_bytes)) {
+ err = -EFAULT;
+ goto copy_err;
+ }
+
+ return idata;
+
+ copy_err:
+ kfree(idata->buf);
+ idata_err:
+ kfree(idata);
+ out:
+ return ERR_PTR(err);
+ }
+
+ static int mmc_blk_ioctl_copy_to_user(struct mmc_ioc_cmd __user *ic_ptr,
+ struct mmc_blk_ioc_data *idata)
+ {
+ struct mmc_ioc_cmd *ic = &idata->ic;
+
+ if (copy_to_user(&(ic_ptr->response), ic->response,
+ sizeof(ic->response)))
+ return -EFAULT;
+
+ if (!idata->ic.write_flag) {
+ if (copy_to_user((void __user *)(unsigned long)ic->data_ptr,
+ idata->buf, idata->buf_bytes))
+ return -EFAULT;
+ }
+
+ return 0;
+ }
+
+ static int ioctl_rpmb_card_status_poll(struct mmc_card *card, u32 *status,
+ u32 retries_max)
+ {
+ int err;
+ u32 retry_count = 0;
+
+ if (!status || !retries_max)
+ return -EINVAL;
+
+ do {
+ err = get_card_status(card, status, 5);
+ if (err)
+ break;
+
+ if (!R1_STATUS(*status) &&
+ (R1_CURRENT_STATE(*status) != R1_STATE_PRG))
+ break; /* RPMB programming operation complete */
+
+ /*
+ * Rechedule to give the MMC device a chance to continue
+ * processing the previous command without being polled too
+ * frequently.
+ */
+ usleep_range(1000, 5000);
+ } while (++retry_count < retries_max);
+
+ if (retry_count == retries_max)
+ err = -EPERM;
+
+ return err;
+ }
+
+ static int ioctl_do_sanitize(struct mmc_card *card)
+ {
+ int err;
+
+ if (!mmc_can_sanitize(card)) {
+ pr_warn("%s: %s - SANITIZE is not supported\n",
+ mmc_hostname(card->host), __func__);
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ pr_debug("%s: %s - SANITIZE IN PROGRESS...\n",
+ mmc_hostname(card->host), __func__);
+
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_SANITIZE_START, 1,
+ MMC_SANITIZE_REQ_TIMEOUT);
+
+ if (err)
+ pr_err("%s: %s - EXT_CSD_SANITIZE_START failed. err=%d\n",
+ mmc_hostname(card->host), __func__, err);
+
+ pr_debug("%s: %s - SANITIZE COMPLETED\n", mmc_hostname(card->host),
+ __func__);
+ out:
+ return err;
+ }
+
+ static int __mmc_blk_ioctl_cmd(struct mmc_card *card, struct mmc_blk_data *md,
+ struct mmc_blk_ioc_data *idata)
+ {
+ struct mmc_command cmd = {0};
+ struct mmc_data data = {0};
+ struct mmc_request mrq = {NULL};
+ struct scatterlist sg;
+ int err;
+ int is_rpmb = false;
+ u32 status = 0;
+
+ if (!card || !md || !idata)
+ return -EINVAL;
+
+ if (md->area_type & MMC_BLK_DATA_AREA_RPMB)
+ is_rpmb = true;
+
+ cmd.opcode = idata->ic.opcode;
+ cmd.arg = idata->ic.arg;
+ cmd.flags = idata->ic.flags;
+
+ if (idata->buf_bytes) {
+ data.sg = &sg;
+ data.sg_len = 1;
+ data.blksz = idata->ic.blksz;
+ data.blocks = idata->ic.blocks;
+
+ sg_init_one(data.sg, idata->buf, idata->buf_bytes);
+
+ if (idata->ic.write_flag)
+ data.flags = MMC_DATA_WRITE;
+ else
+ data.flags = MMC_DATA_READ;
+
+ /* data.flags must already be set before doing this. */
+ mmc_set_data_timeout(&data, card);
+
+ /* Allow overriding the timeout_ns for empirical tuning. */
+ if (idata->ic.data_timeout_ns)
+ data.timeout_ns = idata->ic.data_timeout_ns;
+
+ if ((cmd.flags & MMC_RSP_R1B) == MMC_RSP_R1B) {
+ /*
+ * Pretend this is a data transfer and rely on the
+ * host driver to compute timeout. When all host
+ * drivers support cmd.cmd_timeout for R1B, this
+ * can be changed to:
+ *
+ * mrq.data = NULL;
+ * cmd.cmd_timeout = idata->ic.cmd_timeout_ms;
+ */
+ data.timeout_ns = idata->ic.cmd_timeout_ms * 1000000;
+ }
+
+ mrq.data = &data;
+ }
+
+ mrq.cmd = &cmd;
+
+ err = mmc_blk_part_switch(card, md);
+ if (err)
+ return err;
+
+ if (idata->ic.is_acmd) {
+ err = mmc_app_cmd(card->host, card);
+ if (err)
+ return err;
+ }
+
+ if (is_rpmb) {
+ err = mmc_set_blockcount(card, data.blocks,
+ idata->ic.write_flag & (1 << 31));
+ if (err)
+ return err;
+ }
+
+ if ((MMC_EXTRACT_INDEX_FROM_ARG(cmd.arg) == EXT_CSD_SANITIZE_START) &&
+ (cmd.opcode == MMC_SWITCH)) {
+ err = ioctl_do_sanitize(card);
+
+ if (err)
+ pr_err("%s: ioctl_do_sanitize() failed. err = %d",
+ __func__, err);
+
+ return err;
+ }
+
+ mmc_wait_for_req(card->host, &mrq);
+
+ if (cmd.error) {
+ dev_err(mmc_dev(card->host), "%s: cmd error %d\n",
+ __func__, cmd.error);
+ return cmd.error;
+ }
+ if (data.error) {
+ dev_err(mmc_dev(card->host), "%s: data error %d\n",
+ __func__, data.error);
+ return data.error;
+ }
+
+ /*
+ * According to the SD specs, some commands require a delay after
+ * issuing the command.
+ */
+ if (idata->ic.postsleep_min_us)
+ usleep_range(idata->ic.postsleep_min_us, idata->ic.postsleep_max_us);
+
+ memcpy(&(idata->ic.response), cmd.resp, sizeof(cmd.resp));
+
+ if (is_rpmb) {
+ /*
+ * Ensure RPMB command has completed by polling CMD13
+ * "Send Status".
+ */
+ err = ioctl_rpmb_card_status_poll(card, &status, 5);
+ if (err)
+ dev_err(mmc_dev(card->host),
+ "%s: Card Status=0x%08X, error %d\n",
+ __func__, status, err);
+ }
+
+ return err;
+ }
+
+ static int mmc_blk_ioctl_cmd(struct block_device *bdev,
+ struct mmc_ioc_cmd __user *ic_ptr)
+ {
+ struct mmc_blk_ioc_data *idata;
+ struct mmc_blk_data *md;
+ struct mmc_card *card;
+ int err = 0, ioc_err = 0;
+
+ /*
+ * The caller must have CAP_SYS_RAWIO, and must be calling this on the
+ * whole block device, not on a partition. This prevents overspray
+ * between sibling partitions.
+ */
+ if ((!capable(CAP_SYS_RAWIO)) || (bdev != bdev->bd_contains))
+ return -EPERM;
+
+ idata = mmc_blk_ioctl_copy_from_user(ic_ptr);
+ if (IS_ERR(idata))
+ return PTR_ERR(idata);
+
+ md = mmc_blk_get(bdev->bd_disk);
+ if (!md) {
+ err = -EINVAL;
+ goto cmd_err;
+ }
+
+ card = md->queue.card;
+ if (IS_ERR(card)) {
+ err = PTR_ERR(card);
+ goto cmd_done;
+ }
+
+ mmc_get_card(card);
+
+ ioc_err = __mmc_blk_ioctl_cmd(card, md, idata);
+
+ /* Always switch back to main area after RPMB access */
+ if (md->area_type & MMC_BLK_DATA_AREA_RPMB)
+ mmc_blk_part_switch(card, dev_get_drvdata(&card->dev));
+
+ mmc_put_card(card);
+
+ err = mmc_blk_ioctl_copy_to_user(ic_ptr, idata);
+
+ cmd_done:
+ mmc_blk_put(md);
+ cmd_err:
+ kfree(idata->buf);
+ kfree(idata);
+ return ioc_err ? ioc_err : err;
+ }
+
+ static int mmc_blk_ioctl_multi_cmd(struct block_device *bdev,
+ struct mmc_ioc_multi_cmd __user *user)
+ {
+ struct mmc_blk_ioc_data **idata = NULL;
+ struct mmc_ioc_cmd __user *cmds = user->cmds;
+ struct mmc_card *card;
+ struct mmc_blk_data *md;
+ int i, err = 0, ioc_err = 0;
+ __u64 num_of_cmds;
+
+ /*
+ * The caller must have CAP_SYS_RAWIO, and must be calling this on the
+ * whole block device, not on a partition. This prevents overspray
+ * between sibling partitions.
+ */
+ if ((!capable(CAP_SYS_RAWIO)) || (bdev != bdev->bd_contains))
+ return -EPERM;
+
+ if (copy_from_user(&num_of_cmds, &user->num_of_cmds,
+ sizeof(num_of_cmds)))
+ return -EFAULT;
+
+ if (num_of_cmds > MMC_IOC_MAX_CMDS)
+ return -EINVAL;
+
+ idata = kcalloc(num_of_cmds, sizeof(*idata), GFP_KERNEL);
+ if (!idata)
+ return -ENOMEM;
+
+ for (i = 0; i < num_of_cmds; i++) {
+ idata[i] = mmc_blk_ioctl_copy_from_user(&cmds[i]);
+ if (IS_ERR(idata[i])) {
+ err = PTR_ERR(idata[i]);
+ num_of_cmds = i;
+ goto cmd_err;
+ }
+ }
+
+ md = mmc_blk_get(bdev->bd_disk);
+ if (!md) {
+ err = -EINVAL;
+ goto cmd_err;
+ }
+
+ card = md->queue.card;
+ if (IS_ERR(card)) {
+ err = PTR_ERR(card);
+ goto cmd_done;
+ }
+
+ mmc_get_card(card);
+
+ for (i = 0; i < num_of_cmds && !ioc_err; i++)
+ ioc_err = __mmc_blk_ioctl_cmd(card, md, idata[i]);
+
+ /* Always switch back to main area after RPMB access */
+ if (md->area_type & MMC_BLK_DATA_AREA_RPMB)
+ mmc_blk_part_switch(card, dev_get_drvdata(&card->dev));
+
+ mmc_put_card(card);
+
+ /* copy to user if data and response */
+ for (i = 0; i < num_of_cmds && !err; i++)
+ err = mmc_blk_ioctl_copy_to_user(&cmds[i], idata[i]);
+
+ cmd_done:
+ mmc_blk_put(md);
+ cmd_err:
+ for (i = 0; i < num_of_cmds; i++) {
+ kfree(idata[i]->buf);
+ kfree(idata[i]);
+ }
+ kfree(idata);
+ return ioc_err ? ioc_err : err;
+ }
+
+ static int mmc_blk_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg)
+ {
+ switch (cmd) {
+ case MMC_IOC_CMD:
+ return mmc_blk_ioctl_cmd(bdev,
+ (struct mmc_ioc_cmd __user *)arg);
+ case MMC_IOC_MULTI_CMD:
+ return mmc_blk_ioctl_multi_cmd(bdev,
+ (struct mmc_ioc_multi_cmd __user *)arg);
+ default:
+ return -EINVAL;
+ }
+ }
+
+ #ifdef CONFIG_COMPAT
+ static int mmc_blk_compat_ioctl(struct block_device *bdev, fmode_t mode,
+ unsigned int cmd, unsigned long arg)
+ {
+ return mmc_blk_ioctl(bdev, mode, cmd, (unsigned long) compat_ptr(arg));
+ }
+ #endif
+
+ static const struct block_device_operations mmc_bdops = {
+ .open = mmc_blk_open,
+ .release = mmc_blk_release,
+ .getgeo = mmc_blk_getgeo,
+ .owner = THIS_MODULE,
+ .ioctl = mmc_blk_ioctl,
+ #ifdef CONFIG_COMPAT
+ .compat_ioctl = mmc_blk_compat_ioctl,
+ #endif
+ };
+
+ static inline int mmc_blk_part_switch(struct mmc_card *card,
+ struct mmc_blk_data *md)
+ {
+ int ret;
+ struct mmc_blk_data *main_md = dev_get_drvdata(&card->dev);
+
+ if (main_md->part_curr == md->part_type)
+ return 0;
+
+ if (mmc_card_mmc(card)) {
+ u8 part_config = card->ext_csd.part_config;
+
+ if (md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB)
+ mmc_retune_pause(card->host);
+
+ part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK;
+ part_config |= md->part_type;
+
+ ret = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_PART_CONFIG, part_config,
+ card->ext_csd.part_time);
+ if (ret) {
+ if (md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB)
+ mmc_retune_unpause(card->host);
+ return ret;
+ }
+
+ card->ext_csd.part_config = part_config;
+
+ if (main_md->part_curr == EXT_CSD_PART_CONFIG_ACC_RPMB)
+ mmc_retune_unpause(card->host);
+ }
+
+ main_md->part_curr = md->part_type;
+ return 0;
+ }
+
+ static u32 mmc_sd_num_wr_blocks(struct mmc_card *card)
+ {
+ int err;
+ u32 result;
+ __be32 *blocks;
+
+ struct mmc_request mrq = {NULL};
+ struct mmc_command cmd = {0};
+ struct mmc_data data = {0};
+
+ struct scatterlist sg;
+
+ cmd.opcode = MMC_APP_CMD;
+ cmd.arg = card->rca << 16;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+
+ err = mmc_wait_for_cmd(card->host, &cmd, 0);
+ if (err)
+ return (u32)-1;
+ if (!mmc_host_is_spi(card->host) && !(cmd.resp[0] & R1_APP_CMD))
+ return (u32)-1;
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = SD_APP_SEND_NUM_WR_BLKS;
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ data.blksz = 4;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+ data.sg = &sg;
+ data.sg_len = 1;
+ mmc_set_data_timeout(&data, card);
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ blocks = kmalloc(4, GFP_KERNEL);
+ if (!blocks)
+ return (u32)-1;
+
+ sg_init_one(&sg, blocks, 4);
+
+ mmc_wait_for_req(card->host, &mrq);
+
+ result = ntohl(*blocks);
+ kfree(blocks);
+
+ if (cmd.error || data.error)
+ result = (u32)-1;
+
+ return result;
+ }
+
+ static int get_card_status(struct mmc_card *card, u32 *status, int retries)
+ {
+ struct mmc_command cmd = {0};
+ int err;
+
+ cmd.opcode = MMC_SEND_STATUS;
+ if (!mmc_host_is_spi(card->host))
+ cmd.arg = card->rca << 16;
+ cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
+ err = mmc_wait_for_cmd(card->host, &cmd, retries);
+ if (err == 0)
+ *status = cmd.resp[0];
+ return err;
+ }
+
+ static int card_busy_detect(struct mmc_card *card, unsigned int timeout_ms,
+ bool hw_busy_detect, struct request *req, bool *gen_err)
+ {
+ unsigned long timeout = jiffies + msecs_to_jiffies(timeout_ms);
+ int err = 0;
+ u32 status;
+
+ do {
+ err = get_card_status(card, &status, 5);
+ if (err) {
+ pr_err("%s: error %d requesting status\n",
+ req->rq_disk->disk_name, err);
+ return err;
+ }
+
+ if (status & R1_ERROR) {
+ pr_err("%s: %s: error sending status cmd, status %#x\n",
+ req->rq_disk->disk_name, __func__, status);
+ *gen_err = true;
+ }
+
+ /* We may rely on the host hw to handle busy detection.*/
+ if ((card->host->caps & MMC_CAP_WAIT_WHILE_BUSY) &&
+ hw_busy_detect)
+ break;
+
+ /*
+ * Timeout if the device never becomes ready for data and never
+ * leaves the program state.
+ */
+ if (time_after(jiffies, timeout)) {
+ pr_err("%s: Card stuck in programming state! %s %s\n",
+ mmc_hostname(card->host),
+ req->rq_disk->disk_name, __func__);
+ return -ETIMEDOUT;
+ }
+
+ /*
+ * Some cards mishandle the status bits,
+ * so make sure to check both the busy
+ * indication and the card state.
+ */
+ } while (!(status & R1_READY_FOR_DATA) ||
+ (R1_CURRENT_STATE(status) == R1_STATE_PRG));
+
+ return err;
+ }
+
+ static int send_stop(struct mmc_card *card, unsigned int timeout_ms,
+ struct request *req, bool *gen_err, u32 *stop_status)
+ {
+ struct mmc_host *host = card->host;
+ struct mmc_command cmd = {0};
+ int err;
+ bool use_r1b_resp = rq_data_dir(req) == WRITE;
+
+ /*
+ * Normally we use R1B responses for WRITE, but in cases where the host
+ * has specified a max_busy_timeout we need to validate it. A failure
+ * means we need to prevent the host from doing hw busy detection, which
+ * is done by converting to a R1 response instead.
+ */
+ if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout))
+ use_r1b_resp = false;
+
+ cmd.opcode = MMC_STOP_TRANSMISSION;
+ if (use_r1b_resp) {
+ cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
+ cmd.busy_timeout = timeout_ms;
+ } else {
+ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
+ }
+
+ err = mmc_wait_for_cmd(host, &cmd, 5);
+ if (err)
+ return err;
+
+ *stop_status = cmd.resp[0];
+
+ /* No need to check card status in case of READ. */
+ if (rq_data_dir(req) == READ)
+ return 0;
+
+ if (!mmc_host_is_spi(host) &&
+ (*stop_status & R1_ERROR)) {
+ pr_err("%s: %s: general error sending stop command, resp %#x\n",
+ req->rq_disk->disk_name, __func__, *stop_status);
+ *gen_err = true;
+ }
+
+ return card_busy_detect(card, timeout_ms, use_r1b_resp, req, gen_err);
+ }
+
+ #define ERR_NOMEDIUM 3
+ #define ERR_RETRY 2
+ #define ERR_ABORT 1
+ #define ERR_CONTINUE 0
+
+ static int mmc_blk_cmd_error(struct request *req, const char *name, int error,
+ bool status_valid, u32 status)
+ {
+ switch (error) {
+ case -EILSEQ:
+ /* response crc error, retry the r/w cmd */
+ pr_err("%s: %s sending %s command, card status %#x\n",
+ req->rq_disk->disk_name, "response CRC error",
+ name, status);
+ return ERR_RETRY;
+
+ case -ETIMEDOUT:
+ pr_err("%s: %s sending %s command, card status %#x\n",
+ req->rq_disk->disk_name, "timed out", name, status);
+
+ /* If the status cmd initially failed, retry the r/w cmd */
+ if (!status_valid) {
+ pr_err("%s: status not valid, retrying timeout\n",
+ req->rq_disk->disk_name);
+ return ERR_RETRY;
+ }
+
+ /*
+ * If it was a r/w cmd crc error, or illegal command
+ * (eg, issued in wrong state) then retry - we should
+ * have corrected the state problem above.
+ */
+ if (status & (R1_COM_CRC_ERROR | R1_ILLEGAL_COMMAND)) {
+ pr_err("%s: command error, retrying timeout\n",
+ req->rq_disk->disk_name);
+ return ERR_RETRY;
+ }
+
+ /* Otherwise abort the command */
+ return ERR_ABORT;
+
+ default:
+ /* We don't understand the error code the driver gave us */
+ pr_err("%s: unknown error %d sending read/write command, card status %#x\n",
+ req->rq_disk->disk_name, error, status);
+ return ERR_ABORT;
+ }
+ }
+
+ /*
+ * Initial r/w and stop cmd error recovery.
+ * We don't know whether the card received the r/w cmd or not, so try to
+ * restore things back to a sane state. Essentially, we do this as follows:
+ * - Obtain card status. If the first attempt to obtain card status fails,
+ * the status word will reflect the failed status cmd, not the failed
+ * r/w cmd. If we fail to obtain card status, it suggests we can no
+ * longer communicate with the card.
+ * - Check the card state. If the card received the cmd but there was a
+ * transient problem with the response, it might still be in a data transfer
+ * mode. Try to send it a stop command. If this fails, we can't recover.
+ * - If the r/w cmd failed due to a response CRC error, it was probably
+ * transient, so retry the cmd.
+ * - If the r/w cmd timed out, but we didn't get the r/w cmd status, retry.
+ * - If the r/w cmd timed out, and the r/w cmd failed due to CRC error or
+ * illegal cmd, retry.
+ * Otherwise we don't understand what happened, so abort.
+ */
+ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req,
+ struct mmc_blk_request *brq, bool *ecc_err, bool *gen_err)
+ {
+ bool prev_cmd_status_valid = true;
+ u32 status, stop_status = 0;
+ int err, retry;
+
+ if (mmc_card_removed(card))
+ return ERR_NOMEDIUM;
+
+ /*
+ * Try to get card status which indicates both the card state
+ * and why there was no response. If the first attempt fails,
+ * we can't be sure the returned status is for the r/w command.
+ */
+ for (retry = 2; retry >= 0; retry--) {
+ err = get_card_status(card, &status, 0);
+ if (!err)
+ break;
+
+ /* Re-tune if needed */
+ mmc_retune_recheck(card->host);
+
+ prev_cmd_status_valid = false;
+ pr_err("%s: error %d sending status command, %sing\n",
+ req->rq_disk->disk_name, err, retry ? "retry" : "abort");
+ }
+
+ /* We couldn't get a response from the card. Give up. */
+ if (err) {
+ /* Check if the card is removed */
+ if (mmc_detect_card_removed(card->host))
+ return ERR_NOMEDIUM;
+ return ERR_ABORT;
+ }
+
+ /* Flag ECC errors */
+ if ((status & R1_CARD_ECC_FAILED) ||
+ (brq->stop.resp[0] & R1_CARD_ECC_FAILED) ||
+ (brq->cmd.resp[0] & R1_CARD_ECC_FAILED))
+ *ecc_err = true;
+
+ /* Flag General errors */
+ if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ)
+ if ((status & R1_ERROR) ||
+ (brq->stop.resp[0] & R1_ERROR)) {
+ pr_err("%s: %s: general error sending stop or status command, stop cmd response %#x, card status %#x\n",
+ req->rq_disk->disk_name, __func__,
+ brq->stop.resp[0], status);
+ *gen_err = true;
+ }
+
+ /*
+ * Check the current card state. If it is in some data transfer
+ * mode, tell it to stop (and hopefully transition back to TRAN.)
+ */
+ if (R1_CURRENT_STATE(status) == R1_STATE_DATA ||
+ R1_CURRENT_STATE(status) == R1_STATE_RCV) {
+ err = send_stop(card,
+ DIV_ROUND_UP(brq->data.timeout_ns, 1000000),
+ req, gen_err, &stop_status);
+ if (err) {
+ pr_err("%s: error %d sending stop command\n",
+ req->rq_disk->disk_name, err);
+ /*
+ * If the stop cmd also timed out, the card is probably
+ * not present, so abort. Other errors are bad news too.
+ */
+ return ERR_ABORT;
+ }
+
+ if (stop_status & R1_CARD_ECC_FAILED)
+ *ecc_err = true;
+ }
+
+ /* Check for set block count errors */
+ if (brq->sbc.error)
+ return mmc_blk_cmd_error(req, "SET_BLOCK_COUNT", brq->sbc.error,
+ prev_cmd_status_valid, status);
+
+ /* Check for r/w command errors */
+ if (brq->cmd.error)
+ return mmc_blk_cmd_error(req, "r/w cmd", brq->cmd.error,
+ prev_cmd_status_valid, status);
+
+ /* Data errors */
+ if (!brq->stop.error)
+ return ERR_CONTINUE;
+
+ /* Now for stop errors. These aren't fatal to the transfer. */
+ pr_info("%s: error %d sending stop command, original cmd response %#x, card status %#x\n",
+ req->rq_disk->disk_name, brq->stop.error,
+ brq->cmd.resp[0], status);
+
+ /*
+ * Subsitute in our own stop status as this will give the error
+ * state which happened during the execution of the r/w command.
+ */
+ if (stop_status) {
+ brq->stop.resp[0] = stop_status;
+ brq->stop.error = 0;
+ }
+ return ERR_CONTINUE;
+ }
+
+ static int mmc_blk_reset(struct mmc_blk_data *md, struct mmc_host *host,
+ int type)
+ {
+ int err;
+
+ if (md->reset_done & type)
+ return -EEXIST;
+
+ md->reset_done |= type;
+ err = mmc_hw_reset(host);
+ /* Ensure we switch back to the correct partition */
+ if (err != -EOPNOTSUPP) {
+ struct mmc_blk_data *main_md =
+ dev_get_drvdata(&host->card->dev);
+ int part_err;
+
+ main_md->part_curr = main_md->part_type;
+ part_err = mmc_blk_part_switch(host->card, md);
+ if (part_err) {
+ /*
+ * We have failed to get back into the correct
+ * partition, so we need to abort the whole request.
+ */
+ return -ENODEV;
+ }
+ }
+ return err;
+ }
+
+ static inline void mmc_blk_reset_success(struct mmc_blk_data *md, int type)
+ {
+ md->reset_done &= ~type;
+ }
+
+ int mmc_access_rpmb(struct mmc_queue *mq)
+ {
+ struct mmc_blk_data *md = mq->blkdata;
+ /*
+ * If this is a RPMB partition access, return ture
+ */
+ if (md && md->part_type == EXT_CSD_PART_CONFIG_ACC_RPMB)
+ return true;
+
+ return false;
+ }
+
+ static int mmc_blk_issue_discard_rq(struct mmc_queue *mq, struct request *req)
+ {
+ struct mmc_blk_data *md = mq->blkdata;
+ struct mmc_card *card = md->queue.card;
+ unsigned int from, nr, arg;
+ int err = 0, type = MMC_BLK_DISCARD;
+
+ if (!mmc_can_erase(card)) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ from = blk_rq_pos(req);
+ nr = blk_rq_sectors(req);
+
+ if (mmc_can_discard(card))
+ arg = MMC_DISCARD_ARG;
+ else if (mmc_can_trim(card))
+ arg = MMC_TRIM_ARG;
+ else
+ arg = MMC_ERASE_ARG;
+ retry:
+ if (card->quirks & MMC_QUIRK_INAND_CMD38) {
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ INAND_CMD38_ARG_EXT_CSD,
+ arg == MMC_TRIM_ARG ?
+ INAND_CMD38_ARG_TRIM :
+ INAND_CMD38_ARG_ERASE,
+ 0);
+ if (err)
+ goto out;
+ }
+ err = mmc_erase(card, from, nr, arg);
+ out:
+ if (err == -EIO && !mmc_blk_reset(md, card->host, type))
+ goto retry;
+ if (!err)
+ mmc_blk_reset_success(md, type);
+ blk_end_request(req, err, blk_rq_bytes(req));
+
+ return err ? 0 : 1;
+ }
+
+ static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq,
+ struct request *req)
+ {
+ struct mmc_blk_data *md = mq->blkdata;
+ struct mmc_card *card = md->queue.card;
+ unsigned int from, nr, arg;
+ int err = 0, type = MMC_BLK_SECDISCARD;
+
+ if (!(mmc_can_secure_erase_trim(card))) {
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ from = blk_rq_pos(req);
+ nr = blk_rq_sectors(req);
+
+ if (mmc_can_trim(card) && !mmc_erase_group_aligned(card, from, nr))
+ arg = MMC_SECURE_TRIM1_ARG;
+ else
+ arg = MMC_SECURE_ERASE_ARG;
+
+ retry:
+ if (card->quirks & MMC_QUIRK_INAND_CMD38) {
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ INAND_CMD38_ARG_EXT_CSD,
+ arg == MMC_SECURE_TRIM1_ARG ?
+ INAND_CMD38_ARG_SECTRIM1 :
+ INAND_CMD38_ARG_SECERASE,
+ 0);
+ if (err)
+ goto out_retry;
+ }
+
+ err = mmc_erase(card, from, nr, arg);
+ if (err == -EIO)
+ goto out_retry;
+ if (err)
+ goto out;
+
+ if (arg == MMC_SECURE_TRIM1_ARG) {
+ if (card->quirks & MMC_QUIRK_INAND_CMD38) {
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ INAND_CMD38_ARG_EXT_CSD,
+ INAND_CMD38_ARG_SECTRIM2,
+ 0);
+ if (err)
+ goto out_retry;
+ }
+
+ err = mmc_erase(card, from, nr, MMC_SECURE_TRIM2_ARG);
+ if (err == -EIO)
+ goto out_retry;
+ if (err)
+ goto out;
+ }
+
+ out_retry:
+ if (err && !mmc_blk_reset(md, card->host, type))
+ goto retry;
+ if (!err)
+ mmc_blk_reset_success(md, type);
+ out:
+ blk_end_request(req, err, blk_rq_bytes(req));
+
+ return err ? 0 : 1;
+ }
+
+ static int mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req)
+ {
+ struct mmc_blk_data *md = mq->blkdata;
+ struct mmc_card *card = md->queue.card;
+ int ret = 0;
+
+ ret = mmc_flush_cache(card);
+ if (ret)
+ ret = -EIO;
+
+ blk_end_request_all(req, ret);
+
+ return ret ? 0 : 1;
+ }
+
+ /*
+ * Reformat current write as a reliable write, supporting
+ * both legacy and the enhanced reliable write MMC cards.
+ * In each transfer we'll handle only as much as a single
+ * reliable write can handle, thus finish the request in
+ * partial completions.
+ */
+ static inline void mmc_apply_rel_rw(struct mmc_blk_request *brq,
+ struct mmc_card *card,
+ struct request *req)
+ {
+ if (!(card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN)) {
+ /* Legacy mode imposes restrictions on transfers. */
+ if (!IS_ALIGNED(brq->cmd.arg, card->ext_csd.rel_sectors))
+ brq->data.blocks = 1;
+
+ if (brq->data.blocks > card->ext_csd.rel_sectors)
+ brq->data.blocks = card->ext_csd.rel_sectors;
+ else if (brq->data.blocks < card->ext_csd.rel_sectors)
+ brq->data.blocks = 1;
+ }
+ }
+
+ #define CMD_ERRORS \
+ (R1_OUT_OF_RANGE | /* Command argument out of range */ \
+ R1_ADDRESS_ERROR | /* Misaligned address */ \
+ R1_BLOCK_LEN_ERROR | /* Transferred block length incorrect */\
+ R1_WP_VIOLATION | /* Tried to write to protected block */ \
+ R1_CC_ERROR | /* Card controller error */ \
+ R1_ERROR) /* General/unknown error */
+
+ static enum mmc_blk_status mmc_blk_err_check(struct mmc_card *card,
+ struct mmc_async_req *areq)
+ {
+ struct mmc_queue_req *mq_mrq = container_of(areq, struct mmc_queue_req,
+ mmc_active);
+ struct mmc_blk_request *brq = &mq_mrq->brq;
+ struct request *req = mq_mrq->req;
+ int need_retune = card->host->need_retune;
+ bool ecc_err = false;
+ bool gen_err = false;
+
+ /*
+ * sbc.error indicates a problem with the set block count
+ * command. No data will have been transferred.
+ *
+ * cmd.error indicates a problem with the r/w command. No
+ * data will have been transferred.
+ *
+ * stop.error indicates a problem with the stop command. Data
+ * may have been transferred, or may still be transferring.
+ */
+ if (brq->sbc.error || brq->cmd.error || brq->stop.error ||
+ brq->data.error) {
+ switch (mmc_blk_cmd_recovery(card, req, brq, &ecc_err, &gen_err)) {
+ case ERR_RETRY:
+ return MMC_BLK_RETRY;
+ case ERR_ABORT:
+ return MMC_BLK_ABORT;
+ case ERR_NOMEDIUM:
+ return MMC_BLK_NOMEDIUM;
+ case ERR_CONTINUE:
+ break;
+ }
+ }
+
+ /*
+ * Check for errors relating to the execution of the
+ * initial command - such as address errors. No data
+ * has been transferred.
+ */
+ if (brq->cmd.resp[0] & CMD_ERRORS) {
+ pr_err("%s: r/w command failed, status = %#x\n",
+ req->rq_disk->disk_name, brq->cmd.resp[0]);
+ return MMC_BLK_ABORT;
+ }
+
+ /*
+ * Everything else is either success, or a data error of some
+ * kind. If it was a write, we may have transitioned to
+ * program mode, which we have to wait for it to complete.
+ */
+ if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) {
+ int err;
+
+ /* Check stop command response */
+ if (brq->stop.resp[0] & R1_ERROR) {
+ pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n",
+ req->rq_disk->disk_name, __func__,
+ brq->stop.resp[0]);
+ gen_err = true;
+ }
+
+ err = card_busy_detect(card, MMC_BLK_TIMEOUT_MS, false, req,
+ &gen_err);
+ if (err)
+ return MMC_BLK_CMD_ERR;
+ }
+
+ /* if general error occurs, retry the write operation. */
+ if (gen_err) {
+ pr_warn("%s: retrying write for general error\n",
+ req->rq_disk->disk_name);
+ return MMC_BLK_RETRY;
+ }
+
+ if (brq->data.error) {
+ if (need_retune && !brq->retune_retry_done) {
+ pr_debug("%s: retrying because a re-tune was needed\n",
+ req->rq_disk->disk_name);
+ brq->retune_retry_done = 1;
+ return MMC_BLK_RETRY;
+ }
+ pr_err("%s: error %d transferring data, sector %u, nr %u, cmd response %#x, card status %#x\n",
+ req->rq_disk->disk_name, brq->data.error,
+ (unsigned)blk_rq_pos(req),
+ (unsigned)blk_rq_sectors(req),
+ brq->cmd.resp[0], brq->stop.resp[0]);
+
+ if (rq_data_dir(req) == READ) {
+ if (ecc_err)
+ return MMC_BLK_ECC_ERR;
+ return MMC_BLK_DATA_ERR;
+ } else {
+ return MMC_BLK_CMD_ERR;
+ }
+ }
+
+ if (!brq->data.bytes_xfered)
+ return MMC_BLK_RETRY;
+
+ if (blk_rq_bytes(req) != brq->data.bytes_xfered)
+ return MMC_BLK_PARTIAL;
+
+ return MMC_BLK_SUCCESS;
+ }
+
+ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq,
+ struct mmc_card *card,
+ int disable_multi,
+ struct mmc_queue *mq)
+ {
+ u32 readcmd, writecmd;
+ struct mmc_blk_request *brq = &mqrq->brq;
+ struct request *req = mqrq->req;
+ struct mmc_blk_data *md = mq->blkdata;
+ bool do_data_tag;
+
+ /*
+ * Reliable writes are used to implement Forced Unit Access and
+ * are supported only on MMCs.
+ */
+ bool do_rel_wr = (req->cmd_flags & REQ_FUA) &&
+ (rq_data_dir(req) == WRITE) &&
+ (md->flags & MMC_BLK_REL_WR);
+
+ memset(brq, 0, sizeof(struct mmc_blk_request));
+ brq->mrq.cmd = &brq->cmd;
+ brq->mrq.data = &brq->data;
+
+ brq->cmd.arg = blk_rq_pos(req);
+ if (!mmc_card_blockaddr(card))
+ brq->cmd.arg <<= 9;
+ brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
+ brq->data.blksz = 512;
+ brq->stop.opcode = MMC_STOP_TRANSMISSION;
+ brq->stop.arg = 0;
+ brq->data.blocks = blk_rq_sectors(req);
+
+ /*
+ * The block layer doesn't support all sector count
+ * restrictions, so we need to be prepared for too big
+ * requests.
+ */
+ if (brq->data.blocks > card->host->max_blk_count)
+ brq->data.blocks = card->host->max_blk_count;
+
+ if (brq->data.blocks > 1) {
+ /*
+ * After a read error, we redo the request one sector
+ * at a time in order to accurately determine which
+ * sectors can be read successfully.
+ */
+ if (disable_multi)
+ brq->data.blocks = 1;
+
+ /*
+ * Some controllers have HW issues while operating
+ * in multiple I/O mode
+ */
+ if (card->host->ops->multi_io_quirk)
+ brq->data.blocks = card->host->ops->multi_io_quirk(card,
+ (rq_data_dir(req) == READ) ?
+ MMC_DATA_READ : MMC_DATA_WRITE,
+ brq->data.blocks);
+ }
+
+ if (brq->data.blocks > 1 || do_rel_wr) {
+ /* SPI multiblock writes terminate using a special
+ * token, not a STOP_TRANSMISSION request.
+ */
+ if (!mmc_host_is_spi(card->host) ||
+ rq_data_dir(req) == READ)
+ brq->mrq.stop = &brq->stop;
+ readcmd = MMC_READ_MULTIPLE_BLOCK;
+ writecmd = MMC_WRITE_MULTIPLE_BLOCK;
+ } else {
+ brq->mrq.stop = NULL;
+ readcmd = MMC_READ_SINGLE_BLOCK;
+ writecmd = MMC_WRITE_BLOCK;
+ }
+ if (rq_data_dir(req) == READ) {
+ brq->cmd.opcode = readcmd;
+ brq->data.flags = MMC_DATA_READ;
+ if (brq->mrq.stop)
+ brq->stop.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |
+ MMC_CMD_AC;
+ } else {
+ brq->cmd.opcode = writecmd;
+ brq->data.flags = MMC_DATA_WRITE;
+ if (brq->mrq.stop)
+ brq->stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |
+ MMC_CMD_AC;
+ }
+
+ if (do_rel_wr)
+ mmc_apply_rel_rw(brq, card, req);
+
+ /*
+ * Data tag is used only during writing meta data to speed
+ * up write and any subsequent read of this meta data
+ */
+ do_data_tag = (card->ext_csd.data_tag_unit_size) &&
+ (req->cmd_flags & REQ_META) &&
+ (rq_data_dir(req) == WRITE) &&
+ ((brq->data.blocks * brq->data.blksz) >=
+ card->ext_csd.data_tag_unit_size);
+
+ /*
+ * Pre-defined multi-block transfers are preferable to
+ * open ended-ones (and necessary for reliable writes).
+ * However, it is not sufficient to just send CMD23,
+ * and avoid the final CMD12, as on an error condition
+ * CMD12 (stop) needs to be sent anyway. This, coupled
+ * with Auto-CMD23 enhancements provided by some
+ * hosts, means that the complexity of dealing
+ * with this is best left to the host. If CMD23 is
+ * supported by card and host, we'll fill sbc in and let
+ * the host deal with handling it correctly. This means
+ * that for hosts that don't expose MMC_CAP_CMD23, no
+ * change of behavior will be observed.
+ *
+ * N.B: Some MMC cards experience perf degradation.
+ * We'll avoid using CMD23-bounded multiblock writes for
+ * these, while retaining features like reliable writes.
+ */
+ if ((md->flags & MMC_BLK_CMD23) && mmc_op_multi(brq->cmd.opcode) &&
+ (do_rel_wr || !(card->quirks & MMC_QUIRK_BLK_NO_CMD23) ||
+ do_data_tag)) {
+ brq->sbc.opcode = MMC_SET_BLOCK_COUNT;
+ brq->sbc.arg = brq->data.blocks |
+ (do_rel_wr ? (1 << 31) : 0) |
+ (do_data_tag ? (1 << 29) : 0);
+ brq->sbc.flags = MMC_RSP_R1 | MMC_CMD_AC;
+ brq->mrq.sbc = &brq->sbc;
+ }
+
+ mmc_set_data_timeout(&brq->data, card);
+
+ brq->data.sg = mqrq->sg;
+ brq->data.sg_len = mmc_queue_map_sg(mq, mqrq);
+
+ /*
+ * Adjust the sg list so it is the same size as the
+ * request.
+ */
+ if (brq->data.blocks != blk_rq_sectors(req)) {
+ int i, data_size = brq->data.blocks << 9;
+ struct scatterlist *sg;
+
+ for_each_sg(brq->data.sg, sg, brq->data.sg_len, i) {
+ data_size -= sg->length;
+ if (data_size <= 0) {
+ sg->length += data_size;
+ i++;
+ break;
+ }
+ }
+ brq->data.sg_len = i;
+ }
+
+ mqrq->mmc_active.mrq = &brq->mrq;
+ mqrq->mmc_active.err_check = mmc_blk_err_check;
+
+ mmc_queue_bounce_pre(mqrq);
+ }
+
+ static int mmc_blk_cmd_err(struct mmc_blk_data *md, struct mmc_card *card,
+ struct mmc_blk_request *brq, struct request *req,
+ int ret)
+ {
+ struct mmc_queue_req *mq_rq;
+ mq_rq = container_of(brq, struct mmc_queue_req, brq);
+
+ /*
+ * If this is an SD card and we're writing, we can first
+ * mark the known good sectors as ok.
+ *
+ * If the card is not SD, we can still ok written sectors
+ * as reported by the controller (which might be less than
+ * the real number of written sectors, but never more).
+ */
+ if (mmc_card_sd(card)) {
+ u32 blocks;
+
+ blocks = mmc_sd_num_wr_blocks(card);
+ if (blocks != (u32)-1) {
+ ret = blk_end_request(req, 0, blocks << 9);
+ }
+ } else {
+ ret = blk_end_request(req, 0, brq->data.bytes_xfered);
+ }
+ return ret;
+ }
+
+ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
+ {
+ struct mmc_blk_data *md = mq->blkdata;
+ struct mmc_card *card = md->queue.card;
+ struct mmc_blk_request *brq;
+ int ret = 1, disable_multi = 0, retry = 0, type, retune_retry_done = 0;
+ enum mmc_blk_status status;
+ struct mmc_queue_req *mq_rq;
+ struct request *req;
+ struct mmc_async_req *areq;
+
+ if (!rqc && !mq->mqrq_prev->req)
+ return 0;
+
+ do {
+ if (rqc) {
+ /*
+ * When 4KB native sector is enabled, only 8 blocks
+ * multiple read or write is allowed
+ */
+ if (mmc_large_sector(card) &&
+ !IS_ALIGNED(blk_rq_sectors(rqc), 8)) {
+ pr_err("%s: Transfer size is not 4KB sector size aligned\n",
+ rqc->rq_disk->disk_name);
+ mq_rq = mq->mqrq_cur;
+ req = rqc;
+ rqc = NULL;
+ goto cmd_abort;
+ }
+
+ mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq);
+ areq = &mq->mqrq_cur->mmc_active;
+ } else
+ areq = NULL;
+ areq = mmc_start_req(card->host, areq, &status);
+ if (!areq) {
+ if (status == MMC_BLK_NEW_REQUEST)
+ mq->flags |= MMC_QUEUE_NEW_REQUEST;
+ return 0;
+ }
+
+ mq_rq = container_of(areq, struct mmc_queue_req, mmc_active);
+ brq = &mq_rq->brq;
+ req = mq_rq->req;
+ type = rq_data_dir(req) == READ ? MMC_BLK_READ : MMC_BLK_WRITE;
+ mmc_queue_bounce_post(mq_rq);
+
+ switch (status) {
+ case MMC_BLK_SUCCESS:
+ case MMC_BLK_PARTIAL:
+ /*
+ * A block was successfully transferred.
+ */
+ mmc_blk_reset_success(md, type);
+
+ ret = blk_end_request(req, 0,
+ brq->data.bytes_xfered);
+
+ /*
+ * If the blk_end_request function returns non-zero even
+ * though all data has been transferred and no errors
+ * were returned by the host controller, it's a bug.
+ */
+ if (status == MMC_BLK_SUCCESS && ret) {
+ pr_err("%s BUG rq_tot %d d_xfer %d\n",
+ __func__, blk_rq_bytes(req),
+ brq->data.bytes_xfered);
+ rqc = NULL;
+ goto cmd_abort;
+ }
+ break;
+ case MMC_BLK_CMD_ERR:
+ ret = mmc_blk_cmd_err(md, card, brq, req, ret);
+ if (mmc_blk_reset(md, card->host, type))
+ goto cmd_abort;
+ if (!ret)
+ goto start_new_req;
+ break;
+ case MMC_BLK_RETRY:
+ retune_retry_done = brq->retune_retry_done;
+ if (retry++ < 5)
+ break;
+ /* Fall through */
+ case MMC_BLK_ABORT:
+ if (!mmc_blk_reset(md, card->host, type))
+ break;
+ goto cmd_abort;
+ case MMC_BLK_DATA_ERR: {
+ int err;
+
+ err = mmc_blk_reset(md, card->host, type);
+ if (!err)
+ break;
+ if (err == -ENODEV)
+ goto cmd_abort;
+ /* Fall through */
+ }
+ case MMC_BLK_ECC_ERR:
+ if (brq->data.blocks > 1) {
+ /* Redo read one sector at a time */
+ pr_warn("%s: retrying using single block read\n",
+ req->rq_disk->disk_name);
+ disable_multi = 1;
+ break;
+ }
+ /*
+ * After an error, we redo I/O one sector at a
+ * time, so we only reach here after trying to
+ * read a single sector.
+ */
+ ret = blk_end_request(req, -EIO,
+ brq->data.blksz);
+ if (!ret)
+ goto start_new_req;
+ break;
+ case MMC_BLK_NOMEDIUM:
+ goto cmd_abort;
+ default:
+ pr_err("%s: Unhandled return value (%d)",
+ req->rq_disk->disk_name, status);
+ goto cmd_abort;
+ }
+
+ if (ret) {
+ /*
+ * In case of a incomplete request
+ * prepare it again and resend.
+ */
+ mmc_blk_rw_rq_prep(mq_rq, card,
+ disable_multi, mq);
+ mmc_start_req(card->host,
+ &mq_rq->mmc_active, NULL);
+ mq_rq->brq.retune_retry_done = retune_retry_done;
+ }
+ } while (ret);
+
+ return 1;
+
+ cmd_abort:
+ if (mmc_card_removed(card))
- rqc->cmd_flags |= REQ_QUIET;
++ req->rq_flags |= RQF_QUIET;
+ while (ret)
+ ret = blk_end_request(req, -EIO,
+ blk_rq_cur_bytes(req));
+
+ start_new_req:
+ if (rqc) {
+ if (mmc_card_removed(card)) {
++ rqc->rq_flags |= RQF_QUIET;
+ blk_end_request_all(rqc, -EIO);
+ } else {
+ mmc_blk_rw_rq_prep(mq->mqrq_cur, card, 0, mq);
+ mmc_start_req(card->host,
+ &mq->mqrq_cur->mmc_active, NULL);
+ }
+ }
+
+ return 0;
+ }
+
+ int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
+ {
+ int ret;
+ struct mmc_blk_data *md = mq->blkdata;
+ struct mmc_card *card = md->queue.card;
+ bool req_is_special = mmc_req_is_special(req);
+
+ if (req && !mq->mqrq_prev->req)
+ /* claim host only for the first request */
+ mmc_get_card(card);
+
+ ret = mmc_blk_part_switch(card, md);
+ if (ret) {
+ if (req) {
+ blk_end_request_all(req, -EIO);
+ }
+ ret = 0;
+ goto out;
+ }
+
+ mq->flags &= ~MMC_QUEUE_NEW_REQUEST;
+ if (req && req_op(req) == REQ_OP_DISCARD) {
+ /* complete ongoing async transfer before issuing discard */
+ if (card->host->areq)
+ mmc_blk_issue_rw_rq(mq, NULL);
+ ret = mmc_blk_issue_discard_rq(mq, req);
+ } else if (req && req_op(req) == REQ_OP_SECURE_ERASE) {
+ /* complete ongoing async transfer before issuing secure erase*/
+ if (card->host->areq)
+ mmc_blk_issue_rw_rq(mq, NULL);
+ ret = mmc_blk_issue_secdiscard_rq(mq, req);
+ } else if (req && req_op(req) == REQ_OP_FLUSH) {
+ /* complete ongoing async transfer before issuing flush */
+ if (card->host->areq)
+ mmc_blk_issue_rw_rq(mq, NULL);
+ ret = mmc_blk_issue_flush(mq, req);
+ } else {
+ ret = mmc_blk_issue_rw_rq(mq, req);
+ }
+
+ out:
+ if ((!req && !(mq->flags & MMC_QUEUE_NEW_REQUEST)) || req_is_special)
+ /*
+ * Release host when there are no more requests
+ * and after special request(discard, flush) is done.
+ * In case sepecial request, there is no reentry to
+ * the 'mmc_blk_issue_rq' with 'mqrq_prev->req'.
+ */
+ mmc_put_card(card);
+ return ret;
+ }
+
+ static inline int mmc_blk_readonly(struct mmc_card *card)
+ {
+ return mmc_card_readonly(card) ||
+ !(card->csd.cmdclass & CCC_BLOCK_WRITE);
+ }
+
+ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
+ struct device *parent,
+ sector_t size,
+ bool default_ro,
+ const char *subname,
+ int area_type)
+ {
+ struct mmc_blk_data *md;
+ int devidx, ret;
+
+ again:
+ if (!ida_pre_get(&mmc_blk_ida, GFP_KERNEL))
+ return ERR_PTR(-ENOMEM);
+
+ spin_lock(&mmc_blk_lock);
+ ret = ida_get_new(&mmc_blk_ida, &devidx);
+ spin_unlock(&mmc_blk_lock);
+
+ if (ret == -EAGAIN)
+ goto again;
+ else if (ret)
+ return ERR_PTR(ret);
+
+ if (devidx >= max_devices) {
+ ret = -ENOSPC;
+ goto out;
+ }
+
+ md = kzalloc(sizeof(struct mmc_blk_data), GFP_KERNEL);
+ if (!md) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ md->area_type = area_type;
+
+ /*
+ * Set the read-only status based on the supported commands
+ * and the write protect switch.
+ */
+ md->read_only = mmc_blk_readonly(card);
+
+ md->disk = alloc_disk(perdev_minors);
+ if (md->disk == NULL) {
+ ret = -ENOMEM;
+ goto err_kfree;
+ }
+
+ spin_lock_init(&md->lock);
+ INIT_LIST_HEAD(&md->part);
+ md->usage = 1;
+
+ ret = mmc_init_queue(&md->queue, card, &md->lock, subname);
+ if (ret)
+ goto err_putdisk;
+
+ md->queue.blkdata = md;
+
+ md->disk->major = MMC_BLOCK_MAJOR;
+ md->disk->first_minor = devidx * perdev_minors;
+ md->disk->fops = &mmc_bdops;
+ md->disk->private_data = md;
+ md->disk->queue = md->queue.queue;
+ md->parent = parent;
+ set_disk_ro(md->disk, md->read_only || default_ro);
+ md->disk->flags = GENHD_FL_EXT_DEVT;
+ if (area_type & (MMC_BLK_DATA_AREA_RPMB | MMC_BLK_DATA_AREA_BOOT))
+ md->disk->flags |= GENHD_FL_NO_PART_SCAN;
+
+ /*
+ * As discussed on lkml, GENHD_FL_REMOVABLE should:
+ *
+ * - be set for removable media with permanent block devices
+ * - be unset for removable block devices with permanent media
+ *
+ * Since MMC block devices clearly fall under the second
+ * case, we do not set GENHD_FL_REMOVABLE. Userspace
+ * should use the block device creation/destruction hotplug
+ * messages to tell when the card is present.
+ */
+
+ snprintf(md->disk->disk_name, sizeof(md->disk->disk_name),
+ "mmcblk%u%s", card->host->index, subname ? subname : "");
+
+ if (mmc_card_mmc(card))
+ blk_queue_logical_block_size(md->queue.queue,
+ card->ext_csd.data_sector_size);
+ else
+ blk_queue_logical_block_size(md->queue.queue, 512);
+
+ set_capacity(md->disk, size);
+
+ if (mmc_host_cmd23(card->host)) {
+ if ((mmc_card_mmc(card) &&
+ card->csd.mmca_vsn >= CSD_SPEC_VER_3) ||
+ (mmc_card_sd(card) &&
+ card->scr.cmds & SD_SCR_CMD23_SUPPORT))
+ md->flags |= MMC_BLK_CMD23;
+ }
+
+ if (mmc_card_mmc(card) &&
+ md->flags & MMC_BLK_CMD23 &&
+ ((card->ext_csd.rel_param & EXT_CSD_WR_REL_PARAM_EN) ||
+ card->ext_csd.rel_sectors)) {
+ md->flags |= MMC_BLK_REL_WR;
+ blk_queue_write_cache(md->queue.queue, true, true);
+ }
+
+ return md;
+
+ err_putdisk:
+ put_disk(md->disk);
+ err_kfree:
+ kfree(md);
+ out:
+ spin_lock(&mmc_blk_lock);
+ ida_remove(&mmc_blk_ida, devidx);
+ spin_unlock(&mmc_blk_lock);
+ return ERR_PTR(ret);
+ }
+
+ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card)
+ {
+ sector_t size;
+
+ if (!mmc_card_sd(card) && mmc_card_blockaddr(card)) {
+ /*
+ * The EXT_CSD sector count is in number or 512 byte
+ * sectors.
+ */
+ size = card->ext_csd.sectors;
+ } else {
+ /*
+ * The CSD capacity field is in units of read_blkbits.
+ * set_capacity takes units of 512 bytes.
+ */
+ size = (typeof(sector_t))card->csd.capacity
+ << (card->csd.read_blkbits - 9);
+ }
+
+ return mmc_blk_alloc_req(card, &card->dev, size, false, NULL,
+ MMC_BLK_DATA_AREA_MAIN);
+ }
+
+ static int mmc_blk_alloc_part(struct mmc_card *card,
+ struct mmc_blk_data *md,
+ unsigned int part_type,
+ sector_t size,
+ bool default_ro,
+ const char *subname,
+ int area_type)
+ {
+ char cap_str[10];
+ struct mmc_blk_data *part_md;
+
+ part_md = mmc_blk_alloc_req(card, disk_to_dev(md->disk), size, default_ro,
+ subname, area_type);
+ if (IS_ERR(part_md))
+ return PTR_ERR(part_md);
+ part_md->part_type = part_type;
+ list_add(&part_md->part, &md->part);
+
+ string_get_size((u64)get_capacity(part_md->disk), 512, STRING_UNITS_2,
+ cap_str, sizeof(cap_str));
+ pr_info("%s: %s %s partition %u %s\n",
+ part_md->disk->disk_name, mmc_card_id(card),
+ mmc_card_name(card), part_md->part_type, cap_str);
+ return 0;
+ }
+
+ /* MMC Physical partitions consist of two boot partitions and
+ * up to four general purpose partitions.
+ * For each partition enabled in EXT_CSD a block device will be allocatedi
+ * to provide access to the partition.
+ */
+
+ static int mmc_blk_alloc_parts(struct mmc_card *card, struct mmc_blk_data *md)
+ {
+ int idx, ret = 0;
+
+ if (!mmc_card_mmc(card))
+ return 0;
+
+ for (idx = 0; idx < card->nr_parts; idx++) {
+ if (card->part[idx].size) {
+ ret = mmc_blk_alloc_part(card, md,
+ card->part[idx].part_cfg,
+ card->part[idx].size >> 9,
+ card->part[idx].force_ro,
+ card->part[idx].name,
+ card->part[idx].area_type);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return ret;
+ }
+
+ static void mmc_blk_remove_req(struct mmc_blk_data *md)
+ {
+ struct mmc_card *card;
+
+ if (md) {
+ /*
+ * Flush remaining requests and free queues. It
+ * is freeing the queue that stops new requests
+ * from being accepted.
+ */
+ card = md->queue.card;
+ mmc_cleanup_queue(&md->queue);
+ if (md->disk->flags & GENHD_FL_UP) {
+ device_remove_file(disk_to_dev(md->disk), &md->force_ro);
+ if ((md->area_type & MMC_BLK_DATA_AREA_BOOT) &&
+ card->ext_csd.boot_ro_lockable)
+ device_remove_file(disk_to_dev(md->disk),
+ &md->power_ro_lock);
+
+ del_gendisk(md->disk);
+ }
+ mmc_blk_put(md);
+ }
+ }
+
+ static void mmc_blk_remove_parts(struct mmc_card *card,
+ struct mmc_blk_data *md)
+ {
+ struct list_head *pos, *q;
+ struct mmc_blk_data *part_md;
+
+ list_for_each_safe(pos, q, &md->part) {
+ part_md = list_entry(pos, struct mmc_blk_data, part);
+ list_del(pos);
+ mmc_blk_remove_req(part_md);
+ }
+ }
+
+ static int mmc_add_disk(struct mmc_blk_data *md)
+ {
+ int ret;
+ struct mmc_card *card = md->queue.card;
+
+ device_add_disk(md->parent, md->disk);
+ md->force_ro.show = force_ro_show;
+ md->force_ro.store = force_ro_store;
+ sysfs_attr_init(&md->force_ro.attr);
+ md->force_ro.attr.name = "force_ro";
+ md->force_ro.attr.mode = S_IRUGO | S_IWUSR;
+ ret = device_create_file(disk_to_dev(md->disk), &md->force_ro);
+ if (ret)
+ goto force_ro_fail;
+
+ if ((md->area_type & MMC_BLK_DATA_AREA_BOOT) &&
+ card->ext_csd.boot_ro_lockable) {
+ umode_t mode;
+
+ if (card->ext_csd.boot_ro_lock & EXT_CSD_BOOT_WP_B_PWR_WP_DIS)
+ mode = S_IRUGO;
+ else
+ mode = S_IRUGO | S_IWUSR;
+
+ md->power_ro_lock.show = power_ro_lock_show;
+ md->power_ro_lock.store = power_ro_lock_store;
+ sysfs_attr_init(&md->power_ro_lock.attr);
+ md->power_ro_lock.attr.mode = mode;
+ md->power_ro_lock.attr.name =
+ "ro_lock_until_next_power_on";
+ ret = device_create_file(disk_to_dev(md->disk),
+ &md->power_ro_lock);
+ if (ret)
+ goto power_ro_lock_fail;
+ }
+ return ret;
+
+ power_ro_lock_fail:
+ device_remove_file(disk_to_dev(md->disk), &md->force_ro);
+ force_ro_fail:
+ del_gendisk(md->disk);
+
+ return ret;
+ }
+
+ static const struct mmc_fixup blk_fixups[] =
+ {
+ MMC_FIXUP("SEM02G", CID_MANFID_SANDISK, 0x100, add_quirk,
+ MMC_QUIRK_INAND_CMD38),
+ MMC_FIXUP("SEM04G", CID_MANFID_SANDISK, 0x100, add_quirk,
+ MMC_QUIRK_INAND_CMD38),
+ MMC_FIXUP("SEM08G", CID_MANFID_SANDISK, 0x100, add_quirk,
+ MMC_QUIRK_INAND_CMD38),
+ MMC_FIXUP("SEM16G", CID_MANFID_SANDISK, 0x100, add_quirk,
+ MMC_QUIRK_INAND_CMD38),
+ MMC_FIXUP("SEM32G", CID_MANFID_SANDISK, 0x100, add_quirk,
+ MMC_QUIRK_INAND_CMD38),
+
+ /*
+ * Some MMC cards experience performance degradation with CMD23
+ * instead of CMD12-bounded multiblock transfers. For now we'll
+ * black list what's bad...
+ * - Certain Toshiba cards.
+ *
+ * N.B. This doesn't affect SD cards.
+ */
+ MMC_FIXUP("SDMB-32", CID_MANFID_SANDISK, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_BLK_NO_CMD23),
+ MMC_FIXUP("SDM032", CID_MANFID_SANDISK, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_BLK_NO_CMD23),
+ MMC_FIXUP("MMC08G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_BLK_NO_CMD23),
+ MMC_FIXUP("MMC16G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_BLK_NO_CMD23),
+ MMC_FIXUP("MMC32G", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_BLK_NO_CMD23),
+
+ /*
+ * Some MMC cards need longer data read timeout than indicated in CSD.
+ */
+ MMC_FIXUP(CID_NAME_ANY, CID_MANFID_MICRON, 0x200, add_quirk_mmc,
+ MMC_QUIRK_LONG_READ_TIME),
+ MMC_FIXUP("008GE0", CID_MANFID_TOSHIBA, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_LONG_READ_TIME),
+
+ /*
+ * On these Samsung MoviNAND parts, performing secure erase or
+ * secure trim can result in unrecoverable corruption due to a
+ * firmware bug.
+ */
+ MMC_FIXUP("M8G2FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+ MMC_FIXUP("MAG4FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+ MMC_FIXUP("MBG8FA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+ MMC_FIXUP("MCGAFA", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+ MMC_FIXUP("VAL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+ MMC_FIXUP("VYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+ MMC_FIXUP("KYL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+ MMC_FIXUP("VZL00M", CID_MANFID_SAMSUNG, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_SEC_ERASE_TRIM_BROKEN),
+
+ /*
+ * On Some Kingston eMMCs, performing trim can result in
+ * unrecoverable data conrruption occasionally due to a firmware bug.
+ */
+ MMC_FIXUP("V10008", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_TRIM_BROKEN),
+ MMC_FIXUP("V10016", CID_MANFID_KINGSTON, CID_OEMID_ANY, add_quirk_mmc,
+ MMC_QUIRK_TRIM_BROKEN),
+
+ END_FIXUP
+ };
+
+ static int mmc_blk_probe(struct mmc_card *card)
+ {
+ struct mmc_blk_data *md, *part_md;
+ char cap_str[10];
+
+ /*
+ * Check that the card supports the command class(es) we need.
+ */
+ if (!(card->csd.cmdclass & CCC_BLOCK_READ))
+ return -ENODEV;
+
+ mmc_fixup_device(card, blk_fixups);
+
+ md = mmc_blk_alloc(card);
+ if (IS_ERR(md))
+ return PTR_ERR(md);
+
+ string_get_size((u64)get_capacity(md->disk), 512, STRING_UNITS_2,
+ cap_str, sizeof(cap_str));
+ pr_info("%s: %s %s %s %s\n",
+ md->disk->disk_name, mmc_card_id(card), mmc_card_name(card),
+ cap_str, md->read_only ? "(ro)" : "");
+
+ if (mmc_blk_alloc_parts(card, md))
+ goto out;
+
+ dev_set_drvdata(&card->dev, md);
+
+ if (mmc_add_disk(md))
+ goto out;
+
+ list_for_each_entry(part_md, &md->part, part) {
+ if (mmc_add_disk(part_md))
+ goto out;
+ }
+
+ pm_runtime_set_autosuspend_delay(&card->dev, 3000);
+ pm_runtime_use_autosuspend(&card->dev);
+
+ /*
+ * Don't enable runtime PM for SD-combo cards here. Leave that
+ * decision to be taken during the SDIO init sequence instead.
+ */
+ if (card->type != MMC_TYPE_SD_COMBO) {
+ pm_runtime_set_active(&card->dev);
+ pm_runtime_enable(&card->dev);
+ }
+
+ return 0;
+
+ out:
+ mmc_blk_remove_parts(card, md);
+ mmc_blk_remove_req(md);
+ return 0;
+ }
+
+ static void mmc_blk_remove(struct mmc_card *card)
+ {
+ struct mmc_blk_data *md = dev_get_drvdata(&card->dev);
+
+ mmc_blk_remove_parts(card, md);
+ pm_runtime_get_sync(&card->dev);
+ mmc_claim_host(card->host);
+ mmc_blk_part_switch(card, md);
+ mmc_release_host(card->host);
+ if (card->type != MMC_TYPE_SD_COMBO)
+ pm_runtime_disable(&card->dev);
+ pm_runtime_put_noidle(&card->dev);
+ mmc_blk_remove_req(md);
+ dev_set_drvdata(&card->dev, NULL);
+ }
+
+ static int _mmc_blk_suspend(struct mmc_card *card)
+ {
+ struct mmc_blk_data *part_md;
+ struct mmc_blk_data *md = dev_get_drvdata(&card->dev);
+
+ if (md) {
+ mmc_queue_suspend(&md->queue);
+ list_for_each_entry(part_md, &md->part, part) {
+ mmc_queue_suspend(&part_md->queue);
+ }
+ }
+ return 0;
+ }
+
+ static void mmc_blk_shutdown(struct mmc_card *card)
+ {
+ _mmc_blk_suspend(card);
+ }
+
+ #ifdef CONFIG_PM_SLEEP
+ static int mmc_blk_suspend(struct device *dev)
+ {
+ struct mmc_card *card = mmc_dev_to_card(dev);
+
+ return _mmc_blk_suspend(card);
+ }
+
+ static int mmc_blk_resume(struct device *dev)
+ {
+ struct mmc_blk_data *part_md;
+ struct mmc_blk_data *md = dev_get_drvdata(dev);
+
+ if (md) {
+ /*
+ * Resume involves the card going into idle state,
+ * so current partition is always the main one.
+ */
+ md->part_curr = md->part_type;
+ mmc_queue_resume(&md->queue);
+ list_for_each_entry(part_md, &md->part, part) {
+ mmc_queue_resume(&part_md->queue);
+ }
+ }
+ return 0;
+ }
+ #endif
+
+ static SIMPLE_DEV_PM_OPS(mmc_blk_pm_ops, mmc_blk_suspend, mmc_blk_resume);
+
+ static struct mmc_driver mmc_driver = {
+ .drv = {
+ .name = "mmcblk",
+ .pm = &mmc_blk_pm_ops,
+ },
+ .probe = mmc_blk_probe,
+ .remove = mmc_blk_remove,
+ .shutdown = mmc_blk_shutdown,
+ };
+
+ static int __init mmc_blk_init(void)
+ {
+ int res;
+
+ if (perdev_minors != CONFIG_MMC_BLOCK_MINORS)
+ pr_info("mmcblk: using %d minors per device\n", perdev_minors);
+
+ max_devices = min(MAX_DEVICES, (1 << MINORBITS) / perdev_minors);
+
+ res = register_blkdev(MMC_BLOCK_MAJOR, "mmc");
+ if (res)
+ goto out;
+
+ res = mmc_register_driver(&mmc_driver);
+ if (res)
+ goto out2;
+
+ return 0;
+ out2:
+ unregister_blkdev(MMC_BLOCK_MAJOR, "mmc");
+ out:
+ return res;
+ }
+
+ static void __exit mmc_blk_exit(void)
+ {
+ mmc_unregister_driver(&mmc_driver);
+ unregister_blkdev(MMC_BLOCK_MAJOR, "mmc");
+ }
+
+ module_init(mmc_blk_init);
+ module_exit(mmc_blk_exit);
+
+ MODULE_LICENSE("GPL");
+ MODULE_DESCRIPTION("Multimedia Card (MMC) block device driver");
+
projects / kernel.git / commitdiff